SZ DJI TECHNOLOGY FC2001307 WiFi enabled Camera User Manual
SZ DJI TECHNOLOGY CO., LTD WiFi enabled Camera
User manual
PHANTOM VISION User Manual V1.00 DJI Camera FC200 2013.0614Revision For NAZA-M Firmware Version V3.12 & Assistant Software Version V2.12 Thank you for purchasing this DJI product. Please strictly follow these steps to use this product, including PHANTOM VISION and DJI VISION App. Please regularly check the web page of PHANTOM www.dji-innovations.com, which is updated regularly. VISION at our website Product information, technical updates and manual corrections will be available on this web page. Due to unforeseen changes or product upgrades, the information contained in this manual is subject to change without notice. This manual is only referenced for basic assembly and configuration; you can obtain more details and advanced instructions when using the Assistant software or DJI VISION App. To assure you have the latest information, please visit our website and download the latest manual and software. If you have any problem that you cannot solve during usage, please contact your dealer. © 2013 DJI Innovations. All Rights Reserved. Index INDEX .............................................................................................................................2 DISCLAIMER & WARNING ...............................................................................................3 TRADEMARK ..................................................................................................................4 CERTIFICATIONS .............................................................................................................4 SYMBOL INSTRUCTION ...................................................................................................4 IN THE BOX .....................................................................................................................4 PRODUCT INSTRUCTION .................................................................................................4 ASSEMBLY ............................................................................................................................5 AIRCRAFT RECOGNITION ..........................................................................................................5 TRANSMITTER RECOGNITION ....................................................................................................6 BASIC USAGE OF AIRCRAFT AND TRANSMITTER ............................................................................6 CAMERA RECOGNITION ...........................................................................................................7 RANGE EXTENDER RECOGNITION...............................................................................................8 CAMERA AND RANGE EXTENDER REBIND ....................................................................................9 DJI VISION APP ............................................................................................................. 10 DOWNLOAD AND INSTALLATION ..............................................................................................11 WI-FI NETWORK SELECTION ..................................................................................................11 LOGIN ................................................................................................................................11 MAIN PAGE ........................................................................................................................12 CAMERA PAGE.....................................................................................................................13 CAMERA PAGE--CAMERA SETTINGS .........................................................................................14 ALBUM PAGE—ALBUM IN CAMERA SD CARD ...........................................................................17 ALBUM PAGE—ALBUM IN MOBILE DEVICE ................................................................................19 NEWS PAGE ........................................................................................................................20 SETTINGS PAGE....................................................................................................................20 APPENDIX ..................................................................................................................... 22 MC/PMU FIRMWARE UPGRADE ............................................................ 错误!未定义书签。 © 2013 DJI Innovations. All Rights Reserved.2 | AUTOPILOT SYSTEM LED DESCRIPTION .....................................................................................23 SPECIFICATION .....................................................................................................................23 Disclaimer &Warning Please read this disclaimer carefully before using the product. By using this product, you hereby agree to this disclaimer and signify that you have read them fully. THIS PRODUCT IS NOT SUITABLE FOR PEOPLE UNDER THE AGE OF 18. Despite the built-in autopilot system and our efforts in making the control as safe as possible, we strongly recommend users to remove all propellers when calibrating and setting parameters. Make sure all connections are good, and keep children and animals away during firmware upgrade, system calibration and parameter setup. DJI Innovations accepts no liability for damage(s) or injuries incurred directly or indirectly from the use of this product in the following conditions: 1. Damage(s) or injuries incurred when users are drunk, taking drugs, drug anesthesia, dizziness, fatigue, nausea and any other conditions no matter physically or mentally that could impair your ability. 2. Damage(s) or injuries caused by subjective intentional operations. Any mental damage compensation caused by accident. 3. Failure to follow the guidance of the manual to assemble or operate. 4. Malfunctions caused by refit or replacement with non-DJI accessories and parts. 5. Damage(s) or injuries caused by using third party products or fake DJI products. 6. Damage(s) or injuries caused by mis-operation or subjective mis-judgment. 7. Damage(s) or injuries caused by mechanical failures due to erosion, aging. 8. Damage(s) or injuries caused by continued flying after low voltage protection alarm is triggered. 9. Damage(s) or injuries caused by knowingly flying the aircraft in abnormal condition (such as water, oil, soil, sand and other unknown material ingress into the aircraft or the assembly is not completed, the main components have obvious faults, obvious defect or missing accessories). 10. Damage(s) or injuries caused by flying in the following situations such as the aircraft in magnetic interference area, radio interference area, government regulated no-fly zones or the pilot is in backlight, blocked, fuzzy sight, and poor eyesight is not suitable for operating and other conditions not suitable for operating. 11. Damage(s) or injuries caused by using in bad weather, such as a rainy day or windy (more than moderate breeze), snow, hail, lightning, tornadoes, hurricanes etc. 12. Damage(s) or injuries caused when the aircraft is in the following situations: collision, fire, explosion, floods, tsunamis, subsidence, ice trapped, avalanche, debris flow, landslide, earthquake, etc. 13. Damage(s) or injuries caused by infringement such as any data, audio or video material recorded by the use of aircraft. 14. Damage(s) or injuries caused by the misuse of the battery, protection circuit, RC model and battery chargers. 15. Other losses that are not covered by the scope of DJI Innovations liability © 2013 DJI Innovations. All Rights Reserved.3 Trademark DJI and PHANTOM VISION are registered trademarks of DJI Innovations. Names of product, brand, etc., appearing in this manual are trademarks or registered trademarks of their respective owner companies. This product and manual are copyrighted by DJI Innovations with all rights reserved. No part of this product or manual shall be reproduced in any form without the prior written consent or authorization of DJI Innovations. No patent liability is assumed with respect to the use of the product or information contained herein Certifications This product is approved with quality standards such as CE, FCC and RoHS. Symbol Instruction Forbidden(Important) Cautions Tip Reference In the Box PHANTOM Aircraft X1 5.8GHz Transmitter X1 Camera X1 Range extender X1 Charger X1 Battery X1 PropellerX8 mobile device Mounting X1 Guide X1 Qu AC Adapter X3 Product Instruction © 2013 DJI Innovations. All Rights Reserved.4 ick St a t G uid Sticker(Several) Assembly Fig.1: PHANTOM VISION Fig.2: Transmitter& iOS & Range Extender AircraftRecognition Aircraft nose Propeller Rotor Direction LED Red Direction LED LED Indicator Green Antenna Damping Unit Power cable Landing Gear Compass Built-in Function NAZA-M Autopilot System (Refer to NAZA-M manual for details) GPS & Compass Module R/C Receiver ATTI./GPS ATTI. Mode Intelligent Orientation Control Enhanced Fail-Safe Low-Voltage Alert Takeoff Weight:<1200g Power System for Flight LED Indicator USB Interface (in the Battery Compartment) © 2013 DJI Innovations. All Rights Reserved.5 TransmitterRecognition Working Frequency: 5.8GHz ISM Control Channel Numbers of Transmitter: GPS ATTI ATTI OFF CL HL Communication Distance: 300m Receiver Sensitivity(1%PER): >-93dBm Power Consumption of Transmitter: < 20dBm Working Current/Voltage: 52 mA@6V AA Battery (5#): 4 Required Basic Usageof Aircraft and Transmitter Definitions Stick neutral position and stick released means the stick of Transmitter is pushed to the central position. Command Stick means the stick of Transmitter is pushed away from the central position. Transmitte Aircraft ( GPS ATTI. Mode/ATTI. Mode is the nose direction) Throttle stick is for aircraft up& down control.The aircraft will hold the height automatically if the stick is centered. You should Push the throttle stick to the neutral position to take-off the multi-rotor. Note that the stick returns to the central position when released for the transmitter V3.5. For the version below 3.5, the stick cannot hold the central position when released. Yaw stick is for aircraft rudder control. Command stick controls the angular velocity of the aircraft, with the maximum rudder angular velocity of 200°/s. Left stick command gives counter clock-wise rotation of the aircraft, & vice versa. Roll stick is for aircraft left/right control and Pitch stick is for front/back control. Command stick controls the angle of the aircraft.Stick neutral position is for 0˚, its endpoint is 35˚. The roll and pitch sticks return to the central position when released. In GPS Mode, the aircraft will hover (hold horizontal position) when sticks released. In ATTI. Mode, the aircraft will keep attitude stabilizing without horizontal position (different from hover in GPS © 2013 DJI Innovations. All Rights Reserved.6 Mode). 3-position switch (S1) on the Transmitter for mode control. Only after Compass Module connection and Compass GPS ATTI. ATTI. ATTI. calibration, GPS ATTI. Mode is available. Otherwise, all switch (Manual positions are for ATTI. Mode. Pay attention because the GPS ATTI. Mode is dependent on the number of GPS satellites or acquired by the main controller. Refer to the LED Indicator. Failsafe is When GPS signal has been lost for 3s, system enters ATTI. selectable Mode automatically. You can enable the Manual Mode or Fail Safe (also known as One-key Go-home) in the assistant in software->Basic->R/C->Control Mode. software.) 3-position switch (S2) on the Transmitter for Intelligent Orientation Control (IOC). Set the switch to OFF in basic flight. This function is defaulted to off. If you want to use this function refer to the advanced manual, and enable it in the OFF Course Lock Home Lock assistant software. Use IOC when you are familiar with basic flight. CameraRecognition [2] [1] [3] [4] [5] [1]Power Switch(on the back of the camera) Three stops: (1) OFF – Powered off (2) CAM ON – Power on, Wi-Fi off (3) WIFI ON –Power and Wi-Fi are both on [2]LED Indicator (on the back of the camera) LED Solid on © 2013 DJI Innovations. All Rights Reserved.7 WIFI CAMERA OFF Power On; Idle State Slow Blink (0.2s on, 1.8s off) ON Idle State Fast Blink (0.1s on, 0.3s off) ON Accessing photos and videos in the camera OFF Recording Blink Once(0.2s on, 0.3s off) ON/OFF making a single capture Blink 3 Times(0.1s on, 0.1s off) ON/OFF making a multiple capture,3 or 5 pictures per shot ON/OFF Firmware Upgrading ON Recording Solid on ON/OFF Critical error Blink Slow (0.2s on, 1.8s off) ON/OFF Sensor error Blink Once(0.2s on, 0.3s off) ON/OFF Operation failed Blink 3 Times(0.1s on, 0.1s off) ON/OFF SD Card error Blink Fast(0.1s on, 0.3s off) ON/OFF Upgrade error ON/OFF Camera overheat Solid on Fast Blink(0.1s on, 0.3s off) (0.2s green, 1.8s amber) (0.5s Green, 0.5s Amber, 0.5s Red, 0.5s Off) When camera temperature goes above 80℃, the LED indicator will blink and the camera will automatically power off when the temperature goes above 85℃ Statuses including Red is either error or malfunction [3]Micro-SD Card Slot(on the back of the camera) Make sure that the Micro-SD card is inserted before you take any pictures or make any videos. [4]Power Plug(on the back of the camera) [5]Function Button(on the bottom of the camera) Camera in idle state short press (<2s) single capture long press (≥2s) record Camera in non-idle back to idle state any press state Range ExtenderRecognition [1] [4] [2] [5] [3] [1]Switch: (1) OFF – Power off © 2013 DJI Innovations. All Rights Reserved.8 (2)ON –Power on [2]Rebind Button: press to rebind system. [3]USB Port: for charge the Range Extender. [4]Power Status Indicator Power Status Description Indicator The Green Solid on Range Extender is working normally. Red Solid on Low voltage alert. Yellow Solid on The Range Extender is charging. [5]Wifi Indicator Wifi Indicator Description The Range Extender system is working Green blink normally. The Range Extender system is working LED Off abnormally. Camera &Range Extender &DJI App Rebind In the condition that your camera or range extender has been repaired or replaced by a new one, you need to rebind camera and range extender to rebuilt a wifi-network, and use your DJI App to find the new wifi-network. Step1: power on the camera and range extender, 10s later press the rebind Button on Range Extender with a cuspidal object, 5s later the wifi indicator is out. Step2: wait patiently until the range extender restart automatically about 25s later, and the wifi indicator will blink green, which indicates camera and range extender are rebinded. Step3:open DJI App on your mobile device . © 2013 DJI Innovations. All Rights Reserved.9 Charger &Battery Instruction Battery:LiPo(2200MAH-20C-11.1V) Charger AC Input: 100-240V Charge Circuit:1A/2A/3A Selectable Current Drain for Balancing: 200mA Circuit Power:MAX 20W LED Indicator Ready to Charge Charge *If the charger is in Max Circuit Power condition, the charge circuit will be decided by 20W. For example, when CC Mode Status LED CV Mode Charge complete 2A or 3A is selected for the 3S battery, the Charge Circuit Charging Cell LED is only 20w/11v=1.8A actually. Discharging Charging 1. Insert the AC power cord into the charger and AC cord into a wall socket (100-240V). The charge status LED will flash green. 2. Select the battery type LiPo and the charging current 2A. 3. Connect the battery main charge lead to battery socket and the battery balance wire to the 3S balance socket.Make sure the red lead to the red battery socket, and the black lead to the black battery socket 4. Start charging. The charge status LED and the 1S/2S/3S cell LED will glow constant red. 5. When the charge status LED glows constant red, it is charging in CC (Constant Current)mode and LED glows green & red blink is in CV (Constant Voltage) mode. 6. When the cell LED is flashing, it is discharging for balancing. 7. When the battery is fully charged, the charge status LED will glow constant green.Unplug the battery from the charger. Make sure to use the battery after fully charging. When the charger is in CV mode (with green and red LED blinking), the battery is over 80% charged. Please use the battery according to the attached sticker. Use the Protection Clip to keep the leads of the battery socket untouched, in order to avoid short circuit. DJI VISION App DJI VISION App is installed for remote control of Camera Setting, Capture and Recording, Camera Pitch Control, Aircraft Yaw Control, and GPS Assistant Orientation. © 2013 DJI Innovations. All Rights Reserved.10 Downloadand Installation Approach 1:Search”DJI VISION”in the App Store, download and install it on your mobile device. Approach 2: Scan QR code to get the DJI VISION App and install it on your mobile device. Wi-Fi Network Selection 1) Turn on the WLAN of your mobile device and connect to the PHANTOM_xxxxxx (SSID) network for remote control by DJI VISION App. 2) Select a Wi-Fi network to the Internet if you want to share your photos or videosor read DJI news. Note1: For the first time you open the DJI VISION app, Internet accessibility is necessary for you to finish login or new account creation. Note 2: the SSID is unique for each Camera. Login [3] [4] [5] [6] [1] LoginButton: The first time you use the DJI VISION App you should login in. Note: (1) Internet accessibility is necessary. (2)You can change your user/password in the App Settings [2] RegisterButton Create a new account if you do not have one already. [3] [4][5]Login Page Enter your registered email address and password here. And then click [6] Forget Password If you do have an account, but forget the password, click to retrieve it. [7] Using Tips Using tips will display for welcoming your first entering into. © 2013 DJI Innovations. All Rights Reserved.11 to login. [7] Main Page After login you will come to the main page. In this page, you can see the current Wi-Fi connection, and four icons that represent the four functionalities of this App. Green Light Camera has been connected to, and the Camera and SD Card album are available. Blue Light Internet has been connected, photos and videos can be shared and DJI news can be refreshed. Gray Light Camera Album News Settings No Wi-Fi connection Click to enter the camera preview page Click to enter the Album page Click to enter the DJI news page Click to enter the App settings page [7] [8] [9] [10] [11] [12] [13] © 2013 DJI Innovations. All Rights Reserved.12 [14] Camera Page [1] [2] [3] [4] [5] [6] [1] Return to the preview page [2] Camera gimbal control switch 1) In normal state: the camera gimbal is controlled by the upwardarrow [3] on the preview page. Press 2) to turn up the camera, and and downward arrow [4] to turn down the camera. In high light state (blue): the camera gimbal is controlled by the iOS’s gyroscope sensor and gravity sensor. Pitch up Camera Original StateCamera Pitch Down [5] Flight attitude Click it to obtain the Pitch, Roll and Yawinformation, which can help you find the aircraft if the aircraft fly far away from you.It is also known as the Radar function. © 2013 DJI Innovations. All Rights Reserved.13 [17] [6]Flight parameters If the connection between the camera and the NAZA is ok, these “N/A”s should be meaningful digits [7] SD Card Status Highlighted when a valid SD card is inserted, otherwise, grayed out. [8] Wi-Fi Signal Intensity The Camera is connected to the Range Extender correctly and Wi-Fi is working normally. [9] Aircraft Battery Level 3 grids: > 11.80V 2 grids: 11.30V to 11.80V 1 grid: 11.20V to 11.30V (should fly back) 0 grid: <= 11.20V (should land immediately) [10] Aircraft GPS status Highlighted when more than 6 satellites are found, otherwise, grayed out. [11]Remained shots It is calculated based on the current selected photo size. Zero if SD card is not inserted [12] Camera Capture Button Capture Button is disabled during the process of recording. [13] Camera Record Button A red dot blinks when the camera is recording, and the time elapsed right corner of the preview screen. [14] Hide or show camera settings Click to enter camera settings, and click again to exit. [15] Hide or show flight parameters. Click to hide flight parameters, and click again to show flight parameters. Camera Page--Camera Settings [1] [2] [8] [3] [9] [4] [10 [5] [6] [11 [7] © 2013 DJI Innovations. All Rights Reserved.14 [12 is displayed on the top [1]Capture Mode Single Capture. One picture per shot. Multiple Capture. 3 pictures per shot. Multiple Capture. 5 pictures per shot. Continuous Capture. Also needs to select: a) Intervals between two shots (1~60 seconds) b) Number of shots (2~254, or infinite shots) Note: Capture Button changes accordingly. [2]Photo Format JPEG Raw(one *.jpg and one *.raw will be generate simultaneously per shot when this option is selected) Note: raw photo format is not supported by multiple capture mode or continuous capture mode. [3]Photo Size. Below options are supported. Large: 4608 x 3456, 4:3, 16MP Sub-large: 4384 x 3288, 4:3, 14.4MP Medium: 4384 x 2922, 3:2, 12.8MP Small: 4384 x 2466, 16:9, 10.8MP [4] Video Resolution. Below options are supported. 1920x1080 60i, 16:9 1920x1080 30p, 16:9 1280x960 30p, 4:3 1280x720 60p, 16:9 1280x720 30p, 16:9 640x480 30p, 4:3 (VGA) [5] ISO. Below options are supported. AUTO 100 200 400 800 © 2013 DJI Innovations. All Rights Reserved.15 [6] White Balance. Below options are supported. AWB (auto) Sunny Cloudy Indoor [7]Exposure Metering. Below options are supported. Center Average Spot [8] Exposure Compensation. Below options are supported. -2.0 2.0 -1.7 1.7 -1.3 1.3 -1.0 1.0 -0.7 0.7 -0.3 0.3 [9] Sharpness. Below options are supported. Standard Hard Soft [10] Contrast. Below options are supported. Standard Hard Soft [11] Anti-flicker. Below options are supported. Auto 50Hz © 2013 DJI Innovations. All Rights Reserved.16 60Hz [12]Restore Default Settings Note: 1) Reboot is needed to make it take effect. 2) Restore default settings are recommended after each firmware upgrade. [13]Format SD Card Note: all data in the SD card will be lost after format operation, so be sure to do data backup before doing it. Album Page—Album inCamera SD Card [6] [1] [2] [3] [4] [5] [1]In Camera SD CardAlbum You can browse all photos and videos in the SD card, view a selected picture or play a selected video. [2]Photos and Videos are listed and grouped by date. [3]All those photos and videos that had been synchronized to the mobile device are identified [4] Video thumbnails, with a recorder token and time duration on them. Click a video thumbnail to play a single video.A play progress bar appears at the bottom of the screen. [5]Photo thumbnails that hasn’t been synchronized to the mobile device.Click a Photo thumbnail to view a © 2013 DJI Innovations. All Rights Reserved.17 single picture. You can slip left or right to view the previous or next picture. [6]Synchronize Button . Click this button to enter synchronize mode. (3) (1) (2) In Synchronize Mode (1) A synchronization progress bar (1) appears in this mode with a “tick” on the right. (2) You can select photos or videos and then click (3) You can exit synchronize mode by a click on (4) You can synchronize single picture or video, or synchronize and pay a video at the same time. , the synchronization process then begins. button (3). Synchronize a picture Synchronize and pay a video You can also synchronize multiple pictures or videos at a time. (1) (2) (3) (2) (1) (4) Click thumbnails to select photos or videos to synchronize to your mobile device. The thumbnails identified by this to ken are successfully selected. © 2013 DJI Innovations. All Rights Reserved.18 (2) (2) Or you can select one or more groups to be synchronized. (3) The number of photos and videos that have been selected is displayed here. (4) Synchronizing… You can click to stop the synchronization process. Those photos and videos that have been copy to your iPhone in this synchronization process will remain there as a result. Album Page—Album In mobile device [2] [3] [1] [5] [4] (2) [1]Album In mobile device (2) You can browse all photos and videos in the album created by the App on your mobile device, view a selected picture or play a selected video. [2]Sorted by capture time [3]Sorted by places .Pictures and videos are listed in thumbnail style .GPS information is embedded into the pictures and videos. Note: Accessibility to the Internet is necessary for it to refresh the map. [4] Click any picture to view a single picture. You can slip left or right to view the previous or next picture. [5] Click any video to play a single video. A play progress bar appears at the bottom of the screen. [6] (2) [6] Share your pictures and videos to social network sites. Note1: Accessibility to the Internet is necessary to share pictures or videos. © 2013 DJI Innovations. All Rights Reserved.19 Note2: video sharing is not available currently, but it will be ready in the near future, including youtube, vimeo. News Page [1]News List (1) Scroll up to update (2) Scroll down to load more Note: need connection to the Internet. [2]News Detail Click any item of news list to get news detail. [1] [2] (2) (2) Settings Page Turn the switch from left to right to enable it. [7] [8] [9] [10 [1] [2] [11 [3] [4] [12 [5] [6] [13 [1]Toolbar Auto Hide. Turn the switch from left to right to enable it. [14 (2) [15 © 2013 DJI Innovations. All Rights Reserved.20 Auto HideDisabledAuto Hide Enabled [2]Use GPS Data.Turn the switch from left to right to enable it. When this option is enabled, your mobile device will send its own GPS information, if it has, to the camera upon its connection establishment to the camera. So the camera can have an initial GPS information in case the PHANTOM GPS module could not find enough satellites (>6). This initial GPS information may be overridden by the GPS information got from the PHANTOM GPS module by the camera afterwards. [3]When connection breaks. Click this item to enter the detailed page. (1) (2) (1) If enabled, the camera stops recording when the connection between your iPhone and the camera breaks while the camera is in recording state. If disabled, the camera keeps recording when the connection between your iPhone and the camera breaks while the camera is in recording state. (2) Here you can select what the camera to do when the connection between your mobile device and the camera breaks while the camera is in idle state. This is for those cases that the connection is lost but you don’t want to miss the scenes that should have been taken by this flight. [4]Camera Settings Display. Click this item to enter the detailed page. These options determine which camera parameters will be shown in the camera parameter list in the camera preview page. For example, here disable the Photo Format item, and then it is hidden. © 2013 DJI Innovations. All Rights Reserved.21 [5]Preview Quality. Click this item to enter the detailed page. (1) (2) (1) High: 320x240@30fps (2) Low: 320x240@15fps, recommend to be used under weak Wi-Fi signal condition. Note: may add an option of 640x480@30fps in the future. [11]Binding [12] Find MY PHANTOM Fig.1:Satellite mode Fig.2:Standard mode Appendix Assistant software& MC/PMU Firmware Upgrade Before upgrade, make sure your computer is connected to the Internet and close anti-virus software and firewall during the firmware upgrade.Please follow belowsteps to update software and firmware. 1. Open your PC, power on PHANTOM VISION and connect it to PC with USB extender.DO NOT break connections until firmware upgrade is finished. 2. Run the Assistant software and confirm MC is connected. © 2013 DJI Innovations. All Rights Reserved.22 3. Click “Info” to view your current software version, if there has updates you can down and install. 4. Click “Upgrade” to view your current firmware version, if there has updates you can down and install. 5. Wait until the Assistant software shows “finished” and power cycle. Up to date OK. Note: If firmware upgrade failed, the system will enter waiting for firmware upgrade status automatically, please try again with above steps. Autopilot System LED Description System Status LED Flashing System start and self-check IMU abnormal data or need advanced calibration* Warm up after power on The aircraft is moved or bias of sensors too big Compass error too big, need recalibration. Transmitter (TX) signal lost, enter the FailSaf e. TX stick(s) mid point error too big Low voltage alert or other abnormal alert* (e.g. Configuration error, TX data error, En able low voltage protection without PMU, S N error or Compass abnormal work.) Record forward direction or home point Manual Mode**: None ATTI. Mode: Control Mode Indictor GPS Mode: IOC Mode**: ( stick(s) not at center ( stick(s) not at center ( stick(s) not at center GPS Signal is Best(GPS Satellite number > 6): GPS Signal State Indicator GPS Signal is Well(GPS Satellite number = 6): (GPS/Compass Module is necessary) GPS Signal is Bad (GPS Satellite number = 5) : None GPS Signal is Worst (GPS Satellite number < 5): *You can figure out the error by connecting the autopilot system to the Assistant Software. **Should be enabled on the Assistant Software. Specification General Features © 2013 DJI Innovations. All Rights Reserved.23 Aircraft and camera integration, less weight, multi-functions Camera remote-controlled by DJI VISION app on mobile device WIFI communicating distance enlarged to 300m by Range Extender Built-in anti-vibration gimbal High safety by Low-voltage alert and forcing landing Auxiliary GPS locating for disappearing aircraft Electrical & Mechanical Working Voltage Range(Aircraft with camera) Power Consumption(Aircraft with camera) Operating Temperature Aircraft(With gimbal & camera) : Weight Transmitter iOS Equipment Mounting Range Extender Aircraft(Flight parameters can be effected by mechanical performance and payloads) Supported Battery 4400mAh Lipo Battery Flying Load <1200g Hovering Accuracy (GPS Mode) Vertical:± 0.8m;Horizontal:± 2.5m Max Yaw Angular Velocity 200°/s Max Tilt Angle 35° Max Ascent / Descent Speed ±6m/s Max Flying Speed 10m/s wheelbase 350mm Tilting Range of Gimbal 0°-60° Transmitter Operating Frequency 5.725GHz ---5.850GHz ISM Channel Numbers Communication Distance(open outside) 300m Receiver Sensitivity(1%PER) >-93dBm Transmitting Power <11dBm Working Current/Voltage 60 mA@6V © 2013 DJI Innovations. All Rights Reserved.24 Battery 4 AA Batteries(5#) Camera Operating Temperature 0°C~40°C Resolution 14 Mega Pixels FOV 140 °/ 120° / 90 ° Sensor size 1/2.3’ Functions Remote-controlled and parameter set by mobile device Support multi-capture, continuous capture and timed capture Recording supports HD,1080p30,1080i60 Single capture supports RAW and JPEG Range Extender Operating Frequency 2412-2462MHz Operating Temperature 0°C~40°C Communication Distance(open outside) 200m Transmitting Power <=17dBm Power Consumption 1.5W DJI VISION App mobile device Supported iOS 6.0 vision or above(iPhone recommended) Functions Camera parameters setting FOV scene real-time display Remote-control aircraft and camera Auxiliary GPS locating Warning This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) t his device may not cause harmful interference, and (2) this device must accept any interference received, includi ng interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’ authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, purs uant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfu l interference in a residential installation. This equipment generates uses and can radiate radio frequency en ergy and, if not installed and used in accordance with the instructions, may cause harmful interference to ra © 2013 DJI Innovations. All Rights Reserved.25 dio communications. However, there is no guarantee that interference will not occur in a particular installati on. If this equipment does cause harmful interference to radio or television reception, which can be determ ined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help The maximum temperature for the product operating is 40 ℃. When using the device, ensure that the antenna of the device is at least 20cm away from all persons. Hereby, SZ DJI TECHNOLOGY Corporation declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. © 2013 DJI Innovations. All Rights Reserved.26
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 26 Language : zh-CN Tagged PDF : Yes Author : dji Creator : Microsoft® Office Word 2007 Create Date : 2013:08:29 15:53:57+08:00 Modify Date : 2013:08:29 15:53:57+08:00 Producer : Microsoft® Office Word 2007EXIF Metadata provided by EXIF.tools