ST Engineering Telematics Wireless FP102TA ASTM transponder User Manual FP102TA Usrman

Telematics Wireless Ltd. ASTM transponder FP102TA Usrman

manual

User Manual FP102TA-HS
Important notes: 1. The user or the installer should be aware that changes and modifications not expressly approved by Telematics-Wireless could void the user’s authority to operate the equipment. 2. The transponder must be installed to provide minimum separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter
Installing your Transponder 1. Position your transponder on the windshield behind the rearview mirror, 2” to 4” below the upper edge of the windshield. 2. If the windshield is divided, the transponder should be placed at least 2” away from the windshield separation line 3. Clean the surface with the provided alcohol pad and let it dry for a few minutes. 4. Remove protective liner to expose adhesive tape. 5. Affix the Transponder onto the windshield. Press firmly against the windshield for 10 seconds. 6. Wait for 2 hours for optimal adhesion of the transponder onto the windshield.

Navigation menu