SPECTRA Technologies T1000A5WCDMA EFT POS User Manual T1000 InstallationGuide CE apply 20160829

SPECTRA Technologies Holdings Co. Ltd. EFT POS T1000 InstallationGuide CE apply 20160829

15_T1000 UserMan r1

T1000EFT-POSInstallation GuideVersion 1.0SPECTRA TechnologiesISO9001 : 200820002812 QM08
1Installation Guide1. T1000 .............................................................................................. Layout & Function Descriptions of T1000 1.1 Main Unit & Accessories........................................................................................... 1.2 Features at a Glance................................................................................................. 1.3 Installation of SIM, SAM & Micro-SD Card.................................................................. 1.4 Battery Installation..................................................................................................... 1.5 Paper Feeding Procedure.......................................................................................... 2. How to Operate................................................................................6 2.1 Turn On/ Off Procedure............................................................................................. 2.2 Swipe Card & Insert Card..........................................................................................3. Rechargeable Battery Safety Guideline.........................................7 3.1 Prohibition.................................................................................................................. 3.2 Battery Operation & Charging Guideline.................................................................... 3.3 Terminal and Battery Storage Guideline..................................................................... 3.4 Accident Handling...................................................................................................... 3.5 Battery Disposal........................................................................................................4. Safety & Maintenance.....................................................................9 4.1 Basic Safety Practice.................................................................................................. 4.2 Safety Warning.......................................................................................................... 4.3 Location for Installation............................................................................................ 4.4 Maintenance............................................................................................................ 4.5 Trouble Shooting....................................................................................... ............. 5. Other Information..........................................................................13 Table of Content2344566 78888 9 91010112 T1000
T10002Installation GuideLayout & Function Descriptions of T100011.1 Main Unit & AccessoriesTerminal - for transaction processing, PINentry, printing, communication and otherperipheral interfaces such as ECRintegration3.6V Rechargeable Battery (Optional)Power Adaptor (Optional) LAN Port Cable (Optional)
3Installation Guide1.2 Features at a GlanceMagnetic Card Reader SlotLCD DisplayKeysPaper Outlet IC Card Reader SlotBatteryCompartmentLAN/ Modem or RS232communication port T1000Power PortJack for HandfreeEarpiece (optional) Paper TrayCoverPaper TrayLeverUSB Port (Slave) Reset Buttonfor ContactlessCard Readeroption only Status DisplayingLED Card Reading Area
4Installation Guide11.4 Battery Installationfor version equipped with battery pack only1.3 Installation of SIM, SAM & Micro-SD Card123124 T1000SIM Card Micro-SD Card SAM Card (Optional)(Optional)
5Installation Guide1.5 Paper Feeding Procedure T10001Lift up the Paper Tray Lever2Pull the Paper TrayLever backwardPlace the paper roll intothe tray as shown3Close the Paper Tray Cover457mm (2 ") 1 4 40mm Max.Paper roll size
6Installation GuideHow to Operate22.1 Turn On/ Off ProcedureOn - Power is on whenever plugged. If theterminal is unplugged, press the key forseveral seconds to turn on the terminal.When the terminal displays the applicationidle screen, it is ready for operation.2.2 Swipe Card & Insert CardOff - Disconnect the power adaptor. Keepon pressing the key for several secondsto turn off the terminal.If the terminal is equipped with charging battery during first time use, please connect the power adaptor and charge the battery for3 hours. Magnetic Card IC Card T1000
Rechargeable Battery Safety Guideline33.1 Prohibition: Improper handling of the Li-ion battery ishazardous, the following forbidden activities must be avoided:DO NOT use NON-SPECTRA provided batteryin SPECTRA POS Terminal7Installation GuideDO NOT use a charger that is not specificallydesigned to charge Lithium BatteryDO NOT operate the terminal, charge up orstore the battery under high temperature (underdirect sunlight or inside a roasting vehicle) orclose to heat source (fire, heater)DO NOT store the battery in the externalcharger. After charging up, the battery shouldbe removed, even though power isdisconnectedDO NOT use damaged battery, e.g. Swelled,case broken, strange odor and chemicalleakageDO NOT knock, crash or press the batteryDO NOT submerge the battery into waterDO NOT heat the battery or dispose in fireDO NOT solder the batteryDO NOT disassemble the batteryDO NOT short or puncture the battery3.2 Battery Operation & Charging GuidelineThe best temperature for battery operation is0 C ~ 40 C. DO NOT place the terminal in hotspace or poor ventilated space. Ensure goodventilation for coolingDO NOT leave battery un-attended whencharging. You should closely monitor thecharging process & react to potential problemshould they occurDo always check that batteries are physicallyand electrically undamaged before charge ordischargeBattery charging must be kept away frominflammable material and on a non conductiveand nonflammable stable surface by:> Terminal built-in charger: install battery to the terminal, then apply power.> SPECTRA supplied external chargerWhen new terminal is received, please chargethe battery fully upIf the battery gauge indicates battery low,charge up the battery at onceBattery always self-discharges. Long period ofdischarging will deteriorate the capacity and lifeof the battery. Please re-charge the battery weekly for normal operation T1000
8Installation Guide3.3 Terminal and Battery Storage GuidelineIf the battery will not be used for a long period,please charge it to only 50% of the batterycapacity (battery indicator displays half full,2 units); remove it from the terminal and storein a cool place. This can minimize the lifedeterioration caused by self-dischargeDO NOT store bare battery together with metal,avoid humid and hot storageDuring storage period, please recharge thebattery once every 3 months3.4 Accident HandlingDuring charging, if the battery or the chargerexhibits any abnormity such as overheat,fuming, swelling & chemical leakage,disconnect power immediately, remove thebattery from the charger, put it in a safe placeand advise the supplierLi-Polymer Battery does not contain liquidelectrolyte. Just in case human body touchesthe electrolyte, rinse with water and seekmedical advice immediatelyBatteries having electrolyte leakage orchemical odor must be distant from fire sourceto prevent explosionIf accidentally short the battery, put it in anon-conductive container and keep it awayfrom flammable objects3.5 Battery DisposalProtect your lovely Planet, please dispose theold batteries according to Governmentregulations T1000
Safety & Maintenance44.1 Basic Safety Practice4.2 Safety WarningWhile using T1000 and its accessories,please follow the safety instruction to avoidfire, electric shock and personal injury.Read this instruction in detailDisconnect the power and accessories beforecleaning, use dry flannelette and soft brushfor cleaningDo not put the terminal near waterDo not spray any liquid onto the terminalFor desktop purpose, put the terminal onstable platform to avoid damage by dropKeep the terminal away from high temperatureand poor ventilation areaEnsure electricity supply is safe and stableTo avoid electric shock, do not disassemblethe terminal by yourself. Send it to agency forrepairing if necessary Do not use T1000 and its accessories duringexplosive gas leakageFor modem version, do not install telephoneline during lightingIf possible, disconnect telephone line beforestorming to avoid electric shockFor the following cases, disconnect power,other accessories and send for repairing,~ Damage on power cable or plug~ Liquid get into pinpad~ Pinpad gets wet in raining~ Still abnormal function after following all the instruction mentioned ~ Pinpad broken~ Pinpad obvious abnormal Using the provided T1000 power adaptor to power the terminal 9Installation GuideDuring using wireless communication, keephuman body at least 1.5 cm apart from theterminal. Keep the terminal away from otherantenna or wireless device.Do not touch the thermal printer head andpaper cutter T1000
10Installation Guide4.3 Location for Installation4.4 Maintenance Should be safe and convenient for operators and users Should be placed on stable working platform during desktop operation for ease of power and accessories connection Good ventilation and should have 22cm space around the pinpad DO NOT expose the terminal in following environment ~ Near electrical appliance with high frequency EM wave such as air conditioner, electric fan, motor, neon sign etc.~ Liquid container such as water trough, sink, pond etc. ~ High temperature or humidity place~ High containing of VOC, salty and dusty area~ Sunlight or high thermal radiation area~ Near demagnetizing system and magnetic security systemT1000 has been designed to provide stableservice for users with less maintenance.In order to ensure best performance, wesuggested the followings. Avoid exposing in sunlight, high temperature, high humidity and dusty area Keep in dry, clean and tidy environment Do not keep in extreme hot and cold place Do not disassemble the AC/DC power adaptor Do not impact and thrash the terminal heavily Do not disassemble the terminal (except opening the Battery Cover). Disassembling will erase all data and lead to abnormal runningCleaning of T1000 Use flannelette to remove dust on terminal Use mild alcohol to remove stubborn stains If possible, use low pressure blower to blow out dust on keypad Use flannelette or lens cleaning paper to clean the display T1000
11Installation GuidePrinter Cleaning Disconnect power cable from the terminalSend for repairing If it is necessary to send back T1000 for repairing, please contact agency, pack the terminal properly (use original packing material if possible) to avoid damage during transportation Open printer cover, take out paper and roller Remove dust and paper scrap inside paper tray . Use low pressure blower to clean the paper tray if possible. Do not touch the thermal printer head and paper cutter during cleaning Put back paper and roller into paper tray Close the printer cover4.5 Trouble ShootingT1000 has been designed to provide stableservice for users. However, there would besome minor problems during in use. Beforesending back for repairing, users can try thefollowing simple procedures to fix theproblems themselvesTerminal not function1, If it is powered by power adaptor, check whether the connection of power cord or power adaptor is connected properly 2, If it is powered by power adaptor, try to check whether the AC source is error free by plugging with other electrical appliance3, If it is powered by power adaptor, try to replace the adaptor with another one4, If it is powered by power adaptor, try to replace the electric power socket with another one5, Try to adjust the LCD contrast6, Contact agency if problem cannot be solvedUnsuccessful transaction1, Try to use other magnetic card or IC card for transaction2, Check whether the way of swiping card or inserting card is correct3, Check whether all wire ends are connected properly4, Contact agency if problem cannot be solved T1000
12Installation GuideMalfunction on magnetic card reader1, Check whether the way of card swiping is correct, speed is normal, please refer to section 2.22, Try to swipe in opposite direction3, Try to use another card4, Contact agency if problem cannot be solvedMalfunction on IC card reader1, Check whether the way of card insertion is correct, please refer to section 2.22, Check whether the card is completely inserted3, Try to use another card4, Contact agency if problem cannot be solvedMalfunction on printer2, If it is powered by power adaptor, check whether the connection of power cord or power adaptor is connected properly1, If the terminal is powered by battery, check the battery level and charge the battery, replace new battery or else power the terminal by adaptor.3, Open printer cover, check whether the paper is used up4, Check whether the way of paper feeding is correct, please refer to section 1.55, The printer accepts thermal paper only, check whether the paper roll is the correct type, please refer to section 1.5 6, Check whether the paper is jammed or damaged. Try to open the printer cover and smooth the paper path. 7, Contact agency if problem cannot be solved T1000
13Installation GuideDimensions & Weight Size: 171 (L) x 88 (W) x 61 (H) mm Weight: 480g (Terminal with battery)Operating environment Temperature: 0 C - 40 C Humidity: 0% - 85% (non-condense)Other Information5 DC 9.5V, 2.4APower input T1000 (Excluded protruded part)This product complies with the following standardsMessage for product approvalCE approvalFCC approvalEU Regulatory Conformance Hereby, SPECTRA Technologies HoldingsCo., Ltd. declares that this device is in compliance with the essentialrequirements and other relevant provisions of Directive 1999/5/EC.Safety Information and NoticesFailure to comply with the following precautions may be dangerous orillegal.Never attempt to disassemble your phone. You alone are responsiblefor how you use your BT Smart Watch and any consequences of itsuse.As a general rule, always switch off your BT Smart Watch wherever theuse of a BT Smart Watch is prohibited. Use of your BT Smart Watch issubject to safety measures designed to protect users and theirenvironment.Do not use your BT Smart Watch in damp areas (bathroom, swimmingpool…). Protect it from liquids and other moisture.The max. recommended temperature is +40°C. This manual is subject to change without prior notice0700F C C I D : V W Z T 1 0 0 0 I
Unit 1301-09,19-20, Tower II, Grand Century Place,193 Prince Edward Road West, Kowloon, Hong KongTel : (852) 2319 2918Fax: (852) 2319 2631SPECTRA TECHNOLOGIES HOLDINGS CO.LTD.www.spectratech.comT1000EFT-POS
FCC RF EXPOSURE INFORMATION: WARNING!! Read this information before using your EFT POS In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this EFT POS complies with the FCC guidelines and these international standards. Use only the supplied or an approved antenna. Unauthorized antennas modifications, or attachments could impair call quality, damage the EFT POS, or result in violation of FCC regulations. Do not use the EFT POS with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna. BODY-WORN OPERATION: This device was tested for typical body-worn operations with the back/front of the EFT POS kept 0cm from the body. To comply with FCC RF exposure requirements, a minimum separation distance of 0cm must be maintained between the user's body and the back/front of the EFT POS, including the antenna. Third-party belt-clips, holsters and similar accessories containing metallic components shall not be used. Body-worn accessories that cannot maintain 0cm separation distance between the user’s body and the back/front of the EFT POS, and have not been tested for typical body-worn operations may not comply with FCC RF exposure limits and should be avoided. For more information about RF exposure, please visit the FCC website at www.fcc.gov Your EFT POS is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. In August, 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless EFT POSs. Those guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies: <ANSIC95.1> (1992) / <NCRP Report 86> (1986) / <ICNIRP> (1999) Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. For example, over 120 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the available body of research to develop the ANSI Standard (C95.1). Nevertheless, we recommend that you use a hands-free kit with your EFT POS (such as an earpiece or headset) to avoid potential exposure to RF energy. The design of your EFT POS complies with the FCC guidelines (and those standards). Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the EFT POS and may violate FCC regulations. NORMAL POSITION: Hold the EFT POS as you would any other EFT POS with the antenna pointed up and over your shoulder. RF Exposure Information: This product is compliance to FCC RF Exposure requirements and refers to FCC website https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm search for FCC ID: VWZT1000A5WCDMA Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help

Navigation menu