SUNGALE ELECTRONICS 12A01501 GATEWAY-SIREN User Manual HUB ALARM User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3967726
Application ID	mucku+jIpKWIqbW+D9+4JQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	32kB (400034 bits)
Date Submitted	2018-08-18 00:00:00
Date Available	2018-08-18 00:00:00
Creation Date	2018-08-10 10:07:25
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2018-08-10 18:02:55
Document Title	Microsoft Word - HUB-ALARM?User?Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

Prod
duct image
“e” button :
lo
ong press for reset
Wifi connection use
Back light LED:
1. Indicator for wifi connectio
on
2.Night light
function
Installation
HUB‐ALA
RM
Usser Manu
ual
Model#
SH12A0
01
Than
nk you for purchasing the eco4life Smaart
Siren
n with Hub. We
W are excited in being a part
of making
your life easier, safeer and bringin
ng
peacce of mind intto your homees.
Plugg your hub in
nto a wall outtlet centrally
locaated in your home
or officce
A re
ed light shoulld illuminate, indicating th
he
hub
b is powered on and readyy.
Dow
wnload the free eco4life App fro
om the Google Play
or Apple App store onto
your smartt phone
Remote Access
When
n used with eco4life
and eco4life power, Hub
allow
ws you to con
ntrol & applica
ances from virttually
Step
p 2.
anyw
where on your ph
hone
outle
et
Night light
Step
p 3.
Built in night light
pair to your smart phone,
until the back light flashiing.
Plug in the
e Super siren in
nto an existing power
Press the “e” button and hold on 5 secon
nds to
per siren is stand
dby to connect the
It is means the Sup
Wind
dow/Door sens
sor alarms
wifi network.
When
n the sensor is trigged, it signa
als alarm to ring
g and
ce the smartphone and hub are paired, the hub
b will
Onc
the camera to record
d activity
startt searching nearby routers. Entter your Wi-Fi
pass
sword is accepted, the indicato
or light will becom
me
stea
ady for 3 second
ds before going off.
Step 4.
WI-FI/Bluetooth Bridge
show as bellow:
Converts BLE to WIFI and WIFI to BLE
Open the app,
and registration your account
( It means the Super Siren connected your smartphone
via Bluetooth. )
a.
Connect the Super siren to your smart
phone by Bluetooth, Touch “+” in the top right
corner of your phone and select “scanning nearby
d.
equipment…”
Input your home wifi password to connect the hub
WIFI connection
to your wifi router,
e.
b.
app will guide to this step
Connection successful will show as bellow:
Once the app scanned the Super siren
device ,
will show as bellow:
Congratulations, you connect your super siren
connected successful.
c.
Press “confirm” to add the device, app will
Then you can according to you
desire to add the window sensor, motion sensors… to
set your home security. Or set your smart home scene.
Package Contents
(according to bellow app guide to do the setting)
1x
Siren gateway
1x
User Manual
1x
Warranty Card
Troubleshooting
Indicator State:
light keep on:
night light mode
light Flashing: ready for the connection
light off:
No power
Q: I am having trouble getting my smartphone
to connect my smart Siren with hub
A: Different phones may behave differently
when connecting to eco4life smart siren with
hub. When experiencing diffculties, try the
following steps;
1、Turn Wi‐Fi & BLE off, then turn them back
on, Try to connect again.
remark:
2、Close the Eco4life App & restart the App ‐
try to connect.
Put the others eco4life hardware in the area of the
3、Uninstall the App & download it again
super siren covering range.
10 meters is the good range for Bluetooth hardware
Specification
For more troubleshooting help, please visit
www.sonicgracehome.com FAQ or send us an
email at cs@sonicgracehome.com
Bluetooth:4.0 Version
APP Support:IOS/Android
Working Temperature: -20°C ~ 60°C
Night light
Perfect for
Frequent travelers
Set or change your timers from the road
Pet Owners
Staying late at works
Turn your lights on your pets anytime, from anywhere.
Energy Saving
Never leave your lights on again
NOTE:
Put all your smart home devices in the signal coverage
area .
It will take the devices response more
sensitivity.
FCC Statement:
This device complies with Part 15 of the FCC
rules. Operation is subject to the following
two conditions: 1) this device may not cause
harmful interference, and 2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct
the interference by one or more of the
following measures:
‐‐Reorient or relocate the receiving antenna.
‐‐Increase the separation between the
equipment and receiver.
‐‐Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
‐‐Consult the dealer or an experienced
radio/TV technician for help.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation
exposure limits set forth for an uncontrolled
environment. This transmitter must not be
co‐located or operating in conjunction with
any other antenna or transmitter.
The distance between user and products should
be no less than 20cm.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Administrator
Create Date                     : 2018:08:10 10:07:25+08:00
Modify Date                     : 2018:08:10 18:02:55+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:08:10 18:02:55+08:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - HUB-ALARM?User?Manual
Creator                         : Administrator
Document ID                     : uuid:0c41f1b9-92fc-481c-8372-a8bfcdc92933
Instance ID                     : uuid:6efc8cc4-4975-4a97-88f1-5b1b0d22e968
Page Count                      : 4

EXIF Metadata provided by EXIF.tools