Samsung Electro Mechanics ESL-BP102 Gen3 Gateway User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2450577
Application ID	kep9DD+iwNC7nF4HusYvHw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	78.65kB (983127 bits)
Date Submitted	2014-11-21 00:00:00
Date Available	2015-05-19 00:00:00
Creation Date	2014-11-10 16:43:59
Producing Software	Adobe Acrobat Pro 11.0.0
Document Lastmod	2014-11-18 17:50:02
Document Title	User manual
Document Creator	Adobe Acrobat Pro 11.0.0
Document Author:	Administrator

Samsung Electro-Mechanics
ESEL User Manual
(SLG-BP102)
Document Summary
Author: WS3 G,
CDS Division,
Samsung Electro-Mechanics
Distributor: Samsung Electro-Mechanics
Tel.: 031-300-4913
www.sem.samsung.com
Editor Information
- Tel.: +82-31-300-4913
- Address: 314, Maetan3-Dong, Yeongtong-Gu, Suwon, Gyunggi-Do, Korea 443-743
Copyright Notification
Samsung Electro-Mechanics Co., Ltd.
Copyright @2009 SEMCO INC.
All trademarks used are properties of their respective owners.
The content of this document is subject to change without prior notice.
The content of this document is intellectual property of Samsung Electro-Mechanics.
This document may not be reproduced or published without prior consent from Samsung Electro-Mechanics.
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© 2008, SEMCO INC.
All rights reserved.
Revision History
Rev.
1.0
Date
22.04.2014
Remark
First Edition.
Contents
1. Precautions .............................................................................................................................. 5
2. Overview ................................................................................................................................... 6
3. Product Specifications ...................................................................................................... 7
3.1 General Specifications ..................................................................... 7
3.1.1 Gateway
3.2 RF Specifications.............................................................................. 8
3.2.1 Gateway
4. Product Description ........................................................................................................... 9
4.1 Exteior............................................................................................... 9
4.1.1 Gateway
5. Product Installation.......................................................................................................... 10
5.1 Gateway ....................................................................................... 10
1. Precautions
“This RF device operates on the 2.4GHz frequency band and can produce radio
interference. The device, therefore, may not be used for applications where safety of human
lives is concerned.”
1) Usage Environment
Take extra caution when using this RF device in the vicinity of other electronic devices and
appliances. Most electronic devices and appliances use electromagnetic waves. Electromagnetic
waves emitted by this RF device can affect other electronic devices and appliances.
If using the device in an explosion hazard area, follow all safety regulations, instructions, and
signals.
2) Storage and Use
Moisture and liquids can damage internal parts and circuit boards if allowed to enter into the device
itself.
Do not place or store the product on a sloped surface. The product may slide and fall off the surface
and damage.
Use the product in temperatures ranging from 0℃ to +60℃. Parts and circuits may damage if
used or stored under temperature extremes.
Avoid areas with strong magnetism or subject to magnetism.
Contact between the device and a magnetic object can lead to malfunctions.
Do not place the product near heat-producing kitchen appliances like a stove or a microwave or
in the vicinity of highly pressurized containers.
External impact to the product, such as from being dropped, can damage the screen.
Twisting and bending the product can damage the exterior casing and the internal components.
2. Overview
Gateway make up a system the electronically displays price and other product information that
are traditionally shown printed or written on paper in places like the supermarket.
Here, S-Label Gateway receives product price updates from the server and uploads the new
data to the applicable electronic tags (S-Label Tag), changing the displayed price information.
 S-Label System
3. Product Specifications
3.1 General Specifications
3.1.1. Gateway
General
Ethernet (10/100Mbps)
Communication
Zigbee RF(based on IEEE 802.15.4)
Dimension (W*H*D)
215 * 215 * 44 (mm)
Weight (g)
1,385g
Enclosure
Plastic (ABS)
Power
DC Adaptor(5V,2A) or PoE (Power over Ethernet(IEEE802.3af))
Caution : DC Power Supply or PoE(Power over Ethernet) using one
3. 2 RF Specifications
3.2.1 Gateway
Category
Specification
Note
Antenna Type
Internal Antenna
2ea
Transmit Frequency
2405MHz ~ 2480MHz
Receive Frequency
2405MHz ~ 2480MHz
Antenna gain
SAC0 : 0.99dBi
SAC3 : 1.57dBi
Modulation
O-QPSK
Channels
16ch
Power
█ DC Adapter (5V, 2A)
█ PoE (Power over Ethernet (IEEE802.3af))
1) Input Voltage Range :36~57VDC
2) Nominal Input Voltage : 48VDC
2) Output Voltage : 5VDC±3%
4. Product Description
4-1 Exterior
4.1.1 Gateway
Status LED


5. Product Installation
5-1 Gateway
- Components (includes installation accessories – adapter, bracket, screws)
Installation
1) Mounting Plate
2) Drilling hole
Plate
for ADT,LAN cable
Gypsum
board
3) Attach Bracket#2
Bracket#2
5) Sliding Gateway
Screw (4ea)
4) Screw
a) Drill 4 holes on the wall or ceiling to align with mounting Plates (1). Refer to the attached
diagram.
b) Drill two Ф10 holes on the wall or ceiling for SMPS Adapter and Ethernet Cable.(2) Refer to
the attached diagram.
c) Align the mounting bracket#2 holes to the holes drilled through the wall or ceiling from step a)
and temporarily secure the bracket in place. (3)
d) Use Screws to completely secure the mounting bracket and Wall or Ceiling. (4)
e) Sliding gateway to mounting bracket#2 (5)
10
f) SMPS Adapter and Ethernet Cable through the two Ф10 holes made from step b).
Operation Check
5) SIL
4) Wakeup
3) DATA
2) Ethernet
1) POWER
< Connect Ethernet Cable with PoE or Connect SMPS adapter and Ethernet cable first . >
1) Power : Always ON after connecting to Ethernet Cable with PoE or SMPS adapter
2) Ethernet : ON if Ethernet link is connected
- Check every 1sec whether Ethernet link is connected.
3) Data : ON when data duration
4) Wakeup : ON when Wakeup duration
11
5) SIL : Blink (duration 1sec) if Server interface layer is operated.
- Check operation of Server interface layer
.Installation
a) Map product information and tag IDs.
Each tag has a unique 1) MAC Address that serves as the tag’s ID.
Map 1) MAC Addresses of the tags and 2) barcodes of the products.
Using a PDA featuring Win CE 5.0 or higher as the operating system and a barcode scanner,
scan the tag’s 1) MAC Address and then the product’s barcode to map.
(1) MAC Address
(2)
Product
Barcode
(3) Industrial PDA
12
b) Register product and tag mapping information.
Using the PDA’s WLAN feature, register mapping data with the 4) Server.
(4) Server
c) Attach a back rail to the shelf (secure using double-sided tape or screws).
d) Attach end and middle caps to the middle rail.
e) Take a tag that has been mapped from step a) and insert to the middle rail from step d). Here,
make sure to align the tag and the rail grooves properly.
f) Slide in the middle rail to the fixed back rail.
g) Products information on Tags such as price will be updated from the server regularly via
gateway
13
WARNING : This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, Including interference that may cause undesired operation.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications, However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution
This device complies with FCC radiation exposure limits for an uncontrolled environment.
Avoid operating this device at a distance less than 20cm from the user.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2014:11:10 16:43:59+09:00
Modify Date                     : 2014:11:18 17:50:02+09:00
Title                           : 
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2014:11:18 17:50:02+09:00
Creator Tool                    : Adobe Acrobat Pro 11.0.0
Format                          : application/pdf
Creator                         : Administrator
Document ID                     : uuid:584c430f-7472-4d66-a718-532b3eab1193
Instance ID                     : uuid:abd213fb-1d62-4ea4-8ceb-f943f59a6503
Producer                        : Adobe Acrobat Pro 11.0.0
Page Count                      : 14

EXIF Metadata provided by EXIF.tools