SZZT ELECTRONICS KS8223 Smart wireless pos User Manual

SZZT ELECTRONICS CO.,LTD Smart wireless pos

a href="https://usermanual.wiki/SZZT-ELECTRONICS" itemprop="url"> SZZT ELECTRONICS >

User Manual

Magneticstripe itselfWarranty: technology the industry.CopyrightThis User Guide is issues by SZZT Electronics Co Ltd. SZZT enjoys  exclusive  rights  reserved  according  to  the  copyright law. Without the prior consent of the copyright owner, anyone can not engage in copying, additions and deletions, excerpts, copying or imitation of part of the this manual or all.The contents of this User Guide are only used to describe the use  of  the  products  manufactured  by  SZZT.  About  the contents  of  this  guide,  SZZT  Electronics  Co  Ltd  works without any express or implied warranties or guarantee liabili -ty.WarningFor any problem or damage caused the accessories which is not provide by SZZT or approved by SZZT. SZZT will  not take  any  responsibility. Anyone  has  no  right  to  modify  or change the product without the consent of the SZZT Electron -ics Co Ltd.Due  to  the  update  of  products,  some  of  the  details  of  this document may be inconsistent to the product, please in kind prevail. SZZT Electronics Co Ltd keep the interpretation right of this document and reserves the right to amend this specifi-cation without prior notice.General troubleshooting guidelines:The following faults  are  common  faults. For the rest  of  the failure, please refer to the company after-sales service content in order to obtain quality service.1. Blank displayCheck whether the power cable is connected to the AC output port on the POS or not.Check whether the power adapter's output port is connected to the POS or not.2. Printer does not work:Check whether the printing paper box is closed or not.Check  whether  using  the  appropriate  printing  paper  and  is correctly loaded. Make sure to use the appropriate paper and install it correctly on the printer.3. Magnetic low reading rateCheck whether the magnetic card has been polluted by dirt or other pollutants. If so, please replace to a new one.Please use cleaning card to clean the POS's magnetic header.4. Unable to read IC card Check whether the IC card is inserted fully into card slots in the right direction or not.Check whether there is any dirt or other pollutants on surface of the metal contact point of IC card. If so, please use cleaning card to clean the contact point. 5. The network connection failedCheck the network is connected successfully or not.Check whether the network configuration meets the installa-tion requirements or not.6. GPRS communication failed.Check whether the SIM card is installed correctly or not. Check whether the SIM card has activated the GPRS service or not. Unpacking checkOpen the packing to check the POS and accessories as shown in below. For the actual packing content, please refer to the packing list.PrecautionsSafety warning1.  Please  insert  the AC  power  plug  into  the  corresponding outlet on the power adapter.2.  Do  not  use  the  terminal  in  any  potentially  explosives environment.3. Non-professional and technical personal do not dismantle the terminal's power adapter.4.  Changing  the  battery  with  wrong  model  may  leads  to explosion.Safety instructions1. Avoid installing or using the terminal during thunder and lightning  environment,  otherwise  user  may  be  in  danger  of lightning strikers.2. Avoiding using the terminal if found any abnormal smell, overheat  or  smoke,  please  shut-down  and  power-off  the terminal immediately.Usage specifications1. During the installation and operation of the terminal, please make  sure  only  using  the  standard  approved  power  socket with  stable  voltage,  avoiding  sharing  the  circuit  with frequently starting and electricity frequently changing equip-ments.2. Avoiding any liquid or objects sprinkled into the terminal. if so, please shut-down the terminal immediately, cut-off the power,  unload  the  battery,  dry  the  liquid  and  remove  the objects.3. Avoiding hard pressing, vibration, shaking and knocking on the terminal.4. Operate the terminal in a dry, ventilated and clean environ-ment, avoiding direct sunlight, keeping the working tempera-ture at 5-35 centigrade and working humidity at 20%-80%.5. Maintain  the terminal regularly, including: function  tests, whole  terminal  external  cleaning,  printer  and  keypad cleaning.6. Using the proper printing paper for the terminal.7.  When  there's  problem  persists  after  you  have  followed troubleshooting  guidelines,  please  contact  with  SZZT  for after-sales support and further information. do not open and maintain the POS by yourself.8.  When  there's  a  safety  problem,  for  example  abnormal smell, abnormal noise, electric leakage, etc. please power-off the terminal immediately and report to the terminal manage-ment department to solve the problems.SZZT is not responsible for any operation and behaviors shown as below:The operating system only supports official upgrades, if the user installs unofficial system, the risks and losses resulted in security will be borne by the user (There may be risks: user information  is  stolen,  automatically  send  text  messages, locate your location, etc.)Terminal  damaged  by  improper  operation  and  maintenance which did not comply with the user guide's requirements. Product packing list1. 1 Mainframe  2. 1 Power adapter3. 1 Battery4. 1 User guide5. 1 Micro USB Cable6. 1 Thermal printer7. Others1. As  shown  below,  please  pull  up  the  printing  paper  box's cover to open it.2. Load the printing paper roll into the printing paper box in the  right  direction  as  shown  below  and  leave  some  blank paper at the cutter.3. Close the printing paper box's cover.4. Pull out the printing paper a little bit along with the cutter and cut the waste paper by using the cutter.Note:  please  make  sure  to  load  the  printing paper in correct direction. otherwise it will lead to printing failed.Correct paper loading direction  Wrong paper loading directionWhen using the POS for the first time, you may need to install PSAM card,  SIM  card or TF  card.  please  follow  the below instructions to operate:place the POS on a soft and clean surface to prevent scratch-ing. Startup:  press  the  power  button  until  LCD  displays  logo, then the POS is ready.Shut  down:  Press  power  button  until  LCD  displays  three modes: Shutdown, Restart, Flight mode, select "Shutdown" to shutdown POS2.  According  to  the  illustra-tion to insert SIM and PSAM card.This  product?s  toxic  and  hazardous  substances name and content of the tableThe  products  that  exceed  the  service  life  of  environmental protection shall  be  reclaimed according to the provisions  of the  Administrative  Measures  on  the  Control  of  Electronic Information Products and shall not be discarded at willO:  means  that  the  toxic  and  hazardous  substances  in  the  parts  of  all  homogeneous materials in the content of SJ/T11363-2006 specified in the limited requirements below.X:  means  the  toxic  and  hazardous  substances  at  least  in  the  part  of  a  homogeneous material in the content of more than SJ/T11363-2006 limit requirements. However, the content  is  beyond  (by  搙"  mark)  components  because  there  is  no  mature  Instead  of Warranty: 1. SZZT will provide you with quality after-sales service. 2.  If  the  damage  caused  by  human  factors,  SZZT will  take repair maintenance costs. 3. Please keep  this  card,  the company will be  based  on  this warranty.Contact information:Headquarters: SZZT Industrial  Park,  NO.3 Tongguan  Road, Guangming New District, Shenzhen, Guangdong, China. Zip code: 518132Customer Service Hotline: +86- 400 8810 888Fax: +86-755-26490099Website: www.szzt.com.cn SZZT Electronics Co., Ltd. reserves the right to interpret the warranty card.Connect  the  output  port  of  the  power  adapter  to  the  POS power  connector  location.  Please  use  the  dedicated  serial cable to connectMagnetic card reader is on the right  side  of  the  POS,  please swipe  the  magnetic  card  in  a steady speed and the magnetic side should be facing the LCD.IC Card  Reader is at bottom of the  POS,  please  insert  the  IC card into the card slot fully and the  chip  side  should  be  facing up. 3. Load the battery and close the cover.Note: please  make  sure the missing  angel  on card is in the right direction responding to the missing angel on card slot.Note:  the  magnetic  reader  and  the  IC  card reader  is  easily  stained  with  dirt  after  use  the POS  for  a  long  time,  please  use  the  cleaning magnetic  card  or  IC  card  to  clean  the  dirt  on time.Interface connectionCard reader operation instructionsProduct Warranty CardProduct CertificationLoading printing paper rollSIM card /Battery/ PSAM card installation instructionName of parts1. Open the battery cover.Toxic and Hazardous Materials or ElementsCircuit  board componentsHead assemblyEquipment  Power adapter BatteryPrinting paper USB cable User guideInspectorcontactless card readerindicator lighttouch monitorIC card readercover of printercameracameramagnetic card readerSIM cardPSAM cardTF cardpower portpower buttonvolume buttonSZZT Electronics CO., LTDSZZT Industrial Park, NO.3 Tongguan Road, Guangming New District, Shenzhen, Guangdong, China.  Post Code:518132Contact Number:+86-(0)755-81728888Email:marketing@szzt.com.cnWebsite:Http://www.szzt.com.cnKS8223 User GuideVersion:V1.0Product descriptionStart up/shut down:Product nameğSmart POS TerminalProduct model: KS8223KS8223 User GuideStatement
FCC RF Exposure Information and Statement  This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue for body, and 4 W/kg averaged over ten gram of human's hands. Device types: Smart wireless pos (FCC ID: 2AL7RKS8223) has also been tested against this SAR limit. SAR information on this and other pad can be viewed on‐line at  http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested simulation typical 5mm for body and 0 mm to hands. To maintain compliance with FCC RF exposure requirements, use accessories should maintain a separation distance between the user's bodies mentioned above, the use of belt clips, holsters and similar accessories should not contain metallic components in its assembly, the use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.  FCC Warning  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.  NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Download:
Mirror Download [FCC.gov]
Document ID3432144
Application IDzu2NARIWhAwXqbdj9oVNLA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize78.58kB (982269 bits)
Date Submitted2017-06-20 00:00:00
Date Available2017-06-20 00:00:00
Creation Date2017-03-17 15:43:56
Producing SoftwareCorel PDF Engine Version 16.1.0.843
Document Lastmod2017-06-15 11:08:56
Document TitleKS8223用户指南英文版 印制201703173.cdr
Document CreatorCorelDRAW X6
Document Author: Space
FCC ID Filing: 2AL7RKS8223

Navigation menu