ST Engineering Telematics Wireless WB1 Low Cost Water Meter Repeater User Manual

Download:
Mirror Download [FCC.gov]
Document ID	821574
Application ID	MzwlT5JclwqKBvbS+3Bdqg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.45kB (55687 bits)
Date Submitted	2007-07-27 00:00:00
Date Available	2007-07-27 00:00:00
Creation Date	2007-07-05 13:38:08
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2007-07-05 13:38:57
Document Title	Users Manual

101 REGENCY PARKWAY
MANSFIELD, TX 76063
817-842-8000
FAX 817-842-8100
Dialog - Booster Installation Instructions
Field Operations
Factory Default Parameters
Magnet
Position the magnet on the Booster Status
FH Tx On
initialization
Booster cone for 3
Buzzer
On
seconds
Magnet activation
On
Learning the Pit
Install the Booster into the
3G Meters
pit within 30 seconds
Booster is Ready
This process is done
to Transmit
automatically. After 5-6
Magnet
minutes The Booster is
Positioning
ready to transmit
FCC ID:
NTAWB1
The User and the Installer should be aware that changes and modifications to the equipment
not expressly approved by Master Meter could void warranty and the user's authority to operate
the equipment.
Professionally trained personnel should install the equipment.
ATTENTION:
The digital portion of the transceiver has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1.) Reorient or relocate the receiving antenna.
2.) Increase the separation between the equipment and receiver.
3.) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4.) Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Note: Dialog Booster is designed only for Master Meter meters with Dialog registers.
101 REGENCY PARKWAY
MANSFIELD, TX 76063
817-842-8000
FAX 817-842-8100
Installation
3G Meter in a Pit-set to be learned by Booster
Locate the Booster Unit near the Pit-Set
Face the Magnet on the Booster Cone
Wait for 3 seconds until its Beep
Insert and Install the Booster into the Pit-Set Lid
Position the assembled Pit-Set Lid with the
Booster unit back on the Pit
(After the Beep)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2007:07:05 13:38:08
Producer                        : Acrobat Distiller 4.05 for Windows
Modify Date                     : 2007:07:05 13:38:57+03:00
Page Count                      : 2

EXIF Metadata provided by EXIF.tools