Samsung Electronics Co HTWDC10 WLAN Transmitter Module User Manual

Samsung Electronics Co Ltd WLAN Transmitter Module HT WDC10 USA ENG indd

a href="https://usermanual.wiki/Samsung-Electronics-Co" itemprop="url"> Samsung Electronics Co >

Users Manual

Wireless Dock Cradle for iPod/iPhoneModel : HT-WDC10Thank you for purchasing this product (HT-WDC10).First, please update the main unit(HW-C450/C451) with connecting supplied USB to USB PORT back the main unit. When the main unit power is on. The power of the main unit is turned off automatically after the messages are displayed as a following order. "UPDATE" ➝ "M 0% ~ 100%" ➝ "W 0% ~ 100%" ➝ "OK".Turn on the main unit and connect the iPod/iPhone to the Wireless transmitter. Then Press O/A INPUT button on the remote control to select "iPod" mode.The INPUT mode of the main unit will switches as follows. repeatedly press DIGI.1 ➝ DIGI.2 ➝ ANALOG ➝ iPod✴ If the iPod/iPhone does not automatically make wireless connection to the Hone Theater, ID setting must be made manually.1. Turn off your Home Theater(HW-C450).2. Press the hold "AV SYNC" button on the remote control for 5 seconds. The standby light on the HW-C450 will blink once.3. Connect the iPod/iPhone to the Wireless transmitter.4. Turn on the iPod/iPhone. Press the "ID SET" button on the back of the Wireless transmitter for 5 seconds. The link light on the wireless transmitter will blink fast.5. Turn on your Home Theater(make sure the wireless transmitter's Link LED in ON). To listen to music from your iPod/iPhone over the Home Theater, select the iPod mode as the Home Theater's source.✴ When iPod is connected to WDC10, both the Home Theater and the iPod Volume are operated together. DisplayFunctionLINK (Blue LED) STANDBY (Red LED)LED ON Pairing successfully completed STANDBYLED BLINK (Long blink) Processing iPod/iPhone LOW BATTERYLED BLINK (Short blink) Processing pairing Pairing failedOPERATION STATUS OF THE WIRELESS TRANSMITTER'S LED If you use the main unit nearby a wireless device such as a laptop computer, an AP, or Wifi , any unstable operation error can happen.▪STANDBYLINKCHARGE
DisplayFunctionGREEN LED ON Power on /Charging completedRED LED ON Charging.OPERATION STATUS OF THE CHARGING CRADLE'S LEDHow to charge the Wireless Transmitter1. Connect the Wireless Transmitter to the Charging Cradle. 2. Connect the DC power adaptor to a wall socket.The charging indicator lights up and charging starts. After the battery is fully charged, the charging indicator turns Green.•STANDBYLINKCHARGE󱐻󱐽Wireless Dock Cradle for iPod/iPhone✴ The Wireless Transmitter can be onlycharghed by the supplied adaptor. ✴ The indication is the charging state of the built-in battery in iPod main Dock.Check the charging state of iPod/iPhone by checking the charging indication of its battery. “Made for iPod” means that an electronic accessory has been designed to connect specifi cally to iPod and has been certifi ed by the developer to meet Apple performance standards.“Made for iPhone” means that an electronic accessory has been designed to connect specifi cally to iPhone and has been certifi ed by the developer to meet Apple performance standards.Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.▪▪▪iPod/iPhone MODELS THAT CAN BE USED WITH THIS PRODUCTiPod nano 3rd generation (video)iPod 5th generation (video)iPod nano 4th generation (video)iPod touch 1st generationiPod touch 2nd generationiPhone 3GiPod classic iPhone
Download:
Mirror Download [FCC.gov]
Document ID1289826
Application IDibMOZlaC9b7c8G7zZDS8yg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize87.47kB (1093327 bits)
Date Submitted2010-06-02 00:00:00
Date Available2010-06-03 00:00:00
Creation Date2010-04-30 10:41:37
Producing SoftwareAdobe PDF Library 7.0
Document Lastmod2010-06-02 16:58:35
Document TitleHT-WDC10-USA-ENG.indd
Document CreatorAdobe InDesign CS2 (4.0)
FCC ID Filing: A3LHTWDC10

Navigation menu