Salto Systems S L AE9W AELEMENT WIRELESS LOCK User Manual

Salto Systems S.L AELEMENT WIRELESS LOCK Users Manual

Users Manual

Installation guide AELEMENT ANSI LOCK220511-ED. 27/09/2012 All contents current at time of publication.SALTO Systems S.L. reserves the right to change availability of anyitem in this catalog, its design, construction, and/or materials.©2011 SALTO Systems S.L.Installation guide AELEMENT1/4t**OutsideExteriorInsideInterior* Only for doors > 2-9/16"thickness*Solo para puertas > 65mm de espesor*Uniquement pour portes > 65 mm d' épaisseur12346710985Only SALTO spindleANSI LockEXTERIOREXTERIEUR INTERIORINTERIEURINSIDEOUTSIDE114-9/16"(116)2-9/16"(65)2-5/8"(67)1-25/32"(45)1"(25.5)19/32"(15)(mm)The mounting with other spindles voids the guaranty.El montaje de otros cuadradillos anula la garantia.Le montage d'autres carrés annulera le garantie.NOTE: Screws and spindles are included in the box of the reader.NOTA:Los tornillos y cuadradillos estan incluidos en la caja del lector.NOTE: Les vis et les carrés sont inclus dans la boite du lecteur.Solo cuadradillos SALTOSeulement carrés SALTOEngFEInstallation guideGuía de instalaciónGuide d'installation*****AE i 0 xxx... series(NO electronic privacy )Recommendation for Customer’s lever set installation on SALTO AElement. See : 4MO01300 Recomendaciones para la instalación de manillas Cliente en SALTO AElement. Ver: 4MO01300 Recommandation pour l’installation des béquilles client sur Salto AElement. Voir: 4MO01300
Installation guide AELEMENT ANSI LOCK220511-ED. 27/09/2012 All contents current at time of publication.SALTO Systems S.L. reserves the right to change availability of anyitem in this catalog, its design, construction, and/or materials.©2011 SALTO Systems S.L. 2/4TEMPLATEOnly SALTO spindleCut Strike, Lock Case123456Mecanizado cerradero, caja cerraduraPLANTILLASolo cuadradillos SALTOSeulement carrés SALTO INSIDEInstallation guide AELEMENTANSI LockOFLEVERLCOFLOCKLCOFSTRIKELCLCINSIDEOUTSIDEINSIDEOFLOCKLC1.625"(41)1.671"(42.45)6-9/16"(166.7)8"(203.2)1,25" - 1.125"(32) -(28.6)1-1/8" (28.6)0,219"(5,5)120,654-3/4" (120.65)5.616"(142.65)O3/8" (O10)O3/8" (O10)O1" (O25)2" (50.8)1,25"(32)3-1/2" (89)4,875" (124)1-1/16" MIN (27)O3/4" (19)INSIDE ONLY2-7/16" (61.9)2.395" (60.85)1.61" (40.9)1.125"(28.5) ø9/16"( ø14) HOLE ONLY INSIDEOFLEVERLCOFLOCKLCINSIDEOUTSIDEINSIDEOFLOCKLCOUTSIDEOFLOCKLC ø9/16 (ø14)AGUJEROSOLO POR EL INTERIOR1-7/16"(36.5)2"(50.8)O9/16"(O14)O9/16"(O14)1/4"(6.35) 2-3/4"(70)8-5/16"(211.1)CUT**CORTEThe groove must be on the same side than the grub screw.La ranura en el lado del prisionero.La rainure doit être du côté de la visEXTERIOREXTERIEUR INTERIORINTERIEURNOTE FOR DRILLING MARKSUSE TEMPLATE ONLY BY INSIDENOTA , PARA MARCAR LOS AGUJEROSUSAR LA PLANTILLA SOLO POR EL INTERIORPOUR MARQUER LES JOINTS DE PERÇAGE,N'UTILISER LE GABARIT QUE DU CÔTÉ INTERIEUR.EngFEINTERIORINTERIEURMetal doorPuerta metalicaPorte metalliqueWood doorPuerta maderaPorte en bois
Installation guide AELEMENT ANSI LOCK220511-ED. 27/09/2012 All contents current at time of publication.SALTO Systems S.L. reserves the right to change availability of anyitem in this catalog, its design, construction, and/or materials.©2011 SALTO Systems S.L.OUTSIDE INSIDEINSIDEOnly LR03BatteriesbaREADER CABLELOCK CABLE3/4Screw driverPZ2Screw driverTorx T10 TAMPER7891011 1213 141 AlignedOUTSIDE & INSIDE2WIRELESS CABLE (OPTIONAL)AlinearEXTERIOR - INTERIORCABLE LECTORCABLE CERRADURA==Installation guide AELEMENTANSI LockFasten with screw to keep it alignedFijar el tornillo para mantener el alineamientoFixer la vis pour assurer l'alignement .EXTERIOREXTERIEUR INTERIORINTERIEURINTERIORINTERIEURAT THIS POINT DO NOTCLOSE THE DOORPROGRAM THE LOCK FIRSTfollow user manualEngNO CIERRE LA PUERTA.PROGRAMAR ANTES LACERRADURATÜRE NICHT SCHLIESSEN.ZUERST SCHLOSSPROGRAMMIERENNE PAS FERMEZ LA PORTEDE PROGRAMMER LASERRUREEDFIPRIMA DI CHIUDERE LA PORTA,PROGRAMMARE LASERRATURAREMOVEQUITARRETIRER
Installation guide AELEMENT ANSI LOCK220511-ED. 27/09/2012 All contents current at time of publication.SALTO Systems S.L. reserves the right to change availability of anyitem in this catalog, its design, construction, and/or materials.©2011 SALTO Systems S.L. 4/4www.saltosystems.com Installation guide AELEMENTANSI Lock Declaración de conformidad Por medio de la presente Salto Systems S.L. (Pol. Lanbarren C/Arkotz, 9 - 20180 Oiartzun – Spain - CIF B20708517), declara que este equipo cumple con losrequisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE o la Directiva 89/336/EEC. Podrá encontrar una copiade la declaración de conformidad original en la siguiente dirección de Internet:http://www.saltosystems.com Todos los modelos de proximidad son “Receiver class 3”. Declaration of conformity By means of the present Salto Systems S.L. (Pol. Lanbarren C/Arkotz, 9 -20180 Oiartzun - Spain - CIF B20708517), declares that this equipment fulfills the essential requirements and any other applicable or indispensable dispositions of the Directive 1999/5/CE or the Directive 89/336/EEC. You will be able to find a copy of the original declaration of conformity at the following Internet address: http://www.saltosystems.com All proximity models are "Receiver class 3". Déclaration de conformité Par le biais de celle-ci, Salto Systems S.L. (Pol. Lanbarren C/Arkotz, 9 - 20180 Oiartzun – Spain - CIF B20708517), déclare être conforme aux normes essentielles et n’importe quelles autres dispositions applicable et exigibles des Directives 1999/5/CE ou 89/336/EEC. Vous pourrez trouver une copie de la déclaration de conformité originale sur le site internet suivant: http://www.saltosystems.com Tous les modèles de proximité sont “Receiver class 3”. KonformitätserklärungHiermit erklärt Salto Systems S.L. (Pol. Lanbarren C/Arkotz, 9 – 20180 Oiartzun – Spanien – UID-Nr. B20708517), dass sich dieses Produkt in Übereinstimmung mit den grundlegenden Anforderungen und den relevanten Vorschriften der Richtline 1999/5/EG bzw. 89/336/EWG befindet. Die Kopie der Konformitätserklärung im Originalwortlaut ist auf folgender Website zu finden: http: http://www.saltosystems.com Alle Proximity-Modelle sind “Receiver class 3”. EEngFD Dichiarazione di conformità Con la presente Salto Systems S.L (Pol.Lanbarren C/Arkotz, 9 – 20180 Oiartzun – Spain – CIF B20708517), dichiara che questa apparecchiatura è conforme ai requisiti essenziali ed a qualsiasi disposizione applicabile o esigibile in riferimento alla direttiva 1999/5/CE e della direttiva 89/336/EEC. È possibile trovare una copia originale della dichiarazione di conformità al seguente indirizzo internet http:/www.saltosystems.com Tutti i modelli di prossimità sono “Receiver Class 3” IEXTERIOREXTERIEUR INTERIORINTERIEURINSIDEOUTSIDE4-9/16"(116)2-9/16"(65)2-5/8"(67)1-25/32"(45)1"(25.5)19/32"(15)EngFEInstallation guideGuía de instalaciónGuide d'installation******* Only for doors > 2-9/16"thickness*Solo para puertas > 65mm de espesor*Uniquement pour portes > 65 mm d' épaisseur12346712985Only SALTO spindleThe mounting with other spindles voids the guaranty.El montaje de otros cuadradillos anula la garantia.Le montage d'autres carrés annulera le garantie.Solo cuadradillos SALTOSeulement carrés SALTO NOTE: Screws and spindles are included in the box of the reader.NOTA:Los tornillos y cuadradillos estan incluidos en la caja del lector.NOTE: Les vis et les carrés sont inclus dans la boite du lecteur.PRIVACY CABLECABLE PRIVACIDADAE i 1 xxx... series(With electronic privacy )ONLY FOR PROXIMITY MODELS This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
ED0 - 221405 FCC Compliance Statements (FCCID: UKCAE9, UKCAE9W, UKCL90, UKCG90, UKCRPOE, UKCNRF, UKCR485, UKCA9XX, UKCA9XW) This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Canadian Compliance Statement (IC: 10088A-AE9, 10088A-AE9W, 10088A-L90, 10088A-G90, 10088A-RPOE, 10088A-NRF, 10088A-R485, 10088A-A9XX, 10088A-A9XW) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. EU Compliance Statement EN Hereby, Salto Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain), declares that this access control equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC (R&TEE). You will be able to find a copy of the original declaration of conformity at the following Internet address: http://www.saltosystems.com/declarations ES Por medio de la presente Salto Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain) declara que este equipo de control de accesos cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE (R&TEE). Podrá encontrar una copia de la declaración de conformidad original en la siguiente dirección de internet: http://www.saltosystems.com/declarations FR Par la présente Salto Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain) déclare que l'appareil access control equipment est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/CE (R&TEE). You will be able to find a copy of the original declaration of conformity at the following Internet address: http://www.saltosystems.com/declarations DE Hiermit erklärt Salto Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain), dass sich das Gerät access control equipment in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG (R&TEE). You will be able to find a copy of the original declaration of conformity at the following Internet address: http://www.saltosystems.com/declarations DU Hierbij verklaart Salto Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain)dat het toestel access control equipment in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG (R&TEE). You will be able to find a copy of the original declaration of conformity at the following Internet address: http://www.saltosystems.com/declarations Mechanical Warnings In order to assure a good performance for the device, Salto recommends to use a certified mortise lock and make sure that it is in good condition. Do not knock the device while mounting, if necessary, loose the trims fixation. Do not bring the device into contact with oil, paints or acids. Do not paint the door with the mortise lock fixed to the door. CLEANING THE ELECTRONIC FURNITURE: You can use a damp cloth from soapy water. Never use abrassive soaps or sprays.It is important to clean stainless steel regularly. Legal Warnings SALTO shall not be liable for any losses, personal damages or claims arising out of, or in connection with t he wrong fitting of the cylinders o r bad programming that can cause blocking of entries and exits i.e. blocking entrance, exit of Injured or people in danger. Do you have the programming keys or management software (not included in this box)? If not, then take note that when the door is closed without having been programmed it will automatically lock, and can only be opened with a Portable Programing Device. If in any doubt, please contact your supplier or visit our Web site: www.saltosystems.com According to the fourth point on the SALTO SYSTEMS LIMITED WARRANTY document, the warranty does not cover product failures due to repair installations, modifications or improper service performed by non-Salto authorised persons. The user is not allowed to disassemble the inner electromechanic structure in the SALTO furniture. (for instance, loosening the torx screws) In the case of a user intended intervention at the inner parts, the user will lose any warranty right from SALTO. Copyright © 2013 SALTO Systems N20371

Navigation menu