SZ DJI TECHNOLOGY DLA30A1702 DATALINK 3 User Manual en x

Download:
Mirror Download [FCC.gov]
Document ID	3375175
Application ID	J6iAYuR4VKYykMjxqMwMXg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	41.73kB (521612 bits)
Date Submitted	2017-04-28 00:00:00
Date Available	2017-10-24 00:00:00
Creation Date	2017-04-05 19:58:02
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2017-04-28 09:33:25
Document Title	Microsoft Word - user manual_en_.docx
Document Creator	PScript5.dll Version 5.2
Document Author:	elena

DAT AL I N K
Quick Start Guide
V1.0
Disclaimer
Congratulations on purchasing your new DJI™ product. The information in this document affects
your safety and your legal rights and responsibilities. Read this entire document carefully to ensure
proper configuration before use. Failure to read and follow instructions and warnings in this
document may result in serious injury to yourself or others, damage to your DJI product, or damage
to other objects in the vicinity. This document and all other collateral documents are subject to
change at the sole discretion of DJI.
By using this product, you hereby signify that you have read this disclaimer and warning carefully
and that you understand and agree to abide by the terms and conditions herein. You agree that you
are solely responsible for your own conduct while using this product, and for any consequences
thereof.
You agree to use this product only for purposes that are proper and in accordance with all
applicable laws, rules, and regulations, and all terms, precautions, practices, policies and guidelines
DJI has made and may make available.
DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly
from the use of this product. The user shall observe safe and lawful practices including, but not
limited to, those set forth in this document.
Notwithstanding above, your statutory rights under applicable national legislation are not affected
by this disclaimer.
Warning
1. Always stay alert when using the DATALINK 3. Carelessness may result in serious harm to
yourself and other people.
2. DJI provides User Manual for you to understand DATALINK 3. Be sure to read the user manual
thoroughly and the quick start guide prior to operating your DATALINK 3.
DAT AL I N K
DJI DATALINK 3 is a long range video downlink capable of transmitting data at distances up to 3 km*.
It is compatible to DJI series flight controllers ** and other non‐DJI flight controllers***. DJI DATALINK
3 includes a ground system and an air system, which can be operated under the frequency of 2.4
GHz. The multi‐functional ports on the air system enable users to set SBUS, DBUS, CAN, and UART
alone or altogether, satisfying various needs and applications. DATALINK 3 integrates the remote
controller module into the Ground System, which comes with a number of aircraft and gimbal
controls as well as some customizable buttons. By using Channel Settings, i.e. DJI ASSISTANT™ 2 for
DJI series flight controllers, the buttons on the remote controller can be customized to meet
different requirements in photography, mapping, agriculture, etc. When used with either MG‐FE™
or GS Pro* apps, users will be able to see and change live parameters, completing complex tasks
more easily. The remote controller boosts a maximum working time of 24 hours*.
* The remote controller is able to reach its maximum transmission distance SRRC in a wide open
area with no Electro‐Magnetic interference, and at an altitude of about 100 meters.
**Refer to the Specifications for details on supported DJI flight controller series.
***Coming soon
Ground System (C1 Remote Controller)
1.
1. Power Button
13. Dial RW*
2. RTH Button
14. D Button*
3. SW2 Switch*
15. SW1 Switch*
4. Status LED
16. A Button*
5. Battery Level LEDs
17. B Button*
6. Power Port
18. C1 Button*
7. Control Sticks
19. Micro USB Port
8. Mobile Device Holder
20. CAN/UART Port
9. Small Device Positioning Tabs
21. USB Port
10. Antennas
22. C2 Button*
11. Handle Bar
*Customizable via channel
setting.
12. Dial LW*
Air System
1. Firmware Update Port Micro
USB
2. CAN Port
5. Linking Button
6. Antenna Ports
7. Power Port
3. UART Port
8. DBUS/SBUS Port
1. Downloading MG‐FE or GS Pro
Scan the QR code below or visit the App Store to download DJI's MG‐FE or GS Pro apps.
MG‐FE
GS Pro
*DJI MG‐FE only supports some mobile devices with Android 4.4 or above. Refer to Specifications
for more details. GS Pro is only supported on the iPad.
2. Battery Level and Charging
Press the power button once to check the battery level. Press and hold for 2 seconds to power on
the remote controller.
Low to High
Please use the included charger to charge the remote controller, when the power level is low. It is
recommended to charge the remote controller with the power off. Please recharge the battery at
least every three months to ensure it remains in a fully charged state – the battery will deplete when
stored for long periods.
It takes about 4 hours to fully charge the remote controller.
3. Linking
Example: DJI N3 Flight Controller.
a. Insert the antennas into the ports on the side of the air system and snap into place.
b. Connect the DBUS/SBUS port on the air system with the RF port on the DJI flight controller series
using the provided DBUS cable.
c. Power on the remote controller and press the C1, C2 and D buttons simultaneously. The Status
LED will blink blue and make a warning sound, indicating that linking has started.
d. Press the Linking Button on air system. Status LEDs on both the remote controller and the air
system will be solid green when linking is complete.
4. Preparing Your Remote Controller
Unfold the remote controller
a. Press the clamp on the mobile
device holder.
b. Adjust the mobile device hold
to tighten the mobile device.
c. Connect the mobile device and
the remote controller via a Micro
USB cable.
Strong
Weak
5. Flight
DJI's series of Flight Controllers have a default flight mode is known as Mode 2. The left stick
controls the aircraft's altitude and heading, while the right stick controls forward, backward, and
left and right movements.
Combination stick command to start/stop the motors
Push the left stick up slowly for take off
Pull the left stick down slowly until you touch the ground. Hold down for a few seconds to stop the
motors
Refer to Datalink 3 User Manual for more operation information.
6. Industrial Application
With numerous customizable buttons, which can be channel set by using compatible flight
controller software, the C1 remote controller can be applied to agriculture, mapping and
photography, and will support more industrial applications.
The C1 Remote Controller does not support image transmission and does not have a
GPS module. Please mount the GPS module on the remote controller when necessary.
Refer to the DJI Datalink 3 User Manual.
Specifications
General
•
•
•
•
•
Max Transmission Distance unobstructed, free of interference : 3 km SRRC
Operating Frequency: 2.400GHz to 2.483GHz
Transmitter Power dBm : 20dBm
Supported DJI Flight Controllers: N3, A3, N3‐AG, A3‐AG
Supported Android Mobile Devices For MG‐FE : Android 4.4 and above
Ground
d System C1
C Remote Controller
•
Model: DLG
G30A
•
•
•
•
Dimensionss 182 172 71 mm
Charging Teemperature Range: 32° to 104° F 0° to 40° C
Built‐in batttery: 6000m
mAh LiPo 2S
Operating V
Voltage: 1.2A
A @7.4V
Air Systtem
•
•
•
•
•
Model: DLA
A30A
Dimensionss antennas excluded : 50.6
35 10.7 mm
Weight anttennas exclu
uded : 23 g
Operating V
Voltage: 8V~
~30V
Operating T
Temperaturee Range: 14° to 122° F ‐10° to 50°° C
GPS Mo
odule
•
•
•
•
Satellite Possitioning Systems: GPS//GLONASS
Max. Curren
nt: 125 mA
Max. Voltagge: 5.3 V
Weight: 33.9 g
Charger
•
•
Voltage： 1
17.4V
Rated Poweer： 57 W
SZ DJI TECHNOLOGY CO., LTD. hereb
by declares that this device is in co
ompliance with
w the
essentia
al requirements and otther relevan
nt provisionss of the RED Directive.
A copy of the EU Declaration
of Conform
mity is availa
able online at
a www.dji.ccom/euro-co
ompliance
EU contacct address: DJI GmbH, Industriesttrasse. 12, 97618, Nied
derlauer, Germany.
For dettailed inforrmation, pleease visit th
he website and downlload the lattest user manual.
http:///www.dji.co
om/cn/pro
oduct/xxxxxxxxxxx
This co
ontent is subject to chaange.
FCC Compliance Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
For Air System (DLA30A):
This device should be installed and operated with minimum distance of 20 cm between the radiator & your body.
For Remote controller (DLG30A):
This device has been tested and meets applicable FCC limits for radio frequency (RF) exposure. Specific Absorption
Rate (SAR) refers to the rate at which the body absorbs RF energy. During SAR testing, the device is set to the
highest transmission levels and placed in positions that simulate use near the body with 10 mm separation and
against the hand, with no separation. To ensure exposure levels remain at or below the as-tested levels, use the
accessories designated and tested with this product. Accessories with metal parts may change the RF performance of
the device, including its compliance with RF exposure guidelines, in a manner that has not been tested or certified.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : elena
Create Date                     : 2017:04:05 19:58:02+07:00
Modify Date                     : 2017:04:28 09:33:25-07:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2017:04:28 09:33:25-07:00
Format                          : application/pdf
Title                           : Microsoft Word - user manual_en_.docx
Creator                         : elena
Document ID                     : uuid:05e0192e-8a7d-4c0a-954b-6c291f7f760f
Instance ID                     : uuid:af33b5c1-b2fc-48a7-a307-f0034be50b10
Page Count                      : 9

EXIF Metadata provided by EXIF.tools