Samsung Electronics Co HTX810 DVD Receiver (BT) User Manual HT X810 2
Samsung Electronics Co Ltd DVD Receiver (BT) HT X810 2
Contents
- 1. User manual 1 of 3
- 2. User manual 2 of 3
- 3. User manual 3 of 3
User manual 2 of 3
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 921325 |
| Application ID | quxDpuxGgzASr8Ydbzp6iw== |
| Document Description | User manual 2 of 3 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 167.2kB (2090026 bits) |
| Date Submitted | 2008-03-30 00:00:00 |
| Date Available | 2008-03-30 00:00:00 |
| Creation Date | 2008-03-22 09:53:15 |
| Producing Software | Acrobat Distiller 5.0.5 (Windows) |
| Document Lastmod | 2008-03-22 09:53:15 |
| Document Title | HT-X810_User Manual-2.pdf |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | ltsai |
ENG CONNECTING THE VIDEO OUT TO YOUR TV Choose one of the three methods for connecting to a TV. HDMI OUT â CONNECTIONS HDMI OUT METHOD1 METHOD2 METHOD3 (supplied) METHOD 1 : HDMI (BEST QUALITY) Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Player to the HDMI IN jack on your TV. METHOD 2 : Component Video (BETTER QUALITY) If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the Component Video Output (Pr, Pb and Y) jacks on the back of the DVD Player to the Component Video Input jacks on your TV. METHOD 3 : Composite Video (GOOD QUALITY) Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the VIDEO IN jack on your TV. ď This product operates in Interlace scan mode (480i) for Component output. ď If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate the Home Theater using the TV's remote control. This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC). ď Please check the logo (If your TV has an logo, then it supports the Anynet+ function.) 19 *6:A:##AKPFF connections CONNECTING THE VIDEO OUT TO YOUR TV (CON'T) HDMI Auto Detection Function The player's video output will automatically change to HDMI mode when connecting an HDMI cable while power is on. ⢠HDMI (High Definition Multimedia Interface) HDMI is an interface that enables the digital transmission of video and audio data with just a single connector. Using HDMI, the DVD Home Theater transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack. ⢠HDMI connection description HDMI connector - Supports video and digital audio data. - HDMI outputs only a pure digital signal to the TV. - If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen. ⢠Why does Samsung use HDMI? Analog TVs require an analog video/audio signal. However, when playing a DVD, the data transmitted to a TV is digital. Therefore either a digital-to-analog converter (in the DVD Home Theater) or an analog-to-digital converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss. HDMI technology is superior because it requires no D/A conversion and is a pure digital signal from the player to your TV. ⢠What is the HDCP? HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made. ⢠What is Anynet+? Anynet+ is a convenient function that offers linked operation of this unit through Samsung TVs with the Anynet+ feature. - If your Samsung TV has an logo, then it supports the Anynet+ function. - If you turn on the player and insert a disc, the player will start playing the disc, and the TV will turn on automatically and switch to HDMI mode. - If you turn on the player and press the Play button with a disc already inserted, the TV will immediately turn on and switch to HDMI mode. 20 HT-X810_XAA_0303.indd 20 ENG HDMI FUNCTION Resolution Selection This function allows the user to select the screen resolution for HDMI output. ď If the TV does not support the configured resolution, you will not be able to see the picture properly. ď When an HDMI cable is connected, composite and component video signals are not output. ď See your TV owner's manual for more information on how to select the TV's Video Input source. Why use HDMI (High Definition Multimedia Interface)? This device transmits a DVD video signal digitally without the process of converting to analog. You will get sharper digital pictures when using an HDMI connection. â CONNECTIONS In Stop mode, press and hold the SD/HD (Standard Definition/High Definition) button on the remote control. ⢠Resolutions available for the HDMI output are 480p, 720p, 1080i/1080p. ⢠SD(Standard Definition) resolution is 480p and HD (High Definition) resolution is 720p, 1080i/1080p. The default value of HDMI output is 480p. Using Anynet+(HDMI-CEC) Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet + can be used by connecting this Home Theater to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs that support Anynet+. 1. Connect the main unit of the Home Theater to a Samsung With Anynet+ TV with an HDMI cable. (See page 19) You can operate this unit, power 2. Set the Anynet+ function on your TV. on your TV, or watch a movie by (See the TV instruction manual for more information.) pressing the Play button on your ⢠You can operate the Home Theater by using the TV Samsung TV's remote control. remote control. (Available TV buttons : , S,T and W,X buttons, ~ button) If you select the TV Set the Anynet+(HDMI-CEC) to On by pressing the Anynet+ button on your TV remote control. ⢠Receiver : On : You can listen to audio through the Home Theater. ⢠Receiver : Off : You can listen to audio through the TV. MOVE MOVE ENTER ENTER EXIT EXIT MOVE ENTER EXIT If you select the THEATER Select THEATER to connect and set the option of each item below. ⢠View TV : If Anynet+(HDMI CEC) is set to on and you select View TV, the home theater will automatically switch to digital in mode. ⢠Theater Menu : you can access and control the Home theater menu. ⢠Theater Operation : The Home Theater disc playback information will be displayed. You can control the Disc operation of the Home Theater such as title, chapter and subtitle change. ⢠Receiver : On : You can listen to audio through the Home Theater. ⢠Receiver : Off : You can listen to audio through the TV. ď If you chose 'View TV' and you want to listen to TV sound through Digital In of the Home theater, you have to connect an optical cable between the TV and the Home Theater. 21 HT-X810_XAA_0303.indd 21 connections CONNECTING AUDIO FROM EXTERNAL COMPONENTS AUX1 : Connecting an External Component/MP3 player Components such as an MP3 Player Audio Cable (not supplied) Audio OUT 1. Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external component/MP3 player. 2. Press the AUX button on the remote control to select AUX1 input. ⢠You can also use the FUNCTION button on the main unit. The mode switches as follows : DVD/CD D.IN AUX 1 AUX 2 USB BT AUDIO FM. 22 HT-X810_XAA_0303.indd 22 ENG AUX2 : Rear Panel OPTICAL : Rear Panel â CONNECTIONS HDMI OUT HDMI OUT Audio Cable (not supplied) If the external analog component has only one Audio Out, connect either left or right. External Analog Component Optical Cable (not supplied) External Digital Component AUX2 : Connecting an External Analog Component Analog signal components such as a VCR. 1. Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component. ⢠Be sure to match connector colors. 2. Press the AUX button on the remote control to select AUX 2 input. ⢠You can also use the FUNCTION button on the main unit. The mode switches as follows : DVD/CD D.IN AUX 1 AUX 2 USB BT AUDIO FM. ď You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this product. OPTICAL : Connecting an External Digital Component Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box). 1. Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital component. 2. Press the AUX button on the remote control to select DIGITAL IN. ⢠You can also use the FUNCTION button on the main unit. The mode switches as follows : DVD/CD D.IN AUX 1 AUX 2 USB BT AUDIO FM. 23 HT-X810_XAA_0303.indd 23 connections CONNECTING THE FM ANTENNA 1. Connect the FM antenna supplied to the FM 75Ί COAXIAL Jack. 2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. HDMI OUT FM Antenna (supplied) ď This unit does not receive AM broadcasts. 24 HT-X810_XAA_0303.indd 24 ENG before using your home theater The DVD Home Theater's remote can be used to control Samsung TVs. 1. Plug the main unit's power cord into the AC power supply. â BEFORE USING YOUR HOME THEATER 2. Press the DVD RECEIVER button to switch to DVD RECEIVER mode to operate the DVD Home Theater. 3. Press the FUNCTION button on the main unit or DVD button on the remote to enable DVD/CD playback. 4. Press the TV button to set the remote to TV mode. 5. Press the POWER button to turn on your Samsung TV with this remote. 6. Press the TV/VIDEO button to select VIDEO mode on your TV. VIDEO 25 *6:A:##AKPFF playback DISC PLAYBACK 1. Load a disc vertically into the Disc Insert Hole. ⢠Place a disc gently into the tray with the discâs label facing up. 2. Close the compartment by pressing the PLAY ( ⢠Playback starts automatically. ) button. To stop playback, press the STOP ( ) button during playback. ⢠If pressed once, PRESS PLAY is displayed and the stop position will be stored in memory. If the PLAY ( ) button or ENTER button is pressed, playback resumes from the stop position. (This function works only with DVDs.) ⢠If pressed twice, STOP is displayed, and if the PLAY ( ) button is pressed, playback starts from the beginning. To temporarily pause playback, press the PAUSE ( ) button during playback. ⢠To resume playback, press the PLAY ( ) button. ď Depending on the content of the disc, the initial screen may appear different. ď Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection system) recommendations. 26 *6:A:##AKPFF ENG MP3/WMA-CD PLAYBACK Data CDs (CD-R, CD-RW) encoded in MP3/WMA format can be played. â PLAYBACK 1. Load an MP3/WMA disc. ⢠The MP3/WMA menu screen will appear and playback will start. ⢠The appearance of the menu depends on the MP3/WMA disc. ⢠WMA-DRM files cannot be played. 2. In Stop mode, use the Cursor S,T,W,X button to select the album, and then press the ENTER button. ⢠Use the Cursor S,T button to select the track. 3. To change the album, use the Cursor S,T,W,X button to select another album in Stop mode, and then press the ENTER button. 4. Press the STOP (ďŽ) button to stop playback. ď Depending on the recording mode, some MP3/WMA-CDs may not play. ď Table of contents of a MP3-CD varies depending on the MP3/WMA track format recorded on the disc. To play a file icon in the screen, ⢠Press the Cursor S,T,W,X button when it is in Stop mode and select a desired icon from the top part of the menu. Music File Icon : To play music files only, select the Icon. Image File Icon : To view image files only, select the Icon. Movie File Icon : To view movie files only, select the Icon. All File Icon : To view all files, select the Icon. 27 *6:A:##AKPFF playback JPEG FILE PLAYBACK Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back with this Home Theater. Rotate/Flip Function Press the Cursor S,T,W,X button during playback. button: Flip Vertically button: Rotate 90° Counterclockwise button: Rotate 90° Clockwise Original Image button: Flip Horizontally ď The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for standard JPEG files and 2048 x 1536 (or 3.0 MPixel) for progressive image files. ď If a JPEG file is played when the HDMI output resolution is 720p/1080i/1080p, the mode is automatically converted to 480p mode. 28 HT-X810_XAA_0303.indd 28 The functions on this page apply to DivX disc playback. Skip Forward/Back Fast Playback â PLAYBACK During playback, press the #,$ button. ⢠Goes to the next file whenever you press the $ button, if there are over 2 files in the disc. ⢠Goes to the previous file whenever you press the # button, if there are over 2 files in the disc. During playback, press the ďś,ďˇ button. To play back the disc at a faster speed, press the ďś or ďˇ button during playback. ⢠Each time you press either button, the playback speed will change as follows: 2x 4x 8x 32x Normal. 5 Minutes Skip function ENG DIVX PLAYBACK During playback, press the Cursor W,X button. ⢠Playback skips 5 minutes forward whenever you press the Cursor X button. ⢠Playback skips 5 minutes back whenever you press the Cursor W button. Audio Display Press the AUDIO button. ⢠If there are multiple audio tracks on a disc, you can toggle between them. ⢠Each time you press the button, your selection will toggle between AUDIO (1/N, 2/N ...) and . Mď is displayed when there is only one supported language in the disc. Subtitle Display Press the SUBTITLE button. ⢠Each time you press the button, your selection will toggle between SUBTITLE (1/N, 2/N ...) and SUBTITLE OFF. ⢠If the disc has only one subtitle file, it will be played automatically. ⢠See number 2 (Caption Function) below for more details concerning Subtitle usage with DivX discs. 29 *6:A:##AKPFF playback DIVX PLAYBACK (CON'T) If the Disc has more than One Subtitle File If the disc has more than one subtitle file, the default subtitle may not match the movie and you will have to select your subtitle language as follows: 1. In Stop mode, press the Cursor S,T button, select the desired subtitle ( ) from the TV screen, and then press the ENTER button. 2. When you select the desired DivX file from the TV screen, the movie will be played normally. DivX(Digital internet video eXpress) DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology to provide audio and video data over the Internet in real-time. MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie at near DVD-quality video and audio. 1. Supported Formats This product only supports the following media formats.If both video and audio formats are not supported, the user may experience problems such as broken images or no sound. Supported Video Formats Format AVI WMV Supported Versions DivX3.11~DivX5.1, XviD V1/V2/V3/V7 Supported Audio Formats Format MP3 Bit Rate 80~384kbps Sampling Frequency WMA AC3 56~128kbps 128~384kbps 44.1khz 44.1/48khz ⢠Aspect Ratio : Although the default DivX resolution is 640x480 pixels (4:3), this product supports up to 800x600 pixels (16:9). TV screen resolutions higher than 800 will not be supported. ⢠When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may experience shaking on the screen during playback. 2. Caption Function ⢠You must have some experience with video extraction and editing in order to use this feature properly. ⢠To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX media file (*.avi) within the same folder. Example. Root Samsung_007CD1.avi Samsung_007CD1.smi ⢠Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the file name. 30 HT-X810_XAA_0303.indd 30 Displaying Disc Information BAGD ENG USING THE PLAYBACK FUNCTION You can view disc playback information on the TV screen. Press the INFO button. â PLAYBACK ď Depending on the disc, the disc information display may appear different. ď Depending on the disc, you can also select DOLBY DIGITAL, or PRO LOGIC. appears on the TV screen! If this symbol appears on the TV screen when pressing a button, that operation is not possible with the disc currently being played. Checking the Remaining Time BA Press the REMAIN button. ⢠For checking the total and remaining time of a title or chapter being played. Each time the Remain button is pressed DVD-VIDEO DVD-AUDIO TITLE ELAPSED â TITLE REMAIN â CHAPTER ELAPSED â CHAPTER REMAIN GROUP ELAPSED â GROUP REMAIN â TRACK ELAPSED â TRACK REMAIN B TRACK ELAPSED â TRACK REMAIN â TOTAL ELAPSED â TOTAL REMAIN A TRACK REMAIN â TRACK ELAPSED 31 HT-X810_XAA_0303.indd 31 playback USING THE PLAYBACK FUNCTION (CON'T) Fast Playback BAD Press the ďś, ďˇ button. ⢠Each time the button is pressed during playback, the playback speed changes as follows: ďś 2X ďś 4X ďś 8X ďś 32X X PLAY ďˇ 2X ďˇ 4X ďˇ 8X ďˇ 32X X PLAY ď During fast playback of a CD or MP3-CD, sound is heard only at 2x speed, and not at 4x, 8x, and 32x speeds. Slow Playback Press the SLOW button. ⢠Each time the button is pressed during playback, the playback speed changes as follows: âďł1/4 âďł1/8 âď˛1/2 âď˛1/4 âď˛1/8 â d Xďł1/2 PLAY D ďł1/2 âďł1/4 âďł1/8 â X PLAY ď No sound is heard during slow playback. ď Reverse slow playback does not work with DivX. Skipping Scenes/Songs Press the #,$ button. ⢠Each time the button is pressed during playback, the previous or next chapter, track or directory (file) will be played. ⢠You cannot skip chapters consecutively. 32 HT-X810_XAA_0303.indd 32 BAGD Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file). ENG Repeat Playback Press the REPEAT button. ⢠Each time the button is pressed during playback, the repeat playback mode changes as follows: REPEAT : CHAPTER REPEAT : TITLE REPEAT : OFF DVD-AUDIO REPEAT : TRACK REPEAT : GROUP REPEAT : OFF AGD â PLAYBACK DVD-VIDEO REPEAT : TRACK REPEAT : DISC REPEAT : OFF REPEAT : OFFREPEAT : RANDOM REPEAT : TRACK REPEAT : DIR REPEAT : DISC REPEAT : OFF Repeat Playback Options CHAPTER : Repeatedly plays the selected chapter. TITLE : Repeatedly plays the selected title. GROUP : Repeatedly plays the selected group. RANDOM : Plays tracks in random order. (A track that has already been played may be played again.) TRACK : Repeatedly plays the selected track. DIR : Repeatedly plays all tracks in the selected folder. DISC : Repeatedly plays the entire disc. OFF : Cancels Repeat Playback. To Select a Repeat Playback Mode in the Disc Information Screen 1. Press the INFO button twice. 2. Press the Cursor X button to move to REPEAT PLAYBACK ( ) display. 3. Press the Cursor T button to select the desired Repeat Playback mode. ⢠To select another album and track, repeat Steps 2 and 3 above. 4. Press the ENTER button. OFF A- CHAP TITLE OFF B OFF A- TRACK DISC OFF ď For DivX, MP3 and JPEG discs, you cannot select Repeat Play from the information display screen. 33 HT-X810_XAA_0303.indd 33 playback USING THE PLAYBACK FUNCTION (CON'T) A-B Repeat Playback You can repeatedly play back a designated section of a DVD. 1. Press the INFO button twice. 2. Press the Cursor X button to move to REPEAT PLAYBACK ( ) display. 3. Press the Cursor S,T button to select A- and then press the ENTER button. ⢠When the ENTER button is pressed, the selected position will be stored in memory. 4. Press the ENTER button at the end of the desired segment. ⢠The specified segment will be played repeatedly. A-B To return to normal playback, press the Cursor S,T button to select OFF. ď The A-B Repeat function does not operate with DivX, MP3 or JPEG discs. Step Function Press the STEP button. ⢠The picture moves forward one frame each time the button is pressed during playback. ď No sound is heard during step motion playback. 34 HT-X810_XAA_0303.indd 34 ENG Angle Function This function allows you to view the same scene in different angles. 1. Press the INFO button. 2. Press the Cursor X button to move to ANGLE ( display. 1/3  2/3  3/3  â PLAYBACK 3. Press the Cursor S,T button or numeric buttons to select the desired angle. ⢠Each time the button is pressed, the angle changes as follows: 1/3 ď The Angle function works only with discs on which multiple angles have been recorded. Zoom (Screen Enlarge) Function This function allows you to enlarge a particular area of the displayed image. 1. Press the ZOOM button. 2. Press the Cursor â˛, âź, â, âşbutton to move to ANGLE ( ) display. 3. Press the ENTER button. ⢠Each time the button is pressed, the zoom level changes as follows: ZOOM X 1.5 ZOOM X 2 ZOOM X 3 SELECT ZOOM POSITION ZOOM OFF 35 *6:A:##AKPFF playback USING THE PLAYBACK FUNCTION (CON'T) Bonus Group Some DVD-Audio discs have an extra âbonusâ group that requires a 4-digit key number to access. See the disc packaging for details and the key number. DVD-AUDIO BONUS GROUP KEY NUMBER : When you play a DVD-Audio disc that has a bonus group, the key number input screen appears automatically. ď If you eject the disc, switch the power off, or unplug the player, you will need to re-enter the key number. Navigating Pages DVD-AUDIO During playback, press the .,, button on the remote control. ⢠You can select the desired image from a DVD-Audio disc containing still images. ⢠With some discs, you may not be able to select images. Audio Language Selection Function 1. Press the INFO button twice. 2. Press the Cursor S,T button or numeric buttons to select the desired audio language. ⢠Depending on the number of languages on a DVD disc, a different audio language (ENGLISH, SPANISH, FRENCH, etc.) is selected each time the button is pressed. EN 1/3 SP 2/3 FR 3/3 EN 1/3 ď To operate this function, you can also press the AUDIO buttons on the remote control. ď Depending on the disc, the Audio Language functions may not be available. 36 *6:A:##AKPFF ENG Subtitle Language Selection Function 1. Press the INFO button twice. 2. Press the Cursor X button to move to SUBTITLE ( display. 3. Press the Cursor T button or numeric buttons to select the desired subtitle. â PLAYBACK EN 01/03 SP 02/03 FR 03/03 OFF/03 EN 01/03 ď To operate this function, you can also press the SUBTITLE buttons on the remote control. ď Depending on the disc, the Subtitle Language functions may not be available. BAG Moving Directly to a Scene/Song 1. Press the INFO button. 2. Press the Cursor S,T button or numeric buttons to select the desired title/track ( ) and then press the ENTER button. 3. Press the Cursor W,X button to move to the Chapter ( ) display. 4. Press the Cursor S,T button or numeric buttons to select the desired chapter and then press the ENTER button. 5. Press the Cursor W,X button to move to time ( ) display. 6. Press the numeric buttons to select the desired time and then press the ENTER button. AG Press the numeric buttons. ⢠The selected file will be played. ⢠When playing an MP3 or JPEG disc, you cannot use the Cursor S,T button to move to a folder. To move a folder, press the STOP (ďŽ) and then press the Cursor S,T button. ď You can press the #,$ button on the remote control to move directly to the desired title, chapter, or track. ď Depending on the disc, you may not be able to move to the selected title or time. 37 *6:A:##AKPFF playback USING THE PLAYBACK FUNCTION (CON'T) Using the Disc Menu You can use the menus for the audio language, subtitle language, profile, etc. DVD menu contents differ from disc to disc. 1. In Stop mode, press the MENU button. 2. Press the Cursor S,T button or numeric buttons to move to Disc Menu and then press the ENTER button. ⢠When you select Disc Menu and it is not supported by the disc, the "This menu is not supported" message appears on the screen. 3. Press the Cursor S,T,W,X button to select the desired item. 4. Press the ENTER button. Press the EXIT button to exit the setup screen. MOVE ENTER EXIT ď The disc menu display may be different depending on the disc. Using the Title Menu For DVDs containing multiple titles, you can view the title of each movie. Depending on the disc, the availability of this feature may vary. 1. In Stop mode, press the MENU button. 2. Press the Cursor S,T button to move to Title Menu. 3. Press the ENTER button. ⢠The title menu appears. Press the EXIT button to exit the setup screen. MOVE ENTER EXIT ď The Title menu display may be different depending on the disc. 38 HT-X810_XAA_0303.indd 38
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2008:03:22 09:53:15-08:00 Modify Date : 2008:03:22 09:53:15-08:00 Page Count : 20 Creation Date : 2008:03:22 17:53:15Z Mod Date : 2008:03:22 17:53:15Z Producer : Acrobat Distiller 5.0.5 (Windows) Author : ltsai Metadata Date : 2008:03:22 17:53:15Z Creator : ltsai Title : HT-X810_User Manual-2.pdfEXIF Metadata provided by EXIF.tools