Samsung Electronics Co HPN5039 50-inch PDP TV Monitor User Manual 3
Samsung Electronics Co Ltd 50-inch PDP TV Monitor Users Manual 3
Contents
- 1. Users Manual 1
- 2. Users Manual 2
- 3. Users Manual 3
Users Manual 3
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 307299 |
| Application ID | QZgyAo65QLltP/IPkF98ZQ== |
| Document Description | Users Manual 3 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 91.11kB (1138834 bits) |
| Date Submitted | 2003-03-04 00:00:00 |
| Date Available | 2003-03-04 00:00:00 |
| Creation Date | 2003-02-26 19:22:21 |
| Producing Software | Acrobat Distiller 4.0 for Macintosh |
| Document Lastmod | 2003-02-28 19:09:35 |
| Document Title | Users Manual 3 |
Picture Control
Customizing the Picture ................................................................40
Using Automatic Picture Settings ....................................................41
Selecting the Color Tone................................................................42
Viewing the Picture-in-Picture..........................................................43
Changing the Screen Size ............................................................49
Freezing the Picture ......................................................................50
1
Customizing the Picture
Using Automatic Picture Settings
You can use the on-screen menus to change the Contrast, Brightness, Sharpness, Color,
and Tint settings of your PDP.
Your PDP has automatic picture settings that allow you to adjust the video display easily.
Press the Menu button, then press the joystick to
enter.
Move
Move the joystick up or down to select “Adjust”,
then press the joystick to enter.
You will also see the items “Contrast”, “Brightness”,
“Sharpness”, “Color” and “Tint”.
Move the joystick up or down to select the item you
wish to change.
Move the joystick left or right to select “Custom”,
“Dynamic”, “Standard” or “Movie” picture setting.
• You can select “High”, “Middle”, “Low” or
“Custom” in PC/DVI mode.
80
50
50
50
G 50
Custom
Custom
Select
Exit
Picture
Mode
Adjust
Color Tone
Move
Exit
Adjust
Adjust
Picture
Mode
Adjust
Color Tone
Move
Normal
Enter
Quick way to access the picture setting: Just
press the “P.Mode” button on the remote control.
Exit
Custom
Contrast
Brightness
Sharpness
Color
Tint
R 50
Dynamic
Custom
Select
Exit
Press the Menu button to exit.
Exit
Move the joystick left or right to change the value of
the item.
Contrast
Select
Press the Menu button, then press the joystick to
enter.
Custom
Picture
Move
Custom
Mode
Adjust
Color Tone
Move
Picture
Mode
Adjust
Color Tone
82
Press the Menu button to exit.
Note
• In the PC/DVI mode, you can’t adjust the Sharpness, Color and Tint.
• The Tint doesn’t operate in Component(480p, 720p, 1080i) mode.
40
41
Selecting the Color Tone
Press the Menu button, then press the joystick to
enter.
Picture
Mode
Adjust
Color Tone
Move
Move the joystick up or down to select “Color
Tone”, then move the joystick left or right to select
“Normal”, “Warm1”, “Warm2”, “Cool2” or
“Cool1”.
• You can select “Custom”, “Color1”, “Color2” or
“Color3” in PC mode.
• You can select “Color1”, “Color2” or “Color3” in
DVI mode.
Viewing the Picture-in-Picture
Selecting the PIP Screen
Custom
Custom
Select
Press the Menu button. Move the joystick up or
down to select “PIP”, then press the joystick to
enter.
PIP
Select
Off
Exit
Quick way to access the PIP: Just press the
“PIP” button on the remote control.
Select
Exit
Picture
Mode
Adjust
Color Tone
Move
Custom
Normal
Select
Exit
Move the joystick left or right to select “On”.
The PIP image will appear in the corner of the
screen.
PIP
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Press the Menu button to exit.
Move
On
TV
Large
Ant
Ant 5
Select
Exit
Press the Menu button to exit.
O : PIP and Swap Operate
X : PIP doesn’t Operate
PIP Settings
PIP screen
Main screen
TV
Video
S-Video
Component 1
Component 2
PC
DVI
42
TV
Video
S-Video
Component 1
Component 2
PC
DVI
43
Selecting an External Signal
Swapping the Contents of the PIP Image and Main Image
You can use PIP to view a signal from an external source, such as a VCR.
Press the Menu button. Move the joystick up or
down to select “PIP”, then press the joystick to
enter.
Quick way to access the PIP source: Just press
“Source” button in the cover on the remote control.
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Move
Ant
Ant 5
Select
Move the joystick left or right to cycle through
all of the available signal sources:
“TV”, “Video”, “S-Video”, “Component 1”,
“Component 2”, “PC” and “DVI”.
Quick way to access swapping: Just press the
“Swap” button on the remote control.
On
TV
Move the joystick up or down to select “Swap”,
then press the joystick to enter.
• The image in the PIP window will appear on the
main screen, and vice versa.
Large
Ant
Ant 5
Select
Move
On
TV
Large
Ant
Ant 5
Select
Exit
PIP
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Move
On
TV
Large
Ant
Ant 5
Enter
Exit
Exit
PIP
Select
Source
Swap
Size
Locate
PIP
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Exit
PIP
Move
Press the Menu button. Move the joystick up or
down to select “PIP”, then press the joystick to
enter.
Large
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
The signal from these inputs will not appear if you
have not connected any equipment to the PDP’s
input jacks.
On
TV
Move the joystick up or down to select “Source”.
Move
PIP
On
Video
Press the Menu button to exit.
Large
Select
Exit
Press the Menu button to exit.
Selecting the Sound Source
S.Swap
Press the S.Swap button to switch between the Main or Sub
(PIP) audio source.
Note
• The PIP function operates in Wide screen.
• Using Multi-Screen in the Normal, Zoom1 or Zoom2 screen will change the size of the main screen
to Wide screen.
44
45
Changing the Location of the PIP Image
Changing the Size of the PIP Window
Press the Menu button. Move the joystick up or
down to select “PIP”, then press the joystick to
enter.
Quick way to access the PIP size: Just press the
“Size” button in the cover on the remote control.
Move
46
Large
Select
Move the joystick left or right to select “Small”,
“Double” or “Large”.
Press the Menu button to exit.
Exit
PIP
On
TV
Press the Menu button. Move the joystick up or
down to select “PIP”, then press the joystick to
enter.
Ant
Ant 5
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Quick way to access the PIP location: Just press
the “Locate” button on the remote control.
Exit
On
TV
Move the joystick left or right to move the PIP screen
where you want.
Small
Ant
Ant 5
Select
Exit
Ant
Ant 5
Select
Exit
On
TV
Large
Ant
Ant 5
Select
Exit
PIP
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Move
Large
PIP
Move
PIP
Move
On
TV
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Ant
Ant 5
Select
PIP
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Move the joystick up or down to select “Locate”.
Large
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Move
On
TV
Move the joystick up or down to select “Size”.
Move
PIP
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
On
TV
Large
Ant
Ant 5
Select
Exit
Press the Menu button to exit.
47
Changing the Screen Size
Changing the PIP Channel
When you press the Aspect button on the remote control, the PDP’s screen mode should appear in
sequence. The screen displays in this order: Wide, Panorama, Zoom1, Zoom2, Normal.
Note
Press the Menu button. Move the joystick up or
down to select “PIP”, then press the joystick to
enter.
Quick way to change the PIP channel: Just press the
“CH▲,▼” buttons under the cover of the remote control.
Move the joystick up or down to select “Ant/CATV”.
Move the joystick left or right to select “Ant”, “STD”,
“HRD” or “IRC”.
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Move
Move the joystick up or down to select “Channel”.
Move the joystick left or right to change the channel
that appears in the PIP window. You can also press
PIP CH▲, ▼ buttons on the remote control.
Large
W ide
Zoom2
Sets the picture to 16:9 wide mode.
The screen size when the Zoom1 screen is
vertically enlarged.
Ant
Ant 5
Select
Exit
PIP
On
TV
Wide
Zoom2
Up/Down
Large
STD
STD 5
Select
Exit
Panorama
Normal (4:3)
Converts regular 4:3 aspect ratio screen to
wide screen.
Sets the picture to 4:3 normal mode.
PIP
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Move
Press the Menu button to exit.
On
TV
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Move
• If you watch a still image or the Normal (4:3) mode for a long time (over 2 hours) on image may be
burned on to the screen, view the monitor in Wide or Panorama mode as much as possible.
PIP
On
TV
Large
STD
STD 9
Select
Panorama
Normal
Exit
Zoom1
The screen size when Wide screen is vertically
enlarged
Zoom1
Up/Down
Notes
48
• In TV, VIDEO, S-VIDEO and Component(480i) modes, all screen modes can be selected.
(Wide ➝ Panorama ➝ Zoom1 ➝ Zoom2 ➝ Normal).
• In PC/DVI mode, only Wide & Normal modes can be selected.
• In Component(480p, 720p. 1080i) modes, Panorama mode can’t be selected.
• In Component(480p, 720p. 1080i) modes, you can move the picture on screen pressing
the Up▲ or Down▼ button. (All screen modes)
• Changing the screen size to Normal, Zoom1 or Zoom2 during PIP mode will cause the PIP
window to disappear.
49
Freezing the Picture
Still
Press the Still button on the remote control to freeze a
moving picture. Press again to cancel.
Sound Control
Customizing the Sound ................................................................52
Using Automatic Sound Settings ....................................................53
Choosing a Multi-Channel Sound (MTS)Soundtrack ..........................54
Using the Auto Volume ..................................................................55
Using Dolby Virtual ......................................................................56
Using a Subwoofer ......................................................................57
50
Customizing the Sound
Press the Menu button. Move the joystick up or
down to select “Sound”, then press the joystick
to enter.
Move the joystick up or down to select “Adjust”,
then press the joystick to enter.
You will also see the items “Bass”, “Treble” and
“Balance”.
Move the joystick up or down to select the item you
wish to change.
52
Select
Quick way to access the sound setting: Just
press the “S.Mode” button on the remote control.
Exit
Move
Custom
Move the joystick left or right to select “Custom”,
“Standard”, “Music”, “Movie” or “Speech” sound
setting.
Mono
Off
Off
Enter
L 50
Adjust
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
50
50
R 50
Mono
Off
Off
Select
Exit
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move
Exit
Custom
Music
Off
Off
Select
Exit
Press the Menu button to exit.
Exit
Move the joystick left or right to change the value of
the item.
Bass
Off
Off
Adjust
Bass
Treble
Balance
Press the Menu button. Move the joystick up or
down to select “Sound”, then press the joystick
to enter.
Mono
Sound
Move
Custom
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move
Using Automatic Sound Settings
82
Press the Menu button to exit.
53
Choosing a Multi-Channel Sound (MTS)
Soundtrack
Using the Auto Volume
Each broadcasting station has its own signal conditions, which can make it necessary to
adjust the volume every time the channel is changed. “Auto volume” lets you automatically
adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
Depending on the particular program being broadcast, you can listen to stereo, mono,
or a Separate Audio Program. (SAP audio is usually a foreign-language translation.
Sometimes SAP has unrelated information like news or weather.)
Press the Menu button. Move the joystick up or
down to select “Sound”, then press the joystick
to enter.
Quick way to access the MTS menu: Just press
the “MTS” button on the remote control.
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move
Move the joystick left or right to select “Mono”,
“Stereo” or “SAP”.
Select
Exit
Standard
Move
Move the joystick up or down to select “Auto
Volume”.
Off
Off
Select
Move the joystick right to select “On”.
Off
Off
Select
Exit
Press the Menu button to exit.
•
Choose Stereo for channels that are broadcasting in stereo.
•
Choose Mono for channels that are broadcasting in mono, or if you are having difficulty receiving
a stereo signal.
•
Choose SAP to listen to the Separate Audio Program, which is usually a foreign-language translation.
Move
Mono
Off
Off
Select
Exit
Standard
Mono
Off
Off
Select
Exit
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Stereo
Custom
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move
Exit
Standard
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move
Mono
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Press the Menu button. Move the joystick up or
down to select “Sound”, then press the joystick
to enter.
Off
Off
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Mono
Move the joystick up or down to select “MTS”.
Move
Custom
Standard
Mono
On
Off
Select
Exit
Press the Menu button to exit.
Note
• The MTS function operates in TV mode only.
54
55
Using Dolby Virtual
Using a Subwoofer
This feature allows the PDP’s optional L/R speakers to provide a Home Theater-like Dolby
effect. The center and surround sounds are mixed into the L/R speakers.
Press the Menu button. Move the joystick up or
down to select “Sound”, then press the joystick
to enter.
Quick way to access the Dolby Virtual: Just press
the “Dolby Virtual” button on the remote control.
Move the joystick up or down to select “Dolby
Virtual”.
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move the joystick left or right to select “On”.
Mono
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Off
Off
Select
Move
Exit
Move the joystick up or down to select “Woofer”,
then press the joystick to enter.
Standard
Custom
Mono
Off
Off
Select
Exit
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Mono
Move
Standard
Mono
Off
Off
Enter
Exit
Off
Off
Select
Exit
Move the joystick left or right to select “On”.
Woofer
Woofer
Volume
Cutoff Freq.
On
50
120Hz
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move
Custom
Sound
Move
Press the Menu button. Move the joystick up or
down to select “Sound”, then press the joystick
to enter.
Standard
Move
Select
Exit
Mono
Off
On
Select
Exit
Move the joystick up or down to select “Volume”,
then move the joystick left or right to adjust the
value of the item.
This sets the volume for the subwoofer.
Woofer
Woofer
Volume
Cutoff Freq.
On
50
120Hz
Press the Menu button to exit.
Move
Adjust
Exit
Volume
56
Move the joystick up or down to select “Cutoff
Freq.”, then move the joystick left or right to adjust
the value of the item.
This sets the cutoff frequency for the subwoofer.
For example, if you set the cutoff frequency at
130Hz, the subwoofer will reproduce frequencies
of 130Hz and lower.
65
Woofer
Woofer
Volume
Cutoff Freq.
Move
On
50
130Hz
Adjust
Exit
Press the Menu button to exit.
57
P
Channel Control
Fine Tuning Channels....................................................................60
LNA (Low Noise Amplifier) ............................................................61
1
Fine Tuning Channels
LNA (Low Noise Amplifier)
Use fine tuning to manually adjust a particular channel for optimal reception.
If the TV is operating in a weak-signal area, sometimes the LNA function can improve
the reception (a low-noise preamplifier boosts the incoming signal).
Press the Menu button. Move the joystick up or
down to select “Channel”, then press the joystick to
enter.
Channel
Ant/ CATV
Auto Program
Fine Tune
LNA
Move
Move the joystick up or down to select “Fine Tune”.
Move the joystick left or right to adjust the fine
tuning.
To store the fine tuning setting in the TV’s memory,
move the joystick up. (A star icon<*>will appear.)
To reset the fine tuning to “0”, move the joystick
down.
60
Press the Menu button. Move the joystick up or
down to select “Channel”, then press the joystick to
enter.
Exit
Air
Move the joystick up or down to select “LNA”.
Exit
Channel
Air
+3
Move the joystick left or right to select LNA “On.”
• Moving the joystick left or right will alternate
between “On” and “Off.”
Off
Adjust
Exit
Channel
Air / CATV
Auto Program
Fine Tune
LNA
Air
Select
Exit
Air
Off
Select
Exit
Channel
Air / CATV
Auto Program
Fine Tune
LNA
Move
Off
Channel
Move
Ant
Air / CATV
Auto Program
Fine Tune
LNA
Off
Adjust
Channel
Ant/ CATV
Auto Program
Fine Tune
LNA
Move
Air / CATV
Auto Program
Fine Tune
LNA
Add/Erase
Select
Channel
Add/Erase
Off
Air / CATV
Auto Program
Fine Tune
LNA
Move
Ant
Air
On
Select
Exit
Press the Menu button to exit.
+3
Off
Adjust
Exit
Press the Menu button to exit.
61
P
Connecting a PC and Operation
Connecting to a PC ......................................................................64
Adjusting the PC Screen................................................................68
Changing the Position of the Image................................................69
Changing the Size of the Image ....................................................70
Information ..................................................................................71
Picture Quality Adjustment ............................................................72
Connecting to a PC
Connection to a Macintosh PC may require an adaptor that fits the PC terminal.
PDP
Pin Configuration
D-Sub Cable
DVI-D Cable (Digital-Only Connector)
• 15Pin Signal Cable (based on protruded pin)
Power Plug
Use the DVI-D
connection cable.
(sold separately)
DVI Cable
Ferrite Cores (3301-001110)
or
Video Cable
Audio Cable
Setting up Your PDP (Plug and Play)
DVI jack
(The actual configuration on your PC
may be different,
depending on the
model.)
PC
Our adoption of the new VESA Plug and Play solution eliminates complicated and time consuming
setup. It allows you to install your monitor in a Plug and Play compatible system, without the usual
setup hassles and confusion. Your PC system can easily identify and configure itself for use with your
display. This monitor automatically tells the PC system its Extended Display Identification data (EDID)
using Display Data Channel (DDC) protocols.
Connecting a PC to the PDP
Connect a PC (15pin) cable between the Video Output jack(or DVI jack) on the PC and the
RGB IN(or DVI IN) Input jack (15p D-SUB) on the PDP.
Connect a Audio cable between the Audio (RGB or DVI) on the PC and the Audio L/R (RGB
or DVI) input jacks on the PDP.
To watch the PC screen:
1. Turn on your PDP, and press the Source button on the remote control.
2. Move the joystick up or down to select the “PC”, then press the joystick to enter.
3. Turn on PC and check for PC system requirements. (Refer to pages 66 and 67
for PC system requirements.)
3. Adjust the PC screen. (Refer to pages 68 and 74.)
64
65
How to Set up Your PC Software (Windows only)
The Windows display-settings for a typical computer are shown below. However, the actual screens
on your PC will probably be different, depending upon your particular version of Windows and your
particular video card. But even if your actual screens look different, the same, basic set-up information
will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
Notes:
Both screen position and size will vary, depending on the type of PC monitor and its resolution.
The table below shows all of the display modes that are supported:
Video signal
On the windows screen, select in the following
sequence : Start ➝ Settings ➝ Control Panel.
Dot X Line
Vertical
Frequency (Hz)
Horizontal
Frequency (KHz)
Vertical
polarity
Horizontal
polarity
640 X 350
70.086
31.469
85.080
37.861
70.087
31.469
85.039
37.927
59.940
31.469
72.809
37.861
75.000
37.500
85.008
43.269
56.250
42.925
N/P
N/P
60.317
37.879
72.188
48.077
75.000
46.875
85.061
53.674
60.004
48.363
70.069
56.476
75.029
60.023
84.997
68.677
1280 X 1024*
60.020
63.981
1366 X 768*
60.000
48.200
720 X 400
640 X 480
IBM PC / AT
Compatible
800 X 600
When the control panel screen appears, click on
“Display” and a display dialog-box will appear.
1024 X 768
Select the “Settings” tab in the display dialogbox.
The two key variables that apply the PDP-PC
interface are “resolution” and “colors”.
The correct settings for these two variables are:
• The PDP operates abnormally if a non-standard video format is selected.
• Size (sometimes called “resolution”):
640 x 480 pixels.
Notes:
• Color: “24-bit” color (might also be expressed as “16 million colors”)Shown at left is
a typical screen for “Display” dialog box.
• Depending on the manufacturer, your PC display screen might appear different.
(and depending on your particular version of Windows).
If a vertical-frequency option exists on your
display settings dialog box, the correct value is
“60” or “60 Hz.” Otherwise, just click “OK”
and exit the dialog box.
Continued...
66
• The interlace mode is not supported.
• When this PDP is used as a PC display, 32-bit color is supported.
Check your PC instruction book for information about connecting your PC to a PDP.
• If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5kHZ
(horizontal).
• In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power
is turned off (or if the PC is disconnected). If so, press the Source button to enter the VIDEO mode.
Also, make sure that the PC is connected.
• Connect only a PC monitor to the monitor output port while viewing the PC screen. (Otherwise,
random signals might appear).
67
Adjusting the PC Screen
Changing the Position of the Image
Adjusting the R.G.B
After connecting the PDP to your PC, adjust the position of the screen if it is not well-aligned.
Preset:
• Press the Source button, then move the joystick up or down to select PC. Press the joystick to select PC mode.
Preset:
• Press the Source button, then move the joystick up or down to select PC. Press the joystick to select PC mode.
Press the Menu button, then press the joystick to
enter.
Press the Menu button. Move the joystick up or
down to select “PC”, then press the joystick to enter.
Picture
Mode
Adjust
Color Tone
Color Adjust
Move
Move the joystick up or down to select “Color
Tone”, then move the joystick left or right to select
“Custom”. When “Custom” is selected, the word
“Color Adjust” will appear on the screen.
Custom
PC
Position
Adjust
Scaling
Information
Auto Adjust
Custom
Move
Select
Exit
Press the joystick to enter, then adjust the screen
position by using the joystick button.
Move the joystick up or down to select “Color
Adjust”, then move the joystick to enter.
Custom
Custom
Exit
Move
Exit
Press the Menu button to exit.
Picture
Move the joystick up or down to select the item you
want to change, then move the joystick right or left
to change the value of the item, using the on-screen
gauge as your guide.
Custom
Custom
Enter
Exit
Adjust
Red
Green
Blue
Move
Red
68
Select
Mode
Adjust
Color Tone
Color Adjust
Move
Exit
Picture
Mode
Adjust
Color Tone
Color Adjust
Move
Enter
Position
Move
Wide
50
50
50
Adjust
Exit
82
Press the Menu button to exit.
69
Changing the Size of the Image
Preset:
Preset:
• Press the Source button, then move the joystick up or down to select PC. Press the joystick to select PC mode.
• Press the Source button, then move the joystick up or down to select PC. Press the joystick to select PC mode.
Press the Menu button. Move the joystick up or
down to select “PC”, then press the joystick to enter.
Exit
Wide
Select
PC
Position
Adjust
Scaling
Information
Auto Adjust
Move
PC
Move the joystick up or down to select “Information”, then press the joystick to enter.
The vertical, horizontal frequencies and resolution
appear.
Enter
Wide
Enter
Exit
Information
Resolution
H-Frequency
V-Frequency
Normal
Select
Exit
PC
Position
Adjust
Scaling
Information
Auto Adjust
Move
Exit
Wide
PC
Position
Adjust
Scaling
Information
Auto Adjust
Move
Enter
Position
Adjust
Scaling
Information
Auto Adjust
Move the joystick left or right to select “Wide”
or “Normal”.
Press the Menu button. Move the joystick up or
down to select “PC”, then press the joystick to enter.
Wide
Move the joystick up or down to select “Scaling”.
Move
PC
Position
Adjust
Scaling
Information
Auto Adjust
Move
70
Information
1024 * 768
48.52 KHz
60.21 Hz
Exit
Exit
Press the Menu button to exit.
Press the Menu button to exit.
71
Picture Quality Adjustment
Picture Automatic Adjustment
Coarse Adjustment
Preset:
Preset:
• Press the Source button, then move the joystick up or down to select PC. Press the joystick to select PC mode.
• Press the Source button, then move the joystick up or down to select PC. Press the joystick to select PC mode.
Press the Menu button. Move the joystick up or
down to select “PC”, then press the joystick to enter.
Position
Adjust
Scaling
Information
Auto Adjust
Move
Move the joystick up or down to select “Auto
Adjust”, then move the joystick left or right to enter.
Press the Menu button, move the joystick up or
down to select “PC”, then press the joystick to enter.
Wide
Enter
PC
Position
Adjust
Scaling
Information
Auto Adjust
Move
Exit
PC
Position
Adjust
Scaling
Information
Auto Adjust
Move
PC
Move the joystick up or down to select “Adjust”,
then move the joystick left or right to enter.
Wide
Enter
The message “Auto Adjust” appears on the screen
and the picture adjustments are automatically
activated.
Exit
Adjust
50
Adjust
Exit
Press the Menu button to exit.
Coarse
72
Enter
Corase
Fine
Move
Wide
Move the joystick up or down to select “Coarse”.
Remove picture noise (vertical stripes) on the screen
by moving the joystick left or right. (If Coarse is
not set properly, vertical stripes will appear on the
screen.)
Exit
PC
Move
Auto Adjust
Enter
Position
Adjust
Scaling
Information
Auto Adjust
Exit
Wide
53
Move the Menu button to exit.
73
Fine Tuning (Fine)
Preset:
• Press the Source button, then move the joystick up or down to select PC. Press the joystick to select PC mode.
Press the Menu button. Move the joystick up or
down to select “PC”, then press the joystick to enter.
PC
Position
Adjust
Scaling
Information
Auto Adjust
Move
Move the joystick up or down to select “Adjust”,
then move the joystick left or right to enter.
Enter
Exit
PC
Position
Adjust
Scaling
Information
Auto Adjust
Move
Wide
Wide
Enter
Exit
Move the joystick up or down to select “Fine”.
Adjust
50
Corase
Fine
Remove picture noise (vertical stripes) on the screen
by moving the joystick left or right. (If Fine is
not set properly, vertical stripes will appear on the
screen.)
Move
Adjust
Time Setting
Exit
Setting the Clock .......................................................................76
Setting the Sleep Timer...............................................................77
Fine
74
Move the Menu button to exit.
53
Setting the Timers ......................................................................78
Setting the Preferred Channel and Volume Level ............................80
Setting the Clock
Setting the Sleep Timer
You can set your PDP to automatically turn off after a preset interval.
Press the Menu button. Move the joystick up or
down to select “Function”, then press the joystick
to enter.
Move
Select
Move the joystick left or right to select hour, then
move the joystick up or down to select the correct
hour.
Move the joystick left or right to select minute, then
move the joystick up or down to select the correct
minute.
Press the Menu button. Move the joystick up or
down to select “Function”, then press the joystick
to enter.
Exit
Function
English
Quick way to access the sleep timer: Just press
the “Sleep” button on the remote control.
Move the joystick up or down to select “Time”, then
press the joystick to enter.
Off
Off
Enter
10 : - - am
- - : - - am
- - : - - am
Move
Move
Off
Off
Off
10
Move the joystick left or right to select the time interval for the PDP to stay on. The interval ranges from
10 to 180 minutes.
Exit
Function
English
Off
Off
Enter
Exit
Time
Select
Off
Off
Off
10
Exit
Time
Clock
10 : 30 am
On Time
- - : - - am
Off Time
- - : - - am
Sleep
On Time Volume
On Time Channel
Move
Exit
Press the Menu button to exit.
Select
Language
Time
Caption
NR
Auto Power Off
V-Chip
Move
Off
Off
Clock
10 : 30 am
On Time
- - : - - am
Off Time
- - : - - am
Sleep
On Time Volume
On Time Channel
Exit
10 : 30 am
- - : - - am
- - : - - am
Move
English
Move the joystick up or down to select “Sleep”.
Off
Off
Off
10
Time
Clock
On Time
Off Time
Sleep
On Time Volume
On time Channel
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Move
Exit
Time
Clock
On Time
Off Time
Sleep
On Time Volume
On time Channel
Adjust
Off
Off
Language
Time
Caption
NR
Auto Power Off
V-Chip
Adjust
English
Move the joystick up or down to select “Time”, then
press the joystick to enter.
Move
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Select
Off
Off
30
10
Exit
Press the Menu button to exit.
Note
• Time setting will be reset when you pull out the Power cord if the PDP is ON.
(If you want to keep the time setting, turn the PDP off using the Power button on the remote control
or the Front Panel.)
76
77
Setting the Timers
This PDP can be set to turn on or off automatically at specific times that you choose. Before
using the timers, you must set the PDP’s clock, as described previously.
Setting the On/Off Timer
Press the Menu button. Move the joystick up or
down to select “Function”, then press the joystick
to enter.
Language
Time
Caption
NR
Auto Power Off
V-Chip
Move
Move the joystick up or down to select “Time”, then
press the joystick to enter.
Move the joystick left or right to select minute, then
move the joystick up or down to select the correct
minute.
If you want to set Off Time, move the joystick down
to select the “Off Time”.
Set the “Off Time” just as you set “On Time”.
10 : 30 am
- - : - - am
- - : - - am
Select
Off
Off
Off
10
10 : 30 am
7 : 30 am
- - : - - am
Move
On
Off
Off
10
Exit
Time
Clock
12 : 00 am
On Time
7 : 30 am
Off Time
- - : - - am
Sleep
On Time Volume
On Time Channel
Move
Exit
Time
Select
On
Off
Off
10
Exit
Press the Menu button to exit.
Note
• If you set to On Time or Off Time, the Power Indicator on the Front Panel is changed to Green.
Exit
Time
Clock
On Time
Off Time
Sleep
On Time Volume
On time Channel
10 : 30 am
7 : - - am
- - : - - am
Move
Off
Off
Off
10
Exit
Time
Clock
On Time
Off Time
Sleep
On Time Volume
On time Channel
Adjust
78
Off
Off
Enter
Time
Clock
On Time
Off Time
Sleep
On Time Volume
On time Channel
Adjust
Exit
English
Clock
On Time
Off Time
Sleep
On Time Volume
On time Channel
Adjust
Select
Move the joystick up or down to select “On Time”.
Move the joystick left or right to select hour, then
move the joystick up or down to select the correct
hour.
Move the joystick left or right to select “Off” or
“On”, then move the joystick up down to select
“Off” or “On”.
Off
Off
Language
Time
Caption
NR
Auto Power Off
V-Chip
Move
English
Function
Move
Function
10 : 30 am
7 : 30 am
- - : - - am
Move
Off
Off
Off
10
Exit
79
Setting the Preferred Channel
and Volume Level
The preferred channel and volume can be set for when the timer automatically turns on the TV.
Press the Menu button. Move the joystick up or
down to select “Function”, then press the joystick
to enter.
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Move
Move the joystick up or down to select “Time”, then
press the joystick to enter.
Select
Move the joystick up or down to select “On Time
Volume”.
Move the joystick left or right to adjust volume level.
Move the joystick up or down to select “On Time
Channel”.
Move the joystick left or right to select channel.
Exit
Function
English
Off
Off
Enter
Exit
Time
Clock
- - : - - am
On Time
- - : - - am
Off Time
- - : - - am
Sleep
On Time Volume
On Time Channel
Move
Off
Off
Language
Time
Caption
NR
Auto Power Off
V-Chip
Move
English
Select
Off
Off
Off
10
Exit
Time
Clock
- - : - - am
On Time
- - : - - am
Off Time
- - : - - am
Sleep
On Time Volume
On Time Channel
Move
Select
Exit
Off
Off
Off
10
Function Description
Selecting a Menu Language .....................................................82
Viewing Closed Captions .........................................................83
Digital Noise Reduction ...........................................................84
Setting Auto Power Off ...........................................................85
Using the V-Chip .....................................................................86
80
Selecting a Menu Language
Press the Menu button. Move the joystick up or
down to select “Function”, then press the joystick
to enter.
Your TV decodes and displays the closed captions that are broadcast with certain
TV shows. These captions are usually subtitles for the hearing impaired or foreignlanguage translations. All VCRs record the closed caption signal from television
programs, so home-recorded video tapes also provide closed captions. Most prerecorded commercial video tapes provide closed captions as well. Check for the
closed caption symbol in your television schedule and on the tape’s packaging:
Note: The Caption feature does not work with DVD or DTV signals.
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Move
Viewing Closed Captions
Off
Off
Select
Press the Menu button. Move the joystick up or
down to select “Function”, then press the joystick
to enter.
Exit
Move the joystick left or right to select the appropriate language : English, Français or Español.
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Move
Move the joystick up or down to select “Caption”,
then press the joystick to enter.
English
Off
Off
Select
Exit
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Move
English
English
Off
Off
Enter
Exit
Press the Menu button to exit.
Move the joystick left or right to turn closed captioning on/off.
Caption
Caption
Mode
Channel
Field
Move
Move the joystick up or down to select “Mode”, then
move the joystick left or right to select “Caption” or
“Text.”
Select
Exit
Caption
Caption
Mode
Channel
Field
Move
On
Caption
On
Text
Select
Exit
Depending on the particular broadcast, it might be
necessary to make changes to “Channels” and
“Field”: Move the joystick up, down, left and right
to make the changes. (Follow the same procedure
as in steps 3~4 above.)
Press the Menu button to exit.
Note
• Different channels and fields display different information: Field 2 carries additional information
that supplements the information in Field 1. (For example, Channel 1 may have subtitles in English,
while Channel 2 has subtitles in Spanish.
82
83
1
Digital Noise Reduction
Setting Auto Power Off
If the broadcast signal received by your TV is weak, you can activate the Digital Noise
Reduction feature to help reduce any static and ghosting that may appear on the screen.
The PDP can be set to turn off automatically if no buttons are pressed for 3 hours
after the PDP turns on automatically by the on timer.
Press the Menu button. Move the joystick up or
down to select “Function”, then press the joystick
to enter.
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Move
Move the joystick up or down to select “NR”.
Press the Menu button to exit.
Press the Menu button. Move the joystick up or
down to select “Function”, then press the joystick
to enter.
Exit
English
Select
Move the joystick up or down to select “Auto Power
Off”.
Exit
Function
English
Off
Off
Select
Exit
Function
Move the joystick left or right to select “On”.
English
Off
Off
Select
Exit
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Exit
Move
English
Language
Time
Caption
NR
Auto Power Off
V-Chip
Move
On
Off
Select
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Move
Off
Off
Language
Time
Caption
NR
Auto Power Off
V-Chip
Move
Select
Function
Move the joystick left or right to select “On”.
Off
Off
Language
Time
Caption
NR
Auto Power Off
V-Chip
Move
English
English
Off
On
Select
Exit
Press the Menu button to exit.
Note
• If the Off timer is set, Auto Power Off will not function.
• The power will be turned off automatically after 15 minutes if the PDP is ON and there is no input
signal. (For instance, if you select a channel without a signal while in TV mode or when there is no
input signal after selecting an output signal)
84
85
Using the V-Chip
The V-Chip feature automatically locks out programs that are deemed inappropriate
for children. The user must enter a PIN (personal ID number) before any of the V-Chip
restrictions are set up or changed.
Note : When the V-chip feature is activated, the PIP and channel-auto program features
do not function.
Setting Up Your Personal ID Number (PIN)
Press the Menu button. Move the joystick up or
down to select “Function”, then press the joystick
to enter.
Language
Time
Caption
NR
Auto Power Off
V-Chip
The message "Enter Pin" will appear. Enter your
4-digit PIN number.
Off
Off
Language
Time
Caption
NR
Auto Power Off
V-Chip
Exit
Move the joystick up or down to select “V-Chip”,
then press the joystick to enter.
English
Off
On
Enter
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Move
Function
The message "Enter Pin" will appear. Enter your
4-digit PIN number.
English
Off
On
Enter
Exit
V-Chip
Enter Pin
V-Chip
Enter Pin
Enter Pin
: ----
V-Chip
V-Chip Lock
TV GuideLines
MPAA Rating
Change Pin
Move
Exit
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
No
The “V-chip” screen will appear.
To enable the V-Chip feature, move the joystick to
the right so that the “V-Chip Lock” field is Yes.
(Move the joystick to the left or right will alternate
between Yes and No.)
: ----
V-Chip
V-Chip Lock
TV GuideLines
MPAA Rating
Change Pin
Move
The Change pin screen will appear. Choose any
4-digits for your PIN and enter them.
As soon as the 4 digits are entered, the “Confirm
New Pin” screen appears. Re-enter the same 4
digits. When the Confirm screen disappears, your
PIN has been memorized.
Off
Off
Select
Move
Exit
English
Enter Pin
Note: The default PIN number of a new TV set is
“0-0-0-0.”
The “V-chip” screen will appear. Move the joystick
up or down to select “Change Pin,” then press the
joystick to enter.
English
Select
Move
Press the Menu button. Move the joystick up or
down to select “Function”, then press the joystick
to enter.
Function
Move
Move the joystick up or down to select “V-Chip”,
then press the joystick to enter.
How to Enable/Disable the V-Chip
Enter
Yes
Select
Exit
Exit
V-Chip
Press the Menu button to exit.
Change Pin
Enter New Pin : - - - -
V-Chip
Confirm New Pin
Press the Menu button to exit.
Confirm New Pin :
Note
86
• If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin
to 0-0-0-0 : Power Off ➔ Mute ➔ 8 ➔ 2 ➔ 4 ➔ Power On.
87
How to Set up Restrictions Using the “TV guidelines”
First, set up a personal identification number (PIN), and enable the V-Chip. (See previous section.)
Parental restrictions can be set up using either of two methods: The TV guidelines or the MPAA rating.
Press the Menu button. Move the joystick up or
down to select “Function”, then press the joystick
to enter.
Move the joystick up or down to select “V-Chip”,
then press the joystick to enter.
The message "Enter Pin" will appear. Enter your
4-digit PIN number.
Off
Off
The “V-chip” screen will appear.
Move the joystick up or down to select “TV Guidelines”, press the joystick to enter.
Off
On
Enter
The “TV guidelines” screen will appear. Move the
joystick up or down to select one of the six agebased categories:
TV-Y
TV-Y7
Young children
Children 7 and over
TV-G
TV-PG
TV-14
TV-MA
General audience
Parental guidance
Viewers 14 and over
Mature audience
Note 2: The V-Chip will automatically block certain categories that are “more restrictive”.
For example, if you block “TV-Y” category, then TV-Y7 will automatically be blocked.
Similarly, if you block the TV-G category, then all the categories in the “young adult” group
will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work together
similarly. (See next section.)
Exit
V-Chip
Enter Pin
: ----
How to set the FV, D, L, S and V sub-ratings.
First, select one of these TV-Ratings: TV-Y7, TV-PG, TV-14 or TV-MA (See Step 4, on
previous page).
Next, while the TV-Rating is selected, repeatedly move the joystick to the right.
This will cycle through the available sub-ratings (FV,L, S, D or V).
A blinking letter (“U” or “B”) will be displayed for each sub-rating. While the “U” or “B” is
blinking, move the joystick up or down to change the sub-rating.
Move the joystick to the right to save the TV guidelines. A TV-Rating will be selected and no
letters will select. To select a different TV-Rating, move the joystick up or down and then
repeat the process.
Note: The V-chip will automatically block certain categories that are “More restrictive”.
For example, if you block “L” sub-rating in TV-PG, then the “L” sub-ratings in TV-14 and
TV-MA will automatically be blocked.
Press the Menu button to clear all the screens. (Or proceed to the next section, and set up
additional restrictions based on the MPAA codes).
V-Chip
V-Chip Lock
TV GuideLines
MPAA Rating
Change Pin
Move
FV: Fantasy violence
D: Dialog
L: L
S: Sexual situation
V: Violence
English
Enter Pin
Note 1: The TV-Y7, TV-PG, TV-14 and TV-MA have additional options. See the next step to
change any of the following sub-ratings:
Exit
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Move
English
Select
No
Enter
Exit
TV GuideLines
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Move
All
FV
At this point, one of the TV-Ratings is selected.
Move the joystick to the right: Depending on your existing setup, a letter “U” or “B” will start
blinking.
(U= Unblocked, B= Blocked)
While the “U” or ”B” is blinking, move the joystick up or down to block or unblock the
category.
Move the joystick to the right to save the TV guidelines. A TV-Rating will be selected,
and no letters will blink.
To select a different TV-Rating, move the joystick up or down and then repeat the process.
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Move
V S L D
B : Blocked
U : Unblocked
Select
Exit
Note
• Note: These categories consist of two separate groups: TV-Y and TV-Y7 (young children
through age 7), and TV-G through TV-MA (everybody else). The TV-Y and TV-Y7 categories
are colored blue.
The restrictions for these two groups work independently: If a household includes very young
children as well as young adults, the TV guidelines must be set up separately for each age
group. (See next step.)
88
89
How to Set up Restrictions using the MPAA Ratings: G, PG, PG-13, R, NC-17, X
How to Reset the TV after the V-Chip Blocks a Channel (“Emergency Escape”)
The MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main application is
for movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings).
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank
and the following message will appear: “Excessive rating.”
Press the Menu button. Move the joystick up or
down to select “Function”, then press the joystick
to enter.
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Move
Move the joystick up or down to select “V-Chip”,
then press the joystick to enter.
The message "Enter Pin" will appear. Enter your
4-digit PIN number.
English
Off
Off
Select
The “V-chip” screen will appear. Move the joystick down
to select “MPAA Rating,” press the joystick to enter.
Off
On
Enter
The “MPAA rating” screen will appear. MPAA category.
Moving the joystick up or down will cycle through the
MPAA categories:
General audience (no restrictions).
PG
Parental guidance suggested.
PG-13 PG-13 (Parents strongly cautioned).
Move the joystick up or down to select “V-Chip”, then press the joystick to enter.
Enter your PIN number, and move the joystick to the right to temporarily disable
the V-Chip Lock.
Exit
V-Chip
Enter Pin
: ----
V-Chip
V-Chip Lock
TV GuideLines
MPAA Rating
Change Pin
Move
Press the Menu button.
English
Enter Pin
Exit
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Move
To resume normal viewing, tune to a different channel using the number buttons.
Under certain conditions (depending on the rating of the local TV programs) the V-Chip might
lock out all the channels. In this case, use the V.Chip function for an “emergency escape”:
No
Enter
Exit
MPAA Rating
PG
PG-13
NC-17
NR
Move
B : Blocked
U : Unblocked
Enter
Exit
R (Restricted. Children under 17 should be accompanied by an adult).
NC-17 No children under age 17.
90
X (Adults only).
NR
Not rated.
While a particular category is selected, move the joystick to the right to activate it.
A selected letter (“U” or “B”) will be displayed. Move the joystick up or down to select “U” or”B”.
Move the joystick to the right to save the settings.
Note: The V-Chip will automatically block any category that is “more restrictive.” For example,
if you block the “PG-13” category, then “R,” “NC-17,” and “X” will automatically be blocked also.
91
P
Appendix
Troubleshooting............................................................................94
Care and Maintenance ................................................................95
Specifications ..............................................................................96
Care and Maintenance
Troubleshooting
Before you call a service technician, please scan this list of problems and possible solutions. It may save you
time and money.
With proper care, your PDP will give you many years of service. Please follow these guidelines to get
the maximum performance from your PDP.
Identifying Problems
Problem
Possible Solution
Poor picture.
Check all wire connections.
Your Remote control does not
operate the PDP.
Press the “Mode” button to put your remote control in the “TV”
mode.
The PDP won’t turn on.
Check if the power plug is connected.
There is no screen image.
Check to see that both the PDP and the source are plugged in
and turned on.
•
•
•
•
Do not put the PDP near extremely hot, cold, humid or dusty places.
Do not put the PDP near appliances that create magnetic fields.
Keep the ventilation openings clear.
Do not place the PDP on a rough and slanted surface, such as cloth or paper.
Liquids
• Do not place liquids near or on the PDP.
Cabinet
94
The image is too light or
too dark.
Adjust the Brightness or Contrast settings.
The image is too large or
too small.
Adjust the Size settings.
• Never open the cabinet or touch the parts inside.
• Wipe your PDP with a clean, dry cloth. Never use water, cleaning fluids, wax, or chemicals.
• Do not put heavy objects on top of the cabinet.
Temperature
• If your PDP is suddenly moved from a cold to a warm place, unplug the power cord for at least two
hours so that moisture that may have formed inside the unit can dry completely.
95
Specifications
Memo
Exterior design and product specifications are subject to change without prior notice to improve
the performance of this product.
This PDP applies to Class B digital device.
(Note: Class B system is for home use.)
This PDP has been registered for residential use in terms of EMI. So it can be used in all areas as
well as residential areas.
HPN5039 (TYPE NO: AX50P3)
Model
Dimensions
Weight
Display
1204.6(W) X 79(D) X 724(H) mm; 47.43(W) X 3.11(D) X 28.5(H) inches
Remote Control
54 (W) X 31.5 (D) X 220 (H) mm ; 2.13 (W) X 1.24 (D) X 8.66 (H) inches
Display
Remote Control
Voltage
Power Consumption
Number of Pixels
Screen Size
ANTENNA input
VIDEO input
43 kg ; 94.79 lbs {48 kg ; 105.82 lbs (with stand)}
150g (including batteries) ; 0.33lbs
120V~, 60Hz
400 Watts
1366(H) X 768(V)
127 cm/50 inches
VHF, UHF (75Ω unbalanced)
VIDEO
S-VIDEO
COMPONENT 1 - 480i / 480p / 720p / 1080i
COMPONENT 2 - 480i / 480p / 720p / 1080i
RGB : D-SUB 15P
DVI
AUDIO input
VIDEO / S-VIDEO
COMPONENT 1
COMPONENT 2
PC (RGB)
DVI
AUDIO output
10W + 10W (8 Ω)
Subwoofer (500mv RMS at 1KHz)
96
97
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Modify Date : 2003:02:28 19:09:35-05:00 Create Date : 2003:02:26 19:22:21+09:00 Page Count : 30 Mod Date : 2003:02:28 19:09:35-05:00 Creation Date : 2003:02:26 19:22:21+09:00 Producer : Acrobat Distiller 4.0 for Macintosh Metadata Date : 2003:02:28 19:09:35-05:00EXIF Metadata provided by EXIF.tools