Samsung Electronics Co RMCBNF Bluetooth Remote Control User Manual HT F9730W ZA 0514 indd

Samsung Electronics Co Ltd Bluetooth Remote Control HT F9730W ZA 0514 indd

User manual

| 2 English Safety InformationWARNING• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the apparatus.FCC NOTES (for U.S.A)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on.If interference is present, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect this equipment to an outlet on a circuit that the receiver is not connected to.• Consult the dealer or an experienced radio/TV technician for help.This class B digital product meets all requirements of the Canadian Interference - Causing Equipment Regulations.WarningTO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENThe lighting flash and arrowhead within the triangle are warning signs alerting you to dangerous voltage inside the product.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.The exclamation point within the triangle is a warning sign alerting you to important instructions accompanying the product.CLASS 1 LASER PRODUCTThis Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.Complies with 21CFR 1040.10 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.DANGER :• VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. (FDA 21 CFR)CAUTION :• CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO THE BEAM (IEC 60825-1) • THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.CLASS 1 LASER PRODUCTKLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITEKLASS 1 LASER APPARATPRODUCTO LÁSER CLASE 1HT-F9730W_ZA_0514.indd 2HT-F9730W_ZA_0514.indd 2 2013-05-14 오후 6:20:282013-05-14 오후 6:20:28
English 13 |02 Getting StartedRemote ControlTo pair NFC (Near Field Communication) devices with your Home Theater, you must first pair the remote control with the Home Theater. See page 39. Pairing occurs automatically when you press any button on the remote after turning on the Home Theater for the first time.Tour of the Remote ControlTag the on the back of the remote control to use the NFC function. (See page 39)FUNCTIONDISC MENU TITLE MENUMUTETV SOUNDFULL SCREEN REPEATTOOLSRETURNEXITINFOMO/ST3D SOUNDSOUNDS/W LEVELMANUAL1234567809POPUPRECEIVERSLEEPBD TVTUNERMEMORYSUBTITLESMART SEARCHHOMEABCDEFFECTPRESETHUBVOLTUNING/ CHTV SOURCEAUDIOPress to apply sound effects.Turn the product on and off.To change to Home Theater mode and control the Home Theater, press the BD button.Press numeric buttons to operate options.Press to skip backwards or forwards.Adjust the volume.Cut off the sound temporarily.Press to see the full screenon a TV.Press to move to the Home screen.Select on-screen menu items and change menu values.Return to the previous menu.These buttons are used both for menus on the product and also several Blu-ray Disc functions.Press to view the disc menu.Press to use the Tools menu.Press to use Smart Hub.Selects the disc Audio language.To change to Television mode and control the TV, press the TV button.Press to stop/play a disc.Press to search contents.Press to select MANUAL/PRESET in the Tuner function.Set a Sleep time to shut off the product.Press to select the home theater's mode (HDMI, AUX, BD/DVD, etc.).or Press to select TV's video mode.Select MONO or STEREO for radio broadcasts.Press to search backwards or forwards.Press to pause a disc.Search for active FM stations and to change channels.Press to output the audio signal to the home theater speakers or the TV speaker. (See page 42)Use to enter the Popup menu/Title menu.Press to exit the menu.Use to display the playback information when playing a Blu-ray/DVD disc.Use to set a preset radio frequency.Allows you to repeat a title, chapter, track or disc.Use to adjust the level of the subwoofer.Selects the disc subtitle language.Press to apply the 3D sound effect.Press to open and close the disc tray.HT-F9730W_ZA_0514.indd 13HT-F9730W_ZA_0514.indd 13 2013-05-14 오후 6:20:412013-05-14 오후 6:20:41
| 14 English Getting StartedInstalling batteries in the Remote ControlBattery size: AAA21| NOTES | Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. Assuming typical TV usage, the batteries last for about one year. The remote control can be used up to approximately 23 feet (7 meters) from the product in a straight line.Setting up the Remote ControlYou can control certain functions of your TV with this remote control.To operate a TV with the Remote Control1. Press the TV button to set the remote control to TV mode.2. Turn on your TV.3. While holding down the POWER button, enter the code corresponding to your brand of TV.• If there is more than one code listed for your TV in the table, enter one at a time to determine which code works.• Example : For a Samsung TVWhile holding down the POWER button, use the number buttons to enter 00. If that does not work, try 15, then 16, etc.4. If the TV turns off, the setting is complete.• You can use the TV POWER, VOLUME, CHANNEL, and Numeric buttons (0~9).| NOTES | The remote may not be able to control some functions, depending on your brand of TV. Also, the remote control may not work on some brands of TVs. The remote control will work with Samsung TVs by default.TV Control CodesBrand CodeAdmiral (M.Wards) 56, 57, 58A Mark 01, 15Anam 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14AOC 01, 18, 40, 48Bell & Howell (M.Wards) 57, 58, 81Brocsonic 59, 60Candle 18Cetronic 03Citizen 03, 18, 25Cinema 97Classic 03Concerto 18Contec 46Coronado 15Craig 03, 05, 61, 82, 83, 84Croslex 62Crown 03Curtis Mates 59, 61, 63CXC 03Daewoo02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 34, 35, 36, 48, 59, 90Daytron 40Dynasty 03Emerson 03, 15, 40, 46, 59, 61, 64, 82, 83, 84, 85Fisher 19, 65Funai 03Futuretech 03General Electric (GE) 06, 40, 56, 59, 66, 67, 68Hall Mark 40Hitachi 15, 18, 50, 59, 69Inkel 45JC Penny 56, 59, 67, 86JVC 70KTV 59, 61, 87, 88KEC 03, 15, 40KMC 15LG (Goldstar) 01, 15, 16, 17, 37, 38, 39, 40, 41, 42, 43, 44Luxman 18LXI (Sears) 19, 54, 56, 59, 60, 62, 63, 65, 71Magnavox 15, 17, 18, 48, 54, 59, 60, 62, 72, 89Marantz 40, 54Matsui 54MGA 18, 40Brand CodeMitsubishi/MGA 18, 40, 59, 60, 75MTC 18NEC 18, 19, 20, 40, 59, 60Nikei 03Onking 03Onwa 03Panasonic 06, 07, 08, 09, 54, 66, 67, 73, 74Penney 18Philco 03, 15, 17, 18, 48, 54, 59, 62, 69, 90Philips 15, 17, 18, 40, 48, 54, 62, 72Pioneer 63, 66, 80, 91Portland 15, 18, 59Proton 40Quasar 06, 66, 67Radio Shack 17, 48, 56, 60, 61, 75RCA/Proscan 18, 59, 67, 76, 77, 78, 92, 93, 94Realistic 03, 19Sampo 40Samsung00, 15, 16, 17, 40, 43, 46, 47, 48, 49,59, 60, 98Sanyo 19, 61, 65Scott 03, 40, 60, 61Sears 15, 18, 19Sharp 15, 57, 64Signature 2000 (M.Wards) 57, 58Sony 50, 51, 52, 53, 55Soundesign 03, 40Spectricon 01SSS 18Sylvania 18, 40, 48, 54, 59, 60, 62Symphonic 61, 95, 96Tatung 06Techwood 18Teknika 03, 15, 18, 25TMK 18, 40Toshiba 19, 57, 63, 71Vidtech 18Videch 59, 60, 69Wards 15, 17, 18, 40, 48, 54, 60, 64Yamaha 18York 40Yupiteru 03Zenith 58, 79Zonda 01Dongyang 03, 54HT-F9730W_ZA_0514.indd 14HT-F9730W_ZA_0514.indd 14 2013-05-14 오후 6:20:442013-05-14 오후 6:20:44
English 39 |05 Media PlayTo disconnect the Home Theater from the Bluetooth devicePress the ( ) button on the front panel of the Home Theater to switch from BT to another mode or turn off the Home Theater.• Except when you disconnect the home theater by changing functions, the connected Bluetooth device will wait a certain time for a response from the Home Theater before terminating the connection. (Disconnection time may differ, depending on the Bluetooth device.)| NOTES | In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Home Theater System and the Bluetooth device exceeds 32.8 feet. When the Bluetooth device comes back into effective range or you restart the Bluetooth device, you have to pair the device and home theater again to reconnect. In Bluetooth mode, the screen saver will start if the Bluetooth device stays in the Ready state for 5 minutes. To reconnect the Bluetooth device, turn off the screen saver, and then connect the device. To turn off the screen saver, press any button on the remote control (the Volume button, a number button, etc.)Using NFC (Near Field Communication)Using NFC pairing, you can easily connect your home theater to an NFC compatible Bluetooth source device for music listening.Initial Pairing3D SOUNDSOUNDS/W LEVELMANUAL SUBTITLESMART SEARCHEFFECTPRESETHUBAUDIO3D SOUNDS/W LEVELSUBTITLESMARTSEARCHHUBAUDIOTo pair NFC devices with your Home Theater, you first must pair the remote control and the Home Theater. Pairing occurs automatically when you press any button on the remote after turning on the Home Theater for the first time.If pairing fails, follow these steps:1. To reset NFC pairing, press and hold the both PRESET and EFFECT buttons on the remote simultaneously for more than 2 seconds. The BD RECEIVER button on the remote blinks and the NFC pairing resets.2. Press any button on the remote. If pairing is successful, the “REMOTE PAIRED” message appears on the Home Theater’s display within 20 seconds.Pairing an NFC Device with the Home Theater 1. Turn on your NFC compatible Bluetooth device and make sure its screen is unlocked.• NFC pairing becomes unavailable if the device’s screen lock is enabled.2. Gently touch the on the home theater remote’s rear side with the NFC compatible Bluetooth device.| NOTES | This pairing feature works only if the home theater is turned on.3. On the NFC compatible Bluetooth device’s screen, a message to confirm pairing appears. Select "Yes".• Once pairing is complete the “Paired.” Message appears.4. To cancel NFC pairing, gently touch the on the home theater remote’s rear side with the device again.• To pair another NFC device with the home theater if it is already paired to a device:Gently touch the on the home theater remote’s rear side with the new NFC compatible device. The home theater cancels the existing connection and pairs with the new device.| NOTES | The NFC feature is available in the Android 4.1x ‘Jelly Bean’ version or later.- This feature is supported by devices with Android v4.1 ‘Jelly Bean' only. Jelly Bean 4.1.X: Switches to BT mode upon Tagging. Jelly Bean 4.2.X: Switches to BT mode and begins Music playback upon Tagging. The actual location of the NFC antenna varies from device to device. Before connecting, confirm the location of your device’s antenna. If the pairing device is covered by or inside a thick case/housing, pairing may not be easy. The is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.HT-F9730W_ZA_0514.indd 39HT-F9730W_ZA_0514.indd 39 2013-05-14 오후 6:21:302013-05-14 오후 6:21:30
Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment. - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by the manufacturer could void your authority to operate the equipment under FCC rules. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Navigation menu