SYLVANIA TV/VCR Or DVD Combo Manual L0605428

User Manual: SYLVANIA SYLVANIA TV/VCR or DVD Combo Manual SYLVANIA TV/VCR or DVD Combo Owner's Manual, SYLVANIA TV/VCR or DVD Combo installation guides

Open the PDF directly: View PDF .
Page Count: 32

Download
Open PDF In Browser	View PDF

_lFm--th.

'TVNCR

13W
;2419

13" MODEL

inch)

ILLUSTRATED

INSTRUCCIONES

EN ESPAIWOL INCLUIDA

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A
RISK OF ELECTRIC SHOCK IS PRESENT
WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE
APPLIANCE.

CA[ TION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE (;OVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The caution marking is located on the rear of the cabinet.

IMPORTANT

SAFEGUARDS

1.Read instructions-All the safety and operating instructions
should be read before the appliance is operated.

.&ME[ BLES- Cet appareil ne dolt _tre
LESCO_POS_NTES
placd que sur un meuble (avec ou sans
..........................
roulettes) recommandd par le fabricant.
Si vous l'installez sur un meuble
roulettes, d@lacez les deux ensembles
avec pr&aution. Un arr_t brusque, l'utilisation d'une *brce excessive et des surfaces irrdgulibres
risquent de ddstabiliser l'ensemble et de le renverser.
S MBOLEDA'ERTISSEMEN

2.Retain Instructions-The safety and operating instructions
should be retained *br future reference.
&Heed '_ilrnings-All warnings on the appliance and in the
operating instructions should be adhered to.
4.Follow Instructions-All
should be followed.

operating and use instructions

POUR

5.C|eaning-Unplug TVVCR from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth tbr cleaning.
EXCEPTION: A product that is meam for uninterrupted
service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the uses"for cleaning or aW other purpose, may exclude the reference m
unplugging the appliance in the cleaning description otherwise required in item 5.

9. Ventilation-Slots and openings in the cabinet and the back
or bottom are prox ided *br xentilation and to ensure reliable
operation of the TVV(R and to protect it from overheating, and these openings must not be blocked or covered.
The openings should never be blocked by placing the
TV/VCR on a bed, solh, rug, or other similar surface. This
TV'VCR should hexer be placed near or over a radiator or
heat register. This TV,'VCR should not be placed in a builtin installation such as a bookcase or rack unless proper
ventilation is provided or the manu*hcturer's instructions
have been adhered to.

&Attachments-Do not use attachments not reconnnended by
the TVVCR manufucturer as they may cause hazards.
7._'_lter and Moisture-Do not use this TVVCR near watert\_rexample, near a bath tub, wash bowl, idtchen sil_k, or
laundry rob, in a wet basement, or near a swinnning pool,
and the like.

10.Power Sources-This TVVCR should be operated only
from the type of pmxer source indicated on the marking
label. If you are not sure of the type of power supply to
your home, consult your appliance dealer or local pmxer
company. For TV VCRs intended to operate from battery
power, or other sources, re*er to the operating instructions.

8.Accessories-Do not place this TVVCR on an unstable cart,
stand, tripod, bracket, or table. The TVVCR may fall, causing serious injuW to someone, and serious damage to the
appliance. Use only with a cart, stand, tripod, bracket, or
table reeonnnended by the manutacrurer, or sold with the
TViVCR. Any mounting of the
PORTABLE
CART WARNING
applianceshould _llow the manufacturer's instructions and should
__
use a mounting accessor 7 reconlmended by the manuiacturer. An
appliance and cart combination
should be mined with care.
Quick stops, excessix e force, and
uneven surfuces may cause the
appliance and cart combination to

ll.Gronnding or Polarization-This TVVCR is equipped
with a polarized alternating-current line plug(a plug having
one blade wider than the other). This plug xxill fit into the
power outlet only one xxay.This is a safety feature. If you
are unable to insert the plug fully into the outlet, tW reversing the plug. If the plug should still full to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
12.Power-Cord Protection-Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles,
and the point where they exit fi'om the appliance.

overturn.

-2-

EN
9103

FIGURE
EXAMPLE

OF ANTENNA

NATIONAL

A
GROUNDING

ELECTRICAL

AS PER

CODE
LEAD

W_RE

DISCHARGE

UNIT

(NEC SECTION

8/0

20)

ELECTRIC
SERVICE
GROUNDING
(NLC

NEC

NATIONAL

ELECTRICAL

ELECTRODE

Antenna

(NEC ART 250

grounding-If

an outside antenna

2/)

SYSTEM
PART H)

a. When the power-supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have *hllen into the
TV VCR.

proper grounding of the mast and supporting structure,
grounding of the lead-in wire m an antenna discharge unit,
size of grounding conductors, location of antenna-discharge
unit, co:mection to grounding electrodes, and requirements
ior the grounding electrode. (Fig. A)

c. If the TVVCR has been exposed to rain or water.
d. If the TVVCR does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions, as improper adjustment of other controls may result in damage and will often
require extensive work by a qualified techuician to restore
the TV VCR to its normal operation.

14.Lightning-For
added protection J:br this TVVCR receiver
during a lighming storm, or when it is lefi unattended and
unused for long periods of time, unplug it ii'om the wall
outlet and disco:mect the antenna or cable system. This will
prevent damage to the TViVCR due to lightning and
power-line surges.
Lines-An

8/0

19.Damage Requiring Service-Unplug this TViVCR fi'om
the wall outlet and reid" servicing to qualified service pet'sonnel under the following conditions:

cable system is connected to the TV VCR, be sure the
antenna or cable system is grounded so as to provide some
protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code,
ANSI NFPA No. 70, provides inforxnation with respect to

15.Power

CONDUCTORS

CODE

$2898A

13.Outdoor

SECTION

e. If the TViVCR has been &opped or damaged in any way.
£ When the TViVCR exhibits a distinct change in performance-this indicates a need for service.

outside antenna system should not be

20.Replacement Parts-When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock, injury to persons or other hazards.

located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can ball into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them
might be _htal.

21.Safety Check-Upon completion of any service or repairs to
this TV VCR, ask the service teclmician to per*_rm routine
safety checks to determine that the TVVCR is in proper
operating condition.

16.Overloading-Do
not overload wall omlets and extension
cords as this can result in a risk of fire or electric shock.
17.Object and Liquid Entry-Never
push objects of any kind
into this TV VCR tln'ough openings as they may touch dangerous voltage points or short out parts that could result in
a fire or electric shock. Never spill liquid of any kind on
the TV'VCR.

22.Heat-This TVVCR product should be situated away fi'om
heat soumes such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.

18.Servicing-Do
not attempt to service this TVVCR yourself
as opening or removing covers may expose you to dangerous voltage or other hazards. ReIer all servicing to qualified service personnel.

CAUTION: TO PREVENT
INSERT.

ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

ATTENTION: POUR r3VITER LES CHOC r3LECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE
LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND.

-3-

EN
9103

PRECAUTIONS
IMPORTANT COPYRIGHT

INFORMATION

Unauthorized recording or use of broadcast television programming, video tape, film or other copyrighted material may violate applicable copyright
laws. We assume no responsibility for the unauthorized duplication, use, or other acts which int}inge
upon the rights of copyright owners.

For safe operation and satisfactory performance of
your TV/VCR, keep the following in mind when
selecting a place for its installation:
* Shield it t}om direct sunlight and keep it away
t}om sources of intense heat.
* Avoid dusty or humid places.
* Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes
at the top and bottom of the unit. Do not place the
unit on a carpet because this will block the ventilation holes.
* Install unit in a horizontal position.
* Avoid locations subject to strong vibration.
* Do not place the TV/VCR ne_ strong nx_gnetic fields.
* Avoid moving TV/VCR to locations where temperature differences are extreme.

FCC WARNINGThis equipment
may generate or use radio fi'equency
energy. Changes or
modifications
to this equipment
may cause
harmful
interference
unless the modifications
are expressly approved in the instruction manual. The user could lose the authori D to operate this equipment if an unauthorized
change
or modification
is made.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate
radio t}equency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio colmnunications.

* Do not handle the power cord with wet hands.
* Do not pull on the power cord when disconnecting
it from an AC wall outlet. Grasp it by the plug.
* II; by accident, water is spilled on your unit, unplug
the power cord immediately and take the unit to ,an
Authorized Service Center %r servicing.
* Do not put your fingers or objects into the
TV/VCR cassette holder.

However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment
and receiver.
3) Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.

* Do not place anything directly on top of the unit.

Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place,
or after heating a cold room or under conditions of
high humidity. If a tape is played in a TV/VCR
which has moisture, it may damage the tape and
TV/VCR. Therefore if condensation occurs inside the
unit, turn the POWER button on and allow at least 2
hours for the unit to dry out.

4) Consult the dealer or an experienced radJo/TV
technician %r help.

The serial number of this product may be %und on the back of the unit. No other TV/VCR has the same serial
number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers arc not kept on file.
Date of Purchase
Dealer name
Dealer Address
Dealer Phone No.
Model No.
Serial No.
-4-

EN
9103

[] IMPORTANT

SAFEGUARDS

[] PRECAUTIONS

.............

. .......................

_ '

[] PLAYBACK

...........................

NORMAL PLAYBACK

..................

AUTO REPEAT PLAYBACK
[] FEATURES
[] SUPPLIED
[] OPERATING

............................
A(_TSSORIES

6
...............

CONTROLS AND FUNCTIONS

[] PREPARATION"

FOR USE ................

ANTENNA/CABLE
FRONT A/V INPUT

.......

....................

[] SET UP FOR USE

...........

CLOCK SET UP (AUTO / MANUAL)
DAYLIGHT-SAVING TIME ..............
CHANNEL SET UP

......

....................
.....

......................

WATCHING A TV PROGRAM

VERTICAL HOLD CONTROL

............

10
12

V-CHIP SET UP ........................
FM MODE (13 inch model only) ...........

.........................

21
21

TIMER PROGRAM EXTENSION

WAKE UP TIMER ......................

SLEEP TIMER .........................

[] COPYING A VIDEO TAPE ...............

[] ON"SCREEN DL_PLAY

[] SPECIAL FEATURES

MODO

DE ENTRADA

EXTERNA

25
25

AUTO REWIND-EJECT

.................

.......................
GUIDE

25
...........

[] SPE (_IFICATIONS

.....................

[] CABLE

DESIGNATIONS

CHANNEL

SELECCION
28

...........

..................

REAL TIME TAPE COLEN-TER ............

........

.................

[] WARRANTY

DE ANTENA/CABLE

.........

.......................

[] TROUBLESHOOTING

CONEXIONES

OTR (One Touch Recording) ..............
TIMER RECORDING ...................

[] MAINTENANCE

CONTROLES
DE OPERACH)N
SUS FUNgJONES
........................

.................

............

AUTO RETURN

CLOSED CAPTION SYSTEM

..............

DEGAUSS ING

...................

.......................

HINTS FOR AUTOMATIC TIMER
RECORDING
.........................

PICTURE CONTROL

............

TRACKING ADJUSTMENT
[] RECORDING

GAME MODE .........................
........................

STILL PICTURE

.......................

NORMAL RECORDING

DELETING (OR ADDING) CHANNEL
[] TV OPERATION".

SELECTING THE LANGUAGE

RENTAL PLAYBACK ...................

.....................

SLOW MOTION

INSTALLING THE BATTERIES ...........

.............

.............................

CONNECTIONS

...................

DE IDIOMA

AJUSTE

DE CANAL

AJUSTE

DEL RELOJ

27
......
Back

.................

......................
.....................

27
Cover

30
31
31

A NOTE ABOUT RECYCLING
This product's packaging materials arc recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.
-5-

EN
9103

* Rotary 4-head Record/Playback
System-Four
heads ensure excellent picture quality and special
effects playback.
* Index Search-Fast-forwards
to start of next recording.
* Slow Motion-View
recorded program at slower
than normal speed.
* Infrared remote control

* Auto Head

* Trilingual on screen menu display selectable in
English, Spanish, or French
" Real time counter-This
shows the elapsed recording or playback time in hours, minutes, and seconds. The .... indication will appear when the tape
is rewound further than the tape counter position
"0:00:00".

*
*

*
*
*

* 181 channel capability PLL frequency synthesizer tuner with direct station call-(A converter may
be necessary to view scrambled cable channels.)
* Auto Clock Setting-Allows
you to set the clock
*:rom a PBS broadcast station.

* Closed caption system-You
may view specially
labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or
text display added to the program.
* Game mode-Automatically
selects *:font A/V input
mode and allows the TV/VCR display to be suitable for use with TV games.
* Auto power on and off system-Automatically
turns on the TV/VCR when you insert the cassette,
rams off after auto-rewind,
and ejects when the
beginning of the tape is reached.
* Auto rewind when the end of a tape is
reached-This
function doesn't occur when using
timer recording.
* 2 Step picture search operation-You
can view a
video program at a high speed or super high speed
in either a folavard or reverse direction in LP and
SLP mode. For SP mode only high speed.
* Three different playback tape speeds : SP/LP/SLP
* Two different recording tape speeds : SP/SLP

Remote Control Unit

Cleaner-Automatically

cleans video

heads as you insert or remove a cassette.
Zero Return-The tape returns to counter of
0:00:00 by rewinding or t:astt\_rwarding.
Still-"Freeze" the picture at any time, t\_rclose
viewing of a particular scene. Only tapes recorded
in SLP mode wil! show a t;airlyclear picture.
Digital Auto Tracking (DTR)-Automatically
adjusts the tracking t\_reach tape you play.
Rental play mode-Improves playback picture
quality t:romworn tapes, such as rental tapes.
Auto repeat-Allows you to repeat the playing of a
tape indefinitely without pressing the PLAY button.
Time search-Lets you set the TV/VCR to advance
the tape by entering the desired playback time you
want to skip.
OTR (One Touch Recording)-][nstant recording in
30 to 480 minutes increments is possible at the
push of the REC/OTR button.
1 Year, 8 events (including Daily and Weekly
Timer Recording)-The built-in timer allows you to
record up to 8 pro_ams at different times on different channels up to 1 year in advance. The Daily
timer allows recordings to be made of daily broadcasts, and the Weekly timer allows recording to be
made once a week up to the end of the tape.
Auto return-After timer recording is finished, the
TV/VCR can return to the beginning of the recording.
Wake-uplSleep timer-Allows you to have the
TV/VCR automatically turn on or off at a desired
time.

* Timer Program Extension-Allow you to shift the
time schedule t\_r automatic timer recording.
* V-CHiP-Enables parents to prevent their children
t:rom watching inappropriate material on TV.
* FM mode-Allows you to listen to the FM radio.
(13 inch model/SRC2213 W only)

2 AA Batteries

Rod Antenna
(1.

model only supphed)

PART NO.
(NE 109UD l\_r SRC2213 W)
(NE138UD for SRC2419)

PART NO. (0EMN00673 or
0EMN01599 or 0EMN01755)

* If you need to replace these accessories, please refer to the PART NO. under the illustrations and call 1-800968-3429.
* Depending on your antenna system, you may need different types of Combiners (Mixer) or Separators
(Splitter). Contact your local electronics store for these items.
* We do not recommend the use of universal remote controls. Not all of the functions may be controlled with
a universal remote control. If you decide to use a universal remote control with this unit, please be aware
that the code number given may not operate this unit. In this case, please call the manuti_cturer of the universal remote control.
-6-

EN
9103

©//,RATING

(.()N'I

R©LS

I) FUN(.

This manual covers 13" and 19". The operation of the two models
the appearance,
13" model is illustrated in this manual,

[/©MS

are exactly the same

except

NOTE:
* We do not recommend the use of universal remote controls. Not all of the ffmctions may be controlled with
a universal remote control.
If you decide to use a universal remote control with this unit, please be aware that the code number given
may not operate this unit. In this case, please call the manufi_cturer of the universal remote control.
-TV/VCR

FRONT PANEL -

6 7 891011

12 1314

- REMOTE CONTROL [SRC2213W]

<
3 .........

....
(-)
RETUR_

2 AUDIO input jack- Connect to the audio output
jack of your video camera, video game or another
VCR.
3 POWER button- Press to turn TV/VCR on and off.
Press to activate timer recording.
4 VOLUME A / V buttons- Adjust the volulne level.
CHANNEL A / Y buttons- Press to select the
desired channels t%r viewing or recording, listening
of FM radio. (13 inch model only)
You may display the main menu on the TV screen
by pressing repeatedly this button on the TV/VCR
until you go below the lowest lnelncrized channel.
TRACKING function- Press to minimize video
'noise' (lines or dots on screen) during playback or
Slow mode. (See page 20.)
6 Remote Sensor Window- Receives the infi:ared
signals from the remote control.
7 STOP / EJECT button (TV/VCR)- Press to stop the
tape motion. Press in the Stop mode to remove tape
from TV/VCR.

.........
24

(Tb (Tg (->_
15

1 VIDEO input jack- Connect to the video output
jack of your video camera, video game or another
VCR.

.........
..........
5

GD
LT3 G)
Cg2 GD
Lvg __j

---4

16--

17°4

9
.........
10

8-7 .........
R£CORD

11
18
1920,,,,,

• S_SO P_E,STILt

(-3

_22

¢30,,-

21
...................... E
..........................

[SRC2419]

25
26

3 ..........

CO 0-3 Cz3 _2_
15 ..........

24
5

-4
16,--

STOP button (remote control)tape motion.
'_" button-

......23
.......
9
..........
10

17 .....
7 .........
_EOORa

• S_EEOP_US_T_[

.....22

21
c>,, .........

11 ....... (.--3........ CU _r3
T PROG
_ ......
18
19
20

...................

Press to select setting modes from the on
screen

-7-

Press to stop the

nlenu.

Press to enter digits when setting program.
(for example: setting clock or timer program)
EN
9103

- REAR VIEW -

g
®
®

+100 button- When selecting cable channels which
are higher than 99, press this button first, then press
the last two digits. (To select channel 125, first press
the '%100" button then press "2" and "5").
16 MENU button- Press to display the main menu on
the TV screen.

8 REW button- Press to rewind the tape, or to view
the picture rapidly in reverse during playback
mode. (Rewind Search)
"_1button* Press to select a mode from a particular menu.
(for example: LANGUAGE or USER'S SET
UP)
9 PLAY button- Press to begin playback.
A button* Press to select setting modes fi:om the on
screen

17 DISPLAY button- Display the counter or the current channel number and current time on the TV
screen. (See page 25.)
18 SPEED button- Press to choose the desired
recording speed:SP/SLR
19 T-PROG. CLEAR button- Press to cancel a setting
of timer program. (See page 23.)
COUNTER RESET button- Press to reset counter
to 0:00:00.

nlenlJ.

* Press to enter digits when setting program.
(for example: setting clock or timer program)
10 F.FWD button- Press to rapidly advance the tape,
or to view the picture rapidly in forward during
playback mode. (Forward Search)
button* When setting program (for example: setting
clock or timer pro_am), press to determine
your selection and proceed to the next step you
want to input.
* Press to determine setting modes fi:om on screen
nlenu.

12
13

14
15

* Press to select a mode from a particular menu.
(for example: LANGUAGE or USER'S SET
UP)
REC button- Press for manual recording.
OTR button- Activates One Touch Recording.
(only on the TV/VCR)
RECORD indicator- Flashes during recording.
Lights up in the Stand-by mode for Timer Recording.
EARPHONE jack- Connects to earphones (not
supplied) for personal listening. The size of jack is
1/8" monaural (3.5mm).
Cassette compartment
Number buttons- Press to select desired channels
for viewing or recording. To select channels fi:om
1 to 9, first press the 0 button and then 1 to 9.

-8-

20 GAME button- Sets the game mode and selects front
AV input mode at the same time. (See page 14.)
21 SLOW button- Press to start slow motion playback.
22 PAUSE/STILL button- Press to temporarily stop
the tape during the recording or to view a still picture during playback.
Frame Advance function- Press to advance the
picture one fi:ame at a time during Still mode.
23 MUTE button- Mutes the sound. Press it again to
resume sound.
24 CHANNEL RETURN button- Press to go back to
the previously viewed channe!. For example,
pressing this button once wil! change channel display from 3 (present channel) to 10 (previously
viewed channel), and pressing it a second time
will return fi:om 10 to 3.
25 WAKE-UP/SLEEP button- Sets the Wake up or
Sleep Timer. (See pages 23 and 24.)
26 (13" model) TV/FM button- Sets the FM mode.
(19" model) EdEDT button- Press to remove tape
fi:om TV/VCR.
27 ANT. terminal- Connect to an antenna or cable
system.
28 Power cord- Connect to a standard AC outlet.
(120V/60Hz)
EN
9103

PRIi]PA/ ATI©
"

.......

From Cable System
or Satellite Dish

lJJ

iL!

..syse.

"i_

_(N

HF/U HF Antenna
ot supplied)

_H
=

F Antenna
(Not supplied)
UHF Antenna
(Not supplied)

VHF/UHF
or Combiner
(Not supplied)

75-ohCoaxia_/l}l
m
--'_or

Cable (Not s_,_[

The VHFA/HF Rod Antenna (supplied with 13"
model only) is detachable. Insert the stem of the
antenna into the hole on the upper-back portion of
the TV/VCR. Connect the VHF/UHF Rod Antenna or
VHFAIHF Combination Antenna to the ANT. terminal of the TV/VCR as shown in the diagram. For the
best reception, fully extend the VHF/UHF Rod
Antenna and make the necessary adjustments. (Avoid
touching the top section when adjusting.)
NOTE:
Before connecting the Rod antenna into antenna terminal, check that the pin is not bent. If it is bent,
straighten the pin as illustrated, then plug the pin into
antenna terminal.

Flat twin-lead

cable

In some areas it will be necessary to use an outdoor
antenna.
L5¢ ;*_:,_MBL t;R Y_?_
Use this connection if your cable system connects
directly to your TV/VCR without a converter box.
By using this connection you can:
1) Use the TViVCR Remote Control to select channels.
2) Program one or more unscrambled channels for
Timer Recording.
NOTE: This unit will ONLY record and view the
same channel.
)'IHIAI'I Y'? 'II (;Z)/_+,,I'Ii,IiI ?TAP"
I}L>_,CH 4 4:'Fli%KH II_;_ )({" H,,I TLILLI ?'LI

Bent pin

If your cable service supplies you with a converter
box or if you use a satellite system, you can use the
basic connection shown in the diagram.
By using this connection you can also record scrambled channels. However, channel selection mtlst be
made with the converter box or satellite box. This
means that channels cannot be changed using the
TV/VCR Remote Control. Unattended timer recording is limited to one channel at a time.

Plug

(Needs to be straightened)

....

13" model only)

(Not supplied)

Cable

Rod Antenna
(Supplied with

Satellite Box or
Cable Box

From

/i()R

(Straight

pin)

NOTE:
The connection of an Rod antenna may not always
give acceptable TV reception.

Note to CATV system installer:
This reminder is provided to call the CATV system insta!ler's attention to Article 820-40 of the NEC that
provides guidelines for proper _oundJng and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.
-9-

EN
9103

TO RECORD A SCRAMBLED/UNSCRAMBLED
CHANNEL
1) Set the TV/VCR channel selector to the output
channel of the Cable Converter Box or Satellite
Box. (Example: CH3)
2) Select the channel to record fiom your Cable
Converter Box or Satellite Box.

1)Open the battery conapamnent cover by pressing
the cover on the remote unit in the direction of the
arrow.
2)Insert 2 "AA" penlight batteries into the battery
compartment in the direction indicated by the
polarity (_/-) markings.
3)Replace the cover.

When using an external input signal (another VCR,
video game or video camera), connect the player's
audio/video output cables to the AUDIO IN/VIDEO
IN jacks of your TV/VCR. Then press the CHANNEL a` or 'V button until "AUX" appears on the
screen.
NOTE: "AUX" is found below the
lowest memorized channel.
(Example: CH2)

AUX

SE'I UP F©R USE
q

Press the MENU button on the remote control to
return to TV mode.

'_
r_ eTV/VCR :>ow_e_'
co,d
Plug the TV/VCR power cord into a
standard AC outlet.

NOTE: If t%r some reason the menu is in Spanish or
French, press the ME_Y button on the remote control, press the PLAY/a, button to point to "IDIOMA
[ESPANOL]" or "LANGAGE [FRAN_AIS]", then
press the F.FWD/mI,+button, then press the MEN_Y
button on the remote control.

NOTE:
If some digits appear in the comer of
the screen, press the POWER button
x_ithout unplugging the pox_er cord.
Make

sure

...

* Press the POWER button to mm on the TV/VCR.
NOTE: This function effects only the language on
the screen menu and not the audio source.

Press the MEN_; button on the
remote control,
Press the PLAY/a` or STOP/T button to point to "LANGUAGE".

_+_,,_..............
o_oo_
CHAHNEL SET UP
us++_
s+_op
+++o°
......++,o+_°+_
....
...........
V CHIp

SET

CANGklAGE

Ur'

ENGUSH

....

The TV/VCR clock nmst be set correctly before timer
recording is possible. It is suggested that the clock be
set manually when first setting up the TV/VCR. Then,
set to [ON] the auto clock setting which will periodically correct the setting if necessary.
NOTE: ffyou cannot receive a station with time
signals, auto clock setting cannot be performed. Use
manual setting only.

_ Se_ec_ "IENGII,,,,,,{SH",
'ESIPA}4OL" or
_FRAHgAIS"
Select "ENGLISH",

"FRAN_AIS ''

"ESPANOL"

Spanish

French using the F.FWD/_

or
or

Make sure ...
* The TV/VCR is turned on.

REW/-_I button.

- 10 -

EN
9103

In the example below, the clock is to be set to.
DATE
May 6th, 2004
SETTING TIME
5:40PM
"J Seect S}I{TTb<'G©LO©b::'
Press the MENI/button on the
remote control.
Press the PLAY/I, or STOP/T
button to point to "SETTING
CLOCK".

_ St;a _:H;e coo/<
Press the MENU button on the
remote control.
Although seconds are not displayed, they begin counting l:rom
00 when you press the MEN_/button on the remote control. Use this
feature to synchronize the clock with the correct
time.
NOTE:

TIMER PROGRAMMIN6
PICTURE OONTROC
SETTING OLOOK
CHANNEL SET UP
USERS SET UP
V CHIP SET UP
LANGUAGE [ENGLISH]
CAPTIONMENU
/O_F]
ZERO RETURN
T_dE SEARCH
INDEX S£AROH

Then, press the F.FWD/I_ button.

Press the PLAY/at or STOP/T

When unplugging the AC cord or if there is a power
*:ailure fi_r more than 3 seconds, you may have to
reset the clock.
...........

(

AUTO

CLOCK SET".

GLOGK

SET

D8 •

button press
Then,
to point
the to
F.FWD/I_
"MANUAL
button.

_;}_ S_ee

/'e

8;q©

Press the PLAY/_ or STOP/T
button until your desired month
appears. (E×ample: May -->05)
Then, press the F.FWD/_ button.

70 (+Md,k(7;f7 ZO7£

OH SEARCH

...........
MANUAL

i0_1
/OFF]

'_ .........

_o_

t_AHUALCLOCKSE_

............
k
......
0 5_

_/£7+777YQ,

If you want to change the clock,
1)Follow steps [1] and [2].
2)Select where you want to change using the
F.FWD/_ or REW/-_ button.
3)Enter correct numbers using the PLAY/at or
STOP/T button.
4)Press the MEN_; button on the remote control to
start the clock.

...........

PLEASE NOTE:
Press the PLAY/_ or STOP/_ button until your desired day appears.
(Example: 6th --+ 06)
Then, press the F.FWD/_ button.

If there is no local PBS station in your area or on
your cable system, select "AUTO CLOCK" and
press the F.FWD/_ or REW/"q button to turn [OFF]
this function. Then you can manually adjust the
clock.

_..... _ .....
0_o_
..........

Press the PLAY/_ or STOP/T button until your desired year appears,
(Example: 2004)
Then, press the F.FWD/_ button.

_..........
sR
o_, .................
...........

Press the PLAY/A or STOP/T button until your desired hour appears.
(Example: 5, PM)
Then, press the F.FWD/_ button

_...........
0...........
_?_=_o_
....
....

_'_ Oi
+_'

::4;

Press the PLAY/A or STOP/T button until the desired minute
appears. (Example: 40)

_ANUA_
C_OCn
S_T

_...........
............
..........
05

ply}

,47; 7LkD'F;'I?7_7 770U'I(
q[Of, a
Press the F.FWD/_ button until
"AUTO CLOCK [ON]" appears•

" _"'
,+,}
{:_Bgi>
..... IU'TO,.,L,.
CK _"
.... SEAAObi
Press the STOP/'V button to select
SETTING CLOCK
"AUTO CLOCK CH SEARCH".
AUTO CLOCK
[ON]
Press the F.FWD/_ button•
_o_o_
................
o_oo_
c. r0_
MANUAL

* The TV/VCR is now
*\_rthe station x_hich
auto clock set signal.
for a signal may take
seconds per channel.

searching
contain the
The search
up to 20

CLOCK

SET

O_T

To<

* Last Sunday of October : At 2 AM the clock
immediately changes to 1 AM.
Make sure...
* Press the POWER button to mrn on the TV/VCR.
@
>

* ....
appears at the lower left of I .................
the screen when the search has / .....
ended•
/
* Auto Clock station- write down [
the number(s) that appear on the L
screen• These are the auto clock
station(s) in your area• See item 4 below.
* If no number(s) appear on the TV screen, there are
no stations in your area which contain the Auto
Clock signal. Auto Clock Setting is not possible•
Please use Manual Clock Setting on pages 10-11.
Press the ME_; button to exit the screen•

<'_ isecame

Auf:omatc©ock

; /_rbu
Se

/:ha

_,ME_
pRo_=v,._
_USERS
..........
SET UP
.........
CAPTION [OFF]
..........
TIME SEARCH

Then, press the F.FWD/I_ button.

..........

/,,_

If /

' :)_/_g7

}

Press the PLAY/_ or STOP/T button to point to "D.S.T.".
Then, press the F.FWD/_ or
REW/-_I button until [ON] appears.

]_ /!:ix/: t

e /:)a

t 5i_av _s*'_

MEN

PICTURE

CHANNEL

CONTROL
SET

LANGUAGE

IENGLISH]

/+s,)

_..........
AUTO CLOCK

{ON]

mo(e

PresstheMEiX_ buttonon theremotecontrol
to
return to TV mode.

co_'s{a _s _: e

sgSg/"_a

Press the MEN_; button on the
i"
....
control.
Press the PLAY/_, or STOP/_ but .............
O_ER*
_ uo
CHP SET UP
ton to select "SETTING CLOCK . ! v........
{.......
/
Press the F.FWD/_ button to enter t ZERO
..........
RETRN
"SETTING CLOCK" menu.
f
Press the STOP/T button to select
"AUTO CLOCK CH".
"k _I_
_kgg_
.... [o_
AUTO CLOCK CH
[ 451

relnote

(,¢'# , _,
4..... s:_> :1:
....F 'I"

Press the MINT; button on the
remote control.
Press the PLAY/_ or STOP/T button to point to "SETTING
CLOCK".

NOTE: During Auto Clock CH Search, the picture
may be distorted• This is normal.
_g Er

7VVOR

PICTURETIMER
PROGRAMM
NGcoNTROL

SETTING

CLOCK

CAPTION

[OFF]

INDEX

70 UTI/CUWL 7It£
77MIT

l:):I 1U;1[7t77:%:_

I/YG

Repeat steps [1] to [21, select [OFF] using the
F.FWD/_ or REW/-_I button.

Press the F.FWD/_ or REW/'_I
_ _d$N#
.......... TO<
buttons until you locate Auto
Clock Set station number. See item
3 above•
Press the MEN_; button to exit the screen•

- 12 -

EN
9103

You can program the tuner to scan all the channels
you receive in your area.
NOTE: Channel memory programming is NOT
needed when connected to a cable box or satellite
box. Just select the TV/VCR channel selector to the
output channel of the cable box or satellite box (Ex
CH3). Then select the channel to be viewed on the
Cable Box or Satellite Box.

The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you
can add the deleted channel into the memory again.)
"[ _b<<<;0/4/_4_4_1}/_
SE'/UP'
Press the MEN_I button on the

(

.....
SE_ING

_llke

S[Ire

...

V CHIP

* Press the POWER button to mm on the TV/VCR.

control.

SET

Og o

CAPTION
[OFF]
TIMKRPROGRAMMINGpcTURE
CONTROL
INDEX

Then, press the F.FWD/_
'_ Seeet

CLOCK

Press the PLAY/A or STOP/_' but- '_ ............_,o_
ton
to point to "CHANNEL SET
........ _......
remote
UP".
TIMESEARCH
..........
SEARCH

button.

CHANN_;/ SET UP

Press the MEN_I button on the

(

.....
Press the PLAY/A or STOP/T but- , ............ c,,,0
'_............
u_E__
ton to point to "ADD/DELETE
..................
o_,,o_.........
_o_r
.......
CH".
r_MERP,CrUREPROG_MM,_
CO_rRO_
ZERO
RETURN
...........
Press the F.FWD/_ button.
SETTING CLOCK

Press the PLAY/_, or STOP/T button
to point
to "CHANNEL SET
remote
control,
UP".
Then, press the F.FWD/_

V CHIP

INDEX

SET

button.
E tethedes_ed
esa_ e u>be_ _
Press the PLAY/A or STOP/T button until your desired channel number appears. (You can also use the
0s
number buttons or the CHANNEL
A/V button to enter it) (Example:
..........
CHS)
* When selecting cable channels which are higher
than 99, press the +100 button first, then, press the
last two digits. (Example: to select channel 125,
first press the -100 button then press "2" and "5").
* You must proceed single-digit channel numbers
with a zero (Example: 02 ... 09).
_!_

2 i}}e{/_ 8_/o > e_>e{
Press the PLAY/A or STOP/T button to point to "AUTO CH PROGRAMMING".
Then, press the F.FWD/_
button.
The tuner scans and memorizes all
the active channels in your area.

ADD / DELETE OH (CAW)
AUTO OH PROGRAMMING

CHANNEL SET UP

_)) AXe scan_ g
The tuner stops on the lowest memorized
* When AUTO CH PROGRAMMING is
where there is no TV signal input, "NO
NALS" will appear on the display after
pletion of the channel scanning.
* The TV/VCR may display TV channels
CATV channels caused by poor antenna
In this case, try auto preset again.

channel.
activated
TV SIGthe comto be
reception.

Deete{o
add} tf_'o*q( _to}¢_er_oy
Press the F.FWD/_ or REW/'_ button. The channel
number changes to light red. The channel is deleted
from memory.
* To delete another channel, repeat steps [3] and [4].
* If you press the F.FWD/_ or REW/_I button
again, the channel is memorized again.
Added channel: Light blue.
Deleted channel: Light red.
_; i!_ixitthecB
_e se_pmode
Press the MEN_I button on the remote
returns to TV mode.

control

NOTE: To confirm that channel(s) has been deleted
or added, press the CHANNEL _ or V button.

- 13 -

EN
9103

TV O//,RATIO.

The TV/VCR's picture controls BRIGHT, CONTRAST, COLOR, TINT and SHARPNESS
arc
preset to factory specifications. Although they are
usually the best, you may need to make some further
adiustments *\_ra natural looking image.
NOTES:
* Procedures must be followed within 5 seconds or
the Picture Control mode will be cancelled.

'J X,_r on eTVfVCR
Press the POWER button to mm on the TV/VCR.

Press the CHANNEL at or T button to select your
desired channel nunrber or press the number buttons
on the remote control.
Remember: If the TV/VCR is connected to a cable
box or satellite box, the TV/VCR must be on CH3 or
CH4, then the channel to be viewed nmst be selected
on the cable box or satellite box.

* When setting the Picture Control, the Game mode
will be cancelled.
Make

if A@_st soun<
Press the VOLUME A or V button
to adjust the volume.

:) o_;
;_- {'.....: _l

or REW/-_ button to adjust to

,4)I)£

Press the GAME button or CHANNEL at or T button on the remote control.

REW/-_I
to decrease
brighmess
to decrease
contrast

F.FWD/_
to increase
brightness
to increase
contrast

COLOR

to pale

to brilliant

TINT
SHARPNESS

to purple
to soft

to green
to clear

BRIGHT
CONTRAST

This television has a degaussing circuit that will clear
up color errors on the TV screen that arc caused by
any excess magnetism which happens to get too close
to the TV. This circuit is designed to operate once
when the set is first plugged in. If minor color errors
are seen in some locations on the screen, please
unplug the TV for approximately 15 minutes. When
the TV is plugged back in, the degaussing circuit wil!
operate once to clear them up. Repeat this procedure
any time the TV screen is accidentally magnetized, or
when the TV is moved or relocated.

* If there
retain

is a power

failure

of an),

kind,

the

unit will

its setting.

EN
9103

_TL>,
L YOi ', M)©E

The On-Screen Display will disappear aRer 5 seconds.
* This is also true when the MUTE button is pressed,
and when the PAUSE/STILL button is pressed
while recording.
* If there is a power failure of any kind, the unit will
retain its nrenrory _\_rthis feature.

%177" 117>
Make sure ...
* TV/VCR is tamed on.
* You have the TV/VCR remote control.
'_ S<,<.c_: V C;;_,/PS/_!'7{!P"
Press the MENU button on the
....
PICTURE CONTROL
remote control.
S_T,,_
o_oc_
Press the PLAY/_, or STOP/T but ...........
ton to select 'W-CHIP SET UP".
==o.......
==.o_,'<
TIldER

PROGRAMM

CHANNEL
SET UP
USERS
SET UP
LANGUAGE

TINIE

Then, press the F.FWD/_
2

button.

{ENGLISh]

_.........

g_'_ e_ Acce l;_LO4 £//:I) Vi:O(111 iI-I IA:UK[I
Note: To change the rating, the TV/VCR must be
turned to a station that is not protected. If the (PROTECTED) appears on the screen, please change the
channel to a station that is not protected.
1)Follow steps [1] and [2].
2)Press the F.FWD/_ button to select "TV RATING". Select a TV rating to be unblocked by pressing the PLAY/a, or STOP/T button.
Then press the F.FWD/_ button to unblock the
rating.
3)Press the ME_; button on the remote control to
exit the screen.

5"M:>'_A
£d775_

7 ?£Y [7 >

'_ Seect >O}{P SET UP"
_"°
Press the MINt} button on the
==_,=_
.............
°=oo=
remote control,
os_=s
s_,op
Press the PLAY/A or STOP/V but........ZERO RETURN
to<
ton to select "V-CHIP SET UP".
...........
Then, press the F.FWD/_ button.
T{MER

i,,

_%U

?,'

";_
ACCESS

CODE

Use the number buttons on the remote]
control to enter the access code.
/

V °HIP

[

INDEX

if Seec_ TV _:,_:..... I'd{i, sA I';8A[INIG

_;,

button to select "D"(Suggestive
Dialog), "L"(Coarse Language),
Press
the STOP/T
or PLAY/_
"S
'(Sexual
Situation),
or

RATING

Press the PLAY/_ or STOP/V but...........CHANGE CODE
ton to point to "MPAA RATING".
Then, press the F.FWD/_ button.

[SLO©K]

Press the PLAY/_ or STOP/V button to point to your desired item.
Then, press the F.FWD/_ button to
select [BLOCK] or [VIEW].

o_oc_
,_oc_
DLOC_q
DLOCKI
_oc_

__
p
[_ 8

"V"(Violence). Then, press the
F.FWD/_ button to select [BLOCK] or [VIEW].
Note: When you select [TV-MA], "D" does not
appear on the TV screen.
I
* The sub-ratings which set to
[,__rv _Y7 (
[BLOCK] appears next to the rat- [
_
ing categor
n the TV rating
.... __
L

,,.........
TV

[6LOCK]

_22_;<:I"Acc, ess. o:>@:_

Use the numbers

Press the STOP/T button to select the sub-rating you
x_ish to block. Then, press the F.FWD/_ button.
* When you select [TV-Y7]:
Press the STOP/'g or PLAY/_
button to select "FV" (Fantasy
Violence).
Then, press the F.FWD/_ button
to select [BLOCK] or [VIEW].
* When you select [TV-PG], [TV-14] or [TV-MA]:

gET

SET

LANGUAGE

Note: Defimlt code is 0000.

PR©GRAMM}NG

°HANNEL

TV
TM

(DLSV}

)

_,=_a
[VlE_a
_'_
r_oon
[TLOCK]

[6LOOK]

-i_
__
xNC 17

v'='_,=_
r,,=,,,q
[_LOCK]
[8LOCK]
r=_oon

Selection
G

Rating Category Explanations
General Audience

PG
PG- 13

Parental Guidance suggested.
Unsuitable *br children under 13

R
NC-17

Restricted; under 17 requires accompanying parent or adult guardian
No one under 17 admitted

Mature audience only

* When you select the rating category and turn it
[BLOCK], the higher rating will turn [BLOCK]
automatically. Also, the lower rating will mm
[VIEW] automatically.
* When you mm "G" to [VIEW], then all ratings
will turn to [VIEW[ automatically.

nlenl_l.

5 E_
shoAe
Press the MEN_I button on the remote control to
enter the setting and exit the screen.

- 16-

EN
9103

_!_ Ext tseV, C/" p setting >ode
Press the MEN_I button on the remote control to
enter the setting and exit the screen.

_ Exit theVO/spset/:
9 rode
Press the MEN_; button on the remote control to exit
the screen.

( M :I?_(i£ ,A4__: l>%,; _(:)bl!i

Note: If you unplug the power code or power *hilure
occurs, the changed access code will be lost and will
remm to default (0000). Change your access code
again as necessary.

To change access code, t\dlow the steps.
"_ Se/ec
V,OI,,III
:_SET UP'
Press the MENU button on the remote control.
Press the PLAY/A or STOP/'V"button to select "VCHIP SET UP".
Then, press the F.FWD/_
]_'

Access

Use the nunlber
trol

This function enables you to receive FM radio broadcasting.
"
i{

button.

c)(

on the remote

I£ ,>
,,_:,

,
0:

_]l_a
;:

,
11_

_>
<>

Press the TV/FM button on the
remote control. The radio frequency _

ACCESS
CODE

FMss.0MH_

appears on the TV screen.

con-

to enter the access code.

Note: The de*hult code is 0000.

,,> .................. , ......... OO[)E
_.........
Press the PLAY/A or STOP/_' but ...........
ton to select "CHANGE CODE".
Then, press the F.FWD/_ button.

[

RATING

CHANGE

Se/ec(/_e radio

fs'e B e cy

yo_ wa_sl/o eceive

Press the CHANNEL _ or T button until your
desired radio frequency appears.
NOTES:

CODE

* The radio frequency indication repeats to appear
and disappear.
* You can not record the FM radio station.
* If you receive a weak radio signal, you lnay change
the FM Antenna mode to INT(internal) or
EXT(external) by t\dlowing the step below.
1)Press the MEN_/button. Press the PLAY/_, or
STOP/T button to point to "CHANNEL SET UP".
Then, press the F.FWD/_ button.
2)Press the PLAY/_ or STOP/'_ button to point to
"FM ANTENNA". Select [INT] or [EXT] using
the F.FWD/_ or REW/'_I button.

_ _!:i_ e New code
Use the number buttons to enter
your desired access code in the
........
NEW CODE space. Then enter
CONFIRM CODE
the same code in the CONFIRM
EZZZ1
CODE space. V-CHIP SET UP
screen appear on the screen.
* If you enter wrong code, repeat step 4, making
sure you enter the same new code exactly in the
confirm code space.

This TV/VCR wilt operate with any cassette that has the _
mark. For best results, we
recommend the use of high-quality tapes. Do not use poor quality or damaged tapes.
/'°/5££

't _C(74

Insert the cassette in the direction as shown. Push in
gently, but continuously, on the center-back of the
cassette until it is drawn into the TV/VCR. The
TV/VCR will automatically turn on.

CORRECT

* Avoid moisture. Moisture condensation may occur
on the tape if it is moved from a cold place to a
warm place or visa versa. Before using a tape with
these conditions, to avoid damage of the tape and
your TV/VCR, wait until the tape has warmed to
room temperature and the moisture has evaporated.
* Avoid extreme heat, high humidity and magnetic
fields from speaker systems.
* Do not tamper with the cassette mechanism.
* Do not touch the tape with your fingers.

WRONG

- 17-

EN
9103

7Y} _d?C(Z:L

* TV/VCR power must be turned on.

If there is a power failure of any kind, the unit
will retain its memory for this feature.

If the erase-protection tab has been removed, the
TV/VCR will start playback automatically.
( .....

[

This feature is very useful in finding or skipping over
a particular scene on a tape. in this mode, the sound
will be muted.

Note: If any menu is activated on
the screen, the PLAY button does
not function. Press the MENU button to clear the menu, then press the PLAY button.

1)You may view a video tape at a high speed in
either a forward or reverse direction by pressing
the F.FWD or REW button during playback (in the
SP / LP / SLP modes).
2)Press it again and the TV/VCR will now search in
super high speed (in the LP / SLP modes only).
NOTE: Tapes recorded in the SP or LP mode will
display a noise bar on the TV screen and the picture may revert to Black and White. This is normal.
3)Press the PLAY button to remm to normal speed.

]_
stop >;:_ba_:l;
Press the STOP button x_hen playback is completed.

The TV/VCR has an auto repeat function that allows
you to repeat a tape indefinitely without touching the
PLAY button.

ZkIR,_
>1 ......

l,>;r_vs
+
.......

'_Slot: a ,<_,
Rewind or t:ast %r_ ard the tape to the beginning
point from which you want to review.

Press the COI_E',rTERRESET button repeatedly.

Press the RECORD or PLAY button.
Press the STOP button when recording or playback is
completed.

Press the MEN_} button on the remote control to
return to the TV mode.

"f%_ctivale Z[]RO

/}¢1;'t

17°['JRI4
MENU

I _I.=,

? # 'RN

This function allows you to search easily a beginning
point that you want to review by rewinding or *;ast
%rwarding.
NOTE:

Press the PLAY/,t or STOP/T button to point to "REPEAT PLAY".
AO_O.............
==,o_= >U....
Press the F.FWD/_ or REW/'_I
button repeatedly until your desired
selection TALL1 or [BLANK] appears.
]I l£xI

PL, IFM¢)MI5"

Repeat steps 111and I21, select [OFF] using the
F.FWD/_ or REW/-_ button on the remote control.
Press the MEN_I button on the remote control to
return to TV mode.

Make sure ...

2 I i>e{j> : u?ii>g<;_
Press the PLAY button.

'M_i/{fF;iPAI:_7

i .....

TIMER
pR©GPdkMMING
PIGTURE
OONTROL
SETTING
CLOCK

Press the MEN_/button on the
............u_===S=TUP
remote control.
LANGUAGE EENGLSH]
Press the PLAY/_, or STOP/V but............
ton to point to "ZERO RETISRN".
Then, press the F.FWD/_ button.
The counter will appear on the TV screen.
The tape will automatically stop when the counter
returns to 0:00:00.

V CHIP

Press the PLAY button to start the Repeat Play.
"REPEAT PLAY _" appears.
* Once you select the Repeat Play mode, it stays in
effect even after you turn off the TV/VCR.
* If the Rental mode is set [ON], the "RENTAL
PLAY _" display has priority.

INDEX

SET

CAPTION
[OFF]
ZERO RETURN
SEARCH

EN
9103

The Time Search function makes it possible to quickly advance the tape to your desired position simply by
entering the exact amount of playback time you want
to skip.
NOTES:
* Time Search can be set up to a maximum of 9
hours 50 minutes (9:50) by 10 minutes at a time.
* This function will not operate in recording mode.
In the example below: To watch a program that is 2
hours, 50 minutes from the present tape position, in
either direction.
'_ rser

* After index search, the TV/VCR will play the tape
automatically.
* In some cases, the index mark at the beginning of
video tape cannot be detected.

Press the SLOW button to reduce the playback speed.
The TV/VCR nmtes the sound during slow motion.
Press the PLAY button to return to norlnal playback.
NOTE: If left in the Slow mode *%rmore than five
minutes, the TV/VCR will automatically go into the
Stop mode.

a/ape

This function enables you to improve the picture
quality when playing back worn cassettes such as
rented tapes.
'_ Seect

Press the PLAY/A or STOP/'V button until your
desired time appears. (Example: "2:50" stands t%r2
hours 50 minutes)
If you wish to cancel the Time Search at this point,
press the ME_; button on the remote control.

USERS

SET

Press the MENU button on the
remote control.
Press the PLAY/a, or STOP/'V button to point to "USER'S SET UP".
Then, press the F.FWD/_ button.
Y',

By pressing the REW/_,9 or F.FWD/_ button, the
TV/VCR will rewind or thst forward to the specified
point.
The time counts down as the searching progresses.
When 0:00 is reached, the tape will start playback
automatically.

Press the PLAY/_ or STOP/_" button to point to "RENTAL".
Press the F.FWD/_ or REW/-_I
button until [ON] appears.

TIMER PROGRAMMING
PICTURE CONTROL
SEJTING CLOCK
CHANNEL SET UP
USElesS SET UP
V CHIP SET UP
LANGUAGE [ENGUSH]
CAK_ON MENU
[OF_]
ZERO RETURN
TIME SEARCH
INDEX SEARCH

USERS SET UP

RENTAL

....F@NI>

_g_%_

Press the MENU button on the remote control to
remm to the TV mode.
Press the STOP/EJECT button on the TV/VCR or the
remote control. This will delete the selected time.
I-°'+_
)LTIY_iLbl 6ii;M

Start playback4
Press the PLAY button to start playback. "RENTAL
PLAY _" appears.
* Once you select the Rental mode, it stays in effect
even after you turn off the TV/VCR.

An index signal is recorded on the tape automatically
when the recording is started. To view a recording at a
specific start point:
;,_Y,ICAi_ 7LL "/MI£ !{V!UVT/'_i; ;!1Q'71}17:7
MENU
1)Press the MED_Y button on the
_,,
..............
Repeat steps [1] and [2], select [OFF] using the
remote control. Press the PLAY/A
CHANNEL SET UP
............
F.FWD/_ or REW/-_ button on the remote control.
or STOP/_" button to point to
..........
Press the MEN_I button on the remote control to
"INDEX SEARCH", then press
.........
TIME SEARCH
remm to TV mode.
the F.FWD/_ button.
_ ...........
If there is a power failure of any kind, the unit
2)Press the PLAY/A or STOP/'V button within 30 secwill remember the setting.
onds until the number of programs that you want to
skip appears.
3)Press the F.FWD/_ or REW/_ button to start
index search. If you want to go forward, press the
F.FWD/_ button. If you want to go back, press the
REW/-_I button.
- 19EN
PICTURE

USERS

CONTROL

SET

LANGUAGE
CAPTION

[ENGLISH
/©FF]

9103

In the Pause/Still mode only. when the picture begins
to vibrate vertically, stabilize the picture by pressing
the CHANNEL _ or 'V"button.
NOTE:

,, Tracking adjustment will be set automatically
(Digital Tracking function) when you start playback.
,, However when playing pre-recorded tapes or tapes
recorded on units other than your own, noise lines
(black and white streaks) may appear on the playback picture. If this occurs, you can adjust the
tracking control manually by pressing the CHANNEL _. or T button until the streaks disappear. To
return to the DTR function, stop the tape once and
start playback again.
* You can reduce the noise lines by pressing the
CHANNEL A or _' button in slow mode, too.
Tracking adjustment in Slow mode will not be set
automatically.
NOTE:

If there are video noise lines on the screen, see Tracking
Adjustment section.

You can view a still picture on the TV screen during
playback (the Still mode). Press the PAUSE/STILL
button during playback. Only tapes recorded in the
SLP mode will show the least amount of lines. Press
the PLAY button to remm to playback.
NOTES:
* You can advance the picture one frame at a time by
pressing the PAUSE/STILL button during the Still
mode.
* If it is left in the Still mode for more than five minutes, the TV/VCR will automatically switch to the
Stop mode.

* In Still mode, press the SLOW button and press the
CHANNEL A or T button until streaks disappear.
To remm to Still mode, press the PAUSE/STILL
button again.

Make

The desired channel is selected by pressing the number buttons on the remote control or the CHANNEL
Up/Down button. (If the TV/VCR is connected to a
cable box or satellite box, the TV/VCR must be on
CH3 or CH4, then the channel to be recorded is
selected on the cable box or satellite box. )
There is a tape with its safety tab into the VCR.
The desired recording speed is selected in SP(standard play) or SLP(super long play) mode by pressing the SPEED button on the remote control.
Tape Speed

Recording/Playback

Time

IType0ftape
SP mode

T60
1 hour

T120
2 hours

T160
2-2/3 hours

SLP mode

3 hours

6 hours

8 hours

You can prevent accidental erasing of recording
by breaking off the tab
on the back edge of the
cassette.

...

1)Begin the recording by pressing the RECORD button.
To temporarily stop recording or resume it, press
the PAUSE/STILL button. After the TV/VCR has
been in Pause mode f\_r 5 minutes, it will stop
automatically to plotect the tape and the video
head.
NOTES:

If you decide to record
on the tape again, cover
the hole with plastic
tape.

Plastic

sllre

* TV/VCR power is turned on.
* Insert a cassette tape with its erase prevention tab
in place. (If necessar> rewind or fast forward the
tape to the point at which you want to begin
recording.)
NOTE: This unit will ONLY record and view the
same channel.

* After five minutes, the TV/VCR will automatically
switch to the Recording mode to prevent tape
damage.
* If"CLOSED CAPTION (ON)" is selected, the
On-Screen Display will appear f\_r 5 seconds, then
disappear.
2)Stop the recording by pressing the STOP button
when recording is completed.

Tape

EN
9103

This function enables you to set the recording length
simply by pressing the REC/OTR button on the
TV/VCR.
1)Begin OTR by pressing the
( oT=_=
30_
REC/OTR button on the
TV/VCR repeatedly until the
desired recording length appears.
Recording stops when 0:00 is
_P
reached.
NOTES:
* This function CANNOT be done from the remote
control.

Avoid overlap of programs ...
There is a chance that a pro_am will not be recorded. When programs overlap:
* The program with the earliest start time will record
first.
* Once the earliest program finishes recording, the
overlapping pro_ams will record in the order of
the program number.
* The illustration below demonstrates the sequence
of recording.
RecordingSequence
Program

{

10:00AM-!I:00AM
Program 2
9:00AM-!0:00AM
Program 3
9:30AM-12:00PM

* To stop the OTR operation, press the STOP button
on the TV/VCR or on the rmnote control.

{

i'
=

I
[

i
=

9:00AM

10:00AN
*Recording

* If the tape runs out bet\_re the end time, the
TV/VCR will switch to the Stop mode immediately, eject the tape and turn itself of£
* If you press the power button during OTR, the TV
monitor turns oft'. But the recording continues until
the selected length is reached.
Push@s)
1 push
2 pushes
3 pushes
4 pushes

Display
Recording length
(continuous recording)
0:30
30 minutes
1:00
60 minutes
1:30
90 minutes

17 pushes

8:00

11:00AN
period

12:00PN

is SHADED

Press the MEN_I button on the remote
Confirm "TIMER PROGRAM .....
MING" is pointed to by pressing
the PLAY/A button,
Press the F.FWD/_ button,
* If you have not yet set the clock,
"MAN_;AL CLOCK SET" appears.
stops [3] to [8] on page 11. Then set
recording.

control.
TIMER

pROGRAMMING

s_,,_..............
o_oo,
os_°
...........
s_To_
o......
to<
ZERO RETURN
NDEX SEARCH
•.........
If so, follow
the timer
V CHIP

SET

LANGUAGE

[ENGLISH]

480 minutes
,>,,;=4 y:>, desi'edpo{la

('-8)

Pressto the
PLAY/a,
or STOP/T
o__.......
ton
select
the desired
programbutposition.
,
',
f

You may set the TV/VCR to start and end a recording while you are away. You can set 8 programs to
record on specific days, daily or weekly within a 1
year period.
In the example below, the timer is"being set to record:
DATE:
July 4th, 2004
SETTING TIME: from 7:30PM to 8:50PM
CHADINEL:
CH61
TAPE SPEED:
SP
Make sure ...

Then, press the F.FWD/_

_,_"Is¢c;;>l;lI

button,

TIMER

PROGRAMM_N®

ii ;

'_ @I 'I14 _'I )@I'

Press the PLAY/A or STOP/T button until the desired channel nun>
CH _
fEGIN END
•
/
ber appears.
t
TIMER PROGRA_M_I6
(Example: CH61)
!! !!!
x
Then, press the F.FWD/_ button.
Remember:
If your TV/VCR is connected to a cable or satellite
box, you must set the TV/VCR to channel 3 or 4 to
match the output channel of the box. Then, select
CH61 on the cable or satellite box.

* If your TV/VCR is connected to a cable or satellite
box, you must set the TV/VCR to channel 3 or 4 to
match the output channel of the box.
* Clock is set to the correct time and date bel\_re setting the timer.
,>:1<: O/ _]0@
eve
y ;JiIy O[
* TV/VCR power is tamed on to pro_am it.
* To insert a cassette tape with its erase prevention
,
_
CH _JE
BEGN END
For once recording
E
x :,:, : :,:x
:x
tab in place. (If necessary, rewind or fast forward
the tape to the point at which you want to begin
Press the PLAY/at (up) button
!II'i IYi:: :x
recording.)
until the desired date appears.
* The channel you want to record is properly set in
(Example: "7/04" for July 4th). Then, press the
advance.
-21 EN
[_1,_

TIMER

PROGRAMMING

9103

F.FWD/_

button.

For every day recording : To record a TVpmgram
the same time on the same channel every &O'.
(Example: Monday through Sund[o=_
....
Press the F.FWD/_ or REW/-_I
button until [ON] appears. Then,
press the MERCI button on the remote control to
return to TV mode.

* While recording is in progress;
1)Press POWER button.
2)Press the STOP/EJECT button on the TV/VCR.

When all the timer recordings are completed, the
TV/VCR will rewind to the beginning of the recorded
program(s).
NOTE:
* If you press the POWER button while tape is
rewinding, the Auto Return will stop.

7Y} 7?LCH

TMFf, IILO:Z_I}_7._

I?"_.411

1)Press the POWER button so that the REC indicator
goes off.
2)Press the MENU button on the remote control.
3)Confirm "TIMER PROGRAMMING" is pointed

REPEAT

PLAY

+<._
Wg_te/tie recoded
Press the PLAY button.

p ogr_ _

7Y?

7',fy} I?I!: "I I<'C

[C FF_]

to.

4)Press the F.FWD/_ button. The details of programs appear on the TV screen.
5)Press the ME_I button on the remote control to
remm to TV mode.

Repeat steps [1] and [2], select [OFF] using the
F.FWD/_ or REW/"_ button. Then, press the MEN_I
button on the remote control to remm to TV mode.

* Make sure the channel you want to record is ploperly set in advance.
* It is not necessary to press the RECORD button for
timer recording.
* Recording begins automatically at the Start time.
* If you are recording using a Timer mode, you may
not operate the unit manually.
* The erase-prevention tab on the cassette must be in
place (or you must put tape over the hole).
* If the erase-prevention tab is removed, the cassette
will be ejected when the POWER button is pressed
to oft'.
* If the tape runs out before the end time, the
TV/VCR will switch to the Stop mode immediate131.and the tape will be ejected.

With this feature, after timer recording is finished,
the beginning of the recorded program(s) can be
searched *\_rautomatically.
'_ Select USIS[RS SET UP
Press the MENU button on the
remote control.
Press the PLAY/A or STOP/T button to point to "USER'S SET UP".
Then, press the F.FWD/_ button.

ll/ii,d

MI') M:

If there is a power failure of any Mnd, the unit
will retain its memory for this feature.

The Wake Up Timer function turns on the TV/VCR
without using the POWER button after a desired
period of time.
NOTES:
* Use the remote control for this procedure.
* Clock must be set to the correct time before setting
the timer.
* If you want to select [TAPE], you must insert a
cassette tape in the TV/VCR. The tape will start
playback automatically on your desired time.
'_ Select W,¢_KI_I{
UP'Y'IM{I!R
Press the WAKE-UP/SLEEP button
on the remote control once, and
confirm "ON/OFF' is pointed.
Press the F.FWD/_ or REW/-_I
button until [ON] appears.

MEbaU
TIMERPROGP4_MMJNG
PICTURE CONTROL
SE_ING CLOOK
CHANNEL SET UP
USERS SET UP
V OHIP SET UP
LANGUAGE [ENGLISH]
CAPTION IOFF]
ZERO RETURN
TIMESEARCH
INI)EX SEARCH

- 23 -

EN
9103

Seect 'IV or °fAP_?;'
Press the PLAY/A or STOP/T button until it points to "TV/TAPE".
Press the F.FWD/_ or REW/-_
button, and select [TV] or [TAPE].

The Sleep Timer function turns off the TV/VCR
without using the POWER button after a desired
period of time.
NOTE:
* This function does not operate during Recording
nlode.

{i_ Set wuke +4ptr<*e
Press the PLAY/_ or STOP/_' button until it points to "TIME".
Press the F.FWD/_ or REW/'_I
............
roll
TIMER
TV/TAPE
_
_
button until your desired wake up
+T,++ .!;?
time appears.
Each additional push x_ill increase (or decrease) the
time by 10 minutes.

Press the WAKE UP/SLEEP button on the remote
control until "SLEEP TIMER" appears.
Set seep

Press the MEN_; button on the remote control to
return to TV mode.
777 (' <_0_('£ ; T/L£

_'4£L;

tree

Press the PLAY/_,, STOP/T,
F.FWD/_
or REW/-_ button until
your desired sleep time appears.
Each additional push will increase
..........
r_00_
the time by 30 minutes up to 120 minutes.
Press the MEN_Y button on the remote control to exit
the Sleep Timer setting.

_/'P T?'_/7i£

Press the WAKE-UP/SLEEP button on the remote
control once, and confirm "ON/OFF" is pointed.
Press the F.FWD/_ or REW/-_I button until [OFF]
appears.

,, _L

,t/,,+,,:
+,

,, /_i'_
;', [it

Press the WAKE UP/SLEEP button on the remote
control until "SLEEP TIMER" appears.
To view the time left t\_r sleep timer, press the
WAKE-UP/SLEEP button twice, then press the
MEN_Y button on the remote control to exit the sleep
timer setting.

<.{)PY[N (+ A V D <} TA PE
You can make copies of video tapes made by fi:iends
or relatives for your enjoyment.

1)Insert a pre-recorded video cassette into the Source
(Playing) VCR or camcorder.
2)Insert a blank video cassette, or one you want to
record into the TV/VCR's cassette compartment.
3)Press the SPEED button on remote control for the
TV/VCR to select the desired recording speed
(SP/SLP).
4)Press the CHANNEL A or T button on the
TV/VCR until "AUX" appears on the screen.
NOTE: "AUX" is found below the lowest numbered
memorized channel. (Example: CH2)
5)Press the RECORD button on the TV/VCR.
6)Begin playback of the tape in the source (Playing)
VCR or camcorder.

WARNING: Unauthorized recordings of
copyrighted video tapes may be an
infringement of copyright laws.
Connect your TV/VCR and a Source (Playing) VCR
using the following diagram.
{9000000000
0000000000
O000OO0000
O000000000
000000000

+oooooo
oooooooooo
O00000OO

[ n
--

[TV/VC R]

"+° *_'_'_ _"

OOOOOO
000000
00000

[[[[[1

O000OOO_f
_0000oO

))

NOTE: For best results during copying, use the
TV/VCR's front panel controls whenever possible.
The remote control might affect the source (Playing)
VCR's playback operation.
7)To stop copying, press STOP/EJECT button on the
TV/VCR, then stop the tape on the source VCR or

[Ex: Source (playing)
VCR or camcorder]
Aud o/V dec _

• '

patch cord
(not supplied)

'_%"
--<:........
-_'%b_?_
"_>:_'

/
2 ....
_

camcorder.

EN
9103

"_ _ ..... "
ON S(,RE

:i_ T [)[SPLAY

To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote
control. Each time you press the DISPLAY button on the remote control, the TV screen will change as t\_llows:

* Counter mode: After 5 seconds, only
the counter remains. To clear it, press
the DISPLAY button.

Press
once

* Clock mode: After 5 seconds, only
the clock and the channel number
remain. To clear them, press the DISPLAY button.

g fV;HiT",,
77H;" L(93J #

/>77<

Pressonce

S ),9£ L5

OFF mode

Clock/Counter

mode

* The On Screen Display disappears after 5 seconds.
* This is true even if the MUTE button is pressed, or the
PAUSE/STILL button is pressed while recording.
[ sp

SPECIAL

COUNT 0234

FEATURES

This shows the elapsed recording or playback time in
hours, minutes, and seconds. (The displayed time
wil! not change on a blank tape or blank portions on
the tape.)The .... indication will appear when the
tape has rewound further than "0:00:00" on the tape
counter.

* When the end of a tape is reached during recording, playback, or fiast-forward, the tape will automatically rewind to the beginning. After rewinding
finishes, the TV/VCR will eject the tape and turn
itself to off.
* This fi_mctionis operative when Repeat Play is set
to the [OFF] position.
* The tape will not auto-rewind during timer recording or One Touch Recording.

T
T
MA N [T _,_'u
ENAN(.E

,:_,

(

,E,:_ /,'o,',,

* Wipe the front panel and other exterior surI:aces of
the TV/VCR with a soft cloth immersed in lukewarm water and wrung dry.
* Never use a solvent or alcohol. Do not spray insecticide liquid near the TV/VCR. Such chemicals
may cause dalnage and discoloration to the
exposed surfaces.

* Automatically cleans video heads as you insert or
remove a cassette, so you can see a clear picture.
* Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt
accumulated on the video heads after long periods
of use, or the usage of rental or worn tapes can
cause this problem.
If a streaky or snox_T picture appears during play-

back, the video heads in your TV/VCR
to be cleaned.

may need

1.Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner.
2. If a Video Head Cleaner does not solve the problem, please call our help line at 1-800-488-1222, to
locate an Authorized Service Center.
NOTES:
* Remelnber to read the instructions included with
the video head cleaner be%re use.
* Clean video heads only when problems occur.

* Should your TV/VCR become inoperative, do not
try to correct the problem by yourself. There are no
user-serviceable parts inside. Turn off; unplug the
power cord, and please call our help line at 1-800488-1222, to locate an Authorized Service Center.
- 25 -

EN
9103

If you have t\_llowed the instructions contained in this manual and have difficulty in operating your TV/VCR,
locate the PROBLEM in the left colunm belox_. Check the corresponding CORRECTIVE ACTION colunm to
remedy the problem.
PROBLEM

CORRECTIVE

ACTION

No pox_er.

* Make sure the AC cord is connected to an AC outlet.
• Make sure the pox_er is turned on.

No picture and sound.

* Make sure the AC cord is connected to an AC outlet.
• Check antenna connection.

No picture or poor picture on
TV/VCR.
No sound or poor sound.
Timer recording is not possible.

Cannot go into Record mode.

• Program TV channels into TV/VCR.
* Adjust direction or replace antenna.
* Adjust picture controls.
* Adjust volume control on remote control or main unit.
• Press the MUTE button to restore sound.
* Make sure the timer recording is set correctly.
• Make sure the pox_er is off.
• Make sure the TV/VCR clock is set correctly.
* Make sure the video tape has an erase-prevention tab in place. If the
tab has been removed, please cover the open space with tape.

Playback picture is partially noisy.

,*Adjust tracking control for a better picture using the CHANNEL A
or '!vbutton on the TV/VCR.

No picture but the audio is OK t\_r
tape playback.
No operation by infiared Remote
Control.

* Head cleaning may be necessary. Refer to "AUTO HEAD
CLEANING" on page 25.
,*Make sure the AC cord is connected to an AC outlet.
,*Check batteries in remote control.

Video or color fades in and out
when making a copy of a video tape.

,*You can not copy a copyrighted video tape. You are experiencing
copy guard protection.

Different color marks on screen.

,* Magnetism from nearby appliances or unshielded stereo speakers or
geomagnetisln might affect the color of the TV picture. Refer to
"DEGAUSSING" on page 14.

CLOSED CAPTION

PROBLEM

My TV/VCR is shinning captions
that are misspelled,

My TV/VCR will not show the text
in its entirety or there is a delay of
what is being said.

My captions are scrambled with
white boxes on the TV screen,
My program guide listed a TV show
as being closed captioned but none
of the captions were displayed,
My prerecorded video tape does not
show any captions. The tape box
mentions it being closed captioned,
My TV screen shows a black box
on certain channels.

POSSIBLE

REMEDY

*You are watching a live broadcast and spelling errors made by the
closed captioning production company may pass through uncorrected.
A prerecorded pro_am will not show any misspelled words because
of the normal time available for editing the captions.
*Captions that are delayed a few seconds behind the actual dialogue
are comlnon for live broadcast. Most captioning production companies
can display a dialogue to a maximum of 220 words per minute. If a
dialogue exceeds that rate, selective editing is used to insure that the
captions remain up-to-date with the current TV screen dialogue.
*Interference caused by building, power lines, thunderstorms, etc.
may cause scrambled or incomplete captions to appear.
*Broadcasters may at times use a time compression process to speed
up the actual program so that additional advertising time can be
given. Since the decoder cannot read the compressed information,
captions will be lost.
*The video tape was either an illegal copy or the tape duplicating
company accidentally left out the captioning signals during the
copying process.
*You are in the TEXT mode. Select CAPTION mode to CAPTION
[OFF].

EN
9103

CRT :

13 or 19 inch in-line gun, 90 °
deflection tube
NTSC-M
Television system :
Closed caption system :§15.119/FCC
Video Heads :
Rotary four-head
1/2 inch
Tape width :
Tape speed
SP:
33.40mm/sec.
LP:
16.67mm/sec.
SLP :
11.12mm/sec.
Tuner channel
TV VHF Low:
#2-#6
#7--#13
TV VHF High
TV UHF :
#14 #69
CATV
VHF :
5A
MID band :
A5 A1, A I
SUPER band :
JW
HYPER band :
W+I W+84
FM:
88- 108MHz (13" only)
Terminals
VHF/UHF 75 ohms
Antenna input
unbalanced
RCA connector X 1
Video input :
RCA connector X 1
Audio input :
Earphone :
1/8" monaural (3.5 mm)

CABLE

Video input level :
Audio input level :
Video S/N ratio :
Audio S/N ratio :

[ 13 inch model ]
Power requirement :
Power consumption :
Dimensions :

Weight :
[ 19 inch model ]
Power requirement :
Power consumption :
Dimensions :

Weight :
* Designs
without
* If there
default

CHANNEL

0.5- 2.0Vp-p
-15dBs
More than 46dB
More than 43dB

AC 120V/60Hz
60W
H:15-5/16" (389mm)
W: 14-7/16" (367mm)
D: 14-7/8" (377mm)
23.1 lbs (10.5kg)
AC 120V/60Hz
80W
H:19-7/16" (493mm)
W: 19-5/16" (491 ram)
D:18-11/16" (475mm)
43.0 lbs (19.5kg)

and specifications are subject to change
notice and without our legal obligation.
is a discrepancy between languages, the
language will be English.

DES GNAT ©NS

If you subscribe to cable TV, the channels are displayed as 1-125. Cable companies often designate channels
with letters or letter-number
combinations.
Please check with your local cable company. The following is a
chart of common cable channel designations.
CATVchanneI 5A
TVDisplay

CATVchannel C
TVDisplay

CATVchannel R
TVDisplay

W+I

W+2

W+3

W+4

W+5

W+6

W+7

W+8

W+9

CATVchannelW+10 W+11 W+12 W+13 W+14 W+15 W+16 W+17 W+18 W+19 W+20 W+21 W+22 W+23 W+24
TVDisplay

CATVchannel W+25
TV Display

CATVchannel W+40
TV Display

CATVchannel W+55
TV Display

CATVchannel W+65
TV Display

106

CATVchannel W+80
TV Display

121

W+26 W+27 W+28 W+29 W+30 W+31 W+32 W+33 W+34 W+35 W+36 W+37 W+38 W+39
62

W+41 W+42 W+43 W+44 W+45 W+46 W+47 W+48 W+49 W+50 W+51 W+52 W+53 W+54
77

W+56 W+57 W+58 A-5
92

A-4

A-3

A-2

A-1

W+59 W+60 W+61 W+62 W+63 W+64
100

101

102

103

104

105

W+66 W+67 W+68 W+69 W+70 W+71 W+72 W+73 W+74 W+75 W+76 W+77 W+78 W+79
107

108

109

110

11!

112

113

114

1!5

1!6

1!7

1!8

1!9

120

W+81 W+82 W+83 W+84
122

123

124

125

- 27 -

EN
9103

Este manual
sirve para
los manual
modelos sedemuestra
13" y 19".
A excepcidn
tamente
la misma.
En este
el modelo
de 13".de la aparieneia, la operacidn de los dos modelos es exac-

NOTA:
No recomendamos utilizar mandos a distancia universales. No todas las fhnciones pueden ser controladas mediante un
mando a distaneia universal. Si decide utilizar un mando a distancia unix ersal con esta unidad, tenga en cuenta que con el
n6mero de cddigo dado tal xez no se pueda controlar la unidad. En este caso, pdngase en contacto con el fabricante del
mando a distancia universal.

- PANEL DELANTERO

,bbb_

OO000OOOOO
O0000OO000
,_UtJU_UU
O0000OO000
O000OO0000
OOOO00OO00
OO0000000

...................
.............
....

OOO00OO
OOOOOOOy
ooooooo

ooooooo/
(

_0_o

r,_r_

,o_

_,,_

_,o_

---25
.............
26
CHANNEL
RETURN

............
24
........

.........

_10
PAUSE_STILL

.......
22
SLOW

<,_@

O_OOO

OOOOC

........
/ )

opooo_

7 891011

12 1314

• P{llselo para seleccionar los modos de ajuste
des& el men{lde la pantalla.
• P{llselo para introducir digitos cuando establezca un programa.
(Por ejemplo: Para ajustar el reloj o establecer un
plograma de temporizador)

................

*r_._.

7 Botdn v-

.........
23

SPEED

_r_

4 Botones
de volumen
(VOLUME A/V)Ajustan el nivel del vohmen.
S Botones de canales (CHANNEL A/V)Pt'llselos para seleccionar los canales deseados para
ver o grabar.
Se puede mostrar el ment'l principal en la pantalla del
televisor pulsando repetidamente este botdn del televisor/video_abadora.
Funci6n
de seguimientoPulse los botones
para minimizar el ruido de video (lineas o puntos en
la pantalla) durante la reproduccidn.
6 Ventanilla
sensora
del mando a distanciaRecibe las sefiales infrarrojas plocedentes
del
mando a distancia.

WAKE-UP
/SLEEP

•

,_,o

__J_J

REMOTO-

RECORD

r._

__
1 2

, r_,

11
1

]

OOOOOOO0

-CONTROL

OOOO00OOOC
OOQOOOOOOC
O00000C
OOOOO000OC
O00000000C
OOOOOOOOOC
O00000OOC

.........
21
........

[ Tdevisor/videograbadora
]
Bot6n de parada/expulsi6n
(STOP/EJECT)Pfllselo para detener la cinta. Pfllselo en el modo
de parada para expulsar la cinta del
televisor/videograbadora.

SYLVANIA

[ Control

1 Toma de entrada de video (VIDEO)Con&tela a la toma de salida de video de su
videoc,'imara u otra video_abadora.

remoto

]

Botdn de parada (STOP)- P{llselo para &tener la cinta.
8 Botdn de rebobinado
(REW)P£11selo para
rebobinar la cinta, o para ver la imagen en retroceso
r@ido durante el modo de reproduccidn. (B%queda
con rebobinado)
Botdn _-

2 Toma de entrada de audio (AUDIO)Con&tela a la toma de salida de audio de su equipo
de audio, videocfimara u otra video_abadora.
3 Botdn de la alimentaci6n
(POWER)Pt'_lselo
para encender y apagar el televisor/video_abadora.
Pfllselo para activar la _abacidn con temporizador.

• Pt'flselo para seleccionar
particular.
(Por ejemplo:
28

IDIOMA

un modo des& un ment'l

o ADJUST

DE USER)
ES
0129

- PANEL

TRASERO

G
®

28
9 Botdn de reproduccidn
iniciar la reproduccidn.
Botdn A-

(PLAY)-

16 Bot6n de ment_ (MENU)- PNselo para visualizar el mem'lprincipal en la pantalla del televisor.
17 Botdn del visualizador
(DISPLAY)-Visualiza
el contador o el nfimero del canal actual y la hora
actual en la pantalla del televisor.
18 Botdn de velocidad
de cinta (SPEED)Pt'dselo para elegir la velocidad de grabacidn deseada: SP/SLP.

PNselo para

° Pt'dselo para seleccionar los modos de ajuste
desde el menfi de la pantalla.
• Pfilselo para introducir digitos cuando establezca
un prouama.
(Por ejemplo: Para ajustar el reloj o establecer un
prouama de temporizador)
10 Botdn de avance
r_pido (F.FWD)- Pt'dselo
para avanzar r@idamente la cinta, o para ver la
imagen en avance rfipido durante el modo de reproduccidn. (Bfisqueda con avance rfipido)
Botdn I_-

19 Bot6n T-PROG. CLEAR- Pt'dselo para cancelar
tin pro_ama de temporizador.
Botdn de reposicidn
del contador
(COUNTER RESET)- Pt'dselo para reponer el
contador a 0:00:00.

• Cuando establezca un programa (por ejemplo: para
ajustar el reloj o para establecer un programa de
temporizador), pidselo para detenninar su eleccidn
y vaya al paso siguiente qne quiera introdncir.
• Pt'dselo para determinar los modos de ajuste
desde el mem'lde la pantalla.
• Pt'dselo para seleccionar un modo desde un
mem'_particular.
(Por ejemplo: IDIOMA o ADJUST DE USER)
11 Bot6n de grabaci6n
(REC)- Pt'dselo para iniciar la grabacidn manual.
Botdn de grabacidn
de un toque (OTR)Activa la _abacidn de tin toque. (Sdlo en el televisor/videouabadora)
12 Indicador
de grabacidn
(RECORD)Parpadea
durante la uabacidn.
Se enciende en el modo de espera de la grabacidn
con temporizador.
13 Toma de auriculares
(EARPHONE)Para
conectar los auriculares (no suministrados) y
escuchar en privado. La toma es mono y tiene tin
tamafio de I/8"(3.5 ram).
14 Compartimiento
del videocasete
15 Botones numeradosPNselos para seleccionar
los canales deseados para ver o grabar. Para seleccionar canales del i al 9, pulse primero el botdn 0 y
luego el botdn 1 a 9.
Bot6n +100- Cuando seleccione canales de tele-

20 Botdn de juego (GAME)- Establece el modo del
juego y el modo de entrada externa al mismo tiempo.
21 Botdn de c&mera lenta (SLOW)- Pulselo para
activar la reproduccidn a ci_mera lenta.
22 Botdn de pausa/imagen
fija (PAUSE/STILL)Pfdselo para detener temporalmente
la cinta durante
la grabacidn o para ver una imagen fija durante la
reproduccidn.
23 Botdn de silenciamiento
(MUTE)- Silencia el
sonido. Pfilselo de nuevo para recuperar el sonido.
24 Botdn de retorno de canal (CHANNEL
RETURN)PNselo para volver al canal anterior.
Por ejemplo, pulsando una vez este botdn, la visualizacidn del canal cambiarfi de 3 (canal actual) a 10
(canal anterior), y al pulsarlo por segunda vez, el
canal cambiarfi del 10 al 3.
25 Botdn del temporizador
despertadorlpara
dormir (WAKE-UP/SLEEP)Ajusta el temporizador para despertarse/dormir.
26 (13" model) Botdn de televisorlmodulacidn
de frecuen-cia
(TV/FM) - Establece el modo
FM.
(19" model) Botdn de explusidn
(EJECT)Pfdselo para expulsar la cinta del
televisor/video_abadora.

27 Terminal

de antena

(ANT.)- Para conectar una

antena o sistema de televisidn

28 Corddn

de alimentaci6n-

por cable.

Condctelo a la toma

de CA estfindar (120V/60Hz).

visidn por cable cuyo nfimero sea superior al 99,
pulse primero este botdn, y luego pulse los dos filtimos digitos. (Para seleccionar el canal i25, pulse
primero el botdn "+i00" y luego el "2" y el "5".)
- 29 -

ES
0129

Desde
Caja de CATV
o caja de emisiones via satdlite
(no incluido)

el cable

coaxial

o
Antena

caja de emisiones via
satdlite de 75 ohm del

_
Antena de varilla UHF VHF

combinada

VHF UHF
(no incluido)

(incluido para solamente lo")
Antena VHF
(no incluido)

Antena UHF
(no incluido)

Des& el
sistema de (?able

Cable coaxial
de 75 ohm (no incluido)

Combinador de
VHF UHF
(11oincluido)

=@=
ANT

Cable bifilar plano

2 Se< _;< < oAN:G(JA(}_{:/
Pulse el botdn MENU en el mando
a distancia,
Pulse el botdn PLAY/A o STOP/_"
pars sefialar "LANGUAGE".

Cuando utilice una serial de entrada externa (otra
video_abadora
o una videocfimara), conecte los cables
de salida de audio/video del equipo de reproduccidn a
las tomas AUDIO IN/VIDEO IN de su
televisor/video_abadora.
Y luego pulse el botdn
CHANNEL ,t o T hasta que "AUX" aparezca en la
pantalla.
Usted puede programar el temporizador para que explore
todos los canales que puedan recibirse en su zona.

M_o
..............
u_ ......
v CHIP SET 'P
....... _o< ,
..........
TIMER

pROGP4_MMING

SETTING
CHANNEL

CLOCK
SET UP

LANGUAG_
ZER©

INDEX

[ENqL

SH]

RETURN

_ Select oHe _'ENGLISH",_ESPANOC'0 _F'RANgAIS"
Seleccione "ENGLISH", "ESPANOL" o
"FRAN(_AIS '' con e! botdn F.FWD/_ y pulse el
botdn REW/-_ en el mando a distancia.
Sa@s(Se _ odod<_ do a
Pulse el botdn ME_; en el msndo a distancis pars
volver al modo de! televisor.

;

NOTA: Si, por alguna razdn, el men_5estfi cn espafiol
o fi:anc_s, pulse el botdn ME_; en el mando a distancia, pulse el botdn PLAY/_ pars sefialar el
"IDIOMA (ESPANOL)" o "LANGAGE
(FRAN_AIS)", a continuacidn, pulse el botdn
F.FWD/_ y pulse el botdn MEN[; en el mando a
distancia.

Enchufe el corddn de alimentacidn del
televisor/videograbadora en una toms de
CA estfindar.
NOTA:
* Si aparecen algunas cifras en la esquina
de la pantalla, pulse el botdn POWER sin descnchut;ar el corddn de alimentacidn.
Asegiirese de que ...
* Pulse el botdn POWER pars encender el televisor/videograbadora.
NOTA: Esta fi_mci6nafecta s61o el idioms en el
men_5de la pantalla y no la fuente de audio.

ES
0129

Puede programar el sintonizador para buscar todos
los canales que recibe en su localidad.
NOTA: E1 canal preparado NO es necesario cuando
est4 conectado a una caja de cable o caia de sat41ite.
$61o tiene que seleccionar con el selector de canal
del televisor/video_abadora
al canal de salida de la
caia de cabe o caia de sat4lite (por ejemplo el cana!
CH3). Seleccione el canal aver en la caja de cable o
caja de sat41ite.

('ercidrese...
* La alimentacidn del televisor/videograbadora
deberfi estar conectada.

Aseg_rese de que ...
* Pulse el botdn POWER para encender el televisor/videograbadora.

Luego, pulse el botdn F.FWD/_.
2) Pulse el botdn PLAY/A o STOP/_" para indJcar
"AJUSTE MANUAL RELOJ".

"[ Seecco

e A#!,Sf'EDE

En el ejemplo de ahajo, el reloj va a q/_¢starse ash
FECHA: 6 de mayo de 2004
HORA: 5:40 PM
1)Pulse el botdn ME_; en el mando a distancia.
Pulse el botdn PLAY/A o STOP/_" para indJcar
"AJUSTE RELOJ".

©A/_,_A/i

Pulse el botdn MENU en el mando
a di stanc i a.
Pusee
1
! b ot6n PLAY/A oe l b ot6n
STOP/T para serialar 'AJUSTE DE
CANAL".
A continuaci6n, pulse el bot6n
F.FWD/_.

_
....
/ ...............
............
| ..............
{ _,_oEo<;_'_a°L_
{ .............
BUSCA HACIA ND_CE
CONTROL
DE {MAGEN
AJUSTE
RELOJ

A JUSTE

RETORNO

DE V CHIP

A CERO

Empece÷
;>'el a;oa_xtomStco
Pulse el botdn PLAY/A o STOP/T
.............
para serialar "AUTOPROGRAMA_............ _°_,,_
CION DE CA".
.....................
A continuaci6n, pulse el botdn
F.FWD_.-.
E1 sintonizador busca y memoriza todos los canales
activos en su localidad.

Luego, pulse el botdn F.FWD/_.
3)Pulse el botdn PLAY/A o STOP?_' hasta que
aparezca el rues deseado. (Ejemplo: Mayo - 05)
Luego, pulse el botdn F.FWD/_.
4)Pulse el botdn PLAY/A o STOP/T hasta que
aparezca el dia del rues deseado. (Ejemplo: 6 - 06)
Luego, pulse el botdn F.FWD/_.
5)Pulse el botdn PLAY/A o STOP/T hasta que
aparezca el ario deseado. (Ejemplo: 2004)
Luego, pulse el botdn F.FWD/mD_.
6)Pulse el botdn PLAY/A o STOP/T hasta clue
aparezca la hora &sea&. (Ejemplo: 5, PM)
Luego, pulse el botdn F.FWD/_.
7)Pulse el botdn PLAY/A o STOP/T hasta que
aparezca el minuto deseado. (Ejemplo: 40)
8) Pulse el botdn MENU en el mando a dJstancia.
Aunque los segundos no se visualizan, 4stos
empiezan a contar desde 00 cuando se pulsa
MEN_/en el mando a dJstancia. Utilice esta funci6n para sincronizar el reloj con la hora correcta.

{_ ©esp<6s de b _sca_
_
E1 sintonizador se detiene en el canal memofizado
mils bajo.
* Cuando se activa AUTOPROGRAMACION DE
CA, donde no hay entrada de serial del televisor,
aparecerit "NO HAY SENAL DE TV" en la pantalla despu4s de tenninar la bfisqueda de canales.
* E1 televisor/videograbadora puede reconocer los
canales de TV para clue scan canales de TV de
antena de cable con las condiciones de recepcidn.
En este caso, pmebe nuevamente con el prefijado
automfitico en las condiciones de recepci6n fina.

- 31 -

Your Home
For repairin your home
lawn and garden equipment,
no matter

who

-of all major brand appliances,
or heating and cooling systems,

made

it, no matter

For the replacement
owner's

manuals

parts,

sold

accessories

that you need

For Sears professional
and items like garage

who

it!

and

to do-it-yourself.

installation
of home appliances
door openers and water heaters.

1-800-4-MY-HOME

® (i-800-469-4663)

Call anytime, day or night(U.S.A,
www.sears.com

and Canada)

www.sears.ca

Our Home
For repair

of carry-in

and electronics,

items

like vacuums,

call or go on-line
Sears

Parts

lawn equipment,

for the location

& Repair

of your

nearest

Center.

1-800-488-1222
Call anytime, day or night (U.S.A. only)
www.sears.com

To purchase

a protection

1-800-827-6655

agreement

(U.S.A.)

Para pedir servicio de reparaci6n

on a product

by Sears:

1-800-361-6665

(Canada)

Au Canada pour service en franQais:

a domicitio, y para ordenar piezas:
1-888-SU-HOGAR
(1-888-784-6427)

serviced

1-800-LE-FOYER

(1-800-533-6937)
www.sears.ca

EARS
TM Trademark / SM Selvice Mark of Sears Roebuck and Co
¢ Registered Trademark
TM
SM
® Marca Registlada
'
Marca de Fabrica,
Marca de Servicio de Sears, Roebuck and Co
MC Marque de commerce
MDMarque dcpos_e de Sears¸ Roebuck and Co

LIMITED

90 DAY WARRANTY

FOR

CDSears

Roebuck

13 INCH MODEL

If this (product) experiences any failure due to a defect in material or workmanship
within
purchase, return it to your nearest Sears store, and it will be replaced free of charge.
This warranty
This warranty

and Co

90 days from the date of

applies only if this (product) is used for private household purposes.
gives you specific legal rights, and you may also have other rights which vary from state to state.
FULL 90 DAY WARRANTY

FOR 19 INCH MODEL

For 90 days from the date of purchase, Sears will repair any defect in material or workmanship
in this TV/VCR
combination,
free of charge. For one year from the date of purchase, Sears will supply, at no charge, replacement
for defective parts.
Two (2) years for Picture Tube. Certain parts are excluded from this warranty.
The above warranty coverage applies only to TV/VCR combination which are used for private household purposes.
TO OBTAIN WARRANTY
SERVICE, SIMPLY RETURN THE TV/VCR COMBINATION
TO THE NEAREST
SEARS
SERVICE CENTER IN THE UNITED STATES.
This warranty

gives you specific

legal rights, and you may also have other

rights which vary from state to state.

Sears Roebuck and Co., Dept. 817WA Hoffman Estates, IL 60179
For the location of a Sears Service Center in your area : 1-800-488-1222
Printed in Malaysia

0EMN02407
T5505UF/T7505UF _--k_

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 32
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Fri Apr 06 00:37:26 2007
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

SYLVANIA TV/VCR Or DVD Combo Manual L0605428

Navigation menu

Versions of this User Manual:

Views

Navigation