SZ DJI TECHNOLOGY HG8001606 Focus Expansion Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3049567
Application ID	7/vwhWhgPg6CvxwHwId3Cg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	62.38kB (779729 bits)
Date Submitted	2016-07-04 00:00:00
Date Available	2016-12-30 00:00:00
Creation Date	2016-06-24 10:42:41
Producing Software	Microsoft® Word 2013
Document Lastmod	2016-06-24 10:42:41
Document Title	Users Manual
Document Creator	Microsoft® Word 2013
Document Author:	Lizhen.Yan(颜丽珍)

DJI Focus Expansion Module User Guide
V1.0 2016.06
Disclaimer and Warning
Congratulations on purchasing your new DJITM product. The information in this document affects your
safety and your legal rights and responsibilities. Read this entire document carefully to ensure proper
configuration before use. Failure to read and follow instructions and warnings in this document may result
in serious injury to yourself or others, or damage to your DJI product or damage to other objects in the
vicinity. This User Manual and all other collateral documents are subject to change at the sole discretion
of DJI. For up-to-date product information, visit http://www.dji.com and click on the product page for
this product.
By using this product, you hereby signify that you have read this disclaimer and warning carefully and
that you understand and agree to abide by the terms and conditions herein. You agree that you are solely
responsible for your own conduct while using this product, and for any consequences thereof. You agree
to use this product only for purposes that are proper and in accordance with all applicable laws, rules,
and regulations, and all terms, precautions, practices, policies and guidelines DJI has made and may make
available.
DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from
the use of this product. The user shall observe safe and lawful practices including, but not limited to,
those set forth in this User Manual.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its affiliated companies.
Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of
their respective owner companies.
In the Box
Expansion Module x1
Power and Communication Cable x1
Introduction
The DJI Focus Expansion Module is used to extend the communication distance of the DJI Focus. It
is compatible with the Matrice 600 when used with the Ronin-MX or Zenmuse X5/X5R. The DJI
Focus Expansion Module can also be used to wirelessly control the Inspire 1 Pro/RAW camera’s
aperture and focus from 3.1 miles (5 km) away.
1.
2.
3.
4.
5.
6.
7.
Antenna
DJI Focus Remote Controller Power Button
Link Button
DJI Focus Expansion Module Power Switch
Communication Port
Lock Knob
Status LED
Usage
1. Remove the original antenna from the DJI Focus Remote Controller.
Do not use the original antenna on the DJI Focus Remote Controller. Instead, use
the 5.8 GHz antenna provided with the DJI Focus Expansion Module.
2. Attach the Expansion Module to the DJI Focus Remote Controller as shown, then tighten the
lock knob to secure the Expansion Module.
3. When used with the Ronin-MX, connect the Communication Port on the Motor to the LB Port
and the P-TAP Port by using the provided Power and Communication Cable.
4. Press and hold the power button on the top of the Expansion Module to power on the DJI
Focus Remote Controller, and toggle the power switch up to power on the Expansion
Module.
Linking
The DJI Focus Expansion Module must be linked to the master remote controller of the Matrice
600 or Inspire 1 Pro/RAW in order to work.
How to Link
1. Power on the remote controller for the Matrice 600 or Inspire 1 Pro/RAW, and press the C1,
C2 and video recording buttons simultaneously. Release the three buttons when you hear a
beeping pattern consisting of 1 long beep followed by 2 short beeps, and then press the shutter
button once. The remote controller is ready to link when it starts to beep rapidly.
2. Power on the DJI Focus Expansion Module, then (a) press the link button once, or (b) on the
DJI Focus Remote Controller, go to Menu > Setting > Connect RC > Connect to begin linking.
3. The linking process is successful when the status indicator turns solid yellow or solid green.
Status LED Description
Status LED
Solid red
Blinks red
Solid yellow
Description
Loader Mode
The device is not linked.
The device is linked but not connected to the
motor or camera.
Successfully linked and working normally
Solid green
Specifications
Operating
Frequency
Transmission
Distance
5.725-5.825 GHz
50 m（the distance between the Expansion Module and the Master
Remote Controller of the Matrice 600 or Inspire 1 Pro/RAW,
unobstructed, free of interference）
Transmitter Power 13 dBm
(EIRP)
Operating
Temperature Range -20 to 55℃
Operating Voltage
100 mA@3.7 V
FCC Compliance Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits,
human proximity to the antenna shall not be less than 20cm during normal operation.
IC RSS Warning
This device complies with Industry Canada licence-exempt RSS standard (s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference,including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
IC Radiation Exposure Statement:
This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm between the
radiator& your body.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device is in
compliance with the essential requirements and other relevant provisions of the R&TTE Directive.
A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance
EU contact address: DJI GmbH, Industrie Strasse. 12, 97618, Niederlauer, Germany

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 7
Language                        : zh-CN
Tagged PDF                      : Yes
Author                          : Lizhen.Yan(颜丽珍)
Creator                         : Microsoft® Word 2013
Create Date                     : 2016:06:24 10:42:41+08:00
Modify Date                     : 2016:06:24 10:42:41+08:00
Producer                        : Microsoft® Word 2013

EXIF Metadata provided by EXIF.tools