SafeMark Systems LP SAFEMARK51D 3160317MHz WIRELESS DEVICE User Manual

SafeMark Systems LP 3160317MHz WIRELESS DEVICE

USERS MANUAL

SAFEMARK SYSTEMS LP SAFE FCC ID: TZ2SAFEMARK51D Shenzhen Most Electronic Co., Ltd. Report No. MT-E0511456 USER’S MANUAL ◆TO PROGRAM SAFE 1. “*”+ “*” + 1113 + “*+ 6 2. Enter four digits of serial number + “#” 3. Enter first master code + “#” 4. Enter second master code + “#” 5. Enter four digits room number + “#” 6. Enter the connecting transmitter number + “#” To set the next safe Repeat step “5” and “6” IMPORRANT: THE FACTORY DEFAULT SETTING OF THESE CODES MUST BE CHANGED FOR EACH HOTEL AT THE TIME OF INIITIAL INSTALLATION TO ENSURE MAXIMUM SECURITY. ◆ TO CLOSE SAFE Press in user’s code (4 digits) Press “#” button to lock safe The door will automatically close NOTE: AFTER DOORCLOSED, THE USER’S CODE WILL BE SHOWN AGAIN TO REMIND USER. ◆ TO OPEN SAFE Press in user’s 4digits code Door will automatically open. ◆ TO SET CLOCK Open safe by either master code or EHO one times Press”*” button twice Enter 807027 + “#” Enter Year (2 digits) + Month (2digits) + Date (Two digits) Press “#” button to change to second window Enter Hour (2digits) + Minutes (2digits) + Second (2digits) Press “#” button to confirm all the setting ◆ TO SET FIRST MASTER CODE Open safe by either master code or EHO one times Press”*” button twice Enter 720708 + “#” Enter the first old master code (factory default setting is 999999) Enter new 6 digits as first master code Press “#” button to confirm all the setting
SAFEMARK SYSTEMS LP SAFE FCC ID: TZ2SAFEMARK51D Shenzhen Most Electronic Co., Ltd. Report No. MT-E0511456 ◆ TO SET SECOND MASTER CODE Open safe by either master code or EHO one times Press”*” button twice Enter 630689 + “#” Enter the second old master code (factory default setting is 888888) Enter new 6 digits as first master code Press “#” button to confirm all the setting FCC NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

Navigation menu