Salutron HRS01 BLE/5kHz Heart Rate Monitor, Molded Chest Strap (Hard), Uncoded User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1766678
Application ID	8HWsGs12f9jPL9CHUnwriA==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.27kB (190865 bits)
Date Submitted	2012-08-15 00:00:00
Date Available	2012-08-15 00:00:00
Creation Date	2012-07-25 17:38:39
Producing Software	Adobe PDF Library 8.0
Document Lastmod	2012-07-25 17:38:40
Document Title	user manual
Document Creator	Adobe InDesign CS3 (5.0.4)

Combo Heart Rate Strap
Bluetooth® Smart & 5 kHz Transmission
USER MANUAL
Your Combo Heart Rate Strap offers a comfortable
fit and wireless connectivity to receiving devices
like cardio equipment and smartphones.
The Bluetooth® Smart transmission technology
connects with smartphones and other Bluetooth
Smart Ready (Bluetooth 4.0) devices. Your heart
rate will be transmitted directly from the strap to
the phone when the Combo HR Strap is worn.
The Combo HR Strap also transmits heart rate
data using the standard 5 kHz signal that is
compatible with most cardio equipment. The
5 kHz heart rate signal is also transmitted when
the strap is worn.
Combo HR Strap Components
1. The electrode sensors read your heart rate
signal.
2. The heart rate transmitter sends your heart
rate signal to the receiving device.
Combo Heart Rate Strap
FRONT
Strap
Transmitter
Adjustment
Strap
BACK
Electrode
Electrode
Wearing Your Combo HR Strap
1. Moisten the electrode sensors with water.
BACK
Electrode
Electrode
2. Unhook and secure the strap around your
chest just below your chest muscles.
Wearing Your Heart Rate Strap
3. Adjust the strap for a snug yet comfortable fit.
4. Make sure the electrode sensors are firmly
against your skin and the logo on the
transmitter is facing out and upright.
FRONT (logo facing out and upright)
Pairing Your Combo HR Strap
Your Combo HR Strap will work with compatible
watches and cardio equipment using 5 kHz
transmission. No pairing is required for
5 kHz transmissions.
Your Combo HR Strap is also compatible with
Bluetooth Smart Ready (Bluetooth 4.0) receiving
devices such as a smartphone with a Bluetooth
Smart compatible app installed.
If using a receiving device such as a smartphone,
you will need to pair it with your Combo HR Strap
upon first use. Please refer to your app or phone
manual for instructions on how to operate its
Bluetooth capabilities.
Care & Maintenance
Transmitter: After each use, remove the
transmitter from the strap and towel dry. Clean
with mild soap and water whenever needed. Do
not use alcohol or abrasive material to clean.
Strap: After each use, rinse with water and hang
dry. Clean with mild soap and water whenever
needed. Do not iron or dry clean the strap.
! Do not bend the electrode sensors sharply.
! Do not use a washing machine or dryer to
clean your transmitter or strap.
! Do not store when the electrode sensors
are wet. If wet, the Combo HR Strap can be
activated and lead to shorter battery life.
Replacing the Battery
Your Combo HR Strap uses one (1) standard
lithium battery: CR2032
1. On the back side of the transmitter, insert a
coin into the slot of the battery cover and turn
counterclockwise to open.
2. Insert a new battery with the positive (+)
side facing up against the battery cover.
Make sure the rubber seal ring is in place to
ensure water resistance.
3. Relace the battery cover and use the coin to
turn it clockwise to close.
Water Resistant
Your Combo HR Strap is water resistant. However,
heart rate readings will not be read if submerged
in water (e.g., swimming).
Specifications
Water resistance: 1 ATM
Operating temperature: 23°F - 122°F
(-5°C - 50°C)
Radio frequency: 2.4 GHz BLE/Bluetooth smart
protocol
Wireless compatibility: 5 kHz transmission;
Bluetooth Smart Ready (Bluetooth 4.0)
smartphones
Compliance
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located
or operating in conjunction with any other antenna or
transmitter.
FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate this equipment
IC: This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe Best conforme à la
norme NMB-003 du Canada.
This device complies with Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
DECLARATION DE CONFORMITE D’INDUSTRIE CANADA
Ce périphérique a été testé et reconnu conforme auxlimites
spécifiées dans RSS-210.
Son utilisation est soumise aux deux conditions suivantes:
(1) il ne doit pas provoquer d’interférences gênantes et
(2) il doit tolérer les interférences re.ues, notamment
cellessusceptibles d’en perturber le fonctionnement.
10


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.1-c037 46.282696, Mon Apr 02 2007 18:36:42
Instance ID                     : uuid:1a1c9811-528d-4659-96e6-d9be45cd88a1
Document ID                     : adobe:docid:indd:741ba28c-d67c-11e1-b5c5-baf9f0eed4cd
Rendition Class                 : proof:pdf
Derived From Instance ID        : 4610a179-d5c9-11e1-a84c-d4ee6a979479
Derived From Document ID        : adobe:docid:indd:4610a172-d5c9-11e1-a84c-d4ee6a979479
Create Date                     : 2012:07:25 17:38:39-07:00
Modify Date                     : 2012:07:25 17:38:40-07:00
Metadata Date                   : 2012:07:25 17:38:40-07:00
Creator Tool                    : Adobe InDesign CS3 (5.0.4)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 8357 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Count                      : 12
Creator                         : Adobe InDesign CS3 (5.0.4)

EXIF Metadata provided by EXIF.tools