Sakar Internation IMW555 INMOTION PORTABLE WIRELESS BLUETOOTH SPEAKER User Manual IMW555 Manual 130723

Download:
Mirror Download [FCC.gov]
Document ID	2083157
Application ID	SSsLTxpkSyuojecmxrQYiQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.28kB (178485 bits)
Date Submitted	2013-09-26 00:00:00
Date Available	2013-09-26 00:00:00
Creation Date	2013-09-26 12:28:50
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2013-09-26 12:29:25
Document Title	Microsoft Word - IMW555 Manual 130723.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Maikou.Zhang

5. Verify that you are connected to the speaker. The Bluetooth ® LED & the
speaker will change to a solid Blue when paring is complete
ALTEC
Model: iMW555
KEY FLOWS
Instruction manual
Status:
1.
Status: “OFF” stage with rechargeable batteries not fully charged
a.
DC Plug in Æ “RED” charging LED turns red steadily.
2.
Status: “OFF” stage with rechargeable batteries FULLY charged
a.
DC Plug in Æ “RED” charging LED flash and then off
EN
PRODUCT OVERVIEW
Press & Hold the
Standby mode
4.
Status: “Standby mode”
a.
Line in plug inÆ Play music immediately
12
b.
Press & Hold
3second : “BLUE” LED flash alternatively, Enter to
Bluetooth pairing mode and connect with your Bluetooth ® devices
c.
Press & Hold
5.
10
11
6.
Power on/off
Bluetooth pairing
Volume down
Volume up
Talk
Aux in port
7.
8.
9.
10.
11.
12.
DC in port
Power output
Status LED indicator
Charging LED light
NFC
Mic
CONTENTS
1.
2.
3.
4.
5.
IWM555.
USB cable
Line-in cable
User Manual
Warranty Card
Press
and then the music volume are going down
Status: Music playing
a.
8.
in 1second Æ enter Bluetooth pairing mode,
Press & Hold the
“BLUE” LED indicator flash
Status: Music playing
a.
7.
in 3second and then turn-off the unit.
Status: “Bluetooth connected”
a.
“RED” LED Light on ( power-on state )
b.
Bluetooth signal disconnected Æ “BLUE” LED slowly flash,Searching
10second and then enter standby if no further signal connected
c.
Line in plug inÆ Music channel change to line in signal when Bluetooth
is pause or not connecting, and resume Bluetooth channel immediately
when line in plug out
d.
1.
2.
3.
4.
5.
6.
3 second and power on the unit and then enter into the
3.
Press
and
then
the
music
volume
are
going
up
Speaker Phone
When phone calling
to enter conference call
a.
Answer a call - Press the
b.
Reject a call - Press Hold ( 3 seconds ) the
to cut the incoming call
When on talking
a.
Press hold( 3 seconds ) the
b.
Press the
to switch between speaker and phone
to hang-up the call
SET UP
1. Plug the IMW555 into an outlet using the included wall charger.
2. The Charging LED light will turn off when it is fully charged. It would take around
2.5 hr for full charge.
Note:
• Please charge the battery at least 3 to 4 hours at the first time.
®
LINE-IN FUNCTION
1. Plug in the line in cable into the right side of the speaker Aux in socket.
2. Connect the other end of the line in cable to your devices headphone socket.
3. Recommend to play the speaker unit at maximum sound level.
PAIRING BLUETOOTH DEVICE
SPECIFICATIONS
1. Pair your Bluetooth ® device to the speaker when you turn on the speaker for
the first time.
2. The speaker pairs with devices that use the Bluetooth ® Hands Free Profile
(HFP) and/or the Advanced Audio Distribution Profile (A2DP). HFP enables
hands-free communication and the A2DP dictates how audio is streamed from
one device to another over a Bluetooth® connection.
3. When you pair devices to the speaker, the devices operate accounting to their
protocols.
Power input:
Total output:
NFC FUNCTION WORK FLOW
1. Please upload NFC- BT Easy to your Android operated smart phone with NFC
function if your android platform is under 4.1 version
2. Please be reminded to turn on your smart phone’s Bluetooth connection
3. Tap your smart phone to NFC sensor region at the left side of speaker. This
refers to “ NFC” wording on left side
4. Then your smart phone will instantly pair with Bluetooth speaker for music
enjoyment
5. To disconnect it, please tab your connected smart phone at NFC sensor region
again
Note:
•
Please ensure your smart phone is equipped with NFC function.
•
To ensure your smart phone got NFC function, please find updated NFC
phone list at below website at http://www.nfcworld.com/nfc-phones-list/
PAIRING MODE AND PAIRING
1. In Press and hold
unit the voice “power is on” and press
to enter the
pairing mode
2. Prepare your Bluetooth ® device (mobile phone or music player) to pair.
3. Select the searching mode on your Bluetooth ® device
4. Your Bluetooth ® device should find “ALTEC IMW555”, select it and pair it
Playtime (via Bluetooth® connect):
Recharging Time:
Dimension:
Audio input
Wireless
Built Battery
Power output
5V, 2A
8W, (4W/Channel)
Passive Radiator
Approximately 8~10 hours
2.5 hours
298X 85 X 87mm
3.5mm Line-in jack, Bluetooth 3.0(A2DP)
Bluetooth 3.0, NFC
3.7V, 2500mAh Li-Polymer battery
5V,500mA
FCC NOTE：
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE
TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID AND
CHANGE ANNTENA WHICH THE MANUFACTURER PROVIDES.
IT IS THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a resi dential installation.
This equipment generates, uses and can radiate radio frequenc y energy and, if not
installed and used in accordance with the in structions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular insta llation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to corr ect the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experien ced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, this equipment should be
installed and operated with a minimum distance of 20cm between the radiator and your
body.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2013:09:26 12:28:50+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2013:09:26 12:29:25+08:00
Metadata Date                   : 2013:09:26 12:29:25+08:00
Format                          : application/pdf
Creator                         : Maikou.Zhang
Title                           : Microsoft Word - IMW555 Manual 130723.doc
Document ID                     : uuid:fbac7e13-ff4c-4212-9287-a16bf1a3cc9a
Instance ID                     : uuid:98910124-aea1-45be-b58d-bd4c5226d8a5
Has XFA                         : No
Page Count                      : 2
Author                          : Maikou.Zhang

EXIF Metadata provided by EXIF.tools