SYLVANIA TV/VCR Or DVD Combo Manual L0610693

User Manual: SYLVANIA SYLVANIA TV/VCR or DVD Combo Manual SYLVANIA TV/VCR or DVD Combo Owner's Manual, SYLVANIA TV/VCR or DVD Combo installation guides

Open the PDF directly: View PDF .
Page Count: 32

Download
Open PDF In Browser	View PDF

\
\

\
\
\
\

\
\
\

\
\
\i

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A
RISK OF ELECTRIC SHOCK IS PRESENT
WITHIN THIS UNIT,
THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE
APPLIANCE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The cantion marking is located oi1the rear of the cabinet.

IMPORTANT

SAFEGUARDS

l.Read instructions-All the salety and operatiug instructions
should be read belore the appliance is operated.

AMEUBLES- Cet appareil ne doit _tre *_o_o_,,_o_
LESC_MpoSaNTES
plac6 clue sur un meuble (avec ou sans
roulettes) recommand_ par le fabricant.
Si vous l'installez sur tul meuble 5
roulettes, d@lacez les deux ensembles
avec pr&aution. Un an'at brusque, l'utilisation d'une force excessive et des surhtces il'r_guli_res
risquent de d&tabiliser l'ensemble et de le renverser.
APPAREIL

2.Retain lnstrucfions-The safety and operating iustructions
should be retained for future reference.
3.Heed Warnings-All warniugs on the appliance and iu the
operating instructions should be adhered to.
4.Follow Instructions-All
should be followed.

operating and use instructions

MEUgLE

A ROO£E_ES

9, Ventilation-Slots and openings in the cabinet and the back
or bottom are provided for ventilation and to ensure reliable
operation of the TV/VCR and to protect it from overheating, and these openings must not be blocked or covered.
The openings should never be blocked by placing the
TV/VCR on a bed, sofa, rag, or other similar sudace. This
TV/VCR should never be placed near or over a radiator or
heat register. This TV/VCR should not be placed in a builtin installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer's instructions
have been adhered to.

5.Cleaning-Unplug TV/VCR lrom the wall outlet belbre
cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
EXCEPTION: A product that is meant lbr uninterrupted
service and, that lot some specific reason, such as the possibility of the loss of an authorization code IL,I"a CATV converier, is not iutended to be unplugged by the user lot cleaning or any other purpose, may exclude the ret)rence to
unpluggiug the appliance iu the cleaning description otherwise required in item 5.
6.Attachments-Do not use attachments not recommended by
the TV/VCR manufacturer as they may cause hazards.

Ill.Power Sources-This TV/VCR should be operated only
from the type of power source indicated on the marking
label. If you are not sure ol the type ol power supply to
your home, consult your appliance dealer or local power
company. For TV/VCRs intended to operate ll"om battery
power, or other sources, refer to the operating instructions.

7.Water and Moisture-Do not use this TV/VCR near waterfor example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool,
and the like.

ll.Grounding or Polarization-This TV/VCR is equipped
with a polarized alternating-current line plug(a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a salety leature. If you
are unable to insert the plug lully into the outlet, try reverslug the plug. II the plug should still Failto fit, contact your
electrician to replace your obsolete outlet. Do not deteat the
salety purpose of the polarized plug.

KAccessories-Do not place this TV/VCR on an unstable cart,
stand, tripod, bracket, or table. The TV/VCR may fan, causing serious injury to someone, aud serious damage to the
appliance. Use only with a cart, stand, tripod, brackeL or
table recommended by the manufacturer, or sold with the
TV/VCR. Any mounting of the
PORTABLE
CART WARNING
appliance should follow the manufacturer's instructions and should
use a mounting accessory recommended by the manufacturer. An
appliance and cart combination
should be moved with care.
Quick stops, excessive force, and
uneven surhlces may cause the
appliance and cart combiuation to

12.Power-Cord Protecfion-Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles,
and the point where they exit lrom the appliance.

overturn.

- 2-

EN
9103

FIGURE
EXAMPLE

OF ANTENNA

NATIONAL

A
GROUNDING

ELECTRICAL

AS PER

CODE
LEAD
WIRE

GROUND

. ANTENNA
DISCHARGE
UNIT
(NED SECTION 810-20)

ELECTRIC
SERVICE
GROUNDING

CONDUCTORS

INEC SECTION

810-21)

GROUNDCLAMPS

NEC- NATIONAL ELECTRICAL CODE

POWER SERVICE GROUNDING
ELECTRODE
SYSTEM

_:.,dlr_

$2898A

(NEC

13.Outdoor
Antenna grounding-If an outside antenna or
cable system is connected to the TV/VCR, be sure the

19.Damage

for this TV/VCR

Lines-An

outside antenna

Service-Unplug

this TV/VCR

c. If the TV/VCR

has been exposed

from

service per-

cord or plug is dan:aged

b. If liquid has been spilled, or objects
TV/VCR.

or frayed.

have fallen into the

to rain or water.

d. If the TV/VCR does not operate normally by following the
operating instructions. Adjust only those controls that ale
covered by the operating instructions, as improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore
the TV/VCR to its uom:al operation.

receiver

during a lightning storm, or whet: it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the TV/VCR due to lightning and
power-line surges.
15.Po_er

Requiring

a. When the power-supply

proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and requirements
for the grounding electrode. (Fig. A)
added protection

PART R)

the wall outlet and refer servicing to qualified
sonnel under the following conditions:

antenna or cable system is grounded so as to provide some
protection against voltage su:_.es and built-up static
charges. Article 810 of the National Electrical Code,
ANSI/NFPA No. 70, provides information with respect to

14.Lightning-For

ART 250,

e. If the TV/VCR

has been dropped

or dmnaged

in any way.

f. When the TV/VCR exhibits a distinct change in performance-this indicates a need tiar service.

system should not be

20.Replacement

located in the vicinity of overhead power lines or other
electlic light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with the:::

Parts-When

replacement

parts are required,

be sure the service technician has used replacement parts
specified by the manufacturer
that have the same characteristics as the original part. Unauthorized substitutions
may
result in fire, electric shock, injury to persons or other hazards.

might be fatal.

21.Safety

16.Overloading-Do
not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.

Check-Upon

completion

of any service

or repairs to

this TV/VCR, ask the service technician to perform routine
safety checks to determine that the TV/VCR is in proper
operating condition.

17.Object and Liquid Entry-Never
push objects of any kind
into this TV/VCR through openings as they may touch dangerous voltage points or short out parts that could result in

22.Heat-This
TV/VCR product should be situated away from
heat sources such as radiators, heat registers, stoves, or

a fire or electric shock. Never spill liquid of any kind on
the TV/VCR.

other products

(including

amplifiers)

that produce heat.

18.Servicing-Do
not attempt to service this TV/VCR yourself
as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WiDE BLADE OF PLUG TO WiDE SLOT, FULLY
INSERT.
ATTENTION: POUR E_VITER LES CHOC I_LECTRiQUES, INTRODUIRE LA LAME LA PLUS LARGE DE
LA FICHE DANS LA BORNE CORRESPONDANTE
DE LA PRISE ET POUSSER JUSQU'AU FOND.

- 3-

EN
9103

IMPORTANT
For safe operation and satisfactory
performance
of
your TV/VCR, keep the following in mind when
selecting a place for its installation:
,, Shield it from direct sunlight and keep it away
from sources of intense heat.
,, Avoid dusty or humid

unit in a horizontal

FCC WARNINGThis equipment may generate or use radio frequency
energy. Changes or
modifications
to this equipment
may cause
harmful
interference
unless the modifications
are expressly approved
in the instruction
manual. The user could lose the authority
to operate this equipment
if an unauthorized
change
or modification
is made.

position.

,, Avoid locations subject to strong vibration.
,, Do not place the TV/VCR near strong magnetic fields.
,, Avoid moving TV/VCR to locations
amre differences are extreme.

where temper-

This eqtfipment has been tested mid found to comply with the limits for a Class B digital device, pursutmt to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and cm3radiate
radio frequency energy and, if not installed mid
used in accordance with the instructions, may cause
harmful interference to radio communications.

,, Do not handle the power cord with wet hands.
,, Do not pull on the power cord when disconnecting
it from tm AC wall outlet. Grasp it by the plug.
,, If, by accident, water is spilled on your unit, unplug
the power cord immediately
trod take the unit to an
Authorized
Service Center for servicing.
,, Do not put your fingers or objects into the
TV/VCR cassette holder.
,, Do not place tmything

INFORMATION

places.

,, Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes
at the top and bottom of the unit. Do not place the
unit on a carpet because this will block the ventilation holes.
,, Install

Unauthorized
recording or use of broadcast television programming,
video tape, fihn or other copyrighted material may violate applicable copyright
laws. We assume no responsibility
for the unauthorized duplication, use, or other acts which infringe
upon the rights of copyright owners.

directly

However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment
and receiver.

on top of the unit.

Moisture condensation
may occur inside the unit
when it is moved from a cold place to a warm place,
or after heating a cokl room or under conditions of
high humidity. If a tape is played in a TV/VCR
which has moisture, it may damage the tape and
TV/VCR. Therefore if condensation
occurs inside the
unit, tuna the POWER button on and allow at least 2
hours for the unit to dry out.

3) Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV
technician for help.

The serial number of this product may be found on the back of the unit. No other TV/VCR has the same serial
number as yours. You should record the number and other vital infommtion here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
- 4 -

EN
9103

TABLE OF CONTEN FS
[] IMPORTANT

SAFEGUARDS

[] PRECAUTIONS
[] FEATURES

.............

........................

............................

[] SUPPLIED

ACCESSORIES

[] OPERATING

CONTROLS

...............
AND FUNCTIONS

[] PREPARATION" FOR USE ................
ANTENNA/CABLE
CONNECTIONS
EXTERNAL INPUT MODE ..............

.......

OTR (One Touch Recording) ..............
TIMER RECORDING ...................

21
21

TIMER PROGRAM EXTENSION

HINTS FOR AUTOMATIC TIMER
RECORDING
.........................

AUTO RETURN

9
10
10

[] SET UP FOR USE .....................
CHANNEL SET UP FOR THE FIRST TIME

10
.10

......

11
12

DELETING (OR ADDING) CHANNEL .....
SELECTING THE LANGUAGE ...........

12
13

DAYLIGHT-SAVING TIME

[] TV OPERATION

..............

.......................

WATCHING A TV PROGRAM

14
............

SLEEP TIMER .........................

[] COPYING A VIDEO TAPE ...............

[] ON SCREEN DISPLAY

AUTO REWIND-EJECT
[] MAINTENANCE

15
17

AUTO REPEAT PLAYBACK

.............

.............................

SLOW MOTION

.....................
DESIGNATIONS

27
......

Back Cover

19
19

VERTICAL HOLD CONTROL

............

STILL PICTURE .......................

TRACKING ADJUSTMENT

2(I

ABOUT

...................

.......................

RENTAL PLAYBACK ...................

A NOTE

...........

NORMAL PLAYBACK ..................
SEARCH

GUIDE

FM MODE ............................
...........................

V-CHIP SET UP ........................

[] PLAYBACK

.................

[] SPECIFICATIONS

[] WARRANTY

............

.......................

[] TROUBLESHOOTING

14
............

..................

REAL TIME TAPE COUNTER

DEGAUSSING

CLOSED CAPTION SYSTEM

.................

[] SPECIAL FEATURES

[] CABLE CHANNEL

...................

.......................

........................

.........

WAKE UP TIMER ......................

GAME MODE .........................
PICTURE CONTROL

20
20

INSTALLING THE BATTERIES ...........

CLOCK SET UP (AUTO / MANUAL)
CHANNEL SET UP AGAIN ..............

[] RECORDING
.........................
NORMAL RECORDING .................

..............

RECYCLING

This product's packaging
materials are recyclable and ctm be reused. Please dispose
accordtmce with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accor&mce
tions concerning chemical wastes.

-5-

of any materials

with your local regula-

EN
9103

,, Rotary 4-head Record/Playback System-Four
heads ensure excellent picture quality trod special
effects playback.
• Index Search-Fast-A_rwards
to start of next recording.
• Slow Motion-View
recorded program at slower
thtm normal speed.
• Infrared remote control

,, Auto Head Cleaner-Automatically
cleans video
heads as you insert or remove a cassette.
= Zero Return-The tape returns to counter of
0:00:00 by rewinding or fast forwarding.
• Still-"Freeze"
the picture at any time, for close
viewing of a particular scene. Only tapes recorded
in SLP mode will show a fairly clear picture.
• Digital Auto Tracking (DTR)-Automatically
adjusts the tracking for each tape you play.
• Rental play mode-Improves
playback picture
quality from wom tapes, such as rental tapes.
,, Auto repeat-Allows
you to repeat the playing of a
tape indefinitely
without pressing the PLAY button.
,, Time search-Lets
you set the TV/VCR to advance
the tape by entering the desired playback time you
want to skip.
,, OTR (One Touch Recording)-Instant
timed
recording from 30 to 480 minutes is possible at the
push of the REC/OTR button.
• 1 Year, 8 events (including Daily and Weekly
Timer Recording)-The built-in timer allows you to
record up to 8 programs at different times on different channels up to 1 year in advance. The Daily
timer allows recordings to be made of daily broadcasts, mad the Weekly timer allows recording to be
made once a week up to the end of the tape.
• Auto return-After
timer recording is finished, the
TV/VCR can retum to the begiuniug of the recordlug.
,, Wake-up/Sleep
timer-Allows
you to have the
TV/VCR automatically
tuna on or off at a desired
time.

• Bilingual on screen menu display selectable in
English or Spanish
,, Real time counter-This
shows the elapsed recordlug or playback time in hours, minutes, trod seconds. The "-" indication will appear when the tape
is rewound further than the tape counter position
"0:00:00".
,, 181 channel capability PLL frequency synthesizer tuner with direct station call-(A converter may
be necessary to view scrambled cable channels.)
,, Auto Clock Setting-Allows
you to set the clock
from a PBS broadcast station.
,, Closed caption system-You
may view specially
labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or
text display added to the program.
,, Game mode-Automatically
sets exterual input
mode and allows the TV/VCR display to be suitable for use with TV games.
,, Auto power on and off system-Automatically
turns on the TV/VCR when you insert the cassette,
turns off after auto-rewind,
trod ejects when the
beginning of the tape is reached.
• Auto rewind when the end of a tape is
reached-This
function doesn't occur when using
timer recording.
,, 2 Step picture search operation-You
can view a
video program at a high speed or super high speed
in either a forward or reverse direction in LP and
SLP mode. For SP mode only high speed.
• Three different playback tape speeds : SP/LP/SLP
• Two different recording tape speeds : SP/SLP

SUPPL ED
Remote

Control

Unit

PA TNO ;1

,, Timer Program Extension-Allow
you to shift the
time schedule for automatic timer recording.
,, V-CHIP-Enables
parents to prevent their children
from watching inappropriate
material on TV.
• FM mode-Allows
you to listen to the FM radio.

ACCESSORIES
2 AA Batteries

• If you need to replace these accessories,
968-3429.

Rod Antenna

(13" model

only)

]

PA TNO
0 MN006
iI

0EMN01599

or0EMN01755)

please refer to the PART NO. under the illustrations

trod call 1-800-

• Depending on your antenna system, you may need different types of Combiners (Mixer) or Separators
(Splitter). Contact your local electronics store for these items.
,, We do not recommend
the use of universal remote controls. Not all of the functions may be controlled with
a universal remote control. If you decide to use a universal remote control with this unit, please be aware
that the code number given may not operate this unit. In this case, please call the manufacturer
of the universal remote control.
- 6 -

EN
9103

OPERATING
This
manual
ppearance.
-TV/VCR

CONTROI S

AND FUNCTIONS

covers
13" isand
19". Thein operation
19"
model
illustrated
this manual.of the two models

FRONT

are exactly

the same

except

th 4

PANEL -

1 2

3 4

5 6 78910111213

- REMOTE CONTROL 1 VIDEO input jack- Connect to the video output
jack of your video camera or tmother VCR.

...............
25

2 AUDIO input jack- Connect
jack of your audio equipment,
another VCR.

,,,,,,,,,,,,,26

..........

_CZp C_

O._

15 ..........

CD CD _
"OG@_

DISPLAY

MUTE

_
(_

16 ........

RECORD

•

SPEED

,,,,,,,,,,,24

3 POWER button- Press to turn TV/VCR
off. Press to activate timer recording.

--5

4 VOLUME A / V buttonsAdjust the volume level.
5 CHANNEL A / V buttonsPress to select the
desired channels
of FM radio.

,,,,,,,,,,,,,
23
9
,,,,o,,,,,,
10

You may display the main menu on tile TV screen
by pressing repeatedly this button on the TV/VCR.
TRACKING functionPress to minimize video

or recording,

listening

'noise' (lines or dots on screen) during playback or
Slow mode. (See page 2(I.)
6 Remote Sensor Window- Receives the infrared

PAUSDSTILL

slow

for viewing

oll trod

--4

*..O ;_;;_TCD @ .... ,,,-,22
........................
_LEAR(NN)

to the audio output
video camera or

,,,,,,
21

signals

from the remote

7 STOP button-

control.

Press to stop the tape motion.

EJECT button- Press in the Stop mode to remove
tape from TV/VCR.
_" button-

.........

,, Press to select setting modes
menu.

from the on screen

® Press to enter digits when setting program.
(for example: setting clock or timer program)
8 REW button- Press to rewind the tape, or to view
the picture rapidly in reverse during playback
mode. (Rewind Search)
button,, Press to select a mode from a pallicular
(for example: LANGUAGE
or USER'S

- 7 -

menu.
SET UP)

EN
9103

- REAR VIEW -*

27
9 PLAY button• button-

18 SPEED button-

Press to begin playback.

recording

IllelllJ.

,, Press to enter digits when setting program
(for example: setting clock or timer program)

21 SLOW button-

picture one frame at a time during

setting modes from on screen

Press for manual

OTR button- Activates
(only on the TV/VCR)

23 MUTE buttonresume sound.

menu.
SET UP)

Mutes the

Still mode.

sound. Press it again to

24 CHANNEL RETURN button- Press to go back to
the previously viewed chmmel. For example,
pressing this button once will ch_mge ch_mnel display from 3 (present channel) to 10 (previously
viewed ch_mnel), and pressing it a second time
will return from 10 to 3.

recording.

One Touch Recording.

12 RECORD indicatorFlashes during recording.
Lights up in the Stand-by mode for Timer Recording.
13 EARPHONE jack- Connects to earphones (not
supplied) for personal listening. The size of jack is
1/8" monaural (3.5ram).

25 WAKE UP/SLEEP button- Sets the Wake up or
Sleep Timer. (See page 23 and 24.)
26 TV/FM button- Set the FM mode.
27 Power cord- Connect to a sttmdard AC outlet
(120V/60Hz).
28 ANT. terminalConnect to an antenna or cable

14 Cassette compartment
15 Number buttons- Press to select desired channels
for viewing or recording. To select channels from
1 to 9, first press the 0 button trod then 1 to 9.
+100 button-When
selecting cable channels which
are higher than 99, press this button first, then press
the last two digits. (To select channel 125, first press
the '% 100" button then press "2" and "5").
16 MENU buttonthe TV screen.

Press to start slow motion playback.

22 PAUSE/STILL button- Press to temporarily
stop
the tape during the recording or to view a still picture during playback.
Frame Advance functionPress to adwmce the

, When setting program (for example: setting clock
or timer program), press to determine your selection and proceed to the next step you want to input.

11 REC button-

speed:SP/SLR

20 GAME button- Sets the game mode _md external
input mode at the same time. (See page 14.)

10 F FWD button- Press to rapidly adwmce the tape,
or to view the picture rapkl]y in forward during
playback mode. (Forward Search)
I_ button-

,, Press to select a mode from a parlicular
(for example: LANGUAGE
or USER'S

Press to choose the desired

19 T-PROG. CLEAR buttonPress to cancel a setting
of timer program. (See page 23.)
COUNTER RESET button- Press to reset counter
to 0:00:00.

, Press to select setting modes from the on screen

• Press to determine
menu.

system.

Press to display the main menu on

17 DISPLAY button- Display the counter or the current channel number and current time on the TV
screen. (See page 25.)

- 8-

EN
9103

PRERhRAT ON

FOR USE

From Cable System or I
_
Satellite
box or _

batellite

Cable Box

[ _

Dish _
jp,

Cable Sysb m

_ (Supplied

II h _,r

with 13" model only)

I/ll llll

[
"_..--:_q?........._
75-ohm Coaxial

°r|

Cable (N°t supplied)

cl]q},_[

COM?_I/%WD

/
_
I

_
_"

[

UHF Antenna

(Not supplied)

VHFIUH_

/
/
l

Flat twin-lead cable

_SEI_4 RATE

A NTR/\"/%4S
to use tm outdoor

alltellna.

CAYLE
W17770U?
CONVERTER/
DESCRAMBLti'R
BOX
Use this connection if your cable system connects
directly to your TV/VCR without a converter box.
By using this connection you can:
1) Use the TV/VCR remote to select chtmnels.
2) Program one or more unscrambled
chtmnels flw
Automatic Timer Recording.
NOTE: This unit will ONLY record _md view the
same channel.
_H2

....
(,ONVLRZ

_,
I_R/

Y_OX OR SAX ELLITL

If your cable service supplies you with a converter
box or if you use a satellite system, you ctm use the
basic connection shown in the diagram.

pin)

By using this connection you ctm also record scrambled ch_mnels. However, channel selection must be
made with the converter box or satellite box. This
metros that channels ctmnot be changed using the
TV/VCR Remote Control. Unattended
timer recording is limited to one channel at a time.

NOTE:
of an indoor antenna
TV reception.

In some areas it will be necessary

Plug
(Straight

(Not supplied)

................................................................................
;

DA,NCRAMBL{:N

(Needs to be straightened)

!'] _J

--_:_"_

A/V2 E/\_WA

_'I-,

(,ABLA

system

Bent pin

Note to CATV

or Combiner
(Not supplied)
_q

Before plugging the Rod antenna into tmtenna terminal, check that the pin is not bent. If it is bent,
straighten the pin as illustrated, then plug the pin into
antenna terminal.

The connection
give acceptable

VHF/UHF Antenna
_Not su_lie@

VHF/UHF

The VHF/UHF Rod Antenna (supplied with 13"
model only) is detachable, hlsert the stem of the
antenna into the hole on the upper-back portion of
the TV/VCR.Connect
the VHF/UHF Rod Antenna or
VHF/UHF Combination
Antenna to the ANT. terminal of the TV/VCR as shown in the diagram. For the
best reception, fully extend the VHF/UHF Rod
Antenna and make the necessary adjustments.
(Avoid
touching the top section when adjusting.)
NOTE:

Cable

_
"

1111 2L _LI_IIII or_.

.......... ff I[

VHF/UHF

_
_ Rod Antenna

_,_./_/

I
From

may not always

installer:

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.
- 9 -

EN
9103

TORECORD
A SCRAMBLED/UNSCRAMBLED
CHANNEL
1) SettheTV/VCRchtmnel
selector
totheoutput
1)Open the battery compartment cover by pressing
chtumel
oftheCableConvener
BoxorSatellite
the cover on the remote unit in the direction of the
Box.(Example:
CH3)
arrow.
2)Select
thechtumel
torecordfromyourCable
2)Insert 2 "AA" penlight batteries into the battery
Converter
BoxorSatellite
Box.
comparlment in the direction indicated by the
polarity (+/-) markings.
3)Replace the cover.
When using an extemal input signal (another VCR or
video camera), connect the player's audio/video output cables to the AUDIO IN/VIDEO IN jacks of
your TV/VCR. Then press the CHANNEL • or •
button until "AUX" appears on the screen.
NOTE: "AUX" is found below the
lowest memorized channel.
AUX
(Example: CH2)

SET UP F©R USE
You can program the tuner to scan all the chtmnels you receive in your area.
NOTE: Chmmel memory programming is NOT needed when connected to a cable box or satellite box. Just
select the TV/VCR channel selector to the output ch_mnel of the cable box or satellite box (Ex CH3). Then
select the ch_mnel to be viewed on the Cable Box or Satellite Box.

Plug the TV/VCR power cord into a
standard AC outlet.

4 IBegb}auto prese_
Press the PLAY/• or STOP/• button to point to "AUTO PRESET".
Then press the EFWD/I_ button.
The tuner sctms and memorizes all
active channels in your area.
NOTES:

_-_

NOTE:
If some digits appear in the comer of
the screen, press the POWER button
without unplugging the power cord.

AUTO

ESPANO_

pRESET

The TV/VCR distinguishes between sttmdard TV
ch_mnels and cable ch_mnels.
If you want to play or record a video tape
BEFORE presetting the tuner, you must press the
MENU button on the remote control. To preset the
tuner again, see "CHANNEL SET UP AGAIN" on
page 12.
The TV/VCR may memorize TV charnels as
CATV channels if reception conditions are poor. If
this happens, try the AUTO MEMO action again
when reception conditions are better.

2 "_"umo_ the "W/'VCR
Press the POWER button to turn on the TV/VCR
Sek_ot'_E_/GUSW' oir 'E!!!SRA¢_OL"
Select "ENGLISH" or
....
ESPANOL =Span sh using the
...... A_
EFWD/_ or REW/'_I button. "[ 1"
indicate the selected language.
A........
[EN G L_SIq]

SET

LANGUAGE
[ENGLISH]

ES pAIq OL

5 After scav_i_g
The tuner stops on the lowest memorized channel.
If you wtmt to recall the selected chtmnels, you can
select the desired channel directly with the remote
control number buttons or CHANNEL • or •button.

EN
9103

T(2 SELECT

A D£'SH?ED

'f SeI®e{ SET"T_NG CLOCK"
Press the MENU button on the
remote control.

CHA NN£%

You call select the desired channel by using the
CHANNEL • or • button or directly pressing the
number buttons on the remote control.

Press the PLAY/• or STOP/•
ton to point to "SETTING
CLOCK".

Note for using the number buttons:
• When selecting cable channels which are higher
than 99, press the +100 button first, then, press the
last two digits. (Example: to select channel 125,
first press the +100 button then press "2" and "5").
• You must proceed single-digit chalmel numbers
with a zero (Example: 02 ... 09).

Then, press the EFWD/II_ button.
2 Set 'AUTO CLOCK" to [ONIII
Press the EFWD/I_
or REW/'_I
until [ONI

CLOCK

................
os,

for the PBS

Press the PLAY/• or STOP/_' button to point to "AUTO CLOCK
CH".

Set the clock accurately for proper automatic timer
recording. If the Public Broadcasting Station (PBS)
is available in your area, follow "AUTO CLOCK
SETTING". If it is not, follow "MANUAL CLOCK
SETTING".

[AOT()]

Ecru

static#

AUTO
O_OCK {o_

....
i..........
EoF

. AmOCLOCK
c.

i_u%]

MANUAL CLOCK SET
Then press the EFWD/_ or
REW/'_I button until the channel
number for your local PBS station
appears.
If you do not know the PBS channel number, leave it
set to [AUTOI which is located before [21. The
TV/VCR will search automatically all available challnels for the local PBS station, and will select that
chalmel.

CLOCI( SE_ TING

You call have the TV/VCR set the clock automatically by using the Public Broadcasting
Station (PBS)
channel in your area. Once you have set the clock by
using the following procedure, the TV/VCR will
automatically
monitor the correct time alld date
being broadcast by the PBS station in your area,
using a new service called Extended Data Service
(XDS).
Make

.......... _ .....
.................
EoNI.....
AUTO

button repeatedly
appears,

II!!!!!_%te_'
the cha_w}e_ _umber

AUTO

but-

MENU
TIMER PROORAMM_NG
PICTURE CONTROL
SETTING CLOCK
CHANNEC SET UP
USER'S SET UP
VaSH_p SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
_NDEXSEARCH

4 Exit the Au_.o Clock Set[ii_ag
Press the MENU button o13the remote
return to TV mode.

control

sure ...

• TV/VCR power must be turned on.
,, Confiml that the antenna connections

_' '["orr_off the TV/VCF_
Turn the TV/VCR off. The Auto Clock functions
automatically while the TV/VCR is off.

are correct.

,, The cable converter box nmst be turned on if your
TV/VCR is connected directly to it. (See NOTES:
,, The chalmel

is properly

lf you choose [AUTO],
• The TV/VCR must search until the PBS channel is
found. It must scan earl1 channel for a couple of
seconds to detemdne if that channel is transmitting
the XDS signal.
• If the time that is automatically
set by this selected
PBS station is incorrect, it may not be your local
PBS station, but one from a different time zone.
Or if no chalmel is broadcasting
the XDS signal in
your area, no time will show. In these cases, you
must malmally enter the correct local PBS station,
or set the clock manually alld turn off the Auto
Clock Setting feature.

set in advance.

NOTES:
,, Auto clock setting only needs to be set once. But it
can be done again if the clock's time has become
incorrect for some reason.
• If the TV/VCR is connected directly to a cable
converter box or satellite box, the local PBS station
must be selected on the cable box itself, al3d the
TV/VCR must be set to the output chalmel of the
cable converter box or satellite box (usually channel 3 or 4), to be able to set up or correct the clock
automatically.

MA NgiA L CLOCK

If you do not know what your local PBS station is,
then follow "Manual Clock Settings".
The TV/VCR calmot control the channels of the
cable converter box or satellite box.

Make

S£'TT_NG

sure ...

• TV/VCR power must be turned on.
In the example below, the clock is to be set to:
DATE
May 7th, 2002
SETTING TIME
5:40PM
ll

EN
9103

NOTE:
'_ _'eleet SE'I"T_NGCLOCK"
Press the MENU button on the
@

remote

contro

Fees

(
....
1
I,- ...........

When unplugging the AC cord or if there is a power
failure for more than 3 seconds, you may have to
reset the clock.

TIMEFt pRO@FtAMM_N@
piCTURE
GONTFtOL

CHANNEL

SET

v.c._psFup

1P
tl PLAY/A | .... ......
or STOP/_' button to point to SET- | ZERO°A
.....RETU_,EO<
_NDEXSEA,OH
TING CLOCK".
( ..........
Them press the EFWD/I_- button.
LANGUAGE

2 oeleet MANUAL CLOCK
SET'

/ENGUSH]

AUTO

Press the PL
/A or STOP/_' but- ["
ton to point to MANUAL CLOCK l ....
SET".
Then, press the EFWD/_

GLOCK

MANUAL

Eo.1

CLOGK

SE7 77NG

If you want to change the clock,
1)Follow steps [11 and [21.
2)Select where you wmlt to change using the
EFWD/_ or REW/-_I button.
3)Enter correct numbers using the PLAY/A or
STOP/V button.
4)Press the MENU button on the remote control to
stan the clock.

............
| ........

_0 CHA NGE CLOC£

[AUTO]

SET

button.
PLEASE NOTE:

Sellect the month
Press the PLAY/A or STOP/_' button until your desired month
appears. (Example: May --+ (15)
Then, press the EFWD/_- button.

If there is no local PBS station in your area or on
your cable system, select "AUTO CLOCK" and press
the EFWD/_ or REW/'_I button to tum [OFFI this
function. Then you can manually adjust the clock.

.............
Mo_
.........,
05

..........

Select the day
.............
Pressthe PLAY/A or STOP/T but.......
_,,, ....
0s
ton until your desired day appears.
, ....
(Example: 7th --+ 07)
..........
Then, press the EFWD/I_ button.

Make sure ...
,, Press the POWER button to turn on the TV/VCR.
'_ Select 'CHANNEL SIET UP_'
MENU
Pressthe MENU button on the
...............
remote control,
s_=,_o_oo_
OHANNEL S_T UP
USER'S SET UP
Press the PLAY/_ or STOP/_' but ............
LANgUAgE /BNGUSH]
ton to point to "CHANNEL SET
_o.......
R_TO_._°<
T_M_ S_AROH
UP".
...........
PICTURE

5 Select the year
Press the PLAY/A or STOP/V button until your desired year appears.
(Example: 2002)
Then, press the EFWD/I_ button.

.... A........
_..........
_#
0.................
..........

Then,

the active channels

7 Selleet the mixture
.... A........
Press the PLAY/A or STOP/_' but .............
ton until the desired minute appears.
0...........
(Example: 40)
..........,

Start the clock
Press the MENU button on the
remote control.

40
i

the F.FWD/II_

button.

2 IBegi_ auto preset
Press the PLAY/A or STOP/_' button to point to "AUTO PRESET".
Then, press the F.FaND/II_ button.
The tuner scans and memorizes all

G Selleet the Ihour
.... A........
Press the PLAY/A or STOP/_' but .............
ton until your desired hour appears.
0...........
(Example: 5. PM)
.o_........
Then, press the EFWD/_ button.

press

GONTROk

............
A..........
.v)
A.........

in your area.

After semsni_sg
The tuner stops on the lowest

memorized

channel.

...... ]

Although seconds are not displayed,
they begin counting from 00 when
you press the MENU button on the remote control.
Use this feature to synchronize the clock with the
correct time.

/
12

The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you
can add the deleted channel into the memory again.)

EN
9103

'_ Select ONANNEL SET UP"
Press the MENU button on the
remote

control.

Press the PLAY/A or STOP/• button to point to "CHANNEL SET
UP".
Then, press the EFWD/I_
2 Se_ect"ADI[M)IELETE

Select "ENGLISH" or "ESPANOL"= Spanish using
P_O_O_Er_MER
P_O_R_,_CONTRO_the EFWD/_
or REW/_I button.
SEtTiNG CLOCK
O_ER'S°
...........
SET
O_
o_,,o,_
...... _o_E
.......
ZERO RETURN
Exit the Lal_j_agje mode
..........
v chip

IND[X

SET

Press the MENU button
return to TV mode.

STARCH

button.
OH'

Press the PLAY/A or STOP/V
ton to point to "ADD/DELETE
CH".
Press the EFWD/_

2 Select "ENGUSH" or "ESPANOL"
....

(,v>

button.

IEr}terthe deeiired

eha_}_el

control

_mlber
Select flais feature and the TV/VCR's
clock automatically will adwmce one hour in April, then reverse one
hour in October.

Press the PLAY/A or STOP/•
button until your desired channel number appears. (You can also use the
number buttons or the CHANNEL
A/'• button to enter it.) (Example:
CH8)

When Daylight-Saving
Time is ON, the clock will
ch_mge automatically
as follows:
,, First Sunday of April : At 2 AM the clock immediately ch_mges to 3 AM. Any timer programming
you have set to occur between 2 AM and 3 AM
will not record.

..........

4 Delete (or add} it from (i_to) memo&
Press the EFWD/_ or REW/-_I button. The channel
number ch_mges to light red. The channel is deleted
from memory.
,, To delete another channel, repeat steps [31 mad [41.
,, If you press the EFWD/_ or REW/_I button
again, the chmmel is memorized again.

,, Last Sunday of October : At 2 AM the clock
immediately
ch_mges to 1 AM.
Make sure ...
,, Press the POWER

button

to turn on the TV/VCR.

'_ Seleet"SETT_IIqG OLOOK"
Press the MENU button on the
remote control.

Added channel: Light blue.
Deleted channel: Light red.

....
_,c_o<_
oo_o_
TIMER

PROGRAMMING

SE_ING

GLOOK

CHANNEL

SET

Press the PLAY/• or STOP/• but ..... v_.,_
......
s_,oP
ton to point to "SETTING CLOCK".
o_
......_o<
ZERO
RETURN
Then, press the EFWD/_ button ........
_o.
LANGUAGE

Exit tlhe eham3e_eet_spmode
Press the MENU button o13the remote control to
returns to TV mode.

TIM_

[ENGMSH]

2 Set ©oSW (Dayliight-SavhsgTime} to [ONI

NOTE: To confirm that channel(s) has been deleted
or added, press the CHANNEL • or • button.

ton to point to "D.S.T.".
Then, press the EFWD/I_ or
REW/'_I button until tONI appears,

Make sure ...
,, Press the POWER

NOTE: If for some reason the menu is in Sptmish,
press the MENU button on the remote control, press
the PLAY/A button to point to "IDIOMA
[ESPANOLI", then press the EFWD/I_ button, then
press the MENU button on the remote control.

o...........
but .............
..........

on the remote

.........
...........
o.........
MANUAL

°LOOK

_o_
_o,o3
_&:

SET

button to turn o13 the TV/VCR.

NOTE: This function effects only the language
the screen menu and not the audio source.

on
Exit tlhe ©ayligh_, Savii_}g "l"ime mode
Press the MENU button on the remote control to
return to TV mode.

'] Select ' LANGUAGE"
(
.....
Press the MENU button on the
_E_,,,_...............
o_oo,
OHANNEL SET UP
remote control,
os_R.s
s_ up
Press the PLAY/• or STOP/V but........ z_o_Fo_/°_3
TrUESEARCH
ton to point to "LANGUAGE".
............
T_MER

pFtOGRAMMING

v °l_]p
SET
EANG/IA_3_

UJ_
/
ENGLtSH]

TO CA NCEL

7 HE DA YLIGHTmSA

V1NG

.....

Repeat steps [11 to [21, select [OFFI using the
EFWD/I_ or REW/-_ button.Then, press the MENU
button o13the remote control to return to TV mode.
13

EN
9103

TV OPERATION

The TV/VCR's picture controls - BRIGHT, CONTRAST, COLOR, TINT and SHARPNESS - are
preset to factory specifications. Although they are
tisually the best, you may need to make some ftmher
adjustments for a natural looking image.
NOTES:
,, Procedures must be followed within 5 seconds or
the Picture Control mode will be cancelled.

'f '/"t_rr_oilsthr_ TV/VCF_
Press the POWER button to turn on the TV/VCR.
2 Selk_etth_,_charm÷l r_umb_w
Press the CHANNEL • or • button to select your
desired channel number or press the number buttons
on the remote control.
Remember: If the TV/VCR is connected to a cable
box or satellite box, the TV/VCR must be on CH3 or
CH4, then the channel to be viewed must be selected
on the cable box or satellite box.

When you press the GAME button;
,, The TV/VCR comes on automatically if it is off.
,, The TV/VCR will be in external input mode automatically.

applitmces

pROGRAMMiNG

CHANNEL

SET

C:APTION

[OFF]

T_ME SEAFtCH

3 Adiust th÷ Ipictu_"eeor_trol
Press the F.FWD/_
your desired level.

MODE

or REW/"9 button to adjust to

REW/'_I
to decrease
brightness
to decrease

F.FWD/I_"
to increase
brightness
to increase

contrast

COLOR

to pale

to brilliant

TINT
SHARPNESS

to purple
to soft

to green
to clear

BRIGHT
CONTRAST

might affect the

If this happens, move this unit away from the appliance. If the color is still not correct, disconnect
power cord from AC outlet then reconnect it after 30
minutes.

CONTROL

_..........
USER'S SET UP
v..........[ENGUSH]
LANGUAGE
..........
,..........

2 S÷lleet item you wagt to adjust
Press the PLAY/• or STOP/• button until desired
control is displayed.
BRIGHT
CONTRAST
COLOR
BRIGHT
-DDDDDDDIDDDDDDD+
TINT
SHARPNESS

Press the GAME button or CHANNEL • or • button on the remote control,

Magnetism from nearby
color of the TV picture.

Press the PLAY/• or STOP/• button to point to "PICTURE CONTROL".
Then, press the F.FWD/I_ button.

Press the GAME button on the
remote control. "GAME" appears
on
the screen.

GAME

control.

pICTURE

NOTE: This function can not be set during recording.

Z HE

,, TV/VCR power must be turned on.

remote

This ffmction enables you to decrease the TV screen
contrast and making it suitable for use with a TV
GAME.

{.EL

Make sure ...

'_ Select PIOTUF/E OONTROU'
Press the MENU button on the

3 Adjunct sou_'sd
Press the VOLUME A or V button
to adjust the volume.

TO (,Af

,, When setting the Picture Control, the Game mode
will be cancelled.

• If there is a power failure of any kind, the unit will
retain its memory for this feature.

- 14 -

EN
9103

ZO
...........
TIMER

pROGRAMMING

LANGUAGE

ggN

_u
..............
SETTING CLOCK
o._cos_,_
_F
_'_opuP

2 Se_ec_ TV

3LhC'H]

ZERO RETU_N
TIME SEARCH

Then, press the F.FWD/_

p ROGI:tAM

V42,H_p

SET Up

M_NQ

o_t,o,_
....... _o<_
.......
Z_RO RETURN
..........
_ND_×
S_ARCH

IR£"FING"

v CH_PS_T UP

Press the PLAY/A or STOP/_
ton to point to "TV RATING".

3 IExit the eaptiiols selXibsg mode
Press the MENU button on the remote control to
return to TV mode.

TIMER

but ........

MPAA

RATING

button.

EN
9103

3 Select your degirod item
(
Press the PLAY/A or STOP/_' but- I,- _,
v

Exit tb÷ V-Olhip settiBg mode
Press the MENU button on the remote control to
return to original mode.
[VIEW]
[v,_<[v'_<
[v,_w]Ev'_w]
[v,_<

PG (

Them press the EFWD/_ button to
,_'_<_
<
toll
to point
to your
desired item.
[ ,_'__< '
select
[BLOCKI
or [VIEWl.

MZ{4A RA77NG

SE7 UP

Make sure ...

• When you select the rating category and turn it
[BLOCKI, the higher rating will turn [BLOCKI
automatically. Also, the lower rating will rum
[VIEWl autommically.
• When you turn "TV-Y" to [VIEWl, then all ratings
will rum to [VIEWI autommically.

• TV/VCR power must be turned on.
'_ Select VGHIP SET UP"
Press the MENU button on the
remote control.

M_NU

.................
_r,,_ o_oo_
CHANNEL SEt UP
PICTUIRE

CONTROL

USER'S S_T UP

Selection
TV-Y
TV-Y7
TV-G

Rating Category
Explanations
Appropriate
for all children
Appropriate for children seven and older
General Audience

Press the PLAY/_ or STOP/T but .............
ton to point to "V-CHIP SET UP".
..........
Then, press the F.FWD/_ button.
,..........

TV-PG
TV-14

Parental Guidance suggested.
Unsuitable for children under 14

TV-MA

Mature audience

2 Selleet '@PAA R£F_NG"
Press the PLAY/_ or STOP/_' button to point to "MPAA RATING".
Then, press the F.FWD/_ button.

LANGUAGE
CAPTION
TIME

only

When you select TV-Y7, TV-PG, TV- 14, or TV-MA
and you press the EFWD/_ button, the sub-ratings
will appear on the TV screen.
If you select the rating category (example: TV-PG)
mid turn it [BLOCKI or [VIEW], the sub-ratings
(example: V for Violence) will rum [BLOCKI or
[VIEWl autommically.
You can set the sub-rmings to [BLOCKI or [VIEWI
individually when the rating category is set to
[BLOCKI.
To set the sub-ratings individually, follow the steps
below.
• When you select [TV-Y7]:
Press the STOP/T or PLAY/A
button to select "FV" (Fantasy
Violence).
Then, press the EFWD/II_ button
to select [BLOCKI or [VIEWl.
When you select [TV-PG], [TV14] or [TV-MA]:
Press the STOP(T or PLAY/A
button to£,_elect D"(Suggestive
Dialog), L"(Coarse Language),
"S"(Sexual Situation), or
"V"(Violence). Then, press the
F.FWD/_ button to select
[BLOCKI or [VIEWI.

f
]
]
]
]

TV ¥7

[BLOCK]

Selleet your desired iitem
Press the PLAY/A or STOP/_' button to point to your desired item.
Then, press the F.FWD/D_ button to
select [BLOCKI or [VIEWl.

TV ¥
TV ¥7 (
)
TVO,
TV@G (DLSV}
TV 14 (DLSV}
TV_A(LSV)

v.........
M_......
TV

RATtNG

[v,_]
[vtE_q

_
pe

_C_17

[vt_q
[BLO@q
[BLOCK]
DLOOK]

Selection
O

Rating Category
General Audience

Explanations

PG
PG-I 3

Parental Guidance suggested.
Unsuitable for children under 13

R
NC-17

Restricted; under 17 requires accompanying parent or adult guardian
No one under 17 admitted

Mature audience only

• When you select the rating category and turn it
[BLOCKI, the higher rming will turn [BLOCKI
automatically. Also, the lower rating will turn
[VIEWl automatically.
• When you turn "G" to [VIEWl, then all rmings
will rum to [VIEWI automatically.

W PG

$
V

[ENGLISH]
/©_F]

[BLOCK]
[BLOCK]
[BLOCK]
[BLOGK]
[BLOCK] /

4 Exit the VsCMp settiBg mode
Press the MENU button on the remote control to
return to original mode.

EVlEW]
EVlEW]
EVlEW]
[BLOCK1
[BLOCK]
[BLOCK]

Note: When you select [TV-MAI,
"D" does not appear on the TV screen.
• The sub-ratings which set to [BLOCK] appears
next to the rating category in the TV RATING
meuu.

EN
9103

NOTES:
" FM mode is not available for model SRC22194.
,, The radio frequency indication repeats to appear
and disappear.
,, You ca1 not record the FM radio wave broadcasting.
,, If you receive a weak radio signal, you may change
the FM Antenna mode to INT(intemal) or
EXT(extemal) by following the step below.
l)Press the MENU button. Press the PLAY/• or
STOP/_' button to point to "CHANNEL SET UP".
Then, press the EFWD/_ button.
2)Press the PLAY/• or STOP/• button to point to
"FM ANTENNA". Select [INTI or [EXTI using
the EFWD/_ or REW/_I button.

This function enables you to receive FM radio broadcastln

'_ Set the gbl mode

Press the TV/FM button oll the
[
remote control. The radio frequency|
appears oll the TV screen.
|

FM880MHz

2 Sebet the radio _requescy you wank to rece ve
Press the CHANNEL • or • button until your
desired radio frequency appears.

This TV/VCR will operate with any cassette that has the _
mark. For best results, we
recommend the use of high-quality tapes. Do not use poor quality or damaged tapes.
A CASSET T£

bYS££77NG

Insert the cassette in the direction as shown. Push in
gently, but contfimously, on the center-back of the
cassette until it is drown into the TV/VCR. The
TV/VCR will automatically turn on.

Make sure ...

'] hsselrt a prerecord'tied tape
Window,

If the erase-protection
tab has been removed,
TV/VCR will start playback automatically.

,, Avoid moisture. Moisture
on the tape if it is moved
warm place or visa versa.
these conditions, to avoid
your TV/VCR, wait until
room temperature and the
,, Avoid extreme heat, high
fields.

2 'to begin playback

WRONG

CORRECT

Press the PLAY button.
Note: If any menu is activated on
the screen, the PLAY button does
not function. Press the MENU button to clear the menu, then press the
PLAY button.

condensation
may occur
from a cold place to a
Before using a tape with
damage of the tape trod
the tape has warmed to
moisture has evaporated.
humidity and magnetic

,, Do not tamper with the cassette

the

( .....

/
/
/
[

'_%step p_aybaelk
Press the STOP button when playback is completed.

medlanism.

,, Do not touch the tape with your fingers.

EN
9103

The TV/VCR has tm auto repeat function that allows
you to repeat a tape indefinitely without touching the
PLAY button.

This feature is very useffd in finding or skipping over
a particular scene on a tape. In this mode, the sound
will be muted.

ALL REPEAT: Repeat playback from the beginning
to the end of the tape.
BLANK REPEAT: Repeat playback trom the beginnm to a blank art ol more than 10 seconds
'_ Se_et USER'S SET UP'
Press the MENU button on the
remote control.
Press the PLAY/it or STOP/_' button to point to "USER'S SET UP".
Then, press the EFWD/I_ button.
2 Select 'ALL" or 'BLANK"
Press the PLAY/it or STOP/_' button to point to "REPEAT PLAY".
Press the EFWD/I_ or REW/'_I
button repeatedly until your desired
selection [ALLI or [BLANKI
appears.

1)You may view a video tape at a high speed in
either a forward or reverse direction by pressing
the EFWD or REW button during playback (in the
SP / LP / SLP modes).
2)Press it again and the TV/VCR will now search in
super high speed (in the LP / SLP modes only).
NOTE: Tapes recorded in the SP or LP mode will
display a noise bar on the TV screen and the picture may revert to Black and White. This is normal.
3)Press the PLAY button to return to normal speed.

................
SE_,_G
OLOOK
USER'S SET UP
VLAN_OA_E
........ }'_,_]
,,,_..........
_A_o.
PICTURE

CONTROL

CHANNEL

SET

CAPTION

[OFF]

_NDEX SEARCH

USER'S SET UP
RENTAL
REPEAT
pray
AUTO RETURN

_[01_
[ALL].
[OiVF !

SgA £g H

PICTU£E

This function allows you to search easily a beginning
point that you want to review by rewinding or fast
forwarding.
NOTE:

Zero Return WILL NOT work on a blank tape or a
bhmk orhonoIata
e
J

Stop

t/_p@

y@_l¢'

d@eig@d

pOi_lt

Exi{ the Re{seat Hay ee{tb_g
Press the MENU button on the remote control to
return to the TV mode.

Rewind or fast forward the tape to the beginning
point from which you want to review.

4 Start playback
Press the PLAY button to start the Repeat Play.
"REPEAT PLAY I_" appears.
,, Once you select the Repeat Play mode, it stays in
effect even after you rum off the TV/VCR.
,, If the Rental mode is set [ONI, the "RENTAL
PLAY I_" display has priority.

Press the COUNTER RESET button repeatedly.

TO CANCEL

4 To activate 'ZERO IRETURN"mode
Press the MENU button on the
.....
remote control.
_,_PRO_AM_,_p,O_ORE
OO._ROL
Press the PLAY/it or STOP/_' but°OS_R'_
...........
S_o_
ton to point to "ZERO RETURN".
O_,T,O,........
EO<_
.......
ZERO RETURN
Then, press the EFWD/I_ button.
T,_E_O_
_NDEX
SEARCH
The counter will appear on the TV screen.
The tape will automatically stop when the counter
returns to 0:00:00.

2 I[,/esetthe eoul_ter to 0:00:00

THE ££PEAT

3 IBeghs recordi_sg or playback
Press the RECORD or PLAY button.
Press the STOP button when recording or playback is
completed.

PLAY MOD£'

Repem steps [11 and [21, select [OFFI using the
EFWD/I_ or REW/-_I button on the remote control.
Press the MENU button on the remote control to
retum to TV mode.

SETglNG

V-CHIP

If there is a power failure of any kind, the unit
will retain its memory for this feature.

CLOCK

SET

EN
9103

TIME
The

Time

quickly

adwmce

simply

by entering

function

makes

the tape to your
the exact

it possible
desired

amount

3)Press the EFWD/_ or REW/-_I button to start
index search. If you wtmt to go forward, press the
EFWD/I_ button. If you want to go back, press
the REW/-_I button.
• After index search, the TV/VCR will play the tape
automatically.
• In some cases, the index mark at the beginning of
video tape cannot be detected.

position

of playback

time you w_mt to skip,
NOTES:
• Time Search c_m be set up to a maximum of 9
hours 50 minutes (9:50) by 10 minutes at a time,
• This function will not operate in recording mode,
In the example below: To watch a program that is 2
hours, 50 minutes from the present tape position, in
either direction.

_gl_elP{

S@_eC_

Press the SLOW button to reduce fl_e playback speed.
The TV/VCR mutes fl_e sound during slow motion.
Press the PLAY button to return to nomml playback.
NOTE: If left in the Slow mode for more than five

tape

_lll_lll_I[_E

minutes, the TV/VCR
Stop mode.
SEARCH"

will automatically

go into the

mode

Press the TIME SEARCH button (with each push it
will increase by 10 minutes).
This function enables you to improve the picture
Press the PLAY/A or STOP/_' button until your desired time appears.
(Example: "2:50" stmlds for 2
hours 50 minutes)

....

TIME

tapes.

remote

playing

back

worn

cassettes

control,

such

....

TIM _1:t pROGIqAMM_NO

CHANNEL

2 Set

},/EN"rAL"

[ON]]

Press the PLAY/A or STOP/_' button to point to "RENTAL".
Press the EFWD/_ or REW/'_I
button until tONI appears.

¢_t_hi_

IExit the

s_=,_'c_°_
co_m_O_c_o_

Press the PLAY/_ or STOP/_' button to point to "USER'S SET UP".
Then, press the EFWD/I_ button.

d IBe@_Time Sea_"eh
By pressing the REW/'_I or EFWD/I_ button, the
TV/VCR will rewind or fast forward to the specified
point.
The time counts down as the searching progresses.
When 0:00 is reached, the tape will start playback
automatically.
7 HZ

when

rented

Press the MENU button on the

If you wish to ctmcel the Time Search at this point,
press the MENU button on the remote control.

TO CANCEL

quality

S_T

_ v°S_o,,_
......
_, o_
_ANGUA_E [_NeUSH]
_o.......
_,o_,_°<
TIME SEA_C_
'.........
....

,......

'
IeFI
_omo,_,o_ to<
RENTAl

.....

ON]

_qe_ta} _ettil_¢j

Press the MENU

button

on the remote

control

return to the TV mode.

Press the STOP/EJECT button on the TV/VCR or the
remote control. This will delete the selected time.

4 S{all't p_ayback
Press the PLAY button to start playback. "RENTAL
PLAY _" appears.
• Once you select the Rental mode, it stays in effect
even after you turn off the TV/VCR.

An index signal is recorded on the
;,_#[gag_#g,_
tape automatically when the recordg,_&_
USER'S SET UP
ing is started. To view a recording at _A'_g_E_%_'*"_
MENU
a specific start point:
_gL'_'btgZ
_
l)Press the MENU button on the
...........
remote control. Press the PLAY/A or STOP/_' button to point to "INDEX SEARCH", then press the
EFWD/I_ button.
2)Press the PLAY/_ or STOP/_' button within 30
seconds until the number of programs that you
want to skip appears.
TiME

TO CA NCZL

7 HE R£iVT½L MODE

Repeat steps [11 and [21, select [OFFI using the
EFWD/_ or REW/-_I button on the remote control.
Press the MENU button on the remote control to
return to TV mode.
If there is a power failure of any kind, the unit
will retain its memory for this feature.
19

EN
9103

hi the Pause/Still mode only, when the picture begins
to vibrate vertically, stabilize the picture by pressing
the CHANNEL • or • button.
NOTE:
If there are video noise lines on the screen, see Tracking
Adjustment section.

You ctm view a still picture on the TV screen during
playback (the Still mode). Press the PAUSE/STILL
button during playback. Only tapes recorded in the
SLP mode will show the least amount of lines. Press
the PLAY button to return to playback.
NOTES:
,, You can adwmce the picture one frame at a time by
pressing the PAUSE/STILL button during the Still
mode.
,, If it is left in the Still mode for more them five minutes, the TV/VCR will automatically switch to the
Stop mode.

,, Tracking adjustment will be set automatically
(Digital Tracking function) when you start playback.
,, However when playing pre-recorded tapes or tapes
recorded on units other thtm your own, noise lines
(black mid white streaks) may appear on the playback picture. If this occurs, you cml adjust the
tracking control mmmally by pressing the CHANNEL • or • button until the streaks disappear. To
return to the DTR function, stop the tape once and
start playback again.
,, You can reduce the noise lines by pressing the
CHANNEL • or • button in slow mode, too.
Tracking adjustment in Slow mode will not be set
automatically.
NOTE:
,, In Still mode, press the SLOW button and press the
CHANNEL • or • button until streaks disappear.
To return to Still mode, press the PAUSE/STILL
button again.

Make

f f? re rec¢ rdh g, mg f e
The desired channel is selected by pressing the number buttons on the remote control or the CHANNEL
Up/Down button. (If the TV/VCR is connected to a
cable box or satellite box, the TV/VCR must be on
CH3 or CH4, then the channel to be recorded is
selected on the cable box or satellite box. )
There is a tape with its safety tab into the VCR.
The desired recording speed is selected in SP(stmldard play) or SLP(super long play) mode by presslug the TAPE SPEED button on the VCR.
Tape Speed

Recording/Playback

Time

Typeof tape
SP mode

T60
1 hour

Tl20
2 hours

Tl60
2-2/3 hours

SLP mode

3 hours

6 hours

8 hours

ERASE

PREVENTI()N

You ctm prevent accidental erasing of recording
by breaking off the tab
on the back edge of the
cassette.

If you decide to record
on the tape again, cover
the hole with plastic
tape.

sure ...

" TV/VCR power is turned on.
,, Insert a cassette tape with its erase prevention tab
in place. (If necessary, rewind or fast forward the
tape to the point at which you wtmt to begin
recording.)
NOTE: This unit will ONLY record trod view the
same channel.

1)Begin the recording by pressing the RECORD button.
To temporarily stop recording or resume it, press
the PAUSE/STILL button. After the VCR has been
in Pause mode for 5 minutes, it will stop automatically to protect the tape _md the video head.
NOTES:
,, After five minutes, the TV/VCR will automatically
switch to the Recording mode to prevent tape
damage.
,, If "CLOSED CAPTION (ON)" is selected, the
On-Screen Display will appear for 5 seconds, then
disappear.
2)Stop the recording by pressing the STOP button
when recording is completed.

Plastic Tape

- 20 -

EN
9103

Avoid overlap
This function enables you to set the recording length
simply by pressing the REC/OTR button oll the
VCR.
1)Begin OTR by pressing the
REC/OTR button on the VCR
repeatedly until the desired
recording length appears.
Recording stops when 0:00 is
reached.
NOTES:

• The program
first.

...

with the earliest

• The illustration
of recording.

below

be done from the remote

9:30AM-12:00PM

[

9:00AM

'_ Sek_ct _'T_EB
Press the MENU

,1.

Make

on the remote control.
TIMER

pROGFtAMM_NG

_,,_.............
o_oo_
°"_o_
.........
_To_
v CH_P SET Up
LANGUAGE [ENGUSH]

button,

o_
..... Eo<
ZERO RErUnN

• If you have not yet set the clock,
,..... _o.
"MANUAL
CLOCK SET" appears. If so, follow
stops [3] to [8] on page 11. Then set the timer
recording.

480 minutes

2 Select

your desked

p_'og_"am pesitio_% (1,_8)

Press the PLAY/A or STOP/T but- ( ................
ton to select the desired program
| c" _y.
:_" .E_ |
'
/....
:--:
po.S"ltion,
h
.........
I/
......_
4.....
>.
< Tie1 press the FFWD/I_
bttton
I:: :_::::: ::: :x x
[

X JX_Xi :X

!IX X

Set the eha_mel sumlber

Press the PLAY/A or STOP/V button until the desired chtmnel number appears.
(Example: CH61 )
Then, press the EFWD/I_
Remember:

• If your TV/VCR is connected to a cable or satellite
box, you must set the TV/VCR to channel 3 or 4
to match the output channel of the box.
• Clock is set to the correct time and date before setis turned

is SHADED

TIME SEARCH

sure ...

ting the timer.
• TV/VCR power

per/od

12:00PM

PBOGg4AMMIIHG"

button

Press the EFWD/_

You may set the TV/VCR to start trod end a recordlug while you are away. You can set 8 programs to
record on specific days, daily or weekly within a 1
year period.
In the examph" below, the timer is being set to record:
DATE:
July 5th, 2002
SETTING TIME: from 7:30PM to 8:50PM
CHANNEL:
CH61
TAPE SPEED:

11:00AM

Confirm "TIMER PROGRAM .....
MING" is pointed to by pressing
the PLAY/A button.

8:00

10:00AM

"Recordlng

Recording
length
(continuous
recording)
0:30
30 minutes
1:00
60 minutes
1:30
90 minutes

Sequence

Program : I

Display

the sequence

10:00AM-11:00AM
Program 2
9:00AM-10:00AM

,, If the tape runs out before the end time, the
TV/VCR will switch to the Stop mode immediately, eject the tape and turn itself off.

17 pushes

start time will record

demonstrates

Recording

,, To stop the OTR operation, press the STOP button
on the TV/VCR or on the remote control.

Push(es)
1 push
2 pushes
3 pushes
4 pushes

will not be record-

• Once the earliest program finishes recording, the
overlapping
programs will record in the order of
the program number.

( OTR<2
a0_

Program

,, This l%nction CANNOT
control.

of programs

There is a chtmce that a program
ed. When programs overlap:

on to program

button.

If your TV/VCR is connected to a cable or satellite
box, you must set the TV/VCR to charnel 3 or 4 to
match the output channel of the box.

it.

,, To insert a cassette tape with its erase prevention
tab in place. (If necessary, rewind or fast forward
the tape to the point at which you want to begin
recording.)
,, To set the channel you want to record

4 Select

@see, evep{

For once recording

da'_ e_" weeklly ree¢_"dhg

Press the PLAY/A (up) button
until the desired date appears.
(Example: "7/05" for July 5th).
Then, press the EFWD/I_
button.
21

EN
9103

For

every

recolzl
time
day.

day recording

a TV program
on the same

(Example:

: To

TIMER PROGRAMMING

at the same

channel
Monday

CH DATE

BEG_N g_qD

'_0 gigish

ever 3,
- %+i- ii-i -d :-• 6¢<-1VR¥ DAY;4>

through

Sunday)
/

Press

the STOP/_'

(down)

but-

ton until "EVRY DAY" appears.
EFWD/_
button.

Then, press the

For weekly recording : To recolzl a TV program
the same time on the same channel every week.
(Example: eve13, Monday)
Press tile STOP/_' (down) button
until "EVRY" and your desired
day of the week appear together.
Then, press the EFWD/I_
button.

Set b;_,gi_i_g

OH DATE

return to original

timer

recording. The RECORD indicator lights up.
,, You must turn off the TV/VCR to activate automatic timer recording.

ttEG_It IND

T_MER pROGRAMMING

If power is not turned off and you continue watdling TM "TIMER REC STANDBY"
starts flashing
on the TV screen 2 minutes before the programmed
start time.

hot_l¢

Then, press the EFWD/_

To shift file time schedule
recording.
1 )Press the POWER

button.

min_4e

(

................

Press the PLAY/A or STOP/*
bt,t- / ii _A7 iii" ill /
ton tmtil the desired minute appears./
:: 2: :: :; ;,:: ::/
ttzxamp_e:
. u for/:aoww)
| :: ,:: ::
:: ::|
Then, press the EFWD/II_ button.
[
-_ - : :- j

Press tile PLAY/A

mode.

'f '_ Set the time_r
Press tile POWER button to set automatic

Press tile PLAY/I
or STOP/_' button until the desired hour appears.
(Example: " 7, PM" for 7:30PM)

Set begislsing

set/:i_% I've IprOg_'am

Press tile EFWD/I_
or REW/-_I button. The program
is now completed.
,, To set another program, repeat steps [2] to [10].
,, Press the MENU button on the remote control to

-: - -:
<

or STOP/T

but-

7_ ?7_
-

ton until tile desired hour appears.
7 set '% PM" for 8:50PM)
(Example:
Then, press tile EFWD/_
button,

8 se_ e_sdminute

4....

_" ==D
: -

-: -

,. .......... _=>!= .....
i ...................
................ ]
i! !ii ii
!i ii

_ ................

Press tile PLAY/_ or STOP/*
but- [ i" ?F_ 111= VD -1
ton tmtil tile desired minute appears.[
:: I:: ::
:::1
(Example: "50' for 8:50PM)
[' ;
]
Then, press tile EFWD/I_
button.
[ :: ;:: ::
:: ::j
61

Se{ the tape _peed
Press tile PLAY/_ or STOP/_' button until the desired tape speed
appears. (Example: SP)

7/LLq FRI

7:_2J_

of an automatic

timer

button.

2)Repeat step [11 on page 21.
3)Press the RECORD button and select the desired
program using the PLAY/A or STOP/V button.
4)Press the RECORD button again.
Each additional push will shift forward the
begin/end time lbr recording by 10 nfinutes. When
tile recording is already in progress, each additional
push will shift lkwward tile end time only. If you
want to cancel while setting, press tile
PAUSE/STILL
button on the remote control. The
recording time returns to the original time.
NOTE: When you shift forward the time schedule
during recording, the recording speed will automatically be set to the SLP mode.
5)Press the EFWD/_
or REW/-_I button to exit the
setting menu. Then press tile MENU button on tile
remote control to return to original mode.

}{:g0 _

T(} COR]¢ECT

A P_{OG_{A M

• While setting a program;
press the REW/'_I button to go back one step and enter file correct numbers using the PLAY/_ or STOP/_' button.
,, After setting a program;
1)Press the POWER button.
2)Repeat steps [ll - [21 on page 21.
3)Press tile EFWD/I_
button (or press tile REW/'_I
button to go back one step) until the part you
wtmt to correct begins flashing, then make tile
changes pressing the PLAY/A or STOP/V button.
4)Press the POWER
recording.

- 22 -

button to set automatic

timer
EN
9103

TO CA NCH,

A J_=A UT@MA

TIL" I_IM£'£
2 Set AUTO RE"I"URN" to ION]
Press the PLAY/A or STOP/31' button to point to "AUTO RETURN".
Press the EFWD/I_
or REW/'_I
button until [ONI appears. Then,
press the MENU button on the remote
return to TV mode.

• After setting a program;
1)Press the POWER button.
2)Repeat steps [11 N [21 under TIMER RECORDING, page 21, trod select a program you want to
cancel.
3)Press the T-PROG. CLEAR button.
4)Press the MENU button on the remote control to
return to TV mode.

.... ,......
RENTAL

{OFF]

...........
AUTO

'_°_=_

RETURN

control

ION] •

3 Auto ReIur_ will be9i_

• While recording is in progress;
1)Press POWER button.
2)Press the STOP/EJECT button on the TV/VCR.

When all the timer recordings are completed, the
TV/VCR will rewind to the beginning of the recorded
program(s).
NOTE:

TO CHECK

• If you press the POWER button while tape is
rewinding, the Auto Return will stop.

THE £ZG1N/ZNL)

TIME

1)Press the POWER button so that the REC indicator
goes off.
2)Press the MENU button on the remote control.
3)Confirm "TIMER PROGRAMMING"
is pointed
to.
4)Press
grams
5)Press
return

4 Watch the IeeCorded program
Press the PLAY button.

TO CANCEL

the EFWD/I_
button. The details of proappear on the TV screen.
the MENU button on the remote control to
to TV mode.

THE A UTO RETURN

Repeat steps II l and 12l, select IOFFI using the
EFWD/I_
or REW/'_I button. Then, press the MENU
button on the remote control to return to TV mode.
If there is a power failure of any kind,
will retain its memory for this feature.

• Make sure the channel you want to record is properly set in adv_mce.
• It is not necessary to press the RECORD button for
timer recording.
• Recording begins automatically
at the Starl time.
• If you are recording using a Timer mode, you may
not operate the unit mtmually.
• The erase-prevention
tab on the cassette must be in
place (or you must put tape over the hole).
• If the erase-prevention
tab is removed, the cassette
will be ejected when the POWER button is pressed
to off.

the unit

The Wake Up Timer function turns on the TV/VCR
without using the POWER button after a desired
period of time.
NOTES:
• Use the remote

control

for this procedure.

• Clock must be set to the correct time before setting
the timer.
• If you want to select [TAPE], you must inserl a
cassette tape in the TV/VCR. The tape will start
playback automatically
on your desired time.

• If the tape runs out before the end time, the
TV/VCR will switch to the Stop mode immediately, mad the tape will be ejected.

'] Select "WAKE UP TIIbIEIB"

Press the WAKE-UP/SLEEP button
on the remote control once, _md
confirm "ON/OFF" is pointed.
i WAKE
up,-O,,OFF
Press the EFWD/_ or REW/_I
TIME
112:00
button until tONI appears.

With this feature, after timer recording is finished,
the beginning of the recorded program(s) can be
searched for automatically.
'_ oclect

USEF,,IS SET

Press the MENU
remote control.

button on the

TVtTAPE

i'r _{j

....
TIMER
pFtOGRAMMING
p_CTUI:tE
CON rROL

...........
_ v.o.:p°s_'s
s_rs_'_
opuP
CHANNEL

LANOUAGE

Press the PLAY/A or STOP/T button to point to "USER'S SET UP".
Then, press the EFWD/_
button.

TIMER

SET

[ENGLISH]

z_=o°
......=_,o=,_°_
TIME STARCH
...........

EN
9103

Select TV"or

TAPE"
The Sleep Timer function rums off the TV/VCR
without using the POWER button after a desired
period of time.
NOTE:

Press the PLAY/•
or STOP/•
buttoll until it points to "TV/TAPE".
Press the EFWD/I_
or REW/-_I
button, and select [TVI or [TAPEI.

,, This function
mode.
3 Set wake _p tree
Press the PLAY/•
or STOP/•
button until it points to "TIME".
Press the EFWD/I_
or REW/-_I
button until your desired wake up
time appears.
Each additional push will increase
time by 10 minutes.

'_ Select'

IIq4K£

during Recording

$LIEEP"I"I@ER _

Press the WAKE UP/SLEEP button on the remote
control until "SLEEP TIMER" appears.

(or decrease)

Exiit t'_e Wake Up "['iimer sett_sg
Press the MENU button on the remote control
retum to TV mode.

T@ (TAJ_=C£L TR£

does not operate

2 SeI sleep tree
Press the PLAY/A, STOP/•,
EFWD/II_ or REW/'_I button until
your desired sleep time appears.
Each additional push will increase
.......... E_,00_
the time by 30 minutes up to 120 minutes.
Press the MENU button on the remote control to exit
the Sleep Timer setting.

the

U? TIM££

T@ CANCP'L

Press the WAKE-UP/SLEEP button on the remote
control once, and confirm "ON/OFF" is pointed.
Press the EFWD/I_ or REW/-_I button until [OFFI

7"HE SL££1 _77M££

Press the WAKE UP/SLEEP button on the remote
control until "SLEEP TIMER" appears.
To view the time left for sleep timer, press the
WAKE-UP/SLEEP button twice, then press the
MENU button on the remote control to exit the sleep
timer setting.

appears.

COPYING A VIDEO TAPE
You can make copies of video tapes made by friends
or relatives for your enjoyment.

l)Insert a pre-recorded
video cassette
(Playing) VCR or camcorder.

2)Insert a blank video cassette, or one you want to
record over, into the TV/VCR's
cassette compartment

WARNING: Unauthorized recordings of
copyrighted video tapes may be an
infringement of copyright laws.

3)Press the SPEED button on remote control for the
TV/VCR to select the desired recoNing speed
(SP/SLP).

Connect your TV/VCR and a Source (Playing) VCR
using the following diagram.
oo
oo

4)Press the CHANNEL
• or • button on the
TV/VCR until "AUX" appears on the screen.
NOTE: "AUX" is found below the lowest numbered

oooooooocoooo
ooooooooooooo

ooooooooooco
....
O000000000000000
__oooooooooooooooo

[The TV/VOFt]

O000000000CO0000

into the Source

oooooooo_
....
oooooooooooooo

888888888888£88

memorized
channel. (Example: CH2)
5)Press the RECORD button on the TV/VCR.
6)Begin playback of the tape in the source (Playing)
VCR or camcorder.
NOTE: For best results during copying, use the
TV/VCR's
front panel controls whenever possible.
The remote control might affect the source (Playing)
VCR's playback operation.

[Ex: Source (playing)
VCFt or camcorder]
Audio/Video
adapter cable
(not supplied)

® ®
®
VIDEO

24-

EN
9103

ON SCREEN

DISPLAY

To check the Counter, Clock trod Channel number on the TV screen, press the DISPLAY button on the remote
control. Each time you press the DISPLAY button on the remote control, the TV screen will change as fl_llows:
g_HEz _li£ CLOS£D
CAt XZOz MODE L5 OFF:

,, Counter mode: After 5 seconds, only
the counter remains. To clear it, press
the DISPLAY button.

Press
once

,, Clock mode: After 5 seconds, only
the clock and the ch_umel number
remain. To clear them, press the DISPLAY button.

WHEN

7'Hb2 CLOS£7_

CAP770N

.A
/

MODE

Pressonce

L5 ON:

OFF

mode

Clock/Counter

mode

,, The On Screen Display disappears after 5 seconds.
,, This is true even if the MUTE button is pressed, or the
PAUSE/STILL button is pressed while recording.
sp

COUNT 0:_2:34

SPECIAL FEATURES

This shows the elapsed recording or playback time in
hours, minutes, trod seconds. (The displayed time
will not change on a blank tape or blank portions on
the tape.)The "-" indication will appear when the
tape has rewound further than "0:00:00" on the tape
couuter.

(;A B1NE2

• When the end of a tape is reached during recordlug, playback, or fast-forward, the tape will automatically rewind to the beginning. After rewinding
finishes, the TV/VCR will eject the tape _md turn
itself to off.
• This function is operative when Repeat Play is set
to the [OFFI position.
,, The tape will not auto-rewind during timer recording or One Touch Recording.

CL£'ANING

back, the video heads in your TV/VCR may need
to be cleaned.

• Wipe the front panel and other exterior surfaces of
the TV/VCR with a soft cloth immersed in lukewarm water _md wrong dry.
,, Never use a solvent or alcohol. Do not spray insecticide liquid near the TV/VCR. Such chemicals
may cause damage and discoloration to the
exposed surfaces.

l.Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cle_mer.
2.If a Video Head Cleaner does not solve the problem, please call our help line at 1-800-968-3429, to
locate an Authorized Service Center.
NOTES:
,, Remember to read the instructions inchJded with
the video head cleaner before use.

A UT() H£'AD CLEANING

,, Clean video heads only when problems occur.

" Automatically cleans video heads as you insert or
remove a cassette, so you c_m see a clear picture.
,, Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt
accumulated on the video heads after long periods
of use, or the usage of rental or wom tapes can
cause this problem.
If a streaky or snowy picture appears during play-

,, Should your TV/VCR become inoperative, do not
try to correct the problem by yourself. There are no
user-serviceable paris inside. Turn oft; unphJg the
power cord, and please call our help line at 1-800968-3429, to locate an Authorized Service Center.
25

EN
9103

TROUBI ESHOOT NG
If you

have

locate

the PROBLEM

remedy

followed

the instructions

contained

in the left column

below.

GUIDE

in this

manual

Check

the corresponding

trod have

CORRECTIVE

No power.

No picture

trod sound.

No picture

or poor

picture

TV/VCR.
No sound

Timer

or poor

sound.

recording

Cannot

sure

the AC cord

• Make

sure

the power

• Make
• Check

sure the AC cord is connected
_mtenna connection.

is not possible.

go into

Record

mode.

Playback

picture

No picture

is partially

but the audio

noisy.

is OK in

playback.

TV/VCR,
column

by infrared

Remote

Control.
Video

or color

fades

making

CLOSED

in and out

a copy

of a video

CAPTION

My TV/VCR

• Adjust

volume

control

• Press

the MUTE

• Make

sure

the timer

recording

• Make

sure

the power

is off.

• Make

sure

the TV/VCR

• Make

sure

the tape

will

in its entirety

or there

what

said.

not show

• Head

cleaning

the text

are

on the TV screen,

scrambled

guide

closed

of the captions

listed

with

sure

batteries

copy

were

but none

displayed,

video

troy captions.
it being

tape

The
closed

TV screen shows
on certain
channels.

does

tape

not

box

program

that

are common

captioned,

a black

Refer

video

box

the

to "AUTO

CHANNEL

•

HEAD

You are experiencing

captions

remain

rate,

may

any

with

at times

given.

the decoder

behind

editing

read

because
dialogue
companies

per

lines,

minute.

to insure

TV screen

captions

that

If a
the

dialogue.

thunderstorms,

etc.

to appear.

compression

additional

ctmnot

words

the actual

is used

the current

a time

by the

uncorrected.

production

of 220 words

power

use

so that

misspelled

captioning

selective

made

through

the captions.

seconds

or incomplete

program

will

show

Most

errors

may pass

for editing

by building,

up the actual
Since

not

a few

up-to-date

scrambled

• Broadcasters

and spelling

to a maximum

that

caused

cause

REMEDY

broadcast.

a dialogue

exceeds

• You are

using

tape.

company

will

are delayed

dialogue

copying

the

to an AC outlet.

broadcast

available

for live

display

video

cover

control.

production

time

normal

company

picture

is connected

a live

of the

• The

If need,

25.

a copyrighted

A prerecorded

may

tab.

protection.

captioning

captions
My prerecorded

is set correctly.

be necessary.

in remote

watching

• Captions

unit.

tape.

copy

guard

or main

sound.

an erase-prevention

the AC cord

• Interference

a TV show

captioned

control

is set correctly.

clock

has

may

• Check

can

white

My program

memory.

to restore

on page

• Make

• You are

is a delay

My captions

mentions

plastic

to an AC outlet.

• Adjust tracking
control
for a better
or • button on the TV/VCR.

closed

My TV/VCR

as being

with

on remote

button

POSSIBLE

captions

that are misspelled,

boxes

antenna.

controls.

PROBLEM

is showing

is being

or replace

picture

• You can not
tape.

its tuner

direction

to an AC outlet.

on.

program

• Adjust

CLEANING"

No operation

is connected

is tumed

• Adjust

hole

your

ACTION

• Make

• Let the TV/VCR

show

in operating

CORRECTIVE

the problem.
PROBLEM

when

difficulty

process

advertising
the compressed

time

to speed
ctm be

information,

be lost.

tape

was either

accidentally

tm illegal

left out

copy

or the tape

the captioning

signals

duplicating
during

the

process.
in the TEXT

mode.

Select

CAPTION

mode

to CAPTION

[OFF].

- 26 -

EN
9103

Gf_N!: A_AL SPECH,

TCA 770NS

g LE(, ZI_I(,A L SPI_CIF

CRT :

13 or 19 inch in-line gun, 90"
deflection tube
Television system :
NTSC-M
Closed caption system :§ 15.119/FCC
Video Heads :
Tape width :
Tape speed
SP:
LP:
SLP :
Tuner channel
TV VHF Low :

Video input level :
Audio input level :
Video S/N ratio :
Audio S/N ratio :

OTHE'R SPEC1FI(L4770_VS

33.40mm/sec.
16.67mm/sec.
11.12mm!sec.

[ SSC132 ]
Power requirement
Power consumption
Dimensions
:

Weight :
[ SSCl_9 2 ]
Power requirement
Power consumption
Dimensions
:

5A
A5_AI, AM
J_W
W+I _W+84
88M08MHz

Weight

VHF/UHF 75 ohms
unbahmced
RCA connector X 1
RCA connector × 1
1/8" monaural (3.5 ram)

Video input :
Audio input :
Earphone :

0.5_2.0Vp-p
- 15dBs
More than 46dB
More than 43dB

Rotary four-head
1/2 inch

#2_#6
#7_#13
#14_#69

TV VHF High :
TV UHF :
CATV
VHF :
MID btmd :
SUPER band
HYPER band
FM:
r!Cerminal s
Antenna input

ICA 7 JONS

CABLE

,, Designs
without

:
:

AC 120V/60Hz
65W
H:15-3/8" (389mm)

W: 14-1/2" (367mm)
D: 14-7/8" (377mm)
23.1 lbs (10.5kg)
AC 120V/60Hz

:
:

80W
H:17-3/8" (439mm)
W: 19-3/8" (491 ram)
D: 18-3/4" (475mm)
43.0 lbs (19.5kg)

and specifications
are subject to change
notice and without our legal obligation.

• If there is a discrepancy
between
default language will be English.

CHANNEL

languages,

the

DESiGNATiONS

If you subscribe to cable TV, the channels are displayed as 1-125. Cable comptmies often designate chtmnels
with letters or letter-number
combinations.
Please check with your local cable company. The following is a
chart of common cable channel designations.
CATVchannel 5A
TVDisplay

CATVchannel C
TVDisplay

CATVchannel R
TVDisplay

W+l

W+2

W+3

W+4

W+5

W+6

W+7

W+8

W+9

CATVchannelW+10 W+11 W+12 W+13 W+14 W+15 W+16 W+17 W+18 W+19 W+20 W+21 W+22 W+23 W+24
TVDisplay

CATVchannel
W+25 W+26 W+27 W+28 W+29 W+30 W+31 W+32 W+33 W+34 W+35 W+36 W+37 W+38 W+39
TVDisplay 61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
CATVchannelW+40 W+41 W+42 W+43 W+44 W+45 W+46 W+47 W+48 W+49 W+50 W+51 W+52 W+53 W+54
TVDisplay

CATVchannelW+55 W+56 W+57 W+58
TVDisplay

A-5

A-4

A-3

A-2

A-1

W+59 W+60 W+61 W+62 W+63 W+64

100

101

102

103

104

105

CATVchannelW+65 W+66 W+67 W+68 W+69 W+70 W+71 W+72 W+73 W+74 W+75 W+76 W+77 W+78 W+79
TVDisplay

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

CATVchannelW+80 W+81 W+82 W+83 W+84
TVDisplay 121

122

123

124

125
- 27 -

EN
9103

CONTROLES

DE OPERACION

SUS FUNCIONES
CONEXIONES
MODO

INSTALACION

........................
DE ANTENA/CABLE

DE ENTRADA

........

EXTERNA

...........

DE LAS PILAS

PREPARACION

DE CANALES

PRIMERA

..........................

AJUSTE

VEZ

DEL RELOJ

Este
manual
sirve para
los manual
modelos sedemuestra
13" y 19".
A excepci6n
tamente
la misma.
En este
el modelo
de 19".de la apariencia,

.............

POR
31

.....................

la operaci6n

de los (los modelos

es exac-

]

NOTA:
No recomendamos
mando a distancia
ndmero de c6digo
mando a distancia

utilizar mandos a distancia universales,
No todas las funciones
pueden ser controladas
mediante tm
universal.
Si decide utilizar un mando a distancia universal con esta unidad, tenga en cuenta que con el
dado tal vez no se pueda controlar
la unidad. En este caso, p6ngase en contacto con el fubricante del
universal.

-PANELDELANTERO-

12
- CONTROL

REMOTO

3 4

5 6 78910111213

1 Toma de entrada de video (VIDEO)ConEctela
la toma de salida de vNeo de su videoc_mara
u otra

videograbadora.

25
i

WAKEUP
//
ISLE_P //_V FM

POWER

3 .............
C-__

C-_ C_

@ C75 _

videoc_mara

CHANNEL
RETURN

CC_
.....

16,,,,,,,,,,,

,,,,,,
4

D,sp_ UUTE

...........
23
............
9
10

8,,,,,,,,,,,

Botches
de volumen
el nivel del volmnen.

.........
22

................. A

SLOW

A /V)-

Ajustan

de canaies
(CHANNEL
_,/T)POlselos
para seleccionar
los canales deseados para ver o grabar.
6 Ventanilla
sensora
del mando
a distanciaRecibe las sefiales
distancia.

.........../ _AR¸ _

(VOLUME

POlselo para
Pdlselo

5 Botches

7
18-,-,

u otra videograbadora.

Bot6n de la aHmentaci6n
(POWER)encender
y apagar el televisoljvideograbadora.
para activar la grabacidn con temporizador.

,,,,,,,,,,
5

15 ...........C_@ _CVD(gD
@
@
_
@

Toma de entrada de audio (AUDIO)Con0ctela
la toma de salida de audio de su equipo de audio,

Botdn
cinta.

......
21

COUNTER
RESET

parada

infrarrojas
(STOP)-

Botdn de expulsidn
de parada para expulsar
televisor/videograbadora.
Botdn _v

los modos
dfgitos

del mando

POlselo para detener

(EJECT)-P(Ilselo
la cinta del

, Pdlselo para seleccionar
mendde la pantalla.
, P(llselo para introducir

procedentes

en el modo

de ajuste desde

cuando

establezca

el
un

programa.
(Pot cjemplo: Para ajustar
grama de temporizador)

el reloj o establecer

un pro-

J
- 28

ES
0129

- PANEL

TRASERO

27
8 Bot6n de rebobinado
(REW)Plilselo para
rebobinar
la cinta, o para ver la imagen en retroceso
rfipido durante el modo de reproducci6n.
(Btlsqueda
coil rebobinado)
Botdn _1
Plilselo
ticular.

para seleccionar

(Por ejemplo:

un modo

IDIOMA

o ADJUST

9 Botdn de reproduccidn
ciar la reproducci6n.
Bot6n •
• Pfilselo
memlde

para seleccionar
la pamalla.

• Ptilselo

para introducir

desde

14 Compartimiento

un memlpar-

Bot6n

Ptilselo para ini-

dlgitos

de ajuste desde

cuando

establezca

(Por ejemplo:
Para ajustar
grama de temporizador)

el reloj o establecer

seleccione

cuyo mhnero

canales

de tele-

sea superior

al 99, pulse

primero este bot6n, y luego pulse los dos tiltimos
tos. (Para seleccionar
el canal 125, pulse primero
bot6n "+100" y luego el "2" y el "5".)

digiel

16 Bot6n
de menti (MENU)- Ptilselo para visualizar
memlprincipal
ell la pantalla del televisor.

programa.

17 Botdn del visualizador
(DISPLAY)Visualiza el
contador o el ntlmero del canal actual y la hora actual
ell la pantalla del televisor.

un pro-

10 Botdn de avance rfipido (F.FWD)Ptilselo para
avanzar r@idmnente
la cinta, o para ver la imagen ell
avance rfipido durante el modo de reproducci6n.
(Btlsqueda
con avance rfipido)
Botdn I_

18 Botbn

de velocidad

para elegir

de cinta

la velocidad

19 Boton T-PROG. CLEARprograma de temporizador.
Boton

(SPEED)-

de grabacidn

de reposicion

Ptilselo

Pt_lselo

deseada:

SP/SLP.

para cancelar

del contador

(COUNTER

• Cuando establezca un programa (por ejemplo: para
ajustar el reloj o para establecer un programa de temporizador),
ptilselo para determinar
su elecci6n y vaya
al paso siguiente que quiera imroducir.

20 Boton de juego (GAME)- Establece el modo del

• Ptilselo
memide

para determinar
la pamalla.

los modos

21 Boton de cfimera lenta (SLOW)- Pulselo para
activar la reproducci6n a cfimera lenta.

• Ptilselo
ticular.

para seleccionar

un modo

(Por ejemplo:
It

+100-Cuando

visidn por cable

los modos

del videocasete

15 Botones numeradosPtilselos para selecciom, r los
canales deseados
para ver o grabar. Para seleccionar
canales del 1 al 9, pulse primero el botdn (1 y luego el
bot6n 1 a 9.

DE USER)

(PLAY)-

Funcion de seguimientoPulse los botones para
minimizar
el ruido de vkleo (lfneas o puntos ell la pantalla) durante la reproducci6n.

Botdn
grabacidn

IDIOMA

de ajuste
desde

o ADJUST

grabacidn (REC)-

desde

RESET)juego

para iniciar

manual.

Bot6n de grabaci6n
de un toque
la grabaci6n de un toque. ($61o ell el
televisor/videograbadora)
12 Indicador
de grabacion
durante la grabaci6n.
Se enciende ell el modo
temporizador.

(RECORD)-

de espera

(OTR)-

Activa

de entrada

de pausa/imagen

el eontador

extema

fija

al mismo

a 0:(10:(10,
tiempo.

(PAUSE/STILL)-

23 Boton
sonido.

de silenciamiento
(MUTE)Ptilselo de nuevo para recuperar

24 Boton

de retorno

de canal

Silencia el
el sonido.

(CHANNEL

RETURN)Ptilselo para volver al canal anterior. Por
ejemplo, pulsando una vez este bot6n, la visualizaci6n
del canal cambiarfi de 3 (canal actual) a 10 (canal ante-

Parpadea

de la grabaci6n

para reponer

Ptilselo para detener temporalmente
la cinta durante la
grabaci6n o para ver una imagen fija durante la reproducci6n.

DE USER)

Ptilselo

y el modo

22 Botdn

un memipar-

Ptilselo

rior), y al pulsarlo
del 10 al 3.

con

por segunda

vez, el canal

cambiarfi

25 Boton del temporizador
despertador/para
dormir (WAKE-UP/SLEEP)Ajusta el temporizador para despertarse/dormir.
26 Botdn de televisor/modulacion
de frecuencia

13 Toma de auriculares
(EARPHONE)Para conectar los auriculares (no suministrados)
y escuchar ell
privado. La toma es mono y tiene un tamafio de 3,5
lnln.

(TWFM)
27 Cordon

Se puede mostrar el metal principal ell la pantalla del
televisor pulsando mpetidamente
este botdn del televisor/videograbadora.

- Establece el modo FM.
de alimentacionCon&telo

CA estfindar

a la toma de

(120V/60Hz).

28 Terminal de antena (ANT.)- Para conectar una
antena o sistema

de televisi6n

por cable.

ES
(}129

Desde el cable coaxial o
Caja de CATV

sat_lite de 75 ohm del
caja de emisiones vfa

tena combinada de
1
__An
Antena de varilla UHF/VHF
"_
_(inclu/do para solamente 13")
,[[.

VHF/UHF
(uo inclufdo)
VHF
(no inclufdo)

sistema de Cat le

Amena UHF
(no inclufdo)

de
a

de" bm(u° M
AN2 ENA COMYlNADA

[
( AI_I E CON ( ONVERFIDORiDESCODH'I(
ADOR
0 CONVERI IDOR DE EM_SIONES V_A SAIEI II E

l)d;] VHbTUHF

La antena de varilla de VHF/UHF (inclufdo para solamente
13") es desmontable. Inserte el vfistago de la antena en el
agujero de la parte trasera superior del
televisor/videograbadora.
Conecte la varilla de antena de VHF/UHF o la antena combinada de VHF/UHF al terminal ANT. del
televisor/videograbadora.

Si su servicio de televisi6n por cable le suministra un convertidor, o si usted utiliza un sistema de emisiones via
satdlite, usted podrfi utilizar las conexiones bilsicas.
Utilizando estas conexiones, usted tambidn podrfi grabar
canales codificados. Sin embargo, la selecci6n de los
canales deberfi hacerse con el convertidor de televisi6n por
cable con el convertidor de emisiones vfa satdlite. Esto significa que los canales no podnln set cambiados con el
mando a distancia del televisor/videograbadora.
La
grabaci6n inatendida se limim a un canal cada vez.
PARA GRABAR UN CANAL
CODIFICADO/DESCODIFICADO
1. Ajuste el selector de canales del televisor/videograbadora al canal de salida del convertidor de televisi6n por
cable o del convertidor de emisiones vfa satdlite. (Ej.:
CA3)
2. Seleccione el canal que desee grabar de su convertidor
de televisi6n por cable odel convertidor de emisiones
vfa satdlite.

ANTI;NA S 9t';d3{ZgADAS DE VHF/UdIF
En algunos lugares seri necesario utilizar una antena exterior.
CABLE S_N C(}NWER] [DOR/DES( OD_F_CAI)()R
Utilice esta conexi6n si su sistema de televisi6n por cable
se conecta directamente a su televisoffvideograbadora
sin
convertidor.Utilizando esta conexi6n usted podrii:
1) Utilizar el mando a distancia del televisor/videograbadora para seleccionar canales.
2)Programar uno o rolls canales sin codificar para malizar
la grabaci6n automfitica con temporizador.
NOTA: Con esta unidad SOLO se podrfi grabar y ver un
mismo canal al mismo tiempo.

ES
0129

Cercidrese...

Cuando utilice una serial de entrada externa (otra
videograbadora
o una videoc_imara),
conecte los cables de
salida de audio/vfdeo
del equipo de reproduccidn
a las
tomas AUDIO IN/VIDEO
IN de su
televisor/videograbadora.
Y luego pulse el bot6n CHANNEL • o • hasta que "AUX" aparezca en la pantalla.
Usted puede programar
el temporizador
todos los canales que puedan recibirse

• La alimentaci6n
estar conectada.
En el ejemplo

del televisor/videograbadora

de abajo,

FECHA: 7 de mayo
HORA: 5:40 PM

para que explore
en su zona.

1) Pulse el bot6n

pulse

el botdn

en el mando

a distancia.

o STOP/•

para indicar

EFWD/_.

2) Pulse el botdn PLAY/•
o STOP/•
"AJUSTE MANUAL
RELOJ".
1) Abra la tapa del compartimiento
de las pilas del mando
a distancia presionfindola
en el sentido de la flecha.

Luego,

(+/-).
a poner

el bot6n

EFWD/I_.

pulse

el botdn

4) Pulse el botdn PLAY/•
el dfa del rues deseado.

la tapa.

Luego,

pulse

el bot6n

EFWD/_.
o STOP/•
(Ejemplo:

Luego,

el cable de alimentaci6n

televisor/videograbadora

en una toma de CA estfindar.

NOTA: Si aparezcan algunos digitos en el rincdn de la
pantalla, pulse el botdn POWER sin desenclmfar
el cable
de alimentaci6n.

4) Pulse el bot6n PLAY/•
"AUTOPRESELECCION".

o STOP/•

el bot6n

hasta que aparezca

EFWD/I_.

6) Pulse el botdn PLAY/•
o STOP/•
la hora deseada. (Ejemplo:
5, PM)
Luego, pulse el botdn EFWD/_.

hasta que aparezca

7) Pulse el botdn PLAY/•
o STOP/•
el minuto deseado. (Ejemplo: 40)

hasta que aparezca

8) Pulse el botdu MENU en el mando a distancia. Aunque
los segundos no se visualizan,
6sms empiezan
a contar
desde 00 cuando se pulsa MENU en el mando a distancia. Utilice esta funcidn para sincronizar
el reloj con la
hora correcta.

del

2) Pulse el botdn POWER para encender el
televisor/videograbadora.
3) Seleccione
"ENGLISH"
o "ESPAiqOL"
utilizando
botdn EFWD/I_
o REW/_I.
"[ 1" indica el idioma
seleccionado.

pulse

hasta que aparezca
7 - 07)

EFWD/I_.

5) Pulse el botdn PLAY/•
o STOP/•
el afio deseado. (Ejemplo:
2002)

1) Enchufe

para indicar

3) Pulse el botdn PLAY/•
o STOP/•
hasta que aparezca
el rues deseado. (Ejemplo: Mayo - 05)

2) lnserte 2 pilas tamario "AA" en el compartimiento
de las
pilas, en el sentido indicado por las marcas de polaridad
3)Vuelva

pulse

aM:

de 2002

Pulse el botdn PLAY/•
"AJUSTE RELOJ".
Luego,

el iz, loj va a ajlcstarse

deberfi

para serialar

Luego pulse el bot6n EFWD/_.
El sintonizador
explorar_ y memorizar_
todos los canales activos de su _rea.
NOTAS:
• El televisor/videograbadora
distingue entre los canales
de televisi6n
est_ndar y los canales de televisor por
cable.
•

Si desea reproducir
o grabar una cinta ANTES de preajustar el sintonizador,
usted tendril que pulsar el botdn
MENU en el mando a distancia. Para preajustar
nuevo el sintonizador,
consulte "REPETICION
PREPARACI()N
DE CANALES".

de
DE LA

• La unidad de televisor/videograbadora
puede reconocer
los canales de TV como ellos de TV por cable a causa
de los condiciones
de recepci6n. En este caso, pruebe el
preajuste automfitico
de nuevo en los condiciones
finas
de recepci6n.
5) El sintonizador
se para en el canal memorizado
mils
bajo. Si desea recuperar canales seleccionados,
usted
podrfi seleccionar
directamente
el canal deseado con los
botones numerados
del mando a distancia o con los
botones CHANNEL
• o •.

SYLVANIA
LIMITED
FUNAI CORP. will repair tiffs SYLVANIA
or worl¢manship
as l_)llo_vs:
DURATION:

product,

WARRANTY
free of charge

in tile USA in tile event of defect

in materials

PARTS:

FUNAI CORP. will provide parts to re 31ace def_ctiveparts
without charge
tile date of original retail purchase. Two (2) years for Picture Tube. Certain
fi'om this warranty.

for one (1) year from
parts are excluded

LABOR:

FUNAI CORP. will provide
of original retail purchase.

(90) days from tile date

LIMITS

tile labor without

charge

for a period

of ninety

AND EXCLUSIONS:

This warranty is extended
purchase will be required
This warranty

only to the original retail purchaser. A purchase receipt o1"other proof of original
together with the product to obtain service under this warranty.

shall not be extended

to any other person

retail

or transferee.

This warranty is void and of no effect if any serial numbers on the product
or if service was attempted by an unauthorized
service center. This FUNAI
does not apply to any product not purchased
and used in the United States.

are altered, replaced, defaced, missing
CORPORATION
Limited warranty

This warranty only covers failures due to defects in material or workmanship
which occurs during normal use. It
does not cover damage which occurs in shipment,
or failures which are caused by repairs, alterations
or product
not supplied by FUNAI CORR, or damage which results fi'om accident, misuse, abuse, mishandling,
misapplication, alteration,
faulty installation,
improper maintenance,
commercial
use such as hotel, rental or office use of this
product or damage which results fi'om fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAl CORR AND lTS REPRESENTATIVES
OR AGENTS SHALL lN NO EVENT BE LIABLE FOR ANY
GENERAL,
INDIRECT
OR CONSEQUENTIAL
DAMAGES
ARIS1NG OUT OF OR OCCASIONED
BY THE
USE OF OR THE INABILITY
TO USE THIS PRODUCT.
THIS WARRANTY
IS MADE IN LIEU OF ALL
OTHER WARRANTIES,
EXPRESS OR IMPL1ED, AND OF ALL OTHER LIABILITIES
ON THE PART OF
FUNA1, ALL OTHER WARRANTIES
INCLUDING
THE WARRANTY
OF MERCHANTABILITY,
AND FITNESS FOR A PARTICULAR
PURPOSE,
ARE HEREBY DISCLAIMED
BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY
INSPECTIONS
AND REPAIRS MUST BE PERFORMED
BY A FUNA1 AUTHORIZED
SERVICE CENTER. THIS WARRANTY
IS VAL1D WHEN THE UNIT IS TAKEN TO A FUNAI AUTHORIZED SERVICE FACILITY.
IMPORTANT:
THIS LIMITED WARRANTY
GIVES YOU SPECIFIC
LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE, IR AT ANY TIME DURING THE WARRANTY
PERIOD, YOU ARE
UNABLE
TO OBTA1N SATISFACTION
WITH THE REPAIR OF THIS PRODUCT,
PLEASE CONTACT
FUNA1 CORR

ATTENTION:
FUNAI CORR RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.
To locate your nearest SYLVANIA Authorized Service Center or for general service procedure,
please call 1-800-968-3429 or write to the l_llowing:
FUNAI CORPORATION,
Customer Service

PLEASE
Printed

INC.

100 North Street; Teterboro, NJ 07608
Tel :1-800-968-3429
DO NOT SHIP YOUR UNIT TO THE TETERBORO

ADDRESS.

in Malaysia
T5304

0EMN01900
/ 7304UE * * * * *

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 32
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Thu Apr 05 05:42:49 2007
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

SYLVANIA TV/VCR Or DVD Combo Manual L0610693

Navigation menu

Versions of this User Manual:

Views

Navigation