SYLVANIA TV/VCR Or DVD Combo Manual L0610693

User Manual: SYLVANIA SYLVANIA TV/VCR or DVD Combo Manual SYLVANIA TV/VCR or DVD Combo Owner's Manual, SYLVANIA TV/VCR or DVD Combo installation guides

Open the PDF directly: View PDF .
Page Count: 32

\\\

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSON-

NEL.

The cantion marking is located oi1the rear of the cabinet.

THIS SYMBOL INDICATES THAT DAN-

GEROUS VOLTAGE CONSTITUTING A

RISK OF ELECTRIC SHOCK IS PRESENT

WITHIN THIS UNIT,

THIS SYMBOL INDICATES THAT THERE

ARE IMPORTANT OPERATING AND

MAINTENANCE INSTRUCTIONS IN THE

LITERATURE ACCOMPANYING THE

APPLIANCE.

IMPORTANT SAFEGUARDS

l.Read instructions-All the salety and operatiug instructions

should be read belore the appliance is operated.

2.Retain lnstrucfions-The safety and operating iustructions

should be retained for future reference.

3.Heed Warnings-All warniugs on the appliance and iu the

operating instructions should be adhered to.

4.Follow Instructions-All operating and use instructions

should be followed.

5.Cleaning-Unplug TV/VCR lrom the wall outlet belbre

cleaning. Do not use liquid cleaners or aerosol cleaners. Use

a damp cloth for cleaning.

EXCEPTION: A product that is meant lbr uninterrupted

service and, that lot some specific reason, such as the possi-

bility of the loss of an authorization code IL,I"a CATV con-

verier, is not iutended to be unplugged by the user lot clean-

ing or any other purpose, may exclude the ret)rence to

unpluggiug the appliance iu the cleaning description other-

wise required in item 5.

6.Attachments-Do not use attachments not recommended by

the TV/VCR manufacturer as they may cause hazards.

7.Water and Moisture-Do not use this TV/VCR near water-

for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming pool,

and the like.

KAccessories-Do not place this TV/VCR on an unstable cart,

stand, tripod, bracket, or table. The TV/VCR may fan, caus-

ing serious injury to someone, aud serious damage to the

appliance. Use only with a cart, stand, tripod, brackeL or

table recommended by the manufacturer, or sold with the

TV/VCR. Any mounting of the PORTABLE CART WARNING

appliance should follow the manu-

facturer's instructions and should

use a mounting accessory recom-

mended by the manufacturer. An

appliance and cart combination

should be moved with care.

Quick stops, excessive force, and

uneven surhlces may cause the

appliance and cart combiuation to

overturn.

AMEUBLES- Cet appareil ne doit _tre *_o_o_,,_o_

LESC_MpoSaNTES

APPAREIL ET MEUgLE A ROO£E_ES

plac6 clue sur un meuble (avec ou sans

roulettes) recommand_ par le fabricant.

Si vous l'installez sur tul meuble 5

roulettes, d@lacez les deux ensembles

avec pr&aution. Un an'at brusque, l'u-

tilisation d'une force excessive et des surhtces il'r_guli_res

risquent de d&tabiliser l'ensemble et de le renverser.

9, Ventilation-Slots and openings in the cabinet and the back

or bottom are provided for ventilation and to ensure reliable

operation of the TV/VCR and to protect it from overheat-

ing, and these openings must not be blocked or covered.

The openings should never be blocked by placing the

TV/VCR on a bed, sofa, rag, or other similar sudace. This

TV/VCR should never be placed near or over a radiator or

heat register. This TV/VCR should not be placed in a built-

in installation such as a bookcase or rack unless proper

ventilation is provided or the manufacturer's instructions

have been adhered to.

Ill.Power Sources-This TV/VCR should be operated only

from the type of power source indicated on the marking

label. If you are not sure ol the type ol power supply to

your home, consult your appliance dealer or local power

company. For TV/VCRs intendedto operate ll"ombattery

power, or other sources, refer to the operating instructions.

ll.Grounding or Polarization-This TV/VCR is equipped

with a polarized alternating-current line plug(a plug having

one blade wider than the other). This plug will fit into the

power outlet only one way. This is a salety leature. If you

are unable to insert the plug lully into the outlet, try revers-

lug the plug. II the plug should still Failto fit, contact your

electrician to replace your obsolete outlet. Do not deteat the

salety purpose of the polarized plug.

12.Power-Cord Protecfion-Power-supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying par-

ticular attention to cords at plugs, convenience receptacles,

and the point where they exit lrom the appliance.

- 2 - EN

9103

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

GROUND

LEAD IN

WIRE

ELECTRIC

SERVICE

NEC- NATIONAL ELECTRICAL CODE

$2898A

. ANTENNA

DISCHARGE UNIT

(NED SECTION 810-20)

GROUNDING CONDUCTORS

INEC SECTION 810-21)

GROUNDCLAMPS

POWER SERVICE GROUNDING

_:.,dlr_ ELECTRODE SYSTEM

(NEC ART 250, PART R)

13.Outdoor Antenna grounding-If an outside antenna or

cable system is connected to the TV/VCR, be sure the

antenna or cable system is grounded so as to provide some

protection against voltage su:_.es and built-up static

charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information with respect to

proper grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna discharge unit,

size of grounding conductors, location of antenna-discharge

unit, connection to grounding electrodes, and requirements

for the grounding electrode. (Fig. A)

14.Lightning-For added protection for this TV/VCR receiver

during a lightning storm, or whet: it is left unattended and

unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system. This will

prevent damage to the TV/VCR due to lightning and

power-line surges.

15.Po_er Lines-An outside antenna system should not be

located in the vicinity of overhead power lines or other

electlic light or power circuits, or where it can fall into

such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep from

touching such power lines or circuits as contact with the:::

might be fatal.

16.Overloading-Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry-Never push objects of any kind

into this TV/VCR through openings as they may touch dan-

gerous voltage points or short out parts that could result in

a fire or electric shock. Never spill liquid of any kind on

the TV/VCR.

18.Servicing-Do not attempt to service this TV/VCR yourself

as opening or removing covers may expose you to danger-

ous voltage or other hazards. Refer all servicing to quali-

fied service personnel.

19.Damage Requiring Service-Unplug this TV/VCR from

the wall outlet and refer servicing to qualified service per-

sonnel under the following conditions:

a. When the power-supply cord or plug is dan:aged or frayed.

b. If liquid has been spilled, or objects have fallen into the

TV/VCR.

c. If the TV/VCR has been exposed to rain or water.

d. If the TV/VCR does not operate normally by following the

operating instructions. Adjust only those controls that ale

covered by the operating instructions, as improper adjust-

ment of other controls may result in damage and will often

require extensive work by a qualified technician to restore

the TV/VCR to its uom:al operation.

e. If the TV/VCR has been dropped or dmnaged in any way.

f. When the TV/VCR exhibits a distinct change in perfor-

mance-this indicates a need tiar service.

20.Replacement Parts-When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer that have the same character-

istics as the original part. Unauthorized substitutions may

result in fire, electric shock, injury to persons or other haz-

ards.

21.Safety Check-Upon completion of any service or repairs to

this TV/VCR, ask the service technician to perform routine

safety checks to determine that the TV/VCR is in proper

operating condition.

22.Heat-This TV/VCR product should be situated away from

heat sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce heat.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WiDE BLADE OF PLUG TO WiDE SLOT, FULLY

INSERT.

ATTENTION: POUR E_VITER LES CHOC I_LECTRiQUES, INTRODUIRE LA LAME LA PLUS LARGE DE

LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND.

- 3 - EN

9103

For safe operation and satisfactory performance of

your TV/VCR, keep the following in mind when

selecting a place for its installation:

,, Shield it from direct sunlight and keep it away

from sources of intense heat.

,, Avoid dusty or humid places.

,, Avoid places with insufficient ventilation for proper

heat dissipation. Do not block the ventilation holes

at the top and bottom of the unit. Do not place the

unit on a carpet because this will block the ventila-

tion holes.

,, Install unit in a horizontal position.

,, Avoid locations subject to strong vibration.

,, Do not place the TV/VCR near strong magnetic fields.

,, Avoid moving TV/VCR to locations where temper-

amre differences are extreme.

,, Do not handle the power cord with wet hands.

,, Do not pull on the power cord when disconnecting

it from tm AC wall outlet. Grasp it by the plug.

,, If, by accident, water is spilled on your unit, unplug

the power cord immediately trod take the unit to an

Authorized Service Center for servicing.

,, Do not put your fingers or objects into the

TV/VCR cassette holder.

,, Do not place tmything directly on top of the unit.

Moisture condensation may occur inside the unit

when it is moved from a cold place to a warm place,

or after heating a cokl room or under conditions of

high humidity. If a tape is played in a TV/VCR

which has moisture, it may damage the tape and

TV/VCR. Therefore if condensation occurs inside the

unit, tuna the POWER button on and allow at least 2

hours for the unit to dry out.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized recording or use of broadcast televi-

sion programming, video tape, fihn or other copy-

righted material may violate applicable copyright

laws. We assume no responsibility for the unautho-

rized duplication, use, or other acts which infringe

upon the rights of copyright owners.

FCC WARNING- This equipment may gener-

ate or use radio frequency energy. Changes or

modifications to this equipment may cause

harmful interference unless the modifications

are expressly approved in the instruction man-

ual. The user could lose the authority to oper-

ate this equipment if an unauthorized change

or modification is made.

This eqtfipment has been tested mid found to com-

ply with the limits for a Class B digital device, pur-

sutmt to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses, and cm3radiate

radio frequency energy and, if not installed mid

used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be deter-

mined by turning the equipment off and on, the

user is encouraged to try to correct the interfer-

ence by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment

and receiver.

3) Connect the equipment to an outlet on a circuit

different from that to which the receiver is con-

nected.

4) Consult the dealer or an experienced radio/TV

technician for help.

The serial number of this product may be found on the back of the unit. No other TV/VCR has the same serial

number as yours. You should record the number and other vital infommtion here and retain this book as a per-

manent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

- 4 - EN

9103

TABLE OF CONTEN FS

[] IMPORTANT SAFEGUARDS ............. 2

[] PRECAUTIONS ........................ 4

[] FEATURES ............................ 6

[] SUPPLIED ACCESSORIES ............... 6

[] OPERATING CONTROLS AND FUNCTIONS 7

[] PREPARATION" FOR USE ................ 9

ANTENNA/CABLE CONNECTIONS ....... 9

EXTERNAL INPUT MODE .............. 10

INSTALLING THE BATTERIES ........... 10

[] SET UP FOR USE ..................... 10

CHANNEL SET UP FOR THE FIRST TIME .10

CLOCK SET UP (AUTO /MANUAL) ...... 11

CHANNEL SET UP AGAIN .............. 12

DELETING (OR ADDING) CHANNEL ..... 12

SELECTING THE LANGUAGE ........... 13

DAYLIGHT-SAVING TIME .............. 13

[] TV OPERATION ....................... 14

WATCHING A TV PROGRAM ............ 14

GAME MODE ......................... 14

DEGAUSSING ........................ 14

PICTURE CONTROL ................... 14

CLOSED CAPTION SYSTEM ............ 15

V-CHIP SET UP ........................ 15

FM MODE ............................ 17

[] PLAYBACK ........................... 17

NORMAL PLAYBACK .................. 17

AUTO REPEAT PLAYBACK ............. 18

SEARCH ............................. 18

SLOW MOTION ....................... 19

RENTAL PLAYBACK ................... 19

VERTICAL HOLD CONTROL ............ 20

STILL PICTURE ....................... 20

TRACKING ADJUSTMENT .............. 2(I

[] RECORDING ......................... 20

NORMAL RECORDING ................. 20

OTR (One Touch Recording) .............. 21

TIMER RECORDING ................... 21

TIMER PROGRAM EXTENSION ......... 22

HINTS FOR AUTOMATIC TIMER

RECORDING ......................... 23

AUTO RETURN ....................... 23

WAKE UP TIMER ...................... 23

SLEEP TIMER ......................... 24

[] COPYING A VIDEO TAPE ............... 24

[] ON SCREEN DISPLAY ................. 25

[] SPECIAL FEATURES .................. 25

REAL TIME TAPE COUNTER ............ 25

AUTO REWIND-EJECT ................. 25

[] MAINTENANCE ....................... 25

[] TROUBLESHOOTING GUIDE ........... 26

[] SPECIFICATIONS ..................... 27

[] CABLE CHANNEL DESIGNATIONS ...... 27

[] WARRANTY ................... Back Cover

A NOTE ABOUT RECYCLING

This product's packaging materials are recyclable and ctm be reused. Please dispose of any materials in

accordtmce with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accor&mce with your local regula-

tions concerning chemical wastes.

- 5 - EN

9103

,, Rotary 4-head Record/Playback System-Four

heads ensure excellent picture quality trod special

effects playback.

•Index Search-Fast-A_rwards to start of next recording.

• Slow Motion-View recorded program at slower

thtm normal speed.

• Infrared remote control

•Bilingual on screen menu display selectable in

English or Spanish

,, Real time counter-This shows the elapsed record-

lug or playback time in hours, minutes, trod sec-

onds. The "-" indication will appear when the tape

is rewound further than the tape counter position

"0:00:00".

,, 181 channel capability PLL frequency synthesiz-

er tuner with direct station call-(A converter may

be necessary to view scrambled cable channels.)

,, Auto Clock Setting-Allows you to set the clock

from a PBS broadcast station.

,, Closed caption system-You may view specially

labeled (cc) TV programs, movies, news, prere-

corded tapes, etc. with either a dialogue caption or

text display added to the program.

,, Game mode-Automatically sets exterual input

mode and allows the TV/VCR display to be suit-

able for use with TV games.

,, Auto power on and off system-Automatically

turns on the TV/VCR when you insert the cassette,

turns off after auto-rewind, trod ejects when the

beginning of the tape is reached.

•Auto rewind when the end of a tape is

reached-This function doesn't occur when using

timer recording.

,, 2Step picture search operation-You can view a

video program at a high speed or super high speed

in either a forward or reverse direction in LP and

SLP mode. For SP mode only high speed.

•Three different playback tape speeds : SP/LP/SLP

•Two different recording tape speeds : SP/SLP

,, Auto Head Cleaner-Automatically cleans video

heads as you insert or remove a cassette.

=Zero Return-The tape returns to counter of

0:00:00 by rewinding or fast forwarding.

•Still-"Freeze" the picture at any time, for close

viewing of a particular scene. Only tapes recorded

in SLP mode will show a fairly clear picture.

•Digital Auto Tracking (DTR)-Automatically

adjusts the tracking for each tape you play.

•Rental play mode-Improves playback picture

quality from wom tapes, such as rental tapes.

,, Auto repeat-Allows you to repeat the playing of a

tape indefinitely without pressing the PLAY button.

,, Time search-Lets you set the TV/VCR to advance

the tape by entering the desired playback time you

want to skip.

,, OTR (One Touch Recording)-Instant timed

recording from 30 to 480 minutes is possible at the

push of the REC/OTR button.

•1 Year, 8 events (including Daily and Weekly

Timer Recording)-The built-in timer allows you to

record up to 8 programs at different times on dif-

ferent channels up to 1 year in advance. The Daily

timer allows recordings to be made of daily broad-

casts, mad the Weekly timer allows recording to be

made once a week up to the end of the tape.

• Auto return-After timer recording is finished, the

TV/VCR can retum to the begiuniug of the record-

lug.

,, Wake-up/Sleep timer-Allows you to have the

TV/VCR automatically tuna on or off at a desired

time.

,, Timer Program Extension-Allow you to shift the

time schedule for automatic timer recording.

,, V-CHIP-Enables parents to prevent their children

from watching inappropriate material on TV.

•FM mode-Allows you to listen to the FM radio.

SUPPL ED ACCESSORIES

Remote Control Unit 2 AA Batteries Rod Antenna (13" model only) ]

PA TNO ;1 PA TNO 0 MN00673o i I

U0EMN01599 or0EMN01755) _ o]

• If you need to replace these accessories, please refer to the PART NO. under the illustrations trod call 1-800-

968-3429.

• Depending on your antenna system, you may need different types of Combiners (Mixer) or Separators

(Splitter). Contact your local electronics store for these items.

,, We do not recommend the use of universal remote controls. Not all of the functions may be controlled with

a universal remote control. If you decide to use a universal remote control with this unit, please be aware

that the code number given may not operate this unit. In this case, please call the manufacturer of the uni-

versal remote control.

- 6 - EN

9103

OPERATING CONTROI S AND FUNCTIONS

This manual covers 13" and 19". The operation of the two models are exactly the same except th 4

ppearance. 19" model is illustrated in this manual. |

-TV/VCR FRONT PANEL -

- REMOTE CONTROL -

1 2 3 4 5 6 78910111213 14

..........

15 ..........

16 ........

_CZp C_ C_ O._

CD CD _ _

"OG@_

DISPLAY MUTE (_

RECORD • SPEED PAUSDSTILL

*..O ;_;;_TCD @....

........................_LEAR(NN) slow

......... f

...............25

,,,,,,,,,,,,,26

,,,,,,,,,,,24

--5

--4

,,,,,,,,,,,,,23

,,,,o,,,,,,10

,,,-,22

,,,,,,21

1VIDEO input jack- Connect to the video output

jack of your video camera or tmother VCR.

2 AUDIO input jack- Connect to the audio output

jack of your audio equipment, video camera or

another VCR.

3 POWER button- Press to turn TV/VCR oll trod

off. Press to activate timer recording.

4VOLUME A /V buttons- Adjust the volume level.

5CHANNEL A /V buttons- Press to select the

desired channels for viewing or recording, listening

of FM radio.

You may display the main menu on tile TV screen

by pressing repeatedly this button on the TV/VCR.

TRACKING function- Press to minimize video

'noise' (lines or dots on screen) during playback or

Slow mode. (See page 2(I.)

6Remote Sensor Window- Receives the infrared

signals from the remote control.

7 STOP button- Press to stop the tape motion.

EJECT button- Press in the Stop mode to remove

tape from TV/VCR.

_" button-

,, Press to select setting modes from the on screen

menu.

®Press to enter digits when setting program.

(for example: setting clock or timer program)

8 REW button- Press to rewind the tape, or to view

the picture rapidly in reverse during playback

mode. (Rewind Search)

button-

,, Press to select a mode from a pallicular menu.

(for example: LANGUAGE or USER'S SET UP)

- 7 - EN

9103

- REAR VIEW -*

9PLAY button- Press to begin playback.

•button-

,Press to select setting modes from the on screen

IllelllJ.

,, Press to enter digits when setting program

(for example: setting clock or timer program)

10 F FWD button- Press to rapidly adwmce the tape,

or to view the picture rapkl]y in forward during

playback mode. (Forward Search)

I_ button-

,When setting program (for example: setting clock

or timer program), press to determine your selec-

tion and proceed to the next step you want to input.

• Press to determine setting modes from on screen

menu.

,, Press to select a mode from a parlicular menu.

(for example: LANGUAGE or USER'S SET UP)

11 REC button- Press for manual recording.

OTR button- Activates One Touch Recording.

(only on the TV/VCR)

12 RECORD indicator- Flashes during recording.

Lights up in the Stand-by mode for Timer Recording.

13 EARPHONE jack- Connects to earphones (not

supplied) for personal listening. The size of jack is

1/8" monaural (3.5ram).

14 Cassette compartment

15 Number buttons- Press to select desired channels

for viewing or recording. To select channels from

1 to 9, first press the 0 button trod then 1 to 9.

+100 button-When selecting cable channels which

are higher than 99, press this button first, then press

the last two digits. (To select channel 125, first press

the '% 100" button then press "2" and "5").

16 MENU button- Press to display the main menu on

the TV screen.

17 DISPLAY button- Display the counter or the cur-

rent channel number and current time on the TV

screen. (See page 25.)

27 28

18 SPEED button- Press to choose the desired

recording speed:SP/SLR

19 T-PROG. CLEAR button- Press to cancel a setting

of timer program. (See page 23.)

COUNTER RESET button- Press to reset counter

to 0:00:00.

20 GAME button- Sets the game mode _md external

input mode at the same time. (See page 14.)

21 SLOW button- Press to start slow motion playback.

22 PAUSE/STILL button- Press to temporarily stop

the tape during the recording or to view a still pic-

ture during playback.

Frame Advance function- Press to adwmce the

picture one frame at a time during Still mode.

23 MUTE button- Mutes the sound. Press it again to

resume sound.

24 CHANNEL RETURN button- Press to go back to

the previously viewed chmmel. For example,

pressing this button once will ch_mge ch_mnel dis-

play from 3 (present channel) to 10 (previously

viewed ch_mnel), and pressing it a second time

will return from 10 to 3.

25 WAKE UP/SLEEP button- Sets the Wake up or

Sleep Timer. (See page 23 and 24.)

26 TV/FM button- Set the FM mode.

27 Power cord- Connect to a sttmdard AC outlet

(120V/60Hz).

28 ANT. terminal- Connect to an antenna or cable

system.

- 8 - EN

9103

PRERhRAT ON FOR USE

From Cable System or I _

_ Satellite Dish _ _ _ _ VHF/UHF Antenna

batellite box or _ jp, _ Rod Antenna " _Not su_lie@

Cable Box [ _ _,_./_/ _ (Supplied with 13" model only) i ' _'I-, /

I II h _,r .......... ff I[ I_ (Not supplied)

From I _ -- !'] _J / UHF Antenna

Cable Sysb m I 1111 2L _LI_IIII or_. / (Not supplied)

I I/ll llll /

I VHF/UHF /

[/_ or Combiner /

"_..--:_q?........._ _ (Not supplied) l II

75-ohm Coaxial °r| I _" I _q

Cable (N°t supplied) I [ y [ --_:_"_ ........................................................................................................................................;

,cl]q},_[ _ or Flat twin-lead cable

VHF/UHF COM?_I/%WD A/V2 E/\_WA

The VHF/UHF Rod Antenna (supplied with 13"

model only) is detachable, hlsert the stem of the

antenna into the hole on the upper-back portion of

the TV/VCR.Connect the VHF/UHF Rod Antenna or

VHF/UHF Combination Antenna to the ANT. termi-

nal of the TV/VCR as shown in the diagram. For the

best reception, fully extend the VHF/UHF Rod

Antenna and make the necessary adjustments. (Avoid

touching the top section when adjusting.)

NOTE:

Before plugging the Rod antenna into tmtenna termi-

nal, check that the pin is not bent. If it is bent,

straighten the pin as illustrated, then plug the pin into

antenna terminal.

Bent pin

VHFIUH_ _SEI_4 RATE A NTR/\"/%4S

In some areas it will be necessary to use tm outdoor

alltellna.

CAYLE W17770U? CONVERTER/

DESCRAMBLti'R BOX

Use this connection if your cable system connects

directly to your TV/VCR without a converter box.

By using this connection you can:

1) Use the TV/VCR remote to select chtmnels.

2) Program one or more unscrambled chtmnels flw

Automatic Timer Recording.

NOTE: This unit will ONLY record _md view the

same channel.

2.... :' _,

(,ABLA _H H(,ONVLRZ I_R/

DA,NCRAMBL{:N Y_OX OR SAX ELLITL

Cable Plug

(Needs to be straightened) (Straight pin)

NOTE:

The connection of an indoor antenna may not always

give acceptable TV reception.

If your cable service supplies you with a converter

box or if you use a satellite system, you ctm use the

basic connection shown in the diagram.

By using this connection you ctm also record scram-

bled ch_mnels. However, channel selection must be

made with the converter box or satellite box. This

metros that channels ctmnot be changed using the

TV/VCR Remote Control. Unattended timer record-

ing is limited to one channel at a time.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connect-

ed to the grounding system of the building as close to the point of cable entry as practical.

- 9 - EN

9103

TORECORDA SCRAMBLED/UNSCRAMBLED

CHANNEL

1) SettheTV/VCRchtmnelselectortotheoutput

chtumeloftheCableConvenerBoxorSatellite

Box.(Example:CH3)

2)SelectthechtumeltorecordfromyourCable

ConverterBoxorSatelliteBox.

When using an extemal input signal (another VCR or

video camera), connect the player's audio/video out-

put cables to the AUDIO IN/VIDEO IN jacks of

your TV/VCR. Then press the CHANNEL • or •

button until "AUX" appears on the screen.

NOTE: "AUX" is found below the

lowest memorized channel. AUX

(Example: CH2)

1)Open the battery compartment cover by pressing

the cover on the remote unit in the direction of the

arrow.

2)Insert 2 "AA" penlight batteries into the battery

comparlment in the direction indicated by the

polarity (+/-) markings.

3)Replace the cover.

SET UP F©R USE

You can program the tuner to scan all the chtmnels you receive in your area.

NOTE: Chmmel memory programming is NOT needed when connected to a cable box or satellite box. Just

select the TV/VCR channel selector to the output ch_mnel of the cable box or satellite box (Ex CH3). Then

select the ch_mnel to be viewed on the Cable Box or Satellite Box.

Plug the TV/VCR power cord into a _-_

standard AC outlet. F

NOTE:

If some digits appear in the comer of

the screen, press the POWER button

without unplugging the power cord.

2"_"umo_ the "W/'VCR

Press the POWER button to turn on the TV/VCR

Sek_ot'_E_/GUSW'oir 'E!!!SRA¢_OL"

Select "ENGLISH" or ....

ESPANOL =Span sh using the ...... A_

[EN G L_SIq] ES pAIq OL

EFWD/_ or REW/'_I button. "[ 1"

indicate the selected language. A........

SET UP

LANGUAGE

[ENGLISH] ESPANO_

AUTO pRESET

4IBegb}auto prese_

Press the PLAY/• or STOP/• but-

ton to point to "AUTO PRESET".

Then press the EFWD/I_ button.

The tuner sctms and memorizes all

active channels in your area.

NOTES:

oThe TV/VCR distinguishes between sttmdard TV

ch_mnels and cable ch_mnels.

If you want to play or record a video tape

BEFORE presetting the tuner, you must press the

MENU button on the remote control. To preset the

tuner again, see "CHANNEL SET UP AGAIN" on

page 12.

The TV/VCR may memorize TV charnels as

CATV channels if reception conditions are poor. If

this happens, try the AUTO MEMO action again

when reception conditions are better.

5After scav_i_g

The tuner stops on the lowest memorized channel.

If you wtmt to recall the selected chtmnels, you can

select the desired channel directly with the remote

control number buttons or CHANNEL • or •button.

10 EN

9103

T(2 SELECT A D£'SH?ED CHA NN£%

You call select the desired channel by using the

CHANNEL • or • button or directly pressing the

number buttons on the remote control.

Note for using the number buttons:

• When selecting cable channels which are higher

than 99, press the +100 button first, then, press the

last two digits. (Example: to select channel 125,

first press the +100 button then press "2" and "5").

• You must proceed single-digit chalmel numbers

with a zero (Example: 02 ... 09).

'f SeI®e{ SET"T_NG CLOCK"

Press the MENU button on the

remote control.

Press the PLAY/• or STOP/• but-

ton to point to "SETTING

CLOCK".

Then, press the EFWD/II_ button.

TIMER PROORAMM_NG

PICTURE CONTROL

SETTING CLOCK

CHANNEC SET UP

USER'S SET UP

VaSH_p SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

_NDEXSEARCH

2Set 'AUTO CLOCK" to [ONIII .......... _ .....

Press the EFWD/I_ or REW/'_I ................. EoNI.....

AUTO CLOCK CH [AOT()]

button repeatedly until [ONI ................

appears, os, Ecru

Set the clock accurately for proper automatic timer

recording. If the Public Broadcasting Station (PBS)

is available in your area, follow "AUTO CLOCK

SETTING". If it is not, follow "MANUAL CLOCK

SETTING".

AUTO CLOCI( SE_ TING

You call have the TV/VCR set the clock automatical-

ly by using the Public Broadcasting Station (PBS)

channel in your area. Once you have set the clock by

using the following procedure, the TV/VCR will

automatically monitor the correct time alld date

being broadcast by the PBS station in your area,

using a new service called Extended Data Service

(XDS).

Make sure ...

•TV/VCR power must be turned on.

,, Confiml that the antenna connections are correct.

,, The cable converter box nmst be turned on if your

TV/VCR is connected directly to it. (See NOTES:

,, The chalmel is properly set in advance.

NOTES:

,, Auto clock setting only needs to be set once. But it

can be done again if the clock's time has become

incorrect for some reason.

• If the TV/VCR is connected directly to a cable

converter box or satellite box, the local PBS station

must be selected on the cable box itself, al3d the

TV/VCR must be set to the output chalmel of the

cable converter box or satellite box (usually chan-

nel 3 or 4), to be able to set up or correct the clock

automatically.

If you do not know what your local PBS station is,

then follow "Manual Clock Settings".

The TV/VCR calmot control the channels of the

cable converter box or satellite box.

II!!!!!_%te_'the cha_w}e_ _umber for the PBS static#

Press the PLAY/• or STOP/_' but-

ton to point to "AUTO CLOCK

CH".

Then press the EFWD/_ or

REW/'_I button until the channel

number for your local PBS station

appears.

....i..........EoFF1]

AUTOO_OCK {o_

. AmOCLOCKc. i_u%]

MANUALCLOCK SET

If you do not know the PBS channel number, leave it

set to [AUTOI which is located before [21. The

TV/VCR will search automatically all available chall-

nels for the local PBS station, and will select that

chalmel.

4 Exit the Au_.o Clock Set[ii_ag

Press the MENU button o13the remote control to

return to TV mode.

_' '["orr_off the TV/VCF_

Turn the TV/VCR off. The Auto Clock functions

automatically while the TV/VCR is off.

lf you choose [AUTO],

• The TV/VCR must search until the PBS channel is

found. It must scan earl1 channel for a couple of

seconds to detemdne if that channel is transmitting

the XDS signal.

• If the time that is automatically set by this selected

PBS station is incorrect, it may not be your local

PBS station, but one from a different time zone.

Or if no chalmel is broadcasting the XDS signal in

your area, no time will show. In these cases, you

must malmally enter the correct local PBS station,

or set the clock manually alld turn off the Auto

Clock Setting feature.

MA NgiA L CLOCK S£'TT_NG

Make sure ...

• TV/VCR power must be turned on.

In the example below, the clock is to be set to:

DATE May 7th, 2002

SETTING TIME 5:40PM

l l EN

9103

'_ _'eleet SE'I"T_NGCLOCK" (....

@ TIMEFt pRO@FtAMM_N@

1piCTURE GONTFtOL

Press the MENU button on the I,- ...........

/CHANNEL SET UP

1 P tl PLAY/A | .... ......

remote contro . Fees le v.c._psFup

LANGUAGE /ENGUSH]

or STOP/_' button to point to SET- | ZERO°A.....RETU_,EO<

TING CLOCK". ( ..........

_NDEXSEA,OH

Them press the EFWD/I_- button.

2oeleet MANUAL CLOCK ............

SET' | ........ Eo.1

AUTO GLOCK OH [AUTO]

Ay MANUAL CLOGK SET

Press the PL /A or STOP/_' but- ["

ton to point to MANUAL CLOCK l ....

SET".

Then, press the EFWD/_ button.

Sellect the month .............

Press the PLAY/A or STOP/_' but- Mo_.........,

ton until your desired month

appears. (Example: May --+ (15) ..........

Then, press the EFWD/_- button.

Select the day .............

Pressthe PLAY/A or STOP/T but....... _,,, ....

0 s

ton until your desired day appears. ,....

(Example: 7th --+07) ..........

Then, press the EFWD/I_ button.

5 Select the year .... A........

Press the PLAY/A or STOP/V but- _.......... _#

ton until your desired year appears. 0.................

(Example: 2002) ..........

Then, press the EFWD/I_ button.

GSelleet the Ihour ....A........

Press the PLAY/A or STOP/_' but .............

ton until your desired hour appears. 0...........

(Example: 5. PM) .o_........

Then, press the EFWD/_ button.

7Selleet the mixture .... A........

Press the PLAY/A or STOP/_' but .............

ton until the desired minute appears. 0...........

(Example: 40) ..........,

0s 40 PM

NOTE:

When unplugging the AC cord or if there is a power

failure for more than 3 seconds, you may have to

reset the clock.

_0 CHA NGE CLOC£ SE7 77NG

If you want to change the clock,

1)Follow steps [11and [21.

2)Select where you wmlt to change using the

EFWD/_ or REW/-_I button.

3)Enter correct numbers using the PLAY/A or

STOP/V button.

4)Press the MENU button on the remote control to

stan the clock.

PLEASE NOTE:

If there is no local PBS station in your area or on

your cable system, select "AUTO CLOCK" and press

the EFWD/_ or REW/'_I button to tum [OFFI this

function. Then you can manually adjust the clock.

Make sure ...

,, Press the POWER button to turn on the TV/VCR.

'_ Select 'CHANNEL SIETUP_'

Pressthe MENU button on the ...............

PICTURE GONTROk

remote control, s_=,_o_oo_

OHANNEL S_T UP

USER'S SET UP

Press the PLAY/_ or STOP/_' but ............

LANgUAgE /BNGUSH]

ton to point to "CHANNEL SET _o.......R_TO_._°<

T_M_ S_AROH

UP". ...........

Then, press the F.FWD/II_ button.

2 IBegi_ auto preset ............

Press the PLAY/A or STOP/_' but- A.......... .v)

ton to point to "AUTO PRESET". A.........

Then, press the F.FaND/II_ button.

The tuner scans and memorizes all

the active channels in your area.

After semsni_sg

The tuner stops on the lowest memorized channel.

Start the clock ...... ]

Press the MENU button on the

remote control.

Although seconds are not displayed,

they begin counting from 00 when

you press the MENU button on the remote control.

Use this feature to synchronize the clock with the

correct time.

The channels you no longer receive or seldom watch

can be deleted from the memory. (Of course, you

can add the deleted channel into the memory again.)

9103

'_ Select ONANNEL SET UP"

Press the MENU button on the ....

remote control. P_O_O_Er_MERP_O_R_,_CONTRO_

SEtTiNG CLOCK

Press the PLAY/A or STOP/• but- O_ER'S°...........SETO_

v chip SET UP

ton to point to "CHANNEL SET o_,,o,_...... _o_E.......

ZERO RETURN

UP". ..........

IND[X STARCH

Then, press the EFWD/I_ button.

2Se_ect"ADI[M)IELETE OH' o...........

Press the PLAY/A or STOP/V but ............. (,v>

ton to point to "ADD/DELETE ..........

CH".

Press the EFWD/_ button.

2Select "ENGUSH" or "ESPANOL"

Select "ENGLISH" or "ESPANOL"= Spanish using

the EFWD/_ or REW/_I button.

Exit the Lal_j_agje mode

Press the MENU button on the remote control to

return to TV mode.

NOTE: If for some reason the menu is in Sptmish,

press the MENU button on the remote control, press

the PLAY/A button to point to "IDIOMA

[ESPANOLI", then press the EFWD/I_ button, then

press the MENU button on the remote control.

IEr}terthe deeiired eha_}_el _mlber

Press the PLAY/A or STOP/• but-

ton until your desired channel num-

ber appears. (You can also use the o8

number buttons or the CHANNEL

A/'• button to enter it.) (Example: ..........

CH8)

4 Delete (or add} it from (i_to) memo&

Press the EFWD/_ or REW/-_I button. The channel

number ch_mges to light red. The channel is deleted

from memory.

,, To delete another channel, repeat steps [31 mad [41.

,, If you press the EFWD/_ or REW/_I button

again, the chmmel is memorized again.

Added channel: Light blue.

Deleted channel: Light red.

Exit tlhe eham3e_eet_spmode

Press the MENU button o13the remote control to

returns to TV mode.

NOTE: To confirm that channel(s) has been deleted

or added, press the CHANNEL • or • button.

Make sure ...

,, Press the POWER button to turn o13the TV/VCR.

NOTE: This function effects only the language on

the screen menu and not the audio source.

'] Select 'LANGUAGE" (.....

T_MER pFtOGRAMMING

Press the MENU button on the _E_,,,_...............o_oo,

OHANNEL SET UP

remote control, os_R.ss_up

v °l_]p SET UJ_ /

EANG/IA_3_ ENGLtSH] .....

Press the PLAY/• or STOP/V but........ z_o_Fo_/°_3

TrUESEARCH

ton to point to "LANGUAGE". ............

Select flais feature and the TV/VCR's clock automati-

cally will adwmce one hour in April, then reverse one

hour in October.

When Daylight-Saving Time is ON, the clock will

ch_mge automatically as follows:

,, First Sunday of April : At 2 AM the clock imme-

diately ch_mges to 3 AM. Any timer programming

you have set to occur between 2 AM and 3 AM

will not record.

,, Last Sunday of October : At 2 AM the clock

immediately ch_mges to 1 AM.

Make sure ...

,, Press the POWER button to turn on the TV/VCR.

'_ Seleet"SETT_IIqGOLOOK"

Pressthe MENU button on the ....

TIMER PROGRAMMING

remote control. _,c_o<_oo_o_

SE_ING GLOOK

CHANNEL SET UP

Press the PLAY/• or STOP/• but ..... v_.,_......s_,oP

LANGUAGE [ENGMSH]

ton to point to "SETTING CLOCK". o_......_o<

ZERO RETURN

TIM_ SEARCH

Then, press the EFWD/_ button ........ _o.

2Set ©oSW (Dayliight-SavhsgTime} to [ONI

ton to point to "D.S.T.". ......... _o_

Then, press the EFWD/I_ or ........... _o,o3

MANUAL °LOOK SET

REW/'_I button until tONI appears, o......... _&:

Exit tlhe ©ayligh_, Savii_}g "l"ime mode

Press the MENU button on the remote control to

return to TV mode.

TO CA NCEL 7HE DA YLIGHTmSA V1NG

Repeat steps [11 to [21, select [OFFI using the

EFWD/I_ or REW/-_ button.Then, press the MENU

button o13the remote control to return to TV mode.

13 EN

9103

TV OPERATION

'f '/"t_rr_oilsthr_ TV/VCF_

Press the POWER button to turn on the TV/VCR.

2Selk_etth_,_charm÷l r_umb_w

Press the CHANNEL • or • button to select your

desired channel number or press the number buttons

on the remote control.

Remember: If the TV/VCR is connected to a cable

box or satellite box, the TV/VCR must be on CH3 or

CH4, then the channel to be viewed must be selected

on the cable box or satellite box.

3Adjunctsou_'sd

Press the VOLUME Aor V button

to adjust the volume.

This ffmction enables you to decrease the TV screen

contrast and making it suitable for use with a TV

GAME.

NOTE: This function can not be set during recording.

Press the GAME button on the

remote control. "GAME" appears

on the screen.

When you press the GAME button;

,, The TV/VCR comes on automatically if it is off.

,, The TV/VCR will be in external input mode auto-

matically.

TO (,Af {.EL ZHE GAME MODE

Press the GAME button or CHANNEL • or • but-

ton on the remote control,

Magnetism from nearby applitmces might affect the

color of the TV picture.

If this happens, move this unit away from the appli-

ance. If the color is still not correct, disconnect

power cord from AC outlet then reconnect it after 30

minutes.

The TV/VCR's picture controls - BRIGHT, CON-

TRAST, COLOR, TINT and SHARPNESS - are

preset to factory specifications. Although they are

tisually the best, you may need to make some ftmher

adjustments for a natural looking image.

NOTES:

,, Procedures must be followed within 5 seconds or

the Picture Control mode will be cancelled.

,, When setting the Picture Control, the Game mode

will be cancelled.

Make sure ...

,, TV/VCR power must be turned on.

'_ Select PIOTUF/E OONTROU'

Pressthe MENU button on the MENU

remote control. _n pROGRAMMiNG

pICTURE CONTROL

Press the PLAY/• or STOP/• but- _..........CHANNEL SET UP

USER'S SET UP

ton to point to "PICTURE CON- v..........

LANGUAGE [ENGUSH]

C:APTION [OFF]

TROL". ..........

T_ME SEAFtCH

Then, press the F.FWD/I_ button. ,..........

2S÷lleet item you wagt to adjust

Pressthe PLAY/• or STOP/• button until desired

control is displayed.

BRIGHT

CONTRAST

COLOR

TINT

SHARPNESS

BRIGHT

-DDDDDDDIDDDDDDD+

3Adiust th÷ Ipictu_"eeor_trol

Press the F.FWD/_ or REW/"9 button to adjust to

your desired level.

REW/'_I F.FWD/I_"

BRIGHT to decrease to increase

brightness brightness

CONTRAST to decrease to increase

contrast contrast

COLOR to pale to brilliant

TINT to purple to green

SHARPNESS to soft to clear

•If there is a power failure of any kind, the unit will

retain its memory for this feature.

- 14 - EN

9103

ZO<JAN<EL THE LLOS£D L\4P770N

You can view specially labeled (cc) TV programs,

movies, news, pre-recorded tapes with either a dia-

logue caption or text display.

CAPTION mode: By choosing the caption mode, you

can watch dmnms, movies mad news while captioning

the dialogues and the contents of news.

TEXT mode: By choosing the text mode, you ctm

watch half screen text int_mmtion if you want.

1-2: You may get these captions or text information

by selecting either "1" or "2". Caption "2" is usually

used fl_r a second hmguage if available.

NOTE:

Not all programs are broadcast with closed captions.

Your television is designed to provide error free

closed captions from high quality antenna, cable trod

VCR signals. Conversely, poor quality signals are

likely to result in caption errors or no captions at all.

Common signal conditions which may cause captions

errors are listed below:

•Automobile ignition noise

• Electric motor brash noise

• Weak snowy reception on TV screen

• Multiplex signal reception displaying picture

ghosts or airplane flutter.

• Playback of poorly recorded or worn VCR tapes.

NOTE:

If the TV/VCR displays a black box on the TV

screen, this means that the TV/VCR

is set to the TEXT mode. To clear ]

screen, select [CAPTIONI l, [CAP- |

TION2I or [OFFI. ]

Make sure ... k

• TV/VCR power must be turned on.

'_ Selreel_ CAPI_ON ....

T_M[I_ pROGRAMMiNG

Press the MENU button on the _-,._o_oo_

CHANNEL SET UP

remote control, os_.ss_ up

V.CHIp SET UP

LANGUAG E_GUSH]

Press the PLAY/A or STOP/_' but- " _o°_........_o_,P_....

T_MESEARCH

ton to point to "CAPTION". ...........

2S÷_ect your desired eaptio_ menu

Press the F.FWD/_ or REW/'_I ....

TIMER pROGRAMMING

button until your desired caption _,,,_o_oo_

CHANNEL SET UP

mentl appears, v°_so.,__r_op°_

LANGUAGE ggN 3LhC'H]

([CAPTION II, [CAPTION2I, , ............_.........>

ZERO RETU_N

TIME SEARCH

ITEXTI I or ITEXT2I) ...........

3 IExit the eaptiiols selXibsg mode

Press the MENU button on the remote control to

return to TV mode.

Repeat steps 111 and 121, select [OFFI using the

EFWD/I_ or REW/-ql button. Press the MENU but-

ton on the remote control to return to TV mode.

4qIEN THE CLOSED CAPTION MODE

L$'ON

The On-Screen Display will disappear after 5 sec-

onds.

• This is also tree when the MUTE button is pressed,

and when the PAUSE/STILL button is pressed

while recording.

• If there is a power failure of any kind, the unit will

retain its memory for this feature.

V-CHIP enables parents to prevent their children

from watching inappropriate material on TV.

V-CHIP reads the ratings for programming (except

for news trod sports programs, unedited movies on

premium cable channels, and Emergency Broadcast

System signals), then denies access to programming

if the program's rating meets the limitations you

select. In this case, "PROTECTED PROGRAM by

..." message appears on the TV screen.

To block cenain ratings, follow the steps below.

• Programming nmy be rated by the Motion Picture

Association of America (MPAA) or according to

the Television Parental Guidelines. In order to

block any inappropriate programming, set your

limits in both places (MPAA RATING and TV

RATING).

7V RATING SE_ UP

Make sure ...

• TV/VCR power must be turned on.

'f Selec[ V_CH_P SET UP '' _u

TIMER p ROGI:tAM M_NQ

Press the MENU button on the ..............

SETTING CLOCK

remote control, o._cos_,__F_'_opuP

V42,H_p SET Up

Press the PLAY/A or STOP/_' but- o_t,o,_....... _o<_.......

Z_RO RETURN

ton to point to "V-CHIP SET UP". ..........

_ND_× S_ARCH

Then, press the F.FWD/I_ button.

2Se_ec_ TV IR£"FING" v CH_PS_T UP

Press the PLAY/A or STOP/_ but ........MPAA RATING

ton to point to "TV RATING".

Then, press the F.FWD/_ button.

15 EN

9103

3 Select your degirod item (

Press the PLAY/A or STOP/_' but- I,- _, [v,_<

toll to point to your desired item. [ ,_'__< '[v,_w]Ev'_w]

v PG ( [VIEW]

Them press the EFWD/_ button to ,_'_<_<[v,_<[v'_<

select [BLOCKI or [VIEWl.

• When you select the rating category and turn it

[BLOCKI, the higher rating will turn [BLOCKI

automatically. Also, the lower rating will rum

[VIEWl autommically.

• When you turn "TV-Y" to [VIEWl, then all ratings

will rum to [VIEWI autommically.

Selection Rating Category Explanations

TV-Y Appropriate for all children

TV-Y7 Appropriate for children seven and older

TV-G General Audience

TV-PG Parental Guidance suggested.

TV-14 Unsuitable for children under 14

TV-MA Mature audience only

When you select TV-Y7, TV-PG, TV- 14, or TV-MA

and you press the EFWD/_ button, the sub-ratings

will appear on the TV screen.

If you select the rating category (example: TV-PG)

mid turn it [BLOCKI or [VIEW], the sub-ratings

(example: V for Violence) will rum [BLOCKI or

[VIEWl autommically.

You can set the sub-rmings to [BLOCKI or [VIEWI

individually when the rating category is set to

[BLOCKI.

To set the sub-ratings individually, follow the steps

below.

•When you select [TV-Y7]:

Press the STOP/T or PLAY/A

button to select "FV" (Fantasy

Violence).

Then, press the EFWD/II_ button

to select [BLOCKI or [VIEWl.

TV ¥7 [BLOCK]

FV [BLOCK]

W PG

When you select [TV-PG], [TV- f

14] or [TV-MA]: ]

Press the STOP(T or PLAY/A ]

button to£,_elect D"(Suggestive ]

Dialog), L"(Coarse Language), ]

"S"(Sexual Situation), or

"V"(Violence). Then, press the

F.FWD/_ button to select

[BLOCKI or [VIEWI.

TV ¥

TV ¥7 ( )

TVO,

TV@G (DLSV}

TV 14 (DLSV}

TV_A(LSV)

Note: When you select [TV-MAI,

"D" does not appear on the TV screen.

[BLOCK] /

[BLOCK]

[BLOGK]

EVlEW]

[BLOCK1

[BLOCK]

• The sub-ratings which set to [BLOCK] appears

next to the rating category in the TV RATING

meuu.

Exit tb÷ V-OlhipsettiBg mode

Press the MENU button on the remote control to

return to original mode.

MZ{4A RA77NG SE7 UP

Make sure ...

• TV/VCR power must be turned on.

'_ Select VGHIP SET UP"

M_NU

Press the MENU button on the .................

PICTUIRE CONTROL

remote control. _r,,_ o_oo_

CHANNEL SEt UP

USER'S S_T UP

Press the PLAY/_ or STOP/T but .............

LANGUAGE [ENGLISH]

CAPTION /©_F]

ton to point to "V-CHIP SET UP". ..........

TIME SEARCH

Then, press the F.FWD/_ button. ,..........

2Selleet '@PAA R£F_NG" v.........

TV RATtNG

Press the PLAY/_ or STOP/_' but- M_......

ton to point to "MPAA RATING".

Then, press the F.FWD/_ button.

Then, press the F.FWD/D_ button to

select [BLOCKI or [VIEWl.

Selleet your desired iitem

Press the PLAY/A or STOP/_' but-

ton to point to your desired item. _ [v,_]

[vtE_q

pe m [vt_q

[BLO@q

_C_17 [BLOCK]

DLOOK]

Selection Rating Category Explanations

O General Audience

PG Parental Guidance suggested.

PG-I 3 Unsuitable for children under 13

R Restricted; under 17 requires accompa-

nying parent or adult guardian

NC-17 No one under 17 admitted

X Mature audience only

• When you select the rating category and turn it

[BLOCKI, the higher rming will turn [BLOCKI

automatically. Also, the lower rating will turn

[VIEWl automatically.

• When you turn "G" to [VIEWl, then all rmings

will rum to [VIEWI automatically.

4 Exit the VsCMp settiBg mode

Press the MENU button on the remote control to

return to original mode.

16 EN

9103

This function enables you to receive FM radio broad-

castln

'_ Set the gbl mode f

Press the TV/FM button oll the [

remote control. The radio frequency| FM880MHz

appears oll the TV screen. |

2Sebet the radio _requescy you wank to rece ve

Press the CHANNEL • or • button until your

desired radio frequency appears.

NOTES:

" FM mode is not available for model SRC22194.

,, The radio frequency indication repeats to appear

and disappear.

,, You ca1 not record the FM radio wave broadcast-

ing.

,, If you receive a weak radio signal, you may change

the FM Antenna mode to INT(intemal) or

EXT(extemal) by following the step below.

l)Press the MENU button. Press the PLAY/• or

STOP/_' button to point to "CHANNEL SET UP".

Then, press the EFWD/_ button.

2)Press the PLAY/• or STOP/• button to point to

"FM ANTENNA". Select [INTI or [EXTI using

the EFWD/_ or REW/_I button.

This TV/VCR will operate with any cassette that has the _ mark. For best results, we

recommend the use of high-quality tapes. Do not use poor quality or damaged tapes.

bYS££77NG ACASSET T£

Insert the cassette in the direction as shown. Push in

gently, but contfimously, on the center-back of the

cassette until it is drown into the TV/VCR. The

TV/VCR will automatically turn on.

Window, _ .

CORRECT WRONG

,, Avoid moisture. Moisture condensation may occur

on the tape if it is moved from a cold place to a

warm place or visa versa. Before using a tape with

these conditions, to avoid damage of the tape trod

your TV/VCR, wait until the tape has warmed to

room temperature and the moisture has evaporated.

,, Avoid extreme heat, high humidity and magnetic

fields.

,, Do not tamper with the cassette medlanism.

,, Do not touch the tape with your fingers.

Make sure ...

'] hsselrt a prerecord'tied tape

If the erase-protection tab has been removed, the

TV/VCR will start playback automatically.

2'to begin playback

Press the PLAY button. (.....

Note: If any menu is activated on /

the screen, the PLAY button does /

not function. Press the MENU but- /

ton to clear the menu, then press the [

PLAY button.

'_%step p_aybaelk

Press the STOP button when playback is completed.

17 EN

9103

The TV/VCR has tm auto repeat function that allows

you to repeat a tape indefinitely without touching the

PLAY button.

ALL REPEAT: Repeat playback from the beginning

to the end of the tape.

BLANK REPEAT: Repeat playback trom the begin-

nm to a blank art ol more than 10 seconds

'_ Se_et USER'S SET UP' MENU

Press the MENU button on the ................

PICTURE CONTROL

remote control. SE_,_GOLOOKCHANNEL SET Up

USER'S SET UP

Press the PLAY/it or STOP/_' but- VLAN_OA_E........ }'_,_]

CAPTION [OFF]

ton to point to "USER'S SET UP". ,,,_.........._A_o.

_NDEX SEARCH

Then, press the EFWD/I_ button.

2Select 'ALL" or 'BLANK"

Press the PLAY/it or STOP/_' but-

ton to point to "REPEAT PLAY".

Press the EFWD/I_ or REW/'_I

button repeatedly until your desired

selection [ALLI or [BLANKI

appears.

USER'S SET UP /

RENTAL _[01_

REPEAT pray [ALL].

AUTO RETURN [OiVF !

Exi{ the Re{seat Hay ee{tb_g

Press the MENU button on the remote control to

return to the TV mode.

4Start playback

Press the PLAY button to start the Repeat Play.

"REPEAT PLAY I_" appears.

,, Once you select the Repeat Play mode, it stays in

effect even after you rum off the TV/VCR.

,, If the Rental mode is set [ONI, the "RENTAL

PLAY I_" display has priority.

TO CANCEL THE ££PEAT PLAY MOD£'

Repem steps [11 and [21, select [OFFI using the

EFWD/I_ or REW/-_I button on the remote control.

Press the MENU button on the remote control to

retum to TV mode.

If there is a power failure of any kind, the unit

will retain its memory for this feature.

PICTU£E SgA £g H

This feature is very useffd in finding or skipping over

a particular scene on a tape. In this mode, the sound

will be muted.

1)You may view a video tape at a high speed in

either a forward or reverse direction by pressing

the EFWD or REW button during playback (in the

SP /LP /SLP modes).

2)Press it again and the TV/VCR will now search in

super high speed (in the LP /SLP modes only).

NOTE: Tapes recorded in the SP or LP mode will

display a noise bar on the TV screen and the pic-

ture may revert to Black and White. This is normal.

3)Press the PLAY button to return to normal speed.

This function allows you to search easily a beginning

point that you want to review by rewinding or fast

forwarding.

NOTE:

Zero Return WILL NOT work on a blank tape or a

bhmk orhonoIata e

J Stop _ t/_p@ _t y@_l¢' d@eig@d pOi_lt

Rewind or fast forward the tape to the beginning

point from which you want to review.

2I[,/esetthe eoul_ter to 0:00:00

Press the COUNTER RESET button repeatedly.

3 IBeghs recordi_sg or playback

Press the RECORD or PLAY button.

Press the STOP button when recording or playback is

completed.

4Toactivate 'ZERO IRETURN"mode

Press the MENU button on the .....

remote control. _,_PRO_AM_,_p,O_OREOO._ROL

SETglNG CLOCK

Press the PLAY/it or STOP/_' but- °OS_R'_...........S_o_

V-CHIP SET UP

ton to point to "ZERO RETURN". O_,T,O,........EO<_.......

ZERO RETURN

Then, press the EFWD/I_ button. T,_E_O_

_NDEX SEARCH

The counter will appear on the TV screen.

The tape will automatically stop when the counter

returns to 0:00:00.

18 EN

9103

TIME SEARCH

The Time Search function makes it possible to

quickly adwmce the tape to your desired position

simply by entering the exact amount of playback

time you w_mt to skip,

NOTES:

• Time Search c_m be set up to a maximum of 9

hours 50 minutes (9:50) by 10 minutes at a time,

• This function will not operate in recording mode,

In the example below: To watch a program that is 2

hours, 50 minutes from the present tape position, in

either direction.

'_ _gl_elP{ atape

S@_eC_ _lll_lll_I[_E SEARCH" mode

Press the TIME SEARCH button (with each push it

will increase by 10 minutes).

Press the PLAY/A or STOP/_' but- ....

ton until your desired time appears.

(Example: "2:50" stmlds for 2

hours 50 minutes)

If you wish to ctmcel the Time Search at this point,

press the MENU button on the remote control.

dIBe@_Time Sea_"eh

By pressing the REW/'_I or EFWD/I_ button, the

TV/VCR will rewind or fast forward to the specified

point.

The time counts down as the searching progresses.

When 0:00 is reached, the tape will start playback

automatically.

TO CANCEL 7HZ TIME SEARCH ¢_t_hi_

Press the STOP/EJECT button on the TV/VCR or the

remote control. This will delete the selected time.

An index signal is recorded on the ;,_#[gag_#g,_

tape automatically when the record- g,_&_

USER'S SET UP

ing is started. To view a recording at _A'_g_E_%_'*"_

a specific start point: _gL'_'btgZ_

TiME SEARCH

l)Press the MENU button on the ...........

remote control. Press the PLAY/A or STOP/_' but-

ton to point to "INDEX SEARCH", then press the

EFWD/I_ button.

2)Press the PLAY/_ or STOP/_' button within 30

seconds until the number of programs that you

want to skip appears.

3)Press the EFWD/_ or REW/-_I button to start

index search. If you wtmt to go forward, press the

EFWD/I_ button. If you want to go back, press

the REW/-_I button.

• After index search, the TV/VCR will play the tape

automatically.

• In some cases, the index mark at the beginning of

video tape cannot be detected.

Press the SLOW button to reduce fl_e playback speed.

The TV/VCR mutes fl_e sound during slow motion.

Press the PLAY button to return to nomml playback.

NOTE: If left in the Slow mode for more than five

minutes, the TV/VCR will automatically go into the

Stop mode.

This function enables you to improve the picture

quality when playing back worn cassettes such as

rented tapes.

Press the MENU button on the ....

TIM _1:t pROGIqAMM_NO

remote control, s_=,_'c_°_co_m_O_c_o_

CHANNEL S_T UP

Press the PLAY/_ or STOP/_' but- _ v°S_o,,_......_, o_

_ANGUA_E [_NeUSH]

ton to point to "USER'S SET UP". _o......._,o_,_°<

TIME SEA_C_

Then, press the EFWD/I_ button. '.........

2Set },/EN"rAL" 1o [ON]] .... ,......

Press the PLAY/A or STOP/_' but- '

RENTAl ..... ON]

IeFI

ton to point to "RENTAL". _omo,_,o_ to<

Press the EFWD/_ or REW/'_I

button until tONI appears.

IExit the _qe_ta} _ettil_¢j

Press the MENU button on the remote control to

return to the TV mode.

4S{all't p_ayback

Press the PLAY button to start playback. "RENTAL

PLAY _" appears.

• Once you select the Rental mode, it stays in effect

even after you turn off the TV/VCR.

TO CA NCZL 7HE R£iVT½L MODE

Repeat steps [11 and [21, select [OFFI using the

EFWD/_ or REW/-_I button on the remote control.

Press the MENU button on the remote control to

return to TV mode.

If there is a power failure of any kind, the unit

will retain its memory for this feature.

19 EN

9103

hi the Pause/Still mode only, when the picture begins

to vibrate vertically, stabilize the picture by pressing

the CHANNEL • or • button.

NOTE:

If there are video noise lines on the screen, see Tracking

Adjustment section.

You ctm view a still picture on the TV screen during

playback (the Still mode). Press the PAUSE/STILL

button during playback. Only tapes recorded in the

SLP mode will show the least amount of lines. Press

the PLAY button to return to playback.

NOTES:

,, You can adwmce the picture one frame at a time by

pressing the PAUSE/STILL button during the Still

mode.

,, If it is left in the Still mode for more them five min-

utes, the TV/VCR will automatically switch to the

Stop mode.

,, Tracking adjustment will be set automatically

(Digital Tracking function) when you start play-

back.

,, However when playing pre-recorded tapes or tapes

recorded on units other thtm your own, noise lines

(black mid white streaks) may appear on the play-

back picture. If this occurs, you cml adjust the

tracking control mmmally by pressing the CHAN-

NEL • or • button until the streaks disappear. To

return to the DTR function, stop the tape once and

start playback again.

,, You can reduce the noise lines by pressing the

CHANNEL • or • button in slow mode, too.

Tracking adjustment in Slow mode will not be set

automatically.

NOTE:

,, In Still mode, press the SLOW button and press the

CHANNEL • or • button until streaks disappear.

To return to Still mode, press the PAUSE/STILL

button again.

f f? re rec¢ rdh g, mg f e

The desired channel is selected by pressing the num-

ber buttons on the remote control or the CHANNEL

Up/Down button. (If the TV/VCR is connected to a

cable box or satellite box, the TV/VCR must be on

CH3 or CH4, then the channel to be recorded is

selected on the cable box or satellite box. )

There is a tape with its safety tab into the VCR.

The desired recording speed is selected in SP(stml-

dard play) or SLP(super long play) mode by press-

lug the TAPE SPEED button on the VCR.

Tape Speed Recording/Playback Time

Typeof tape T60 Tl20 Tl60

SP mode 1 hour 2 hours 2-2/3 hours

SLP mode 3 hours 6 hours 8 hours

ERASE PREVENTI()N

You ctm prevent acciden-

tal erasing of recording

by breaking off the tab

on the back edge of the

cassette.

If you decide to record

on the tape again, cover

the hole with plastic

tape.

Plastic Tape

Make sure ...

" TV/VCR power is turned on.

,, Insert a cassette tape with its erase prevention tab

in place. (If necessary, rewind or fast forward the

tape to the point at which you wtmt to begin

recording.)

NOTE: This unit will ONLY record trod view the

same channel.

1)Begin the recording by pressing the RECORD but-

ton.

To temporarily stop recording or resume it, press

the PAUSE/STILL button. After the VCR has been

in Pause mode for 5 minutes, it will stop automati-

cally to protect the tape _mdthe video head.

NOTES:

,, After five minutes, the TV/VCR will automatically

switch to the Recording mode to prevent tape

damage.

,, If "CLOSED CAPTION (ON)" is selected, the

On-Screen Display will appear for 5 seconds, then

disappear.

2)Stop the recording by pressing the STOP button

when recording is completed.

- 20 - EN

9103

This function enables you to set the recording length

simply by pressing the REC/OTR button oll the

VCR.

1)Begin OTR by pressing the (OTR<2a0_

REC/OTR button on the VCR /

repeatedly until the desired

recording length appears.

Recording stops when 0:00 is _p

reached.

NOTES:

,, This l%nction CANNOT be done from the remote

control.

,, To stop the OTR operation, press the STOP button

on the TV/VCR or on the remote control.

,, If the tape runs out before the end time, the

TV/VCR will switch to the Stop mode immediate-

ly, eject the tape and turn itself off.

Push(es) Display Recording length

1 push (continuous recording)

2 pushes 0:30 30 minutes

3 pushes 1:00 60 minutes

4 pushes 1:30 90 minutes

,1. 4, 4.

17 pushes 8:00 480 minutes

You may set the TV/VCR to start trod end a record-

lug while you are away. You can set 8 programs to

record on specific days, daily or weekly within a 1

year period.

In the examph" below, the timer is being set to record:

DATE: July 5th, 2002

SETTING TIME: from 7:30PM to 8:50PM

CHANNEL: CH61

TAPE SPEED: SP

Make sure ...

• If your TV/VCR is connected to a cable or satellite

box, you must set the TV/VCR to channel 3 or 4

to match the output channel of the box.

• Clock is set to the correct time and date before set-

ting the timer.

• TV/VCR power is turned on to program it.

,, To insert a cassette tape with its erase prevention

tab in place. (If necessary, rewind or fast forward

the tape to the point at which you want to begin

recording.)

,, To set the channel you want to record

Avoid overlap of programs ...

There is a chtmce that a program will not be record-

ed. When programs overlap:

• The program with the earliest start time will record

first.

• Once the earliest program finishes recording, the

overlapping programs will record in the order of

the program number.

• The illustration below demonstrates the sequence

of recording.

Recording Sequence

Program 1

10:00AM-11:00AM :

Program 2

9:00AM-10:00AM i

Program : I [ I I

9:30AM-12:00PM i

9:00AM 10:00AM 11:00AM 12:00PM

"Recordlng per/od is SHADED

'_ Sek_ct _'T_EB PBOGg4AMMIIHG"

Press the MENU button on the remote control.

Confirm "TIMER PROGRAM ..... TIMER pROGFtAMM_NG

MING" is pointed to by pressing _,,_.............o_oo_

the PLAY/A button. °"_o_........._To_

v CH_P SET Up

LANGUAGE [ENGUSH]

Press the EFWD/_ button, o_..... Eo<

ZERO RErUnN

TIME SEARCH

• If you have not yet set the clock, ,..... _o.

"MANUAL CLOCK SET" appears. If so, follow

stops [3] to [8] on page 11. Then set the timer

recording.

2Select your desked p_'og_"am pesitio_% (1,_8)

Press the PLAY/A or STOP/T but- ( ................

ton to select the desired program | c" _y. :_" .E_ |

S" '/.... :-- -:

po. ltion, h ......... I

......_ 4..... >. < -/

Tie1 press the FFWD/I_ bttton I:: :_::::: ::: :x xJ

[ X JX_Xi :X !IXX

Set the eha_mel sumlber

Press the PLAY/A or STOP/V but-

ton until the desired chtmnel num-

ber appears.

(Example: CH61 )

Then, press the EFWD/I_ button.

Remember:

If your TV/VCR is connected to a cable or satellite

box, you must set the TV/VCR to charnel 3 or 4 to

match the output channel of the box.

4 Select @see, evep{ da'_ e_" weeklly ree¢_"dhg

For once recording :

Press the PLAY/A (up) button

until the desired date appears.

(Example: "7/05" for July 5th).

Then, press the EFWD/I_ but-

ton.

21 EN

9103

For every day recording :To

recolzl a TV program at the same

time on the same channel ever 3,

day. (Example: Monday through

Sunday)

Press the STOP/_' (down) but-

TIMER PROGRAMMING

CH DATE BEG_N g_qD

- %+i- ii-i -d :-- -: - -

• 6¢<-1VR¥ DAY;- -:

4- - > <

/ . > <

ton until "EVRY DAY" appears. Then, press the

EFWD/_ button.

For weekly recording : To recolzl a TV program at

the same time on the same channel every week.

(Example: eve13, Monday)

Press tile STOP/_' (down) button

until "EVRY" and your desired

day of the week appear together.

Then, press the EFWD/I_ but-

ton.

T_MER pROGRAMMING /

OH DATE ttEG_It IND

5 Set b;_,gi_i_g hot_l¢

Press tile PLAY/I or STOP/_' but-

ton until the desired hour appears.

(Example: " 7, PM" for 7:30PM)

Then, press the EFWD/_ button.

Set begislsing min_4e ( ................ "_

Press the PLAY/A or STOP/* bt,t- / ii _A7 iii" ill /

ton tmtil the desired minute appears./ :: 2: :: :; ;,:: ::/

ttzxamp_e: . u for/:aoww) | :: ,:: :: :: ::|

Then, press the EFWD/II_ button. [ -_ - : :- j

7set i ................ ]

Press tile PLAY/A or STOP/T but- 7_?7_ _" ==D

-4.... : - -: -

ton until tile desired hour appears. ,. .......... _=>!= .....

(Example: '% PM" for 8:50PM) ...................

Then, press tile EFWD/_ button, i! !ii ii !i ii

8se_ e_sdminute _ ................

Press tile PLAY/_ or STOP/* but- [ i" ?F_ 111= VD -1

ton tmtil tile desired minute appears.[ :: I:: :: :::1

61 7/LLq FRI 7:_2J_ }{:g0 _

(Example: "50' for 8:50PM) [' ; ]

Then, press tile EFWD/I_ button. [ :: ;:: :: :: ::j

Se{ the tape _peed

Press tile PLAY/_ or STOP/_' but-

ton until the desired tape speed

appears. (Example: SP)

'_0 gigish set/:i_% I've IprOg_'am

Press tile EFWD/I_ or REW/-_I button. The program

is now completed.

,, To set another program, repeat steps [2] to [10].

,, Press the MENU button on the remote control to

return to original mode.

'f '_ Set the time_r

Press tile POWER button to set automatic timer

recording. The RECORD indicator lights up.

,, You must turn off the TV/VCR to activate automat-

ic timer recording.

If power is not turned off and you continue watdl-

ing TM "TIMER REC STANDBY" starts flashing

on the TV screen 2 minutes before the programmed

start time.

- 22 -

To shift file time schedule of an automatic timer

recording.

1)Press the POWER button.

2)Repeat step [11 on page 21.

3)Press the RECORD button and select the desired

program using the PLAY/A or STOP/V button.

4)Press the RECORD button again.

Each additional push will shift forward the

begin/end time lbr recording by 10 nfinutes. When

tile recording is already in progress, each additional

push will shift lkwward tile end time only. If you

want to cancel while setting, press tile

PAUSE/STILL button on the remote control. The

recording time returns to the original time.

NOTE: When you shift forward the time schedule

during recording, the recording speed will automati-

cally be set to the SLP mode.

5)Press the EFWD/_ or REW/-_I button to exit the

setting menu. Then press tile MENU button on tile

remote control to return to original mode.

T(} COR]¢ECT A P_{OG_{A M

• While setting a program; press the REW/'_I but-

ton to go back one step and enter file correct num-

bers using the PLAY/_ or STOP/_' button.

,, After setting a program;

1)Press the POWER button.

2)Repeat steps [ll - [21 on page 21.

3)Press tile EFWD/I_ button (or press tile REW/'_I

button to go back one step) until the part you

wtmt to correct begins flashing, then make tile

changes pressing the PLAY/A or STOP/V but-

ton.

4)Press the POWER button to set automatic timer

recording.

9103

TO CA NCH, A J_=A UT@MA TIL" I_IM£'£

•After setting a program;

1)Press the POWER button.

2)Repeat steps [11N [21 under TIMER RECORD-

ING, page 21, trod select a program you want to

cancel.

3)Press the T-PROG. CLEAR button.

4)Press the MENU button on the remote control to

return to TV mode.

•While recording is in progress;

1)Press POWER button.

2)Press the STOP/EJECT button on the TV/VCR.

TO CHECK THE £ZG1N/ZNL) TIME

1)Press the POWER button so that the REC indicator

goes off.

2)Press the MENU button on the remote control.

3)Confirm "TIMER PROGRAMMING" is pointed

to.

4)Press the EFWD/I_ button. The details of pro-

grams appear on the TV screen.

5)Press the MENU button on the remote control to

return to TV mode.

• Make sure the channel you want to record is prop-

erly set in adv_mce.

• It is not necessary to press the RECORD button for

timer recording.

• Recording begins automatically at the Starl time.

• If you are recording using a Timer mode, you may

not operate the unit mtmually.

• The erase-prevention tab on the cassette must be in

place (or you must put tape over the hole).

• If the erase-prevention tab is removed, the cassette

will be ejected when the POWER button is pressed

to off.

• If the tape runs out before the end time, the

TV/VCR will switch to the Stop mode immediate-

ly, mad the tape will be ejected.

With this feature, after timer recording is finished,

the beginning of the recorded program(s) can be

searched for automatically.

'_ oclect USEF,,IS SET ....

TIMER pFtOGRAMMING

p_CTUI:tE CON rROL

Press the MENU button on the ...........

CHANNEL SET Up

remote control. _ v.o.:p°s_'ss_rs_'_opuP

LANOUAGE [ENGLISH]

Press the PLAY/A or STOP/T but- z_=o°......=_,o=,_°_

TIME STARCH

ton to point to "USER'S SET UP". ...........

Then, press the EFWD/_ button.

2Set AUTO RE"I"URN" to ION] .... ,......

Press the PLAY/A or STOP/31' but- RENTAL {OFF]

ton to point to "AUTO RETURN". ........... '_°_=_

AUTO RETURN ION] •

Press the EFWD/I_ or REW/'_I

button until [ONI appears. Then,

press the MENU button on the remote control to

return to TV mode.

3Auto ReIur_ will be9i_

When all the timer recordings are completed, the

TV/VCR will rewind to the beginning of the recorded

program(s).

NOTE:

• If you press the POWER button while tape is

rewinding, the Auto Return will stop.

4Watch the IeeCorded program

Press the PLAY button.

TO CANCEL THE A UTO RETURN

Repeat steps II l and 12l, select IOFFI using the

EFWD/I_ or REW/'_I button. Then, press the MENU

button on the remote control to return to TV mode.

If there is a power failure of any kind, the unit

will retain its memory for this feature.

The Wake Up Timer function turns on the TV/VCR

without using the POWER button after a desired

period of time.

NOTES:

• Use the remote control for this procedure.

• Clock must be set to the correct time before setting

the timer.

• If you want to select [TAPE], you must inserl a

cassette tape in the TV/VCR. The tape will start

playback automatically on your desired time.

'] Select "WAKE UP TIIbIEIB"

Press the WAKE-UP/SLEEP button

on the remote control once, _md

confirm "ON/OFF" is pointed.

Press the EFWD/_ or REW/_I

button until tONI appears.

iWAKEup,-O,,OFF

TIMER TVtTAPE i'r _{j

TIME 112:00

23 EN

9103

2Select TV"or TAPE"

Press the PLAY/• or STOP/• but-

toll until it points to "TV/TAPE".

Press the EFWD/I_ or REW/-_I

button, and select [TVI or [TAPEI.

3 Set wake _p tree

Press the PLAY/• or STOP/• but-

ton until it points to "TIME".

Press the EFWD/I_ or REW/-_I

button until your desired wake up

time appears.

Each additional push will increase (or decrease) the

time by 10 minutes.

Exiit t'_e Wake Up "['iimer sett_sg

Press the MENU button on the remote control to

retum to TV mode.

T@ (TAJ_=C£L TR£ IIq4K£ U? TIM££

Press the WAKE-UP/SLEEP button on the remote

control once, and confirm "ON/OFF" is pointed.

Press the EFWD/I_ or REW/-_I button until [OFFI

appears.

The Sleep Timer function rums off the TV/VCR

without using the POWER button after a desired

period of time.

NOTE:

,, This function does not operate during Recording

mode.

'_ Select' $LIEEP"I"I@ER _

Press the WAKE UP/SLEEP button on the remote

control until "SLEEP TIMER" appears.

2SeI sleep tree

Press the PLAY/A, STOP/•,

EFWD/II_ or REW/'_I button until

your desired sleep time appears.

Each additional push will increase .......... E_,00_

the time by 30 minutes up to 120 minutes.

Press the MENU button on the remote control to exit

the Sleep Timer setting.

T@ CANCP'L 7"HE SL££1 _77M££

Press the WAKE UP/SLEEP button on the remote

control until "SLEEP TIMER" appears.

To view the time left for sleep timer, press the

WAKE-UP/SLEEP button twice, then press the

MENU button on the remote control to exit the sleep

timer setting.

COPYING AVIDEO TAPE

You can make copies of video tapes made by friends

or relatives for your enjoyment.

WARNING: Unauthorized recordings of

copyrighted video tapes may be an

infringement of copyright laws.

Connect your TV/VCR and a Source (Playing) VCR

using the following diagram.

oo oooooooocoooo

oo ooooooooooooo

__oooooooooooooooo

ooooooooooco.... [The TV/VOFt]

O000000000000000

O000000000CO0000

oooooooo_....

oo oooooooooooooo

888888888888£88

[Ex: Source (playing)

VCFt or camcorder]

Audio/Video

adapter cable

(not supplied) ® ®

VIDEO

l)Insert a pre-recorded video cassette into the Source

(Playing) VCR or camcorder.

2)Insert a blank video cassette, or one you want to

record over, into the TV/VCR's cassette compart-

ment

3)Press the SPEED button on remote control for the

TV/VCR to select the desired recoNing speed

(SP/SLP).

4)Press the CHANNEL • or • button on the

TV/VCR until "AUX" appears on the screen.

NOTE: "AUX" is found below the lowest numbered

memorized channel. (Example: CH2)

5)Press the RECORD button on the TV/VCR.

6)Begin playback of the tape in the source (Playing)

VCR or camcorder.

NOTE: For best results during copying, use the

TV/VCR's front panel controls whenever possible.

The remote control might affect the source (Playing)

VCR's playback operation.

24- EN

9103

ON SCREEN DISPLAY

To check the Counter, Clock trod Channel number on the TV screen, press the DISPLAY button on the remote

control. Each time you press the DISPLAY button on the remote control, the TV screen will change as fl_llows:

g_HEz _li£ CLOS£D CAt XZOz MODE L5 OFF:

,, Counter mode: After 5 seconds, only

the counter remains. To clear it, press

the DISPLAY button.

,, Clock mode: After 5 seconds, only

the clock and the ch_umel number

remain. To clear them, press the DIS- .A

PLAY button. /

Pressonce

Press

once

WHEN 7'Hb2 CLOS£7_ CAP770N MODE L5 ON:

,, The On Screen Display disappears after 5 seconds.

,, This is true even if the MUTE button is pressed, or the

PAUSE/STILL button is pressed while recording.

OFF mode Clock/Counter mode

sp COUNT 0:_2:34

SPECIAL FEATURES

This shows the elapsed recording or playback time in

hours, minutes, trod seconds. (The displayed time

will not change on a blank tape or blank portions on

the tape.)The "-" indication will appear when the

tape has rewound further than "0:00:00" on the tape

couuter.

• When the end of a tape is reached during record-

lug, playback, or fast-forward, the tape will auto-

matically rewind to the beginning. After rewinding

finishes, the TV/VCR will eject the tape _mdturn

itself to off.

• This function is operative when Repeat Play is set

to the [OFFI position.

,, The tape will not auto-rewind during timer record-

ing or One Touch Recording.

(;A B1NE2 CL£'ANING

• Wipe the front panel and other exterior surfaces of

the TV/VCR with a soft cloth immersed in luke-

warm water _mdwrong dry.

,, Never use a solvent or alcohol. Do not spray insec-

ticide liquid near the TV/VCR. Such chemicals

may cause damage and discoloration to the

exposed surfaces.

A UT() H£'AD CLEANING

" Automatically cleans video heads as you insert or

remove a cassette, so you c_m see a clear picture.

,, Playback picture may become blurred or interrupt-

ed while the TV program reception is clear. Dirt

accumulated on the video heads after long periods

of use, or the usage of rental or wom tapes can

cause this problem.

If a streaky or snowy picture appears during play-

back, the video heads in your TV/VCR may need

to be cleaned.

l.Please visit your local Audio/Video store and pur-

chase a good quality VHS Video Head Cle_mer.

2.If a Video Head Cleaner does not solve the prob-

lem, please call our help line at 1-800-968-3429, to

locate an Authorized Service Center.

NOTES:

,, Remember to read the instructions inchJded with

the video head cleaner before use.

,, Clean video heads only when problems occur.

,, Should your TV/VCR become inoperative, do not

try to correct the problem by yourself. There are no

user-serviceable paris inside. Turn oft; unphJg the

power cord, and please call our help line at 1-800-

968-3429, to locate an Authorized Service Center.

25 EN

9103

TROUBI ESHOOT NG GUIDE

If you have followed the instructions contained in this manual trod have difficulty in operating your TV/VCR,

locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column to

remedy the problem.

PROBLEM CORRECTIVE ACTION

No power. • Make sure the AC cord is connected to an AC outlet.

• Make sure the power is tumed on.

No picture trod sound. • Make sure the AC cord is connected to an AC outlet.

• Check _mtenna connection.

• Let the TV/VCR program its tuner memory.

No picture or poor picture on • Adjust direction or replace antenna.

TV/VCR. • Adjust picture controls.

No sound or poor sound. • Adjust volume control on remote control or main unit.

• Press the MUTE button to restore sound.

Timer recording is not possible. • Make sure the timer recording is set correctly.

• Make sure the power is off.

• Make sure the TV/VCR clock is set correctly.

Cannot go into Record mode. • Make sure the tape has an erase-prevention tab. If need, cover the

hole with plastic tape.

Playback picture is partially noisy. • Adjust tracking control for a better picture using the CHANNEL •

or • button on the TV/VCR.

No picture but the audio is OK in • Head cleaning may be necessary. Refer to "AUTO HEAD

playback. CLEANING" on page 25.

No operation by infrared Remote • Make sure the AC cord is connected to an AC outlet.

Control. • Check batteries in remote control.

Video or color fades in and out • You can not copy a copyrighted video tape. You are experiencing

when making a copy of a video tape. copy guard protection.

CLOSED CAPTION PROBLEM POSSIBLE REMEDY

My TV/VCR is showing captions •You are watching a live broadcast and spelling errors made by the

that are misspelled, closed captioning production company may pass through uncorrected.

A prerecorded program will not show any misspelled words because

of the normal time available for editing the captions.

My TV/VCR will not show the text • Captions that are delayed a few seconds behind the actual dialogue

in its entirety or there is a delay of are common for live broadcast. Most captioning production companies

what is being said. can display a dialogue to a maximum of 220 words per minute. If a

dialogue exceeds that rate, selective editing is used to insure that the

captions remain up-to-date with the current TV screen dialogue.

My captions are scrambled with • Interference caused by building, power lines, thunderstorms, etc.

white boxes on the TV screen, may cause scrambled or incomplete captions to appear.

My program guide listed a TV show • Broadcasters may at times use a time compression process to speed

as being closed captioned but none up the actual program so that additional advertising time ctm be

of the captions were displayed, given. Since the decoder ctmnot read the compressed information,

captions will be lost.

My prerecorded video tape does not • The video tape was either tm illegal copy or the tape duplicating

show troy captions. The tape box company accidentally left out the captioning signals during the

mentions it being closed captioned, copying process.

My TV screen shows a black box • You are in the TEXT mode. Select CAPTION mode to CAPTION

on certain channels. [OFF].

- 26 - EN

9103

Gf_N!: A_AL SPECH, TCA 770NS g LE(, ZI_I(,A L SPI_CIF ICA 7 JONS

CRT : 13 or 19 inch in-line gun, 90"

deflection tube

Television system : NTSC-M

Closed caption system :§ 15.119/FCC

Video Heads :

Tape width :

Tape speed

SP:

LP:

SLP :

Tuner channel

TV VHF Low :

TV VHF High :

TV UHF :

CATV

VHF :

MID btmd :

SUPER band

HYPER band

FM:

r!Cerminals

Antenna input

Video input :

Audio input :

Earphone :

Rotary four-head

1/2 inch

33.40mm/sec.

16.67mm/sec.

11.12mm!sec.

#2_#6

#7_#13

#14_#69

A5_AI, AM

J_W

W+I _W+84

88M08MHz

VHF/UHF 75 ohms

unbahmced

RCA connector X 1

RCA connector × 1

1/8" monaural (3.5 ram)

Video input level :

Audio input level :

Video S/N ratio :

Audio S/N ratio :

0.5_2.0Vp-p

- 15dBs

More than 46dB

More than 43dB

OTHE'R SPEC1FI(L4770_VS

[ SSC132 ]

Power requirement : AC 120V/60Hz

Power consumption : 65W

Dimensions : H:15-3/8" (389mm)

Weight :

[ SSCl 2 ]

Power requirement :

W: 14-1/2" (367mm)

D: 14-7/8" (377mm)

23.1 lbs (10.5kg)

AC 120V/60Hz

Power consumption : 80W

Dimensions : H:17-3/8" (439mm)

W: 19-3/8" (491 ram)

D: 18-3/4" (475mm)

Weight : 43.0 lbs (19.5kg)

,, Designs and specifications are subject to change

without notice and without our legal obligation.

•If there is a discrepancy between languages, the

default language will be English.

CABLE CHANNEL DESiGNATiONS

If you subscribe to cable TV, the channels are displayed as 1-125. Cable comptmies often designate chtmnels

with letters or letter-number combinations. Please check with your local cable company. The following is a

chart of common cable channel designations.

CATVchannel 5A 2 3 4 5 6 7 8 9 10 11 12 13 A B

TVDisplay 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CATVchannel C D E F G H I J K L M N O P Q

TVDisplay 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

CATVchannel R S T U V W W+l W+2 W+3 W+4 W+5 W+6 W+7 W+8 W+9

TVDisplay 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

CATVchannelW+10 W+11 W+12 W+13 W+14 W+15 W+16 W+17 W+18 W+19 W+20 W+21 W+22 W+23 W+24

TVDisplay 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

CATVchannelW+25 W+26 W+27 W+28 W+29 W+30 W+31 W+32 W+33 W+34 W+35 W+36 W+37 W+38 W+39

TVDisplay 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

CATVchannelW+40 W+41 W+42 W+43 W+44 W+45 W+46 W+47 W+48 W+49 W+50 W+51 W+52 W+53 W+54

TVDisplay 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90

CATVchannelW+55 W+56 W+57 W+58 A-5 A-4 A-3 A-2 A-1 W+59 W+60 W+61 W+62 W+63 W+64

TVDisplay 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105

CATVchannelW+65 W+66 W+67 W+68 W+69 W+70 W+71 W+72 W+73 W+74 W+75 W+76 W+77 W+78 W+79

TVDisplay 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120

CATVchannelW+80 W+81 W+82 W+83 W+84

TVDisplay 121 122 123 124 125

- 27 - EN

9103

CONTROLES DE OPERACION Y INSTALACION DE LAS PILAS ............. 31

SUS FUNCIONES ........................ 28 PREPARACION DE CANALES POR

CONEXIONES DE ANTENA/CABLE ........ 30 PRIMERA VEZ .......................... 31

MODO DE ENTRADA EXTERNA ........... 31 AJUSTE DEL RELOJ ..................... 31

Este manual sirve para los modelos de 13" y19". Aexcepci6n de la apariencia, la operaci6n de los (los modelos es exac- ]

tamente la misma. En este manual se muestra el modelo de 19". I

NOTA:

No recomendamos utilizar mandos a distancia universales, No todas las funciones pueden ser controladas mediante tm

mando a distancia universal. Si decide utilizar un mando a distancia universal con esta unidad, tenga en cuenta que con el

ndmero de c6digo dado tal vez no se pueda controlar la unidad. En este caso, p6ngase en contacto con el fubricante del

mando a distancia universal.

-PANELDELANTERO-

1 2 3 4 5 6 78910111213 14

-CONTROL REMOTO -

iWAKEUP //

POWER ISLE_P //_V FM

3 .............C-__ C-_ C_

CHANNEL

RETURN

@ C75 _ CC_.....

15 ...........C_@ @ @_CVD(gD _

@ D,sp_ UUTE

16,,,,,,,,,,,

8,,,,,,,,,,,

18-,-,

.........../ _AR¸ _ SLOW

COUNTER

................. ARESET

,,,,,,,,,,5

,,,,,,4

...........23

............9

.........22

......21

Toma de entrada de video (VIDEO)- ConEctela a

la toma de salida de vNeo de su videoc_mara uotra

videograbadora.

Toma de entrada de audio (AUDIO)- Con0ctela a

la toma de salida de audio de su equipo de audio,

videoc_mara u otra videograbadora.

Bot6n de la aHmentaci6n (POWER)- POlselo para

encender y apagar el televisoljvideograbadora. Pdlselo

para activar la grabacidn con temporizador.

Botches de volumen (VOLUME A /V)- Ajustan

el nivel del volmnen.

Botches de canaies (CHANNEL _,/T)- POlselos

para seleccionar los canales deseados para ver o grabar.

Ventanilla sensora del mando adistancia-

Recibe las sefiales infrarrojas procedentes del mando a

distancia.

Botdn de parada (STOP)- POlselo para detener la

cinta.

Botdn de expulsidn (EJECT)-P(Ilselo en el modo

de parada para expulsar la cinta del

televisor/videograbadora.

Botdn _v

, Pdlselo para seleccionar los modos de ajuste desde el

mendde la pantalla.

, P(llselo para introducir dfgitos cuando establezca un

programa.

(Pot cjemplo: Para ajustar el reloj o establecer un pro-

grama de temporizador)

- 28 ES

0129

- PANEL TRASERO -

8Bot6n de rebobinado (REW)- Plilselo para

rebobinar la cinta, o para ver la imagen en retroceso

rfipido durante el modo de reproducci6n. (Btlsqueda

coil rebobinado)

Botdn _1

Plilselo para seleccionar un modo desde un memlpar-

ticular.

(Por ejemplo: IDIOMA o ADJUST DE USER)

9Botdn de reproduccidn (PLAY)- Ptilselo para ini-

ciar la reproducci6n.

Bot6n •

• Pfilselo para seleccionar los modos de ajuste desde el

memlde la pamalla.

• Ptilselo para introducir dlgitos cuando establezca un

programa.

(Por ejemplo: Para ajustar el reloj o establecer un pro-

grama de temporizador)

10 Botdn de avance rfipido (F.FWD)- Ptilselo para

avanzar r@idmnente la cinta, o para ver la imagen ell

avance rfipido durante el modo de reproducci6n.

(Btlsqueda con avance rfipido)

Botdn I_

• Cuando establezca un programa (por ejemplo: para

ajustar el reloj o para establecer un programa de tem-

porizador), ptilselo para determinar su elecci6n y vaya

al paso siguiente que quiera imroducir.

• Ptilselo para determinar los modos de ajuste desde el

memide la pamalla.

• Ptilselo para seleccionar un modo desde un memipar-

ticular.

(Por ejemplo: IDIOMA o ADJUST DE USER)

It Botdn de grabacidn (REC)- Ptilselo para iniciar la

grabacidn manual.

Bot6n de grabaci6n de un toque (OTR)- Activa

la grabaci6n de un toque. ($61o ell el

televisor/videograbadora)

12 Indicador de grabacion (RECORD)- Parpadea

durante la grabaci6n.

Se enciende ell el modo de espera de la grabaci6n con

temporizador.

13 Toma de auriculares (EARPHONE)- Para conec-

tar los auriculares (no suministrados) y escuchar ell

privado. La toma es mono y tiene un tamafio de 3,5

lnln.

Se puede mostrar el metal principal ell la pantalla del

televisor pulsando mpetidamente este botdn del televi-

sor/videograbadora.

27 28

Funcion de seguimiento- Pulse los botones para

minimizar el ruido de vkleo (lfneas o puntos ell la pan-

talla) durante la reproducci6n.

14 Compartimiento del videocasete

15 Botones numerados- Ptilselos para selecciom, r los

canales deseados para ver o grabar. Para seleccionar

canales del 1 al 9, pulse primero el botdn (1 y luego el

bot6n 1 a 9.

Bot6n +100-Cuando seleccione canales de tele-

visidn por cable cuyo mhnero sea superior al 99, pulse

primero este bot6n, y luego pulse los dos tiltimos digi-

tos. (Para seleccionar el canal 125, pulse primero el

bot6n "+100" y luego el "2" y el "5".)

16 Bot6n de menti (MENU)- Ptilselo para visualizar el

memlprincipal ell la pantalla del televisor.

17 Botdn del visualizador (DISPLAY)- Visualiza el

contador o el ntlmero del canal actual y la hora actual

ell la pantalla del televisor.

18 Botbn de velocidad de cinta (SPEED)- Pt_lselo

para elegir la velocidad de grabacidn deseada: SP/SLP.

19 Boton T-PROG. CLEAR- Ptilselo para cancelar un

programa de temporizador.

Boton de reposicion del contador (COUNTER

RESET)- Ptilselo para reponer el eontador a 0:(10:(10,

20 Boton de juego (GAME)- Establece el modo del

juego y el modo de entrada extema al mismo tiempo.

21 Boton de cfimera lenta (SLOW)- Pulselo para

activar la reproducci6n a cfimera lenta.

22 Botdn de pausa/imagen fija (PAUSE/STILL)-

Ptilselo para detener temporalmente la cinta durante la

grabaci6n o para ver una imagen fija durante la repro-

ducci6n.

23 Boton de silenciamiento (MUTE)- Silencia el

sonido. Ptilselo de nuevo para recuperar el sonido.

24 Boton de retorno de canal (CHANNEL

RETURN)- Ptilselo para volver al canal anterior. Por

ejemplo, pulsando una vez este bot6n, la visualizaci6n

del canal cambiarfi de 3 (canal actual) a 10 (canal ante-

rior), y al pulsarlo por segunda vez, el canal cambiarfi

del 10 al 3.

25 Boton del temporizador despertador/para

dormir (WAKE-UP/SLEEP)- Ajusta el tempo-

rizador para despertarse/dormir.

26 Botdn de televisor/modulacion de frecuencia

(TWFM) - Establece el modo FM.

27 Cordon de alimentacion- Con&telo a la toma de

CA estfindar (120V/60Hz).

28 Terminal de antena (ANT.)- Para conectar una

antena o sistema de televisi6n por cable.

(}129

Desde el cable coaxial o

caja de emisiones vfa 1 __An

Caja de CATV sat_lite de 75 ohm del tena combinada de

Antena de varilla UHF/VHF "_ VHF/UHF

_(inclu/do para solamente 13") ,[[. (uo inclufdo)

sistema de Cat le o

, de

de" bm(u° M [

VHF

(no inclufdo)

Amena UHF

(no inclufdo)

AN2 ENA COMYlNADA l)d;] VHbTUHF

La antena de varilla de VHF/UHF (inclufdo para solamente

13") es desmontable. Inserte el vfistago de la antena en el

agujero de la parte trasera superior del

televisor/videograbadora.

Conecte la varilla de antena de VHF/UHF o la antena com-

binada de VHF/UHF al terminal ANT. del

televisor/videograbadora.

ANTI;NA S9t';d3{ZgADAS DE VHF/UdIF

En algunos lugares seri necesario utilizar una antena exte-

rior.

CABLE S_N C(}NWER] [DOR/DES( OD_F_CAI)()R

Utilice esta conexi6n si su sistema de televisi6n por cable

se conecta directamente a su televisoffvideograbadora sin

convertidor.Utilizando esta conexi6n usted podrii:

1) Utilizar el mando a distancia del televisor/videograbado-

ra para seleccionar canales.

2)Programar uno o rolls canales sin codificar para malizar

la grabaci6n automfitica con temporizador.

NOTA: Con esta unidad SOLO se podrfi grabar y ver un

mismo canal al mismo tiempo.

( AI_I E CON ( ONVERFIDORiDESCODH'I( ADOR

0CONVERI IDOR DE EM_SIONES V_A SAIEI II E

Si su servicio de televisi6n por cable le suministra un con-

vertidor, o si usted utiliza un sistema de emisiones via

satdlite, usted podrfi utilizar las conexiones bilsicas.

Utilizando estas conexiones, usted tambidn podrfi grabar

canales codificados. Sin embargo, la selecci6n de los

canales deberfi hacerse con el convertidor de televisi6n por

cable con el convertidor de emisiones vfa satdlite. Esto sig-

nifica que los canales no podnln set cambiados con el

mando a distancia del televisor/videograbadora. La

grabaci6n inatendida se limim a un canal cada vez.

PARA GRABAR UN CANAL

CODIFICADO/DESCODIFICADO

1. Ajuste el selector de canales del televisor/videograbado-

ra al canal de salida del convertidor de televisi6n por

cable o del convertidor de emisiones vfa satdlite. (Ej.:

CA3)

2. Seleccione el canal que desee grabar de su convertidor

de televisi6n por cable odel convertidor de emisiones

vfa satdlite.

30 ES

0129

Cuando utilice una serial de entrada externa (otra

videograbadora o una videoc_imara), conecte los cables de

salida de audio/vfdeo del equipo de reproduccidn a las

tomas AUDIO IN/VIDEO IN de su

televisor/videograbadora. Y luego pulse el bot6n CHAN-

NEL • o • hasta que "AUX" aparezca en la pantalla.

Usted puede programar el temporizador para que explore

todos los canales que puedan recibirse en su zona.

1) Abra la tapa del compartimiento de las pilas del mando

a distancia presionfindola en el sentido de la flecha.

2) lnserte 2 pilas tamario "AA" en el compartimiento de las

pilas, en el sentido indicado por las marcas de polaridad

(+/-).

3)Vuelva a poner la tapa.

1) Enchufe el cable de alimentaci6n del

televisor/videograbadora en una toma de CA estfindar.

NOTA: Si aparezcan algunos digitos en el rincdn de la

pantalla, pulse el botdn POWER sin desenclmfar el cable

de alimentaci6n.

2) Pulse el botdn POWER para encender el

televisor/videograbadora.

3) Seleccione "ENGLISH" o "ESPAiqOL" utilizando el

botdn EFWD/I_ o REW/_I. "[ 1" indica el idioma

seleccionado.

4) Pulse el bot6n PLAY/• o STOP/• para serialar

"AUTOPRESELECCION".

Luego pulse el bot6n EFWD/_. El sintonizador explo-

rar_ y memorizar_ todos los canales activos de su _rea.

NOTAS:

• El televisor/videograbadora distingue entre los canales

de televisi6n est_ndar y los canales de televisor por

cable.

• Si desea reproducir o grabar una cinta ANTES de prea-

justar el sintonizador, usted tendril que pulsar el botdn

MENU en el mando a distancia. Para preajustar de

nuevo el sintonizador, consulte "REPETICION DE LA

PREPARACI()N DE CANALES".

• La unidad de televisor/videograbadora puede reconocer

los canales de TV como ellos de TV por cable a causa

de los condiciones de recepci6n. En este caso, pruebe el

preajuste automfitico de nuevo en los condiciones finas

de recepci6n.

5) El sintonizador se para en el canal memorizado mils

bajo. Si desea recuperar canales seleccionados, usted

podrfi seleccionar directamente el canal deseado con los

botones numerados del mando a distancia o con los

botones CHANNEL • o •.

Cercidrese...

• La alimentaci6n del televisor/videograbadora deberfi

estar conectada.

En el ejemplo de abajo, el iz, loj va a ajlcstarse aM:

FECHA: 7 de mayo de 2002

HORA: 5:40 PM

1) Pulse el bot6n MENU en el mando a distancia.

Pulse el botdn PLAY/• o STOP/• para indicar

"AJUSTE RELOJ".

Luego, pulse el botdn EFWD/_.

2) Pulse el botdn PLAY/• o STOP/• para indicar

"AJUSTE MANUAL RELOJ".

Luego, pulse el bot6n EFWD/I_.

3) Pulse el botdn PLAY/• o STOP/• hasta que aparezca

el rues deseado. (Ejemplo: Mayo - 05)

Luego, pulse el botdn EFWD/_.

4) Pulse el botdn PLAY/• o STOP/• hasta que aparezca

el dfa del rues deseado. (Ejemplo: 7 - 07)

Luego, pulse el bot6n EFWD/I_.

5) Pulse el botdn PLAY/• o STOP/• hasta que aparezca

el afio deseado. (Ejemplo: 2002)

Luego, pulse el bot6n EFWD/I_.

6) Pulse el botdn PLAY/• o STOP/• hasta que aparezca

la hora deseada. (Ejemplo: 5, PM)

Luego, pulse el botdn EFWD/_.

7) Pulse el botdn PLAY/• o STOP/• hasta que aparezca

el minuto deseado. (Ejemplo: 40)

8) Pulse el botdu MENU en el mando a distancia. Aunque

los segundos no se visualizan, 6sms empiezan a contar

desde 00 cuando se pulsa MENU en el mando a distan-

cia. Utilice esta funcidn para sincronizar el reloj con la

hora correcta.

31 ES

SYLVANIA

LIMITED WARRANTY

FUNAI CORP. will repair tiffs SYLVANIA product, free of charge in tile USA in tile event of defect in materials

or worl¢manship as l_)llo_vs:

DURATION:

PARTS: FUNAI CORP. will provide parts to re 31ace def_ctiveparts without charge for one (1) year from

tile date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded

fi'om this warranty.

LABOR: FUNAI CORP. will provide tile labor without charge for a period of ninety (90) days from tile date

of original retail purchase.

LIMITS AND EXCLUSIONS:

This warranty is extended only to the original retail purchaser. A purchase receipt o1"other proof of original retail

purchase will be required together with the product to obtain service under this warranty.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing

or if service was attempted by an unauthorized service center. This FUNAI CORPORATION Limited warranty

does not apply to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It

does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product

not supplied by FUNAI CORR, or damage which results fi'om accident, misuse, abuse, mishandling, misapplica-

tion, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this

product or damage which results fi'om fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE

CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAl CORR AND lTS REPRESENTATIVES OR AGENTS SHALL lN NO EVENT BE LIABLE FOR ANY

GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARIS1NG OUT OF OR OCCASIONED BY THE

USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPL1ED, AND OF ALL OTHER LIABILITIES ON THE PART OF

FUNA1, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FIT-

NESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTA-

TIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNA1 AUTHORIZED

SERVICE CENTER. THIS WARRANTY IS VAL1D WHEN THE UNIT IS TAKEN TO A FUNAI AUTHO-

RIZED SERVICE FACILITY.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS

THAT VARY FROM STATE TO STATE, IR AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE

UNABLE TO OBTA1N SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT

FUNA1 CORR

ATTENTION:

FUNAI CORR RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITH-

OUT PRIOR NOTICE.

To locate your nearest SYLVANIA Authorized Service Center or for general service procedure,

please call 1-800-968-3429 or write to the l_llowing:

FUNAI CORPORATION, INC.

Customer Service

100 North Street; Teterboro, NJ 07608

Tel :1-800-968-3429

PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.

Printed in Malaysia 0EMN01900

T5304 /7304UE * * * * *

SYLVANIA TV/VCR Or DVD Combo Manual L0610693

Navigation menu

Versions of this User Manual:

Views

Navigation