Samsung Electronics Co 612BNXH Intel Centrino Wireless-N+WiMax 6150 User Manual Nike eng indb

Download:
Mirror Download [FCC.gov]
Document ID	1553600
Application ID	B1YMTipx/BTEYcikeEIxtw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	333.22kB (4165213 bits)
Date Submitted	2011-10-01 00:00:00
Date Available	2012-03-26 00:00:00
Creation Date	2011-09-30 14:45:29
Producing Software	Acrobat Distiller 9.3.3 (Windows)
Document Lastmod	2011-09-30 14:45:29
Document Title	Nike_eng.indb
Document Creator	Adobe InDesign CS3 (5.0.4)
Document Author:	29418

User Guide
Getting Started
Using the Computer
Settings and Upgrade
Backup/Restoration
Appendix
Contents
Start
Chapter 1
Getting Started
Contents
Chapter 1. Getting Started
Chapter 3. Settings and Upgrade
22
25
30
66
68
69
71
74
75
78
83
Tips
Before You Start
Safety Precautions
Proper Posture During Computer Use
Overview
Turning the Computer On and Off
Chapter 2. Using the Computer
33
36
42
44
47
53
54
57
61
Keyboard
Touchpad
CD Drive (ODD, Optional)
Multi Card Slot (Optional)
Connecting an External Display Device
Connecting an External Digital Device
Adjusting the Volume
Wired Network
Wireless Network (Optional)
LCD Brightness Control
Easy Settings (Optional)
BIOS Setup
Setting a Boot Password
Changing the Boot Priority
Upgrading Memory (Optional)
Battery
Using the Security Slot
Chapter 4. Backup/Restore
85
Samsung Recovery Solution (Optional)
Chapter 5. Appendix
98
100
102
117
118
120
124
Important Safety Information
Replacement Parts and Accessories
Regulatory Compliance Statements
WEEE Symbol Information
Product Specifications
Glossary
Index
Chapter 1.
Getting Started
Tips
Before You Start
Safety Precautions
Proper Posture During Computer Use
22
Overview
25
Turning the Computer On and Off
30
Tips
Tip
The computer is not turning on or does not respond
and displays a blank screen.
Chapter
Chapter1.
Getting Started
Restore the computer using Samsung Recovery Solution.
1. Turn the computer on and press the F4 key when the
booting screen (SAMSUNG logo) appears.
2. If the Internet Explorer setting again window
appears, select Set again.
3. When the start menu screen appears, click Restore.
Restore Internet Explorer to its initial state.
1. Launch Internet Explorer, click Tools > Internet
Options > Advanced > Load defaults.
2. The computer will boot up in restore mode after a short
while and Samsung Recovery Solution appears.
The internet connection has slowed down or error
messages appear continuously while using the
Internet.
3. In the Internet default setting restoration window,
select Close.
The keyboard Fn keys (shortcut keys) do not work.
Install the Easy Settings (optional) program.
I want to restore the computer to the state when it was
purchased.
If you use the Samsung Recovery Solution function, you
can easily and quickly restore the computer to a previous
state even if you do not have a separate OS recovery DVD
or recovery CD.
I want to connect an external monitor, TV or projector.
Connect the display device and the computer with the
monitor and repeatedly press the F4 key while holding
down the Fn key.
This is a compatibility problem between the Hancom
Office software and Internet Explorer. To resolve this
problem, reinstall Internet Explorer 8 or install Internet
Explorer 7 or earlier.
How can I extend the battery usage time?
The battery usage time may be shortened if you recharge
the battery before it is completely discharged.
To resolve this problem, enter the BIOS Setup and select
Smart Battery Calibration to discharge the battery
completely and then recharge the battery.
For detailed information on a function,
refer to the corresponding section of the
User Manual.
Chapter 1
Getting Started
Before You Start
Before reading the User Guide, first check the following
information.
t Optional items, some devices and software referred to in
the User Guide may not be provided and/or changed by
upgrade.
Note that the computer environment referred in the User
Guide may not be the same as your own environment.
t The pictures used for the cover and the main body in the
User Manual are those of the representative model of each
series and may differ from the actual appearance of the
product.
t This guide decribes procedures for using both the mouse
and the touchpad.
t This manual has been written for the Windows operating
system. The descriptions and figures may differ depending
on the installed operating system.
t The User guide supplied with this computer may vary
depending on your model.
Using the software
t The software described in the main text can be launched
using the following menu path.
- Start > All Programs
- Start > All Programs > Samsung
t When the programs are not installed, select Samsung
Recovery Solution > System Software to install the
programs. (Only for models supplied with Samsung
Recovery Solution)
Safety Precaution Notations
Icon
Notation
Description
Warning
Failure to follow instructions marked with
this symbol, may cause personal injury
and or fatality.
Caution
Failure to follow instructions marked with
this symbol, may cause slight injury to
yourself or damage your property.
Text Notations
Icon
Notation
Description
Caution
Content included in this section includes
information required about the function.
Note
Content included in this section includes
helpful information to use the function.
Before You Start
Copyright
Š 2011 Samsung Electronics Co., Ltd.
Samsung Electronics Co., Ltd. owns the copyright of this manual.
No part of this manual may be reproduced or transmitted in any
form or by any means, electronic or mechanical, without the
consent of Samsung Electronics Co., Ltd.
The information in this document is subject to change without
notice due to improving the performance of the product.
Samsung Electronics shall not be liable for any data loss. Please
take care to avoid losing any important data and backup your data
to prevent any such data loss.
Chapter 1
Getting Started
Precautions for Operating System Support
If a problem occurs because of the reinstallation of other
operating systems(OS) or a previous version of a OS pre-installed
on this computer, or a software that does not support the OS, the
company will not provide technical support, a replacement or
refund, and if our service engineer visits you due to this problem,
a service charge will be applied.
Before You Start
About the Product Capacity Representation
Standard
About the capacity representation of the storage
The capacity of the storage device (HDD, SSD) of the manufacturer
is calculated assuming that 1KB=1,000 Bytes.
However, the operating system (Windows) calculates the storage
device capacity assuming that 1KB=1,024 Bytes, and therefore the
capacity representation of the HDD in Windows is smaller than the
actual capacity due to the difference in capacity calculation.
(E.g. For a 80GB HDD, Windows represents the capacity as 74.5GB,
80x1,000x1,000x1,000 byte/(1,024x1,024x1,024)byte = 74.505GB)
In addition, the capacity representation in Windows may be even
smaller because some programs such as Recovery Solution may
reside in a hidden area of the HDD.
Chapter 1
Getting Started
About Memory Capacity Representation
The memory capacity reported in Windows is less than the actual
capacity of memory.
This is because BIOS or a video adapter uses a portion of memory
or claims it for further use.
(E.g. For 1GB(=1,024MB) memory installed, Windows may report
the capacity as 1,022MB or less)
For more information, refer to the Samsung Recovery Solution
section.
Safety Precautions
For your security and to prevent damage, please read the
following safety instructions carefully.
Since this is commonly applied to Samsung Computers,
some pictures may differ from actual products.
Chapter 1
Getting Started
Keep a distance of 15cm or more between
the computer and the wall and do not place
any objects between them.
This may increase the internal temperature of
the computer and may cause an injury.
Do not install the computer on a slant or a
place prone to vibrations, or avoid using the
computer in that location for a long time.
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
Installation Related
Do not install the product in places exposed
to humidity such as a bathrooms.
There is a danger of electric shock. Use the
product within the operating conditions
specified in the Manufacturers User Guide.
Keep the plastic bags out of the reach of
children.
There is a danger of suffocation.
This increases the risk that a malfunction or
damage to the product will occur.
Avoid exposing any part of your body to the
heat from the computer vent or AC adapter
for a long time when the computer is on.
Exposing a part of your body close to the heat
from the vent or AC adapter for long periods of
time may cause a burn.
Avoid blocking the vent at the bottom or
side of the computer when using it on a bed
or cushion.
If the vent is blocked, there is a danger of
damaging the computer or overheating the
inside of the computer.
Ver 2.9
Chapter 1
Getting Started
Safety Precautions
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
If the power cord or power outlet makes a
noise, disconnect the power cord from the
wall outlet and contact a service center.
There is a danger of electric shock or fire
hazard.
Power Related
The power plug and wall outlet figures may differ
depending on the country specifications and the product
model.
Do not touch the main plug or power cord
with wet hands.
Do not use a damaged or loose main plug or
power cord or power outlet.
There is a danger of electric shock or fire
hazard.
Plug the power cord firmly into the power
outlet and AC adapter.
Failure to do so may cause fire hazard.
There is a danger of electric shock.
Do not exceed the standard capacity
(voltage/current) of a multiplug or power
outlet extension when using it for the
product.
There is a danger of electric shock or fire
hazard.
Do not unplug the power cord by pulling
the cable only.
If the cord is damaged, it may cause electric
shock.
Do not bend the power cord excessively or
do not place a heavy object over the power
cord. It is especially important to keep the
power cord out of reach of infants and pets.
If the cord is damaged, it may cause electric
shock or fire.
Chapter 1
Getting Started
Safety Precautions
Warning
AC Adapter Usage Precautions
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
Connect the power cord to an outlet or
multiple power plug (extended cable) with
a ground terminal.
Failure to do so may result in electric shock.
If water or another substance enters
the power input jack, AC adapter or the
computer, disconnect the power cord and
contact the service center.
If the notebook computer has an external
type (removable) battery, separate the
battery also.
Damage to the device within the computer
may cause electric shock or fire hazard.
Keep the power cord or outlet clean so that
they are not covered with dust.
Failure to do so may result in fire.
Connect the power cord to the AC adapter
firmly.
Otherwise, there is a danger of fire due to an
incomplete contact.
Use only the AC adapter supplied with the
product.
Using another adapter may cause the screen to
flicker.
Do not place heavy objects or step onto
the power cord or AC adapter to avoid
damaging the power cord or AC adapter.
If the cord is damaged, there is a danger of
electric shock or fire.
Safety Precautions
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
Battery Usage Related
Please charge the battery fully before using the
computer for the first time.
Keep the battery out of the reach of infants
and pets, as they could put the battery into
their mouths.
There is a danger of electric shock or choking.
Use an authorized battery and AC adapter
only.
Please use an authorized battery and adapter
approved by Samsung Electronics.
Unauthorized batteries and adapters may not
meet the proper safety requirements and may
cause problems or malfunctions and result in
an explosion or fire.
Chapter 1
Getting Started
10
Do not use the computer in a badly
ventilated location such as on bedding, on a
pillow or cushion, etc, and do not use it in a
location such as room with floor heating as
it may cause the computer to overheat.
Take care that the computer vents (on the side
or the bottom) are not blocked especially in
these environments. If the vents are blocked,
the computer may overheat and it may cause a
computer problem, or even an explosion.
Do not use the computer in a humid
location such as a bathroom or sauna.
Please use the computer within the
recommended temperature and humidity
range (10~32ÂşC, 20~80% RH).
Do not close the LCD panel and put the
computer into your bag to move it when it
is still turned on.
If you put the computer into your bag without
turning it off, the computer may overheat and
there is a danger of fire. Shut the computer
down properly before moving it.
Safety Precautions
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
Chapter 1
Getting Started
11
Cutting the power to the internal battery
(for corresponding models only.)
Never heat the product(or battery) or put
the product(or battery) into a fire. Do not
put or use the product(or battery) in a hot
location such as a sauna, inside a vehicle
exposed to the heat, and so on.
There is a danger of an explosion or fire.
Take care not to allow metal objects such as
a key or clip to touch the battery terminal
(metal parts).
If a metal object touches the battery terminals,
it may cause excessive current flow and it may
damage the battery, or result in a fire.
If liquid leaks out of the product(or battery)
or there is a funny smell coming from
the product(or battery), remove the the
product(or battery) the computer and
contact a service center.
There is a danger of an explosion or fire.
To use the computer safely, replace a dead
battery with a new, authorized battery.
t For products with built-in batteries, customers cannot remove
the battery.
t In the case of flooding, lightning or explosions, you can cut
the battery power by inserting an object such as a paper clip
into the [Emergency Hole] at the bottom of the computer.
t Disconnect the AC adapter and insert an object such as a
paper clip into the hole at the bottom of the computer to cut
the battery power.
In the case of flooding, lightning or explosions, cut
the battery power, do not reconnect the AC adapter,
and immediately contact Samsung Electronics so that
the appropriate countermeasures can be taken.
Chapter 1
Getting Started
Safety Precautions
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
t Thereafter, if you connect the AC adapter, the battery power
will be supplied again.
t Do not cut the battery power under normal
conditions.
t This may result in data loss or a product
malfunction.
The location of the Emergency Hole may differ depending
on the model.
12
Usage Related
Disconnect all cables connected to the
computer before cleaning it. If your
notebook is external & removable battery
type, remove the external battery.
There is a danger of electric shock or damage
to the product.
Do not connect a phone line connected to a
digital phone to the modem.
There is a danger of a electric shock, fire or
damage to the product.
Do not place any container filled with water or
chemicals over or near the computer.
If water or chemicals enter the computer, this
may cause fire or electric shock.
Chapter 1
Getting Started
Safety Precautions
Warning
13
Upgrade Related
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
If the computer is broken or dropped,
disconnect the power cord and contact a
service center for a safety check.
If the notebook computer has an external
type (removable) battery, separate the
battery also.
Using a broken computer may cause electric
shock or fire hazard.
Avoid direct sunlight when the computer
is in an air-tight location such as inside a
vehicle.
There is a danger of a fire hazard. The computer
may overheat and also present opportunity to
thieves.
Do not use your notebook PC for long
periods of time while any part of your
body is making direct contact with it. The
temperature of the product may increase
during normal operation.
This may result in harming or burning your skin.
Never disassemble the power supply or AC
adapter.
There is a danger of electric shock.
When removing the RTC (Real Time Clock)
battery, keep it out of the reach of children
as they could touch and/or swallow it.
There is a danger of choking. If a child has
swallowed it, contact a doctor immediately.
Use only authorized parts (multiplug, battery and memory) and never
disassemble parts.
There is a danger of damaging the product,
electric shock or fire hazard.
Shut down the computer and disconnect
all cables before disassembling the
computer. If there is a modem, disconnect
the phone line. If your notebook is external
& removable battery type, remove the
external battery.
Failure to do so, may cause electric shock.
Safety Precautions
Warning
Failure to follow instructions marked with this symbol may
cause personal injury and even fatality.
Security and Movement Related
Follow the instructions for the relevant
location (e.g. airplane, hospital, etc.) when
using a wireless communication device
(wireless LAN, Bluetooth, etc.).
Avoid exposing a drive to magnetic fields.
Security devices with magnetic fields include airport walk-through devices and security wands.
The airport security devices that check carry-on luggage, such as conveyor belts, use
x-rays instead of magnetism and will not
damage a drive.
Chapter 1
Getting Started
When carrying the notebook computer
with other items, such as the adapter,
mouse, books etc, take care not to press
anything against the notebook computer.
If a heavy object is pressed against the
notebook computer, a white spot or stain may
appear on the LCD. Therefore, take care not to
apply any pressure to the notebook.
In this case, place the notebook computer in
a separate compartment away from the other
objects.
14
Chapter 1
Getting Started
Safety Precautions
Caution
Failure to follow instructions marked with this symbol may
cause slight injury or damage to the product.
15
Battery Usage Related
Dispose of worn-out batteries properly.
t There is a danger of fire or explosion.
Installation Related
Do not block the ports (holes), vents, etc. of the product and
do not insert objects.
Damage to a component within the computer may cause electric
shock or fire.
When using the computer with it lying on its side, place it so
that the vents face upwards.
Failure to do so, may cause the internal temperature of the
computer to rise and the computer to malfunction or halt.
Do not place a heavy object over the product.
This may cause a problem with the computer. In addition, the
object may fall and cause injury, or damage the computer.
t The battery disposal method may differ depending on
your country and region. Dispose of the used battery in an
appropriate way.
Do not throw or disassemble the battery and do not put it
into water.
This may cause an injury, fire or explosion.
Use only a battery authorized by Samsung Electronics.
Failure to do so may cause an explosion.
Avoid contact with metal objects such as car keys or clips
when keeping or carrying a battery.
Contact with a metal may cause excessive current and a high
temperature and may damage the battery or cause a fire.
Charge the battery according to the instructions in the manual.
Failure to do so, may cause an explosion or fire from damage to
the product.
Do not heat the product(or battery) or expose it to heat (e.g.
inside a vehicle during the summer).
There is a danger of explosion or fire.
Chapter 1
Getting Started
Safety Precautions
Caution
Failure to follow instructions marked with this symbol may
cause slight injury or damage to the product.
Usage Related
Do not place a candle, light cigar, etc. over or on the product.
There is a danger of fire.
Use a wall outlet or multi-plug with a grounding part.
16
Connect only permitted devices to the connectors or ports
of the computer.
Failure to do so, may cause electric shock and fire.
Close the LCD panel only after checking if the notebook
computer is turned off.
The temperature may rise and it may cause overheating and
deformation of the product.
Do not press the Eject Button while the Floppy Disk/CD-ROM
drive is in operation.
Failure to do so may cause electric shock hazard.
You might lose data and the disk might be suddenly ejected and
could cause an injury.
Make sure to have the product tested by a safety service
engineer after repairing the product.
Take care not to drop the product while using it.
Authorized Samsung Repair Centers will carry out safety checks
after a repair. Using a repaired product without testing it for
safety may cause an electric shock or fire.
This may cause personal injury or loss of data.
Do not touch the antenna with electricity facility such as the
power outlet.
In case of lightning, immediately turn the system off,
disconnect the power cord from the wall outlet and phone
line from modem. Do not use a modem or phone.
There is a danger of electric shock.
There is a danger of electric shock or fire.
Failure to do so, may cause damage to the product.
Do not use your computer and AC-Adapter on your lap or
soft surfaces.
If the computer temperature increases, there is a danger of
burning yourself.
When handling computer parts, follow the instructions on
the manual supplied with the parts.
Safety Precautions
Caution
Failure to follow instructions marked with this symbol may
cause slight injury or damage to the product.
Chapter 1
Getting Started
17
Do not place your face close to the Optical Disk Drive tray
when it is operating.
There is a danger of injury due to an abrupt ejection.
Check CDs for cracks and damage prior to use.
If the computer emits smoke, or there is a burning smell,
disconnect the power plug from the wall outlet and contact
a service center immediately. If your notebook is external &
removable battery type, remove the external battery.
There is a danger of fire.
Do not use a damaged or modified CD/Floppy Disk.
There is a danger of damaging the product or personal injury.
Do not insert your fingers into the PC Card Slot.
There is a danger of injury or electric shock.
Use recommended computer cleansing solution when
cleaning the product and only use the computer when it is
completely dried.
Failure to do so may cause electric shock or fire.
Emergency disk eject method using paperclip should not
be used while the disk is in motion. Make sure to use the
emergency disk eject method only when the Optical Disk
Drive has stopped.
There is a danger of injury.
It may damage the disc and cause disorder of device and injury of
user.
Chapter 1
Getting Started
Safety Precautions
Caution
Failure to follow instructions marked with this symbol may
cause slight injury or damage to the product.
Upgrade Related
Take care when touching the product or parts.
The device may be damaged or you may be injured.
Security and Movement Related
When moving the product, turn the power off and separate
all connected cables first.
The product might be damaged or users may trip over the cables.
For long periods of not using the notebook computer,
discharge the battery and preserve as it is detached.
(For external & removable battery type)
The battery will be preserved at its best condition.
Take care not to throw or drop a computer part or device.
This may cause injury or damage to the product.
Do not operate or watch the computer while driving a
vehicle.
Make sure to close the computer cover before connecting
the power after a reassembly.
There is a danger of a traffic accident. Please concentrate on
driving.
There is a danger of electric shock if your body touches an
internal part.
Use parts authorized by Samsung Electronics only.
Failure to do so, may cause fire or damage the product.
Never disassemble or repair the product by yourself.
There is a danger of electric shock or fire.
To connect a device that is not manufactured or authorized
by Samsung Electronics, enquire at your service center
before connecting the device.
There is a danger of damaging the product.
18
Safety Precautions
Caution
Failure to follow instructions marked with this symbol may
cause slight injury or damage to the product.
Cautions on Preventing Data Loss
(Hard Disk Management)
Take care not to damage the data on a hard disk drive.
t A hard disk drive is so sensitive to external impact that an
external impact may cause loss of data on the surface of the
disk.
t Take extra care, because moving the computer or an impact
on the computer when it is turned on may damage the data of
the hard disk drive.
t The company is not liable for any loss of data on the hard disk
drive.
Chapter 1
Getting Started
19
Causes that may damage the data of a hard disk drive and
the hard disk drive itself.
t The data may be lost when an external impact is applied to the
disk while disassembling or assembling the computer.
t The data may be lost when the computer is turned off or reset
by a power failure while the hard disk drive is operating.
t The data may be lost and irrecoverable due to a computer virus
infection.
t The data may be lost if the power is turned off while running a
program.
t Sudden impact or movement to the computer while the hard
disk drive is operating, may cause files to be corrupted or bad
sectors on the hard disk.
To prevent data loss due to damage to the hard disk drive,
please backup your data frequently.
Chapter 1
Getting Started
Safety Precautions
Using the power supply in an airplane
Since the power outlet type differs depending on the type of
airplane, connect the power appropriately.
Since the representative figures of the power plug and
the auto adapter are used, they may differ from the actual
parts.
20
When using the AC power plug
Connect the power plug pins perpendicular into the center of the
power outlet.
t If the plug pins are not inserted into the center of the holes, the
plug pins are only inserted up to half their length. In this case,
reconnect the power plug.
t You have to insert the power plug into the outlet when the
power indicator (LED) of the power outlet is lit green. If the
power is connected properly, the power indicator (LED)
remains green.
Otherwise, the power indicator (LED) is turned off. In this case,
unplug the power, check if the power indicator (LED) is green,
and then reconnect the power plug.
Power Indicator (LED)
Center
Holes
220V Power Plug
110V Power Plug
Good Example
Wrong Example
Chapter 1
Getting Started
Safety Precautions
When using the auto adapter
When the cigar socket is provided, you have to use the auto
adapter (optional). Insert the cigar plug of the auto adapter into
the cigar socket and connect the DC plug of the auto adapter to
the power input port of the computer.
Auto Adapter
DC Plug
Cigar Plug
In-flight Cigar Socket
When using the Airplane Charging Converter
Depending on the airplane, you have to use the auto adapter
and charging converter. Connect the airplane charging converter
(optional) to the auto adapter (optional) and then insert the
airplane power input jack into the power outlet.
Charging
Converter
Connect the airplane power
input jack to the power
outlet of the airplane.
this end to
1 Connect
the auto adapter.
21
Chapter 1
Getting Started
Proper Posture During Computer Use
22
Maintaining a proper posture during computer use is very
important to prevent physical harm.
Do not use the computer while you are lying down, but only
while you are sitting down.
The following instructions are about maintaining a proper posture
during computer use developed through human engineering.
Please read and follow them carefully when using the computer.
Do not use the computer on your lap. If the computer
temperature increases, there is a danger of burning yourself.
Work while keeping your waist straight.
Otherwise, the probability of (RSI: Repetitive Strain Injury) from
repeated operations may increase and serious physical harm may
be caused.
Use a chair with a comfortable back.
Keep the center of your leg weight not on the chair but on
your feet when you are sitting on a chair.
t The instructions in this manual have been prepared so that
they can be applied within the coverage of general users.
To use the computer while talking over the telephone, use a
headset. Using the computer with the phone on your shoulder
is bad for posture.
Keep frequently used items within a comfortable work range
(where you can reach them with your hands).
t If the user is not included in the coverage, the
recommendation is to be applied according to the user’s
needs.
Proper Posture
Adjust the heights of desks and chairs appropriate to your
height.
The heights are to be adjusted so that your arm forms a right
angle when you place your hand over the keyboard while sitting
down on a chair.
Adjust the height of chair so that your heel is comfortably placed
on the floor.
Chapter 1
Getting Started
Proper Posture During Computer Use
Eye Position
Hand Position
Keep the monitor or LCD away from your eyes by at least
50cm.
Keep your arm at a right angle as shown by the figure.
Adjust the height of the monitor and the LCD screen so that its
top height is equal to or lower than your eyes.
Avoid setting the monitor and LCD excessively bright.
Keep the monitor and LCD screen clean.
If you wear glasses, clean them before using the computer.
When entering contents printed on a paper into the computer,
use a static paper holder so that the height of the paper is
almost equal to that of the monitor.
23
Keep the line from your elbow to your hand straight.
Do not place your palm over the keyboard while typing.
Do not hold the mouse with excessive force.
Do not press the keyboard, touchpad or mouse with excessive
force.
It is recommended connecting an external keyboard and
mouse when using the computer for long periods of time.
Chapter 1
Getting Started
Proper Posture During Computer Use
Volume Control (Headphones and Speakers)
Use Time (Break Time)
Check your volume first to listen to music.
24
Take a break for 10 minutes or more after a 50-minute period
when working for more than one hour.
Illumination
Check your
volume!
Check if the volume is too loud before using headphones.
It is not recommended using headphones for long periods of
time.
Any deviation from the equalizer default setting could cause
hearing impairment.
The default setting can be changed through software and
driver updates without your intervention. Please check the
equalizer default setting before first usage.
Do not use the computer in dark locations. The illumination
level for computer use must be as bright so for reading a book.
Indirect illumination is recommended. Use a curtain to prevent
reflection on the LCD screen.
Operation Condition
Do not use the computer in hot and humid locations.
Use the computer within the allowed temperature and
humidity range specified in the User Guide.
Chapter 1
Getting Started
Overview
Front View
t The pictures used for the cover and the main body in the
User Manual are those of the representative model of each
series. Therefore the colors and appearance of the pictures
may differ from the actual appearance of the product
depending on the model.
t The actual color and appearance of the computer may
differ from the pictures used in this guide.
1 Camera (Optional)
Using this camera, you can take still
pictures and record video.
2 LCD
The screen images are displayed here.
3 Speaker
A device used to generate sound.
Shows the operating status of the
computer.
4 Status Indicators
The corresponding operating LED is
lit when the corresponding function
operates.
5 Power Button
Turns the computer on and off.
6 Keyboard
A device to enter data by pressing the
keys.
t This may not be supported for some devices.
9 8
25
Touchpad/
Touchpad Buttons
The touchpad and touchpad buttons
provide functions similar to the mouse
ball and buttons.
Multi Card Slot
(Optional)
A card slot supports multi cards.
9 Microphone
You can use the built-in microphone.
Using the camera, web cam (Optional)
Using the Cyberlink YouCam program (optional), you can
take pictures or record video by using the computer’s built-in
camera by adding the balloon talk or frame effect.
Chapter 1
Getting Started
Overview
Status Indicators
26
On the contrary, if the ambient illumination
becomes brighter, the LCD becomes brighter
and the keyboard backlight is turned off.
Press the
keys simultaneously,
select the Easy Settings > Display, and
select or unselect the check box to turn
the illumination sensor ON/OFF.
2 HDD/ODD
Illumination
1 Sensor
(Optional)
This sensor detects the ambient illumination
of the PC.
If the ambient illumination becomes dark,
the LCD becomes dimmer and the keyboard
backlight is lit.
Charge Status
4 Power
This turns on when the hard disk is or ODD
being accessed.
This shows the power source and the battery
charge status.
Green: When the battery is fully charged or
the battery is not installed.
/ Red or orange: When the battery is
being charged.
Off: When the computer is running on
battery power without being connected to
AC adapter.
This shows the computer operating status.
On: When the computer is operating.
Blinks: When the computer is in Sleep mode.
Chapter 1
Getting Started
Overview
27
Right View
USB Port
1 (Optional)
You can connect USB devices to the USB
port such as a keyboard/mouse, digital
camera, etc.
Plays CD or DVD titles.
CD Drive (ODD)
2 (Optional)
Since an ODD(Optical Disk Drive) is
optional, the installed drive depends on
the computer model.
Chapter 1
Getting Started
Overview
Left View
6 7
1 Security Slot
You can secure the computer by
connecting a lock and cable to the
Security Slot.
2 DC Jack
A jack to connect the AC adapter that
supplies power to the computer.
Digital Video/Audio You can connect an HDMI cable to this
3 Port (HDMI)
port. Using this port, you can enjoy
(Optional)
digital video and audio on the TV.
4 Wired LAN Port
t The USB charging function is supported regardless of
whether the power is turned on or off.
t Charging a device through a chargeable USB port may take
longer than general charging.
USB 3.0 Port
or
Using a chargeable USB port, you can
5 Chargeable USB 3.0
access or charge a USB device.
Port
The port can be distinguished by
(Optional)
or
) printed on
the figure (
the port of the product.
t Using the Chargeable USB function when the computer is
running on battery power reduces the battery usage time.
t The user cannot evaluate the charging status of the USB
device from the computer.
6 Monitor Port
A port used to connect a monitor, TV
or projector supporting a 15pin D-SUB
interface.
You can connect a VGA adapter
(optional).
t This may not be supported for some USB devices.
t You can turn the Chargeable USB function ON/OFF by
selecting the Easy Settings > General > USB Charging
option. (Optional)
Connect the Ethernet cable to this port.
USB ports to which you can connect USB
devices as well as a chargeable USB port
are provided.
What is a chargeable USB port?
t USB device accessing and charging functions are
supported.
28
Ear-set / headset
Jack
This is the jack for connecting an ear-set
or headset.
Chapter 1
Getting Started
Overview
Bottom View
1 Speaker
A device used to generate sound.
Memory
The main memory is installed inside the
Compartment Cover cover.
This hole is to cut the power supply to
the battery. Insert and press one end of
an unfolded paper clip into the hole it to
cut the power to the battery.
29
Battery Emergency
Hole
For more information, refer to About
the function to cut the power supply
to the internal battery in the Safety
Precautions. For more information,
refer to About the function to cut the
power supply to the internal battery
in the Safety Precautions.
The location of the Emergency
Battery Hole may differ depending
on the model.
If you replace the bottom of the product, the model name,
serial number and some logos etched into the bottom of the
product will no longer be there.
For more information, please ask for assistance from the
service center.
Chapter 1
Getting Started
Turning the Computer On and Off
30
Turning the computer on
Connect the AC adapter.
Lift the LCD panel up.
Press the Power button to turn the computer on.
About Windows Activation
When you turn the computer on for the first time, the Windows
activation screen appears.
Follow the activation procedures according to the instructions on
the screen to use the computer.
Entering Sleep mode
When the computer is turned on, press the computer’s power
button once briefly.
Adjusting the screen brightness
If the power is turned on, the power LED is lit.
When the computer runs on battery power, the LCD brightness is
automatically set to low.
Press the
brightness.
key combination to increase the screen
Chapter 1
Getting Started
Turning the Computer On and Off
31
► For Windows XP
Turning the computer off
t Since the procedures to turn the computer off may differ
depending on the installed operating system, please turn
the computer off according to the procedures for the
purchased operating system.
Click the Start
button on the taskbar.
Click Turn Off Computer.
t Save all your data before clicking on Shut down.
t If Easy Settings is installed, the system shutdown location
may differ.
► For Windows 7
Click Start
computer.
> Shut down mode
Click Turn Off.
to shutdown the
If the system cannot be shut down due to a system error,
turn it off by pressing and holding the Power Button for a
minimum of 4 seconds.
Please note that turning the computer off by this method
may cause a system problem. Thereafter, when turning the
computer back on, the disk checking program may launch to
check for and correct any disk errors.
Chapter 2.
Using the computer
Keyboard
33
Touchpad
36
CD Drive (ODD, Optional)
42
Multi Card Slot (Optional)
44
Connecting an External Display Device
47
Connecting an External Digital Device
53
Adjusting the Volume
54
Wired Network
57
Wireless Network (Optional)
61
Keyboard
Shortcut key functions and procedures are discussed in the following sections.
t The keyboard image may differ from the actual keyboard.
t The keyboard may differ depending on your country. The following mainly describes the shortcut keys.
Shortcut Keys
You can use the following functions by pressing the keys below with the Fn key.
► A type model

► B type model

Chapter 2.
Using the computer
33
Chapter 2.
Using the computer
Keyboard
Fn
Name
Easy Settings
34
Function
The Samsung software control program, the Easy Settings, is launched.
Screen Brightness Control Controls the screen brightness.
CRT/LCD
Switches the screen output to the LCD or external monitor when an external monitor (or TV)
is connected to the computer.
Touchpad
Turns the Touchpad function on or off.
When using an external mouse only, you can turn the Touchpad off.
Mute
Press this button to turn the audio on or off.
Volume Control
Keyboard Backlight
Brightness Control
(Optional)
Silent Mode
Wireless network
Controls the volume.
Controls the brightness of the keyboard backlight. This function is only available for models
that support the keyboard backlight feature.
Reduces the Fan noise so that users can use the computer without hearing noise.
In models with a wireless network device, press this key to turn the wireless network device
on or off. (Only for models with a wireless network device.)
Chapter 2.
Using the computer
Keyboard
Other Function Keys (Optional)
Eject the CD (DVD).
Delete
35
Keyboard Backlit Function (Optional)
The keyboard Backlight are automatically turned on or off
depending on the ambient illumination. Therefore, you can easily
type with the keyboard when you are in a dark environment or at
night.
Performs the right-click mouse function (touchpad).
If you press the Fn Lock key, you can use hot keys even without
pressing the Fn key.
Press the
If you press the Num Lock key, you can use the numeric keys.
Num
Lock
If the hot keys do not work properly, you have to install the
Easy Settings.
key combination, click Easy Settings
> General > Keyboard Backlight and adjust the backlight
brightness.
The representative figure of the keyboard has been used, but
they may differ depending on the country or the model.
Chapter 2.
Using the computer
Touchpad
The touchpad provides the same function as a mouse and the left
and right buttons of the touchpad plays the role of the left and
right buttons of a mouse.
36
Basic Touchpad Functions
To use the touchpad, the touchpad driver is required.
Moving the cursor on the screen
A built-in Windows driver and a driver provided by the
manufacturer are provided. For a better performance, using the
driver provided by the touchpad manufacturer is recommended.
Place your finger on the touchpad slightly and move your finger.
The driver provided by the touchpad manufacturer is already
installed in this product by default when you purchase this
product. When you reinstall Windows or change the operating
system, using the driver provided by the corresponding
manufacturer is recommended.
t Touch the touchpad with your fingers only.
Anything other than your fingers, such as a ball-point pen,
will not be recognized by the touchpad.
t If you touch the Touchpad or press the Touchpad buttons
while booting up, the Windows boot time may be
extended.
t Checking the touchpad manufacturer Click the Start
> Control Panel > Hardware and Sound > Mouse >
Hardware tab and check the device (E.g. Elan, Synaptics,
etc. ).
t The Windows driver provides basic touchpad functions
(moving the pointer, clicking, etc.) but the gesture function
is not supported.
The mouse cursor will move accordingly. Move your finger in the
direction you wish to move the cursor.
Chapter 2.
Using the computer
Touchpad
37
Click Function
Right Button Function
Place a finger on the touchpad and click on an item once.
This corresponds to clicking the right mouse button.
Alternatively, press the left button once quickly and release it.
Press the right touchpad button once. The corresponding pop-up
menu appears.
Tap
or
Click
Click
Drag Function
Double-Click Function
Put your finger on the touchpad and quickly tap twice with your
finger on an item you want.
Alternatively, press the left touchpad button twice quickly.
Dragging refers to moving an item to another place after selecting
it.
Press and hold down the left touchpad button over an item you
want to drag and move the item to the new location.
TapTap
or
ClickClick
Move
Holding down the left
touchpad button
Chapter 2.
Using the computer
Touchpad
The Gesture Function of the Touchpad (Optional)
38
Configuring the Gesture Function
Some gesture functions may not be configured.
t The Touchpad Gesture function may not be provided and
the version of the function may differ depending on the
model. Some usage procedures may differ depending on
the version.
In this case, you can configure them using the following path.
t For detailed usage procedures, refer to the description in
the Touchpad Settings window.
t Since these descriptions are written on the basis of the
latest operating system, Windows 7, some of the content
and the figures of the descriptions may differ depending
on the operating system. Since the procedures for other
Windows operating systems are similar, use the computer
referring to these descriptions.
Using the Touchpad, you can use the following additional Gesture
functions.
Scroll function
Zoom functions
Page Move Function
► When using the Elan driver
Click the Start > Control Panel > Hardware and Sound >
Mouse > ELAN > Options button.
► When using the Synaptics driver
Click the Start > Control Panel > Hardware and Sound >
Mouse > Device Settings tab > Settings button.
The Touchpad Settings window appears. Click over the
corresponding item to select the item in the Select an item
and click OK.
To cancel the Gesture function, unselect the corresponding
item in the Touchpad Settings window and click OK.
Chapter 2.
Using the computer
Touchpad
39
The Scroll Function
Page Move Function
This function is the same as the scroll area of the Touchpad.
You can move to the previous or next page when you are looking
at a photo or surfing the Internet.
If you place two fingers over the Touchpad and move them up,
down, left or right, the screen is scrolled up, down, left or right
accordingly.
or
Zoom Functions
If you place two fingers over the Touchpad together or apart, the
current image or text is zoomed in or out.
Zoom-in
Zoom-out
or
For example, if you lightly brush three fingers to the left while you
are looking at a web site, you will return to the previous page.
Chapter 2.
Using the computer
Touchpad
Setting the Touchpad Sensitivity
If the touchpad reacts too sensitively or the pointer moves
unintentionally, please adjust the touchpad pointer speed and
sensitivity.
40
► When using the Elan driver
Click Start > Control Panel > Hardware and Sound > Mouse
> ELAN > Options > PalmTracking and then adjust the
sensitivity.
► When using the Synaptics driver
Adjusting the Touchpad Pointer Speed
Click Start > Control Panel > Hardware and Sound > Mouse >
Pointer Options and then adjust the pointer speed.
Adjusting the Touchpad Palm Detection Function
The palm detection function is to avoid malfunctions when the
palm touches the touchpad by mistake.
Click Start > Control Panel > Hardware and Sound > Mouse
> Device Settings > Settings > SmartSense and then adjust
the sensitivity.
When the touchpad pointer does not move smoothly:
Slide the bar appropriately in the direction of Minimum.
Minimum
Maximum
This function is provided by the touchpad driver provided by
the manufacturer.
When the touchpad pointer moves unintentionally (excessively):
Slide the bar appropriately in the direction of Maximum.
Chapter 2.
Using the computer
Touchpad
41
Touchpad On/Off Function
Locking with shortcut keys
Auto-locking when connecting USB mouse
If you want to use the mouse only without using the touchpad,
you can turn the touchpad off.
► When using the Elan driver
To lock the touchpad function, press the
keys.
You can set the touchpad and touchpad button settings in
the tabs that appear when clicking Start > Control Panel >
Hardware and Sound > Mouse.
Click Start > Control Panel > Hardware and Sound > Mouse
> ELAN, and check the Disable When external USB mouse
plug in option. This will turn the touchpad off when a USB
mouse is connected.
► When using the Synaptics driver
Click Start > Control Panel > Hardware and Sound > Mouse
> Device Settings, and check the Disable internal pointing
device when external USB pointing device is attached in
option. This will turn the touchpad off when a USB mouse is
connected.
In case of some touch-screen model, checking option locks
touchpad even though you did not connect a USB mouse.
This auto-locking function is not provided for some models.
Chapter 2.
Using the computer
CD Drive (ODD, Optional)
An optical disk drive is optional and may differ depending on
your computer model. For detailed specifications, refer to the
catalogue.
t Do not insert a cracked or scratched CD.
Otherwise, the CD may break and damage the optical disk
drive when the CD rotates at a high speed.
42
Inserting and Ejecting a CD
Insert the disc into the CD Drive so that the top of the disc
faces upwards.
When 90% of the disc is inserted into the drive, the disc is
automatically loaded into the drive.
t When you clean a CD or DVD title, wipe with a soft cloth
from inside to outside.
t The figures used for the description are of a representative
model. Therefore the figures may differ from the real ones.
t Using a CD that is not in the shape of a circle is not
recommended.
t The Slot Load ODD does not support mini discs (8cm).
CD Drive
t Do not pull or push the disc by force when the disc is
being automatically ejected or inserted. This may cause a
problem when ejecting or inserting a disc.
t To insert a disc, insert the disc into the center of the drive
with the appropriate pressure. If you insert a disc and apply
excessive force to one side of the tray, it may result in a
problem.
Chapter 2.
Using the computer
CD Drive (ODD, Optional)
To eject a disc, press the
Delete
key combination.
Alternatively, click Start > Computer > CD Drive, right-click
over the CD Drive and then select Eject from the popup
menu.
Then the disc operation stops and the disc is ejected from the
CD Drive.
t The
t The
Delete
key is optional.
Delete
key combination works in the BIOS Setup,
DOS, and Windows. However, it will not work during or
just after booting up or before the Easy display manager is
launched in Windows.
t If it does not work in Windows, double-click My Computer,
right-click over the CD Drive and select Eject from the
popup menu to eject a CD.
t A CD drive’s reading and writing speed may differ
depending on the condition and type of the media.
43
Chapter 2.
Using the computer
Multi Card Slot (Optional)
Using the multi card slot, you can read and write data to cards.
You can use a card as a removable disk and conveniently
exchange data with digital devices such as a digital camera, digital
camcorder, MP3, etc..
t Supported Cards : SD Card, SDHC Card, SDXC Card, MMC
Card (The MMC Card may not be supported depending on
your model.)
t You have to additionally purchase a multi card with the
necessary capacity depending on your requirements.
t You can use a multi card just like any data storage device.
A copyright protection function is not supported.
t Since you can lose a card when moving the computer,
keep the card separately.
t The figures used for the description are of a representative
model. Therefore the figures may differ from the real ones.
t If a slot protection dummy card is inserted into your
computer, remove the dummy card before using the
computer.
t These descriptions are written based on Windows 7, the
latest operating system. Therefore, some descriptions and
figures may differ from your operating system. But as the
usage is similar to other Windows operating systems, you
can use these descriptions for reference.
Using the card
Insert the card into the multi card slot in the indicated
direction.
Example) SD Card
44
Chapter 2.
Using the computer
Multi Card Slot (Optional)
The card drive appears. Click Open folder and view files.
If the window does not appear, click Start > Computer.
45
You can save, move and delete data by double-clicking the
corresponding drive.
You can only use the card after formatting it.
The device name of the card drive may differ depending on
your computer model.
If a window asking to scan and change appears, click
Continue Without Scanning. This will proceed to Step 2
above.
Using a Mini SD and RS-MMC
Since the above cards are too small, you cannot insert the cards
into the slot directly.
Insert the card into the dedicated adapter (available from most
electronic retailers) and then insert the adapter into the multi card
slot.
However, depending on the adapter’s body material, some
RS-MMC cards may not be recognized properly. Samsung
recommend that you check the card is recognized correctly prior
to purchasing.
Multi Card Slot (Optional)
To remove a memory card
Chapter 2.
Using the computer
Take hold of the end of the card and remove the card.
t To use a card to exchange data with a digital device such
as a digital camera, formatting the data using the digital
device is recommended.
To format a memory card
t When you try to use a card, which is formatted in the
computer, in another digital device, you may have to
format the card again in the device.
When using the memory card for the first time, you must format
the card before using it.
Formatting a card deletes all data saved on the card. If the
card includes data, backup the data before formatting it.
Click Start > Computer.
Click Start to the formatting.
Right-click over a card drive with the touchpad and select
Format.
46
t You cannot format, write or delete data from a SD, or SDHC
card with a write protection tab when it is in the Lock
position.
t Inserting and removing a memory card repeatedly may
damage the memory card.
Chapter 2.
Using the computer
Connecting an External Display Device
If you connect an external display device such as a monitor, TV,
projector, etc., you can view the picture on the wider screen of the
external device when you give a presentation or watch a video or
movie.
47
About the connection cable
Users should additionally purchase the necessary connection
cables.
The computer provides an analog monitor port (RGB) and a digital
video/audio port (HDMI).
The visual quality is sharper when a display device is connected
through the HDMI port rather than the analog monitor port (RGB)
port. Therefore, when multiple ports are supported, connect a
display device to a port that provides the better visual quality.
Analog Monitor (RGB) Cable

HDMI Cable
t Before you start, check the port and cable of the external
display device and then connect the display device to the
computer.
t Due to restrictions of the operating system the DualView
function is not supported for Windows 7 Starter.
Connecting to the monitor port (Optional)
You can experience a wider screen by connecting the computer to
a monitor, TV or projector with a monitor port.
You can give better presentations by connecting the computer to
a projector.
The VGA adapter is optional and may not be provided
depending on the model.
Connect the VGA adapter to the monitor port of the
computer.
Chapter 2.
Using the computer
Connecting an External Display Device
Connect the VGA cable (15-pin) to the connected VGA
adapter and then connect the other end of the VGA cable to
the VGA port of the monitor or the TV.
External
Monitor
TV
Projector
48
LCD
CRT
LCD+CRT Clone
VGA
Adapter
LCD+CRT Dual View
t If the screen is not switched even if you press the
Connect the power cord of the connected monitor, TV or
projector and turn the power on.
Press the
key combination, you have to install the Easy
Settings program.
t Alternatively, to set up dual view:
key combination once. Then the
Open the Display Settings window in the Control Panel,
select Monitor 2 and select the Expand to fit to this
monitor checkbox to set dual view. For more detailed
information, refer to the Windows online help.
setting screen appears where you can select the monitor
mode.
Since pressing the
key while holding down the
changes the selection, select a display device.
key
Chapter 2.
Using the computer
Connecting an External Display Device
Connecting through the HDMI port (Optional)
By connecting the computer to a TV with a HDMI port, you can
enjoy both a high visual quality and a high sound quality.
After connecting a TV through HDMI, you have to configure the
screen and sound.
49
Press the
key combination once.
Then the setting screen appears where you can select the
monitor mode.
key while holding down the
Since pressing the
changes the selection, select a display device.
key
Connect the HDMI cable to the HDMI port of the TV.
HDMI
External
Monitor
TV
Projector
LCD+HDMI Clone
LCD+HDMI Dual View
t External Monitor / TV is not supported in the DOS
Command Prompt window.
t This is only supported for models that support a TV output
port (HDMI).
t When a TV provides more than one HDMI port, connect
the computer to the DVI IN port.
t When connecting the computer to a TV, switch the
external input mode of the TV to HDMI.
t Simultaneous output to all 3 (LCD + CRT + HDMI) is not
supported.
t If the screen is not switched even if you press the
key combination, you have to install the Easy
Settings program.
Chapter 2.
Using the computer
Connecting an External Display Device
Setting up HDMI TV video (Optional)
► For Intel graphics cards
If the Desktop screen displayed on the TV does not fit to the TV
screen, configure it as follows depending on the graphics card.
Right-click over the Desktop and select Graphics Properties.
If a window appears where you can select the mode, select
Basic Mode and click OK.
t You can view the graphics card type by selecting Device
Manager > Display adapters and then clicking the +
symbol.
t The screen images and terms may differ from actual product
depending on the computer model and driver version.
50
Click Display > General Settings, select Customize Aspect
Ratio in the Scaling field, fit the Desktop to the TV screen
and click OK.
Chapter 2.
Using the computer
Connecting an External Display Device
Setting up HDMI TV audio (Optional)
You can configure the sound of the computer to be played
through the HDMI TV.
51
Change the setting to Digital Audio (HDMI), HDMI Device or
Digital Output Device, click Set Default and click OK.
You have to configure the sound device in the Control Panel
whenever you connect the HDMI TV in order to hear sound from
the computer on the TV.
The screen images and terms may differ from actual product
depending on the computer model.
Right-click over the Volume Control icon in the
notification area at the bottom right of the Desktop and
select Playback Devices.
(Alternatively, click the Control Panel > Hardware and
Sound > Sound.)
HDMI Output Device may not appear on the playback device
list depending on the computer model.
In this case, turn on the TV, connect the TV to the computer
using a HDMI cable and then switch to HDMI or LCD+HDMI
Clone or LCD+HDMI DualView mode using the Shortcut
Key(
).
To listen to sound on the computer after disconnecting the
HDMI TV, you have to set the Playback Device to Speakers.
Connecting an External Display Device
Using AMD Graphics Effectively (optional)
PowerXpress is Switchable Graphics technology that selectively
enables either the internal or external graphics chipset depending
on the program to extend the battery life time while maintaining
the graphics performance.
Chapter 2.
Using the computer
Right-click on the Desktop and select Configure Switchable
Graphics from the popup menu.
Click the Browse button and register the software and click
the Apply button.
This technology uses the internal graphics by default to reduce
battery consumption and switches to the external graphics when
the user uses some program functions that require a high graphics
performance such as games and playing videos.
t This description is only for Windows 7 and models with
AMD PowerXpress technology.
t This function is not supported for Windows 7 Starter.
t If Windows XP is installed, you can only use Internal
Graphics.
► Adding programs for PowerXpress graphics technology
You have to register the program to run some functions of a
program using the external graphics chipset.
Some programs are pre-registered. To register more programs,
complete the following steps.
t Unregistered programs will run using the internal graphics
chipset.
t You can register executable files (EXE) only.
52
From now on some of the functions of the registered
program that require a high graphics performance will
run with the external graphics chipset without additional
configuration.
Connecting an External Digital Device
You can save a file stored on a device onto the computer by
connecting a digital device such as a camera, camcorder or mobile
phone to the computer and using the file management functions.
Chapter 2.
Using the computer
The Auto run window appears. Click Open folder and view
files.
If the window does not appear, click Start > Computer.
Connecting and using a camera or camcorder
If a digital device such as a camera or camcorder is connected with
the computer, it is recognized as a removable disk so that you can
copy or move the files on the device.
Connect the USB port of the notebook computer and the
USB port of the digital device such as a camera using the USB
cable.
t Both the computer and the digital device must be turned
on.
t You have to additionally purchase the USB cable necessary
to connect the computer and the device.
Camera
53
Double-click the corresponding drive. You can then save,
move or delete data.
Camcorder
The device name of the card drive may differ depending on
the model.
Chapter 2.
Using the computer
Adjusting the Volume
You can adjust the volume using the keyboard and the volume
control program.
54
Using the Sound Recorder
The procedures to record sound using the Windows Recorder are
described below.
Adjusting the Volume using the Keyboard
► For Windows 7
Alternatively, press the
or
key combination to turn
the volume on or off.
Adjusting the Volume using the Volume Adjustment
Program
Connect a microphone to the microphone jack.
Right-click over the Volume icon
Recording Device.
Check if the microphone is set as the default recording
device.
Windows 7
Windows XP
on the taskbar and select
If this is the case, it is already set as the default device. If not,
right-click over the microphone and select Set default.
Click the Volume icon on the taskbar and slide the volume
control bar to adjust the volume.
Mute
You can also use the internal MIC.
Click Start > All Programs > Accessories > Sound Recorder
and click Start recording to start a recording.
Chapter 2.
Using the computer
Adjusting the Volume
► For Windows XP
Connect a microphone to the microphone jack.
Click Start > Control Panel > Sounds, Speech, and Audio
Devices > Sounds and Audio Devices.
Click Advanced from Volume and then, click Options >
Properties.
Select Realtek HD Audio input from the mixer device to
select Recording from Adjust Volume for.
You can also use the internal MIC.
55
Select Mic Volume from Show the following volume
controls and click OK.
When Recording Control window appears, check the Select
checkbox.
Increase the recording volume to increase the recording
sensitivity and close the window.
Click Start > All Programs > Accessories > Entertainment
> Sound Recorder.
Click the Record button to perform recording.
The default recording duration of Windows XP is 60 seconds.
Download a dedicated recording program from the Internet
to record audio data for a long time.
Chapter 2.
Using the computer
Adjusting the Volume
Using SoundAlive (Optional)
The SoundAlive function enables you to experience more
stereophonic sound using stereo speakers.
t SoundAlive is only supported in Windows 7.
t The software programs provider may vary, depending on
your computer model.
t In addition, some pictures may differ from actual product
depending on the computer model and software version.
Right-click over the Volume Control icon in the
notification area at the bottom right of the Desktop and
select Playback Devices. (Alternatively, click the Control
Panel > Hardware and Sound > Sound.)
► Basic Mode
Music
Select this mode to listen to music.
Movie
Select this mode to watch a movie.
Speech
Emphasizes voice over other sounds.
Silver
Silver mode is for people who have difficulty in
hearing.
► Advanced Mode
Finely tuned 25 presets are arranged on a square according to
their relative sound characteristics.
► User Mode
You can control a variety of sound effects.
Right-click over the Speakers and select Properties.
Select the SoundAlive tab and select one of the modes.
56
Chapter 2.
Using the computer
Wired Network
A wired network is a network environment used for a company
network or broadband internet connection at home.
t Since these descriptions are written on the basis of the
latest operating system, Windows 7, some of the content
and the figures of the descriptions may differ depending
on the operating system. Since the procedures for other
Windows operating systems are similar, use the computer
referring to these descriptions.
► For Windows 7
Click Start > Control Panel > Network and Internet >
Network and Sharing Center and click on Change adapter
settings in the left menu pane.
t The figures used for the description are of a representative
model. Therefore the figures may differ from the real ones.
Connecting to a Wired LAN through Windows
Open the wired LAN port cover and connect the LAN cable to
the LAN port.
57
► For Windows XP
Click Start > Control Panel > Network and Internet
Connections > Network Connection.
Chapter 2.
Using the computer
Wired Network
Select Local Area Connection and click the right button of
the touch pad and select Properties.
The LAN Device name may differ depending on your
computer’s Network Device.
► For Windows 7
Select Internet Protocol Version 4(TCP/IPv4) from the list
of Network Components and click Properties.
► For Windows XP
Click General tab and select a LAN driver from Connect
using:. Select Internet Protocol(TCP/IP) and click
Properties.
t The Network Component name may differ depending on
the Operating System Installed.
t To add a network component, click Install in the screen
shown in the figure above. You can add clients, services,
and protocols.
58
Chapter 2.
Using the computer
Wired Network
Configure the IP settings.
When using DHCP, select Obtain an IP address
automatically. To use a static IP address, select Use the
following IP address, and set the IP address manually.
Using the WOL (Wake On LAN) function
 is a function that activates the system from Sleep
mode when a signal (such as a ping or magic packet command)
arrives over the network (wired LAN).
► For Windows 7
Click Start > Control Panel > Network and Internet >
Network and Sharing Center and click on Change adapter
settings in the left menu pane.
► For Windows XP
Click Start > Control Panel > Network and Internet
Connections > Network Connection.
When not using DHCP, ask your network administrator for the
IP address.
When you have completed the settings, click the OK button.
The network settings have been completed.
59
Right-click on the Local Area Connection and select
Properties.
Wired Network
Click Configure > Power Management tab. Select Allow
this device to bring the computer out of standby, then
click OK. Restart the system.
- If the system wakes up from Sleep mode even though there
is no received signal, use the system after disabling the
 function.
- The LAN LED may not be turned off if System is shoutdown
without disabling the WOL (Wake on LAN) option.
- Connecting a wired LAN while using a wireless LAN may not
activate the  function. Set the Wireless LAN
to Disable to use the  function.
-  feature may not work while using Hybrid
power saving feature.
For Win7, Wake On LAN is not supported by Ping.
Chapter 2.
Using the computer
60
When connected to a 100Mbps/1Gbps wired LAN and the
computer exits Sleep/hibernation mode, a message appears
informing you of a connection to a 10Mbps/100Mbps
wired LAN. This happens because when the computer exits
standby/hibernate mode, restoring the network takes about
3 seconds. When the network is restored, it operates at
100Mbps/1Gbps.
When system is running on battery, some time it takes about
20sec after inserting LAN cable to be able to connect to
internet. This symptom happen as a result of power saving
feature to reduce battery consumption.
When system is running on battery, the Wired LAN speed
is decreased automatically to reduce battery consumption.
In such case, a 1Gbps /100Mbps LAN would function at
100Mbps/10Mbps speed.
Chapter 2.
Using the computer
Wireless Network (Optional)
A wireless network (Wireless LAN) environment is a network
environment that enables communicating between multiple
computers at home or a small-size office through wireless LAN
devices.
61
t The screen figures and terms may differ depending on the
model.
t Depending on the program version, some functions may
not be provided or different functions may be provided.
t The descriptions below are for computer models with
a Wireless LAN card or device. A Wireless LAN device is
optional.
The pictures in this manual may differ from the actual
product depending on your wireless LAN device model.
t If the wireless LAN is turned off, press the
key
combination to turn it on.
What is an Access Point (AP)?
An AP is a network device that bridges wired and wireless
LANs, and corresponds to a wireless hub in a wired network.
You can connect multiple wireless LAN installed computers
to an AP.
Chapter 2.
Using the computer
Wireless Network (Optional)
Connecting to a Wireless LAN through Windows
If there is an AP, you can connect to the Internet via the AP using
the Wireless LAN connection method provided by Windows.
► For Windows 7
Click Connect.
If a network key is set for the AP, enter the network key and
then click Connect.
For the network key, please ask your network administrator.
If you click the Network Connections
icon in the system
tray, a list of available APs appears. If you select an AP to
connect to, the Connect button appears.
AP List
62
When Connected to the AP is displayed, click the Close
button.
You can access the network.
Chapter 2.
Using the computer
Wireless Network (Optional)
► For Windows XP
63
Once Connected to AP is displayed, you can use a wireless
network.
Click the Wireless Network Connection icon from the
Taskbar using the right button of the touch pad. Then, click
View Available Wireless Networks.
Normal Wireless LAN Status
If the wireless LAN icon is displayed in the system tray of the
Taskbar, it indicates that the computer is connected to the Internet
properly (see below).
Select an AP to be connected and click Connect.
If a network key is set in the AP, the network key input
window will appear. Enter the network key in the input
window and click OK.
For a network key, contact the network administrator.
[Windows 7]
[Windows XP]
Chapter 2.
Using the computer
Wireless Network (Optional)
64
When APs are found but your computer is not
connected to the Internet
Abnormal Wireless LAN Status
When the wireless LAN is not connected
If the wireless LAN icon is displayed with an “X” in the system
tray of the Taskbar, it indicates that the wireless LAN device is
turned off or that there are no available APs. Or the wireless LAN is
disconnected.
This is the case when an AP with a weak signal has been set to
a high priority. Connect to an AP with a strong signal by clicking
it.
The currently connected AP.
The signal strength is low.
[Windows 7]
An AP with a strong signal strength
[Windows XP]
Click
If the wireless LAN is turned off, press the
key
combination to turn it on.
When you are not connected to the Internet
[Windows 7]
This is indicated by the wireless LAN icon
in the system tray of
the Taskbar. In this case, you have to check the IP address settings.
Please contact your network administrator and reconfigure the IP
address.
[Windows 7]
[Windows XP]
The currently connected AP.
The signal strength is low.
Click
An AP with a strong
signal strength
[Windows XP]
Chapter 3.
Settings and Upgrade
LCD Brightness Control
66
Easy Settings (Optional)
68
BIOS Setup
69
Setting a Boot Password
71
Changing the Boot Priority
74
Upgrading Memory (Optional)
75
Battery
78
Using the Security Slot
83
Chapter 3.
Settings and Upgrade
LCD Brightness Control
You can adjust the LCD brightness in 8 levels.
t Maintaining the changed LCD brightness even after
turning the computer on again
The screen brightness is automatically set to the brightest
level when AC power is connected and the brightness is
automatically set dimmer when the computer runs on battery
power to extend the battery use time.
Controlling the Brightness Using the Keyboard
Adjust the LCD brightness by pressing the
the
key or
key.
The LCD brightness can change up to 8 levels and the brightness
increases by 1 level when pressing the
66
key once.
To maintain the LCD brightness set by using the brightness
control keys or through the Power Options, follow the
procedures below.
► For Windows 7
1. Click Control Panel > Hardware and Sound > Power
Options.
2. Click Change the settings of the currently configured
mode.
3. Adjust the display brightness adjustment menu bar and
click the Save the changes button.
t Saving battery power consumption
Decreases the LCD brightness when the computer
is running on battery power to save battery power
consumption.
LCD Brightness Control
t LCD bad pixels principle of computer
Samsung observes the specifications regarding strict
quality and reliability of LCD. But in spite of that, it is
inevitable that there might be a small number of bad
pixels. A large number of bad pixels can cause problems in
appearance, but a small number of pixels doesn’t affect the
computer performance.
Therefore Samsung observes and manages the following
dot principles:
- Bright dot : 2 or less
- Black dot : 4 or less
- Combination of Bright and Dark : 4 or less
Instructions for Cleaning the LCD
Clean the LCD panel with a soft cloth lightly moistened with
computer cleansing detergent moving in one direction.
Cleaning the LCD panel with excessive force can damage the
LCD.
Chapter 3.
Settings and Upgrade
67
Chapter 3.
Settings and Upgrade
Easy Settings (Optional)
The Easy Settings is the integrated Samsung software control
program that allows users to configure various settings.
t This description is for models that support this function
running on Windows 7.
Functions
General
t The screen image and terminology may change depending
on the model.
t Depending on the program version, some functions may
not be provided or different functions may be provided.
Press the
You can configure the USB Charging, Battery
Life Extender, Fast Start, Silent Mode, Keyboard
backlit, Speed Boot and User Account Control.
This solution improves the system boot and
application loading performance.
Express cache
(Optional)
key combination to launch the Easy
Settings.
Select an item to configure the corresponding function.
68
Power
Management
Wireless
Network
A Fast Start function is only provided for
models that support the Express Cache
function. Take care not to delete the Express
Cache area.
You can configure the Power Plan (highperformance, power-saving, Samsung optimal
mode), Eco Mode, the power-saving settings
and the display settings.
You can configure whether to use the Bluetooth
and Wi-Fi options.
Wired Network You can select automatic or fixed IP settings.
Display
You can configure external display devices, and
the screen brightness/color.
Desktop
Background /
Screen Saver
You can configure the Desktop background and
the screen saver.
SoundAlive
You can configure the sound mode (Music,
Movie, Speech, Silver Mode etc.).
Chapter 3.
Settings and Upgrade
BIOS Setup
The BIOS Setup enables you to configure your computer hardware
according to your needs.
t Use the BIOS setup to define a boot password, change the
booting priority, or add a new device.
t Since incorrect settings may cause your system to
malfunction or crash, take care when configuring the BIOS.
69
Entering the BIOS Setup
Turn the computer on.
After a moment, the BIOS setup screen appears.
When the booting screen (SAMSUNG logo) appears, press the
F2 key to enter the BIOS Setup.
t The functions of the BIOS setup are subject to change for
product function enhancement purposes.
t The BIOS Setup menus and items may differ depending on
your computer model.
The items in the BIOS setup may differ depending on the
product.
Chapter 3.
Settings and Upgrade
BIOS Setup
70
System Setup Keys
The BIOS Setup Screen
The BIOS Setup menus and items may differ depending on
your computer model.
In the Setup, you have to use the keyboard.
F1
Setup Menu
Help
Help for the
selected
item appears
automatically.
Setup Items
Setup Menu
Description
SysInfo
This is a description about the basic specifications
of the computer.
Up & Down
Keys
F5/F6
Press to view the Setup Help.
Press to move up and down.
Press to change the item value.
F9
Press to load the default Setup
settings.
ESC
Press to return to a higher level
menu or to move to the Exit menu.
Left & Right
Keys
Press to move to another menu.
Advanced
Using this menu, you can configure the major
chipsets and additional functions.
Enter
Press to select an item or to enter a
sub menu.
Security
Used to configure security functions, including
passwords.
F10
Press to save the changes and exit
Setup.
Boot
This menu enables you to configure peripherals and
booting related settings such as the boot priority.
Exit
Used to exit the Setup either saving the changes or
not.
The keyboard image may differ from the actual keyboard.
Chapter 3.
Settings and Upgrade
Setting a Boot Password
When setting a password, you have to enter a password to use the
computer or enter the BIOS Setup.
71
In the Set Supervisor Password item, press .
Enter a password, press , re-enter the password for
confirmation, and press  again.
By configuring a password, you can restrict system access to
authorized users only and protect data and files saved on the
computer.
t Do not lose or forget your password.
t If you have forgotten your password, contact a Samsung
service center. In this case, a service fee will be charged.
t The screen images and terms may differ from actual
product depending on the computer model and driver
version.
The password can be up to 8 alphanumeric characters.
Special characters are not allowed.
Setting a Supervisor Password
A Supervisor Password is required to turn the computer on or to
start the System Setup.
When setting a Supervisor Password, users other than a supervisor
cannot use the computer.
Select the Security menu in the BIOS Setup.
The supervisor password has been set.
The supervisor password is required to turn the computer on
or to enter the BIOS Setup.
For some models, if the password entered message appears
in the Setup Notice window, the settings are not complete
until the  key is pressed.
Setting a Boot Password
Setting a User Password
Chapter 3.
Settings and Upgrade
72
Setting up a Hard Disk Drive Password
(Optional)
Users can start the system with a user password, but cannot enter
the System Setup. By doing this, you can prevent other users from
entering Setup.
If you set a password for a hard disk drive, it cannot be accessed
from another computer.
Before configuring a user password, a supervisor password must
have been configured. Deactivating the supervisor password also
deactivates the user password.
Press  in the Set HDD Password item and define a
password as described in Step 3 of the Setting up the Supervisor
Password.
In the Set User Password item, press  and complete the
procedures from Step 3 of Setting a Supervisor Password.
t The hard disk drive password setting function is not
provided for some models.
t Changing the hard disk drive password
Setting Up a Boot Password
To setup a boot password, the administrator password (Set
Supervisor Password) should be set in advance.
Set the Password on boot item to Enabled.
Once a boot password is set, you have to enter a password to boot
up the computer.
For security purposes, you can only change a hard disk
drive password after restarting the computer by pressing
the computer Power button.
If you cannot change the hard disk drive password or the
HDD Password Frozen message appears when entering
the BIOS Setup and then selecting Security > HDD
Password, press the Power button to turn the computer
on again.
Setting a Boot Password
Deactivating the Password
Press  on the password to be deactivated. For
example, to deactivate a supervisor password in the Set
Supervisor Password item, press .
In the Enter Current Password item, enter the currently
configured password and press .
Leave the Enter New Password item field empty, and press
.
Leave the Confirm New Password field empty, and press
.
The password is deactivated.
For some models the password is only canceled if the
 key is pressed in the Setup Notice window.
Chapter 3.
Settings and Upgrade
73
Chapter 3.
Settings and Upgrade
Changing the Boot Priority
By default, the highest boot priority device is set to the CD-ROM/
DVD drive. As an example, the procedures to change the highest
boot priority device to the hard disk drive are described below.
74
Press the down key (↓) to move to the SATA HDD item and
press the F6 key to move up to the top item.
Boot Menu
[Boot Priority Order]
The screen images and terms may differ from actual product
depending on the computer model and driver version.
1. SATA CD
: XXXXXXXXXXXX
2. SATA HDD : XXXXXXXXXXXX
Select the Boot menu in the BIOS Setup.
3. USB CD
: N/A
4. USB FDD
: N/A
5. USB HDD
: N/A
6. NETWORK : N/A
Press  on the Boot Device Priority item.
0WO.QEM
'PCDNG-G[RCF
6QWEJ2CF/QWUG
=1HH?
=$[0WO.QEM?
='PCDNGF?
+PVGTPCN.#0
2:'1241/
='PCDNGF?
=&KUCDNGF?
5OCTV$CVVGT[%CNKDTCVKQP
Press the F10 key to save the settings and exit Setup.
The highest boot priority device is now set to the Hard Drive.
Chapter 3.
Settings and Upgrade
Upgrading Memory (Optional)
These descriptions are for models with a memory
compartment cover. For the replacement or upgrade
procedures for the memory of models that do not have a
memory compartment cover, please ask for assistance from
your service center.
There are 1 or 2 memory slots according to the model’s
specification and users can replace the installed memory or add a
new memory.
Replace or install a new memory module only after shutting
the computer down completely and separating the AC
adapter from the computer.
75
Adding or Replacing Memory Modules
Disconnect the AC power adapter after turning off the
computer.
Insert an object, such as a paper clip, into the Emergency
Hole at the bottom of the computer to cut the battery power.
If the Power button does not work anymore, that means you
successfully shut the power off.
If you proceed without pressing the Emergency Hole, the
main board and the memory module may be damaged.
t It is recommended to add memory with the same
specifications (the same manufacturer and capacity) as that
of the installed memory.
t The images used for the illustration are of a representative
model, therefore the images may differ from the the actual
product.
Emergency Hole
The location of the Emergency Battery Hole may differ
depending on the model.
Chapter 3.
Settings and Upgrade
Upgrading Memory (Optional)
Remove the screw on the memory compartment cover at the
bottom of the computer using a screw driver.
76
Push the memory module down so that it is completely fixed.
If the memory does not fit easily, push the memory module
down while pulling the memory module latches outward.
Memory
Compartment Cover
Fixing Screw
Insert a new memory module into the memory slot at an
angle of approximately 30 degrees aligning it to the angle of
the memory slot.
Memory Module Latches
Close the memory compartment cover and fasten the screw.
Connect the AC adapter and press the power button to turn
the computer on.
If you do not connect the AC adapter, the computer will not
be turned on even if you press the power button.
Memory Slot
Upgrading Memory (Optional)
Removing a memory module
Pull the memory module latches outward.
The memory module will pop up.
Remove the memory module out at an angle of 30 degrees.
Chapter 3.
Settings and Upgrade
77
Chapter 3.
Settings and Upgrade
Battery
Please refer to the following instructions when running the
computer on battery power without connecting the AC power.
This computer is equipped with an internal battery.
Precautions
t Users cannot remove or replace the internal battery.
t To remove or replace the battery, use an authorized
service center in order to protect the product and
users. You will be charged for this service.
t Use only chargers specified in the User Manual.
t Never heat the battery pack, put it near or in a fire or use at
a temperature higher than 60°C, as this may cause fire.
t Please refer to the system operation environment of
this manual and operate and store the battery at room
temperature.
t Before using the computer for the first time, make sure to
connect the AC adapter and charge the battery completely.
t The images used for the illustration are of a representative
model, therefore the images may differ from the the actual
product.
The location of the
internal battery
78
Charging the Battery
An internal battery is embedded. Connect the AC adapter to
the power input jack of the computer. The battery will start
charging.
When charging is complete, the Charge LED turns green.
Status
Charge LED
Charging
Red or orange
Charging complete
Green
AC adapter not
connected
Off
Chapter 3.
Settings and Upgrade
Battery
Measuring the Remaining Battery Charge
You can view the battery charge status by completing the
following procedures.
Confirming the battery charge in the Taskbar
Disconnect the AC adapter and move the mouse cursor over
the battery icon in the system tray of the Taskbar to confirm the
remaining battery charge.
Extending the Battery Usage Time
Decreasing the LCD Brightness
Press the
keys on the keyboard to decrease the LCD
brightness to extend the battery usage time.
Using the power management program
This program helps you use the battery more efficiently
and supports the power mode optimized for the operating
environment.
► For Windows 7
Battery Usage Time Information
A battery is an expendable supply, so when using it over a long
time, the capacity/battery life is shortened. If the battery life is
reduced to under half of its initial time, we recommend purchasing
a new battery.
When not using the battery for a long time, store the battery after
charging it to 30-40% of its capacity. This extends the battery life
time.
79
Click Start > Control Panel > Hardware and Sound >
Power Options.
Alternatively, right-click the power measuring device icon
in the notification area of the taskbar and select Power
Options.
Chapter 3.
Settings and Upgrade
Battery
If the following screen appears, select one of the modes.
Maximum
Battery Mode
80
This mode is appropriate for the environment
that requires maximum battery lifetime. The
system performance may be degraded in this
mode.
t What is the Power-saving Effect?
This product displays the battery life in each power mode.
The higher the power saving effect increases, the longer
the graph bar is displayed.
t When Using Games or Multimedia
► For Windows XP
The system may not operate properly in maximum battery
mode. It is recommended to connect the AC adapter to the
system or to use the system in general mode.
Click Samsung Battery Manager.
t Usage Mode of Samsung Battery Manager
Select Power
Mode
Power-saving
Effect
- The maximum battery mode optimizes the system
operation speed to increase the battery run time, so the
program execution time may get longer.
- If you change the power settings, the properties in Power
Options window will also be changed.
Chapter 3.
Settings and Upgrade
Battery
81
Extending the Battery Life (Optional)
Using the Battery Calibration Function
In the Easy Settings program, click General and set the Battery
Life Extender to ON or OFF.
When charging/discharging the battery repeatedly for a short time
only, the battery usage time may be reduced by the difference
between the actual battery charge and the remaining charge
display.
OFF
This mode maintains 100% of the battery
charge when using the computer on AC power.
In this case, although the battery use time
increases, the battery life is reduced.
ON
This mode maintains 80% of the battery charge
when using the computer on AC power. In this
case, although the battery use time decreases,
the battery life is extended.
Alternatively, to extend the battery life
Press the F2 key when the Samsung logo appears in the
booting sequence to enter the BIOS Setup, select Advanced
> Battery Life Cycle Extension, and set it to Enable.
Then you can use the battery life cycle extension mode.
In this case, the actual battery charge and the remaining charge
display will be the same by discharging the battery completely
using the Battery Calibration function, and then recharging it
again.
The screen images and terms may differ from actual product
depending on the computer model and driver version.
Disconnect the AC power adapter after turning off the
computer.
Restart your computer and press the F2 button when the
Samsung logo appears, to start the BIOS Setup.
Chapter 3.
Settings and Upgrade
Battery
Move to the Boot > Smart Battery Calibration item using
the direction keys and press .
0WO.QEM
'PCDNG-G[RCF
6QWEJ2CF/QWUG
=1HH?
=$[0WO.QEM?
='PCDNGF?
+PVGTPCN.#0
2:'1241/
='PCDNGF?
=&KUCDNGF?
5OCTV$CVVGT[%CNKDTCVKQP
Highlight Yes in the Battery Calibration Confirmation
window and press .
The Battery Calibration function is activated and the battery
is forcefully discharged. To stop the operation, press the
 button.
This operation requires 3~5 hours depending on the battery
capacity and the remaining battery charge.
82
Using the Security Slot
You can secure the computer by connecting a lock and cable to
the Security Slot.
To use this feature, you have to purchase the lock and cable
additionally. To use the lock and cable, refer to the product
manual.
Tie the lock and cable to a fixed object and install the other end of
the cable to the security slot.
Chapter 3.
Settings and Upgrade
83
Chapter 4.
Backup / Restore
Samsung Recovery Solution (Optional)
85
Chapter 4.
Backup / Restore
Samsung Recovery Solution (Optional)
Samsung Recovery Solution is a program that enables restoring
or backing up the hard disk drive for when a problem occurs with
the computer.
If the computer fails to boot up, you can restore the computer by
pressing the
key in the booting screen.
85
Samsung Recovery Solution Functions
Backup/Restore Functions
Backup Function
Backs up drive C or required folders and files.
t Samsung Recovery Solution may not be provided or the
version may differ depending on the model. In addition,
some functions may not be provided or may differ
depending on the version.
For more information on using Samsung Recovery
Solution, please refer to the online help of the program.
t The screen images in this document may differ from actual
product.
t Complete Backup
Backs up drive C.
A problem
occurs
Backs up important folders and files.
Restore Function
Restores major Windows files, drive C, or
folders and files to the previous state.
t Basic Restore
t If your computer does not have an internal ODD, you need
an external ODD connected to your computer to use the
Backup Function or Restore Function using DVDs.
t The System Software function may not be provided
depending on the program version.
t Data Backup
Restores only major Windows files in a short
time.
t Complete Restore
VIRUS
Restores drive C to the previous, normal
state.
t Data Restore
Restores important files or folders to the
previously backed up state.
Chapter 4.
Backup / Restore
Samsung Recovery Solution (Optional)
System Software Functions
If you turn the power on for the first time, the Register
Windows screen appears. If you register Windows according
to the instructions on the screen, the computer will be
restarted.
After the computer has been restarted, the Partition Setup
screen appears.
Samsung Recovery Solution provides system software so that
you can reinstall or copy the device drivers and system software
necessary for normal operations onto a separate storage device.
To resize the C and D drives, adjust the partition size using
the slide bar and the click Next.
Restore Function
Not only can you use Samsung Recovery Solution when Windows
is running, but also when you are unable to boot up into Windows.
Let’s learn how to use Samsung Recovery Solution.
The Partition Setup function is only available when the
computer is turned on for the first time and will not
be available afterwards. Once you have completed the
partitioning, it cannot be resized. Partition the disk carefully.
Optional functions such as Initial State Image, Initial Status Backup,
and Partitioning are only available in some models.
If the image of the initial state is saved on a DVD or removable
storage device, connect the DVD drive or removable storage
device to the computer before using the function.
Partition Setup & Initial Status Backup
If you turn your computer on for the first time, the Initial Status
Backup function is performed after registering Windows. This
function saves an image of the Initial Status of the C drive to a
secure location so that users can restore the computer to the
Initial Status using the Complete Restore function. An Initial Status
Backup is only performed once immediately after the computer is
purchased.
86
The Initial Status Backup screen appears.
To continue the Initial Status Backup, click Restart Now. The
computer will restart.
The Initial Status Backup is performed to backup the initial
status of the C drive to a secure location. This backup image
is used for the Complete Restore function that restores your
computer to the initial status.
When the Initial Status Backup is complete, restart Windows.
Chapter 4.
Backup / Restore
Samsung Recovery Solution (Optional)
Restoring the computer
If the initial menu screen appears, click Restore.
Restore is a function that enables restoring the computer to a
saved point when the computer was purchased or a user-saved
point.
The Restore function provides the Basic Restore and Complete
Restore options.
– When Windows is running:
Click Samsung Recovery Solution.
– When Windows does not start:
key when the
Turn the computer on and press the
boot screen (SAMSUNG logo) appears. After a moment, the
computer boots up in Restoration mode and the Samsung
Recovery Solution screen appears.
For computers supporting the touch screen function, the
touch screen function does not work during Restore Mode. In
this case, please use the touchpad or mouse.
If you click Select by Symptom, the Select by Symptom
menu appears. If you select a symptom, a recommended
restoration option will blink. Click the restoration option to
continue.
87
Chapter 4.
Backup / Restore
Samsung Recovery Solution (Optional)
Select either Basic Restore or Complete Restore from the
Restore menu.
88
In the Advanced menu, you can change the size of the hard
drive partitions (e.g. C: and D:).
To restore the computer to the initial state, click Computer
Initial State and perform the restoration process according
to the instructions that appear on the screen.
t Make sure to backup your data in advance, as all data will
be deleted after the partition size is changed.
t The Advanced menu is only activated when the computer
boots up in the restoration area.
key during the booting sequence.)
(by pressing the
Since a Complete Restore deletes all user data as well
as additionally installed programs, please backup your
important data first using the Data Backup function, before
running Complete Restore.
Run Complete Restore if the computer does not work even
after Basic Restore has been completed.
The computer boots up into restoration mode and the
restoration progress message appears. If you click OK, the
restoration begins. The restoration may take some time,
please wait for a moment.
When the ‘Restart the System’ message appears after the
restoration is complete, click OK to restart the system.
Make sure that the power cord is connected while the
restoration is in process. The first time the computer boots
up after a Complete Restore has been performed, the speed
of the boot process may be slowed down due to the system
optimization process. At this time, do not shut the computer
down by force.
Chapter 4.
Backup / Restore
Samsung Recovery Solution (Optional)
89
Complete Backup/Restore
A Complete Backup saves the complete image of the C drive
onto another drive or DVD. A Complete Restore restores the
image file saved by the Complete Backup onto the C drive.
Complete Backup
If you perform the Complete Backup function onto a DVD or
removable storage device, you can restore your computer
even when a problem occurs with the hard disk or when the
restoration area is removed.
To create a backup, a removable storage device with at least
15 GB of free space is required.
Click Backup in the start screen of the Samsung Recovery
Solution.
Enter a description of the current status of the computer and
click Next.
After connecting a DVD drive or removable storage device,
you can specify the DVD drive or removable storage device
as the Save Path.
Select Drive D.
Select the DVD drive.
When the option selection item appears, select an option
and click Next.
The LiveImaging and System Software Backup functions are
supported as options for the Complete Backup operation.
t LiveImaging: Performs the Complete Backup operation
while Windows is running. The backup operation using
LiveImaging may slow down if the hard disk drive is
accessed frequently by other applications.
t System Software Backup: This function backs up the
system software on to the DVD after the completion of the
Complete Backup operation.
Chapter 4.
Backup / Restore
Samsung Recovery Solution (Optional)
When the system restarts in Restoration Mode, the Complete
Backup operation begins. Continue with the backup by
following the instructions.
t Samsung Recovery Solution supports the DVD+R, DVD-R,
DVD+RW and DVD-RW formats.
t If the LiveImaging option has been selected, the Complete
Backup operation begins without the computer being
restarted.
Continue with the Complete Backup operation by following
the instructions.
90
When the ‘Restart the System’ message appears after the
backup is complete, click OK to restart the system.
If the LiveImaging option has been selected, the computer is
not restarted.
Chapter 4.
Backup / Restore
Samsung Recovery Solution (Optional)
Complete Restore
91
Select a Complete Backup restoration point in the
restoration point selection screen and click the Next button.
The system is restarted.
The restoration progress message appears after the computer
boots up in restoration mode. If you click OK, the restoration
begins.
– When backing up onto DVD
Turn the computer on and insert the backup DVD into the
DVD drive.
If there are multiple backup DVDs, insert the first DVD.
– When backing up to a removable storage device
Connect the removable storage device.
– When backing up to another drive
Proceed to Step 2.
When the Samsung Recovery Solution start screen appears,
click Restore and then click Complete Restore.
If multiple DVDs have been used for a Complete Backup,
whenever burning a DVD is completed, the “Insert the next
DVD” message will appear.
When the ‘Restart the System’ message appears after the
restoration is complete, click OK to restart the system. The
Complete Restore has been completed.
Chapter 4.
Backup / Restore
Samsung Recovery Solution (Optional)
92
Data Backup/Restore
The Data Backup function enables you to backup specific files
and folders to another drive, DVD or removable storage device.
Data Restore enables you to restore data using the data saved by
a Data Backup when data is lost. This guide describes the Backup
and Restore procedures on the basis of backing up and restoring
by using DVD.
Data Backup
When the Samsung Recovery Solution start screen appears,
click Backup and then click Data Backup.
In the data selection screen, select either Basic Selection or
Select from all, select a folder or file to be backed up, and
then click the Next button.
Enter a description for the backup in the Description field
so that you can easily recognize it later and specify the Save
Path.
Select Drive D.
Select the DVD drive.
If you have specified a hard disk drive or a removable disk as
the Save Path, the SamsungRecovery\SamsungData folder
is created on the corresponding drive (e.g. D:\) and the data
is saved to the folder. Take care to not delete the folder by
mistake or on purpose.
If you click the Next button, the Data Backup begins. If you
have selected the DVD drive as the Save Path, the “Insert a
blank DVD” message appears. Insert a blank DVD and click
the OK button.
The “Backup is completed” message appears.
If your computer has a DVD-Writer, you can specify the DVD
drive as the Save Path.
Samsung Recovery Solution (Optional)
Data Restore
– When backing up onto DVD
Turn the computer on and insert the backup DVD into the
DVD drive.
– When backing up to a removable storage device
Connect the removable storage device.
– When backing up to another drive
Proceed to Step 2.
When the initial menu screen appears, click Restore and then
click Data Restore.
Select a backup item to be restored in the backup list and
click the Next button.
Select a folder for the restoration and click the Next button.
Data Restore begins.
When Data Restore is completed, check if the data has been
restored to the specified folder.
Chapter 4.
Backup / Restore
93
Chapter 4.
Backup / Restore
Samsung Recovery Solution (Optional)
System Software Function
The System Software function is a function that enables you to
reinstall device drivers and System Software Programs or back up
those programs.
94
Installing System Software
When the initial menu screen appears, click System Software
> System Software Installation.
Move to the Easy Software Manager.
The system software function is supported by Samsung
Recovery Solution version 4 or later. Therefore, the
function may not be supported depending on the version.
The System Software Installation Function only works in
Microsoft Windows.
Using the Easy Software Manager, you can install device
drivers and applications.
After the installation is complete, the computer will restart.
Chapter 4.
Backup / Restore
Samsung Recovery Solution (Optional)
System Software Backup
When the initial menu screen appears, click System Software
> System Software Backup.
Specify the Save Path.
95
If you have specified a hard disk drive or a removable disk as
the Save Path, the SamsungSoftware folder is created on
the corresponding drive (e.g. D:\) and the system software
programs are saved to that folder. Take care to not delete the
folder.
If you click the Next button, the Software Backup begins. If
you have selected the DVD drive as the Save Path, the “Insert
a blank DVD” message appears. Insert a blank DVD and click
the OK button.
After the backup, the System Software Backup is
completed message appears.
If your computer has a DVD-Writer, you can specify the DVD
drive as the Save Path.
t If you want to install the System Software Programs backed
up on the drive, run the SecSWMgrGuide.exe file in the
SystemSoftware folder.
t When installing System Software Programs from the
backed-up DVD, insert the DVD and follow the System
Software Installation directions.
t To delete Samsung Recovery Solution, refer to the Help
section of the program.
Select Drive D.
Select the DVD drive.
Samsung Recovery Solution (Optional)
Chapter 4.
Backup / Restore
96
Recovery Solution Representation (Optional)
What is a Recovery Area?
t Samsung computers have an additional partition to recover
computers or save backup files.
(Only for models with the Samsung Recovery Solution.)
This partition is called a Recovery Area and it includes a recovery
image that comprises of the OS and application programs.
t You can either double-click the Samsung Recovery Solution
while booting the computer
icon on the desktop or press
to enter the Recovery Area. Then you can back up the present
computer state or recover the computer from backed up images.
t For deleting the Recovery Area, you need to use an additional
Recovery Area Removal Tool. After deleting the recovery area,
you can use the newly created partition for other uses, such as
for saving personal data. Be careful that once the recovery area is
deleted, the Samsung Recovery Solutions will not work anymore.
The capacity representation of the hard disk drive(HDD)
in Windows is different from the product specifications.
t The capacity of the storage device (HDD) of the manufacturer is
calculated assuming that 1KB=1,000 Bytes. However, the operating
system (Windows) calculates the storage device capacity assuming
that 1KB=1,024 Bytes, and therefore the capacity representation of
the HDD in Windows is smaller than the actual capacity.
This is due to the difference in capacity calculation and does
not mean the installed HDD is different from the product
specifications.
t The capacity representation in Windows may be smaller than the
actual capacity because some programs occupy a certain area of
the HDD outside of Windows.
t For models with Samsung Recovery Solution, the HDD capacity
representation in Windows may be smaller than the actual
capacity because Samsung Recovery Solution uses a hidden area
of about 5~20GB of the HDD to save the recovery image, and
that hidden area is not counted towards the total size available to
Windows.
The size of Samsung Recovery Solution varies by models because
of the different size of applied programs.
Chapter 5.
Appendix
Important Safety Information
98
Replacement Parts and Accessories
100
Regulatory Compliance Statements
102
WEEE Symbol Information
117
Product Specifications
118
Glossary
120
Index
124
Chapter 5
Appendix
Important Safety Information
Safety Instructions
Your system is designed and tested to meet the latest standards
for safety of information technology equipment. However, to
ensure safe use of this product, it is important that the safety
instructions marked on the product and in the documentation are
followed.
If your computer has a voltage selector switch, make sure that
the switch is in the proper position for your area.
Openings in the computer case are provided for ventilation.
Do not block or cover these openings. Make sure you provide
adequate space, at least 6 inches (15 cm), around the system
for ventilation when you set up your work area. Never insert
objects of any kind into the computer ventilation openings.
Ensure that the fan vents on the bottom of the casing are clear
at all times. Do not place the computer on a soft surface, doing
so will block the bottom vents.
If you use an extension cord with this system, make sure that the
total power rating on the products plugged into the extension
cord does not exceed the extension cord power rating.
For Notebooks with glossy display bezels the user should
consider the placement of the Notebook as the bezel may
cause disturbing reflections from surrounding light and bright
surfaces.
Always follow these instructions to help guard against
personal injury and damage to your system.
Setting Up your System
Read and follow all instructions marked on the product and in
the documentation before you operate your system. Retain all
safety and operating instructions for future use.
Do not use this product near water or a heat source such as a
radiator.
Set up the system on a stable work surface.
The product should be operated only with the type of power
source indicated on the rating label.
Ensure that the electrical outlet you are using to power your
equipment is easily accessible in case of fire or short circuit.
98
NB Ver 2.9
Important Safety Information
Care During Use
Do not walk on the power cord or allow anything to rest on it.
Do not spill anything on the system. The best way to avoid
spills is to not eat or drink near your system.
Some products have a replaceable CMOS battery on the
system board. There is a danger of explosion if the CMOS
battery is replaced incorrectly. Replace the battery with the
same or equivalent type recommended by the manufacturer.
Dispose of batteries according to the manufacturers
instructions. If the CMOS battery requires replacement insure
that a qualified technician performs the task.
When the computer is turned off, a small amount of electrical
current still flows through the computer.
To avoid electrical shock, always unplug all power cables,
remove the battery and modem cables from the wall outlets
before cleaning the system.
Unplug the system from the wall outlet and refer servicing to
qualified personnel if:
– The power cord or plug is damaged.
– Liquid has been spilled into the system.
– The system does not operate properly when the operating
instructions are followed.
– The system was dropped or the casing is damaged.
– The system performance changes.
Chapter 5
Appendix
99
The Instruction On Safety Operation of NotePC
1. When installing and operating devices please refer to safety
requirements in the user guide.
2. Devices can be used only with the equipment specified in the
technical specifications of the devices.
3. If any smell of burning or smoke is detected from the computer
the unit should be switched off and battery removed. The unit
should be checked by a qualified technician before reuse.
4. Service and repair of devices should be carried out by
authorized service centers.
5. Do not allow your portable computer to operate with the base
resting directly on exposed skin for extended periods of time.
The surface temperature of the base will rise during normal
operation (particularly when AC Power is present). Allowing
sustained contact with exposed skin can cause discomfort or
eventually a burn.
Chapter 5
Appendix
Replacement Parts and Accessories
Use only replacement parts and accessories recommended by
manufacturer.
To reduce the risk of fire, use only No. 26 AWG or larger
telecommunications line cord.
Do not use this product in areas classified as hazardous.
Such areas include patient care areas of medical and dental
facilities, oxygen rich environments, or industrial areas.
100
Laser Safety
All systems equipped with CD or DVD drives comply with the
appropriate safety standards, including IEC 60825-1. The laser
devices in these components are classified as “Class 1 Laser
Products” under a US Department of Health and Human Services
(DHHS) Radiation Performance Standard. Should the unit ever
need servicing, contact an authorized service location.
t Laser Safety Note:
Battery Disposal
Do not put rechargeable batteries or products powered by
non-removable rechargeable batteries in the garbage.
Use of controls or adjustments or performance of
procedures other than those specified in this manual
may result in hazardous radiation exposure. To prevent
exposure to laser beams, do not try to open the enclosure
of a CD or DVD drive.
t Class 1M laser radiation when operating part is open.
Contact the Samsung Helpline for information on how to dispose
of batteries that you cannot use or recharge any longer.
Follow all local regulations when disposing of old batteries.
THERE IS A RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
Do not view directly with optical instruments.
t Class 3B invisible laser radiation when open.
Avoid exposure to the beam.
Chapter 5
Appendix
Replacement Parts and Accessories
Connect and Disconnect the AC adapter
The socket-outlet shall be installed near the equipment and shall
be easily accessible.
General Requirements
The requirements listed below are applicable to all countries:
All power cord sets must be approved by an acceptable
accredited agency responsible for evaluation in the country
where the power cord set will be used.
The power cord set must have a minimum current capacity
of 7 A and a nominal voltage rating of 125 or 250 volts AC, as
required by each country’s power system. (USA ONLY)
The appliance coupler must meet the mechanical configuration
of an EN 60 320/IEC 320 Standard Sheet C7 (or C5) connector,
for mating with appliance inlet on the computer.
Do not unplug the power cord by pulling the cable only.
Power Cord Requirements
The power cord set (wall plug, cable and AC adapter plug) you
received with your computer meets the requirements for use in
the country where you purchased your equipment.
Power cord sets for use in other countries must meet the
requirements of the country where you use the computer. For
more information on power cord set requirements, contact your
authorized dealer, reseller, or service provider.
101
Regulatory Compliance Statements
Wireless Guidance
(If fitted with 2.4G band or 5G band)
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4GHz/5GHz Band, may
be present (embedded) in your notebook system. The following
section is a general overview of considerations while operating a
wireless device.
Additional limitations, cautions, and concerns for specific countries
are listed in the specific country sections (or country group
sections). The wireless devices in your system are only qualified for
use in the countries identified by the Radio Approval Marks on the
system rating label. If the country you will be using the wireless
device in, is not listed, please contact your local Radio Approval
agency for requirements. Wireless devices are closely regulated
and use may not be allowed.
The RF field strength of the wireless device or devices that may
be embedded in your notebook are well below all international
RF exposure limits as known at this time. Because the wireless
devices (which may be embedded into your notebook) emit less
energy than is allowed in radio frequency safety standards and
recommendations, manufacturer believes these devices are safe
for use. Regardless of the power levels, care should be taken to
minimize human contact during normal operation.
Some circumstances require restrictions on wireless devices.
Examples of common restrictions are listed on the next page:
Chapter 5
Appendix
102
t
 Radio frequency wireless communication can interfere
with equipment on commercial aircraft. Current aviation
regulations require wireless devices to be turned off while
traveling in an airplane.
802.11ABGN (also known as wireless Ethernet or Wifi) and
Bluetooth communication devices are examples of devices
that provide wireless communication.
t
 In environments where the risk of interference to other
devices or services is harmful or perceived as harmful,
the option to use a wireless device may be restricted or
eliminated. Airports, Hospitals, and Oxygen or flammable
gas laden atmospheres are limited examples where use
of wireless devices may be restricted or eliminated. When
in environments where you are uncertain of the sanction
to use wireless devices, ask the applicable authority for
authorization prior to use or turning on the wireless device.
t
 Every country has different restrictions on the use of
wireless devices. Since your system is equipped with
a wireless device, when traveling between countries
with your system, check with the local Radio Approval
authorities prior to any move or trip for any restrictions on
the use of a wireless device in the destination country.
t
 If your system came equipped with an internal embedded
wireless device, do not operate the wireless device unless
all covers and shields are in place and the system is fully
assembled.
Chapter 5
Appendix
Regulatory Compliance Statements
t
 Wireless devices are not user serviceable. Do not modify
them in any way. Modification to a wireless device will void
the authorization to use it. Please contact manufacturer for
service.
t
 Only use drivers approved for the country in which
the device will be used. See the manufacturer System
Restoration Kit, or contact manufacturer Technical Support
for additional information.
103
United States of America
USA and Canada Safety Requirements and Notices
Do not touch or move antenna while the unit is transmitting or
receiving.
Do not hold any component containing the radio such that the
antenna is very close or touching any exposed parts of the body,
especially the face or eyes, while transmitting.
Do not operate the radio or attempt to transmit data unless the
antenna is connected; if not, the radio may be damaged.
Use in specific environments:
The use of wireless devices in hazardous locations is limited by the
constraints posed by the safety directors of such environments.
The use of wireless devices on airplanes is governed by the Federal
Aviation Administration (FAA).
The use of wireless devices in hospitals is restricted to the limits
set forth by each hospital.
Explosive Device Proximity Warning
Do not operate a portable transmitter (such as a wireless
network device) near unshielded blasting caps or in an
explosive environment unless the device has been modified
to be qualified for such use.
Chapter 5
Appendix
Regulatory Compliance Statements
Use On Aircraft Caution
Regulations of the FCC and FAA prohibit airborne operation
of radio-frequency wireless devices because their signals
could interfere with critical aircraft instruments.
104
Unintentional Emitter per FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:(1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Other Wireless Devices
Safety Notices for Other Devices in the Wireless Network:
Refer to the documentation supplied with wireless Ethernet
adapters or other devices in the wireless network.
The Part 15 radio device operates on a non-interference basis
with other devices operating at this frequency. Any changes
or modification to said product not expressly approved by
Intel could void the user’s authority to operate this device.
This equipment has been tested and found to comply
with the limits for a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy. If not installed
and used in accordance with the instructions, it may cause
harmful interference. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
t Reorient or relocate the receiving antenna.
t Increase the separation between the equipment and
receiver.
t Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
t Consult the dealer or an experienced radio/TV technician
for help.
Regulatory Compliance Statements
If necessary, the user should consult the dealer or an experienced
radio/television technician for additional suggestions. The user
may find the following booklet helpful: “Something About
Interference.”
This is available at FCC local regional offices. Our company is not
responsible for any radio or television interference caused by
unauthorized modifications of this equipment or the substitution
or attachment of connecting cables and equipment other than
those specified by our company. The correction will be the
responsibility of the user. Use only shielded data cables with this
system.
Intentional emitter per FCC Part 15
(If fitted with 2.4G band or 5G band)
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4GHz/5GHz Band, may
be present (embedded) in your notebook system. This section is
only applicable if these devices are present. Refer to the system
label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for
use in the United States of America if an FCC ID number is on the
system label.
Chapter 5
Appendix
105
This device is restricted to indoor use due to its operation in the
5.15 to 5.25 GHz frequency range. FCC requires this product to be
used indoors for the frequency range 5.15 to 5.25 GHz to reduce
the potential for harmful interference to co-channel Mobile
Satellite systems. High power radars are allocated as primary users
of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar
stations can cause interference with and /or damage this device.
Operation of this device is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation of the device.
Wireless devices are not user serviceable. Do not modify
them in any way.
Modification to a wireless device will void the authorization
to use it. Contact manufacturer for service.
Chapter 5
Appendix
Regulatory Compliance Statements
FCC Part 68 (If fitted with a modem device.)
This equipment compiles with part of the FCC rules. On the
back of this equipment is a label that contains, among other
information, the FCC registration number and ringer equivalence
number (REN) for this equipment. If requested, this information
must be provided to the telephone company.
This equipment uses the following USOC jacks : RJ11C
An FCC compliant telephone cord and modular plug is provided
with this equipment. This equipment is designed to be connected
to the telephone network or promises wiring using a compatible
modular jack which is Part 68 compliant. See Installation
Instructions for details.
The REN is used to determine the quantity of devices which may
be connected to telephone line. Excessive RENs on the telephone
line may result in the devices not ringing in response to an
incoming call. In most, but not all areas, the sum of RENs should
not exceed five (5.0). To be certain of the number of devices that
may be connected to a line, as determined by total RENs, contact
the local telephone company to determine the maximum REN for
the calling area.
If the terminal equipment causes harm to the telephone network,
the Telephone Company will notify you in advance that temporary
discontinuance of service may be required. But if advance notice
is not practical, the telephone company will notify the customer
as soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities,
106
equipment, operations, or procedures that could affect the
operation of the equipment. If this happens, the telephone
company will provide advanced notice in order for you to make
necessary modifications to maintain uninterrupted service.
If trouble is experienced with this equipment (Modem) for repair
or warranty information, please contact your local distributor.
If the equipment is causing harm to the telephone network,
the telephone company may request that you disconnect the
equipment until the problem is resolved.
The user must use the accessories and cables supplied by the
manufacturer to get optimum performance from the product.
No repairs may be done by the customer.
This equipment cannot be used on public coin phone service
provided by the telephone company. Connection to party line
service is subject to state tariffs.
The Telephone Consumer Protection Act of 1991 makes it
unlawful for any person to use a computer or other electronic
device, including fax machines, to send any message unless such
message clearly contains in a margin at the top or bottom of
each transmitted page or on the first page of the transmission,
the date and time it is sent and an identification of the business
or other entity, or other individual sending the message and the
telephone number of the sending machine or such business, other
entity, or individual. (The telephone number provided may not
be any number for which charges exceed local or long-distance
transmission charges.)
In order to program this information into your fax machine, refer
to your communications software user manual.
Chapter 5
Appendix
Regulatory Compliance Statements
Canada
Unintentional Emitter per ICES-003
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus as set out in the radio
interference regulations of Industry Canada.
Le présent appareil numérique n’émet pas de bruits
radioĂŠlectriques dĂŠpassant les limitesapplicables aux appareils
numÊriques de Classe B prescrites dans le règlement sur le
brouillage radioĂŠlectrique ĂŠdictĂŠ par Industrie Canada.
Intentional Emitter per RSS 210
This device complies with RSS 210 of Industry Canada. Operation
is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of this
device.”
L‘ utilisation de ce dispositif est autorisée seulement aux
conditions suivantes : (1) il ne doit pas produire de brouillage et (2)
l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage
radioÊlectrique reçu, même si ce brouillage est susceptible de
compromettre le fonctionnement du dispositif.
107
The term “IC” before the equipment certification number only
signifies that the Industry Canada technical specifications were
met. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (EIRP) is not more than that required
for successful communication. To prevent radio interference
to the licensed service, this device is intended to be operated
indoors and away from windows to provide maximum shielding.
Equipment (or its transmit antenna) that is installed outdoors is
subject to licensing.
Pour empecher que cet appareil cause du brouillage au service
faisant l’objet d’une licence, il doit etre utilize a l’interieur et devrait
etre place loin des fenetres afin de Fournier un ecram de blindage
maximal. Si le matriel (ou son antenne d’emission) est installe a
l’exterieur, il doit faire l’objet d’une licence.
(If fitted with 2.4G band or 5G band)
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4GHz/5GHz Band, may
be present (embedded) in your notebook system. This section is
only applicable if these devices are present. Refer to the system
label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for
use in Canada if an Industry Canada ID number is on the system
label.
Chapter 5
Appendix
Regulatory Compliance Statements
When using IEEE 802.11a wireless LAN, this product is restricted to
indoor use due to its operation in the 5.15- to 5.25-GHz frequency
range. Industry Canada requires this product to be used indoors
for the frequency range of 5.15 GHz to 5.25 GHz to reduce the
potential for harmful interference to co-channel mobile satellite
systems. High power radar is allocated as the primary user of the
5.25- to 5.35-GHz and 5.65 to 5.85-GHz bands. These radar stations
can cause interference with and/or damage to this device.
The maximum allowed antenna gain for use with this device
is 6dBi in order to comply with the E.I.R.P limit for the 5.25- to
5.35 and 5.725 to 5.85 GHz frequency range in point-to-point
operation.
The power output of the wireless device (or devices), which may
be embedded in your notebook, is well below the RF exposure
limits as set by Industry Canada.
Operation of this device is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation of the device.
To prevent radio interference to licensed service, this device
is intended to be operated indoors and away from windows
to provide maximum shielding. Equipment (or its transmit
antenna) that is installed outdoors is subject to licensing.
Wireless devices are not user serviceable. Do not modify
them in any way. Modification to a wireless device will void
the authorization to use it. Contact manufacturer for service.
108
(Si l’appareil est équipé d’une bande 2,4 G ou 5 G)
Des dispositifs de basse puissance, de type radio LAN
(pĂŠriphĂŠriques de communication sans fil par radiofrĂŠquence
RF) fonctionnant sur une bande de 2.4GHz/5GHz sont peutĂŞtre intĂŠgrĂŠs dans votre appareil. Cette section est applicable
uniquement si ces dispositifs sont présents. Consultez l’étiquette
du système pour vÊrifiez la prÊsence de dispositifs sans fil.
Les dispositifs sans fil qui peuvent être intÊgrÊs dans votre système
sont uniquement aptes pour une utilisation au Canada si l’étiquette
du système présente un nombre d’identification d’Industrie
Canada.
En cas d’utilisation d’un LAN sans fil IEEE 802.11a, ce produit ne
peut être utilisé qu’à l’intérieur en raison de son fonctionnement
dans une plage des frĂŠquences allant de 5,15 Ă  5,25 GHz. Industrie
Canada exige l’utilisation de ce produit à l’intérieur pour une
plage des frĂŠquences allant de 5,15 Ă  5,25 GHz afin de rĂŠduire
les Êventuelles interfÊrences nuisibles avec les systèmes mobiles
par satellite du mĂŞme canal. Le radar de grande puissance est
considéré comme l’utilisateur principal des bandes de 5,25 à 5,35
GHz et de 5,65 Ă  5,85 GHz. Ces stations radar peuvent provoquer
des interférences avec ce périphérique et/ou l’endommager.
Le gain d’antenne maximum autorisé avec ce périphérique est
de 6 dBi afin de respecter la limite de P.I.R.E. pour une plage des
frĂŠquences de 5,25 Ă  5,35 GHz et de 5,725 Ă  5,85 GHz dans un
fonctionnement point Ă  point.
La sortie de puissance du dispositif sans fil (ou des dispositifs) qui
peut être intÊgrÊ dans votre système est bien infÊrieure aux limites
d’exposition de RF établies par Industrie Canada.
Regulatory Compliance Statements
Son utilisation est soumise aux deux conditions suivantes : 1) ce
dispositif ne peut pas provoquer d’interférences nuisibles et 2
2) ce dispositif doit accepter toute interfÊrence reçue, y compris
les interfĂŠrences qui peuvent provoquer des anomalies dans le
système.
Afin de prĂŠvenir des interfĂŠrences de radio au service
autorisé, ce dispositif est prévu pour être utilisé à l’intérieur et
ĂŠloignĂŠ des fenĂŞtres pour fournir une protection maximum.
Un ĂŠquipement (ou son antenne de transmission) qui est
installé à l’extérieur est sujet à une autorisation.
Les dispositifs sans fil ne peuvent pas ĂŞtre rĂŠparĂŠs par
l’utilisateur. Ne les modifiez en aucune façon. La modification
d’un dispositif sans fil annulera votre autorisation à son
utilisation. Contactez le fabricant pour la rĂŠparation.
Chapter 5
Appendix
109
Telecommunications per DOC notice
(for products fitted with an IC-compliant modem)
The Industry Canada label identifies certified equipment.
This certification means that the equipment meets certain
telecommunications network protective, operation, and safety
requirements. The Department does not guarantee the equipment
will operate to the users’ satisfaction.
Before installing this equipment, users should make sure that
it is permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be
installed using an acceptable method of connection. In some
cases, the inside wiring associated with a single-line individual
service may be extended by means of a certified connector
assembly. The customer should be aware that compliance with
the above conditions may not prevent degradation of service in
some situations.
Repairs to certified equipment should be made by an authorized
Canadian maintenance facility designated by the supplier. Any
repairs or alterations made by the user to this equipment, or
equipment malfunctions, may give the telecommunications
company cause to request the user to disconnect the equipment.
Users should make sure, for their own protection, that the
electrical ground connections of the power utility, telephone lines,
and internal metallic water pipe system, if present, are connected
together. This precaution may be particularly important in rural
areas.
Regulatory Compliance Statements
To avoid electrical shock or equipment malfunction do not
attempt to make electrical ground connections by yourself.
Contact the appropriate inspection authority or an electrician,
as appropriate.
The Ringer Equivalence Number (REN) assigned to each
terminal device provides an indication of the maximum number
of terminals allowed to be connected to a telephone interface.
The termination on an interface may consist of any combination of
devices subject only to the requirement that the sum of the Ringer
Equivalence Numbers of all the devices does not exceed 5.
DĂŠclarations sur les tĂŠlĂŠcommunications selon DOC
(pour des produits munis d’un modem homologué par
la IC)
L’étiquette d’Industrie Canada identifie un équipement autorisé.
Cette autorisation signifie que l’équipement satisfait certaines
exigences pour la sĂŠcuritĂŠ, fonctionnement et protection des
rĂŠseaux tĂŠlĂŠphoniques. Le dĂŠpartement ne garantie pas que
l’équipement fonctionne comme le désirerait l’utilisateur.
Avant d’installer l’équipement, les utilisateurs doivent s’assurer
que leur connexion aux installations de la compagnie de
tĂŠlĂŠcommunication locale soit permise.
L’équipement doit être également installé selon une méthode
acceptable de connexion. Dans certains cas, l’installation
ĂŠlectrique associĂŠe Ă  un service de ligne individuel peut ĂŞtre
Chapter 5
Appendix
110
rallongĂŠ par un connecteur homologuĂŠ. Le client doit savoir que
la conformitĂŠ aux conditions prĂŠcĂŠdentes ne garantit pas un
fonctionnement parfait dans toutes les situations.
Les réparations de l’équipement homologué doivent être
effectuĂŠes dans les installations de maintenance canadiennes
autorisĂŠes par le fournisseur. Les rĂŠparations ou modifications
effectuées par l’utilisateur sur cet équipement, ou anomalies
de l’équipement, peuvent faire que la compagnie de
télécommunication demande la déconnexion de l’équipement.
Les utilisateurs doivent s’assurer, pour leur propre protection, que
les raccordements ĂŠlectriques Ă  la terre, les lignes de tĂŠlĂŠphone
et l’infrastructure de la conduite d’eau, si il y en a, sont connectés
ensemble. Cette prÊcaution peut être particulièrement importante
dans les zones rurales.
Afin d’éviter une électrocution ou le disfonctionnement
de l’équipement, n’essayez pas de faire vous-même les
raccordements électriques à la terre. Contactez l’autorité
inspectrice adĂŠquate ou un ĂŠlectricien, selon il conviendra.
Le Numéro d’équivalence d’appel (REN) attribué à chaque
dispositif terminal fourni une indication du nombre maximum
de terminales qui peuvent ĂŞtre connectĂŠes Ă  une interface
téléphonique. Le bout d’une interface peut contenir n’importe
quelle combinaison de dispositifs sujets uniquement Ă  la
condition que le total des numéros d’équivalence d’appel de tous
les dispositifs ne dĂŠpasse pas 5.
Chapter 5
Appendix
Regulatory Compliance Statements
Brazil
Este equipamento opera em carĂĄter secundĂĄrio, isto ĂŠ, nĂŁo
tem direito a proteção contra interferência prejudicial, mesmo
de estaçþes do mesmo tipo, e não pode causar interferência a
sistemas operando em carĂĄter primĂĄrio.
European Union
111
European Directives
This Information Technology Equipment has been tested and
found to comply with the following European directives:
EMC Directive 2004/108/EC
Low Voltage Directive 2006/95/EC
R&TTE Directive 1999/5/EC
Manufacturer Information
Samsung Electronics Co., Ltd.
European Union CE Marking and Compliance Notices
Products intended for sale within the European Union are marked
with the ConformitĂŠ EuropĂŠene (CE) Marking, which indicates
compliance with the applicable Directives and European standards
and amendments identified below. This equipment also carries
the Class 2 identifier.
The following information is only applicable to systems labeled
with the CE mark
416, Maetan-3Dong, Yeongtong-Gu, Suwon-City, Gyeonggi-Do,
443-742, Korea
Samsung Electronics Suzhou Computer Co., Ltd.
No. 198, Fangzhou Road, Suzhou Industrial Park, Jiangsu Province,
215021, China
Tel: +86-512-6253-8988
For the web or the phone number of Samsung Service Centre, see
the Warranty or contact the retailer where you purchased your
product.
Chapter 5
Appendix
Regulatory Compliance Statements
European Radio Approval Information
(for products fitted with EU-approved radio devices)
This Product is a Notebook computer; low power, Radio LAN type
devices (radio frequency (RF) wireless communication devices),
operating in the 2.4GHz/5GHz band, may be present (embedded)
in your notebook system which is intended for home or office use.
This section is only applicable if these devices are present. Refer to
the system label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for
use in the European Union or associated areas if a CE mark
with a Notified Body Registration Number and the Alert Symbol is
on the system label.
The power output of the wireless device or devices that may be
embedded in you notebook is well below the RF exposure limits
as set by the European Commission through the R&TTE directive.
112
EU R&TTE Compliance Statements
Česky
[Czech]
Samsung tĂ­mto prohlaĹĄuje, Ĺže tento Notebook
PC je ve shodě se základními požadavky a
dalšími příslušnými ustanoveními směrnice
1999/5/ES.
Dansk
[Danish]
Undertegnede Samsung erklĂŚrer herved, at
følgende udstyr Notebook PC overholder de
vÌsentlige krav og øvrige relevante krav i
direktiv 1999/5/EF.
Deutsch
[German]
Hiermit erklärt Samsung, dass sich das Gerät
Notebook PC in Übereinstimmung mit den
grundlegenden Anforderungen und den
ßbrigen einschlägigen Bestimmungen der
Richtlinie 1999/5/EG befindet.
Eesti
[Estonian]
Käesolevaga kinnitab Samsung seadme
Notebook PC vastavust direktiivi 1999/5/
EÜ põhinõuetele ja nimetatud direktiivist
tulenevatele teistele asjakohastele sätetele.
English
Hereby, Samsung, declares that this Notebook
PC is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
EspaĂąol
[Spanish]
Por medio de la presente Samsung declara
que el Notebook PC cumple con los requisitos
esenciales y cualesquiera otras disposiciones
aplicables o exigibles de la Directiva 1999/5/CE.
The low band 5.15 - 5.35 GHz is for indoor use only.
See 802.11b and 802.11g restrictions for specific countries
or regions within countries under the heading “European
Economic Area Restrictions” below.
Chapter 5
Appendix
Regulatory Compliance Statements
113
Ελληνική
[Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Samsung ΔΗΛΩΝΕΙ ΟΤΙ
Notebook PC ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ
ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ
ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
AlulĂ­rott, Samsung nyilatkozom, hogy a
Magyar
Notebook PC megfelel a vonatkozĂł alapvetĂľ
[Hungarian] kĂśvetelmĂŠnyeknek ĂŠs az 1999/5/EC irĂĄnyelv
egyÊb elþíråsainak.
Français
[French]
Par la présente Samsung déclare que l’appareil
Notebook PC est conforme aux exigences
essentielles et aux autres dispositions
pertinentes de la directive 1999/5/CE.
Polski
[Polish]
Italiano
[Italian]
Con la presente Samsung dichiara che questo
Notebook PC è conforme ai requisiti essenziali
ed alle altre disposizioni pertinenti stabilite
dalla direttiva 1999/5/CE.
Latviski
[Latvian]
Ar šo Samsung deklarē, ka Notebook PC atbilst
Direktčvas 1999/5/EK bōtiskajām prasčbām un
citiem ar to saistÄŤtajiem noteikumiem.
Ĺ iuo Samsung deklaruoja, kad ĹĄis Notebook PC
LietuviĹł
atitinka esminius reikalavimus ir kitas 1999/5/
[Lithuanian]
EB Direktyvos nuostatas.
Nederlands
[Dutch]
Malti
[Maltese]
Hierbij verklaart Samsung dat het toestel
Notebook PC in overeenstemming is met
de essentiĂŤle eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG.
Hawnhekk, Samsung, jiddikjara li dan
Notebook PC jikkonforma mal-ħtiāijiet
essenzjali u ma provvedimenti oħrajn relevanti
li hemm fid-Dirrettiva 1999/5/EC.
Niniejszym Samsung oświadcza, Ŝe Notebook
PC jest zgodny z zasadniczymi wymogami oraz
pozostałymi stosownymi postanowieniami
Dyrektywy 1999/5/EC.
Samsung declara que este Notebook PC estĂĄ
PortuguĂŞs
conforme com os requisitos essenciais e outras
[Portuguese]
disposiçþes da Directiva 1999/5/CE.
Slovensko
[Slovenian]
Samsung izjavlja, da je ta Notebook PC v skladu
z bistvenimi zahtevami in ostalimi relevantnimi
določili direktive 1999/5/ES.
Slovensky
[Slovak]
Samsung týmto vyhlasuje, Şe Notebook PC
spĺňa zåkladnÊ poŞiadavky a vťetky prísluťnÊ
ustanovenia Smernice 1999/5/ES.
Suomi
[Finnish]
Samsung vakuuttaa täten että Notebook
PC tyyppinen laite on direktiivin 1999/5/
EY oleellisten vaatimusten ja sitä koskevien
direktiivin muiden ehtojen mukainen.
Svenska
[Swedish]
Härmed intygar Samsung att denna Notebook
PC stür I Üverensstämmelse med de väsentliga
egenskapskrav och Ăśvriga relevanta
bestämmelser som framgür av direktiv 1999/5/
EG.
Chapter 5
Appendix
Regulatory Compliance Statements
Íslenska
[Icelandic]
HÊr með lýsir Samsung yfir Því að Notebook PC
er Ă­ samrĂŚmi viĂ° grunnkrĂśfur og aĂ°rar krĂśfur,
sem gerĂ°ar eru Ă­ tilskipun 1999/5/EC.
Samsung erklĂŚrer herved at utstyret Notebook
Norsk
PC er i samsvar med de grunnleggende krav og
[Norwegian]
øvrige relevante krav i direktiv 1999/5/EF.
TĂźrkiye
[Tßrkçe]
Bu belge ile, Samsung bu Notebook PC’nin
1999/5/EC Yönetmeliğinin temel gerekliliklerine
ve ilgili hükümlerine uygun olduğunu beyan
eder.
To view the EU Declaration of Conformity for this product (in
English only), go to: http://www.samsung.com/uk/support/
download/supportDownMain.do then search the model number
of the product.
If the Declaration of Conformity for the model you are interested
in is not available on our web-site, please contact your distributor.
114
European Economic Area Restrictions
Local Restriction of 802.11b/802.11g Radio Usage
[Note to integrator: The following statements on local restrictions
must be published in all end-user documentation provided with
the system or product incorporating the wireless product.]
Due to the fact that the frequencies used by 802.11b/802.11g
wireless LAN devices may not yet be harmonized in all
countries, 802.11b/802.11g products are designed for use
only in specific countries or regions, and are not allowed
to be operated in countries or regions other than those of
designated use.
As a user of these products, you are responsible for ensuring
that the products are used only in the countries or regions
for which they were intended and for verifying that they
are configured with the correct selection of frequency and
channel for the country or region of use. Any deviation from
permissible settings and restrictions in the country or region
of use could be an infringement of local law and may be
punished as such.
Chapter 5
Appendix
Regulatory Compliance Statements
The European variant is intended for use throughout the European
Economic Area. However, authorization for use is further restricted
in particular countries or regions within countries, as follows:
France
General
2.400 - 2.454 GHz (channels 1 to 7) for outdoor use.
European standards dictate maximum radiated transmit power
of 100 mW effective isotropic radiated power (EIRP) and the
frequency range 2400 – 2483.5 MHz.
For Guadeloupe, Martinique, St Pierre et Miquelon, Mayotte:
The low band 5.15 - 5.35 GHz is for indoor use only.
For Metropolitan departments:
2.400 - 2.4835 GHz for indoor use.
2.400 - 2.4835 GHz for indoor and outdoor use.
For Reunion, Guyane:
Belgium
2.400 - 2.4835 GHz for indoor use.
The product may be used outdoors, but for outdoor transmissions
over a distance of 300m or more, a license from the BIPT is
required.
2.420 - 2.4835 GHz for outdoor use (channels 5 to 13)
This restriction should be indicated in the manual as follows:
Dans le cas d’une utilisation privée, à l’extérieur d’un bâtiment, audessus d’un espace public, aucun enregistrement n’est nécessaire
pour une distance de moins de 300m. Pour une distance
supérieure à 300m un enregistrement auprès de l’IBPT est requise.
Pour une utilisation publique à l’extérieur de bâtiments, une
licence de l’IBPT est requise. Pour les enregistrements et licences,
veuillez contacter l’IBPT.
The low band 5.15 - 5.35 GHz is for indoor use only.
115
Regulatory Compliance Statements
European Telecommunication Information
(for products fitted with EU-approved modems)
Marking by the symbol
indicates compliance of this equipment
to the Radio and Telecom Terminal Equipment Directive 1999/5/
EC. Such marking is indicative that this equipment meets or
exceeds the following technical standards:
CTR 21 - Attachment requirements for pan-European approval for
connection to the analogue Public Switched Telephone Networks
(PSTNs) of TE (excluding TE supporting voice telephony services) in
which network addressing, if provided, is by means of Dual Tone
Multi-Frequency (DTMF) signaling.
Although this equipment can use either loop disconnect
(pulse) or DTMF (tone) signaling, only the performance of
the DTMF signaling is subject to regulatory requirements for
correct operation.
It is therefore strongly recommended that the equipment
is set to use DTMF signaling for access to public or private
emergency services. DTMF signaling also provides faster call
setup.
Chapter 5
Appendix
116
This equipment has been approved to Council Decision 98/482/
EEC - “CTR 21” for Pan-European single terminal connection to the
Public Switched Telephone Network (PSTN).
However, due to differences between the individual PSTNs
provided in different countries, the approval does not, of itself,
give an unconditional assurance of successful operation on every
PSTN termination point. In the event of problems, you should
contact manufacturer Technical Support.
Chapter 5
Appendix
WEEE Symbol Information
Correct disposal of this product
(Waste Electrical & Electronic Equipment)
117
Correct disposal of batteries in this product
Pb
(Applicable in the European Union and other European
countries with separate collection systems)
(Applicable in the European Union and other European
countries with separate battery return systems.)
This marking on the product, accessories or literature indicates that
the product and its electronic accessories (e.g. charger, headset, USB
cable) should not be disposed of with other household waste at the
end of their working life.
This marking on the battery, manual or packaging indicates that
the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked,
the chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances
can cause harm to human health or the environment.
To prevent possible harm to the environment or human health
from uncontrolled waste disposal, please separate these items from
other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details
of where and how they can take these items for environmentally safe
recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for
disposal.
To protect natural resources and to promote material re-use, please
separate batteries from other types of waste and recycle them
through your local, free battery return system.
USA ONLY
This Perchlorate warning applies only to primary CR (Maganese
Dioxide) Lithium coin cells in the product sold or distributed ONLY in
California USA.
“Perchlorate Material- special handling may apply, See www.dtsc.
ca.gov/hazardouswaste/perchlorate.”
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect Or call, (877) 278-0799
Product Specifications
Chapter 5
Appendix
118
The system specifications may differ depending on the derived
models.
For detailed system specifications, refer to the product catalogue.
CPU (Optional)
Intel® Dual-Core™ i5/i7 Processor
Intel® Quad-Core™ i7 Processor
t Optional components may not be provided or different
components may be provided depending on the computer
model.
Main Memory
Memory type: DDR3 SODIMM
t The system specifications are subject to change without
notice.
Main Chipset
Intel HM65
Storage Device
9.5mmH SATA HDD
t The hard disk drive capacity of a computer in which
Samsung Recovery Solution is installed, is represented as
smaller than the product specification.
AMD Radeon HD 6490M (PowerXpress)
Graphics (Optional)
AMD Radeon HD 6750M (PowerXpress)
Intel HD Graphics 3000 (Internal)
Operating
Environment
Temperature: -5~40°C for storage,
10~32°C when operating
Humidity: 5~90% for storage,
20~80% when operating
AC/DC Rating
(Optional)
Input: 100-240VAC, 50/60Hz,
PC Rating (Optional)
19VDC 3.16A (60W), 19VDC 4.74A (90W)
Output: 19VDC 3.16A, 19VDC 4.74A
t For models without a memory compartment cover, please
consult the service center to replace or upgrade the
memory.
t The amount of memory that Windows can use may be
smaller than the actual amount of memory available.
Chapter 5
Appendix
Product Specifications
Registered Trademarks
Samsung is a registered trademark of Samsung Co., Ltd.
Intel, Pentium/Dual-Core/Quad-Core are registered trademarks of
the Intel Corporation.
AMD, Dual-Core/Quad-Core are registered trademarks of the AMD
Corporation.
Microsoft, MS-DOS, and Windows are registered trademarks of the
Microsoft Corporation.
All other product or company names mentioned herein are
registered trademarks of their respective companies.
119
ENERGY STARÂŽ Partner
As an ENERGY STARÂŽ Partner, SAMSUNG has
determined that this product meets the ENERGY STARÂŽ
guidelines for energy efficiency.
Chapter 5
Appendix
Glossary
120
The Glossary lists the terminologies used in this User Guide. For terminologies other than these, look in Windows Help.
Backup
DHCP (Dynamic Host Configuration Protocol)
A way to save the current data to restore it later if necessary.
A backup is a way to restore computer data when the data or
computer is damaged.
This refers to automatically allocating IP addresses to the users on
the network by the network administrators.
Chargeable USB
An application interface developed to enable Windows application
programs to access hardware devices at a very high speed. Since
the operating speed of graphics, memory and sound cards must be
very fast to provide high quality video and sound for games, Direct
X enables faster control and interaction between applications and
hardware devices. By using Direct X, the multimedia performance
of Windows has been hugely improved.
This program enables supplying power to a specific USB port when
the system is in power saving mode, hibernation mode or off.
Client
This refers to a computer that uses a shared network resource
provided by a server.
DDR SDRAM
(Double Data Rate Synchronous Dynamic Random Access Memory)
DRAM is a memory type whose cells consist of a capacitor and
transistor manufactured at a low price. SDRAM is a memory type
whose performance has been improved by synchronizing the clock
with the external CPU clock. DDR SDRAM is a memory type whose
performance has been improved by doubling the operating speed
of the SDRAM and is widely used nowadays. This computer uses
DDR SDRAM.
Device Manager
An administrative tool used to manage computer devices. You can
add or remove hardware or update a device driver using the Device
Manager.
Direct X
Driver
Software that interacts between the hardware and the operating
system. An operating system knows the hardware information
and controls the hardware. In general, a driver is supplied with the
corresponding hardware device.
D-sub (D-subminiature)
This is the cable connecting a general CRT monitor and the
computer. Analog video is output through this cable.
Chapter 5
Appendix
Glossary
121
DVD (Digital Versatile Disk)
Icon
DVD was developed to replace CD (compact disk). Although the
shape and size of the disc are the same as that of a CD, the capacity
of a DVD is at least 4.7GB while the capacity of a CD is 600MB. DVD
video is digital unlike VHS (analog) video and supports MPEG2
compression and digital audio. To play a DVD, a DVD drive is
required.
This refers to a small image that represents a file that users can use.
Firewall
A communications network connecting computers, printers and
other devices within a local area such as within a building. A LAN
enables all connected devices to interact with other devices on the
network. The current LAN uses the Ethernet media access control
method developed in the early 1980s. To connect to an Ethernet, a
network card called a LAN card, Ethernet card or network interface
card is required. To exchange data between computers, a protocol
is required besides the hardware equipment. Windows Vista uses
TCP/IP as the default protocol.
A security system used to protect an internal network or intranet
from external networks through an authentication procedure.
HDMI
This is a digital video / audio interface specification that transmits
video and audio signals over a single cable.
Hibernation Mode
A power mode that saves all data in memory to the hard disk and
turns the CPU and hard disk off. When canceling Hibernation Mode,
all application programs that were running are restored to their last
state.
IEEE802.XX
This is a set fo specifications developed by the 802 committee of
IEEE for the LAN connection method called XX.
LAN (Local Area Network)
LCD (Liquid Crystal Display)
There are Passive Matrix and Active Matrix LCD types. This
computer uses the Active Matrix type LCD called a TFT LCD. Since
an LCD is implemented by transistors instead of a cathode-ray tube
unlike a CRT, its size can be slim. And because it does not blink, it
reduces eye strain.
Chapter 5
Appendix
Glossary
MMC (MultiMedia Card) card
This is an external-type flash memory used for mobile devices such
as mobile phones or digital cameras.
Network
A group of computers and devices, such as printers and scanners,
connected by a communications link. A network can be either
small or large and can be connected permanently through cables
or temporarily through telephone lines or wireless links. The
biggest network is the Internet, a worldwide network.
Network Administrator
A user who plans, configures and manages network operations.
Sometimes, a network administrator is called a system
administrator.
Notification Area
This refers to the right area of the Taskbar including program icons
such as the volume control, the power options and the time.
Partition
This refers to the act or practice of dividing the storage space of
a hard disk drive into separate data areas known as partitions. If a
100GB hard disk drive is partitioned into 2 x 50GB partitions, the
hard disk drive can be used as if there are 2 hard disk drives.
122
PCMCIA( Personal Computer Memory Card International
Association) card
This is an extended card slot specification for mobile computers
such as a notebook computer. Not only a memory, device but also
most peripherals such as hard disk drives, LAN cards, etc. can be
connected to this card slot.
Protocol
A protocol is a set of rules used by computers to communicate with
each other across a network. A protocol is a convention or standard
that controls or enables the connection, communication, and
data transfer between computing endpoints. It defines the data
transmission procedures and the transmission medium for more
efficient network functions.
Quick Launch
This refers to a toolbar that can be configured so that you can
launch a program such as Internet Explorer or display the Windows
Desktop with one click. You can add any icon to the quick launch
area of the Taskbar and launch frequently used program by clicking
that icon.
SD (Secure Digital) card
An SD card is a flash (non-volatile) memory card developed for
mobile devices by improving on the MMC card. Although an MMC
card can be used in an SD card slot, an SD card is not recognized
when inserted into an MMC card.
Chapter 5
Appendix
Glossary
123
SDHC (Secure Digital High Capacity) card
TCP/IPv4
This is the extension of the SD card that supports over 2GB bytes.
This is a 4 byte (32 bit) address system separated into each byte
(8 bits) by a dot and each byte is represented as a decimal number.
Server
In general, a server refers to a computer that provides shared
resources for network users.
Share
This refers to setting a resource of a computer such as a folder or
printer so that other users can also use it.
Shared Folder
A folder that can be used by other users on the network.
Sleep Mode
A power mode that enables computers to save power consumption
when they are not being used. When a computer is in Sleep Mode,
the data on the computer memory is not saved to the hard disk. If
the power is turned off, the data in memory will be lost.
System File
System Files refer to files that are read and used by the Windows
operating system. In general, system files must not be deleted or
moved.
USB (Universal Serial Bus)
This refers to a serial interface standard developed to replace the
conventional interface standards such as Serial and PS/2.
The data transmission specifications are one of the interface
standards used to connect a computer to peripheral devices.
These specifications include USB 1.0, 1.1, 2.0 and 3.0.
It is appropriate to support peripheral devices that require high
data rates such as an AV device, secondary HDD or CD-RW.
The higher the version (e.g. USB 3.0), the higher the data rate
provided.
Virtual XP Mode
This is a virtual operating system that enables running Windows XP
programs on the Windows 7 operating system. Using this mode,
you can run programs that do not run on Windows 7.
Windows Media Player
A multimedia program included with Windows. Using this
program, you can play a media file, create an audio CD, listen to a
radio broadcast, search and manage media files, and copy files to a
portable device, etc.
Chapter 5
Appendix
Index
AP
61
Memory
75
Monitor Connection / Output
47
Multi Card Slot
44
Status Indicators
26
Supervisor Password
71
Touchpad
Battery
78
BIOS Setup
69
Booting Priority
74
Overview
25
72
CD Drive
42
Password
Charge
78
Product Specifications
Click
37
71
118
Recorder
Double-Click
37
Drag
37
Dual View
48
Safety Precautions
66
Volume Control
54
LCD Brightness
36
User Password
124
54
Samsung Recovery Solution
85
Scroll
39
Security Slot
83
Shortcut Key
33
Wired Network
57
Wireless Network
61

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 29418
Create Date                     : 2011:09:30 14:45:29-07:00
GTS PDFX Conformance            : PDF/X-3:2002
GTS PDFX Version                : PDF/X-3:2002
Modify Date                     : 2011:09:30 14:45:29-07:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Instance ID                     : uuid:edd14842-6089-4495-8f31-ef2286010b7d
Document ID                     : adobe:docid:indd:20fca102-b2ab-11e0-aa7d-a42c0bc30a14
Rendition Class                 : proof:pdf
Derived From Instance ID        : 254ff7a8-b2a1-11e0-aa7d-a42c0bc30a14
Derived From Document ID        : adobe:docid:indd:254ff7a7-b2a1-11e0-aa7d-a42c0bc30a14
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 180.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 180.00, 180.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 180.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 180.00, 180.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:50D66381170DDE119FB2F53A11564CCC, uuid:9b818aae-2f40-486a-aa88-2743822df6cb, uuid:FA9F4869AD7DDE11A22ADD1E4CB69882, uuid:B7376369865DDD11B56CD2C4DD843A9D, uuid:9A62BBAA105DDD118948C3EFE9EF1DC7, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:f0702652-a9fb-487a-82f5-e46144651901, uuid:9002631CBB4DDF11AA1DEBFC72BE3CDC, uuid:B8376369865DDD11B56CD2C4DD843A9D, uuid:37BDAFEF7C61DD118ED2DF6B07DDBD52, uuid:9102631CBB4DDF11AA1DEBFC72BE3CDC, uuid:CB49B275D163DF11B65D9A37D0CC8287, xmp.iid:3CC95DE6D5F5DF118B0090E611470256, uuid:9762BBAA105DDD118948C3EFE9EF1DC7, uuid:F9A351C2135DDD118948C3EFE9EF1DC7, uuid:FAA351C2135DDD118948C3EFE9EF1DC7, uuid:E512656FF45DDD11A37DBA2AF6BA68C1, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:6BD4ECD01A24DE119ECDD15A8DF3F2D4, uuid:46E0C53B1F0ADE11A2758F8DBE5E495F, uuid:9b818aae-2f40-486a-aa88-2743822df6cb, uuid:DEF02B1FA663DF1194E3F2D364023C51, uuid:DEF02B1FA663DF1194E3F2D364023C51, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:c7d33f82-2b36-4d81-9bd2-48fc1d317d80, uuid:7ab47244-c23f-4e0a-8c4d-3111cc767b5b, uuid:BB503195C8A8DE119B65D57C02A21B59, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:46988746-9e3c-46bb-9c7a-82e32609429a, uuid:3987d4a5-3f10-431a-865d-080563cc52a3, uuid:7c3c90f1-d91f-44ee-b088-870652232cce, uuid:24eeefff-e488-403f-8cfa-4ab730ee2078, uuid:b8ea18cb-504a-4154-b8da-b8ef2fd59369, uuid:989c46cf-c5d2-4341-8ba5-be6c70e80d0b, uuid:b5fc1898-1d76-4e1d-8274-37f526311f49, uuid:5efd9f7c-d7c3-459d-b9af-ae7f64621ffe, uuid:3acd572f-8649-49bf-a3f0-852f2cf44df0, uuid:27f62aa4-b669-4ed9-8560-4a165f354810, uuid:d85faea7-c5ee-497f-849b-a17d228c767f, uuid:0e42b5cf-0b70-4eaf-8b53-2949218efe5d, uuid:cb585287-df73-45eb-b535-1320dca66e68, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:14268c94-dacc-48fa-b81d-eba97a6e60fc, uuid:b39b12f2-5bff-4899-a9e3-6fecf530d39a, uuid:14268c94-dacc-48fa-b81d-eba97a6e60fc, uuid:b39b12f2-5bff-4899-a9e3-6fecf530d39a, uuid:a7a9f58f-a1c1-433e-80bb-cb4684280f1a, uuid:e7af20ac-8c4e-46c4-96c3-b85f97bd6e79, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:4178ab7b-58a7-45ab-94cf-a90c646b30c0, uuid:880fc7ea-5c03-4d30-b6cc-b38f17476425, uuid:27883b7d-dc6c-4aef-8a1b-80e1152e8b14, uuid:fde73805-d3e5-4bbd-8069-8fcbef5186a8, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, xmp.iid:1973521685A0E011B7198739BE39B06E, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:3127449CC8BEDE1190A4AAEBDF3C361D, xmp.iid:68CCBAF984A0E011B7198739BE39B06E, xmp.iid:68CCBAF984A0E011B7198739BE39B06E, uuid:686fe53f-c836-4eca-ba34-32348bf92b34, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:97cbac9d-80d3-4762-8d35-288ddfc8e3b7, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, xmp.iid:771941BE4DF0DF119973900313DAB192, xmp.iid:771941BE4DF0DF119973900313DAB192, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, xmp.iid:771941BE4DF0DF119973900313DAB192, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:27acaa5f-ad85-467b-bfec-91773d3b12b7, uuid:27acaa5f-ad85-467b-bfec-91773d3b12b7, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287
Manifest Reference Document ID  : uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:4ED66381170DDE119FB2F53A11564CCC, uuid:885a3b87-c02a-4f23-b9b9-ebf68bf4d261, uuid:4BD66381170DDE119FB2F53A11564CCC, uuid:3CCDE7E195EEDC11BD21C9977B4828CB, uuid:40CDE7E195EEDC11BD21C9977B4828CB, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:7e905469-81e4-4b00-8d2b-5fb2a91afc74, uuid:8F02631CBB4DDF11AA1DEBFC72BE3CDC, uuid:5D456E4E7EECDC11A85B862B884043FF, uuid:3ACDE7E195EEDC11BD21C9977B4828CB, uuid:63456E4E7EECDC11A85B862B884043FF, uuid:CA49B275D163DF11B65D9A37D0CC8287, xmp.did:3CC95DE6D5F5DF118B0090E611470256, uuid:8A60B108A4ECDC11A85B862B884043FF, uuid:C66E0A98EBECDC118CE9940DE860D2B0, uuid:CB6E0A98EBECDC118CE9940DE860D2B0, uuid:ABC4BBFACDF0DC119D69EF9D6B367C93, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:69D4ECD01A24DE119ECDD15A8DF3F2D4, uuid:45E0C53B1F0ADE11A2758F8DBE5E495F, uuid:885a3b87-c02a-4f23-b9b9-ebf68bf4d261, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:7DFECBE25A20DC11B0DEE7A943A14516, uuid:885a3b87-c02a-4f23-b9b9-ebf68bf4d261, uuid:9C209E58B4A8DE11BF59D0092434A19B, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:8462C7888410E011B5638655B8DDBDFA, uuid:8262C7888410E011B5638655B8DDBDFA, uuid:8262C7888410E011B5638655B8DDBDFA, uuid:8262C7888410E011B5638655B8DDBDFA, uuid:8262C7888410E011B5638655B8DDBDFA, uuid:8262C7888410E011B5638655B8DDBDFA, uuid:8262C7888410E011B5638655B8DDBDFA, uuid:8262C7888410E011B5638655B8DDBDFA, uuid:8262C7888410E011B5638655B8DDBDFA, uuid:8262C7888410E011B5638655B8DDBDFA, uuid:8262C7888410E011B5638655B8DDBDFA, uuid:8262C7888410E011B5638655B8DDBDFA, uuid:8262C7888410E011B5638655B8DDBDFA, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:D77E464C6411E0119F61930F6B8DC266, uuid:DB7E464C6411E0119F61930F6B8DC266, uuid:D77E464C6411E0119F61930F6B8DC266, uuid:DB7E464C6411E0119F61930F6B8DC266, uuid:DE7E464C6411E0119F61930F6B8DC266, uuid:E07E464C6411E0119F61930F6B8DC266, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:BF138F626111E0119ED4E665EAFEE37D, uuid:C1138F626111E0119ED4E665EAFEE37D, uuid:47B034C1F9A0DF11A63699A3F9879F8E, uuid:BD138F626111E0119ED4E665EAFEE37D, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, xmp.did:68D508445CA0E011A864B7CDBF335B8A, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, adobe:docid:photoshop:11fbd3b9-fbeb-11dc-85c9-ce516edbc2be, xmp.did:62D508445CA0E011A864B7CDBF335B8A, xmp.did:62D508445CA0E011A864B7CDBF335B8A, uuid:82eb47bb-1ed6-46f5-b4cf-18bf80faf42d, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:8262C7888410E011B5638655B8DDBDFA, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, xmp.did:771941BE4DF0DF119973900313DAB192, xmp.did:771941BE4DF0DF119973900313DAB192, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, xmp.did:771941BE4DF0DF119973900313DAB192, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:e1f3931a-bd62-49e3-818f-1a2b997d556b, uuid:e1f3931a-bd62-49e3-818f-1a2b997d556b, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287
Metadata Date                   : 2011:08:10 10:27:25+09:00
Creator Tool                    : Adobe InDesign CS3 (5.0.4)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 7710 bytes, use -b option to extract)
Format                          : application/pdf
Title                           : Nike_eng.indb
Creator                         : 29418
Producer                        : Acrobat Distiller 9.3.3 (Windows)
Trapped                         : False
Page Count                      : 125

EXIF Metadata provided by EXIF.tools