Samsung Electronics Co SCH6000 SINGLE-BAND PCS CDMA PHONE User Manual USERS MANUAL

Download:
Mirror Download [FCC.gov]
Document ID	19427
Application ID	fl2nPb1eJ/MEWllmDAJJDg==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	81.09kB (1013627 bits)
Date Submitted	1999-01-13 00:00:00
Date Available	1999-03-24 00:00:00
Creation Date	1999-01-11 11:46:52
Producing Software	Acrobat 3.0 Scan Plug-in
Document Lastmod	1999-01-11 11:47:25
Document Title	USERS MANUAL
Document Creator	Acrobat 3.0 Scan Plug-in

SCH-6000 FCC DOCUMENTS w
ELECTRONICS
12. User Manual
SCH-6000 FCC DOCUMENTS w
ELECTRONICS
Getting to know your phone.
(THIS SECTION WILL INCLUDE A PHOTO OF THE PHONE. WITH CALL-OUTS,SIMILAR TO
WHAT WE DID WITH THE SONY PHONE, PLEASE CONFIRM THAT NOTHING WAS LEFT
OUT.)
Red Light: Illuminates when PWR id pressed and when out have incoming calls and messages.
Volume: Lets you adjust the sound level.
TALK: Lets you place a call and answer Call Waiting.
*. d: Allow you to scroll through the menu options and displays.
CLR: Allows you to clear your last entry.
END/Q): Lets you disconnect a call and return to standby mode.
ENVELOPE: Lets you access your voicemail and listen to your messages.
MENU: Lets you access the phone's menus.
OK: Allows you to save phone numbers,along with any settings you select in the menus.
Display icons: What they tell you.
Display icons are all the graphic symbols that show up on your display screen. In short,they
tell you what’s going on. They're shown below.
Signal: Measures your current signal strength. The more lines there are,the stronger the signal.
ENVELOPE: Indicates when you have messages waiting in voicemail.
Battery: Shows the level of your battery charge. The ntore thiek,diagonal lines you see,the more power you lefl.
When the charge is low,the icon blinks.
Lock Icon: Displayed when the phone is Iocked;you must enter your four-digit lock code to
unlock the phone.
???what other icons are there? What do they do? Verify that these are correct???
Battery Pack
Your new Sprint PCS Phone comes with a rechargeable battery pack that is partially charged so you can use it
immediately afier you activate,without any hassle. If you have the time. however,you should charge the battery as
soon as possible,to get the most out of it,
SCH-6000 FCC DOCUMENTS w
ELECTRONICS
Installing your battery pack.
To install your batteryJust follow these simple steps:
1. Hold the battery with the label facing down.
to
. Lay it on the back of the phone with the top of the battery about a quarter of an inch from
the latch.(The connectors at the base of the battery should line up with the connectors on
the base of the phone. I didn‘t know what to call those little metal things in the battery and
on the phone)
. Gently slide the battery until it clicks into place,
Turning your phone on and off.
When you're ready to turn your Sprint PCS Phone on,check to see that the charged battery pack has been
installed in the back of the phone or that you have an external power source
(the cigarette lighter adapter or the hands-free car kit). Then. simply press END/(13 until the red light at the top
of the phone is lit. Now you're ready to make a call.
Turning off the phone is just as simple. Press END/Q) for a few seconds.The display will by blank when the
power is off,
Taking your battery pack out.
1. First,turn the power off to avoid losing stored numbers and messages.
2. Press the battery release latch on the back of the phone while sliding the battery out.
Charging your battery pack.
You can tell whether or not your battery needs to be recharged just by checking the???eomer of your phone's
display,where the battery charge indicator is located. When the battery charge level is low,the battery icon will???
and the phone will sound a toner???Wltat does the phone do if the charge is low???
If you continue to use your phone without recharged and the battery level becomes too Iow,it will turn off
automatically. If this happens, unfortunately you'll lose whatever you were just doing. So,watch the indicator and
make sure your level is okay.???ls any of this true for the Samsung phone???
To charge your battery, you should use the Sprint PCS desktop charger, travel charger of cigarette lighter adapter
from Samsung.(The desktop charger is described in the next section.
For more information on the travel charger and cigarette lighter adapter,see the product user guide for each.)
SCH-6000 FCC DOCUM TS w
ELECTRONICS
Using the desktop charger.
First of all,a few words of wisdom of waminngou should only use the Samsung-approved desktop charger and
AC adapter with this Sprint PCS Phone.Using the wrong one could cause damage.
I. Plug one end of the AC adapter into the charger and the other end into a wall outlet.
2. Insert either the battery pack alone or the phone with the battery pack installed into the slot.
A RED light on the charger will let you know the battery is being charged. A GREEN light tells you when the
battery is at least 90 percent charged.
If your battery's charge is completely run down,it will take about 277? hours to fully recharge it.
With the Samsung-approved7?7name of battery type (like lithium ion was for Sony)
battery pack you don’t have to completely discharge the battery before discharging it. If you leave your phone
turned on while's in the charger,your battery will take longer to charge.
Function keys:What they make happen.
TALK:Press this key to place a call,to access a second incoming call or to initiate Three-Way Calling.
CLR: This key lets you do lots of things:
To erase one character from the display screen,briefly press it one.
To erase all of the them.hold it down.
. To go back one level when you're accessing a menu,briefly press it once.
To revert back to the standby display. hold it down. ?7?ls this true???
END/@:Press this key to disconnect a call. You can also press it to exit out of a menu and return to the
phone's standby display.
MENU: Press this key to display the phone’s main menu.
0K:Press this key to store a number in the phone‘s internal phone book.
ENVELOPE ICON: Press this key to check your voicemail messages. (For more information on voicemail,see
page W.)
we
ELECTRONICS
SCH-6000 FCC DOCUME
Phone calls: How to make and receive them.
Whenever you make a call,follow these simple steps:
1, Firsl.check to see that your Sprint PCS Phone is turned on. If you see the display indicators
on the screen,that means the power is on,
2. Enter the number you're calling.
3. Press TALKr
4. When you're finished with your eeluusl press END/(D to diseonneelr
Correcting a misdial,
If you make a mistake while dialing a phone number,press CLR to erase the number one digit a! a time. You
can delete the enlire number at once by pressing CLR and holding it down for at least one second.
Remembering your phone number
You probably don’t call your own Sprint PCS Phone number very ofien,so you may forget it. If you do,here‘s an
easy way to get it:Turn your phone on and your number will be displayed brieflyr
If you miss it,press MENU,pressZ to select "Phonebook"and then pressz to display your number.
Answering calls.
When your phone rings,silnply press any key(other than ENDI® or the volume keys>lo answer. To disconnect
when you're through, press END/(D.
Using Caller ID.
This feature tells you who is calling you on your Sprinl PCS Phone by displaying the caller's number when the
phone rings. (If lhe caller's name and number are stored in your internal phone book‘the caller's name will be
displayedJoo) lf you call someone who has this featuresyour Sprint PCS Phone Number will be displayed on their
phone.
s @
ELECTRONICS
SCH-6000 FCC DOCUM
To block your Sprint PCS Phone Number from being displayed for a particular outgoing calljust follow these steps
1. Press * 6 7
2. Dial the outgoing phone number and press TALK.
To block your Sprint PCS Phone number from being displayed on all of your outgoing calls. just call Sprint PCS
Customer Care by pressing * 2 TALK(in Southern Califomia,press * 6 l l TALK)
Once you have permanently blocked your number,you can release the block for a particular all. To do that follow
these steps:
1. Press “ 8 2.
2. Dial the phone number and press TALK.
Responding to Call Waiting.
if you're in the middle ofa call and you here a beep,that means you have another calling coming in. If you don'
t answer the call within 10 seconds. you will be reminded of the incoming call with a second beep. To answer
the second call.press TALK. Press TALK again to switch back to the first call.
If you don't want to be interrupted during a particular eall,you can temporarily disables Call Waiting. Just press
* 7 0 before dialing the number. If you don't want to be interrupted during any of your calls.before making any
more press " Z TALK(in Southern California, press " 6 7 l 1 TALK)to call Sprint PCS Customer Care and
have Call Waiting deactivated.
Red ialing calls.
To redial the last call you made from your Sprint PCS Phone,press TALK twice. To redial any of the last 9
calls that either made,missed,received of addedselect a number from either your incoming missed or outgoing
call log (see page 1777). ???ls this true???
Setting up a three-way call.
Three-Way Calling lets you talk with two different people at the same time. Simply dial the first number and
press TALK. When you have connected,press TALK to put the first caller on hold. Next,press CLR,dial the
second number and press TALK. When you're connected, press TALK again to begin your three-way call.
Using Call Forwarding.
SCH-6000 FCC DOCUMENTS @
ELECTRONICS
With Call Forwardingyou can have all of your incoming calls forwarded to another phone number-even if your
Sprint PCS Phone is turned off. Even when Call Forwarding is activated,you still can make calls from your
Sprint PCS Phone. To activate Call Forwarding. follow these steps:
1. Press * 7 2.
2. Once you‘ve decided where you want your calls forwarded. enter the area code and the seven-digit phone
number.
3. Then press TALK. You will hear a tone that confirms you've activated Call Forwarding.
To deactivate Call Forwardingpress ‘ 7 2 0 TALK. Once again,you'll hear a tone to confirm the deactivation.
Saving or editing your own emergency numbers.
You can save up to three emergency phone numbers on your Sprint PCS Phone, in addition to 91], To save
those nun|bers,follow the steps below,
1. Press MENU.
2. Press 6 to select "Security".
3. The phone prompts, "Lock Code:" Enter your four-digit lock code (typically this code is the
last four digits of your Sprint PCS Phone Number). Once you've successfully entered your
lock code,the phone displays the security menu,
4. Press 4 to select "Emergency#", The phone displays your security numberstif no security
numbers have been saved,"Empty"is displayed in each slot.
5. Select an emergency number slot by pressing the appropriate number.
6. Enter the lO-digit emergency number(area code +phone number)to be saved in that slot and
press OK.
7. The phone displays the number and "Saved"to confirm that the number was stored correctly.
The phone then redisplays the list of emergency numbers so you can make additional
changes,
8. When you have finished storing numbers,press and hold CLR to exit and return to the
standby display.
SCH-6000 FCC DOCUMENTS w
ELECTRONICS
Dialing 911 or other emergency numbers.
if there's an emergency,you still can make calls even when your phone is locked. (For information on locking your
phone,see page 1???) If your account is restricted,you still can call
91] but no other emergency numbers. To make a call,follow these simple steps:
1. Dial 911 or one of the other three emergency numbers stored in your emergency list.
2. Press TALK.
Dialing Sprint PCS Directory Assistance
Dial 4 l 1 TALK to obtain residential,business and government listings; to get help completing local or long-
distance calls;or to obtain movie Iistings.hote|,restaurant and shopping information,and major local event information.
Dialing Sprint PCS Operator Services
Dual 0 to obtain assistance in placing collect call or call billed to a local telephone calling card or a third party.
Voicemail; The ins and outs.
Setting up your voicemail.
The first time you call your voicemail box,which you do by pressing and holding ENVELOPE for
at a second,enter "SPRINT"(777468)as your temporary pass coed. We suggest you do this soon afler you activate
your Sprint PCS Account.
Afier entering that coed,the voicemail syslem will prompt you to do these things:
Create your own personal pass code. Make sure you pick a number that you will remember.
Create the greeting that people will hear when they call you.
Initialize your name announcement.
Choose whether to activate One-Touch Access,
Afler you‘ve set up your voicemailJt will automatically record messages whenever someone calls and you don't
answer. Whenever you need to call your voicemail from your home or business phone,dial your Sprint PCS Phone
Number,press‘ and enter your pass code.
SCH-6000 FCC DOCUMENTS @
ELECTRONICS
Finding out you have a message.
Your Sprint PCS Phone alerts you when you have new voicemail message in several ways:
By displaying a message on the screen
. By sounding five short heepslif the ringer is turned on)
By flashing the red light at the top of the phone
By displaying the ENVELOPE icon at the lop of your screen
To acknowledge a new message,you can press any key. The red light will continue to flash and a reminder beep
will sound every two minutes until you do this.
Once you've acknowledged a message,your phone will then redisplay whatever was on the screen before the alen.
The phone will display ENVELOPE until you save or erase your new messages, You can save up to 30 messages
and each can be stored for up to 30 days.
Retrieving messages.
Whenever you access your voicemail,you‘ll be given the following options:
To listen to new or saved messages. press I.
. To change XQ‘ELHQQT‘ELM» such as your personal greeting,press 3,
When you listen to your messages.here are all the things you can do:
To hear the date and time of a message,press 5.
To erase a messagespress 7.
To 391"! a call, press 8. (You can do this only when a callback number is attached.) See page
?77for more information on the callback feature.
To save a message,press 9. (You can save up to 30 messages and each can be saved for up to 30 days)
To skip to the next message, press fldown arrow.
To go backiseeonds. press 1.
To advance IO seconds, press 3,
ELECTRONICS
SCH-6000 FCC DOCUM
To replay the meiage, press 4.
Using special Sprint PCS Phone Features.
Your new phone comes with several key features that make voicemail particularly easy to use.
One-Touch Access To call your voicemail from your Sprint PCS Phone. all you have to do is
press and hold ENVELOPE for at least a second(if One-Touch Access is
activated). You don't have to enter your pass code. This feature is
available only from your Sprint PCS Phone.
Hands-Free Your messages will be played continuously in the order they were
Listening received. You can stop to save or erase any of them.
Callback When you're listening to a messageyou can return the cal] instantaneously
by pressing 8. Callers can attach a callback number by pressing M alter
their messages. (You may want to give this instruction in your greeting.)
When you're finished returning the call, press * * to get back to voicemaii
Page Integration Sprint PCS offers several paging options to use with your Sprint PCS
Phone. This means if you choose to buys a Sprint PCS Pager, your pager,
voicemail and PCS phone will have one integrated number to help make
things easy.
Paging Link If you own a Sprint pager (not Sprint PCS Paging), your Sprint PCS
Phone and voicemai] may be integrated with that service. Just call Sprint
PCS Customer Care by pressing * Z TALK (in Southern California, press
* 6 1 1 TALK)t‘or more information.
Internal phone book.
You get two types of phone books with your Sprint PCS Phone: the internal phone book and the call logs. To
make the lnost of them,you really need to understand all basic features and functions of your new phone.
Understanding your phone's memory.
Your Sprint PCS Phone had??? phone book memory locations -that is??? 179 places to store phone number. You
can store up to 32 digits within each of these memory locations and use up to 12 characters to give each entry 3
name,
SCH-6000 FCC DOCUMENTS w
ELECTRONICS
Saving and storing a phone number.
When adding numbers to your internal phone book,keep in mind that memory locations 1 through 9 should be
used for One-Touch Dlaling???l couldn’t find anything to suggest that the Snmsung interface offers one-touch
dialing??? or your most commonly used phone numbers. To save numberssimply follow the directions below.
1. Enter the number that you want to save and press OK. We suggest that you save numbers
using 10 digits {area code + number). The phone displays the next available memory location
along with your entry.
2, Press OK again to save the number in the memory location. To instead save the number to
a ditferent memory location,enter that location number and then press OK. ???(‘an I enter
pauses,|ike on the Sony phone???
ll“ that memory location already has a number stored in it, the phone prompts,"Replace?"
Press OK to replace it with the new number-pr press CLR to enter a different memory
location.
3. Next,enter the name that goes with the number. ???is there a way to enter punctuation???
Press the key of the first letter in the name,and continue until you've spelled the whole
itame. Pressing a key repeatedly will change the letter or number in the cursor position on
the screen. (For examplepress 2 once for "A". Press 2 twice for "B".)
As you press each key,the cursor will advance automatically. To enter a space, press 3.
Press CLR or * or # to correct any mistakes.
4. When the name is entered correctly. press OK. The phone displays the name, number and
"Saved" to confirm that the number is stored. ???Can i change uppercase to lowercase, and
vice versa???
Checking all your stored numbers.
Several methods can be used for checking numbers stored in your phone. You can look tip
a number using a name,digits from the phone numberor memory location. Each is described
separately below. Follow the steps described below to find stored numbers using the menu
options.
1. Press MENU.
IQ
. Press 2 to select ”Phone Book".
3. Press 1 to select "Find name" or press 4 to select "Find Entry".
Shortcuts for looking up numbers by memory location and name also are availableas described in the next
SCH—6000 FCC DOCUMENTS 41W
ELECTRONICS
sect ions.
Finding a number using
memory location.
1. Press MENU.
Press 2 to select "Phonebook"
3. Press 4 to select "Find Entry"
4. Enter the three-digit memory location to display the number
5, To call that number, press TALK.
Finding a number using a person's name.
I. Press MENU.
2. Press 2 to select "Phonebook"
3. Press 1 to select "Find Name"
4. Enter as many consecutive letters of the name as you can remember(even if you remember
only the first Ietter)and press OK. The phone briefly displays the number of matches found
and then displays the name and number of the first match. If the number displayed is not
the one you want‘ press * or a to scroll through the list until the appropriate number is
displayed.
to
, When you have found the correct number, press TALK to dial it automatically,
???Do we offer speed dial on the Samsung phone?
Editing a phone number.
I. First,find the number that you want to edit.using one of the methods described in the
previous sections.
2. ??’.‘I couldn't figure out how to edit an existing stored number???
Erasing a phone number.
I. First, find the number that you want to erase
SCH-6000 FCC DOCUMENTS @
ELECTRONICS
2. Press MENU.
3. Press 4 to select “Erase"
4. Press OK to erase the number from the phone book.
???Ihis seems a bit convoluted Is there a fasteunore efficient way???
Keeping track of you calls.
Your Sprint PCS Phone keeps track of the last nine calls you made and the last nine calls you
received. To display a list of recently made calls, follow these steps.
I. Press MEN
2. Press 1 to select "Calls".
3. To display information on your last nine outgoing calls. press 1. To display information
on your last nine incoming calls, press 2. To display information on your last nine missed
calls, press 3.
4. The phone then displays the phone numbers of your calls, one at a time. To scroll through
the list, press * or #.
5. To dial a display number, simply press TALK. Otherwise, press and hold CLR to exit
and return to the standby display.
Dialing from your phone book to a different area code.
When you're traveling outside your home service, or when you're calling someone back
from within voicemail, you may need to add an area code to the number. To temporarily add
digits to the beginning of a phone number, follow these steps:
1. Find the number you want to call. This can be done in several ways. (See page 77? for
more information.)
Press MENU.
Press 3 to select ”Prepend"
4. Enter the area code.
3. Press TALK to dial the modified number.
ELECTRONICS
SCH-6000 FCC DOCUME
Main menu: Tailoring your phone's features to your needs.
You can access all of your phone's features and settings through the main menu. Here's how
to to about it.
Navigating through the menu.
To display the main menu, press MENU.
To SE)“ through menu items, press * or rt.
To go hack oneflstefip, press CLR briefly.
To select a menu item, press the number corresponding to it.
To scroll throughLmsiole settipg. press * or #.
To 5?” a setting, press OK..
To exit the menu and return to the standbyscjaen, press END/(D or press and hold CLR.. No changes will be
saved,
Taking a menu shortcut.
If you're in a hurry, just press MENU and the numbers on the menu screen. For example, if
you press MENU, followed by 4 and 1, the phone will display the volume setting for the
ringer.
Understanding menu items: Managing your phone's settings.
Keeping track of c
1: Calls. These options help you remember whom you called and who called you, along
with how much airtime you have used. Times are displayed in hours, minutes and seconds
(for example, 00311 59m 23s).
I: Outgoing. Lists, one at a time, the last nine numbers you called, Press * or # to
scroll through the list.
2: Incoming. Lists, one at a time, the numbers of the last nine callers to your Sprint
PCS Phone. Press ” or Ft to scroll through the list.
SCH-6000 FCC DOCUMENTS dfifl’
ELECTRONICS
3. Missed. Lists. one at a time, the last nine numbers you missed. Press ‘ or # to
scroll through the list.
4: Air Time. Cheek to see how much air time you have used by selecting this option.
1: Last Call. Displays the phone number of your last call, the date and titne
the call was made, and the duration of the call.
2: Total. Displays the total number of calls made and received, along with the
total amount of airtime used.
3: Erase Total. To reset your air time log to zero, press OK. To maintain
the leg. press CLR.
Maintaining your internal phone book.
2: Phone Book. These options lets you manage the numbers stored in your phone's internal
phone book.
I: Find Name. Lets you look up numbers stored in your internal phone book.
Enter as many consecutive letters of the name that you know and
then press OK. (Entering only the first letter of the name still helps narrow
your search.) The phone indicates how many matches were found and then
displays the first number and name from the list of matches. To scroll through
the list, press * or a. To dial a displayed number, press TALK.
2: My Phoneft. Displays your Sprint PCS Phone number.
3: Add Entry. Lets you store a phone number in the phone's intemal phone book. Enter
the number to be stored and then press OK. To store the number in the next
available memory location. press OK again. Next, enter the name that will be used to
identify the number and press OK.
4. Find Entry : Enter the two-digit memory location code that corresponds to the
number you want to find. To scroll through the entire list of stored numbers,
press * or 35. To dial a displayed number. press TALK.
5: Services. When you need assistance making calls or if you have questiorts about your
Sprint PCS Phone or service, you can select this option.
1: DirAssist. Lets you connect to ??‘.’ a Sprint operator to get assistance in making
calls.
2: Customer. Dials Sprint PCS Customer Care.
3: Prepaid
SCH-6000 FCC DOCUMENTS w
ELECTRONICS
Adjusting your phone's volume.
3: Sounds. Here's how to adjust the volume of your phone's ringer and key beep.
1: Ring Vol. To adjust the ringer, you can press either " or fit, or the volume keys.
Setting are "off," "low," ”med" and "high." "l-beep+vibrate" The default is
Once you select the level you want, press OK to set it.
2: Ring Type. Determine the sounds your phone makes when you receive a call or
messagesalarm.
Press * or it to scroll through the possible settings. As you scroll through the list, you
will hear a sample of the ringer selling. When you find the ringer setting you want,
press OK to save it. ??? Is there a default setting???
3: MSG Ring. To adjust the message ringer,
you can press either * or it, or the volume keys.
Setting are "off," "low," "med" and "high." "l-beep+vibrate" The default is 777.
Once you select the level you want. press OK to set it.
4: Key Vol. To adjust the beep your phone makes when you press a key, select this
option. Press * or it or the volume keys. Setting are OFF, LOW, MED and HIGH,
The default is 777. Once you select the level you want. press STO to set it.
5: Tone Length. You can determine the length of the tone your phone makes when
you press a key. Possible settings are "short" and "long". The default setting is
"short",
6: Alan vol. The sounds menu provides the option of adjusting the volume of the Service
alens you select from the Alerts menu
Determining what is displayed.
4: Display. Determine some of the attributes of your phone's display by modifying these
settings.
I: Backlight. You can manipulate the display and keypad backlighting. Possible
settings are OFF 10 SECONDS, 30 SECONDS, and "FLIP OPEN".
The default setting is 10 SECONDS.
2: Greeting. This option lets you put whatever you want on your phone‘s display
screen just so long as it's no more (Iran 12 characters. This banner will be displayed on
the top line whenever your phone is on. Enter text for your banner in the same way
you enter names with stored phone numbers (see page ???.
SCH-6000 FCC DOCUMENTS @
ELECTRONICS
3; Version. Displays the version number of the soflware installed on your Sprint PCS
Phone,
Maintaining Phone security.
5: Security. You have the option to lock your Sprint PCS Phone to keep others from using it
when you don’t want them to. Locking your phone means that you can still receive incoming
calls or making emergency calls, but all other phone functions are disabled.
Your lock code typically consists of the last four digits of your Sprint PCS Phone Number. If
you choose to change it, however, and then forget it. you will have to call Sprint PCS
Customer Care for assistance. Press " 2 TALK to call Customer Care (in Southern California,
press * 6 l l TALK).
To access the security menu and modify the settings, you must first enter your lock code.
1: Lock. First. you should decide when you want your phone to be locked. Possible
settings are "oft". "lock now'I and ”on power-up", If you choose "on power up" your
phone will be locked when you turn it on. if you select "lock now", your phone will
be locked 77? I don't understand these options ?'.’? Default setting???
2: Limit use. With restrict mode, you control what calls can be made from your phone,
Regardless of the restriction setting you will always be able to receive calls.
1: Outgoing. Determine whether outgoing calls can be made from your
Sprint PCS Phone with this option. Possible settings are "No Limit". "Phonebook"
and "Special we". The default setting is 77? Select an option by pressing
" or it and then press OK to save your selection.
2: Incoming. Determine whether incoming calls can be received on your
Sprint PCS Phone. Possible settings are "No Limit" and "No Calls". Select an
option by pressing * or # and then press OK to save your selection.
3: Phone Book. Determine whether outgoing calls from your Sprint PCS
Phone should be limited to numbers stored in the internal phone book.
Possible settings are "Full Access". "Read only"and "No Access".
The default setting is 777.
Select and option by pressing * or it and then press OK to save your selection,
4. Roaming. Determine whether your Sprint PCS Phone be limited in Roaming status.
Possible settings are "Full Access" .”Incoming”,"0utgoing", and "No Access".
The default setting is '!?'.’.
Select and option by pressing * or # and then press OK to save your selection.
SCH-6000 FCC DOCUMENTS w
ELEmoNlcs
3: Lock Code. If you don‘t want to use your phone's original lock code, you can use
this option to enter your own new four-digit number. Be sure to pick a number that
easy for you to remember.
4: Emergency #. You can enter up to three emergency number and you can call all of
them. along with 9“, even when your phone is locked. When you dial an emergency
number, it must exactly match the stored number in order to override the lock and
restriction settings.
5. Erase
1.Ca|ls . Erase Select options is only outgoing, only incoming, only missed, and All logs.
2.Phonebook, Erase Whole Phonebook.
3.Message. Erase Page/Txt message.
6: Reset Phone. ??’.’ What does this reset '.".".’
Choosing the right alerts.
6: Alert. Your Sprint PCS Phone comes with different options to keep you aware of what's
going on,
1: Minute Beep This option is like a minute minder that beeps 10 seconds before
each minute is up during a all. Settings are "on" and "off". The default setting is ?77.
2: Service. What does this do??? Settings are "on" and "off". The default setting is 777.
Customizing the way your phone works.
7: Setup. With the help of the following features, you can make your phone work more like
you do.
1; Any Key Ans. You can determine whether you can press any key to answer
incoming calls. Possible settings are "on" and "off". The default setting is "on".
2:Ta|k Key when you press SEND in standby status, You can determine whether list is
Accessed. Possible settings are “Calls" and "Phonebook"
8: Alarm. You can set the 24-hour alarm to sound an Alert at the set time, when phone is on.
9. Keyguard. The keyguard feature is available in Stanby mode to prevent accidental dialing while
the phone is on but not in use. and prevent excess battery drainage.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Modify Date                     : 1999:01:11 11:47:25
Creator                         : Acrobat 3.0 Scan Plug-in
Producer                        : Acrobat 3.0 Scan Plug-in
Create Date                     : 1999:01:11 11:46:52
Page Count                      : 18

EXIF Metadata provided by EXIF.tools