Samsung Electronics Co EI-GP20 Game Pad User Manual EI GP20 UM E Eng indd
Samsung Electronics Co Ltd Game Pad EI GP20 UM E Eng indd
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2137197 |
| Application ID | mfwrD2Fl0MW6/FcvGd9faA== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 144.64kB (1808031 bits) |
| Date Submitted | 2013-12-09 00:00:00 |
| Date Available | 2014-06-07 00:00:00 |
| Creation Date | 2013-09-03 17:12:27 |
| Producing Software | Adobe PDF Library 9.9 |
| Document Lastmod | 2013-09-12 18:48:55 |
| Document Title | EI-GP20_UM_E_Eng.indd |
| Document Creator | Adobe InDesign CS5.5 (7.5) |
This manual’s images and content may differ from the product. Overview Turning the device on or off Slide the power switch to turn the device on or off, or enter Pairing mode. Holder Gamepad Off On Indicator light Charging jack Select button Charging the device Use a charger to charge the battery before using the device for the first time. Connect the device and the charger, and then plug the charger into an electric socket. EI-GP20_UM_E_Eng.indd 1 Type E. AXXXXX 09/2013. Rev. 1.0 The charger and the charging cable are sold separately. Status Indicator light Above 80% Flashes blue five times. 20%-80% Flashes yellow five times. Below 20% Flashes red five times. Pairing and connecting the device Activate the NFC and Bluetooth feature on the smartphone. Make sure to unlock the smartphone before using the NFC feature. this feature. activate NFC, refer to the mobile device’s user manual. Device status Option 1: Manual Pairing Reconnecting If the connection is lost while in use, press any button or use the Bluetooth menu on the smartphone. Turned off Turns off. Turned on Flashes blue four times. In Pairing mode Turns blue for 3 minutes. While charging Flashes blue three times. Flashes blue times. Flashes red continuously. Slide the power switch all the way to the right for 3 seconds to enter Pairing mode. • The indicator light turns blue for 3 minutes. Activate the Bluetooth feature on the smartphone, scan for the device, and then select the device name “Samsung Game Pad EI-GP20” from the list of available devices. For more details, refer to the mobile device’s user manual. Pull out the holder from the device. • To locate the mobile device’s NFC antenna and Reconnecting and disconnecting Indicator light • Some of NFC-enabled devices may not support When using a new smartphone, you need to pair it with the device. Once pairing is complete, the device attempts to reconnect each time you turn it on. Status Attaching a smartphone to the device Turn the device on, and then the device’s back, the NFC logo, to the smartphone’s NFC antenna until NFC pairing completes. Monitor the device’s condition by checking the indicator light. Bluetooth Connected Bluetooth Disconnected Battery power is low www.samsung.com Option 2: Pairing via NFC Press and hold the select button when the device is turned on. Pairing mode Checking the indicator light Power switch Battery status Do not pull out the holder excessively. Doing so may damage the device. Slide the smartphone into the holder until it is fixed firmly as shown in the image below. Make sure the device is turned on, and the smartphone’s Bluetooth feature is activated. Disconnecting Turn off the device or use the Bluetooth menu on the smartphone. The device is suitable for 4”-6.3” Samsung smartphones. Turns red. 2013-09-03 오후 5:12:28 Removing the smartphone from the device Push the smartphone to upper side of the device, and lift it as show in the image below. Buttons Trigger button G button Analog stick (L) D-pad Select in-game menus. Start button Start or pause the game. Analog stick (R) Perform aim or gaze control. Action button Perform the actions defined by the game. • * Pressing G button opens Samsung Apps EI-GP20_UM_E_Eng.indd 2 Perform the actions defined by the game. Return to the Mobile Console* screen. Perform detailed directional control. Perform four-way directional control. Select button Buttons layout feature • application if Mobile Console is not installed on the device. The content of this manual is based on Android version 4.3 smartphones. The buttons may work differently depending on the game or Android version. Rejecting a incoming call while playing games Press the G button to reject a incoming call while you are playing games. Specifications Item Bluetooth Version Support profiles Specifications and description 3.0 Human Interface Device profile, Device Identification profile Size (mm) 137.78 x 86.47 x 31.80 Weight 190 g Operating temperatures Transmit power Operating range 5°C-35°C 0.25-2.5 mW Up to 10 metres Safety information To prevent injury to yourself and others or damage to your device, read the safety information about your device before using the device Do not touch the power cord with wet hands or disconnect the charger by pulling the cord Do not drop or cause an impact to the device Do not insert the device or supplied accessories into the eyes, ears, or mouth Do not store your device near or in heaters, microwaves, hot cooking equipment, or high pressure containers Do not use your device outdoor during a thunderstorm Do not store your device in very hot or very cold areas. It is recommended to use your device at temperatures from 5 °C to 35 °C Do not store your device near magnetic fields Do not use or store your device in areas with high concentrations of dust or airborne materials Keep your device dry. Do not turn on your device if it is wet. If your device is already on, turn it off and remove the battery immediately (if the device will not turn off or you cannot remove the battery, leave it as-is). Then, dry the device with a towel and take it to a service center Do not use the device for anything other than its intended use Any changes or modifications to your device can void your manufacturer’s warranty. If your device needs servicing, take your device to a Samsung Service Center FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by Samsung will void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement: FCC RF Radiation Exposure Statement: This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be colocated or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 50 mm between the radiator and your body. RF du FCC d'exposition aux radiations: Cet équipement est conforme à l'exposition de la FCC rayonnements RF limites établies pour un environnement non contrôlé. L’antenne pour ce transmetteur ne doit pas être même endroit avec d’autres émetteur sauf conformément à la FCC procédures de produits Multi-émetteur. Cet équipement doit être installé et utilisé avec une distance minimale de 50 mm entre le radiateur et votre corps. Part 15.105 (B) : Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by the manufacturer could void your authority to operate the equipment under FCC rules. 2013-09-03 오후 5:12:29 IC Statement: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Recycling Direct To dispose electronics properly, follow the recycling process regulated in your area or go to Samsung website to find the nearest recycling location: www.samsung.com/recyclingdirect Or call, (877) 278 – 0799. Samsung Telecommunications America, LLC 1301 E. Lookout Drive Richardson, Texas 75082 Phone: 1-800-SAMSUNG Phone: 1-888-987-HELP (4357) EI-GP20_UM_E_Eng.indd 2 2013-09-03 오후 5:12:29
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Instance ID : uuid:3d446d65-1b6d-4b55-a130-0fadf1cfc73c Document ID : xmp.did:564EFB3AA10FE31198AEE98E390A9F94 Original Document ID : xmp.did:2408B6800DF8E21186989FC9D8DBC69A Rendition Class : proof:pdf Version ID : 1 Derived From Instance ID : xmp.iid:9AD3A0BDA00FE31198AEE98E390A9F94 Derived From Document ID : xmp.did:46E2C576850FE3119A0FB1BFB8F62789 Derived From Original Document ID: xmp.did:2408B6800DF8E21186989FC9D8DBC69A Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:2508B6800DF8E21186989FC9D8DBC69A, xmp.iid:2608B6800DF8E21186989FC9D8DBC69A, xmp.iid:B8B8E0549AFEE211B2E2E85A49359C28, xmp.iid:6E6F45559AFEE211B2E2E85A49359C28, xmp.iid:4CDE726F9AFEE211B2E2E85A49359C28, xmp.iid:0A22947F9AFEE211B2E2E85A49359C28, xmp.iid:55E5EAA51B0EE311BAA5F4EAB2FB5C5D, xmp.iid:6B84520C1C0EE311BAA5F4EAB2FB5C5D, xmp.iid:9BC3863F1F0EE311BAA5F4EAB2FB5C5D, xmp.iid:A597DC21210EE311BAA5F4EAB2FB5C5D, xmp.iid:FA73ED7A220EE311BAA5F4EAB2FB5C5D, xmp.iid:C9A039EA220EE311BAA5F4EAB2FB5C5D, xmp.iid:041445D42C0EE311BAA5F4EAB2FB5C5D, xmp.iid:E748BFC42D0EE311BAA5F4EAB2FB5C5D, xmp.iid:A9EDECD72D0EE311BAA5F4EAB2FB5C5D, xmp.iid:BC7C28492E0EE311A47CD4D52B2F7779, xmp.iid:02FCC276850FE3119A0FB1BFB8F62789, xmp.iid:46E2C576850FE3119A0FB1BFB8F62789, xmp.iid:860B669E860FE31198AEE98E390A9F94, xmp.iid:99D3A0BDA00FE31198AEE98E390A9F94, xmp.iid:9AD3A0BDA00FE31198AEE98E390A9F94, xmp.iid:564EFB3AA10FE31198AEE98E390A9F94, xmp.iid:2BEFD4ACC90FE31198AEE98E390A9F94, xmp.iid:739A03FA2C11E31191EADBB3E58CB962, xmp.iid:FE4553513714E311BA4484664F87EED7, xmp.iid:86B7F6A94114E311B884937320830070, xmp.iid:E1570EFB4D14E311B884937320830070, xmp.iid:AD1881C74E14E311B884937320830070, xmp.iid:D0005C2A5C14E311B884937320830070, xmp.iid:C5C254B15C14E311B884937320830070, xmp.iid:2885B7EA6314E311B884937320830070, xmp.iid:BE58F4016414E311B884937320830070, xmp.iid:4BFAE4616814E311B884937320830070, xmp.iid:41BE58A66D14E311B884937320830070, xmp.iid:E5F26FBC6E14E311B884937320830070, xmp.iid:4E5615907014E311B884937320830070 History When : 2013:07:29 14:20+09:00, 2013:07:29 14:20+09:00, 2013:08:06 22:15:57+09:00, 2013:08:06 22:15:58+09:00, 2013:08:06 22:16:42+09:00, 2013:08:06 22:17:09+09:00, 2013:08:26 15:49:26+09:00, 2013:08:26 15:52:17+09:00, 2013:08:26 16:15:12+09:00, 2013:08:26 16:28:41+09:00, 2013:08:26 16:38:20+09:00, 2013:08:26 16:41:27+09:00, 2013:08:26 17:52:25+09:00, 2013:08:26 17:59:08+09:00, 2013:08:26 17:59:41+09:00, 2013:08:26 18:02:51+09:00, 2013:08:28 10:59:24+09:00, 2013:08:28 10:59:24+09:00, 2013:08:28 11:07:40+09:00, 2013:08:28 14:14:40+09:00, 2013:08:28 14:18:10+09:00, 2013:08:28 14:18:10+09:00, 2013:08:28 19:07:41+09:00, 2013:08:30 13:31:02+09:00, 2013:09:03 10:22:37+09:00, 2013:09:03 11:36:40+09:00, 2013:09:03 13:04:50+09:00, 2013:09:03 13:10:33+09:00, 2013:09:03 14:46:23+09:00, 2013:09:03 14:50:09+09:00, 2013:09:03 15:41:52+09:00, 2013:09:03 15:42:31+09:00, 2013:09:03 16:21:12+09:00, 2013:09:03 16:51:32+09:00, 2013:09:03 16:59:19+09:00, 2013:09:03 17:12:23+09:00 History Software Agent : Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5 History Changed : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Create Date : 2013:09:03 17:12:27+09:00 Modify Date : 2013:09:12 18:48:55+09:00 Metadata Date : 2013:09:12 18:48:55+09:00 Creator Tool : Adobe InDesign CS5.5 (7.5) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 5673 bytes, use -b option to extract), (Binary data 5112 bytes, use -b option to extract) Doc Change Count : 11049 Format : application/pdf Title : EI-GP20_UM_E_Eng.indd Producer : Adobe PDF Library 9.9 Trapped : False GTS PDFX Version : PDF/X-1:2001 GTS PDFX Conformance : PDF/X-1a:2001 Page Layout : SinglePage Page Count : 3 Creator : Adobe InDesign CS5.5 (7.5)EXIF Metadata provided by EXIF.tools