SZ DJI TECHNOLOGY GL6581502 C1 User Manual Part One

Download:
Mirror Download [FCC.gov]
Document ID	2535093
Application ID	DmVixMgbEv/jq4prJi5c4g==
Document Description	Users Manual Part One
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	106.72kB (1333952 bits)
Date Submitted	2015-02-14 00:00:00
Date Available	2015-07-31 00:00:00
Creation Date	2015-02-13 16:44:08
Producing Software	PDF Editor 2.2 - Foxit Software
Document Lastmod	2015-02-13 16:44:08
Document Title	Users Manual Part One
Document Author:	elena

User Manual
Compliance Information
KCC Warning Message
“해당무선설비는 운용 중 전파혼신 가능성이 있으므로 인명안전과 관련된
서비스는 할 수 없습니다.”
“해당 무선설비는 운용 중 전파혼신 가능성이 있음”
In the Box
Check that all of the following items have been included in your package before use. If anything is missing, please contact your local dealer.
Index
Name
Picture
Qty.
DJI Inspire 1
Propeller
C1
Camera with gimbal
Smart Battery
Battery Charger
Introduction
DJI Inspire 1 package includes aircraft, C1, gimbal, camera and DJI App. Flight control system is inside
the aircraft, the built‐in camera has been integrated with gimbal. C1 and DJI App are used to control the
aircraft, gimbal and camera. The HD video downlink and receiver have been integrated in the aircraft,
which is used for HD video transmitter and control the aircraft.
Features:
‐Equipped with retractable landing gear, and unobstructed 360 degree view from the camera is made
possible by simply moving the landing gear out of sight. The maximum flight height of DJI Inspire 1 is
**, the maximum distance is **. DJI Inspire 1 has a battery capacity of 6S, 4500mAh. When the battery is
fully charged, it has a maximum run time of **.
‐ The camera is using a 21mm bugeye lens, which has low optical distortion and high resolution. Video
output can be achieved at HD 4Kp30@60Mbps and it supports many kinds of filters. A high
performance gimbal enables to obtain stable images even when the aircraft is fling in high speed.
－Integrated the advanced flight controller of DJI, the DJI Inspire 1 has stable performance during flight.
It can automatically fly back when the C1 signal was missed. The hover assistant enable the DJI Inspire 1
to hover stable without GPS.
‐ The HD video downlink has been integrated inside the aircraft, which is used with DJI App to display
real time HD aerial image, aircraft data and camera data on the mobile device. In addition, it provides
ground station function which allows users to plan the flight mission and enables aircraft to flight
automatically.
Flight safety
In GPS mode, the aircraft can be positioned accurately and hover stably, and the return home function is
available. (Orientation of aircraft is under control but it could not avoid obstructer automatically).
Hover assistant makes aircraft hover stable without GPS (hover assistant can work properly below
height of 5m, and the floor surface have pattern variations in good light conditions).
Aircraft
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
GL658A
[1] Antenna
[2] Mounting
Po
osition
[3] Stick
[4] Neck
Strap Attachment
[5] RTH
Button
[6] Transformati
ion Switch
[7] Battery
Leveel LEDs
[8] Status
LED
[9] Power
Button
[10] Camera Setttings Dial
[11] Playback Bu
utton
Built‐in GPS
Propellerr
Motor
ED
Front LE
Landing gear
Frame arrm
Gimbal
DJI Smarrt Battery
Micro‐US
SB Port
Rear LED
Camera Micro‐USB
Port
Camera Micro‐SD
Card
Port
Hover asssistant camera
[12] Shutter Button
[13] Flight Mode Switch
[14] Video Recording Button
[15] Gimbal Dial
[16] HDMI Port
[17] Upgrade Port
[18] CAN Port
[19] USB Port
[20] Handle Bar
[21] Reserved Button
[22] Power Source Port
[23] Reserved Button
Start
1. Watch the tutorial video
Scan the QR code or click the link shown below to watch the tutorial video.
Tutorial video
http://www.dji.com/Inspire1/training
2. Download DJI App
Search ʺDJI” on the App Store then follow instructions for iOS version.
Search ʺDJIʺ on Google Play then follow instructions for Android version.
Register your e‐mail address when using the app for the very first time.
App Store
Google Play
3. Ensure the smart battery\C1 and the mobile device are fully charged. Please charge the device if it
has low battery level.
Important: Please watch the tutorial and read the quick start guide fully before using your DJI Inspire 1.
* For the best experience, install and use the DJI App on tablet.
** See Appendix for checking battery levels. Refer to user manual for charging。
DJI App
There are four page of GUI: Camera, ground station, tool box and user center.
[1] Present flight mode
[2] GPS signal status
[3] Aircraft status
[4] RC settings
[5] HD video downlink settings
[6] Smart battery information
[7] General settings
[8] Photo format
[9] Video format/Recording time
[10] Shutter/Record switch
[11] Shutter/Record
[12] Play back
[13] Camera settings
[14] Ground station
[15] Aircraft orientation/Height/Distance
[16] Home point settings
[17] Return home
[18] Gimbal mode
[19] Take off
Camera GUI: For display the real time HD images and aircraft data, enable shutter and video recording.
Ground Station: For display the map for setting flight mission.
User Center: photograph and video synchronization, flight record, DJI Shop and account information.
Preparing DJI Inspire 1
1. Mounting the Gimbal
Step 1：Remove the Gimbal Cover and the Gimbal Clamp from the gimbal.
Step 2：Turn the Gimbal Lock to the right (when you are facing the nose of the DJI Inspire 1) until it
locks in place and you hear a clicking sound. Refer to the picture below for details:
Step 3: Insert the gimbal into the Gimbal Lock. Ensure the white mark on the gimbal is aligned with
the white mark on the left of the Gimbal Lock. Refer to the picture below for details:
Step 4: With the gimbal in place, turn the Gimbal Lock to the left (when you are facing the nose of
the DJI Inspire 1) until it locks in the position shown in the below. Now the gimbal is
secured:
2. Attaching the Propellers
Screw the propellers, clockwise for grey nuts and anti‐clockwise for black nuts, onto the four motors. Be
sure to match the black propeller nuts with the black dot motors.
Important：Make sure your smart flight battery and Micro‐SD care are inserted correctly.
3. Description of Aircraft Port
（See the location on P）
Micro‐USB Port: For connecting aircraft and PC Assistant to upgrade firmware.
Camera Micro‐ USB Port: For connecting aircraft and PC to output the data to PC.
Camera Micro‐SD Card Port: For placing the SD card.
4. Powering On Smart Flight Battery
Press the circular power button once, then press again and hold for 2 seconds to power on the smart
flight battery. (Repeat the above steps to power off the smart battery.)
* Press circular power button once to check battery level.
Preparing C1
1. Switch the flight mode switch to GPS mode, ensure the transformation switch is on the lower
position.
The return home function would be unavailable when fly in non‐GPS mode, and the aircraft only
can maintain attitude and would be drift；The camera may be damaged if the transformation switch
was not on the lower position before flight。
2. Description of C1 button and port
Shutter Button：Press to take a photo. If burst mode is activated, multiple photos will
be taken with a single press.
Camera Settings Dial: Turn the dial to quickly adjust camera settings such as ISO,
shutter speed, and aperture without letting go of the C1. Move the dial button to left or
right to select your preferred settings.
Playback Button: Press to view the images or videos that have already been captured.
Recording Button: Press once to start recording video, then press again to stop recording.
Flight Mode Switch: Toggle the switch to select the desired flight mode. You may choose
between; GPS mode, OPTI mode and ATTI mode.
Position 1：GPS mode
Position 2：OPTI mode
Position 3：ATTI mode
Transformation Switch: This switch has two positions. The effect of toggling the switch to
any of these four positions is defined below:
1) Raise, 2) Lower.
1）Raise: Raise the landing gear to its upper most position.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 10
Producer                        : PDF Editor 2.2 - Foxit Software
Author                          : elena
Create Date                     : 2015:02:13 16:44:08
Modify Date                     : 2015:02:13 16:44:08

EXIF Metadata provided by EXIF.tools