Safety Technology 34072 small battery powered sensor for use in a wireless alert system User Manual CERTIFICATE OF COMPLIANCE

Download:
Mirror Download [FCC.gov]
Document ID	1808959
Application ID	cuTb1+QcuGqdtRr1KQy2Zw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.09kB (176174 bits)
Date Submitted	2012-10-05 00:00:00
Date Available	2012-10-08 00:00:00
Creation Date	2012-10-04 16:15:11
Producing Software	Adobe PDF Library 9.0
Document Lastmod	2012-10-04 16:15:41
Document Title	CERTIFICATE OF COMPLIANCE
Document Creator	Acrobat PDFMaker 9.1 for Word
Document Author:	Systems Administrator

Rhein Tech Laboratories, Inc.
360 Herndon Parkway
Suite 1400
Herndon, VA 20170
http://www.rheintech.com
Appendix J:
Manual
Please refer to the following page.
Client: STI
Model: 34072
Standards: FCC 15.231/IC RSS-210
ID’s: TXL34072/6335A-34072
Report #: 2012204
Safety Technology International, Inc.
®
Safety Technology International (Europe) Ltd.
2306 Airport Road • Waterford, Michigan 48327-1209
Phone: 248-673-9898 • Fax: 248-673-1246
Toll Free: 800-888-4784 • E-mail: info@sti-usa.com
Web: www.sti-usa.com
WIRELESS TRANSMITTER BOARD
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999
Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)
E-mail: info@sti-europe.com • Web: www.sti-europe.com
DISCONNECT FROM BATTERY,
PLUG INTO WIRELESS
TRANSMITTER BOARD
SOLDER BLUE N.C. WIRE
ONTO CENTER POST OF
MICRO SWITCH
WIRELESS BOARD HOLDER
CONNECT TO BATTERY
WIRELESS OPERATION:
The STI WIRELESS RETRO PCB will send a wireless signal to an STI 433MHz 4-Channel Receiver or 8-Channel
Receiver. The STI WIRELESS RETRO PCB sends an alert signal when the “NC” device status changes to open. It
sends a restore-to-normal signal when the switch is closed.
NOTE: To enroll the wireless device signal into the receiver, please see the receiver installation instructions.
STANDARD STI-6200 INSTALLATION:
1. Insert wireless board holder onto pegs.
2. Insert wireless transmitter board with 9 Volt connector facing inward.
3. Solder blue NC wire onto center post of micro switch.
4. Disconnect 9 Volt battery, connect onto wireless transmitter board.
5. Connect 9 Volt connector wires coming off of transmitter board to 9 Volt battery.
IMPORTANT NOTICE:
Changes or modifications not expressly approved by the manufacturer could void the user’s authority to
operate this equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference that may be received, including interference that may cause
undesired operation.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de
brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
INSTALLATION OF STI-34072 STI Wireless Conversion Board for STI-6200 SERIES Extinguisher Stopper®
All specifications and information shown were current as of publication and are subject to change without notice.
34072 OCT 2012

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Systems Administrator
Create Date                     : 2012:10:04 16:15:11-07:00
Modify Date                     : 2012:10:04 16:15:41-07:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2012:10:04 16:15:41-07:00
Creator Tool                    : Acrobat PDFMaker 9.1 for Word
Format                          : application/pdf
Title                           : CERTIFICATE OF COMPLIANCE
Creator                         : Systems Administrator
Document ID                     : uuid:a015339e-6b58-4ac3-87ee-0314f32ae681
Instance ID                     : uuid:88fb1cb6-1125-49e3-8cec-b672b89762ca
Producer                        : Adobe PDF Library 9.0
Page Count                      : 2

EXIF Metadata provided by EXIF.tools