SSV Works MRB3 MRB3 Wired Remote and Black Box User Manual

SSV Works, Inc MRB3 Wired Remote and Black Box

User Manual

User GuideMRB3Bluetooth® Media ControllerCorporate: SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030Web: www.SSVworks.com | Phone: 818-991-1778 | Fax: 866-293-6751The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,Inc. and any use of such marks by SSV Works is under license. © 2016 SSV Works, Oxnard, CA 93030 MRB3 Rev. B 3-22-16Do not attempt to disassemble or repair the MRB3 yourself. Please call SSV Works for technical assistance or repair information. Changes or modications to the MRB3 not authorized by SSV Works will void the warranty.SSV Works recommends disconnecting the negative battery terminal before beginning any installation.SAFETY INFORMATION!RADIO FUNCTIONSCONNECTING AN EXTERNAL AUDIO DEVICE (OPTIONAL)BLUETOOTH AUDIO STREAMINGMRB3WARRANTY INFORMATION:All SSV Works enclosures are covered by a limited lifetime warranty against defects in material or workmanship. All SSV Works Electronics are covered by a limited 1 year warranty against defects in material or workmanship. Labor for replacement of defective components is not covered. All SSV Works Speakers are covered by a limited 1 year warranty against defects in material or workmanship. Contact SSV Works for further warranty information.Selecting FM/AM Band: Press MODE until the FM or AM band shows on the display. Automatic Station Search: Press or to start automatic station search. The search stops when a station is found.Manual Station Search: Press and hold or until M - SEEK. Press the or briey to change the frequency until the desired frequency is set. Change to Automatic search (A - SEEK) mode after a station is found.- Press MODE until AUX shows on the display.Add 3.5mm AUX-in and USB Charging with SSV Works 3PUSB35A (sold separately)1. Open the Bluetooth setup program on the mobile device and activate the Bluetooth feature2. The device will show up as “SSV”. Select this device and enter passkey: OOOO3. After successfully pairing, a Bluetooth logo will appear on the phone menu screen and show “CONNECT” “BT MUSIC” on the device LCD display.Stop Playback: Press briey to pause music. Press button again to continue playback.Skip Track: Press or to play previous/next song.Line in
MRB31. Play/Pause Power On/Off Mute2. Volume Up/Down3. Mode4. Track Forward/Back Station Forward/Back Menu Settings Up/Down5. LCD DisplayBUTTON LOCATIONS AND FUNCTIONSGENERAL OPERATIONS15342AMPLIFIER WIRING DIAGRAMUSB chargeLine out/Ext. amp triggerWire control panelAntennaLine inRear speakerFront speakerRight (Red)Signal groundAMP turn on Left (White)Signal ground (Black)Left (White)Right (Red)Rear left(-) Green/BlackRear left(+) GreenRear left(-) Green/BlackRear right(-) Purple/BlackRear right(+) PurpleFront left(+) WhiteFront left(-) White/BlackFront right(+) GreyFront right(-) Grey/BlackRear left(+) GreenRear right(-) Purple/BlackRear right(+) PurplePower connectorYellow12ABlackBlackBackup yellowFront left(-) White/BlackFront left(+) WhiteFront right(-) Grey/BlackFront right(+) Greycan’t read USB datacharge only12v+ Yellowdoes not readUSB dataUSB 1A charge inputSignal ground(Black)AMP turn on(Blue)Power On/Off: Press to power on. Press and hold to power off. Volume: Press the VOL(+) or (-) button to increase or decrease the volume.Mute On/Off: Press briey to mute the sound. Press again to un-mute the sound. Mode Sources: Press the MODE button to switch between AUX, FM, AM, Bluetooth (BT MUSIC).Mode Settings (Bass/Treble/Balance/Fader/EQ/Loudness): Press the MODE button for 2 seconds and then press the button until the function you want is shown on the display. Press VOL(+) (-) to change the settings of the menu item displayed.Bass (BAS)/Treble (TRE): Press the VOL(+) or (-) button to adjust Bass & Treble.Balance (BAL): Press VOL(+) or (-) to adjust balance (sound distribution between the right and left speakers).Fader (FAD): Press VOL(+) or (-) to adjust sound distribution between the front and rear speakers.Equalizer (EQ): Press VOL(+) or (-) to select one of the EQ options: OFF, FLAT, CLASS, POP, ROCK, JAZZ, METAL. The equalizer will be disabled if EQ OFF is set. The equalizer setting is shown at the bottom of the display.Loudness (LOUD): Press VOL(+) or (-) (LOUD ON) or to disable the function (LOUD OFF). When the loudness function is on, LOUD is shown on the right of the display.2 sec.MODE BASS TRE BAL FAD EQ LOUD
USB chargeLine out/Ext. amp triggerWire control panelAntennaLine inRear speakerFront speakerRight (Red)Signal groundAMP turn on Left (White)Signal ground (Black)Left (White)Right (Red)Rear left(-) Green/BlackRear left(+) GreenRear left(-) Green/BlackRear right(-) Purple/BlackRear right(+) PurpleFront left(+) WhiteFront left(-) White/BlackFront right(+) GreyFront right(-) Grey/BlackRear left(+) GreenRear right(-) Purple/BlackRear right(+) PurplePower connectorYellow12ABlackBlackBackup yellowFront left(-) White/BlackFront left(+) WhiteFront right(-) Grey/BlackFront right(+) Greycan’t read USB datacharge onlyTechnical speci ications87.5-107.9MHz200kHz2.8μV30dBTUNER FM FrequencyRangeChannelStepSensitivityStereoSeparationSignaltoNoiseRatio50dBThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC CautionAny Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Navigation menu