SUNGALE ELECTRONICS C10011008 IP CAMERA User Manual IP CAMERA

Download:
Mirror Download [FCC.gov]
Document ID	3967739
Application ID	TwWs+X8A+OMmE9kpcT0Oiw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	30.27kB (378417 bits)
Date Submitted	2018-08-18 00:00:00
Date Available	2018-08-18 00:00:00
Creation Date	2018-08-14 11:16:28
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2018-08-14 11:16:28
Document Title	Microsoft Word - IP?CAMERA
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

IP CAMERA
USER MANUAL
Model# SC‐BIPC‐1001
For ongoing product improvement, this manual is subject to modification without prior notice
Thank you for purchasing the eco4life IP camera. We are excited in being
a part of making your life easier, safer and bringing peace of mind into
your homes.
What in the box?
1x Camera
6x Battery
1x Warranty
1x User manual
2x Screws
2xPlastic housing
Product overview
1. Speaker
2. Microphone
3. Indicator Light
Solid Red light on: the camera network is abnormal
Slowly Blinking red light: awaiting WiFi connection
（Hold on the reset button for 5seconds to set the red light to Slowly blink）
Solid blue light on：camera running correctly
Blinking blue light: Currently Connecting
4. Light sensor
5. Motion sensor
6. Micro USB port
Connect the camera to the computer, to copy the video from camera to computer.
7. Turn the upper half part of the camera clockwise and pull it up to open the camera to put the
battery
8. Camera base
Hang it on the wall by the screws
9. SD slot ( SD slot is inner the camera)
10. Reset button
Set‐up
1. Install 6pcs AA battery into the camera.
2. Download our eco4life app by scanning QR code below or searching from you app store.
Follow our prompts to finish setup.
Important reminders before adding the device:
1. This camera only supports 2.4GHZ WiFi router, please make sure you are using a 2.4GHZ
WiFi router.
2. Please follow the instructions and make sure the password is entered correctly.
3. Only one camera and one registered account is allowed by the app. if a Registered
account added the camera through the APP, another User can not longer add and
register an account.
4. You must delete the first Registered Account from the App, then another User may add
the device and register an account.
How to add the device:
Step 1: Open the eco4life App, click”+”, Select” All devices” then select ”other devices”
Select ”other devices”, and click” AP mode”
Make sure the indicator light is slowly blinking, and click “ Confirm indicator slowly blink”
Select the WiFi router and input the WIFi password, and click the “ Confirm”
Click” Connect Now”, and select the Wlan”SmartLfe‐93fb to connect.
Press the back arrow of the top left corner. Will begin the configuration of the mobile and the
camera,
FCC Statement:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: 1) this device may not cause harmful interference, and 2) this device must accept
any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
‐‐Reorient or relocate the receiving antenna.
‐‐Increase the separation between the equipment and receiver.
‐‐Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
‐‐Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co‐located or operating in conjunction with any
other antenna or transmitter.
This device must operate with a minimum distance of20 cm between the radiator and user
body.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2018:08:14 11:16:28+08:00
Modify Date                     : 2018:08:14 11:16:28+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - IP?CAMERA
Creator                         : Administrator
Document ID                     : uuid:6635ee25-4929-4631-b43c-269162f90810
Instance ID                     : uuid:f08425f9-9052-4b3e-8a0c-997e6bff9682
Page Count                      : 6

EXIF Metadata provided by EXIF.tools