SafeMark Systems LP SAFEMARK51D 3160317MHz WIRELESS DEVICE User Manual
SafeMark Systems LP 3160317MHz WIRELESS DEVICE
USERS MANUAL
SAFEMARK SYSTEMS LP SAFE FCC ID: TZ2SAFEMARK51D
Shenzhen Most Electronic Co., Ltd. Report No. MT-E0511456
USER’S MANUAL
◆TO PROGRAM SAFE
1. “*”+ “*” + 1113 + “*+ 6
2. Enter four digits of serial number + “#”
3. Enter first master code + “#”
4. Enter second master code + “#”
5. Enter four digits room number + “#”
6. Enter the connecting transmitter number + “#”
To set the next safe
Repeat step “5” and “6”
IMPORRANT: THE FACTORY DEFAULT SETTING OF THESE CODES MUST
BE CHANGED FOR EACH HOTEL AT THE TIME OF INIITIAL INSTALLATION
TO ENSURE MAXIMUM SECURITY.
◆ TO CLOSE SAFE
Press in user’s code (4 digits)
Press “#” button to lock safe
The door will automatically close
NOTE: AFTER DOORCLOSED, THE USER’S CODE WILL BE SHOWN AGAIN TO REMIND
USER.
◆ TO OPEN SAFE
Press in user’s 4digits code
Door will automatically open.
◆ TO SET CLOCK
Open safe by either master code or EHO one times
Press”*” button twice
Enter 807027 + “#”
Enter Year (2 digits) + Month (2digits) + Date (Two digits)
Press “#” button to change to second window
Enter Hour (2digits) + Minutes (2digits) + Second (2digits)
Press “#” button to confirm all the setting
◆ TO SET FIRST MASTER CODE
Open safe by either master code or EHO one times
Press”*” button twice
Enter 720708 + “#”
Enter the first old master code (factory default setting is 999999)
Enter new 6 digits as first master code
Press “#” button to confirm all the setting
SAFEMARK SYSTEMS LP SAFE FCC ID: TZ2SAFEMARK51D
Shenzhen Most Electronic Co., Ltd. Report No. MT-E0511456
◆ TO SET SECOND MASTER CODE
Open safe by either master code or EHO one times
Press”*” button twice
Enter 630689 + “#”
Enter the second old master code (factory default setting is 888888)
Enter new 6 digits as first master code
Press “#” button to confirm all the setting
FCC NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED
BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.