Samsung Electronics Co HPN5039 50-inch PDP TV Monitor User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	307297
Application ID	QZgyAo65QLltP/IPkF98ZQ==
Document Description	Users Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	149.71kB (1871339 bits)
Date Submitted	2003-03-04 00:00:00
Date Available	2003-03-04 00:00:00
Creation Date	2003-02-26 19:21:32
Producing Software	Acrobat Distiller 4.0 for Macintosh
Document Lastmod	2003-03-04 19:40:33
Document Title	Users Manual 1

Owner’s Instructions
HPN5039
SERVICE DIVISION
400 Valley Road, Suite 201
Mount Arlington, NJ 07856
TEL : 1-800-SAMSUNG (1-800-726-7864)
www.samsungusa.com
BN68-00413A-00(ENG)
Warning! Important Safety Instructions
Thank You for Choosing Samsung
Thank you for choosing Samsung! Your new Samsung product represents the latest in television
technology. We designed it with easy-to-use on-screen menus and closed captioning capabilities,
making it one of the best products in its class. We are proud to offer you a product that will provide
convenient, dependable service and enjoyment for years to come.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact
with any inside part of this product.
Important Safety Information
Always be careful when using your PDP. To reduce the risk of fire, electrical shock, and other injuries,
keep these safety precautions in mind when installing, using, and
maintaining your machine.
• Read all safety and operating instructions before operating your PDP.
• Keep the safety and operating instructions for future reference.
This symbol alerts you that important literature concerning operation and maintenance has been
included with this product.
• Heed all warnings on the PDP and in the operating instructions.
• Follow all operating and use instructions.
Note to CATV system installer: This reminder is provided to call CATV system installer's attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building as close to the point of cable entry as practical.
• Unplug the PDP from the wall outlet before cleaning. Use a damp cloth; do not use liquid or aerosol
cleaners.
• Never add any attachments and/or equipment without approval of the manufacturer. Such additions
can increase the risk of fire, electric shock, or other personal injury.
Caution: FCC/CSA regulations state that any unauthorized changes or modifications to this equipment may
void the user's authority to operate it.
• Do not use the PDP where contact with or immersion in water is a possibility, such as near bath tubs,
sinks, washing machines, swimming pools, etc.
Caution: To prevent electric shock, match the wide blade of plug to the wide slot, and fully insert the plug.
• Do not place the PDP on an unstable cart, stand, tripod, bracket,
table, or floor where it can fall. A falling PDP can cause serious injury
to a child or adult, and serious damage to the appliance. Use only
with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the PDP. Follow the manufacturer's instructions
when mounting the unit, and use a mounting accessory recommended
by the manufacturer. Move the PDP and cart with care. Quick stops,
excessive force, and uneven surfaces can make the unit and cart
unsteady and likely to overturn.
Attention: pour eviter les chocs electriques, introduire la lame le plus large de la fiche dans la borne correspondante de la prise et pousser jusqu'au fond.
Important: One Federal Court has held that unauthorized recording of copyrighted TV programs is an
infringement of U.S. copyright laws.
Certain Canadian programs may also be copyrighted and any unauthorized recording in whole or in part
may be in violation of these rights.
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
• Provide ventilation for the PDP. The unit is designed with slots in the cabinet for ventilation to protect it
from overheating. Do not block these openings with any object, and do not place the PDP on a bed,
sofa, rug, or other similar surface. Do not place it near a radiator or heat register. If you place the
PDP on a rack or bookcase, ensure that there is adequate ventilation and that you've followed the
manufacturer's instructions for mounting.
• Operate your PDP only from the type of power source indicated on the marking label. If you are not
sure of the type of power supplied to your home, consult your appliance dealer or local power company.
• Use only a grounded or polarized outlet. For your safety, this PDP is equipped with a polarized alternating current line plug having one blade wider than the other. This plug will fit into the power outlet
only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug.
If
the plug still does not fit, contact your electrician to replace your outlet.
FCC Information
• Protect the power cord. Power supply cords should be routed so that they won’t be walked on or pinched
by objects placed on or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit.
• Unplug the PDP from the wall outlet and disconnect the antenna or cable system during a lightning storm
or when left unattended and unused for long periods of time. This will prevent damage to the unit due to
lightning and power-line surges.
• Avoid overhead power lines. An outside antenna system should not be placed in the vicinity of overhead
power lines or other electric light or power circuits or where it can fall into such power lines or circuits.
When installing an outside antenna system, be extremely careful to keep from touching the power lines
or circuits. Contact with such lines can be fatal.
• Do not overload the wall outlet or extension cords. Overloading can result in fire or electric shock.
• Do not insert anything through the openings in the unit, where they can touch dangerous voltage points
or damage parts. Never spill liquid of any kind on the PDP.
• Ground outdoor antennas. If an outside antenna or cable system is connected to the PDP, be sure the
antenna or cable system is grounded so as to provide some protection against voltage surges and builtup static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.70-1984, provides information about proper grounding of the mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
• Do not attempt to service the PDP yourself. Refer all servicing to qualified service personnel. Unplug the
unit from the wall outlet and refer servicing to qualified service personnel under the following conditions:
- when the power-supply cord or plug is damaged
- if liquid has been spilled on the unit or if objects have fallen into the unit
- if the PDP has been exposed to rain or water
- if the PDP does not operate normally by following the operating instructions
- if the PDP has been dropped or the cabinet has been damaged
- when the PDP exhibits a distinct change in performance
• If you make adjustments yourself, adjust only those controls that are covered by the operating instructions. Adjusting other controls may result in damage and will often require extensive work by a qualified
technician to restore the PDP to normal.
• When replacement parts are required, be sure the service technician uses replacement parts specified by
the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in additional damage to the unit.
• Upon completion of any service or repairs to this PDP, ask the service technician to perform safety checks
to determine that the PDP is in a safe operating condition.
• The PDP can properly operate in a temperature range of 32~104°F(0~40°C) and 80% humidity.
Do not use in a hot and humid place.
• Before moving the PDP equipped with speakers, separate the speakers from the PDP. If you move the PDP
with the speakers attached, it may result in damage or injury.
User Instructions
Warning
The Federal Communications Commission Radio
Frequency Interference Statement includes the following warning:
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation .
User must use shielded signal interface cables to
maintain FCC compliance for the product.
Provided with this monitor is a detachable power
supply cord with IEC320 style terminations.
It may be suitable for connection to any UL Listed
personal computer with similar configuration.
Before making the connection, make sure the voltage rating of the computer convenience outlet is
the same as the monitor and that the ampere rating of the computer convenience outlet is equal to
or exceeds the monitor voltage rating.
For 120 Volt applications, use only UL Listed
detachable power cord with NEMA configuration
5-15P type (parallel blades) plug cap. For 240
Volt applications use only UL Listed Detachable
power supply cord with NEMA configuration
6015P type (tandem blades) plug cap.
If this equipment does cause harmful interference
to radio or television receptions, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
User Information
Changes or modifications not expressly approved
by the party responsible for compliance could
void the user’s authority to operate the equipment.
If necessary, consult your dealer or an experienced radio/television technician for additional
suggestions. You may find the booklet called How
to Identify and Resolve Radio/TV Interference
Problems helpful. This booklet was prepared by
the Federal Communications Commission. It is
available from the U.S. Government Printing
Office, Washington, DC 20402, Stock Number
004-000-00345-4 .
IC Compliance Notice
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations of ICES-003.
Cet appareil Numérique de classe B respecte
toutes les exigences du Règlemont NMB-03 sur les
équipements produisant des interférences au
Canada.
Notice de Conformité IC
Cet appareil numérique de classe B respecte
toutes les exigences du Règlement ICES-003 sur
les équipements produisant des interférences au
Canada.
VCCI
This is a Class B product based on the standard
of the Voluntary Control Council for Interference
by Information Technology Equipment (VCCI). If
this is used near a radio or television receiver in a
domestic environment, it may cause radio interference. Install and use the equipment according to
the instruction manual.
The party responsible for product compliance:
SAMSUNG ELECTRONICS CO., LTD
America QA Lab of Samsung
3351 Michelson Drive,
Suite #290, Irvine, CA92612 USA
Important Warranty Information
Regarding Television Format Viewing
Table of Contents
Wide screen format PDP Displays (16:9,the aspect ratio of the screen width to height) are primarily
designed to view wide screen format full-motion video.The images displayed on them should primarily be
in the wide screen 16:9 ratio format,or expanded to fill the screen if your model offers this feature and constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the
total television viewing per week.
General Information
Channel Control
Your New Plasma Display Panel ....................10
Fine Tuning Channels ..................................60
Remote Control Buttons ................................12
LNA (Low Noise Amplifier) ..........................61
Additionally,viewing other stationary images and text such as stock market reports, video game
displays,station logos,web sites or computer graphics and patterns,should be limited as described above
for all televisions. Displaying stationary images that exceed the above guidelines can
cause uneven aging of PDP Displays that leave subtle,but permanent burned-in
ghost images in the PDP picture.To avoid this,vary the programming and images,
and primarily display full screen moving images,not stationary patterns or dark bars.
On PDP models that offer picture sizing features,use these controls to view different formats as a full screen
picture.
Connections
Connecting to a PC ....................................64
Connecting VHF and UHF Antennas ..............20
Adjusting the PC Screen ..............................68
Connecting Cable TV ..................................21
Changing the Position of the Image................69
Connecting Speakers ..................................23
Changing the Size of the Image ..................70
Connecting a VCR ......................................24
Information ................................................71
Connecting a Camcorder ............................25
Picture Quality Adjustment ..........................72
Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a
result of format selection and use,as well as burned-in images, are not covered by your Samsung limited
warranty.
Wall Installation Instructions ..........................14
Connecting a PC and Operation
Connecting a DVD Player ............................26
Connecting a DTV Receiver ..........................27
Time Setting
Setting the Clock ........................................76
User Instructions
Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma
display panel for more than several minutes as it can cause screen image retention. This image retention is
also known as “screen burn”. To avoid such image retention, refer to page 40 of this manual to reduce the
degree of brightness and contrast of this screen when displaying a still image.
Operation
Setting the Sleep Timer ................................77
Turning the PDP On and Off ........................30
Setting the Timers ........................................78
Memorizing the Channels ............................32
Setting the Preferred Channel and Volume Level ....80
Setting Up Your Remote Control ....................36
Function Description
Picture Control
Selecting a Menu Language ........................82
Customizing the Picture ..............................40
Viewing Closed Captions ............................83
Using Automatic Picture Settings ..................41
Digital Noise Reduction ..............................84
Selecting the Color Tone ..............................42
Setting Auto Power Off ................................85
Viewing the Picture-in-Picture ........................43
Using the V-Chip..........................................86
Changing the Screen Size ..........................49
Cell Defect
The plasma display panel consists of fine cells. Although the panels are produced with more than 99.9
percent active cells, there may be some cells that do not produce light or remain lit.
Freezing the Picture ...................................50
Appendix
Troubleshooting ..........................................94
Sound Control
Care and Maintenance ................................95
Altitude
Customizing the Sound ................................52
Specifications..............................................96
The PDP will not operate normally at altitudes above 6500 ft.
Using Automatic Sound Settings ...................53
Choosing a Multi-Channel Sound (MTS)Soundtrack ......54
Using the Auto Volume ................................55
Using Dolby Virtual......................................56
Using a Subwoofer ......................................57
P
General Information
Your New Plasma Display Panel ....................................................10
Remote Control Buttons ................................................................12
Wall Installation Instructions ..........................................................14
Your New Plasma Display Panel
Front Panel
Rear Panel
Speakers
(optional)
Remote Control
Signal Receiver
Aim the remote
control towards
this spot on the PDP.
SOURCE button
Press to display all of the available video sources
(ie., Video, S-Video, Component1, Component2, PC ).
Power Indicator
MENU button
Power Off : LED Red
Power On (Timer On) : LED Green
Power On (Timer Off): LED Off
Displays the main on-screen menu.
VOL(+,-) button
Press to increase or decrease the volume. Also used
to select or adjust items on the on-screen menu.
ΠService jack
CH(▼,▲) button
´ DVI Input jacks
Press CH▲ or CH▼ to change Channels.
Also used to move up or down in the On-screen menu.
Receives the digital video/audio signals
from a set top box or PC.
POWER button
ˇ PC(RGB) Input jacks(15pin)
Press to turn the PDP on and off.
Connect to the video/audio output jacks
on your PC.
Checking Accessories
¨S-Video Input jacks
Connect a S-Video/audio signals from
external sources such VCRs or DVD players.
ˆ Video Input jacks
Remote Control (BN59-00347A)
/AAA Batteries (4301-000103)
10
(AA39-00300A) (AA39-00034B)
(AA39-00033A)
Audio/Video Cables
Power Cord
Ferrite Cores(3EA)
(AA39-10004E)
(3301-001110)
PC Cable
S-Video Cable
Antenna Cable
Speaker Cables
Owner’s Instructions
(AA39-00288A)
(AA39-40001E)
(BN39-00333A)
(BN39-00315A)
(BN68-00384A)
Connect a video/audio signals from external
sources such VCRs or DVD players.
Ø Component Video/Audio Input jacks
(Y/Pb/Pr/Audio L/Audio R)
Connect to the audio and component output
jacks of a DVD player or Set-Top Box.
∏ External Speaker Out jacks
Connect external speakers.
” Antenna jack
Connect to antenna.
’ Sub-woofer speaker output jack
Connect to the Sub-woofer speaker jack.
˝ Power Input jack
Connect the supplied power cord.
11
Remote Control Buttons
˘ Sleep button
Press to select a preset time interval for automatic
shutoff.
¿ CH.Scan button
Remote Control
Flip the cover open
in the arrow direction.
Press to memorize(scan) the available channels.
¸ Caption button
Controls the caption decoder.
˛ PIP control buttons
ΠPower button
Turns the PDP on and off.
´ Number buttons
ˇ +100 button
Press to select channels over 100. For example, to select
channel 121, press “+100”, then press “2” and “1.”
¨ Menu button
Displays the main on-screen menu.
ˆ CH (Channel) and VOL (Volume) buttons
Use it to switch channels or adjust volume.
Ø Mute button
Press to mute the PDP sound.
∏ PIP button
Activates picture in picture.
” Aspect button
Press to change the screen size.
’ P.Mode button
Adjust the PDP picture by selecting one of the preset
factory settings (or select your personal, customized
picture settings.)
˝ S.Mode button
Adjust the PDP sound by selecting one of the preset
factory settings (or select your personal, customized
sound settings.)
Source : Press to select one of the available signal
sources for the PIP window.
Swap : Exchanges the video signal that is currently
displayed on the main screen with the signal
in the PIP window.
Locate : Press to move the PIP window on the screen.
S.Swap: Press to select the audio (PIP or Main).
Size
: Press to make the PIP window Large, Small
or Double.
CH▲,▼ : Displays the available channels in sequence.
(These buttons change channels in the PIP
window only).
◊ Auto Program button
The TV automatically cycles through all of the available
channels and stores them in memory.
± SET button
Used during setup of this remote control, so that it will
work compatibly with other devices (VCR, cable box,
DVD, etc.)
≠ Add/Erase button
Press to add or erase channels in the TV’s memory.
– VCR, DVD control buttons
Controls VCR tape or DVD disc functions: Stop, Rewind,
Play/Pause, Fast Forward.
Ô Mode button
Selects a target device to be controlled by the Samsung
remote control (ie., VCR, Cable, or DVD players).
 Pre-CH button
Installing the Batteries in Your Remote Control
Tunes to the previous channel.
Ò Source button
Press to display all of the available video sources
(ie., Video, S-Video, Component1, Component2, PC, DVI).
Ú Joystick button
Use it to move between options, select an option or
adjust the On-screen menu.
cover
1 toSlideopenthethebackbattery
compartment of the
remote control.
Install two AAA size batterthe cover back into
2 ies.
3Slide
Make sure to match the
place.
“+” and “-” ends of the batteries with the diagram
inside the compartment.
Æ Display button
Press to display information on the PDP screen.
ı Still button
Press to pause the current screen.
˜ MTS button
Press to choose stereo, mono or Separate Audio
Program (SAP broadcast).
¯ Dolby Virtual button
12
This feature allows the TV’s L/R speakers to provide a
Home Theater-like Dolby effect. The center and surround
sounds are mixed into the L/R speakers.
Remote Control Operation Range.
You can use your remote control within a distance of 23 feet and an angle of 30 degrees
from the left and right sides of the remote control receiver of the PDP.
13
Wall Installation Instructions
Installation Notes
Do not install the PDP in any location other than a vertical wall.
Remove the screws on the rear of the PDP panel.
To protect the performance of the PDP and prevent problems, avoid the following
places.
•
•
•
•
Fixing the PDP panel to the wall attachment panel bracket
Do
Do
Do
Do
not
not
not
not
install
install
install
install
next to smoke and fire detectors.
in an area subjected to vibration.
in an area subjected to high voltage.
near or around any heating apparatus.
Use only recommended parts and components.
Removing four screws
Connect plastic hangers to screws. (see the illustration below)
Parts (Wall attachment panel is sold separately. Check with your dealer)
Wall attachment panel
1. Contact an authorized technician when installing the wall attachment panel.
2. After hanging the PDP panel on the wall attachment panel, make sure that
the plastic hangers are completely hung.
3. Be careful so that fingers are not caught.
4. Make sure the wall attachment panel brackets are tightened.
Otherwise, the PDP panel may fall down and you might be hurt.
Plastics for hangings
(6 EA)
Tighten the screws connected to the plastic hangers on the rear of the PDP panel.
Screws
(6 EA)
Removing four screws
14
15

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:03:04 19:40:33-05:00
Create Date                     : 2003:02:26 19:21:32+09:00
Page Count                      : 8
Mod Date                        : 2003:03:04 19:40:33-05:00
Creation Date                   : 2003:02:26 19:21:32+09:00
Producer                        : Acrobat Distiller 4.0 for Macintosh
Metadata Date                   : 2003:03:04 19:40:33-05:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools