Sagem Wireless 95A03A GSM Dual Band 850/1900 MHz Mobile Phone User Manual myX 1a twin PCS en 00 pmd

Sagem Wireless GSM Dual Band 850/1900 MHz Mobile Phone myX 1a twin PCS en 00 pmd

Users Manual

1You have just bought a mobile phone and wecongratulate you on your choice.Your phone will allow you to use different internationalnetworks (GSM 850 MHz and PCS 1900 MHz)depending on the roaming agreements between theoperators.We would like to remind you that this phone isapproved to European standards.To get the most out of using your phone, werecommend that you read this manual carefully andkeep it handy for future reference if needed.WARNINGAccording to the configuration of the networks andassociated subscriptions, certain functions may not beavailable (usually indicated by *).Make sure your SIM card is compatible with yourphone. If an incompatible SIM card is inserted, amessage will be displayed when switching on yourphone. For further information, contact your Operator.The SAGEM logo and trademark are the property ofSAGEM SA.AT is a registered trademark of Hayes Microcomputerproducts Inc.Hayes is a registered trademark of Hayes MicrocomputerProducts Inc.T9™ Text Input is a registered trademark of ©TegicCommunications Inc.T9 is licensed under one or more of the following U.S.Patents: 5,818,437, 5,953,541, 5,187,480, 5,945,928,6,011,554 and additional patents are pending worldwide.Compatibility of your SIM cardYour phone is compatible with SIM 3Vcards only.myX-1a twin PCS_en_00.pmd 23/06/2004, 10:501
2 Conformance DocumentSAGEM SA declare under its sole responsibility thatthe product Dual Band GSM/PCS Type A2003conforms to the requirements of the following EECdirectives:EEC Directive 1999/5/CESafety EN 60950: 2000EMC EN 301 489-1EN 301 489-7Low voltagedirective 73/23/CEENetwork 3GPP TS 51.010-1 withGCF-CC v3.12.1 includedTBR 19 Edition 5TBR 20 Edition 3EN 301511 v7.0.1Health EN 50360EN 50361FCC Conformance DocumentFCC Part 24Network NAPRD03 v2.9.1Health Draft IEEE Std P1528/D1.2myX-1a twin PCS_en_00.pmd 23/06/2004, 10:502
3Use of your phone is subject to safety rules designedto protect the user and his or her environment.Exposure to Radio Frequency Signals•Your wireless handheld portable phone is a lowpower radio transmitter and receiver. When it is ON, itreceives and also sends out frequency (RF) signals.•In August, 1996, the Federal CommunicationsCommissions (FCC) adopted RF exposure guidelineswith safety levels for handheld wireless phones.Those guidelines are consistent with the safetystandards previously set by both U.S. andinternational standards bodies:ANSI C95.1 (1992)*NCPR Report 86 (1986)*ICNIRP (1996)*(*) American National Standards Institute; NationalCouncil on Radiation Protection and Measurements;International Commission and Non-Ionizing RadiationProtection.•Those standards were based on comprehensive andperiodic evaluations of the relevant scientificliterature. For example, over 120 scientists,engineers, and physicians from universities,government health agencies, and industry reviewedthe available body of research to develop the ANSIStandard (C95.1).•The design of your phone complies with the FCCguidelines (and those standards).Safety Information for Wireless handled phonesmyX-1a twin PCS_en_00.pmd 23/06/2004, 10:503
4•For body worn operation, this phone has been testedand meets FCC RF exposure guidelines when usedwith an accessory that contains no metal and thatpositions the handset a minimum of 1.5 cm from thebody.Use of other accessories may not ensure compliancewith FCC RF exposure guidelines.Phone Operation•Normal position: hold the phone as you would anyother phone with the upper zone (back of the LCDdisplay) pointed up and over your shoulder.•Tips on efficient operation: for your phone to operatemost efficiently: do not touch cover unnecessarily thetop part of the phone with your hand. This wouldcover the integrated antenna and affect call qualityand may cause the phone to operate at a higherpower level than otherwise needed.Driving•Check the laws and regulations on the use ofwireless telephones in the areas where you drive.Always obey them. Also, if using your phone whiledriving while driving please:- Give full attention of driving, driving safely is yourfirst responsibility- Use hands-free operation, if available- Pull off the road and park before making oranswering a call if driving conditions so require.Safety Information for Wireless handled phonesmyX-1a twin PCS_en_00.pmd 23/06/2004, 10:504
5Electronic Devices•Most modern  electronic equipment is shielded fromRF signals. However, certain electronic equipmentmay not be shielded against the RF signals from yourwireless phone.•Some phone accessories allow to reduce theradiation interferences of the phone. Please contactyour distributor.PacemakersThe Health Industry Manufacturers Associationrecommends that a minimum separation of six (6”)inches be maintained between a handheld wirelessphone and a pacemaker to avoid potential interferencewith the pacemaker. These recommendations areconsistent with the independent research by andrecommendations of Wireless Technology Research.Persons with pacemakers:•Should ALWAYS keep the phone more than sixinches from their pacemaker when the phone isturned ON•Should not carry the phone in the breast pocket•Should use the ear opposite to the pacemaker tominimize the potential for interference•If you have any reason to suspect that interference istaking place, turn your phone OFF immediately.Safety Information for Wireless handled phonesmyX-1a twin PCS_en_00.pmd 23/06/2004, 10:505
6Hearing AidsSome digital wireless phones may interfere with somehearing aids. In the event of such interference, youmay want to consult your service provider.Other Medical DevicesIf you use any other personal medical device, consultthe manufacturer of your device to determine if they areadequately shielded from external RF energy. Yourphysician may be able to assist you in obtaining thisinformation.Turn your phone OFF in health care facilities when anyregulations posted in these areas instruct you to do so.Hospitals or health care facilities may be usingequipment that could be sensitive to sensitive externalRF energy.VehiclesRF signals may affect improperly installed orinadequately shielded electronic systems in motorvehicles. Check with the manufacturer or itsrepresentative regarding your vehicle. You should alsoconsult the manufacturer of any equipment that hasbeen added to your vehicle.Posted FacilitiesTurn your phone OFF in any facility where postednotices so require.Safety Information for Wireless handled phonesmyX-1a twin PCS_en_00.pmd 23/06/2004, 10:506
7AircraftFCC regulations prohibit using your phone while in theair. Switch OFF your phone before boarding an aircraft.Blasting AreasTo avoid any interfering with blasting operations, turnyour phone OFF when in a “blasting area” or in areasposted: “Turn off two-way radio”. Obey all signs andinstructions.Potentially Explosive Atmospheres•Turn your phone OFF when in any area with apotentially explosive atmosphere and obey all signsand instructions. Sparks in such areas could causean explosion or fire resulting in bodily injury or evendeath.•Areas with a potentially explosive atmosphere areoften but not always clearly marked. They includefueling areas such as gasoline stations; below deckon boats, fuel or chemical transfer or storagefacilities; vehicles using liquefied petroleum gas (suchas propane or butane); areas where the air containschemicals or particles, such as grain, dust, or metalpowders; and any other area where you wouldnormally be advised to turn off your vehicle engine.Safety Information for Wireless handled phonesmyX-1a twin PCS_en_00.pmd 23/06/2004, 10:507
8For Vehicles equipped with Air BagAn air bag inflates with great force. DO NOT placeobjects, including both installed or portable wirelessequipment, in the area over the air bag or in the air bagdeployment area. If in-vehicle wireless equipment isimproperly installed and the air bag inflates, seriousinjury could result.Electrical Safety•Only us the appropriate chargers recommended inthe manufacturer’s catalog. Using another chargermay prove dangerous and could invalidate thewarranty of your phone.•The main power socket should be easily accessible.•Make sure that the main voltage corresponds to thelevel marked on the charger identification plate.General Precautions•Do not try to open your phone and repair it yourself.The manufacturer cannot be held liable for anyresulting damage.•Any work done by an unqualified and unauthorizedperson will invalidate your warranty.•Do not use your phone in humid places (bathroom,swimming pool, etc.). Protect it from splashing waterand other liquids.•Do not expose your phone to extreme temperatures.Safety Information for Wireless handled phonesmyX-1a twin PCS_en_00.pmd 23/06/2004, 10:508
9•Keep your phone out of reach of small children. Donot allow them to play with it, it is not a toy.•Only use your phone with original accessories.Failure to comply with these rules will invalidate yourwarranty.•Remember to disconnect the charger beforeremoving the battery.•The physical and chemical processes used inrechargeable batteries mean that temperature limitsmust be followed during rapid charging. Your terminalautomatically protects the batteries from extremetemperatures.•If the phone is disconnected from the battery for anextended period of time, it will lose the time and therecorded voice messages.Emergency CallsIMPORTANT•This phone, like any PCS phone, operates usingradio signals, PCS and landline networks, and user-programmed functions. As a consequence aconnection in all conditions cannot be guaranteed.Therefore you should never rely solely upon any PCSphone for essential communications (e.g. medicalemergencies).•To make or receive any calls, this phone must beswitched on and in service area with adequate PCSsignal strength. Emergency calls may not be possibleon all PCS networks or when certain networkservices and/or phone features are in use. Checkwith local Service Providers.Safety Information for Wireless handled phonesWARNING•The manufacturer cannot be heldliable for any failure to comply with theabove recommendations or for anymisuse.•The software program developed bySAGEM SA remains the exclusiveproperty of SAGEM SA. It is thereforehighly prohibited to modify, translate,decompile or disassemble thissoftware program or any part thereof.•SAGEM SA may not be heldresponsible for the contents ofmessages, software or objectsdownloaded and/or for any direct orindirect consequential damage to thephone itself.myX-1a twin PCS_en_00.pmd 23/06/2004, 10:509
10•When making an emergency call, remember to giveall the necessary  information as accurately aspossible. Remember that your PCS phone may bethe only means of communication at the scene of anaccident - do not terminate the call until givenpermission to do so.•If certain features are in use (such as Keyguard), youmay first need to turn those features off before youcan make an emergency call. Consult this manualand your local PCS Service Provider.Emergency Calling•If  the phone is not on, press  .•Key in emergency number for your present location(e.g. 911 or other official emergency number).•Press  .•If you dial 911   during a call, the phone terminatesthe current call and attempts to make a call to theemergency number 911.FCC/INDUSTRY CANADA NOTICEYour phone may cause TV or radio interference (e.g.when using telephone in close proximity of receivingequipment). The FCC/INDUSTRY Canada can requireyou to stop using your telephone if such interferencecannot be eliminated. If you need assistance, contactyour local dealer.This device complies with parts 15 and 68 of the FCCrules. Operation is subject to the condition that thisdevice does not cause harmful interferences.Safety Information for Wireless handled phonesmyX-1a twin PCS_en_00.pmd 23/06/2004, 10:5010
11Switch onPress  .CallDial the number then press  .AnswerPress  .Hang upPress  .Switch offPress   (long press).Hands-freeTo communicate, press  .Lock and unlock the keyboard from the standbyscreenPress ∗∗∗∗∗ then OK.Redial last numberPress   twice.Make a call from a number stored in the directoryBy name: enter the first letter of the name, press  ,scroll down the list to find your correspondent, thenpress   to call.By location in the directory: enter the location numberthen press ∗∗∗∗∗ to call.Functions at a glancemyX-1a twin PCS_en_00.pmd 23/06/2004, 10:5011
12Menus at a glanceEnter using   or Navigate using  and Validate using OKQuit or return to the previous menu using CAccording to the model of your phone, to theconfiguration of the networks and associatedsubscriptions, certain functions may not beavailable (indicated by *).Depending on the model, the phone menus willappear as listed below:ServicesDirectoryDirectory menuSort by locationCreate recordCall groupsAvailable memoryPersonal numbersQuitText messagesWrite new...Call servicesCall forwardingView last numbersDuration and cost of calls (*)Display numbersDouble callAutomatic redialBlacklistVoice mail numberLocal information (*)Ringing and beepsVolume and choice of musicCall groupsPersonalised ringing tone (*)Vibrate (*)Silent modeBeepsControlsCustomizationSelect languageAutomatic responseNetwork selectionSetting time/dateDisplay contrastCurrency converterSecurity Keyboard lockingPIN numberPIN number 2 (*)Phone codeConfidentiality messagesOperator password (*)Limit incoming calls (*)Limit outgoing calls (*)Pre-set directory (*)Costs (*)AccessoriesCalculatorAlarmTimerCar kit (*)Data parameters (*)GamesmyX-1a twin PCS_en_00.pmd 23/06/2004, 10:5012
13Outgoing call A call made from your phone.Incoming call A call received by your phone.SIM card The card containing your subscription and access rights to services. Thedetachable part is the “micro-SIM”.PIN The personal code linked to your SIM card.PIN2 The second personal code linked to your SIM card to access certainfunctions (*).Phone code The phone code is a secret code intended to protect the phone in case of theft.IMEI The identification number of your phone.SMS or EMS Short Message Service or Extended Message Service: sending and receipt oftext messages, icons, animated screen savers and melodies.Service provider Company which manages the network subscription.or operatorGlossarymyX-1a twin PCS_en_00.pmd 23/06/2004, 10:5013
14ContentsPresentation of the phone ........................... 16Function keys .............................................. 18Alphanumeric keyboard ............................... 18Key 1 ........................................................... 19Key ∗........................................................... 19Display ......................................................... 19Exchanging the front and back panel ........... 20Getting started .............................................. 21Information on the SIM card ......................... 21Installing the SIM card and the battery.......... 22Charging the battery..................................... 23Switching on/switching off, starting up .......... 24Setting Time and Date ................................. 24Searching for a network ............................... 25Switching off ................................................ 26Recommendation ........................................ 26Menu access ............................................... 26Deleting characters ...................................... 26Initial communication - Hands-free mode .. 27Making a call ................................................ 27Receiving a call ........................................... 27Volume control ............................................. 27Hands-free mode (depending on model) ...... 28Ending a call ................................................ 28Directory ....................................................... 29Directory display .......................................... 29Storing a number ......................................... 29Deleting a number ....................................... 30Call groups .................................................. 30Sorting ......................................................... 32Sending a short message to a storednumber ........................................................ 32Directory memory space .............................. 33Displaying personal numbers ....................... 33Making a call with a stored number .............. 33Messages ...................................................... 34Receiving a message .................................. 34Editing a message usingEasy Message T9™ ..................................... 40Options for messages in the list ................... 44Calls............................................................... 45Forwarding calls ........................................... 45Viewing the list of the last numbers used ...... 46Monitoring the duration and costof calls (*) ..................................................... 46Displaying the numbers................................ 47Authorising double call ................................. 48Configuring automatic redial ......................... 48Blacklist ....................................................... 49Voice mail number ....................................... 49Local information distribution ........................ 49Replacing the international prefix ................. 49Placing calls on hold .................................... 50Multi-conferencing (*) ................................... 50Ringing tones ............................................... 52Selecting the volume and the typeof ringing tone .............................................. 52Call groups .................................................. 52Personalising the ringing tone(depending on model) .................................. 53Setting the vibrator (depending on model) .... 54Selecting silent mode (dependingon model) .................................................... 54Setting the beeps ......................................... 54Deleting DTMF tones (dependingon model) .................................................... 55myX-1a twin PCS_en_00.pmd 23/06/2004, 10:5014
15ContentsSettings ......................................................... 56Customizing your phone .............................. 56Selecting the display language ..................... 58Select the type of response .......................... 59Selecting the network ................................... 59Setting the time and date ............................. 60Controlling screen contrast........................... 61Converting currencies .................................. 61Security ......................................................... 62Locking the keyboard ................................... 62Changing the PIN number............................ 62Changing the PIN2 number (*) ..................... 63Changing the phone code ............................ 63Changing the operator password (*) ............. 64Limiting incoming calls (*) ............................ 64Limiting outgoing calls (*) ............................. 65Setting up the pre-set directory (*) ................ 65Charge checking (*) ..................................... 66Confidentiality messages ............................. 66Accessories .................................................. 67Calculator .................................................... 67Setting the alarm .......................................... 67Setting the timer ........................................... 68Configuring your phone with a car kit ............ 68Data parameters (depending on model) ....... 69WAP (depending on model) ......................... 70The WAP menus ......................................... 70Configuration of parameters ......................... 71Connection .................................................. 72Downloading objects .................................... 72Disconnection .............................................. 73Exit from the WAP function .......................... 73Icons ............................................................ 73Games ........................................................... 74Available accessories ................................... 75Available accessories .................................. 75Upkeep ........................................................ 75Battery ......................................................... 75Maintenance menu ...................................... 75Recommendations ....................................... 76Technical Characteristics ............................ 80Troubleshooting ........................................... 82myX-1a twin PCS_en_00.pmd 23/06/2004, 10:5015
1641OKCsghi236mno95jkltuv+7pqrsabcdefwxyz80Presentation of the phone(Depending on model)1 - Ear phone/Speaker2 - High definition graphics screen3 - Programmable lefthand key4 - Central key5 - Programmable righthand key6 - Scrolling arrows7 - Stop/End call8 - Operate/Call - Activation of hands-free9 - Cancel10 - Validate11 - Battery charging and accessories socket12 - MicrophoneWARNING!During a call, mind you do not obstruct themicrophone with your hand.1123457 8961012 11myX-1a twin PCS_en_01present.pmd 23/06/2004, 10:5016
17Presentation of the phone(Depending on model)1 - Ear phone/Speaker2 - High definition graphics screen3 - Programmable lefthand key4 - Central key5 - Programmable righthand key6 - Scrolling arrows7 - Stop/End call8 - Operate/Call - Activation of hands-free9 - Cancel10 - Validate11 - Battery charging and accessories socket12 - MicrophoneWARNING!During a call, mind you do not obstruct themicrophone with your hand.1123457 8961012 11myX-1a twin PCS_en_01present.pmd 23/06/2004, 10:5017
18Presentation of the phoneFunction keysSwitch off – Reject a call – Hang upSwitch on – Call a number – Receive a call – Hands-free mode (*)CShort press: Return to the previous menu – Delete acharacterLong press: Exit menu mode – Complete deletion ofthe entry OK Validate- Programmable keys for direct access to the functionsthat you have selected (depending on model)- Volume control during conversation (lefthand key  :lower, righthand key   : louder)- Contextual action@Mobile Internet access key (depending on model) and     Entry and scrolling through the menus.Alphanumeric keyboardMade up of 12 keys: 0 to 9,  ∗∗∗∗∗  and #.To obtain a letter, press successively on the relevantkey until the desired number or letter appears.Letters with accents are obtained by a long press on  ∗∗∗∗∗after entering the letter with no accent.Punctuation marks and special symbols are obtainedby a long press on the # key.myX-1a twin PCS_en_01present.pmd 23/06/2004, 10:5018
19Presentation of the phoneKey 1A long press on key 1 allows you to access thevoicemail service (depending on model).Key ∗∗∗∗∗A long press on key ∗∗∗∗∗ allows you to activate ordeactivate the silent mode.DisplayThe high definition graphics screen enables you to readmessages easily. Various icons inform you about thestatus of functions.Battery charge indicator (black if charged, clear ifdischarged)Received signal strength indicator (maximum strength:5 bars)The R letter indicates if the network found does notcorrespond to the subscriptionIf   flashes, the phone is searching for a networkHands-free loudspeakerCall in progressPermanent call forwardingSilent modeReceipt of messages and presence of messages notread.Flashing: message memory full.Voice messages present.myX-1a twin PCS_en_01present.pmd 23/06/2004, 10:5019
20Presentation of the phoneThe three keys located under the screen are allocatedto actions described at the bottom of the screen justabove the key, each time it is necessary.For example:Validate Pressing the righthand key   validates thecurrent function.Exchanging the front and back panelSwitch off the phone.1 Turn it over and slide the back catch upwards.2Take off the back cover starting at the bottom. Takeout the central section and the keypad.3 Position the keypad in the new front cover makingsure that no dust gets in, then follow with the centralsection.4 Replace the back cover, clicking in first the  upperpart then the lower and pushing the back catchdownwards into the locked position.3214myX-1a twin PCS_en_01present.pmd 23/06/2004, 10:5020
21Getting startedInformation on the SIM cardTo use your phone, you have a small card called a SIMcard. In addition to all of the information necessary forthe network, this card contains other information thatyou can modify:• secret codes (PIN and PIN2 - Personal IdentificationNumber)• directory• mini-messages• functioning of specific services.Your phone is compatible with the different SIM cardsprovided by the Operators.It is compatible with SIM/WIM cards (cards whichcontain in addition the WIM module (Wireless IdentityModule) which allows secured WAP communications).SIM cardThis card must be handled and stored withcare in order to avoid excessive stressesor scratches that would damage it. If yourSIM card is lost, contact your Operator orService Provider immediately.Note: Do not leave you SIM card within thereach of small children.myX-1a twin PCS_en_02Getting started.pmd 23/06/2004, 10:5021
22Getting startedInstalling the SIM card and the batterySwitch off your phone and disconnect the charger.The SIM card is inserted beneath the phone’s battery.1Turn your phone over and slide the backcatch up.2Take off the back cover, starting from the bottom.3Take out the battery.4Slide the card along the base beneath the retainingplate, with the gold coloured sections facing towardsthe phone and the cut-off corner lined up to matchthe drawing on the phone.5Place the battery by first inserting the upper sectioninto the opening.6Replace the back cover, clicking in first the upper partthen the lower and pushing the backcatch downwardsinto the locked position.123456myX-1a twin PCS_en_02Getting started.pmd 23/06/2004, 10:5022
23Getting startedCharging the batteryYour phone is powered by a rechargeable battery. Anew battery must be charged for at least 4 hours beforeit is used for the first time. It will reach its nominalcapacity after several usage cycles.When your battery has run down, the phone displays itand cuts out.To recharge your battery:Connect the charger to a wall outlet.Connect the end of the charging cable to the bottom ofyour phone.The phone will start charging. The battery chargingindicator indicates the charge.Charging stops by itself.Unplug the cable.It is possible that during charging, the battery may heatup slightly; this is normal.WarningThere is a risk of explosion if the batteryis incorrectly replaced or disposed of infire.Do not short-circuit.The battery does not contain anycomponents that can be changed byyou.Do not attempt to open the batterycase.Only use the correct chargers andbatteries as shown in themanufacturer’s catalogue.Spent batteries must be collected at theappropriate sites.You are advised to remove the battery ifyou intend to leave your phone unusedfor a long period.41ghi236mno95jkltuv+7pqrsabcdefwxyz80myX-1a twin PCS_en_02Getting started.pmd 23/06/2004, 10:5023
24Getting startedSwitching on/switching off,starting upTo switch on your phone:Press   to switch on your phone.If access to the SIM card is protected by a secret code,the phone will ask you to enter your PIN code.PIN codeThis is the personal code for your SIM card. You maybe asked to enter this code when the instruction: Pinnumber? appears after you switch on your phone.Enter the code of between 4 and 8 digits given to youby your operator. These digits will not be displayed onthe screen for security reasons.Press # or OK or on righthand key   to validate.PIN2 code (*)If one was given to you by your Operator, a second PINcode provides secure access to certain functions.Setting Time and DateThe first time the phone is used, the time and date willneed to be set.If the battery has completely run down or been takenout, you will be asked to validate the time and date.WarningIf the wrong PIN code is entered threetimes in a row, the card will be locked. Tounlock your card:- enter **05*- enter the PUK code (PersonalUnlocking Key) provided by yourNetwork Operator and validate,- enter your PIN code and validate,- enter your PIN code again and validate.After 5 or 10 times (depending on SIMcard type), the SIM card will bepermanently locked. Contact yourOperator or your Service Provider toobtain a new card.The same procedure (entering 052)applies when the PIN-2 code is blocked(PUK 2 code).Control of the PIN codeIf your phone displays SIM absent,press  (long press) to switch off yourphone and check that your SIM card iscorrectly positioned.myX-1a twin PCS_en_02Getting started.pmd 23/06/2004, 10:5024
25Getting startedSetting the timeSet the time either by typing it in or by using thescrolling arrows to alter the numbers already displayed.Setting the dateSet the date either by typing it in numerically or byusing the scrolling arrows to alter the display.When the time and date are correct, validate with theOK key.Searching for a networkThe phone then searches for a network on which it cancommunicate:If it finds one, the name of the network appears on thescreen.You are ready to make or receive a call.If the R letter and a network name are displayed, callscan be made.If the R letter is displayed without any network name,only emergency services will be accessible (police,ambulance, fire brigade).If the   flashes, the phone will keep searching. Nonetwork is available.Network indicatorThe indicator of the level ofnetwork signal received enablesyou to visualise the quality ofreception. If it shows less thanthree bars, look for better receptionto make your call in goodconditions.myX-1a twin PCS_en_02Getting started.pmd 23/06/2004, 10:5025
26Getting startedSwitching offHold down the   key until the end message isdisplayed.Release the key. The phone switches off.RecommendationYour phone is equipped with an integrated antenna. Forthe best reception, try not to cover the top part of thephone with your hand.Menu accessThe menu functions permit you to verify or modify thevarious functions of your phone to adapt it to yourneeds.Press the scrolling arrows   or   to access themenus.Scroll through the menus using the scrolling arrowsthen press OK to access the selected menu.Each time you want to validate an action, press OK.To abandon an action, press C.To exit the menu mode, press and hold C.Deleting charactersYou can cancel an entry error:Press quickly on C to delete the last character.Direct access to menusTo directly access a menu,  press then enter the number of the selectedmenu.myX-1a twin PCS_en_02Getting started.pmd 23/06/2004, 10:5026
27Initial communication - Hands-free modeMaking a callThe network is displayed.Dial the number.Press  .During the call,   flashes on the screen, and tonesmay signal the establishment of a connection.When the person you have called answers, speak.Receiving a callWhen you receive a call:Press   then speak.The caller’s number is displayed when it is presentedto the network.All incoming and outgoing call numbers are registeredin the list of the last calls.Volume controlIncrease or decrease the volume during a conversationby pressing the lefthand ( ) or righthand ( ) key.International callPress 0 (long press) to display + thendial the country code without waiting fora tone, then the number you require.Emergency servicesDepending on the operator, you cancontact the emergency services with orwithout a SIM card or when thekeyboard is locked. It is sufficient to bein a zone served by a network.To call the international emergencyservice, dial 112 then press    .Other emergency service numbers mayexist, depending on the country.myX-1a twin PCS_en_03comm.pmd 23/06/2004, 10:5027
28Initial communication - Hands-free modeThe “Hands-free” mode enables you tofollow a conversation with severalpeople and be free to move, forexample, to take notes during yourconversation.WarningBefore putting the phone to your ear,check the volume control settings aswell as the selected listening method,especially if using integrated hands freemode, which could cause ear damage ifused incorrectly.Hands-free mode (depending onmodel)During a call, you can transfer from handset mode tohands-free mode simply by pressing one key and thereverse.Press  .The screen displays   for handset mode and   for“hands-free” mode.Ending a callPress   .The end of call message appears on the screen.myX-1a twin PCS_en_03comm.pmd 23/06/2004, 10:5028
29DirectoryDirectory displayYou can store the phone numbers that you callregularly:- in the SIM card,- in the phone itself.Different icons will inform you of the directory locationwhere the number is stored when you search for it:SIM card directoryYour phone’s directorySIM card pre-set directory.Storing a numberIn the Directory menu, select Create record. Validateby pressing OK.Enter the name (the number of accepted charactersdepends on the SIM card used). Validate.Enter the number including the area code, if necessary(up to 20 characters). Validate.You can enter spaces in the number (displayed ascommas “,”) by pressing (long press) on ∗∗∗∗∗ or #. Thefigures entered after a space are processed in a DTMFsequence (usable after a number).If necessary, select the call group to which you want toassign this number.Depending on the available space, you can select thestorage location of the number entered: SIM card orphone itself.The quantity of phone numbers storedin the SIM card directory variesdepending on the capacity of the card.Your Operator or your Service Providercan provide you with this information.It is advisable to store numbers in theirinternational format (+, country code,and number). You can verify thecontents of a record and modify it byselecting the required name.When sorting by location, pressing onthe ∗∗∗∗∗ key launches a search for the firstavailable location; pressing on # returnsto the start of the list.myX-1a twin PCS_en_04Directory.pmd 23/06/2004, 10:5029
30DirectoryDeleting a numberTo delete the contents of a directory location, select thename using the scrolling arrows. Validate bypressing OK. Select Delete, then validate.Call groupsYou are also able to classify contacts recorded in thedirectory into Call Groups.To each of these groups you attribute certaincharacteristics (icon, ringing tone, vibrator, etc.).Creating a groupGroups are defined by default in your phone.In order to look up their characteristics, display a list ofthe groups - Directory/Directory menu/Call groupsmenu.Using the scrolling arrows, choose a group and pressOK. You are then able to look up or alter itscharacteristics or to erase the group.To create a new group:Go into Directory/Directory menu/Call groups.Choose Create group.Enter a name and validate.Choose an icon using the scrolling arrows and validate.Choose a ring tone, then choose a vibrator mode(depending on model), and validate.The selection of a call group is made when entering anumber into the directory, or when modifying a numberyou have already saved.myX-1a twin PCS_en_04Directory.pmd 23/06/2004, 10:5030
31DirectoryActivate the Call Groups functionIf you want the characteristics of the groups to apply toeach call:Go into Directory/Directory menu/Call groups.Choose Activate groups.Tick the box and validate.The calls received from contacts who do not belong toa Call group use the parameters provided in theRinging and beeps menu.Available memoryTo ascertain the number of groups which can still becreated:Go into Directory/Directory menu/Call groups/Group menu.Choose Available memory.The first number shows the number of groups whichcan still be created, and the second shows themaximum number of groups.Looking up a groupSelect the group to be looked up and press OK.Choose See group. The screen presents the name,the icon, and the choice of  vibrator mode of the group.If there are contacts attached to this group, press therighthand key   to view the list of these ones.If call groups are not enabled, youcannot attach correspondents togroups.myX-1a twin PCS_en_04Directory.pmd 23/06/2004, 10:5031
32DirectoryModifying a groupSelect the group to be modified, and press OK.Choose Modify.Carry out the wanted modifications.Validate by OK.Deleting a groupSelect the group to be deleted, and press OK.Choose Delete.Confirm by OK.SortingDirectory menu enables you to sort the storednumbers by name or location; for the latter, the freelocations are indicated in the list.Sending a short message to a storednumberSelect the recipient scrolling using the scrolling arrowsand validate using OK. Select Send message andvalidate using OK.Compose your text message.Press OK. Select Send and validate using OK. Therecipient number is displayed.Send your message using the righthand key  .myX-1a twin PCS_en_04Directory.pmd 23/06/2004, 10:5032
33DirectoryDirectory memory spaceIn Directory menu, select Available memory. Validateusing OK.The screen will display the amount of available spaceon the SIM card and on the phone itself.Displaying personal numbersUsing Directory menu/Personal numbers menu, youcan create records for your own numbers in order to beable to consult them.Making a call with a stored numberHere are all the ways you can call a correspondent,whose number you have saved in the directory, fromthe standby screen:1) Enter the number under which you have saved yourcorrespondent’s details, and then press on ∗∗∗∗∗ (rapiddial).2) Enter the number under which you have saved yourcorrespondent’s details, and then press on #.  Yourcorrespondent’s number is displayed, at which pointyou can modify or add to the number. Press on   tomake the call.myX-1a twin PCS_en_04Directory.pmd 23/06/2004, 10:5033
34MessagesReceiving a messageSeveral types of message may be received:• text messages• text messages which may include different types ofobjects (images, melodies, animated icons)• icons for call groups• animated screen savers• melodies• WAP bookmarks• WAP information.When you receive a message, the phone beeps (thebeep is selected using the menu Ringing and beeps/Volume and choice of music/Messages).The   icon is displayed on your phone screen.This icon remains on screen until the messages havebeen read. When the icon flashes, the memory is full.The receipt of icons, animated screen savers ormelodies can take several minutes. Messages informyou of the downloading progress.At any time, you can (depending on model):• hide that screen by pressing the lefthand key   (e.g.to make a call or access other information on yourphone),• or cancel the download in progress by pressing therighthand key  .Go into the Text messages menu to access the list ofmessages received.Access to this service depends on thenetwork. For more information, consultyour Operator or your Service Provider.Ask your operator about downloadingicon, animated screen saver or melodymessages.Unread messages are in bold.myX-1a twin PCS_en_05messages.pmd 23/06/2004, 10:5034
35MessagesMeaning of the symbols at the top of thescreenThis symbol indicates a text message that has beenwritten. If this symbol is flashing, it means that themessage has not been sent.This symbol indicates a message that has beenreceived. If this symbol is flashing, it means that themessage has not yet been read.This symbol indicates a message which is incompleteor in the process of being received.This symbol indicates that the message is corrupted: itconsists of several fragments, some of which havebeen lost.Meaning of the symbols in front of each messageCall group iconsAnimated screen saversText messagesMelodiesText messages which include objectsActions possible for a message receivedSelect a message.By pressing the lefthand key  , you can read a textmessage, view it, listen to it or extract the objects itcontains.myX-1a twin PCS_en_05messages.pmd 23/06/2004, 10:5035
36MessagesPress the lefthand key   (Options), to view the optionsavailable, which vary according to the type of messagereceived:• read it• delete it• reply• forward it to another person• consult the available memory• delete all the read messages• delete all the messages• choose a sending option• enter the number of the messaging centre• add a WAP bookmark (see below)• save it in your phone (melody, animated screen saverand icon (see below)).Adding a WAP bookmark in yourphone (depending on model)To add a WAP bookmark received:If you have just read it, choose the Add WAPbookmark option by pressing the lefthand key (Options).orSelect it in the list and choose the Add WAPbookmark option by pressing the lefthand key (Options).WarningOnly the screen savers and melodieswithout Copyright may be forwarded toanother person and depending onmodel.myX-1a twin PCS_en_05messages.pmd 23/06/2004, 10:5036
37MessagesSaving an object included in a text messagewhich has been received (depending onmodel)Some text messages may contain images, melodies(symbolised by a note of music) or animated icons.To save an object in your phone:Put the cursor on the object you wish to save.Press the righthand key   (Extract).Press the righthand key  .Select New and press the righthand key  .Type in a name and press OK.The space required and the space available in thephone are shown.If the maximum number of objects or the maximumtotal size has been reached, you will be asked if youwish to delete objects or replace an existing object withthe new one.Saving a melody in your phoneA melody is saved in the Ringing and beeps/Personalised ringing tone menu.If you have just listened to it, press the righthandkey .orSelect it in the list and choose the Save option bypressing the lefthand key   (Options).myX-1a twin PCS_en_05messages.pmd 23/06/2004, 10:5037
38MessagesThe space required as well as the space available inthe phone are indicated.If the maximum number of melodies or the maximumcapacity has been reached, you will be asked if youwish to delete some melodies or replace an existingmelody with the new one.This sign placed in front of a melody indicates that itcan be deleted and will free enough memory space tosave the new one.This sign placed in front of a melody indicates that itcan be deleted but will not free enough memory spaceto save the new one.Saving an animated screen saver on your phoneAn animated screen saver is saved in the Controls/Customization/Screen Saver menu.If you have just viewed it, press the righthand key  .orSelect it in the list and choose the Save option bypressing the lefthand key   (Options).The space required as well as the space available inthe phone are indicated.If the maximum number of animated screen savers orthe maximum capacity has been reached, you will beasked if you wish to delete some animated screensavers or replace an existing one with the new one.üWarningYou must view the entire screen saver inorder to be able to save it.myX-1a twin PCS_en_05messages.pmd 23/06/2004, 10:5038
39MessagesSaving an icon in your phoneAn icon is saved in the menu Ringing and beeps/Callgroups/Call groups menu.If you have just viewed the icon, press the righthandkey  .orSelect it in the list and choose the Save option bypressing the lefthand key   (Options).The space required as well as the space available inthe phone are indicated.If the maximum number of icons or the maximumcapacity has been reached, you will be asked if youwish to delete some icons or replace an existing onewith the new one.Receiving WAP information (depending onmodel)Internet servers may send you information messages.In case the phone is not connected to the WAP, awarning message is sent by SMS (preceded by thesymbol @ in the list of messages). When selectingRead, the phone directly goes to the WAP functionwhere a connection may be required for processing.Then you can read the information sent.myX-1a twin PCS_en_05messages.pmd 23/06/2004, 10:5039
40MessagesEditing a message using EasyMessage T9™The Easy Message T9™ function helps you to easilyenter messages.Select the Text messages/Write new... menu andpress OK.Selecting the editing languageSelect Options by pressing the lefthand key  ; scrolldown to languages and press OK, then scroll down tothe required Language and press OK.Using T9 modePress the key corresponding to the letter required,compose the word by continuing to press the keyscorresponding to the different letters, without worryingabout the display, until the whole word is entered: it willappear in negative, white on black.If the word proposed corresponds to the one you arelooking for, press 0 to validate it, create a space and goon to the next word.IIt is possible that there are several words in thedictionary that contain the same sequence of keyspressed. If the word that appears is not the one youwant, press the central key to scroll through the wordspresent in the dictionary, corresponding to thissequence of keys. When you find the word you want,press 0 to validate, type a space and go on to the nextword.As you go along, depending on the keyspressed, the software looks in adictionary for the corresponding wordsthat are most frequently used.T9™ mode is activated as soon as youcreate or modify a message.LanguageBy default, the language used is thatwhich is activated on the phone’s menudisplay (or English if a language notsupported by Easy Message T9™ isselected in the menu).myX-1a twin PCS_en_05messages.pmd 23/06/2004, 10:5040
41MessagesIf the word that you want does not appear in thedictionary, several additional modes allow you to varythe nature of the words entered.Additional entry modesThe righthand key   selects one mode or another.The 123 mode inserts numbers.The ABC mode enters words that do not exist in thedictionary or in another language. To obtain a letter,press successively on the relevant key until the desirednumber or letter appears.The # key allows you to enter symbols.  You will see apage of symbols (there are several pages available byscrolling up or down) corresponding to the numbers 0to 9. To select one of these, simply press thecorresponding number key, ie, 6 for ? After the symbolhas been entered in the text, the phone reverts to theprevious mode.The scrolling arrows keys allow you to access toseveral symbol lists.Capital lettersYou can type capital letters, by pressing the ∗∗∗∗∗ keybefore entering the relevant character. The followingcharacters will automatically return to lowercase.Words in capital lettersYou can also choose to type a whole word in capitalletters by pressing twice on the ∗∗∗∗∗ key before enteringthe word. It is possible to return to lower case mode bypressing once on the ∗ ∗ ∗ ∗ ∗ key.myX-1a twin PCS_en_05messages.pmd 23/06/2004, 10:5041
42MessagesPunctuation marksPunctuation marks are obtained by using either the 1key (except in 123 mode), or using the Insert symbolsmode (quick access using # key).Accented charactersAccented characters are automatically generated in theword in Easy Message T9™ mode. In ABC mode,press successively on the key until the accentedcharacter appears.Options available when writing a messagePress the lefthand key   (Options) to view the variousactions available:• Send your message• Store your message• Insert (depending on model)- images (already predefined in the phone, call groupicons or animated screen savers)- melodies (already predefined in the phone orpersonalised)- symbols:  the symbol attaches a of symbols (thereare several pages available by scrolling up ordown) corresponding to the numbers 0 to 9.  Toselect one of these, simply press the correspondingnumber key, ie, 6 for ? After the symbol has beenentered in the text, the telephone reverts to theprevious mode.The number of messages stored in theSIM card changes depending on the SIMcard capacity; contact your Operator oryour Service Provider. for furtherinformation.myX-1a twin PCS_en_05messages.pmd 23/06/2004, 10:5042
43MessagesPress OK to insert the image or melody you havechosen.Press C to delete the image or melody alreadyincluded in the text.Notes:- Predefined images and melodies are replaced by acode in the messages to reduce the size of themessages sent.- To be able to view the images or listen to themelodies, the person to whom a message thatincludes inserted objects is sent must have anEMS compatible phone.• Languages: T9 mode can be used in differentlanguages- Scroll to the required language and press OK, theT9 mode will use this selected language.• Formatting: the following options are available:- text alignment (this option applies to all the texttyped in),- font size (the size applies to all characters typed inafter you have selected the size),- style (for example, bold) (the style applies to allcharacters typed in after you have selected thestyle).Note: depending on the font, certain sizes or stylesmay not be available.• De-activate Zoom• Cancel.myX-1a twin PCS_en_05messages.pmd 23/06/2004, 10:5043
44MessagesOptions for messages in the listWhen a message has been selected from the list ofmessages, pressing the lefthand key   (Options)displays the following actions:• read it• send it• delete it• modify it.When Write new... has been selected from the list ofmessages, press the lefthand key   (Options) to:• find out how much memory is available• delete the messages that have been read• delete all the messages• select a send option (acknowledgement, reply given,period of validity, message format)• enter the message centre number.Reply to a received message by selecting the relevantmessage from your list with the up and down key andthen press the central   key.When sending a long message, thenumber next to the icon   indicates thenumber of calls required to send themessage.myX-1a twin PCS_en_05messages.pmd 23/06/2004, 10:5044
45CallsForwarding callsForwarding voice callsDepending on your subscription, this service allows youto transfer incoming calls to another number or amailbox.Scroll through the menu to activate the type offorwarding that you require:• Forward all voice calls: all incoming calls areforwarded to a number you define• Forward all conditional calls• Forward calls when your line is busy• Forward calls when there is no answer on yourextension after a period that you can define byanswering the questions on the menu• Forward calls when your phone is unavailable,outside of network coverage or switched off.Enter the number to which you want to forward yourcalls. If necessary, include the area code you woulduse if you were calling the number from your phone.Validate by pressing the rightand key  .A message on the screen confirms that forwarding hasbeen activated.You can also cancel all types of forwarding.You can view the status of a type of call forwarding inorder to verify whether it is active or not. This functionis also useful for controlling the number to which yourcalls are forwarded. The information supplied isprovided by the network.Look out for incompatibilities; for moreinformation, consult your Operator oryour Service Provider.The forwarding number to the messagingcentre depends on the subscription type.WarningCancellations of forwarding can causeparticular reactions in certain networks.myX-1a twin PCS_en_06Calls.pmd 23/06/2004, 10:5045
46CallsForwarding data or faxesDepending on your subscription, this service permitsyou to transfer data or faxes that are addressed to youto another number.You can activate the data or faxes forwarding service,to enter the required number, cancel it and view thestatus of the service.Viewing the list of the last numbersusedYou can consult the list of the last numbers used(outgoing and incoming if available).To redial a number:Select from the list using the scrolling arrows.Make the call by pressing on  .Shortcut: from the standby screen, press on  .Monitoring the duration and cost ofcalls (*)On the Counters menu you can view the duration ofthe last call and all calls made since the last deletion.The Delete durations menu enables you to delete theduration of the last call and reset to zero the total callscounter.On the Costs (*) menu you can view the cost of thelast call and all calls made since the last deletion.For services specific to a network, suchas mailboxes, short dialling is only validwhen covered by the particular network.You may possibly prefer an internationalnumber.This memory is linked to the phone andnot to the SIM card.Several options are available for thisnumber: store it in your directory, sendit a short message, delete it. You canalso delete the whole list of numbers.This data is purely indicative and doesnot represent proof.  The meteringcriteria for the network can beappreciably different (indivisible minutes,etc.).myX-1a twin PCS_en_06Calls.pmd 23/06/2004, 10:5046
47CallsThe Delete costs (*) menu enables you to clear thecost of the last call and to reset the call counter afterentering your PIN2 code.The Display of duration menu enables you to selectthe duration display during a call.Displaying the numbersThis menu permits you to see the status of the displaynumbers function for:• your identity (phone number)• the identity of the person calling you.Anonymous modeYou can decide whether the person you are calling isgiven your phone number or not.•Preset: the phone network default mode.•No: you do not wish to use the anonymous modeand the person you are calling will know yournumber.•Yes: you wish to use the anonymous mode andthe person you are calling cannot know yournumber.Your number• On outgoing calls you can check that your phonenumber is displayed on the phone of the person youare calling (CLIR).• On incoming calls, you can check that the telephonenumber of a phone to which you are transferring callswill appear on the phone of a person calling you(COLR).myX-1a twin PCS_en_06Calls.pmd 23/06/2004, 10:5047
48CallsCallers Number• On outgoing calls, you can see the phone number towhich your call is being transferred (COLP) if theperson you are calling has authorised his or heridentity to be displayed by deactivating the COLRoption.• On incoming calls, when it is activated, this functiondisplays on your phone the phone number of theperson calling (CLIP). This function is only possible ifthe caller has authorised his identity to be displayedby deactivating his CLIR option.Authorising double call(Service depending on the operator)During a call, a special tone can inform you thatanother caller is trying to reach you. The caller’snumber - and name, if stored - is displayed on thescreen.During a call, when pressing the central key, thelefthand key   changes function and gives access todifferent possibilities of actions with this call.Configuring automatic redialYou can activate automatic redial either by default or ondemand.Call waitingYou can activate, deactivate and viewthe status of the call waiting service inorder to check whether it is active or not.myX-1a twin PCS_en_06Calls.pmd 23/06/2004, 10:5048
49CallsBlacklistThe blacklist is used to limit failures on automaticcalls (calls generated by the automatic redial functionor by applications: data, fax for example).When several automatic calls failed with a number(number busy or unknown), this number is put in theblacklist and no automatic call will be done with thisnumber any more until you delete it from the blacklist.Note: this function does not apply to the callsperformed manually.Voice mail numberTo program a special permanent call number, type inthis number and validate.This number is used when calling the voice mail centrewith the programmable keys.Local information distributionThis menu allows you to activate and select receptionof information distributed by the network.Replacing the international prefix(Depending on model)In the event that a call is not possible with the “+”prefix, you have the option of  choosing a replacementprefix with no need to change the number(s) alreadyrecorded with the prefix + in the directory.myX-1a twin PCS_en_06Calls.pmd 23/06/2004, 10:5049
50CallsPlacing calls on hold(Service depending on the operator)During a call, you can put the current call on hold bypressing OK.During a call, when pressing the central key, thelefthand key   changes function and enables you toaccess different options for the call.Multi-conferencing (*)(Service depending on the operator and depending onmodel)A multi-conference is limited to 6 participants: 5 in amulti-conference and one additional callDuring a call, when pressing the central key, thelefthand key   changes function and gives access todifferent possibilities of actions with this call.Standard commandsSequences of standard keys also permit access toservices such as call notification, call holding, multi-conferencing, and open up additional possibilities:0   Reject a call holding or waiting (or multi-conferencecalls).1  End the current call holding or waiting (or the multi-conference calls if there are any) and accept the call(or multi-conference calls).1 X  End the current call order number X.Multi-conferencing enables you to talk toseveral callers (depending on thenetwork capacity and on the model).WarningIn this case, pressing   ends all calls.myX-1a twin PCS_en_06Calls.pmd 23/06/2004, 10:5050
51Calls2  Place on hold the current call (or multi-conferencecalls) and accept the call holding or waiting (or multi-conference calls).2 X  Place on hold the multi-conference calls except for thecurrent call order number X  (private call).3  Add a call holding (or multi-conference calls) to thecurrent call (or to the multi-conference).Tel N°  Place on hold the current call (or the multi-conferencecalls) and call another phone number.Note:If you use this feature, we recommend that you firstplace the current caller on hold, then dial the newnumber as a courtesy to your caller and to ensureprivacy with the other party if desired.End all calls except for a possible call waiting.myX-1a twin PCS_en_06Calls.pmd 23/06/2004, 10:5051
52Ringing tonesSelecting the volume and the type ofringing toneYou can set your phone to ring on receiving callsand/or messages.You can, during adjustment, listen to the melodyselected or not: activate or deactivate by pressing thecentral key; the symbol   appears barred or not.Select the ringing tone required using the scrollingarrows.Press the righthand key  to move on to the nextsection.Select the volume required for using the phone with thescrolling arrows (from 1 to 4 and + for the volumecrescendo) and validate using OK.Press the righthand key  to move on to the nextsection.Select the volume required for using the hands free caror pedestrian kit with the scrolling arrows (from 1 to 4and + for the volume crescendo) and validateusing OK.Call groupsSee chapter How to use the directory for all thefunctions about call groups.Downloaded iconsIf you have saved icons received by message(see Text messages chapter), they will appear in themenu Ringing and beeps/Call groups/Call groupsmenu.There are numerous tunes available(including a “silent ringing tone”) andseveral volume levels including acrescendo.myX-1a twin PCS_en_07ringtones.pmd 23/06/2004, 10:5052
53Ringing tonesIf you select an icon in the list, it will appear at the topof the screen.You can then delete it or select one of the followingoptions:• change its title• consult the available memory• delete the selected icon• delete all saved icons.Personalising the ringing tone(depending on model)You have the option of creating a personalised calltune. A help menu, accessible by pressing therighthand key , will guide you.If you have saved melodies received by message(see Messages chapter), they will appear in that menu.You can then modify the selected melody (if thecopyright allows it), listen to it or select one of thefollowing options:• change its title• send it by message to another person (if it is notCopyright protected)• consult its memory capacity• consult the available memory• delete the selected melody• delete all melodies.myX-1a twin PCS_en_07ringtones.pmd 23/06/2004, 10:5053
54Ringing tonesSetting the vibrator (depending onmodel)Using the scrolling keys, select one of the followingoptions: inactive vibrate, only vibrate, vibrate then ring.Validate by pressing the righthand key  .Selecting silent mode (depending onmodel)If you want the ringing tone of your phone to bereplaced by the vibrator and the beeps to besuppressed (except for the alarm tone), tick the boxand validate by  pressing OK.You can also activate/deactivate the silent mode byholding down the ∗ ∗ ∗ ∗ ∗   key.This mode is indicated by the symbol  on the screen.Setting the beepsDifferent controls are available:Setting the keypad tonesSelect the tone required using the scrolling arrows andvalidate (press the righthand key ).Wherever you require your calls to arrivediscreetly, you can use the vibrator orselect the silent mode.Silent mode is automaticallydeactivated when the hands free car kitis connected as well as when thephone is switched on/off.You can select the tones produced byyour keypad: Beep, DTMF (musicalkeys) or non active tones (in this lastcase, when you press your keyboard, itdoes not make a noise).myX-1a twin PCS_en_07ringtones.pmd 23/06/2004, 10:5054
55Ringing tonesSetting the network toneIf you want your phone to give a warning beep when itlocates a network on which it can communicate:Tick the box and validate by pressing OK.Setting the low battery toneIf you want your phone to give a warning beep whenyour battery is low:Tick the box and validate by pressing OK.Deleting DTMF tones (depending onmodel)You can delete the emission of DTMF tones during acall. You can thus make a call, in a comfortable anddiscreet way for you caller.To be discreet, clear the selection from the box.Validate by pressing OK.myX-1a twin PCS_en_07ringtones.pmd 23/06/2004, 10:5055
56SettingsCustomizing your phoneInstalling the energy saving modeIn order not to use the phone’s screen light and therebyincrease its operating time:In the Customization/Energy saving menu, check Nolight and press OK to validate.Configuring the idle modeYou can choose between an animated idle screen orthe economy mode.In the Customization/Screen Saver menu, use thescrolling arrows to select the animation you want, atext, a banner or the economy mode.Press the righthand key  to access the setting of theanimation or economy mode activation interval.Press OK to validate.To exit the animation or economy mode, press  .If you have saved animated screen savers received bymessage (see Messages chapter), they will appear inthat menu.The following options are available according to thetype of screen:• validate the animated screen savers as defaultscreen• change its title (only downloaded screens)• consult its memory capacity• consult the available memoryThe frequency of display of the screensaver has a direct impact on the phone'soperating capacity. For optimal operatingcapacity, set the maximum interval.myX-1a twin PCS_en_08settings.pmd 23/06/2004, 10:5056
57Settings• consult the available memory• delete the selected screen• delete all screens.Personalising the welcome screen(Depending on model)You can personalise the welcome screen of your phoneby typing a text. Validate by pressing OK.Customizing the programmable keys(Depending on model)This menu, accessible directly by a short press on aprogrammable key from the standby screen, enablesyou to configure the lefthand   and righthand   keys.There are different possibilities for each of the keys:DirectoryValidate Directory.When you press the key, you can see the names in thedirectory.Rapid dialSelect a name from the directory and validate. Whenyou press the key, you will automatically call the nameselected.The action allocated to a programmablekey is triggered by a long press or twoshort presses only from the standbyscreen.myX-1a twin PCS_en_08settings.pmd 23/06/2004, 10:5057
58SettingsSilent mode (depending on model)Validate Silent mode.The ringing tone of your phone will be replacedautomatically by the vibrator and all the beeps will besuppressed (except for the alarm).Call voice mailValidate Call voice mail.When you press the key you will automatically call yourmailbox number.Text  messagesValidate Text messages.When you press the key you can read the shortmessages stored in the SIM card or in the phone itself.View callsValidate View callsWhen you press the key, you can view the list of thelast calls made and received if available.Selecting the display languageYou can select the language in which you wish yourphone display to operate:Select AutomaticThe display language will be that of your SIM card (ifavailable).Otherwise select the language of your choice using thescrolling arrows and validate by pressing OK.Silent mode    This mode, indicated on the screensaver, is automatically deactivated/activated when the hands free kit isconnected.myX-1a twin PCS_en_08settings.pmd 23/06/2004, 10:5058
59SettingsSelect the type of responseYou can reply to a phone call:- either automatically, if you have ticked the Automaticans. box (for a hands free kit) and validated bypressing OK- or by pressing any numeric key if you have ticked theAny key and validated by pressing OK.Selecting the networkEvery SIM subscription card can store an ordered list ofpreferred networks.If the list has not been programmed, or if none of thenetworks on the list are available or authorised, thephone searches for an authorised network providingthe highest level of signal.If none of the available network is authorized, you canuse your phone to make emergency calls only until anetwork connection can be re-established.If no network is available, your phone continues tosearch for one.In all cases, the phone searches for its home networkfirst.NetworkWhen your home network is notaccessible (abroad, for example), yourphone automatically searches foranother available and authorisednetwork in the order of preferenceindicated by the list on the SIM card.myX-1a twin PCS_en_08settings.pmd 23/06/2004, 10:5059
60SettingsAvailable networksThis menu enables you to start a search for allavailable networks at the present location and todisplay them.Use the scrolling arrows to scroll the available networksand validate the one wanted (press the righthandkey ).Preferred networksTo program a list of preferred networks into yourSIM card:Use the scrolling arrows to select from the list.Validate.If the network is not on the list, select the country codethen the network code (ask the organisation from whichyou obtained the SIM card).Setting the time and dateSetting time/date/Control menuSet the hours and minutes by pressing on thecorresponding numbers or by scrolling through thevalues using the  or   arrows.Press the righthand key  to go to the next setting.Set the day, month and year.Press OK to validate.Depending on model, you can choose amanual selection for a network search.myX-1a twin PCS_en_08settings.pmd 23/06/2004, 10:5060
61SettingsSetting time/date/Display menuUse the scrolling arrows to select the type of clock tobe displayed on the screen or to display no clock.Press OK to validate.Controlling screen contrastControl screen contrast using the scrolling arrows, andvalidate by pressing OK.Converting currenciesThis menu enables you to convert one currency intoanother. Using the scrolling arrows, you can select:Rapid exchangeIf you tick the Rapid exchange box, the converter willoperate on the standby screen, enter the digits requiredand use the scrolling arrows to perform a conversion.Exchange rateEnter the conversion rate corresponding to the twoselected currencies.CurrenciesEnter the symbols of the two currencies to convert. Along press on C returns to the beginning of the line toenter them (if the symbols are already entered).myX-1a twin PCS_en_08settings.pmd 23/06/2004, 10:5061
62SecurityLocking the keyboardThis menu enables you to lock your phone’s keyboardto prevent calls from being made unintentionally in yourbag or pocket.Tick the Lock box: the keyboard will automatically belocked.To unlock your keyboard:Press ∗∗∗∗∗ then OK.After unlocking, the keyboard will be locked after acertain period.Changing the PIN numberYou can change your PIN number:To the question: Old pin number ?, enter your old PINcode and validate (press the righthand key ).To the question: New pin number ?, enter your newPIN code (a number between 4 and 8 digits) andvalidate by pressing OK.To the question: Verify pin numb. ?, enter your newPIN code a second time to verify and validate bypressing OK.Checking the PIN numberYou can activate your PIN number so that it isrequested and checked every time the phone isswitched on, so that if the phone is lost or stolen, yourSIM card cannot be used:To the question: Pin number ?: enter your PIN numberand validate (press the righthand key ).Locked keyboardYou can still make emergency calls andanswer calls.For a quick  keypad locking, press ∗∗∗∗∗then OK from the standby screen.WarningIf the wrong PIN code is entered threetimes in a row, the card will be locked.To unlock your card, call theorganisation which issued your card forguidance in unlocking it.If your SIM card is permanently locked,contact your Operator or your ServiceProvider to obtain a new card.myX-1a twin PCS_en_09security.pmd 23/06/2004, 10:5062
63SecurityTick the box Pin num. control and validate bypressing OK.Changing the PIN2 number (*)You have a second PIN number. The procedure formodifying the PIN2 number is identical to that for thePIN number.Changing the phone codeThe Phone code menu enables you to activate thephone code so that it is requested and checked eachtime the phone is switched on, in the case of a differentSIM card being used.If the incorrect code is entered, the time intervalbetween each attempt increases, making useimpossible.To change the phone code, you must first check that itis active (Control phone code menu).To activate:To the question: Phone code?, enter 0000 andvalidate (press the righthand key ).Tick the Phone control box and validate bypressing OK.To deactivate:To the question: Phone code?, enter your code(possibly changed) and validate (press the righthandkey ).Do not tick the Phone control box and validate bypressing OK: it will reset the code to 0000.The phone code is a secret code,intended to protect the phone in theevent of theft. It is linked automatically tothe SIM card present on activation.myX-1a twin PCS_en_09security.pmd 23/06/2004, 10:5063
64SecurityOnce the phone code is activated, you can modify it:To the question: Old phone code?, enter your oldphone code and validate (press the righthand key ).To the question: New phone code? enter your newphone code (a number of between 4 and 8 digits) andvalidate by pressing OK.To the question: Verif. phone code? enter your newphone code a second time to verify it and validate bypressing OK.Changing the operator password (*)Depending on model, you have an operator passwordsupplied by the network operator. The procedure formodifying this password is identical to that for yourPIN code.Limiting incoming calls (*)Depending on your subscription, this service enablesyou to restrict certain types of incoming calls.If you have this service, you will have been providedwith a password when you subscribed. This passwordis necessary to activate this function.You can activate, deactivate, and view the status of thetype of call barring. You can also cancel ALL types ofbarring.The restriction can apply to ALLincoming calls or to incoming calls whenyou are not in your home country (if youhave roaming).Access to this service depends on yoursubscription type.  For more informationcontact your Operator or ServiceProvider.myX-1a twin PCS_en_09security.pmd 23/06/2004, 10:5064
65SecurityLimiting outgoing calls (*)Depending on your subscription, this service stopscertain types of outgoing calls being made from yourphone.If you have this service, you will have been providedwith a password when you subscribed. This passwordis necessary to activate this function.You can activate, deactivate, and view the status of thetype of call barring. You can also cancel ALL types ofbarring.Setting up the pre-set directory (*)The pre-set directory allows you to limit calls. Whenyou activate this directory, only the numbers you storein this directory can be called.Before creating it, you must first activate it:Display the Pre-set directory menu.Enter your PIN2 number.Tick the Pre-set directory box.Validate by pressing OK.To create the pre-set directory, proceed as you wouldproceed for another directory (see chapter How to usethe Directory/Storing a number).Access to this service depends on yoursubscription type.  For more informationcontact your Operator or ServiceProvider.The restriction can apply to ALLoutgoing calls, to all yourINTERNATIONAL outgoing calls or tooutgoing international calls EXCEPTthose sent to your HOME country.This directory is linked to the SIM card.Thus, its size is determined bylimitations of this card.myX-1a twin PCS_en_09security.pmd 23/06/2004, 10:5065
66SecurityCharge checking (*)The Settings menu allows you to select the type ofcharge indication after entering your PIN2 code:- Currency: enter the currency name (maximum3 characters) and charge per unit. Ask your operatorfor this value.- Telephone unit.The Limitation menu allows you to activate the creditfunction in the selected currency after entering yourPIN2 code.Confidentiality messagesThe function Confidentiality messages allows you todelete automatically the numbers recorded in the CallServices menu and the text messages that are in thephone's memory when a new SIM card is inserted. Thisfunction is activated/deactivated in the menuConfidentiality messages.WarningThese functions depend on the abilityof the network to send charge data toyour phone in real time, and on thecapacity or options on your SIM card.myX-1a twin PCS_en_09security.pmd 23/06/2004, 10:5066
67AccessoriesCalculatorYou can operate the calculator using the following keys:Addcentral key Subtract∗∗∗∗∗Multiply# DivideOK EqualsC DeleteLong press on:       ∗       ∗       ∗       ∗       ∗ or # or @ or  Decimal pointMonetary operations if there is no calculation inprogress(See chapter Phone adjustment)   Monetary conversionFrom the standby screen, you can convert a currencyinto another according to the settings chosen(calculator key  ) or menu (Controls/Currencyconverter).Setting the alarmTo use your phone as an alarm clock:Using the numbers or the scrolling arrows, set thealarm time.Press the righthand key  to go to the next item.Set the minutes.Tick the box and validate by pressing OK.The alarm function is represented onthe screen by the symbol  .Permanent flashing of this symbolindicates that an alarm time has beenprogrammed but the date and timeclock has not been initialised.myX-1a twin PCS_en_10accessories.pmd 23/06/2004, 10:5067
68AccessoriesThe ringer is stopped by pressing any key; the alarmremains programmed.The alarm function remains active when the phone isswitched off. It is not affected by silent mode.Setting the timerThe same procedure is applied as for the alarmfunction, but in this case you start a time clock runningagainst a defined value. The phone must remainswitched on.Configuring your phone with a car kit(Depending on model)As regards the phone, there are several options:Programming the switch-off delay on yourphoneSet the phone off delay using the numbers or scrollingarrows.Press the righthand key  to go to the next item.Tick the box and validate by pressing OK.To use your phone with a hands-free kit,see the notes supplied with the kit.This delay starts counting down as soonas the end of a call is detected.myX-1a twin PCS_en_10accessories.pmd 23/06/2004, 10:5068
69AccessoriesProgramming the alarm timingYou can be notified  that your phone is ringing whenyou are not in your car.For an external warning, set the delay using the digitsor scrolling arrows.Tick the box and validate by pressing OK.Data parameters (depending onmodel)You can set the serial link speed when using ATcommands.This can only happen when the vehicleis not running.myX-1a twin PCS_en_10accessories.pmd 23/06/2004, 10:5069
70WAP (depending on model)The WAP function allows connection to Internet sites.Thus, you can connect to sites, among others, whichallow downloading of melodies, icons or animatedscreen savers.The WAP menusFrom the standby screen, press on the central key toaccess the local menu for WAP functions.The Services menu, pop-up menu, may be displayedat any time when navigating in the WAP function. Itcontains the following sub-menus:Home: connection to the home page.Bookmarks: from the standby screen, following anumber key with the central key initiates access to thefavourite corresponding with the number.You can receive bookmarks by message and add themto this list (see Text messages chapter). You can alsosend some by message:select a bookmark, press the lefthand key  (Options)then select Send by SMS.Go to the URL: this menu enables you to directly enteran Internet address.Inbox: this menu enables to read the messages sentby the Internet site.Reload: updating of the current page.Reset cache: empties data stored from previousconnections.Advanced...: see § Configuration of parameters.About...: Information about OpenwaveTM.Exit: return to the phone standby screen.Depending on model, scrolling menu 0allows you to access the WAP function.Bookmarks enables you to record adirectory of Internet site names andaddresses for easy and fast access.When navigating in WAP, you can returnto Menu Services at any time bypressing the green key .The WAP browser remains the exclusiveproperty of Openwave. It is thereforehighly prohibited to modify, translate,reverse engineer, de-compile ordisassemble the browser or any partthereof.WAP: Wireless Application Protocol –This is a protocol which converts Internetlanguage into the language which can beunderstood by a mobile phone.The WAP browser is licensed from:myX-1a twin PCS_en_11WAP.pmd 23/06/2004, 10:5070
71WAP (depending on model)Configuration of parametersAdvanced... menu: access to sub-menus:•Connection settings which allow you to set theparameters for several access providers (dependingon model). The current access service has a star infront of it.Configuration of WAP parameter- Select the desired access service using the scrollingarrows then press on Modify (lefthand key ).- Enter the name of the service then validate.- Enter the internet address of the home page thenvalidate.- Enter the connection settings.- Press on Details (lefthand key ).a user name,a password,the IP address of the WAP gateway: enter the IPnumber using the central key (Next) then chooseSecure or Non secure.the call number,the access mode (digital or analog).Once all the parameters are entered, you canactivate the selected service.- Confirm your choice with OK.All of the information to be entered in thesettings is supplied by your operator orservice provider.myX-1a twin PCS_en_11WAP.pmd 23/06/2004, 10:5071
72WAP (depending on model)•Show URL which presents the current Internetaddress.•Disconnect which ends the communication (allows anavigation whithout being connected).•Circuit prompt which enables to activate or not theconnection confirmation message at each connectionattempt.• Linger timer enables you to set a time limit, afterwhich the phone will disconnect automatically if youhave forgotten to disconnect from a service.•Security which enables a server identification by thephone for security reasons.•FastW@p (depending on model) which providesquicker access to the pages of Internet sites.ConnectionFrom the Home menu, start up connection to aservice.Once connected to a service, press on G then [Menu]to return to the local menu.Downloading objectsYou may connect to some Internet sites, allowingdownload of melodies, icons or animated screensavers. Once downloaded, they are in the inbox. Then,you can save them in your phone (same procedure asthe one for SMS download).When connecting on the GSM network,the @ character flashes, and the cost ofcommunications starts to clock up assoon as it stops flashing.myX-1a twin PCS_en_11WAP.pmd 23/06/2004, 10:5072
73WAP (depending on model)DisconnectionDisconnection is achieved by pressing on G then[Menu] and then by using the Advanced... menu andDisconnect.The @ character disappears from the sreen.Exit from the WAP functionTo exit from the browser and end the currentcommunication (if necessary):- pressor- from the local menu, select Quit and validate bypressing OK.IconsThe G icon enables you, by pressing the central key, toaccess two display modification possibilities:- the zoom to change the size of characters bypressing on the lefthand key  succesively,- full screen display by pressing on the righthandkey .You will be automatically disconnectedafter a short pause if you have forgottento disconnect from a service.myX-1a twin PCS_en_11WAP.pmd 23/06/2004, 10:5073
74GamesDepending on the model, several games are available.The presentation menu guides you on how best  to usethem.myX-1a twin PCS_en_12games.pmd 23/06/2004, 10:5174
75Available accessoriesAvailable accessoriesDepending on the model, different accessories areavailable on your phone:• Additional batteries• Additional chargers• Desk charger• Cigarette lighter adapter• Hands-free kits• Front and back covers in different colours• A cable for data exchange between your phone and aPC (depending on model).UpkeepClean your phone using a soft slightly damp non fluffycloth.BatteryAfter a long period of non use (several months), whenthe charger is being connected, the unit might notswitch on.In this case:Disconnect the charger, wait a few seconds, and plug itin again.It may be necessary to repeat this several times.Maintenance menuThis menu contains information that you could beasked for to perform specific operations. If they arerequired, you will be shown how to find information youneed.WarningDo not connect/disconnect the specialsocket on your phone during a call.The use of the EXTERNAL SIGNALfunction to activate the lights on avehicle or the horn, in order to take acall on a public road, may not beauthorised.WarningCertain chemical products can damageplastic. Do not use aerosols, certainspecial cleaning products, corrosiveproducts, solvents, alcohol anddetergents.myX-1a twin PCS_en_13acess-upkeep.pmd 23/06/2004, 10:5175
76RecommendationsThe use of your phone is controlled by safetyregulations intended to protect both the user and his/her environment.Electrical safetyOnly use the appropriate chargers contained in themanufacturer’s catalogue. Using another charger couldbe dangerous and will invalidate the manufacturer’swarranty.The main plug socket must be easily accessible. Themain voltage should correspond to that given on themanufacturer’s plate on the charger.Airplane safetyIn an airplane, your phone must be switched off toensure that it does not interfere with the planessystems.Its use is illegal and you could be prosecuted orbanned from using cellular networks in the future if youdo not abide by these regulations.Areas containing combustiblesIt is advisable to switch your phone off in the vicinity ofgas stations.Regulations limit the use of radio equipment inchemical factories, gas depots and any area wherethere are mines. You are advised to abide by theserules.CE marking on the unit conforms todirectives 1999/5/EC, 89/336/CEE and73/23/CEE.RecommendationsmyX-1a twin PCS_en_14recommendations.pmd 23/06/2004, 10:5176
77RecommendationsRoad safetyExcept in an emergency, do not use your phone whendriving  without a hands-free kit  that enables you tomaintain your freedom of movement. Always keep youreyes on the road when you are driving.To make a call, pull to the side of the road, then makeyour call. Abide by the current laws.The phone must be shielded sufficiently from electronicequipment in the vehicle. It gives off micro-waves,which may affect the operation of such equipment.Installation of your phone in a vehicle must only beperformed by qualified personnel.Non ionising radiationTo obtain maximum satisfaction from your phone, use itin a vertical position. Your personal safety can only beimproved by doing so.Electronic medical equipmentYour phone emits radio waves that could possibleinterfere with electronic medical equipment, forexample an auditory prosthesis, heart pacemakers, …Your doctor or the manufacturer of the medical item willbe able to advise you on whether your phone couldcause such interference.In hospitals, the phone must be switched off.WarningEnsure that no part of your body ispermanently close to the aerial unlessthere is a metal screen (e.g.: a vehicleroof…).myX-1a twin PCS_en_14recommendations.pmd 23/06/2004, 10:5177
78RecommendationsGeneral precautionsDo not attempt to open your phone and repair ityourself. The manufacturer cannot be held responsiblefor any damage/accident that may result from this.Any work carried out by non-authorised personnel willinvalidate your warranty.Do not use your phone in damp areas (bathroom,swimming pool, …). Protect it from liquids and othermoisture.Do not expose your phone to extreme temperatures(from - 10°C to + 55°C).Do not leave your phone within the reach of smallchildren (certain removable parts may be accidentallyingested).Use your phone with original accessories, or yourwarranty will be rendered invalid.The physicochemical processes created by chargersimpose temperature limits when charging the battery.Your phone automatically protects the batteries inextreme temperatures.Removing the battery may mean that the time is lost.You are strongly advised not to connect your phone tothe charger if it doesn’t contain a battery.To avoid the risk of demagnetisation, do not letelectronic devices close to your phone for a long time.myX-1a twin PCS_en_14recommendations.pmd 23/06/2004, 10:5178
79RecommendationsSAGEM SA cannot be hold responsible for thecontents of messages, programs and downloadableobject and for the direct or indirect damage which maybe cause to the user of the phone or the phone itself.Note on downloading facilitiesYour mobile phone allows you to download ringtones, iconsand animated screen savers. You must check that theseobjects are free of copyright. SAGEM is not responsible forthe content of downloaded objects.Some of these objects may contain data which may causemalfunction or loss of data within your mobile phone (ie, avirus).For this reason, SAGEM declines all responsibility for (1) thereception of data that has been downloaded or loss of saiddata, (2) the consequences on the operation of the mobilephone and (3) damage resulting from the reception of saiddownloaded data or loss of said data. Moreover, SAGEMdraws attention to the fact that problems caused by thereception of downloaded data that does not comply withSAGEM’s specifications are not covered by the guarantee.Consequently, the cost of diagnosing and repairing mobilephones affected by said downloaded data will be charged tocustomers.The software program developed by SAGEM remains theexclusive property of SAGEM SA. It is therefore highlyprohibited to modify, translate, de-compile or disassemble thissoftware program or any part thereof.myX-1a twin PCS_en_14recommendations.pmd 23/06/2004, 10:5179
80Technical CharacteristicsWeight: 92 gSize: 106 x 46 x 20 mmVolume: 78 cm3Original battery: Lithium Ion 680 mAh, 720 mAh or780 mAh (depending on model)Battery life calls/standby: up to 3 h 30/300 hThis model phone meets the government's requirementsfor exposure to radio waves.Your mobile phone is a radio transmitter and receiver. Itis designed and manufactured not to exceed the limits forexposure to radiofrequency (RF) energy set by theFederal Communications Commission of the U.S.Government. These limits are part of comprehensiveguidelines and establish permitted levels of RF energy forthe general population. The guidelines are based onstandards that were developed by independent scientificorganizations through periodic and thorough evaluation ofscientific studies. The standards include a substantialsafety margin designed to assure the safety of allpersons, regardless of age and health.The exposure standard for mobile phones employs a unitof measurement known as the Specific Absorption Rate,or SAR. The SAR limit set by the FCC is 1.6 W/kg.* Testsfor SAR are conducted using standard operatingpositions accepted by the FCC with the phonetransmitting at its highest certified power level in alltested frequency bands. Although the SAR is determinedat the highest certified power level, the actual SAR levelof the phone while operating can be well below themaximum value. This is because the phone is designedto operate at multiple power levels so as to use only thepower required to reach the network. In general, thecloser you are to a wireless base station antenna, thelower the power output.* In the United States and Canada, the SAR limit for mobilephones used by the public is 1.6 Watts/kilogram (W/kg)averaged over one gram of tissue. The standardincorporates a substantial margin of safety to giveadditional protection for the public and to account for anyvariations in measurements.myX-1a twin PCS_en_15charactech.pmd 25/06/2004, 13:3580
81Technical CharacteristicsBefore a phone model is available for sale to thepublic, it must be tested and certified to the FCC thatit does not exceed the limit established by thegovernment-adopted requirement for safe exposure.The tests are performed in positions and locations(i.e., at the ear and worn on the body) as required bythe FCC for each model.The highest SAR value for these model phones asreported to the FCC when tested for use at the earand when worn on the body are:VersionmyX-1a or myXTa or otherapplicable commercial namemyX-1aw or otherapplicable commercial namemyX-1ag or otherapplicable commercial namemyX-1a twin or otherapplicable commercial namemyX-1aw twin or otherapplicable commercial namemyX-1ag twin or otherapplicable commercial nameFCC IDM9H95A03AM9H95A03AWM9H95A03AGM9H95A03A2M9H95A03AW2M9H95A03AG2GSM 8500.7080.7080.7070.6640.6640.571PCS 19000.4320.4320.4810.4290.4290.587GSM 8500.4720.4720.5050.4880.4880.767PCS 19000.2830.2830.3100.2550.2550.379While there may be differences between the SARlevels of various phones and at various positions, theyall meet the government requirement. The FCC hasgranted an Equipment Authorization for this modelphone with all reported SAR levels evaluated as incompliance with the FCC RF exposure guidelines. SARinformation on this model phone is on file with the FCCand can be found under the Display Grant section ofhttp://www.fcc.gov/oet/fccid after searching on FCC IDrelative to the phone model.SAR at the ear (W/kg) SAR worn of the body(W/kg)myX-1a twin PCS_en_15charactech.pmd 25/06/2004, 13:3581
82TroubleshootingProblem - Situation ActionsThe phone does not turn on Remove the battery and then replace it.orConnect the phone to the charger (check that this isplugged in) for approximately 5 minutes.No network recognised Remove the SIM card. Check that there is no dust orgrit in the SIM slot.  Replace the SIM card being sure topush it right up to the stop point.Calls to a messaging service or voice Check in the Ringing and beeps/Tones menu that theserver do not get through box is ticked.Unable to turn the phone on Charge the phone for 15 minutes before turning it on.Check the battery charging indicator:cycling: charging normallynot cycling: disconnect the charger, re-connect andthen check the battery charging indicator: if it is still notcycling, disconnect the charger and re-connect severaltimes.If the battery is still not charging, contact the after salesservice.When the battery charging indicator is continuously on,the battery is fully charged.Error message: The battery pack is not recognised by the phone.BATTERY STATUS NOT KNOWN Check that the battery pack is correctly fitted in thephone.Error message: LOW BATTERY This message is displayed when the battery charge istoo low. The phone turns off automatically. Charge thephone.myX-1a twin PCS_en_16dépannage.pmd 23/06/2004, 10:5182
83TroubleshootingProblem - Situation ActionsError message: SIM NOT PRESENT Check that the SIM card has been inserted correctly.Examine the SIM card. If it is damaged, contact yourmobile phone operator sales point. If the message isstill displayed, contact the after sales service.Error message: INCORRECT PIN The PIN has been incorrectly entered. If the PIN isentered incorrectly three times, the SIM card isblocked.Error message: SIM BLOCKED The PIN has been incorrectly entered three times. Useyour Personal Unblocking Key (PUK) to unblock theSIM card.Enter:**05*PUK*PIN*PIN#PUK: your PUK code supplied by your mobile phoneoperator.PIN: your PIN code.After 10 (or 5 depending on the type of SIM card)unsuccessful attempts, the SIM card is blockedpermanently. You must then contact your mobile phoneoperator to get a new card.Error message: SIM LOCKED The mobile phone operator may require certain typesof SIM card to be used. This message indicates thatthe SIM card is not accepted.Remove the SIM card and turn the phone on again. Ifyou get the SIM not present error message, check withyour phone dealer whether your SIM card iscompatible. Otherwise, contact the after sales service.myX-1a twin PCS_en_16dépannage.pmd 23/06/2004, 10:5183
84TroubleshootingProblem - Situation ActionsThe phone display does not change Press a key. If nothing is displayed, check the positionof the SIM card. If the problem continues, contact theafter sales service.No connection made Check the form of the number called.Check that there is at least one field strength dotshowing. If R is displayed but there is no mobile phoneoperator name, only emergency calls are allowed.Check that you have not used all your credit with themobile phone operator.Check that the SIM card provides the service yourequired and that it has not expired.Check and, if necessary, disable the outgoing call lock.The network is saturated. Please try later.If you still have problems getting a connection, contactthe Hotline.Unable to receive calls Try to make a call to check that the phone and thenetwork are operational.Check and, if necessary, disable the permanent callredirection (permanent call redirection icon displayed).Check and, if necessary, disable the incoming call lock.If you still have problems receiving calls, contact theHotline.myX-1a twin PCS_en_16dépannage.pmd 23/06/2004, 10:5184
85TroubleshootingProblem - Situation ActionsCannot send messages Check that the SIM card provides this service.Check that the message server is correctly set up.Try to make a call to check that the phone and thenetwork are operational.Try sending the message later.No voice box Check that the SIM card provides this service.Set up the redirection to the voice box using theinformation provided by the mobile phone operator.myX-1a twin PCS_en_16dépannage.pmd 23/06/2004, 10:5185
-myX-1a twin PCS_Notes.pmd 23/06/2004, 10:5186
-myX-1a twin PCS_Notes.pmd 23/06/2004, 10:5187
-myX-1a twin PCS_Notes.pmd 23/06/2004, 10:5188

Navigation menu