SUNVALLEYTEK TT-DL050 LED DESK LAMP User Manual TT DL050 20181018 V1 1

SUNVALLEYTEK INTERNATIONAL, INC. LED DESK LAMP TT DL050 20181018 V1 1

User Manual

www.taotronics.comTAOTRONICS LED DESK LAMPUser GuideProduct Diagram35 621Desk Lamp4①Lamp Head②Night Light③LampArm④Tension Adjuster⑤Power Port⑥5V/2A iSmart USB port⑦Touch Panel⑧Wireless Charging Pad87Touch Panel①Brightness Setting②On / Off③Color Temperature –④ColorTemperature +⑤Favorite⑥Timer⑦Night LightPackage Contents•1 x TaoTronics LED Desk Lamp (Model:TT-DL050)•1 x Power Adapter•1 x Cleaning Cloth•1 x User GuideSpecificationsHow to Use1.On / OffThe On / Off LED indicator will light up when the lamp is connected withpower.Tap the button to turn on the lamp and the touch panel.Tapagain to turn off.The TT-DL050 Desk Lamp includes a brightness and colortemperature memory function; it will directly activate the previous settingseach time it’s turned on.2.Brightness AdjustmentToadjust the brightness, tapor slide across the Brightness Setting icons fromthe left (least bright) to the right (most bright).3.Color Temperature AdjustmentPress theorbutton to go through the 5 levels of color temperature.The indicator will flash 3 times when it reaches the highest or the lowestsetting.4.Timer FunctionWhen the lamp is on, tap the button and the indicator will slowly flashes3 times to start timing.The lamp will automatically turn off in 60 minutes.Tapagain in timer mode to cancel the timer setting.The LED indicator will flashonce.5.Favorite FunctionWhen the lamp is on, tap and hold the button for 2 seconds.Theindicator will flash 3 times and the current color temperature and brightnesswill be set as your favorite.Each time the lamp is turned on, tap on thebutton once to activate your favorite setting.Tap and hold again for 2seconds to erase and set a new favorite.6.Night Light FunctionWhen the lamp is on, tap the button until the indicator slowly flashes 3times to light up the night light.Tap either the button or the buttonto turn off the night light. In Night Light mode, tap the button to set orcancel the 60 minute timer.Note: The night light and main lamp will not light up at the same time.7.Wireless CharingPlace your phone with wireless charging functionality onto the charging pad,charging will startautomatically.Note:If charging does not occur, adjust the phone so its receiver can be detected.Please note that different model phones have their receivers in differentpositions.ModelTT-DL050Input12V / 3AUSB OutputDC 5V / 2ALED Power12W MaxWireless ChargingOutput7.5W for iphone Max / 10W forSamsung MaxColor Temperature2700-3000K, 3000-3500K, 4000-4500K,5000-5500K,6000-6500KCRI>80
TT-DL050www.taotronics.comNORTH AMERICAE-mail : support@taotronics.com(US)support.ca@taotronics.com(CA)Tel : 1-888-456-8468 (Monday-Friday: 9:00 – 17:00 PST)Address: 46724 Lakeview Blvd, Fremont, CA 94538EUROPEE-mail:support.uk@taotronics.com(UK)support.de@taotronics.com(DE)support.fr@taotronics.com(FR)support.es@taotronics.com(ES)support.it@taotronics.com(IT)EU Importer: ZBT International Trading GmbH, Halstenbeker Weg98C,25462 Rellingen,DeutschlandASIA PACIFICE-mail : support.jp@taotronics.com(JP)JP Importer:株式会社SUNVALLEY JAPANTe：l03-5542-0238（10～18時/土日祝除く）〒104-0032東京都中央区八丁堀３丁目１８－６ PMO京橋東９FMANUFACTURERShenzhen NearbyExpress Technology Development Co., Ltd.Address:333 Bulong Road,Shenzhen,China,518129MADE IN CHINAStructural PartsThe lamp head is 90 degrees rotatable to the left / right.The lower lamp arm is 90 degrees rotatable to the left / right on the base.The lower lamp arm is 90 degrees forward and 54 degreesbackward rotatable.The upper lamp arm is 90 degrees forward rotatable.Caution•Use only the supplied AC power adapter.•Please do not dismantle the product by yourself, always ask professionalelectricians or authorized technicians for repair.•If you smell bad odor or anything unusual, please turn off the unitimmediately.•Please do not remove the power plug with wet hands as it may causeelectrical shock.•Keep away from children.•Do not put this unit near extreme heat sources, moisture,or corrosive substances.•Regularly clean thelamp.•Please store in a dry and cool place if not using for a long period of time.Troubleshooting GuideWarrantyTaoTronicsproducts are covered by a 12 month limited warranty from thedate of its original purchase. If any problems occur, please contact oursupport team.We can only provide after sales service for products that are sold byTaoTronicsor TaoTronics authorized retailers and distributors.If you havepurchased your unit from a different place, please contact your seller forreturn and warrantyissues.ProblemPossible CauseSolutionThe lamp doesnot light upNo power supplyCorrectly plug in thepower adapterThe lamp is not turned onRefer to the How toUse sectionThe touchpanel is notresponsiveHands are wetTouch the panel withdry handsVoltage fluctuation causingpanel failureDisconnect power torestart the lampLED failureLED component failedPlease contact theTaoTronics Support TeamBad smellPower adapter failedPlease contact theTaoTronics Support TeamShort circuitPlease contact theTaoTronics Support Team
FCC STATEMENT:This device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, includinginterference that may cause undesired operation.Warning: Changes or modifications not expressly approved by theparty responsible for compliance could void the user's authority tooperate the equipment.NOTE: This equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. Thisequipment generates uses and can radiate radio frequency energyand, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, thereis no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radioor television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forthfor an uncontrolled environment.

Navigation menu