Samsung Electronics Co AT50L7 DLP Projection TV User Manual BP68 00352A 00 cover
Samsung Electronics Co Ltd DLP Projection TV BP68 00352A 00 cover
Contents
- 1. Users Manual 1
- 2. Users Manual 2
Users Manual 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 422605 |
| Application ID | KjdfuZv21k3hWyZPvTQ3SA== |
| Document Description | Users Manual 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 269.96kB (3374534 bits) |
| Date Submitted | 2004-05-13 00:00:00 |
| Date Available | 2004-05-13 00:00:00 |
| Creation Date | 2004-05-06 13:09:01 |
| Producing Software | Acrobat Distiller 4.0 for Macintosh |
| Document Lastmod | 2004-05-06 13:09:13 |
| Document Title | BP68-00352A-00(cover) |
| Document Creator | QuarkXPress 4.1_ENG: AdobePS 8.8.0 (301) |
| Document Author: | so |
DLPTV DLPTV 1-800-SAMSUNG (1-800-726-7864) Samsung Electronics America Service Division 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 www.samsungusa.com Samsung Electronics Canada Inc. Samsung Customer Care 7037 Financial Drive Mississauga, Ontario L5N 6R3 www.samsung.ca BP68-00352A-00 I N S T R U C T I O N M A N U A L HL-P5085W/HL-P5685W This device is a Class B digital apparatus. Table of Contents Your New Wide TV ............................................................................................6 Special Features ...............................................................................................46 Replacing the Lamp ................................................................................................6 List of Features .......................................................................................................8 Accessories ...........................................................................................................8 Front Panel Buttons .................................................................................................9 Front Panel Information Window............................................................................10 Rear Panel Jacks ..................................................................................................11 Remote Control ....................................................................................................12 Installing Batteries in the Remote Control.....................................................13 Customizing Your Remote Control ..........................................................................46 Remote Control Codes ..........................................................................................47 Fine Tuning Channels ...........................................................................................48 LNA (Low Noise Amplifier)....................................................................................49 Selecting the Color Tone .......................................................................................50 Changing the Picture Size .....................................................................................51 Digital Noise Reduction ........................................................................................52 ...........................................................53 DNIeTM (Digital Natural Image engine) Setting the MCC (My Color Control) Mode .............................................................54 Setting the Film Mode...........................................................................................56 Viewing Picture-In-Picture.......................................................................................57 Activating the PIP .....................................................................................57 Selecting an External Source .....................................................................58 Swapping the Sub Picture and Main Picture ................................................59 Changing the Size of the Sub Picture .........................................................60 Changing the Location of the Sub Picture....................................................61 Changing the Channel of the Sub Picture....................................................62 Selecting the Sound Source .......................................................................63 Setting the SRS TSXT.............................................................................................64 Choosing a Multi-Channel Sound (MTS) track..........................................................65 Auto Volume ........................................................................................................66 Enjoying the Sound of External Speakers ................................................................67 Using the V-Chip (USA).........................................................................................68 Viewing Closed Caption Information ......................................................................74 Setting the Blue Screen Mode................................................................................76 Setting The On/Off Melody ..................................................................................77 Using the Color Weakness Enhancement Feature .....................................................78 Connections .....................................................................................................16 Connecting VHF and UHF Antennas.......................................................................16 Antennas with 300-ohm Flat Twin Leads .....................................................16 Antennas with 75-ohm Round Leads ...........................................................16 Separate VHF and UHF Antennas ..............................................................17 Connecting Cable TV and VCR..............................................................................18 Cable without a Cable Box .......................................................................18 Cable with a Cable Box that Descrambles All Channels ...............................18 Connecting a Cable Converter Box............................................................19 Connecting a Cable Converter Box and a VCR ...........................................19 Connecting a Camcorder......................................................................................20 Connecting a DVD Player .....................................................................................21 Connecting to Y,PB,PR ...............................................................................21 Connecting to Audio and Video Jacks ........................................................21 Connecting a DTV Set-Top Box ..............................................................................22 Connecting to Y,PB,PR ...............................................................................22 Connecting to DVI (Digital Visual Interface) .................................................22 Connecting to R,G,B.................................................................................23 Connecting to HDMI (High Definition Multimedia Interface) ..........................23 Operation........................................................................................................26 Turning the TV On and Off....................................................................................26 Viewing the Menus and On-Screen Displays ...........................................................26 Selecting the Menu Language................................................................................27 Selecting the Antenna Input ...................................................................................27 Memorizing the Channels .....................................................................................28 Adding and Erasing Channels ...............................................................................29 Changing Channels..............................................................................................30 Selecting Your Favorite Channels ...........................................................................31 Scanning the Channels .........................................................................................32 Labeling the Channels ..........................................................................................33 Picture Control .....................................................................................................34 Sound Control .....................................................................................................36 Setting the Clock..................................................................................................38 Setting the Timers .................................................................................................39 Viewing an External Signal Source ........................................................................41 Assigning Names to External Input Mode ...............................................................42 Freezing the Current Picture ..................................................................................43 Remote Control VCR/DVD Buttons..........................................................................43 PC Display.......................................................................................................80 Using Your TV as a Computer (PC) Display .............................................................80 How to Connect Your PC to the TV.............................................................80 Setting up Your PC Software (Based on Widows 98) ...................................81 Display Modes.........................................................................................82 Adjusting the Picture Quality .................................................................................83 Changing the Picture Position ................................................................................84 Adjusting the Picture Quality and Position Automatically ...........................................85 Initializing the Picture Settings................................................................................86 Changing the Picture Size (PC Mode).....................................................................87 Appendix.........................................................................................................90 Troubleshooting ...................................................................................................90 Cleaning and Maintaining Your TV ........................................................................91 Using Your TV in Another Country..........................................................................91 Specifications ......................................................................................................91 SAMSUNG Your New Wide TV Your New Wide TV Replacing the Lamp • For replacement, you will need a 5.91 Inches-long Phillips screwdriver and a pair of gloves. • Why do I need to replace the lamp? The lamp used in a projection TV has a limited lifespan. For the best screen quality it needs to be replaced periodically. After replacing the lamp, the screen quality will be bright and clear as new. Unplug TV, then remove the screw. Remove the Lamp cover. Remove the screws securing the Lamp. Separate the Lamp from the engine by holding the handle and pulling it out. To reinstall the Lamp, follow these steps in reverse order. • When do I need to replace it? It should be replaced when the screen becomes darker, less clear or when all three LEDs on the front (Timer, Lamp, & Temp.) are flashing. • Check before lamp replacement 1. The lamp must be the same code number and type. 2. The lamp type is indicated on the right side of the TV. It is also indicated on the lamp case. 3. After checking the code number for the lamp, give the code number to the store where you purchased the TV or to a Samsung Service center. • Caution 1. Replace with the correct code numbered lamp to avoid damage to the TV. 2. Turn the power off and wait for 30 minutes before replacing the lamp as it will be hot. 3. Do not touch the glass part of the lamp with your bare hands nor insert any foreign object inside the cover as it may cause poor screen quality, electric shock or fire. 4. Do not place the old lamp near flammable objects or within the reach of children. NOTES • Be sure the replacement Lamp is the same type. • After replacing the lamp, align the lamp cover with the groove and secure the screw. • The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective circuit). Your New Wide TV List of Features Front Panel Buttons Your TV was designed and engineered using the latest technology. It is a full-featured, high-performance unit that exceeds industry standards. In addition, it has these special features: • • • • • • • • • • • • • • • The buttons on the front panel control your TV’s basic features, including the on-screen menu system. To use the more advanced features, you must use the remote control. Easy-to-operate remote control Easy-to-use on-screen menu system you can access from the side panel or remote control Automatic timer to turn the TV on and off at any time you choose Adjustable picture and sound settings and the ability to memorize your favorite settings Automatic channel tuning for up to 181 channels A special filter to reduce or eliminate reception problems Fine tuning control for the sharpest picture possible A built-in multi-channel sound decoder for stereo and bilingual listening Built-in, dual channel speakers A special sleep timer Picture-in-Picture capability that lets you watch two channels at once Widescreen TV with adjustable image size Life-like clear images provided by DNle technology MCC (My Color Control) Mode for corresponding with your color style Color weakness Mode Accessories Once you have unpacked your TV, check to make sure that you have all the parts shown here. If any piece is missing or broken, call your dealer. Standby state. Aim the remote control towards this spot on the TV. Press to turn the TV on and off. Warranty Cards (2)/ Registration Card (1) Remote Control (BP59-00048B)/ AAA Batteries (4301-000103) Instruction Manual/ Safety Guide Manual/ Quick Guide Manual Press to lower or raise the volume and to select items when using the on-screen menu. Press to see the on-screen menu. Auto Timer ON/OFF has been set and the set will automatically be turned on in about 25 seconds. Press to switch between viewing TV programs and signals from connected components. Press to change channels and move between items on the on-screen menu. Press to activate (or change) a particular item. Your New Wide TV Front Panel Information Window Rear Panel Jacks Use the rear panel jacks to connect components such as a VCR. You can connect different components such as VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks and three set of component video input jacks on the rear panel of your TV. For more information, please see “Connections”. Œ ANTENNA terminals Two independent cables or antennas can be connected to these terminals. Use “ANT 1 IN” and “ANT 2 IN” terminals to receive a signal from VHF/UHF antennas or your cable system. Use the “ANT 1 OUT” terminal to send the signal being received by the “ANT 1 IN” terminal out to another component (such as a Cable Set-Top Box). The PIP channel can be received only when a signal source is connected to “ANT 1 IN”. ´ S-VIDEO INPUT jacks Connects an S-Video signal from an S-VHS VCR or DVD player. Your TV is turned on normally. Lamp may be defective. Please contact a certified technician. NOTES • It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately. • The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it working. Check if the ventilation hole on the rear of the set is blocked, because if the inner temperature is too high, the power will shut off. A cooling fan inside the set is not operating normally. ˇ VIDEO/AUDIO INPUT jacks (VCR1, VCR2) Connect video/audio signals from external sources, such as a VCR or DVD players. ¨ VIDEO/AUDIO OUTPUT jacks Sends a video signal from the TV to an external source, such as a VCR. Note: It is available only in RF, Video and S-Video modes. ˆ Component1, 2 jacks (Y, PB, PR, L, R) Use these jacks to connect the component video/audio signals from a DVD player or a set top box when using the component video input jacks. Ø PC AUDIO INPUT jacks Connect these to the audio output jacks on your PC. ∏ PC VIDEO INPUT jack Connect these to the video output jack on your PC . ” DVI (Digital Video Interface) AUDIO INPUT jacks Connect to the digital audio output jacks for device with DVI output. ’ DVI (Digital Video Interface) VIDEO INPUT jack Connect to the digital video output jack for device with DVI output. ˝ HDMI (High Definition Multimedia Interface) VIDEO/AUDIO INPUT jack Connect to the HDMI jack for device with HDMI output. Ô SERVICE This jack is for repair and software upgrades. 10 11 Your New Wide TV Remote Control Installing Batteries in the Remote Control You can use the remote control up to about 23 feet from the TV. When using the remote control, always point it directly at the TV. You can also use your remote control to operate your Set-Top box, VCR, Cable box or DVD player. See pages 46~47 for details. With normal use, the batteries in the remote control should last about a year. If you notice a performance degradation while using the remote, the batteries may need to be replaced. Make sure you replace both batteries and do not mix old and new batteries in the remote control. If you won’t be using the remote control for a long time, remove the batteries and store them in a cool dry place. 1. POWER Turns the TV on and off. 2. S.MODE Adjust the TV sound by selecting one of the preset factory settings (or select your personal, customized sound settings.) 3. P.MODE Adjust the TV picture by selecting one of the preset factory settings (or select your personal, customized picture settings.) Press to select cable channels over 100 on TV. 5. VOL +, VOL Press to increase or decrease the volume. 6. MUTE Press to mute the TV sound. 7. FAV.CH (Favorite Channel) Press to switch between your favorite channels. 8. MENU Displays the main on-screen menu. 9. STILL Press to stop the action during a particular scene. Press again to resume normal video. 10. P.SIZE Press to change the picture size. 11. MODE Selects a target device to be controlled by the Samsung remote control (i.e., TV, STB, VCR, CABLE, or DVD). 12. PRE-CH Tunes to the previous channel. 13. TV/VIDEO Press to display all of the available video sources (i.e., TV, Set-Top box, VCR, DVD, DTV, PC). , CH Press to change channels. 15. INFO Press to display information on the TV screen. 16. EXIT Press to exit the menu. 12 Press to select highlight up, down, left, or right. While using the on-screen menus, press the ENTER to activate (or change) a particular item. 18. MTS (Multichannel Television Stereo) Slide the back cover all the way out to open the battery compartment of the remote control. Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. Slide the cover back into place. Press to choose Stereo, Mono or SAP (Secondary Audio Program). 19. SRS Activates TruSurround. 20. ADD/DEL 4. +100 14. CH 17. ▲, ▼, œ, √, ENTER Press to add or erase channels in the TV’s memory. Use the ADD/DEL button to memorize and erase the fine tuning after fine tuning channels. 21. SLEEP Press to select a preset time interval for automatic shutoff. 22. PIP (Picture In Picture) Activates PIP. 23. SET Used during set up of this remote control, so that it will work compatibly with other devices (Set-Top box, VCR, Cable box, DVD, etc.) 24. DNIe (Digital Natural Image engine) Activates DNIe. 25. PIP Controls SIZE; Press to select the size of PIP window. SWAP; Press to exchange the video signal that is currently displayed on the main screen with the signal in the PIP window. CH / ; Press to display the available channels in sequence. (These buttons change channels in the PIP window only.) 26. VCR/DVD Controls Controls VCR or DVD functions: Rewind, Stop, Play/Pause, Fast Forward. 27. RESET If your remote control is not functioning properly, take out the batteries and press the reset button for about 2~3 seconds. Re-insert the batteries and try using the remote control again. 13 SAMSUNG Connections Connections Connecting VHF and UHF Antennas Separate VHF and UHF Antennas If you do not have a cable system, you will need to connect an antenna to your TV. Antennas with 300-ohm Flat Twin Leads If your antenna looks like this: it has 300-ohm flat twin leads. Place the wires from the twin leads under the screws on the 300-75 ohm adaptor (not supplied). Use a screwdriver to tighten the screws. If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops). Connect both antenna leads to the combiner. Plug the combiner into the “ANT 1 IN” terminal on the rear panel. Plug the adapter into the “ANT 1 IN” terminal on the rear panel. Antennas with 75-ohm Round Leads If your antenna looks like this: 16 it is an antenna with 75-ohm round leads. Plug the antenna lead into the “ANT 1 IN” terminal on the rear panel. 17 Connections Connecting Cable TV and VCR You can connect different cable systems to your TV, including cable without a cable box, and cable with a cable box that descrambles some or all channels. Connecting a Cable Converter Box This connection allows you to watch cable and premium channels. You should keep your TV selected to “ANT 1 IN” so that you can use the TV features. When viewing premium channels, select “ANT 2 IN” and tune the TV to channel 3 or 4 (whichever channel is vacant in your area), then use the converter box to change channels. You will need two coaxial cables. NOTES Cable without a Cable Box From Cable If you want to connect cable, and you do not need to use a cable box: • When you use a converter box with your TV, there may be features that you can not program using the remote control, such as programming your favorite channels and blocking channels. • The output from “ANT 1 OUT” is available when select “Ant.2” in the “Antenna“ channel menu. Plug the incoming cable into the “ANT 1 IN” terminal on the rear panel. Cable converter box Cable with a Cable Box that Descrambles All Channels Connecting a Cable Converter Box and a VCR Find the cable that is connected to the ANTENNA OUT terminal on your cable box. This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”. Connect the other end of this cable to the “ANT 1 IN” terminal on the rear panel. This connection allows you to watch and record basic and premium cable channels, as well as watch videotapes. You should keep your TV selected to “ANT 1 IN” so that you can use the TV’s features. When viewing premium channels or recording with the VCR, select “ANT 2 IN” (whichever channel is vacant in your area), then use the converter box to change channels. Caution: If you want to record one channel while watching another channel, a splitter (not included) must be added between the cable and “ANT 1 IN”. One output of the splitter goes to “ANT 1 OUT” and the second output is connected to IN on the cable converter box. TV Rear Panel If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. From Cable If you have a S-VHS VCR, use the S-Video connections and remove the video cable. Do not connect the video cable and the S-Video cable to video1 simultaneously. Cable converter box Stereo VCR 18 When you use a converter box with your TV there may be features that you can not program using the remote control, such as programming your favorite channels and blocking channels. 19 Connections Connecting a Camcorder Connecting a DVD Player The rear panel jacks on your TV make it easy to connect a camcorder to your TV. You can use your camcorder to view tapes without using a VCR. The rear panel jacks on your TV make it easy to connect a DVD player to your TV. Connecting to Y,PB,PR Locate the A/V output jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a set of audio cables between the AV (1 or 2) AUDIO (L,R) IN jacks on the TV and the AUDIO OUT jacks on the camcorder. If you have mono camcorder, connect L(mono) to camcorder audio out using only one audio cable. Connect a video cable between the AV (1 or 2) VIDEO IN (or S-VIDEO IN) jack on the TV and the VIDEO OUT jack on the camcorder. The audiovideo cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables. Camcorder Connect a set of audio cables between the COMPONENT (1 or 2) AUDIO (L,R) IN jacks on the TV and the AUDIO OUT jacks on the DVD player. To enable Component video viewing, connect a set of video cables between the COMPONENT (1 or 2) VIDEO (Y, PB, PR) IN jacks on the TV and VIDEO (Y/PB/PR or Y/CB/CR) OUT jacks on the DVD player. TV Rear Panel Camcorder Output Jacks Note: For an explanation of Component video, see your DVD player's owner's manual. DVD Player TV Rear Panel Incoming Cable or Antenna Connecting to audio and video jacks Connect a set of audio cables between the AUDIO IN (1 or 2) jacks on the TV and the AUDIO OUT jacks on the DVD player. TV Rear Panel DVD Player Connect a video cable between the VIDEO IN (1 or 2) jack on the TV and the VIDEO OUT jack on the DVD player. Incoming Cable or Antenna 20 21 Connections Connecting a DTV Set-Top Box Connecting to Y,PB,PR Connecting to R,G,B Connect a set of audio cables between the COMPONENT (1 or 2) AUDIO (L,R) IN jacks on the TV and the AUDIO OUT jacks on the Set-Top Box. Connect a set of video cables between the COMPONENT (1 or 2) VIDEO (Y, PB, PR) IN jacks on the TV and VIDEO (Y/PB/PR or Y/CB/CR) OUT jacks on the Set-Top Box. Note: For an explanation of Component video, see your Set Top Box owner's manual. Connect a video cable between the DVI IN jack on the TV and the DVI OUT jack on the Set-Top Box. TV Rear Panel Connect a video cable between the PC IN jack on the TV and the R.G.B OUT jack on the Set-Top Box. TV Rear Panel Incoming Cable or Antenna DTV Set-Top Box DTV Set-Top Box Connecting to HDMI (High Definition Multimedia Interface) TV Rear Panel Connect a HDMI cable between the HDMI IN jack on the TV and the HDMI OUT jack on the Set-Top Box. TV Rear Panel NOTE Incoming Cable or Antenna DTV Set-Top Box 22 Incoming Cable or Antenna Connecting to DVI (Digital Visual Interface) Connect a set of audio cables between the DVI AUDIO (L,R) IN jacks on the TV and the AUDIO OUT jacks on the Set-Top Box. Connect a set of audio cables between the PC AUDIO (L,R) IN jacks on the TV and the AUDIO OUT jacks on the Set-Top Box. • Please check if the power of HDMI source is on, in case that you fail to select HDMI from the “Source List” even after you connected the cable of HDMI source (DTV Set-Top Box, DVD, etc.) to TV. Incoming Cable or Antenna DTV Set-Top Box 23 SAMSUNG Operation Operation Turning the TV On and Off Selecting the Menu Language Press the POWER button on the remote control. You can also use the POWER button on the front panel. Choose a language for the on-screen menus: English, Spanish or French. Viewing the Menus and On-Screen Displays The on-screen menu system allows you to control the settings of your TV. Access the on-screen menu system by pressing the MENU button on the remote control. Once the on-screen menu appears, use the …/†/œ/√/ENTER on your remote control to select menu items and make adjustments. You can also view the on-screen menu system and make some adjustments using the TV’s side panel buttons. Press the MENU button. The main menu is displayed. There are five menu groups: “Input”, “Picture”, “Sound”, “Channel” and “Setup”. Picture Sound Press the … or † button to select to an item you want in the menu. Press the œ, √ or ENTER button to display, change, or use the selected items. Use the ENTER button to enter items in the menu. Press the ENTER button to select “Language”. Press the … or † button to select the appropriate language, then press ENTER button. Move Enter Enter Return Setup Input Picture Sound Channel Language : English English Español Time Français V-Chip Caption Blue Screen : Off Melody : On Color Weakness PC Setup Move Enter Return Exit Picture Input Picture Sound Channel Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Setup : Standard : Warm1 : Off : On : Off Move Enter √ √ √ √ √ √ √ √ Return Selecting the Antenna Input You can connect to two different signal sources by choosing the antenna input (1 or 2). Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button. Channel Input Picture Sound Channel Viewing the Display Setup Air 12 Signal V-Chip Picture Sound SRS TSXT MTS Mono Dynamic Standard Stereo Stereo Press the ENTER button to select “Antenna”. Press the … or † button to select “Ant.1” or “Ant.2”, then press ENTER button. - - : - - am Press the EXIT button to exit. 26 Move Channel Press the EXIT button to exit. Press the INFO button on the remote control. The TV displays the current channel, the status of certain picture and sound settings and the current time. Sound √ √ √ √ √ √ √ √ Press the EXIT button to exit. Setup √ √ Source List : TV Edit Name Picture Language : English Time V-Chip Caption Blue Screen : Off Melody : On Color Weakness PC Setup Input Input Setup Input Channel Viewing the Menus Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Antenna : Ant.1 Air/CATV : Air Auto Program Add/Delete Favorite Channels Name Fine Tune ▼ More Move Enter √ √ √ √ √ √ √ Return Channel Input Picture Sound Channel Setup Antenna : Ant.1 Ant.1 Ant.2 Air/CATV : Air Auto Program Add/Delete Favorite Channels Name Fine Tune ▼ More Move Enter Return 27 Operation Memorizing the Channels Storing Channels in Memory (Automatic Method) Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding/deleting channels (manual). First, select the correct signal source (“Air”, “STD”, “HRC” or “IRC”) as described on the previous page. Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button. Press the … or † button to select “Auto Program”, then press the ENTER button. Press the ENTER button to start the auto program. The TV begins memorizing all of the available stations. Press the ENTER button at any time to interrupt the memorization process. Channel Input Picture Sound Selecting the Video Signal Source Before your TV can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system). Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button. Channel Input Picture Sound Channel Setup Press the … or † button to select “Air/CATV”, then press the ENTER button. If you are connected to an antenna, press the … or † button to select “Air”. If you connected cable, press the … or † button to select the type of cable system: “STD”, “HRC” or “IRC”. Antenna : Ant.1 Air/CATV : Air Auto Program Add/Delete Favorite Channels Name Fine Tune ▼ More Move Enter √ √ √ √ √ √ √ Return Channel Input Picture Sound Channel Setup Enter Move Enter Return Auto Program Start Enter Press the EXIT button to exit. Return Adding and Erasing Channels Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button. Press the … or † button to select “Add/Delete”, then press the ENTER button. Repeatedly pressing the ENTER button will alternate between add channel and delete channel. Press the CH or CH button (or number buttons) to switch to the appropriate channel, then repeat above. Return Press the EXIT button to exit. NOTES • “STD”, “HRC” and “IRC” identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to “Storing Channels in Memory”. • Subscription cable services require service-specific requirement for viewing. 28 Setup You can add channels that were not memorized or delete unwanted channels from memory. Air Antenna : Ant.1 Air/CATV : AirSTD HRC Auto Program IRC Add/Delete Favorite Channels Name Fine Tune ▼ More Move Channel √ √ √ √ √ √ √ Antenna : Ant.1 Air/CATV : Air Auto Program Add/Delete Favorite Channels Name Fine Tune ▼ More Channel Input Picture Sound Channel √ √ √ √ √ √ √ Antenna : Ant.1 Air/CATV : Air Auto Program Add/Delete Favorite Channels Name Fine Tune ▼ More Setup Move Enter Return Add/Delete Air 12 Not In Memory Add Change Enter Return Press the EXIT button to exit. Alternate method Simply press the ADD/DEL button on the remote control to add or delete channels. 29 Operation Changing Channels Selecting Your Favorite Channels You can change channels on your TV by using the CH and CH buttons, or by direct selection using the number buttons. You can use the number buttons to tune to any channel (even one that has been erased or has not been memorized). You can store your favorite channels for each available input source (such as TV and CATV). This allows you to quickly and easily find frequently watched channels by pressing the FAV.CH button on the remote control. Using the Channel Buttons Press the CH or CH button to change channels. When you press the CH or CH button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.) You will not see channels that were either erased or not memorized. To Store Your Favorite Channels: Press the number buttons to go directly to a channel. When you use the number buttons, you can directly select channels that were either erased or not memorized. For example, to select channel “27”, press the “2”, then “7”. The TV will change channels when you press the second number. Channel Input Picture Sound Channel Press the … or † button to select “Favorite Channels”, then press the ENTER button. Press the … or † button to select a channel, then press the ENTER button. Press the ENTER button again to deselect the selected channel. √ √ √ √ √ √ √ Antenna : Ant.1 Air/CATV : Air Auto Program Add/Delete Favorite Channels Name Fine Tune ▼ More Setup Using the Number Buttons Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button. Move Enter Return Favorite Channels Input Picture Sound Channel Setup Air 2 ---- Air 3 ---- Air 4 ---- Air 5 ---- Air 6 ---- Air 7 ---- Air 8 ✔ ---▼ Move Enter Return Press the EXIT button to exit. To change to single-digit channels (0–9) faster, press the “0” before the single digit. (For channel “4”, press the “0”, then “4”.) To select a channel over 100, press the +100 button. (For channel “122”, press the +100 button, then “2”, then “2”.) To View Your Favorite Channels: Press the FAV.CH button repeatedly to jump from one favorite channel to another. Using the Previous Channel Press the PRE-CH button. The TV changes to the last channel you were watching. NOTE • Only memorized channels can be set as Favorite channels. 30 31 Operation Scanning the Channels Labeling the Channels The TV automatically scan all of the channels it has memorized. Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”, “PBS2”, CNN1”, etc.) A label consists of five fields, where each field is a letter, a number or a blank. When the INFO button is pressed, the channel label will appear next to the channel number. Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button. Channel Input Picture Sound Channel Setup Press the … or † button to select “Scan”, then press the ENTER button. The TV scans all of the channels memorized. Press the EXIT button to exit. √ √ √ √ √ √ √ Antenna : Ant.1 Air/CATV : Air Auto Program Add/Delete Favorite Channels Name Fine Tune ▼ More Move Enter Return Channel Input Picture ▲ More LNA Scan Press the CH or CH will be labeled. Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button. Press the … or † button to select “Name”, then press the ENTER button. √ √ : On Sound Channel Setup Move Enter Return Scan Air 3 Air 4 Return Enter Return NOTE • When the “ANT 2 IN” mode is selected, the channel scan function works on the main picture only. NOTE • If you add or delete the TV channel, the labeled channels list will also be added or deleted. button to tune to the channel that Press the …/†/œ/√ button to move to the channel to be assigned to a new name, then press the ENTER button. Press the … or † button to select a letter, a number or a blank. (Results in this sequence: A...Z, ✽, blank, 0...9, -). Press the √ button to switch to the next field, which will be selected. Select a second letter or digit pressing … or † button, as above. Repeat the process to select the last two digits. When you have finished, press the ENTER button. To erase the assigned new name, select “Clear” by pressing the …/†/œ/√ button, then press the ENTER button. Channel Input Picture Sound Channel Antenna : Ant.1 Air/CATV : Air Auto Program Add/Delete Favorite Channels Name Fine Tune ▼ More Setup Move Enter √ √ √ √ √ √ √ Return Name Input ▲ Air 2 Air 3 ---- Clear Air 4 ---- Clear Air 5 ---- Clear Air 6 ---- Clear Clear ▼ Picture Sound Channel ▼ Setup Move Adjust Return Name Input Picture Sound Channel Setup Air 2 CNN2 Clear Air 3 ---- Clear Air 4 ---- Clear Air 5 ---- Clear Air 6 ---- Clear ▼ Move Enter Return Press the EXIT button to exit. 32 33 Operation Picture Control Using Automatic Picture Settings Your TV has automatic picture settings (“Dynamic”, “Standard” and “Cinema”) that are preset at the factory. You can activate either “Dynamic”, “Standard” or “Cinema” by pressing the P.MODE button (or by making a selection from the menu). Or, you can select “Custom” which automatically recalls your personalized picture settings. You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color” and “Tint” according to personal preference. (Alternatively, you can use one of the automatic settings. See next page.) Customizing the Picture Press the MENU button. Press the … or † button to select “Picture”, then press the ENTER button. Picture Input Picture Sound Channel Setup Press the ENTER button to select “Mode”. Input Sound Channel Setup : Standard : Warm1 : Off : On : Off Move Enter √ √ √ √ √ √ √ √ Mode Contrast Brightness Sharpness Color Tint 50 Reset Picture Input Picture Sound Channel Setup √ 90 50 50 60 50 : Standard Enter Input Picture Sound Channel : Off : On : Off Move Enter √ √ √ √ √ √ √ √ Return Mode Contrast Brightness Sharpness Color Tint 50 Reset : Standard √ 90 50 50 60 50 Enter Return Move Return ▲ 90 Contrast : Standard : Warm1 Mode Press the ENTER button to select “Mode”. Setup Move Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Return Mode Picture Press the … or † button to select a particular item, then press the ENTER button. Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Press the MENU button. Press the … or † button to select “Picture”, then press the ENTER button. ▼ Press the œ or √ button to increase or decrease the value of a particular item. Press the ENTER button again to select “Mode”. Press the … or † button to select a particular item, then press the ENTER button. Press the EXIT button to exit. Mode Input Picture Sound Channel Setup Mode Contrast Brightness Sharpness Color Tint 50 Reset Dynamic : Standard Move Standard Cinema Enter 90 50 50 60 50 Return Alternate method Resetting the Picture Settings to the Factory Defaults Press the P.MODE button on the remote control repeatedly to select one of the standard picture settings. You can return to the factory default picture settings. NOTE • “Tint” doesn’t operate in PC, DVI, HDMI or 480p-Component or higher modes. Press the MENU button to display the “Mode” menu. Press the … or † button to select “Reset”, then press the ENTER button. The previously adjusted picture settings will be reset to the factory defaults. Mode Input Picture Sound Channel Setup Mode Contrast Brightness Sharpness Color Tint 50 Reset Move : Standard Enter √ 90 50 50 60 50 Return Standard • Choose “Dynamic” for viewing the TV during the day or when there is a bright light in the room. • Choose “Standard” for the standard factory settings. • Choose “Cinema” when viewing a movie. 34 35 Operation Sound Control You can control and customize the sound levels and settings of the TV with the remote control. Press the œ or √ button to select a particular item to be changed. Press the … or † button to increase or decrease the value of a particular item. Press the EXIT button to exit. Adjusting the Volume Equalizer Input Picture Sound Channel Balance 100Hz 300Hz 1KHz 3KHz 10KHz Setup Move Adjust Return Press the VOL+ or VOL– buttons to increase or decrease the volume. Using Automatic Sound Settings Your TV has automatic sound settings (“Standard”, “Music”, “Movie” and “Speech”) that are preset at the factory. You can activate these sound settings by pressing the S.MODE button (or by making a selection from the menu), or you can select “Custom”, which automatically recalls your personalized sound settings. Using the MUTE Button At any time, you can temporarily cut off the sound. Press the MUTE button on the remote control. The message “Mute” is displayed and the sound cuts off. Mute Press the MENU button. Press the … or † button to select “Sound”, then press the ENTER button. Setup The sound settings can be adjusted to suit your personal preference. (Alternatively, you can use one of the automatic settings. See next page.) Press the ENTER button to select “Mode”. Press the … or † button to select a particular item, then press the ENTER button. Press the EXIT button to exit. Sound Input Picture Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute : Standard Off Stereo Off Off √ √ √ √ √ √ Channel Setup Press the … or † button to select “Equalizer”, then press the ENTER button. Move Enter Return Picture Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute : Standard Off Stereo Off Off √ √ √ √ √ √ Off Stereo Off Off Setup Enter Return Sound Input Picture Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute Standard : Standard Music Movie Off Speech Stereo Custom Off Off Channel Setup Move Enter Return Alternate method Press the S.MODE button on the remote control repeatedly to select one of the standard sound settings. Standard : Standard √ √ √ √ √ √ Channel 36 Move Sound Input Sound Continued... Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute Channel Customizing the Sound Picture Sound To turn mute off press the MUTE button again or, press either the VOL+ or VOL– button. Press the MENU button. Press the … or † button to select “Sound”, then press the ENTER button. Sound Input • Choose “Standard” for the standard factory settings. • Choose “Music” when watching music videos or concerts. Move Enter Return • Choose “Movie” when watching movies. • Choose “Speech” when watching a show that is mostly dialogue (i.e., news). • Choose “Custom” to recall your personalized settings. 37 Operation Setting the Clock Setting the Timers Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) This TV can be set to turn on or off automatically at specific times that you choose. Before using the timers, you must set the TV’s clock, as described previously. Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Press the … or † button to select “Time”, then press the ENTER button. Setup Input Picture Sound Channel Setup √ √ √ √ √ √ √ √ Language : English Time V-Chip Caption Blue Screen : Off Melody : On Color Weakness PC Move Enter Setting the On/Off Timer Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Setup Input Picture Sound Channel Return Setup Press the ENTER button to select “Clock Set”. Move Time Input Picture Clock Set Sleep Timer On Timer Off Timer - - : - - am Off Off Off √ √ √ √ Sound Channel Setup Move Enter Press the … or † button to select “Time”, then press the ENTER button. Press the … or † button to select “On Timer”, then press the ENTER button. Return Picture Clock Set Sleep Timer On Timer Off Timer 10 : 30 am Off Off Off √ √ √ √ Sound Channel Return Move Clock Set Enter Return Input Picture Hour Min am/pm ▲ Sound 12 00 am ▼ Channel Setup Move Adjust Return Press the EXIT button to exit. NOTE Press the … or † button to adjust “Hour”, then press the √ button to move to the next step. Set other items using the same method as above. When finished, press the MENU button to return. Press the … or † button to select “Off Timer”, then press the ENTER button. On Timer Input Hour When you set the timer “On”, your television will eventually be turned off, if you do not operate any controls during the 3 hours after the TV is turned on by timer. This function is available in only the timer “On” mode and will prevent a leakage accident or overheating, caused by your TV left on for a long time due to the timer “On” (when you are away on holiday, for example). am/pm 00 am 12 ▼ Sound Channel Ch Vol. Activation 03 Setup 10 Move No Adjust Return Time Input Clock Set Sleep Timer On Timer Off Timer 10 : 30 am Off 06 : 30 am Off √ √ √ √ Sound Channel Setup Absent Power Off Min ▲ Picture Picture • The current time will appear every time you press the INFO button. 38 Enter Time Input Setup Press the œ or √ button to move to “Hour”, “Min” or “am/pm”. Set the clock you want by pressing the … or † button, then press the ENTER button. √ √ √ √ √ √ √ √ Language : English Time V-Chip Caption Blue Screen : Off Melody : On Color Weakness PC Press the … or † button to adjust “Hour”, then press the √ button to move to the next step. Set other items using the same method as above. Press the EXIT button to exit. Move Enter Return Off Timer Input Hour Min am/pm Activation ▲ Picture 12 00 am No ▼ Sound Channel Setup Move Adjust Return 39 Operation Viewing an External Signal Source Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes). Use the remote control to switch between viewing signals from connected equipment, such as VCR, DVD, Set-Top box and the TV source (broadcast or cable). Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Setup Input Picture Sound Channel Setup √ √ √ √ √ √ √ √ Language : English Time V-Chip Caption Blue Screen : Off Melody : On Color Weakness PC Move Enter Setting the Signal Source Press the MENU button. Press the ENTER button to select “Input”. Return Input Input √ √ Source List : TV Edit Name Picture Sound Channel Press the … or † button to select “Time”, then press the ENTER button. Press the … or † button to select “Sleep Timer”, then press the ENTER button. Press the … or † button to select “Sleep Timer”, then press the ENTER button. Time Input Picture Clock Set Sleep Timer On Timer Off Timer 10 : 30 am Off 06 : 30 am 11 : 30 pm Sound Channel Setup Move Enter Return Setup Press the ENTER button to select “Source List”. Press the … or † button to select a signal source, then press the ENTER button. Picture Clock Set Sleep Timer On Timer Off Timer 10 : 30 am OffOff 06 : 3030am 11 : 3060pm 90 120 150 180 Channel Setup Move Enter Press the EXIT button to exit. Move Enter Return Source List Input Picture Sound Channel Time Input Sound Press the … or † button to select the preset time you want, then press the ENTER button. √ √ √ √ Setup TV AV1 AV2 S-Video1 S-Video2 Component1 Component2 ▼ More Move Enter Return Alternate method Return Press the TV/VIDEO button on the remote control repeatedly to select an external signal source. AV1 Press the EXIT button to exit. Alternate method Press the SLEEP button on the remote control repeatedly until the appropriate time interval appears (any of the preset values from “30 Min.” to “180 Min.”). 30 Min. NOTE • If no signal is received for 15 minutes, the TV will be automatically turned off. 40 41 Operation Assigning Names to External Input Mode Freezing the Current Picture This feature enables you to name the input source you have connected. You can freeze the picture when watching a television programme simply by pressing the STILL button. To return to normal viewing, press it again. Press the MENU button. Press the ENTER button to select “Input”. Input Input √ √ Source List : TV Edit Name Picture NOTE • In the PIP mode, the main and sub pictures are stilled at the same time. Sound Channel Setup Press the … or † button to to select “Edit Name”, then press the ENTER button. Move Enter Return Input Input √ √ Source List : TV Edit Name Picture Sound Channel Setup Press the … or † button to select a signal source, then press the ENTER button. Press the … or † button to select an external device, then press the ENTER button. Press the EXIT button to exit. Move Enter Return Edit Name Input Picture Sound Channel Setup AV1 AV2 S-Video1 S-Video2 Component1 Component2 PC ▼ More Move - - - --- - - - - VCR - - - DVD - Cable - - - STB - - HD - - STB -Satellite - - - STB -AV - -Receiver Remote Control VCR/DVD Buttons ▼ Enter Return Flip the cover of the remote control up to access buttons that can control the tape functions of a connected VCR or DVD, including Rewind, Stop, Play/Pause and Fast Forward. Slide the cover of your remote control unit for access to the tape function controls. Press the appropriate buttons to control your VCR or DVD. 42 43 SAMSUNG Special Features Special Features Customizing Your Remote Control Your TV comes equipped with a universal remote control. In addition to controlling the TV, the universal remote control can also operate a VCR, Cable box, DVD and Set-Top Box made by Samsung (even if your VCR, Cable box and DVD are made by manufacturers other than Samsung). Remote Control Codes VCR Codes NOTE • The remote control might not be compatible with all VCRs, DVD players and Cable boxes. Setting Up Your Remote Control to Operate Your VCR (Cable box or DVD player) Turn off your VCR (Cable box or DVD player). On your Samsung remote control, press the SET button. Press the MODE button to switch the remote control to the VCR (CABLE or DVD) mode. The remote control has five modes: TV, STB, VCR, CABLE and DVD. Enter 3 digits of the VCR (Cable box or DVD player) code listed on next page for your brand of VCR (Cable box or DVD player). Make sure you enter 3 digits of the code, even if the first digit is a “0”. (If more than one code listed, try the first one.) Press the POWER button. Your VCR (Cable box or DVD player) should turn on. If your VCR (Cable box or DVD player) turns on, your remote control is now set correctly. If your VCR (Cable box or DVD player) does not turn on, repeat steps 2, 3, and 4, but try one of the other codes listed for the brand of your particular VCR (Cable box or DVD player). Once your remote control is set up, press the MODE button any time you want to use the remote to operate your VCR (Cable box or DVD player). NOTES • When your remote is in the TV mode, the VCR (or DVD player) control buttons (REW, STOP, PLAY/PAUSE and FF) will still operate your VCR (or DVD player). • When your remote control is in the STB, VCR, CABLE or DVD mode, the volume buttons still control your TV’s volume. 46 Cable Box Codes DVD Codes 47 Special Features Fine Tuning Channels LNA (Low Noise Amplifier) The Fine Tuning function lets you manually adjust the TV’s tuner if you have difficulty tuning channels. When a weak broadcast signal causes unclear noisy picture the “LNA” feature improves the picture quality by setting to “On”. If you experience noise on a certain channel, set the “LNA” to “On” or “Off” for this channel, to obtain the optimum picture. Using the number buttons on the remote control, select the channel you want to fine tune. Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button. Channel Sound Setup Move Return Setup Move Enter Return Fine Tune To reset the fine tuning to “0”, select “Reset” by pressing the … or † button, then press the ENTER button. Picture Sound Setup Press the … or † button to select “LNA”, then press the ENTER button. Antenna : Ant.1 Air/CATV : Air Auto Program Add/Delete Favorite Channels Name Fine Tune ▼ More Move Enter √ √ √ √ √ √ √ Return Channel Input Picture ▲ More LNA Scan : Off √ √ Enter Return Sound Channel Setup Press the … or † button to select “On” or “Off”, then press the ENTER button. Move Channel Input Picture ▲ More LNA Scan : OffOff On Sound Press the EXIT button to exit. Save Adjust Channel Setup Reset Move Channel Input Channel Air 12 To store the fine tuning setting in the TV’s memory, press the ENTER button. The symbol “*” is displayed. Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button. √ √ √ √ √ √ √ Antenna : Ant.1 Air/CATV : Air Auto Program Add/Delete Favorite Channels Name Fine Tune ▼ More Input Picture Sound Enter Channel Channel Press the œ or √ button to adjust the fine tuning. √ √ √ √ √ √ √ Antenna : Ant.1 Air/CATV : Air Auto Program Add/Delete Favorite Channels Name Fine Tune ▼ More Input Picture Channel Press the … or † button to select “Fine Tune”, then press the ENTER button. Move Enter Return Return Fine Tune Air 12 NOTE Reset Move Press the EXIT button to exit. Enter Return • This function works in “ANT 1 IN” mode only (not available in “ANT 2 IN” mode). Fine Tune Air 12 Reset Move 48 Enter Return 49 Special Features Selecting the Color Tone Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. Press the MENU button. Press the … or † button to select “Picture”, then press the ENTER button. Picture Input Picture Sound Channel Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Setup Press the … or † button to select “Color Tone”, then press the ENTER button. Input Picture Channel Press the EXIT button to exit. : Off Move Enter Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Setup : Off : On √ √ √ √ √ √ √ √ Return Picture Sound Press the … or † button to select “Cool2”, “Cool1”, “Normal”, “Warm1” or “Warm2”, then press the ENTER button. : Standard : Warm1 Move : Standard : Warm1 : Off : On : Off Enter √ √ √ √ √ √ √ √ Return Input Picture Sound Channel Setup Move Press the œ or √ button to select the screen format you want, then press the ENTER button. Press the EXIT button to exit. Picture Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Press the MENU button. Press the … or † button to select “Picture”, then press the ENTER button. Press the … or † button to select “Size”, then press the ENTER button. : Standard Cool2 : Warm1 Picture Sound Channel Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Setup Move √ √ √ √ √ √ √ √ : Standard : Warm1 : Off : On : Off Enter Return Size Input Picture Sound Wide Panorama Zoom1 Zoom2 4:3 Channel Setup Move Enter Return Alternate method Cool1 Normal : Off Warm1 : On Press the P.SIZE button on the remote control repeatedly to select one of the picture size settings. Warm2 : Off Enter Picture Input • “Wide”: Sets the picture to 16:9 wide mode. Return • “Panorama”: Use this mode for the wide aspect ratio of a panoramic picture. • “Zoom1”: Magnifies the size of the picture on screen. You can also move the picture on screen using the scroll function. Press the … or † button to scroll the picture. NOTE • Not available in the “Cinema” picture mode. • “Zoom2”: Magnifies the size of the picture more than “Zoom1”. You can also move the picture on screen using the scroll function. Press the … or † button to scroll the picture. • “4:3”: Sets the picture to 4:3 normal mode. This is a standard TV screen size. NOTES • You can select only Wide, 4:3 screen size in the Component(480p, 720p, 1080i) Mode. • With PIP On, the screen automatically becomes wide in the Antenna, AV (1~3), S-Video (1~3) or Component (480i) mode. With PIP Off, it returns to original screen size. • The picture size can’t be changed when the “PIP” is active in the TV or AV mode. 50 51
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2004:05:06 13:09:13-03:00 Create Date : 2004:05:06 13:09:01-03:00 Title : BP68-00352A-00(cover) Author : so Creator : QuarkXPress 4.1_ENG: AdobePS 8.8.0 (301) Producer : Acrobat Distiller 4.0 for Macintosh Page Count : 26 Mod Date : 2004:05:06 13:09:13-03:00 Creation Date : 2004:05:06 13:09:01-03:00 Metadata Date : 2004:05:06 13:09:13-03:00EXIF Metadata provided by EXIF.tools