SZ DJI Osmo Technology RS11804 Ronin-S User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3841923
Application ID	/Hu0RQ8af7TmjjtzcDUm/w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	61.85kB (773159 bits)
Date Submitted	2018-05-07 00:00:00
Date Available	2018-06-21 00:00:00
Creation Date	2018-04-27 14:01:38
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2018-05-07 18:17:40
Document Title	Microsoft Word - User Manual英
Document Creator	PScript5.dll Version 5.2.2
Document Author:	DG06188

Ronin‐S Quick Start Guide
Introduction
Designed for DSLR and mirrorless cameras, the Ronin‐S combines advanced stabilization,
precision control, and manual focus control capabilities in a compact, single‐handed form factor.
With the Ronin‐S, creators can shoot with the freedom of stabilized shots on the move.
Ronin‐S comes with several buttons that allows switching between different parameter groups
and operating modes easily. The updated SmoothTrack technology and the new Sport mode
makes shooting more intelligently. The Ronin‐S supports mounting on other platform like tripod,
etc. The accessories ports providing full support for add‐ons such as a microphone, LED lights,
and even a wireless video transmitter. Ronin‐S is also compatible with DJI control devices such as
Master Wheels and Force Pro.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
Hotshoe Module
Roll Motor
Pan Motor
Profile LED Indicators
Power Button
Joystick
M Button
Record Button
Battery Grip
Tripod
8‐Pin Connector
M4 Mounting Hole
Tilt Motor
12V Accessory Power Port
USB‐C Port
Trigger
Battery Level Button/Indicators
8‐Pin Connector
M4 Mounting Hole
Camera Control Port
Camera Mounting Base
Getting Started
A． Download the Ronin App and Watch the Tutorials.
Search for “Ronin” in the App Store or Google Play and follow the instructions for installation.
Watch the tutorial on the official DJI website.
https://www.dji.com/ronin‐s
B． Charge the Battery
Charge the battery grip using the provided USB Power Adapter and USB‐C cable by
connecting to the USB‐C port on the gimbal.
Mounting the Battery Grip
Attach the gimbal to the battery grip by sliding into the dovetail mount. Toggle the lever to the
locked position after mounting firmly.
Attaching the Tripod
Attach the provided tripod to gimbal, toggle the safety lock to the locked position after tighten,
and then extend the tripod as shown.
Mounting the Camera
1. Attach the Hotshoe module to the gimbal as shown.
2. Attach the riser plate to the bottom of the camera.
3. Attach the camera dovetail plate and lens support.
4. Slide the camera to the camera mounting base. When reach a roughly back and forth balance,
toggle the lever to the locked position after the safety lock is engaged.
5. Attach the hotshoe module to the top of the camera.
Balancing
1. Balancing the Vertical Tilt
a. Rotate the tilt axis so that the camera lens is pointing up. Hold the tilt axis motor to
ensure the roll axis maintains horizon, and find the camera whether it’s bottom heavy or
top heavy.
b. Loosen the knob on the tilt motor, adjust the camera’s balance until the camera remains
still without tilting up or down.
c. Tighten the knob.
2. Balancing Depth for the Tilt Axis
a. Rotate the tilt axis so that the camera lens is pointing forward. Hold the tilt motor to find
whether it’s bottom heavy or top heavy.
b. Toggle the lever to the unlocked position and loosen the hotshoe knob, adjust the
camera’s balance until the camera remains still when rotating the tilt axis 45 degrees
upwards or downwards.
c. Toggle the lever to the locked position and tighten the hotshoe knob.
3. Balancing the Roll Axis
a. Let go of the tilt motor and observe in which direction the motor swings.
b. Loosen the roll axis knob and adjust the camera’s balance until the camera remains still
when rotating the tilt axis 45 degrees to the left or right.
c. Tighten the knob.
4. Balancing the Pan Axis
a. Grab the battery grip then tilt the entire Ronin‐S sideways and observe how the pan axis
spins.
b. Loosen the knob on pan motor, adjust the camera’s balance until the camera remains
still when rotating the pan axis 45 degrees while lifting the grip.
c. Tighten the knob.
Activating the Ronin‐S
1. Press and hold the Power button to turn on the Ronin‐S.
2. On your mobile device, switch on Bluetooth and launch the Ronin App.
3. With a secure internet connection, follow the onscreen instructions to activate Ronin‐S for
the first time.
Operations
1. Auto Tune: Launch the Ronin App and Enter the Motor settings page and select Auto Tune.
You can also manually adjust the Stiffness. Strength, Filter, and Control values are advanced
settings and should only be adjusted with proper knowledge.
2. Enter the SmoothTrack settings page to adjust Speed, Deadband, and Acceleration values for
the pan, tilt, and roll axes separately. There are 3 profiles in total so you can easily prepare
the most suitable settings sequentially and then quickly switch in between them with a
simple press on the ‘M’ button.
3. Push the Joystick up or down to control tilt axis movement. Push the Control Joystick left or
right to control pan axis movement.
4. Press the record button to start/stop recording. (Camera control cable connection is
required)
5. Trigger: Press and hold the trigger to enter lock mode. Press twice to recenter the gimbal.
Press three times to take a selfie.
Specifications
Weight
Dimensions
Approx.2.04 kg (gimbal, battery grip and
tripod included)
Approx. 293×256×590 mm
Input Power
Model:RB1-2400mAh-14.4V
Type:LiPo
Capacity:2400mAh
Energy:34.56Wh
Working Current
Static Current: 0.16 A
Operating Frequency
2400MHzto2483.5MHz
Transmitter Power
‐2.13 dBm
Max. Antenna Gain
0.3dBi
‐4° to 113° (‐20℃ to 45℃)
Operating Temperature
Compliance Information
FCC Compliance Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co_located or operating in conjunction with any other
antenna or transmitter.
ISEDC RSS Warning
This device complies with ISEDC licence‐exempt RSS standard (s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference,including interference that may cause undesired operation of the device.
Le présent areil est conforme aux CNR d'ISEDC licables aux areils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'areil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co‐located or operating in conjunction with any other
antenna or transmitter.
Cet appareil est
Conforme aux limitesd'exposition de rayonnement RF ISEDC établiespour un environnement non
contrôlé.
Cetémetteur ne doit pas être co‐implanté oufonctionner en conjonction avec toute autreantenne
ou transmetteur.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
KCC Warning Message
“해당 무선설비는 운용 중 전파혼신 가능성이 있음”
인증받은자의상호: SZ DJI Osmo Technology Co., Ltd.
제품명/모델명: 특정소출력무선기기(무선데이터통신시스템용무선기기)RS1
제조자및제조국가: SZ DJI Osmo Technology Co.,Ltd. /China
제조년월: 2018‐04
인증번호: R‐CRM‐osm‐RS1
해당 무선설비는 전파혼신 가능 성이 있으므로 인명안전과 관련된
서비스는 할 수 없음
NCC Warning Message
低功率電波輻射性電機管理辦法
第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自
變更頻率、加大功率或變更原設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，
應改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功
率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
EU Compliance Statement: SZ DJI Osmo Technology Co., Ltd. hereby declares that this device is in
compliance with the essential requirements and other relevant provisions of the RED Directive.
A copy of the EU Declaration of Conformity is available online at www.dji.com/euro‐compliance .
Warning: Operation of this equipment in a residential environment could cause radio interference.
EU contact address: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
Declaración de cumplimien to UE: SZ DJI Osmo Technology Co., Ltd. por la presente declara que
este dispositivo cumple los requisitos básicos y el resto de provisiones relevantes de la RED
Directiva.
Hay disponible online una copia de la Declaración de conformidad UE en
www.dji.com/euro‐compliance.
Dirección de contacto de la UE: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
EU‐verklaring van overeenstemming: SZ DJI Osmo Technology Co., Ltd. verklaart hierbij dat dit
apparaat voldoet aan de essentiële vereisten en andere relevante bepalingen van RED Richtlijn.
De
EU‐verklaring
van
overeenstemming
is
online
beschikbaar
op
www.dji.com/euro‐compliance
Contactadres EU: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
Declaração de conformidade da UE: A SZ DJI Osmo Technology Co., Ltd. declara, através deste
documento, que este dispositivo está em conformidade com os requisitos essenciais e outras
disposições relevantes da RED Diretiva.
Existe uma cópia da Declaração de conformidade da UE disponível online em
www.dji.com/euro‐compliance
Endereço de contacto na UE: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
Dichiarazione di conformità UE: SZ DJI Osmo Technology Co., Ltd. dichiara che il presente
dispositivo è conforme ai requisiti essenziali e alle altre disposizioni rilevanti della RED direttiva.
Una copia della dichiarazione di conformità UE è disponibile online all'indirizzo Web
www.dji.com/euro‐compliance
Indirizzo di contatto UE: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
Déclaration de conformité UE : Par la présente, SZ DJI Osmo Technology Co., Ltd. déclare que cet
appareil est conforme aux principales exigences et autres clauses pertinentes de la RED directive
européenne.
Une copie de la déclaration de conformité UE est disponible sur le site
www.dji.com/euro‐compliance
Adresse de contact pour l'UE : DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
EU‐Compliance: Hiermit erklärt SZ DJI Osmo Technology Co., Ltd., dass dieses Gerät den
wesentlichen Anforderungen und anderen einschlägigen Bestimmungen der RED‐Richtlinie
entspricht.
Eine Kopie der EU‐Konformitätserklärung finden Sie online auf www.dji.com/euro‐compliance.
Kontaktadresse innerhalb der EU: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste,
but have to be disposed of separately. The disposal at the communal collecting point
via private persons is for free. The owner of old appliances is responsible to bring the
appliances to these collecting points or to similar collection points. With this little
personal effort, you contribute to recycle valuable raw materials and the treatment
of toxic substances.
Thailand Warning message
เครื่ องโทรคมนาคมและอุปกรณ์น้ ี มีความสอดคล้องตามข้อกําหนดของ กทช.
Mexico Warning message
“La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que
este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe
aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.”
Brazil Warning message
Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra
interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a
sistemas operando em caráter primário
UAE logo requirements
The characters shall appear in black print against a white background.
No character shall be less than 2mm in height.
The letters “TRA” shall be atleast 3mm in height.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : DG06188
Create Date                     : 2018:04:27 14:01:38+08:00
Modify Date                     : 2018:05:07 18:17:40-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:05:07 18:17:40-07:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - User Manual英
Creator                         : DG06188
Document ID                     : uuid:4f9712b1-2008-464d-809f-78451558494f
Instance ID                     : uuid:03a521e3-6304-458d-8b22-78e4b692c724
Page Count                      : 13

EXIF Metadata provided by EXIF.tools