SUNVALLEYTEK TT-DL050 LED DESK LAMP User Manual TT DL050 20181018 V1 1

SUNVALLEYTEK INTERNATIONAL, INC. LED DESK LAMP TT DL050 20181018 V1 1

User Manual

www.taotronics.com
TAOTRONICS LED DESK LAMP
User Guide
Product Diagram
3
5 6
2
1
Desk Lamp
4
①Lamp Head
②Night Light
③LampArm
④Tension Adjuster
⑤Power Port
⑥5V/2A iSmart USB port
⑦Touch Panel
⑧Wireless Charging Pad
8
7
Touch Panel
①Brightness Setting
②On / Off
③Color Temperature –
④ColorTemperature +
⑤Favorite
⑥Timer
⑦Night Light
Package Contents
•
1 x TaoTronics LED Desk Lamp (Model:TT-DL050)
•
1 x Power Adapter
•
1 x Cleaning Cloth
•
1 x User Guide
Specifications
How to Use
1.
On / Off
The On / Off LED indicator will light up when the lamp is connected with
power.Tap the button to turn on the lamp and the touch panel.Tap
again to turn off.The TT-DL050 Desk Lamp includes a brightness and color
temperature memory function; it will directly activate the previous settings
each time it’s turned on.
2.
Brightness Adjustment
Toadjust the brightness, tapor slide across the Brightness Setting icons from
the left (least bright) to the right (most bright).
3.
Color Temperature Adjustment
Press the
or
button to go through the 5 levels of color temperature.
The indicator will flash 3 times when it reaches the highest or the lowest
setting.
4.
Timer Function
When the lamp is on, tap the button and the indicator will slowly flashes
3 times to start timing.The lamp will automatically turn off in 60 minutes.Tap
again in timer mode to cancel the timer setting.The LED indicator will flash
once.
5.
Favorite Function
When the lamp is on, tap and hold the button for 2 seconds.The
indicator will flash 3 times and the current color temperature and brightness
will be set as your favorite.Each time the lamp is turned on, tap on the
button once to activate your favorite setting.Tap and hold again for 2
seconds to erase and set a new favorite.
6.
Night Light Function
When the lamp is on, tap the button until the indicator slowly flashes 3
times to light up the night light.Tap either the button or the button
to turn off the night light. In Night Light mode, tap the button to set or
cancel the 60 minute timer.
Note: The night light and main lamp will not light up at the same time.
7.
Wireless Charing
Place your phone with wireless charging functionality onto the charging pad,
charging will startautomatically.
Note:
If charging does not occur, adjust the phone so its receiver can be detected.
Please note that different model phones have their receivers in different
positions.
Model
TT-DL050
Input
12V / 3A
USB Output
DC 5V / 2A
LED Power
12W Max
Wireless Charging
Output
7.5W for iphone Max / 10W for
Samsung Max
Color Temperature
2700-3000K, 3000-3500K, 4000-4500K,
5000-5500K,6000-6500K
CRI
>80
Structural Parts
The lamp head is 90 degrees rotatable to the left / right.
The lower lamp arm is 90 degrees rotatable to the left / right on the base.
The lower lamp arm is 90 degrees forward and 54 degrees
backward rotatable.
The upper lamp arm is 90 degrees forward rotatable.
Caution
•
Use only the supplied AC power adapter.
•
Please do not dismantle the product by yourself, always ask professional
electricians or authorized technicians for repair.
•
If you smell bad odor or anything unusual, please turn off the unit
immediately.
•
Please do not remove the power plug with wet hands as it may cause
electrical shock.
•
Keep away from children.
•
Do not put this unit near extreme heat sources, moisture,
or corrosive substances.
•
Regularly clean thelamp.
•
Please store in a dry and cool place if not using for a long period of time.
Troubleshooting Guide
Warranty
TaoTronicsproducts are covered by a 12 month limited warranty from the
date of its original purchase. If any problems occur, please contact our
support team.
We can only provide after sales service for products that are sold by
TaoTronicsor TaoTronics authorized retailers and distributors.If you have
purchased your unit from a different place, please contact your seller for
return and warrantyissues.
Problem
Possible Cause
Solution
The lamp does
not light up
No power supply
Correctly plug in the
power adapter
The lamp is not turned on
Refer to the How to
Use section
The touch
panel is not
responsive
Hands are wet
Touch the panel with
dry hands
Voltage fluctuation causing
panel failure
Disconnect power to
restart the lamp
LED failure
LED component failed
Please contact the
TaoTronics Support Team
Bad smell
Power adapter failed
Please contact the
TaoTronics Support Team
Short circuit
Please contact the
TaoTronics Support Team
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment.

Navigation menu