Samson Electronics BPS-8 ACTIVE SPEAKER User Manual

Samson Electronics Inc. ACTIVE SPEAKER

User manual

       Model:  BPS-8           User Manual                     ENGLISH
Safety Precautions   Fitting and installation of this speaker cabinet must be carried out by qualified personnel following the approved safety standards.   Do not attempt to clean the plastic enclosure with solvents or petrochemical based cleaners.  Do not place objects which are sources of heat on the speaker cabinet such as lighting equipment or smoke machines.   Do not expose the speaker cabinet to direct rain or stand in water. Liquid getting into the box will risk a short circuit and will be hazardous.   Do not stack the speaker cabinet in a manner that could cause injury should a cabinet become dislodge.     Additional precautions    forAuto-amplified devices of the series.      Before installation, ensure that the voltage and frequency of power outlet match the power requirements of the loudspeaker.   Disconnect from main power before to make connections in the loudspeaker.   Make sure that the power-cord is never crimped or damaged by sharp edges. Never let the power-cord come into contact with other cables. Only handle the power-cord by the plug.   In case to replace the fuse, it must be changed by identical rate and dimensions.    Attention   Before connecting or operating your new loudspeaker, please study the accompanying instruction manual paying special attention to the operating precautions and wiring procedure.      This symbol on the product or on Its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical an electronic equipment  By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product  The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased  the product.      User Manual Pag.  1
  User Manual Pag.  2
Functions 1. USB Player       2. Master volume: it controls all the volume. 3. Power switch 4. USB/TF card input 5. Aux input 6. Treble: to control the tone level of high frequency at range -12dB to +12dB 7. MIC priority button 8. Bass: to control the tone level of low frequency at range -12dB to +12dB 9. MIC volume: it controls the volume of Microphone 10.  Adapter charging  11.  ECHO controller 12.  6.35 jack for MIC input 13.  12V power supply 14.  Led light charging indication 15.  Antenna: to strengthen radio signal                       User Manual Pag.  3 MODE  Exchange between USB / TF / FM / BT  Play/Pause     Last     Next RECORD  Record acoustical signal into TF card
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modification warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between thee quipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.  * RF warning: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Navigation menu