Samsung Electro Mechanics DSR2800 Digital Satellite Receiver User Manual manual 3 of 4

Download:
Mirror Download [FCC.gov]
Document ID	149633
Application ID	u6gr0JWOHy9YVn5/xvRm+g==
Document Description	manual 3 of 4
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	85.51kB (1068823 bits)
Date Submitted	2001-05-14 00:00:00
Date Available	2001-05-09 00:00:00
Creation Date	2001-04-30 19:41:57
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-04-30 20:01:11
Document Title	manual 3 of 4
Document Creator	Microsoft Word 9.0
Document Author:	°øÀ¯pc

By pressing the FAV button of your remote control during normal viewing you can see all channel lists. And
press FAV button again you will see favorite channel lists,
D3-4) Power‘up Channel
When your Receiver is switched on the channel wluch you have stored as the power up channel
appears automatically. You can choose any channel you like Again use the cursor (A and V) and
the OK button,
hzmnel
4 Last viewed Channel )
lv Last viewed channel returns to the last channel
which was Viewed before switching off
Pow eru - Channel
' Selecwblc Camel >
Z Selectable Channel enables you to choose
the channel which appears when you switch
on.
Use ‘VlEW’ key to go to channel selection
area.
D4) System Setup
MENU <9 Main menu appear' 5
S stem Info.
System Setup «9 System Setup menu awed!“ Facto default
—
D4—l) TV type
Your Rweiver is set by default for a standard TV set This setting
therefore only has to be changed if you want to connect the DSR 2800
C11 to a wide screen. Entering the wrong set type may afiect picture
quality.
TV menu: standard =3:4, “fidc = 16:9
Video menu : the Video mode' setting which must be changed
according to your TV system (PAL, NTCS, PAL/NT CS).
D4—2) Local Time
Inthis system, GM is programd as standard. It'you are in
Tune ad uslmem
another time zone, go to the time zone you want using the
1 > buttons (cursor) and press ‘SELECT’.
~ If you have any other questions, please contact your
nearest DSR2800 C/I duller.
SAMSUNG CI VI 00
D4-3) System Info‘ '
To see the system diagnostic, This menu shows your
system’s information.
PC Card 5 stem
PC Card Version
D4—4 Facto default Please Enter PIN Do you want to set
) ry Code Factory default setting?
To set factory default setting Yes / No
Afier putting PIN code, If you really
wam factory default setting select ‘Yes’ menu,
Channel Installation
Scan Satellite
Scan Trans - mder
Delete all Channel
D5) Channel Installation
MENU <> Main menu appears Cfldfl
Channel Installation <€>Afier PIN code
checldng, Channel Installation menu appears
Please Enter PIN
LNB setuv
U-- to Sarlnfo,
Aiming Antenna
DS- 1) Scan Satellite
One satellite have many transponder.
And each transponder has many
Channel data. This DSRZBOO CA has
basic satellite/transponder information
If you want to add another satellite /
transponder, See D5-5) section
In this menu, All Channel data in
selected Satellite will be caught up.
First, Select 3 Satellite
Second, confirm LNB. (For detail see
D5-4) section)
Third, Start SCAN. And then system
will scan all transponder. At this time
the processing bar visualize the processing.
SATELLITE < 22/23 AsiaZ t
SCAN
EDIT
3713 Hor 4.420 3/4 U. - ted Channel
Status Processing
[n Edit menu, you can edit the data of transponder
Usmg - v key to select
Transponder, and press ‘SELECT'
button
And you can change the data
(ex. Freq. IPoV SR and so on.)
SATzAsiaZ
‘l'P ( 01/32]ESPN>
0] 700 GHz
Polan‘
SmbolRate 27500
FE
Netsearc _
—
SATELLITE
”5‘2’ 5°“ T’”““"’""”
This menu is similar to DS-l) section
But one thing is dilferent
In this menu you can scan only one
C43mm
transponder which is paniculary 4000 H mm 3/4 U. - ted Channel
Slams Processing
selected,
After selecting the Satellite and trans»
ponder.
SCAN ' Only one transpondcr’s data
will be scaned
Edit : The same to D5»l)sectton,
Edi! : The same to D5-l)sac1ion.
PID : There are two formal of data to scan the ‘ Deermal(10 base) '
theo PID 0000
satellite v One is Fraquolan'ty/Symbol Audio PH) 0000
Rale/FEC data. Another is PID Data PED PCR PlD
data is composed of Video/Audio/PCR PlD, I Upda‘e ”D Se‘ AUTO -
—
In this menu, you can scan the satellite by
PLD data
DS-3) Delete all Channel
Do you want to delete
To delete all channels that 15 stored in the system, all channels?
select ‘YES’ Yes / N0
D5-4) LNB setup
DrSEqC 1 ‘I‘lus function 15 only Important 11‘ you DIS C
TONE BURST -E-
have to control a multiswitchi In this case the LNB POWER “
DiSEqC option must be ON.
- Ask your dealer about this
TONE BURST : ZZKHz On and OF option
When DiSEqC option is ON, It must be set ON.
LNB POWER ' You can switch the LNB power supply ON and OFF.
LNB : When using only one antenna, here you can edit LNB frequency.
DS-S) Update Sat. Info
In this menu you can add new Satellite and transponder data
-——
mum—
__
Add : Add new Satellne/l‘mwspondex,
Delete : Delete selected satellite/Transponder
Ed.“ : Edit new Satellite/Transponder
D5-6) Aiming Antenna
In this menu you can sec the sngnal
—_
m—
strenth and signal quality.
Select a network and ally the antenna
until you reach the highest P05Sible Signal sumglh
signal strength.
Signal quality
—: s-SEW“
D6) Common Interface

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2001:04:30 20:01:11+09:00
Author                          : °øÀ¯pc
Create Date                     : 2001:04:30 19:41:57
Creator                         : Microsoft Word 9.0
Page Count                      : 5
Page Mode                       : UseNone

EXIF Metadata provided by EXIF.tools