STI UB 1 Universal Button Installation UB1Install

User Manual: STI UB-1 Universal Button Installation Installation Instructions

Open the PDF directly: View PDF .
Page Count: 8

Download
Open PDF In Browser	View PDF

UB-1 Universal Button

UB-1/LTUL Universal Button with Latching Timer

ADA

Compliant

ADA
For UB-1/LTUL the enclosed timer is to be used and installed per the enclosed LT-1UL installation
sheet.
Compliant
For access control installations, power for the LT-1UL Timer must be supplied by a power source listed to
UL294. When used for access control, this device shall be used as part of an access controlled egress door
system. It is up to the local AHJ to allow use of this device in place of an automatic sensor. For higher security
installations, lower time limits should be used.
Pour les modèles UB-1/LTUL, la minuterie intégrée doit être installée et utilisée suivant la fiche d’installation
LT-1UL fournie. Pour les installations de contrôle d’accès, l’alimentation de la minuterie LT-1 doit être fournie
par une source homologuée UL294. Lorsque cet appareil est utilisé aux fins de contrôle d’accès, il doit faire
partie d’un système de porte de sortie à accès contrôlé. Il incombe donc à l’AHJ local d’autoriser l’utilisation
de cet appareil au lieu d’un capteur automatique. Pour les installations de sécurité plus renforcée, des délais
inférieurs doivent être utilisés.

We protect the things that protect you.®

NOTES

TOP TAB

It is important to read, understand and follow all instructions provided with this product. It
is the installer’s responsibility to comply with NFPA 70 & 101, NEC, mounting specifications
according to ADA and other applicable electrical codes. For Type SM (Self Monitored) rating,
the term Emergency message may be installed on Model UB-1 when used in a system
with a Listed, compatible Releasing Device. All other applications are rated Type NM (NonMonitored) for non-emergency signaling. To avoid electrical shock, DO NOT attempt to install
this product when power is on. ADA mounting compliance requires the operable part of
the initiating device shall not be less than 3 1/2 ft. (1.1m ) or greater than 4 1/2 ft. (1.37m)
above finished floor surface. After installation and testing are complete, provide a copy of
this manual to all personnel responsible for testing and maintenance of this product.
REMARQUES
Il est important de lire, de comprendre et de suivre
toutes les instructions fournies avec ce produit. Il
incombe à l’installateur de se conformer aux normes
NFPA 70 et 101, NEC, aux spécifications de montage
selon l’ADA et aux autres codes de l’électricité en
vigueur. Pour les cotes de type SM (auto surveillée),
4.830 in.
le message d’Urgence peut être apposé sur le modèle
(123mm)
UB-1 lorsqu’il est utilisé dans un système intégrant
un dispositif de déclenchement compatible et
homologué. Toutes les autres applications sont cotées
de Type NM (non surveillée) pour la signalisation non
urgente. Pour éviter un choc électrique, NE tentez
3.220 in.
PAS d’installer ce produit lorsqu’il est sous tension.
(82mm)
.867 in. 1.328 in.
La conformité aux règles d’installation de l’ADA exige
(22mm)(34mm)
que la partie utilisable du dispositif de déclenchement
soit installée à une hauteur située entre 3 1/2 pi (1,1
m) et 4 1/2 pi (1,37 m) au-dessus du plancher fini.
Une fois l’installation et les essais terminés, vous devez fournir une copie de ce manuel à l’ensemble du
personnel chargé de l’essai et de l’entretien de ce produit.

SWITCH RATING
2 Momentary Independent Form “C” contacts
UB-1/rated at: 10A, 1/2 HP, 125/250 VAC
6A, 30 VDC
100,000 Operations
Temperature: -40° to 185°F (-40° to 85°C)
-2-

Model UB-1/LTUL
Form C contacts on
Timer rated:
30 VDC 3A, 1.0 pf

NEW DRAWING

1. TO CHANGE BUTTON COLOR AND ROUND MESSAGE
NEW DRAWING

ER
SPRING

Power In
12–30 VDC/VAC
Safety Tech. Int’l Inc.
P/N UB-11. Ver 1.0
wwyy

Power In
12–30 VDC/VAC
Safety Tech. Int’l Inc.
P/N UB-11. Ver 1.0
wwyy

CAP

1. Choose button message and color. If same as
existing, proceed to 2.
NEW DRAWING
2. To remove push button actuator assembly, pinch
together actuator tabs in direction of arrows shown
above and push through plate.
3. Push actuator through plate.
SPRING
4. Align actuator cap to push button actuator. Align button
slots to tabs on push button actuator.
5. Snap button onto push button actuator and rotate right
to lock.
OP TAB
6. Insert spring into push button actuator. CAP
BUTTON
ACTUATOR
7. Pinch legs of push button actuator
and align
into die
plate.
RILL OUT THEcast
(4) MOUNTING

ACTUATOR

BUTTON

ACTUATO

Power In
12–30 VDC/VAC

Safety Tech. Int’l Inc.
P/N UB-11. Ver 1.0
wwyy

OLES, ONE IN EACH CORNER,
ING 5/32 in. DRILL BIT

2. CHANGE TOP MESSAGE

Refer to notes on pg. 2 for “EMERGENCY”
message use.

UB-1L LED PCB
NYLON WASHER
SELF TAPPING SCREW

KBOX MUST BE MOUNTED
1. Remove LED
H ARROWS POINTING UP

circuit board.
2. Remove current message by pushing in
and down on tabs 1 and 2 with a small
screwdriver. If necessary, also push in and
down on tabs 3 and 4. Once message is
loose, remove from the front of the plate.
3. Select new message and snap into place.
Blank plates are included to create your
own custom message.
4.830 in.
-3-

(123mm)

1

3

SCREWDRIVER
2

4

3. INSTALL OR REMOVE CONTACT BLOCK
INSTALL
To attach, align tabs (as shown) and gently snap top,
then bottom. Be sure to hear BOTH tabs snap into
place. (Can be reversed if wiring comes from the top
of the box.)

TOP TAB

REMOVE
Repeat STEP A for the top and bottom tab before removing contact block.
Step A: Position small flat screwdriver blade under tab and gently rotate until tab disengages.
The contact block will rotate a little. Do NOT pull yet.
Step B: Repeat for opposite tab.
Step C: When both tabs are disengaged, pull the contact block straight off.

STEP A COMPLETED
4.830 in.
(123mm)

A

3.220 in.
(82mm)

STEP A

.867 in. 1.328 in.
(22mm)(34mm)

B

STEP B

STEP C

-4-

4. ATTACH POWER FOR MESSAGE LED (if desired)
(See drawing)
SW1
NC
COM
NO

TO SUPERVISED STATION
OR AUXILLARY DEVICE

SW2

MAG LOCK

BUTTON LED

LED –

COM
NO
NC

MESSAGE LENS PCB

SWITCH 2
SWITCH 1

NC
COM
NO

LED +

12–24VDC

MAGNETIC LOCK
BUTTON LAMP
MESSAGE LAMP

NORMAL POSITION
ON
ON
OFF

BUTTON ACTIVATED
OFF
OFF
ON

DIFFUSER

NOTE
UB-1L LED
LED connection:
ThePCB
polarity shown is factory installed. LED is polarity sensitive. If LED
does not light, switch positive and negative wiring or remove LED and rotate 180°. 24 volt is
included and will operate on 12 volts; however not as bright. 12 volt LED’s are also available.
Power In
12–30 VDC/VAC

Safety Tech. Int’l Inc.
P/N UB-11. Ver 1.0
wwyy

-5-

12–24VDC

NORMAL POSITION BUTTON ACTIVATED
5. SURFACE
MOUNT
OPTION OFF
MAGNETIC
LOCK
ON
OFF
BUTTON LAMP
ON
ON
MESSAGE LAMP DRILL (4)
OFF

LED PCB

3/16 in.
DIAMETER HOLES

#8-10 7/8 in. ANCHOR
(4) PROVIDED
DIFFUSER
DRILL POINT PROVIDED TOP & BOTTOM
FOR 1/2 in. CONDUIT. DRILL AS NEEDED.
#6 x 1 1/4 in.
PHILLIPS PAN HEAD SCREW
(4) PROVIDED

Power In
12–30 VDC/VAC
Safety Tech. Int’l Inc.
P/N UB-11. Ver 1.0
wwyy

OVAL
W
KIT-71100A-COLOR
BACKBOX

#6-32 x 1 in. PHILLIPS
OVAL HEAD MACHINE SCREW
18-8 SS(2) PROVIDED

DRILL OUT THE (4) MOUNTING
HOLES, ONE IN EACH CORNER,
USING 5/32 in. DRILL BIT

BACKBOX MUST BE MOUNTED
WITH ARROWS POINTING UP

.867 in.
(22mm)

1.575 in.
(40mm)

-6-

6. MOUNT BUTTON ONTO ELECTRICAL BOX OPTION

DRILL
3/16
DIAMETER HO

19085 #6 - 32 x 1” OVAL
HEAD MACHINE SCREW
(2) PROVIDED

7. CUSTOM LABELS
To create your own custom label, size to fit in .48h x 2.23w as shown below.
Also available online at: www.sti-usa.com/ublabel

.48 in.

2.23 in.

WARRANTY
Three year guarantee against breakage of polycarbonate in normal use (one year on
electro mechanical and electronic components).
Electronic warranty form at www.sti-usa.com/wc14.
-7-

ACCESSORIES
PART #
KIT-UB-1C
KIT-71100A-COLOR (red, blue, green, white or yellow)

DESCRIPTION
CONTACT BLOCK
COLORMATCH BACKBOX KIT

UB-1CL-COLOR (blue, green, white or yellow)

CUSTOM LABEL APPLIED TO
BLANK MESSAGE PLATES

E10147
E10145
E10141
E10143

24 VOLT LED
WHITE (STANDARD)
RED
BLUE
GREEN

E10144
E10140
E10142

12 VOLT LED
RED
BLUE
GREEN

STI-6518
STI-13000 SERIES
STI-1100 SERIES

COVERS
BOPPER STOPPER
UNIVERSAL STOPPER
STOPPER II

– SEE WEBSITE FOR COMPLETE COVER DETAILS –

2306 Airport Rd • Waterford, MI 48327, USA
Phone: 248-673-9898 • Fax: 248-673-1246
info@sti-usa.com • www.sti-usa.com

Safety Technology International Ltd

Taylor House • 34 Sherwood Road • Bromsgrove
Worcestershire • B60 3DR • England • Tel: +44 (0)1527 520 999
Fax: +44 (0)1527 501 999 • info@sti-europe.com • www.sti-europe.com
Printed in USA				

Inst. Sht. UB-1 Button FEB2016



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00
Create Date                     : 2016:12:02 09:05:08-05:00
Metadata Date                   : 2016:12:02 09:05:22-05:00
Modify Date                     : 2016:12:02 09:05:22-05:00
Creator Tool                    : Adobe InDesign CS5 (7.0.4)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 11442 bytes, use -b option to extract), (Binary data 12157 bytes, use -b option to extract)
Instance ID                     : uuid:b71f36b7-e1b6-dc46-ad93-91671ac88863
Document ID                     : xmp.did:14F5F69DCD2468118A6DB63413D72EF3
Original Document ID            : xmp.did:21F9AAD0132068118083BDAE6BF072A7
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:21F9AAD0132068118083BDAE6BF072A7, xmp.iid:22F9AAD0132068118083BDAE6BF072A7, xmp.iid:23F9AAD0132068118083BDAE6BF072A7, xmp.iid:25F9AAD0132068118083BDAE6BF072A7, xmp.iid:28F9AAD0132068118083BDAE6BF072A7, xmp.iid:2700593E152068118083BDAE6BF072A7, xmp.iid:48EA904D152068118083BDAE6BF072A7, xmp.iid:51EA904D152068118083BDAE6BF072A7, xmp.iid:425BA071152068118083BDAE6BF072A7, xmp.iid:94A430A0152068118083BDAE6BF072A7, xmp.iid:106FD5DC152068118083BDAE6BF072A7, xmp.iid:4C7524AD15206811808396165AE34B05, xmp.iid:2F711A5DAD216811808396165AE34B05, xmp.iid:6896A3D5AD216811808396165AE34B05, xmp.iid:2FB9E6F9AD216811808396165AE34B05, xmp.iid:3A680072AE216811808396165AE34B05, xmp.iid:97197657AF216811808396165AE34B05, xmp.iid:4F0B2E08B0216811808396165AE34B05, xmp.iid:14B82F08B2216811808396165AE34B05, xmp.iid:C7385AF1D12068118083C753895ED091, xmp.iid:1ED484A9D82068118A6DF292CE5797BC, xmp.iid:86940F05F92368118A6D800ED83056AA, xmp.iid:7F7D441EF92368118A6D800ED83056AA, xmp.iid:17417F43F92368118A6D800ED83056AA, xmp.iid:104726DAFF2368118A6D800ED83056AA, xmp.iid:59F67398DB20681180839E07B62785E0, xmp.iid:2969DE13DC20681180839E07B62785E0, xmp.iid:90E9C379D42068118083E082229851D9, xmp.iid:91E9C379D42068118083E082229851D9, xmp.iid:F4A0021AFD2368118083E082229851D9, xmp.iid:3CAF91A7072068118083D0DCEF68C268, xmp.iid:84B14687B221681180839FC5F8AE42FF, xmp.iid:7F07993BBF24681180839FC5F8AE42FF, xmp.iid:24D4AA1EC024681180839FC5F8AE42FF, xmp.iid:830B7B0AC124681180839FC5F8AE42FF, xmp.iid:150DB5F29825681180839FC5F8AE42FF, xmp.iid:B81E5F329F25681180839FC5F8AE42FF, xmp.iid:64F1ABEE4926681180839FC5F8AE42FF, xmp.iid:74142D3AD42068118083F42E62DC06FF, xmp.iid:9A5ED2051B2068118083CF83D8286070, xmp.iid:05747C9CC72468118A6DB63413D72EF3, xmp.iid:14F5F69DCD2468118A6DB63413D72EF3, xmp.iid:6C0739EECD2468118A6DB63413D72EF3, xmp.iid:08B4F3A0CE2468118A6DB63413D72EF3, xmp.iid:C55FCC48CF2468118A6DB63413D72EF3, xmp.iid:7FB3047CCF2468118A6DB63413D72EF3, xmp.iid:E89B5429D12468118A6DB63413D72EF3, xmp.iid:B75EE7C28C2568118A6DB63413D72EF3, xmp.iid:EFE986C88C2568118A6DB63413D72EF3, xmp.iid:F0E986C88C2568118A6DB63413D72EF3, xmp.iid:301D86868D2568118A6DB63413D72EF3, xmp.iid:F2C1C3D18D2568118A6DB63413D72EF3, xmp.iid:DB694C8F8E2568118A6DB63413D72EF3, xmp.iid:F6C131EB8E2568118A6DB63413D72EF3, xmp.iid:E541E4198F2568118A6DB63413D72EF3, xmp.iid:7CA05FEC912568118A6DB63413D72EF3, xmp.iid:2EAC5421922568118A6DB63413D72EF3, xmp.iid:3180EE32922568118A6DB63413D72EF3, xmp.iid:3280EE32922568118A6DB63413D72EF3, xmp.iid:26CC9463952568118A6DB63413D72EF3, xmp.iid:6FE9C647962568118A6DB63413D72EF3, xmp.iid:D419F9B1962568118A6DB63413D72EF3, xmp.iid:D519F9B1962568118A6DB63413D72EF3, xmp.iid:A16DB5130B20681188C6BD31F16ABCDE, xmp.iid:14D75601112068118C149D2A15CBA213, xmp.iid:F243037B132468118083947E6F4DB5AC, xmp.iid:41B740E87E2968118083FF04F84918BC, xmp.iid:43B740E87E2968118083FF04F84918BC, xmp.iid:F1263273A32468118C148D271BCDBBC7, xmp.iid:F2263273A32468118C148D271BCDBBC7, xmp.iid:313C78CEA32468118C148D271BCDBBC7, xmp.iid:732314740720681180838DD9B97D58C7, xmp.iid:66F4CBF20720681180838DD9B97D58C7, xmp.iid:DB9C98562020681180838DD9B97D58C7, xmp.iid:60B9CE652220681180838DD9B97D58C7, xmp.iid:61B9CE652220681180838DD9B97D58C7, xmp.iid:181BACFE2320681180838DD9B97D58C7, xmp.iid:191BACFE2320681180838DD9B97D58C7, xmp.iid:F6C231000A2068118083808E2924E285, xmp.iid:AE2DAF4B1D2068118083808E2924E285, xmp.iid:1B39C8D5DE2068118083808E2924E285, xmp.iid:43CF5B692E2368118C14E74692559475, xmp.iid:F2ADCFB8932568118C14AC8C8C81AAEF, xmp.iid:8EC960660D20681180838532B292E221
History When                    : 2011:07:25 09:50:18-04:00, 2011:07:25 09:51:02-04:00, 2011:07:25 09:51:02-04:00, 2011:07:25 09:51:21-04:00, 2011:07:25 09:51:54-04:00, 2011:07:25 09:52:32-04:00, 2011:07:25 09:52:57-04:00, 2011:07:25 09:53:29-04:00, 2011:07:25 09:53:58-04:00, 2011:07:25 09:55:16-04:00, 2011:07:25 09:56:57-04:00, 2011:10:10 10:09:54-04:00, 2011:10:12 10:48:22-04:00, 2011:10:12 10:51:44-04:00, 2011:10:12 10:52:45-04:00, 2011:10:12 10:56:07-04:00, 2011:10:12 11:02:32-04:00, 2011:10:12 11:08:37-04:00, 2011:10:12 11:21:47-04:00, 2012:02:28 08:34:12-05:00, 2013:01:31 10:18:04-05:00, 2013:03:04 10:25:53-05:00, 2013:03:04 10:26:35-05:00, 2013:03:04 10:27:37-05:00, 2013:03:04 11:14:47-05:00, 2013:04:12 10:50:21-04:00, 2013:04:12 10:53:49-04:00, 2013:07:11 10:50:19-04:00, 2013:07:11 10:50:55-04:00, 2013:07:15 11:18:56-04:00, 2013:07:30 09:23:04-04:00, 2014:01:09 11:54:56-05:00, 2014:01:13 09:03:40-05:00, 2014:01:13 09:10:01-05:00, 2014:01:13 09:16:36-05:00, 2014:01:14 11:02:12-05:00, 2014:01:14 11:46:56-05:00, 2014:01:15 08:09:09-05:00, 2014:05:29 10:05:01-04:00, 2014:07:25 10:32:24-04:00, 2014:09:02 11:33:20-04:00, 2014:09:02 11:33:20-04:00, 2014:09:02 11:35:34-04:00, 2014:09:02 11:40:34-04:00, 2014:09:02 11:45:16-04:00, 2014:09:02 11:46:42-04:00, 2014:09:02 11:58:42-04:00, 2014:09:03 10:21:39-04:00, 2014:09:03 10:21:49-04:00, 2014:09:03 10:24:29-04:00, 2014:09:03 10:27:07-04:00, 2014:09:03 10:29:14-04:00, 2014:09:03 10:34:32-04:00, 2014:09:03 10:37:06-04:00, 2014:09:03 10:38:24-04:00, 2014:09:03 10:58:36-04:00, 2014:09:03 11:00:05-04:00, 2014:09:03 11:00:35-04:00, 2014:09:03 11:05:51-04:00, 2014:09:03 11:23:25-04:00, 2014:09:03 11:29:48-04:00, 2014:09:03 11:32:46-04:00, 2014:09:03 11:50:21-04:00, 2014:09:04 08:44:30-04:00, 2014:11:06 09:28:34-05:00, 2015:02:11 15:14:07-05:00, 2015:10:27 09:49:11-04:00, 2015:10:27 09:50:14-04:00, 2016:02:10 07:49:25-05:00, 2016:02:10 07:51:31-05:00, 2016:02:10 07:51:58-05:00, 2016:02:10 08:16:09-05:00, 2016:02:10 08:19:41-05:00, 2016:02:10 11:14:17-05:00, 2016:02:10 11:29:02-05:00, 2016:02:10 11:31:03-05:00, 2016:02:10 11:40:28-05:00, 2016:02:10 11:42:13-05:00, 2016:02:11 08:57:45-05:00, 2016:02:11 11:15:52-05:00, 2016:02:12 10:21:20-05:00, 2016:02:23 11:49:33-05:00, 2016:09:21 09:57-04:00, 2016:12:02 09:05-05:00
History Software Agent          : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Derived From Instance ID        : xmp.iid:05747C9CC72468118A6DB63413D72EF3
Derived From Document ID        : xmp.did:21F9AAD0132068118083BDAE6BF072A7
Derived From Original Document ID: xmp.did:21F9AAD0132068118083BDAE6BF072A7
Derived From Rendition Class    : default
Doc Change Count                : 671
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Count                      : 8
Creator                         : Adobe InDesign CS5 (7.0.4)

EXIF Metadata provided by EXIF.tools