Samsung Electro Mechanics ST-GM6000N ESL Graphic TAG User Manual

Samsung Electro Mechanics ESL Graphic TAG Users Manual

Users Manual

S-TAG Datasheet(ST-GM6000N) Preliminary REV 0.1 Samsung Electro-Mechanics Proprietary and Confidential 1/14 CUSTOMER APPROVAL SHEET Company Name MODEL ST-GM6000N CUSTOMER APPROVAL □ APPROVAL FOR SPECIFICATIONS ONLY (Spec. Ver. 0.1) □ CUSTOMER REMARK : Issued By Checked By Approved By ES Kim DS Yoon JG Ryu Samsung Electro-Mechanics 314, Maetan3-Dong, YoungTong-Gu, Suwon, Gyunggi-Do, Korea Tel : 82-31-210-5114
S-TAG Datasheet(ST-GM6000N) Preliminary REV 0.1 Samsung Electro-Mechanics Proprietary and Confidential 2/14 S-TAG Datasheet S-Label (Electronic Label System) REV 0.1 Samsung Electro-Mechanics 2015-07-01 Summary This datasheet presents the general performance and specifications of S-Tag for S-Label ESL (Electronic Shelf Label) system, which is based on IEEE 802.15.4. © 2015 Samsung Electro-Mechanics. All rights reserved The names of actual companies and products mentioned herein may be the trademarks of their respective owners. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the express written consent of Samsung Electro-Mechanics. This document is subject to change without notice.
S-TAG Datasheet(ST-GM6000N) Preliminary REV 0.1 Samsung Electro-Mechanics Proprietary and Confidential 3/14 Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................... 5 1.1 FEATURES ......................................................................................................................... 6 1.2 TYPICAL APPLICATIONS ......................................................................................................... 6 1.3 APPEARANCE ...................................................................................................................... 6 2 SPECIFICATION .................................................................................................................. 7 2.1 PRODUCT SPECIFICATION ....................................................................................................... 7 2.2 RADIO (RF) SPECIFICATION ................................................................................................... 7 2.3 NFC SPECIFICATION............................................................................................................. 8 2.4 MECHANICAL DRAWING ......................................................................................................... 8 2.5 LABELS ............................................................................................................................. 9 3 PACKAGE ........................................................................................................................... 11 4 CAUTIONS FOR TREATMENT............................................................................................. 12 4.1 USAGE ENVIRONMENT .......................................................................................................... 12 4.2 STORAGE AND USE .............................................................................................................. 12 4.3 BATTERY REPLACEMENT ........................................................................................................ 13 4.4 FCC ............................................................................................................................... 14
S-TAG Datasheet(ST-GM6000N) Preliminary REV 0.1 Samsung Electro-Mechanics Proprietary and Confidential 4/14 Document History Rev. Date Revision history Page 0.1 01 JUL 2015 Draft -
S-TAG Datasheet(ST-GM6000N) Preliminary REV 0.1 Samsung Electro-Mechanics Proprietary and Confidential 5/14 1 General Description This S-Tag product is a part of Samsung S-Label (Electronic Shelf Label) system as well as S-Label Gateway (S-Gate), Remote controller (S-RC). S-Label system make up a system that electronically displays price and other product information on S-Tags, which has been traditionally printed or written on paper in places like retail markets. S-Tag receives product price/information updates from S-Gate and updates or changes its display of price and other information. S-Tag is the product based on IEEE standard 802.15.4 for low power wireless communication applications. S-Tag consists of RF transceiver, RF circuitry and 8051-compatible MCU offering IEEE 802.15.4 based network protocol and MAC protocol and other peripheral devices.
S-TAG Datasheet(ST-GM6000N) Preliminary REV 0.1 Samsung Electro-Mechanics Proprietary and Confidential 6/14 1.1 Features - Display : E-Paper active type Display (6.0 Inch, 128 Dpi, 600 * 448 Pixel) - Communication : Wireless communication based on IEEE 802.15.4 (2405~2480MHz)- Operating on 2.4GHz Unlicensed ISM band for ZigBee- Low Power Consumption- External Wakeup : RF Wakeup (Using ISM Band(2.4GHz))- Outline Dimension : 134.4 mm x 109.5 mm x 14.2 mm- Working condition: Indoor where wireless communication is available.- NFC(13.56MHz) Available1.2 Typical Applications - Retail industry with electronic displays, platforms, solutions and services.- Intelligently communicating, managing, and optimizing price and product information.1.3 Appearance Figure 1 Appearance
S-TAG Datasheet(ST-GM6000N) Preliminary REV 0.1 Samsung Electro-Mechanics Proprietary and Confidential 7/14 2 Specification 2.1 Product Specification Item Description Size 134.4 mm x 109.5 mm x 14.2 mm Battery CR2450 Lithium Battery (3V, 4PCS) 2.5 ~ 3.3Vdc(condition : In active status) Display E-Paper active type Display (118.80 * 88.26 mm, 128 Dpi, 600 * 448 Pixel) Housing Color White Information display Price, Unit, Symbol etc. Communication Wireless communication based on IEEE 802.15.4 (2405~2480MHz) Communication Distance Radius 20m (Line of Sight) Operation Temp. 0 ~ 40 ℃ (@20~60% RH)Etc. No additional anti-theft locking structure : Rail Mounted only 2.2 Radio (RF)1 Specification Item Parameter SPEC Unit Condition Min Typ Max TX Transmit Power 6 8 10 dBm Error Vector Magnitude 10 30 % When measured for 100 chips Tx Current 40 mA Total current at max Tx Power RX Receiver Sensitivity -90 - - dBm PER < 1% 1 Test Channel : 2480MHz
S-TAG Datasheet(ST-GM6000N) Preliminary REV 0.1 Samsung Electro-Mechanics Proprietary and Confidential 8/14 2.3 NFC Specification Items Parameter spec. Units Condition Min Typ Max NFC Read/Write Distance - 40 - mm PCB status NFC Read/Write Distance - 30 - mm Final Assy status 2.4 Mechanical Drawing Figure 2 Mechanical Dimension
S-TAG Datasheet(ST-GM6000N) Preliminary REV 0.1 Samsung Electro-Mechanics Proprietary and Confidential 9/14 2.5 Labels 2.5.1 Code Information Serial 1, 2 Code Value 13 Y 5 S A A 2JW ① ② ③ ④ ⑤ ⑥ ⑦ ①Year : Last two digits of manufacturing year. (00 ~ 99, Example : 2013 is '13') Month : Manufacturing month② (1 ~ 9, X(10), Y(11), Z(12)) Date : Manufacturing date③(1 ~ 9, A(10) ~ V(31)) Vendor : Manufacturing v④endor(S : SEMTHAI, T : TSEM, etc) Line number : Manufacturing Line number⑤('A', 'B', 'C', etc) Revision : Product revision number⑥(A : First, B : Second, C : Third, etc.) ZigBee IC Lot Number⑦ : Last 3 characters of Lot Number(Example : YME06862JW is ‘2JW’)
S-TAG Datasheet(ST-GM6000N) Preliminary REV 0.1 Samsung Electro-Mechanics Proprietary and Confidential 10/14 2.5.2 Mac Label Drawings Front Mac label (65 X 3 mm) Back Label (33 X 23 mm) Figure 3 Mac Labels Product information is indicated in a printed sticker label. The information consists of MODEL (model name), MFD (manufacturing date), S/N (serial number), MAC (MAC address), certification mark, and Manufacture (SEMCO). 1) FCC ID : E2X-ST-GM6000N2) Model Name : ST-GM6000N3) MFD : (Month).(Date).(Year) ex) MAY.16.20134) S/N : Daily Production quantity (5 digits) & Serial Number Information (hexadecimal 10 digits)5) MAC : barcode & barcode number(hexadecimal 12 digits)- 8 digits (1st ~ 8th) : : XXXXXXXX (Extension ID) (Increasing number : 00000000~FFFFFFFF) - 2 digits (9th~10th) : 64 (Tag size & type) - 1 digits (11th) : 3 (Attribute, 3 : Ultra IC & NFC IC) - 1 digits (12th) : X (Checksum : XOR calculation value 1~11 digits, 0~F)
S-TAG Datasheet(ST-GM6000N) Preliminary REV 0.1 Samsung Electro-Mechanics Proprietary and Confidential 11/14 3 Package VACUUM BAG : LABEL – BAG 1EA / OUTBOX : LABEL – OUTBOX 4EA (L,R 2SETS) Pallet : 1,200 X 1,000 (mm)
S-TAG Datasheet(ST-GM6000N) Preliminary REV 0.1 Samsung Electro-Mechanics Proprietary and Confidential 12/14 4 Cautions for Treatment Provisions should be made to protect against any damage to the product caused by improper handling. It is highly recommended that the product should be installed within 3 months from the date of arrival in the logistics hub. Recommended storage condition is in 0-40 Celsius degree, 20-60% RH environment. This RF device operates on the 2.4GHz frequency band and can produce radio interference. The device, therefore, may not be used for applications where safety of human lives is concerned. 4.1 Usage Environment Take extra cautions when using this RF device in the vicinity of other electronic devices and appliances. Most electronic devices and appliances use electromagnetic waves. Electromagnetic waves emitted by this RF device can affect other electronic devices and appliances. If using the device in an explosion hazard area, follow all safety regulations, instructions, and signals. 4.2 Storage and Use Moisture and liquids can damage internal parts and circuit boards if allowed to enter into the deviceitself.Do not place or store the product on a sloped surface. The product may slide and fall off thesurface and damaged.Use the product in temperatures ranging from +0℃ to +40℃. Parts and circuits may be damaged if used or stored under temperature extremes.The display panel needs extra care when handling.- Do not apply any impacts on outside since e-Paper display is fragile.- Continuous exposure to excessive moisture (over 60% RH) or UV makes display lifetimeshortened.- Ghosting image may be appeared in temperature conditions of less than 15 Celsius degree.Avoid areas with strong magnetism or subject to magnetism. Contact between the device and amagnetic object can lead to malfunctions.Do not place the product near heat-producing kitchen appliances like a stove or a microwave or in
S-TAG Datasheet(ST-GM6000N) Preliminary REV 0.1 Samsung Electro-Mechanics Proprietary and Confidential 13/14 the vicinity of highly pressurized containers. External impact to the product, such as from being dropped, can damage the product or batterycasing can be separated.Twisting and bending the product can damage the exterior casing and the internal components.If this product operates abnormally in eliminating battery vinyl or replacing battery, you shoulddischarge it by contacting battery terminal (+) and (-).This product uses 2.4GHz frequency band for wireless communication network. Radiocommunications can be limited or affected by other applications which share same frequency band,such as Wi-Fi, Bluetooth, ZigBee, etc.Frequent communications, updates and screen renewals may reduce battery life time.4.3 Battery Replacement 4.3.1 Audience Authorized persons with the following knowledge are allowed to replace the battery. BatteryElectronic assemblies like circuit boardCompliance of the instruction※ Note : If not authorized person, it will not give any warranty. 4.3.2 Instructions Risk of explosion through incorrect battery replacement.Keep attention that your hands are dry before you start with replacement.When replace the battery, please contact right person and get a instructions.※ Note : Battery rarely has a little stain or leak.
S-TAG Datasheet(ST-GM6000N) REV 0.1 Samsung Electro-Mechanics Proprietary and Confidential 14/14 4.3.3 Steps 1. Open the battery cover.2. Take out the batteries.3. Put in the new batteries.4. Check the batteries direction.5. Put the battery cover.4.4 FCC FCC ID : E2X-ST-GM6000N WARNING : This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, Including interference that may cause undesired operation. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. 4.3.3 Steps 1. Open the battery cover.2. Take out the batteries.3. Put in the new batteries.4. Check the batteries direction.5. Put the battery cover.4.4 FCC FCC ID : E2X-ST-GM6000N WARNING : This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, Including interference that may cause undesired operation. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Caution This device complies with FCC radiation exposure limits for an uncontrolled environment. Avoid operating this device at a distance less than 20cm form the user

Navigation menu