Salto Systems S L AE9W AELEMENT WIRELESS LOCK User Manual

Salto Systems S.L AELEMENT WIRELESS LOCK Users Manual

Users Manual

Download: Salto Systems S L AE9W AELEMENT WIRELESS LOCK User Manual
Mirror Download [FCC.gov]Salto Systems S L AE9W AELEMENT WIRELESS LOCK User Manual
Document ID2331465
Application IDIhwEpg9CUI/Z41B2j8IKHA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize61.48kB (768498 bits)
Date Submitted2014-07-21 00:00:00
Date Available2014-07-21 00:00:00
Creation Date2014-07-21 09:54:38
Producing SoftwareAdobe Acrobat 10.1.10
Document Lastmod2014-07-21 09:54:38
Document TitleUsers Manual
Document CreatorAdobe Acrobat 10.1.10
Document Author: a.petrikorena

Installation guide AELEMENT
ANSI Lock
Eng
AE i 0 xxx... series
(NO electronic privacy )
Installation guide
Guía de instalación
Guide d'installation
1"
(25.5)
1-25/32"
(45)
2-9/16"
(65)
4-9/16"
(116)
2-5/8"
(67)
19/32"
(15)
*****
OUTSIDE
INSIDE
EXTERIOR
EXTERIEUR
INTERIOR
INTERIEUR
* Only for doors > 2-9/16" thickness
*Solo para puertas > 65mm de espesor
*Uniquement pour portes > 65 mm d' épaisseur
10
Only SALTO spindle
Solo cuadradillos SALTO
Seulement carrés SALTO
The mounting with other spindles voids the guaranty.
El montaje de otros cuadradillos anula la garantia.
Le montage d'autres carrés annulera le garantie.
11
Ou
Ex tside
ter
ior
t*
In
Int side
eri
or
(mm)
NOTE: Screws and spindles are included in the box of the reader.
NOTA:Los tornillos y cuadradillos estan incluidos en la caja del lector.
NOTE: Les vis et les carrés sont inclus dans la boite du lecteur.
220511-ED. 27/09/2012 Installation guide AELEMENT ANSI LOCK
Recommendation for Customer’s lever set installation on SALTO AElement.
See : 4MO01300
Recomendaciones para la instalación de manillas Cliente en SALTO AElement.
Ver: 4MO01300
Recommandation pour l’installation des béquilles client sur Salto AElement.
Voir: 4MO01300
© 2011 SALTO Syst ems S.L.
1/4
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
Installation guide AELEMENT
ANSI Lock
9 LY
" ON
3/4 IDE
O S
IN
O3/8
(O10 "
O1 25)
(O
INSIDE
1-1/16" MIN
(27)
3-1/2"
(89)
4,875"
(124)
OF
STRIKE
1-1/8"
(28.6)
C OF
LOCK
OF
LEVER
OF
LOCK
1.625"
(41)
2"
(50.8)
2.395"
(60.85)
1.61"
(40.9)
O3
(O1 /8"
0)
1.671"
(42.45)
5.616"
(142.65)
8"
(203.2)
6-9/16"
(166.7)
1,25"
(32)
0,219"
(5,5)
INSIDE
OUTSIDE
4-3/4" 120,65
(120.65)
1.125"
(28.5)
1,25" - 1.125"
(32) -(28.6)
2-7/16"
(61.9)
Cut Strike, Lock Case
Mecanizado cerradero, caja cerradura
1-7/16"
(36.5)
1/4"
(6.35)
OUTSIDE
/16
O9 14)
(O
16"
O9/ 14)
(O
2-3/4"
(70)
8-5/16"
(211.1)
2"
(50.8)
INSIDE
ø9/16"( ø14) HOLE
ONLY INSIDE
ø9/16 (ø14)AGUJERO
SOLO POR EL INTERIOR
OF
LOCK
OF
LOCK
OF
LEVER
OF
LOCK
OUTSIDE
EXTERIOR
EXTERIEUR
TEMPLATE
INSIDE
PLANTILLA
INTERIOR
INTERIEUR
Eng NOTE FOR D RILLING MA RKS
USE TEMPLATE ONLY BY INSIDE
NOTA , PARA MARCAR LOS AGUJEROS
USAR LA PLANTILLA SOLO POR EL INTERIOR
F POUR MARQUER LES JOINTS DE PERÇAGE,
N'UTILISER LE GABARIT QUE DU CÔTÉ INTERIEUR.
The groove must be on the same side than the grub screw.
La ranura en el lado del prisionero.
La rainure doit être du côté de la vis
Metal door
Wood door
Puerta metalica Puerta madera
Porte metallique Porte en bois
Only SALTO spindle
Solo cuadradillos SALTO
Seulement carrés SALTO
CUT
* CORTE
INSIDE
INTERIOR
INTERIEUR
220511-ED. 27/09/2012 Installation guide AELEMENT ANSI LOCK
© 2011 SALTO Syst ems S.L.
2/4
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
Installation guide AELEMENT
ANSI Lock
REMOVE
QUITAR
RETIRER
INSIDE
OUTSIDE
INTERIOR
INTERIEUR
10
INSIDE
EXTERIOR
EXTERIEUR
INTERIOR
INTERIEUR
Aligned
OUTSIDE & INSIDE
Screw driver
PZ2
12
11
Alinear
EXTERIOR - INTERIOR
READER CABLE
CABLE LECTOR
Only LR03
Batteries
WIRELESS CABLE
(OPTIONAL)
Fasten with screw to keep it aligned
Fijar el tornillo para mantener el alineamiento
Fixer la vis pour assurer l'alignement .
AT THIS PO INT DO NOT
CLOSE THE DOO R
PROGRAM THE L OCK FIRST
NO CIERRE L A PUERTA.
PROGRAMAR ANTES LA
CERRADURA
TÜRE NICHT S CHLIESSEN.
ZUERST SCHLOSS
PROGRAMMIEREN
NE PAS FERMEZ LA P ORTE
DE PROGRAMMER L A
SERRURE
LOCK CABLE
PRIMA DI CHIUDERE LA P ORTA,
PROGRAMMARE LA
SERRATURA
follow user manual
CABLE CERRADURA
13
Eng
14
Screw driver
Torx T10 TAMPER
220511-ED. 27/09/2012 Installation guide AELEMENT ANSI LOCK
© 2011 SALTO Syst ems S.L.
3/4
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
Installation guide AELEMENT
ANSI Lock
AE i 1 xxx... series
(With electronic privacy )
Installation guide
Guía de instalación
Guide d'installation
1"
(25.5)
1-25/32"
(45)
2-9/16"
(65)
2-5/8"
(67)
19/32"
(15)
4-9/16"
(116)
Eng
*****
* Only for doors > 2-9/16" thickness
*Solo para puertas > 65mm de espesor
*Uniquement pour portes > 65 mm d' épaisseur
OUTSIDE
INSIDE
EXTERIOR
EXTERIEUR
INTERIOR
INTERIEUR
12
PRIVACY CABLE
CABLE PRIVACIDAD
Only SALTO spindle
Solo cuadradillos SALTO
Seulement carrés SALTO
The mounting with other spindles voids the guaranty.
El montaje de otros cuadradillos anula la garantia.
Le montage d'autres carrés annulera le garantie.
Eng
Declaration of conformity
By means of the present Salto Systems S.L. (Pol. Lanbarren C/Arkotz, 9 20180 Oiartzun - Spain - CIF B20708517), declares that this equipment fulfills
the essential requirements and any other applicable or indispensable
dispositions of the Directive 1999/5/CE or the Directive 89/336/EEC. You will be
able to find a copy of the original declaration of conformity at the following
Internet address: http://www.saltosystems.com
Declaración de conformidad
Por medio de la presente Salto Systems S.L. (Pol. Lanbarren C/Arkotz, 9 - 20180
Oiartzun – Spain - CIF B20708517), declara que este equipo cumple con los
requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles
de la Directiva 1999/5/CE o la Directiva 89/336/EEC. Podrá encontrar una copia
de la declaración de conformidad original en la siguiente dirección de Internet:
http://www.saltosystems.com
Konformitätserklärung
Hiermit erklärt Salto Systems S.L. (Pol. Lanbarren C/Arkotz, 9 – 20180 Oiartzun
– Spanien – UID-Nr. B20708517), dass sich dieses Produkt in
Übereinstimmung mit den grundlegenden Anforderungen und den relevanten
Vorschriften der Richtline 1999/5/EG bzw. 89/336/EWG befindet. Die Kopie der
Konformitätserklärung im Originalwortlaut ist auf folgender Website zu finden:
http: http://www.saltosystems.com
Alle Proximity-Modelle sind “Receiver class 3”.
All proximity models are "Receiver class 3".
NOTE: Screws and spindles are included in the box of the reader.
NOTA:Los tornillos y cuadradillos estan incluidos en la caja del lector.
NOTE: Les vis et les carrés sont inclus dans la boite du lecteur.
Dichiarazione di conformità
Con la presente Salto Systems S.L (Pol.Lanbarren C/Arkotz, 9 – 20180
Oiartzun – Spain – CIF B20708517), dichiara che questa apparecchiatura è
conforme ai
requisiti essenziali ed a qualsiasi disposizione applicabile o esigibile in riferimento
alla direttiva 1999/5/CE e della direttiva 89/336/EEC. È possibile trovare una copia
originale della dichiarazione di conformità al seguente indirizzo internet
http:/www.saltosystems.com
Tutti i modelli di prossimità sono “Receiver Class 3”
Todos los modelos de proximidad son “Receiver class 3”.
Déclaration de conformité
Par le biais de celle-ci, Salto Systems S.L. (Pol. Lanbarren C/Arkotz, 9 - 20180
Oiartzun – Spain - CIF B20708517), déclare être conforme aux normes essentielles et
n’importe quelles autres dispositions applicable et exigibles des Directives 1999/5/CE
ou 89/336/EEC. Vous pourrez trouver une copie de la déclaration de conformité
originale sur le site internet suivant: http://www.saltosystems.com
Tous les modèles de proximité sont “Receiver class 3”.
220511-ED. 27/09/2012 Installation guide AELEMENT ANSI LOCK
ONLY FOR PROXIMITY MODELS
This device complies with Part 15 of the FCC Rules and with Industry
Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may
cause undesired operation. Changes or modifications not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
© 2011 SALTO Syst ems S.L.
www.saltosystems.com
4/4
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
FCC Compliance Statements
(FCCID: UKCAE9, UKCAE9W, UKCL90, UKCG90, UKCRPOE, UKCNRF, UKCR485, UKCA9XX, UKCA9XW)
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Canadian Compliance Statement
(IC: 10088A-AE9, 10088A-AE9W, 10088A-L90, 10088A-G90, 10088A-RPOE, 10088A-NRF, 10088A-R485, 10088A-A9XX, 10088A-A9XW)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
EU Compliance Statement
EN
Hereby, Salto Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain), declares that this access control equipment is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC (R&TEE). You will be able to find a copy of the original declaration of conformity at the following Internet address:
http://www.saltosystems.com/declarations
ES
Por medio de la presente Salto Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain) declara que este equipo de control de accesos cumple con los requisitos
esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE (R&TEE). Podrá encontrar una copia de la declaración de conformidad original en la
siguiente dirección de internet: http://www.saltosystems.com/declarations
FR
Par la présente Salto Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain) déclare que l'appareil access control equipment est conforme aux exigences
essentielles et aux autres dispositions pertinentes de la Directive 1999/5/CE (R&TEE). You will be able to find a copy of the original declaration of conformity at the following Internet
address: http://www.saltosystems.com/declarations
DE
Hiermit erklärt Salto Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain), dass sich das Gerät access control equipment in Übereinstimmung mit den
grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG (R&TEE). You will be able to find a copy of the original declaration of conformity
at the following Internet address: http://www.saltosystems.com/declarations
DU
Hierbij verklaart Salto Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain)dat het toestel access control equipment in overeenstemming is met de essentiële eisen
en de andere relevante bepalingen van richtlijn 1999/5/EG (R&TEE). You will be able to find a copy of the original declaration of conformity at the following Internet address:
http://www.saltosystems.com/declarations
Mechanical Warnings
In order to assure a good performance for the device, Salto recommends to use a certified mortise lock and make sure that it is in good condition. Do not knock the device while mounting, if
necessary, loose the trims fixation. Do not bring the device into contact with oil, paints or acids. Do not paint the door with the mortise lock fixed to the door.
CLEANING THE ELECTRONIC FURNITURE: You can use a damp cloth from soapy water. Never use abrassive soaps or sprays.It is important to clean stainless steel regularly.
Legal Warnings
SALTO shall not be liable for any losses, personal damages or claims arising out of, or in connection with t he wrong fitting of the cylinders o r bad programming that can cause blocking of entries
and exits i.e. blocking entrance, exit of Injured or people in danger.
Do you have the programming keys or management software (not included in this box)? If not, then take note that when the door is closed without having been programmed it will automatically lock,
and can only be opened with a Portable Programing Device. If in any doubt, please contact your supplier or visit our Web site: www.saltosystems.com
According to the fourth point on the SALTO SYSTEMS LIMITED WARRANTY document, the warranty does not cover product failures due to repair installations, modifications or improper service
performed by non-Salto authorised persons. The user is not allowed to disassemble the inner electromechanic structure in the SALTO furniture. (for instance, loosening the torx screws) In the case
of a user intended intervention at the inner parts, the user will lose any warranty right from SALTO.
N20371
Copyright © 2013 SALTO Systems
ED0 - 221405

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : a.petrikorena
Create Date                     : 2014:07:21 09:54:38-07:00
Modify Date                     : 2014:07:21 09:54:38-07:00
Title                           : 
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2014:07:21 09:54:38-07:00
Creator Tool                    : Adobe Acrobat 10.1.10
Format                          : application/pdf
Creator                         : a.petrikorena
Document ID                     : uuid:b6eae1e5-fc00-4d11-a115-f011b861f5ca
Instance ID                     : uuid:dca7cc41-b5ac-4c3b-be64-850411757951
Producer                        : Adobe Acrobat 10.1.10
Page Count                      : 5
EXIF Metadata provided by EXIF.tools
FCC ID Filing: UKCAE9W

Navigation menu