Samsung Electronics Co SCHX659 Single-Mode Cellular Phone (CDMA) User Manual

Download:
Mirror Download [FCC.gov]
Document ID	418020
Application ID	mxfVRJDBjYZmQKHe6ZS+Ag==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	103.09kB (1288684 bits)
Date Submitted	2004-04-27 00:00:00
Date Available	2004-04-27 00:00:00
Creation Date	2003-10-27 11:35:26
Producing Software	Acrobat Distiller 4.0 for Macintosh
Document Lastmod	2004-04-27 10:37:27
Document Title	Users Manual

* Some of the contents in this manual may differ from your phone,
depending on the software installed or your service provider.
PORTABLE CELLULAR
TELEPHONE
SCH-X659
User’s Manual
ELECTRONICS
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No. : GH68-04480A
Eng. 10/2003. Rev.1.0
FCC RF EXPOSURE INFORMATION
In August 1996 the Federal Communications Commission (FCC) of
the United States with its action in Report and Order FCC 96-326
adopted an updated safety standard for human exposure to radio
frequency electromagnetic energy emitted by FCC regulated
transmitters. Those guidelines are consistent with the safety
standards previously set by both U.S. and international standards
bodies. The design of this phone complies with the FCC guidelines
and these international standards.
Use only the supplied antenna or one that is approved.
Unauthorized antennas, modifications, or attachments could impair
call quality, damage the phone, or result in a violation of FCC
regulations.
Do not use the phone with a damaged antenna. If a damaged
antenna comes into contact with the skin, a minor burn may result.
Please contact your local dealer for a replacement antenna.
Body-worn Operation
This device was tested for typical body-worn operations with the back
of the phone kept 1.5 cm. from the body. To maintain compliance
with FCC RF exposure requirements, use only belt-clips, holsters
or similar accessories that maintain at least a 0.59 inch (1.5 cm.) separation
distance, between the user's body and the back of the phone, including
the antenna, whether extended or retracted. The use of belt-clips,
holsters and similar accessories should not contain metallic
components in its assembly. The use of accessories that do not
satisfy these requirements may not comply with FCC RF
exposure requirements, and should be avoided.
Vehicle Mounted External Antenna (optional, if
available.)
A minimum separation distance of 7.9 inches (20cm) must be
maintained between a person and the vehicle mounted external
antenna to satisfy FCC RF exposure requirements.
For more information about RF exposure, please visit the FCC web
site at www
Table of Contents
IMPORTANT SAFETY PRECAUTIONS ................................. 7
UNPACKING .................................................................. 9
YOUR PHONE ............................................................... 10
Phone Layout ..............................................................................
Display .......................................................................................
Backlight ........ ............................................................................
Service Light ...............................................................................
10
11
15
15
GETTING STARTED ......................................................... 16
Using the UIM Card ...................................................................... 16
Using the Battery ........................................................................ 18
Switching the Phone On/Off ........................................................ 24
PIN Code .................................................................................... 25
Your Phone’s Mode ....................................................................... 25
CALL FUNCTIONS ........................................................... 28
Making a Call ............................................................................... 28
Ending a Call ................................................................................ 29
Emergency Dialing ........................................................................ 29
Using the Resent Call Log .............................................................. 30
Making a Call from the Phonebook ............................................... 31
Prepend Dialing ............................................................................ 31
Speed Dialing ............................................................................... 32
Pause Dialing ............................................................................... 33
Adjusting the Volume During a Call ................................................ 35
Muting the Ringer Volume ............................................................. 35
Answering a Call ........................................................................... 36
Rejecting a Call ............................................................................. 37
Viewing Missed Calls ..................................................................... 37
Options During a Call .................................................................... 38
Call Waiting .................................................................................. 39
Call Forwarding ............................................................................ 40
Three-Way Calling ........................................................................ 40
ENTERING TEXT ............................................................ 41
MESSAGE ...................................................................... 76
Changing Text Input Mode ...........................................................
Chinese Pinyin Mode ...................................................................
Chinese Stroke Mode ...................................................................
T9 Word Mode .............................................................................
ABC Mode ...................................................................................
Symbol/Symbol2 Mode ...............................................................
123 Mode ...................................................................................
New Message (MENU 3-1) ......................................................
Inbox (MENU 3-2) ..................................................................
Outbox (MENU 3-3) ................................................................
Erase Msgs (MENU 3-4) ..........................................................
Msg Setup (MENU 3-5) ...........................................................
Web Alert (MENU 3-6) ............................................................
42
43
48
51
53
55
55
USING THE MENUS ........................................................ 56
Accessing a Menu Function by Scrolling ........................................ 56
Accessing a Menu Function by Using its Shortcut ........................... 57
List of Menu Functions ................................................................. 58
CALLS ........................................................................... 62
Missed (MENU 1-1) ................................................................
Incoming (MENU 1-2) ............................................................
Outgoing (MENU 1-3) ............................................................
Erase Logs (MENU 1-4)............................................................
Air Time (MENU 1-5) ...............................................................
Call Forward (MENU 1-6) ........................................................
Call Waiting (MENU 1-7) .........................................................
62
63
63
63
64
65
66
PHONEBOOK ................................................................ 67
Find (MENU 2-1) .................................................................... 67
Add (MENU 2-2) .................................................................... 70
Group Set (MENU 2-3) ........................................................... 75
My Phone # (MENU 2-4) ........................................................ 75
77
79
80
82
83
85
SCHEDULER .................................................................. 86
View Month (MENU 4-1) ........................................................
Jump To Date (MENU 4-2) .....................................................
Alarm Set (MENU 4-3) ...........................................................
Calculator (MENU 4-4) ...........................................................
Today (MENU 4-5) .................................................................
To Do List (MENU 4-6) ...........................................................
Memo Pad (MENU 4-7) .........................................................
Countdown (MENU 4-8) .........................................................
World Time (MENU 4-9) .........................................................
86
88
89
90
91
91
93
94
95
GAMES ......................................................................... 96
Couple Bowling (MENU 5-1) .................................................. 97
Honey Ball (MENU 5-2) ......................................................... 98
SETUP ......................................................................... 100
Sounds (MENU 6-1) ............................................................. 100
Display (MENU 6-2) .............................................................. 105
Auto Key Lock (MENU 6-3) .................................................. 110
Auto Retry (MENU 6-4) ......................................................... 111
Auto Answer (MENU 6-5) ..................................................... 111
Answer Mode (MENU 6-6) .................................................... 112
Roam Option (MENU 6-7) .................................................... 112
Security (MENU 6-8) ............................................................ 113
Entry Method (MENU 6-9) .................................................... 119
Data Option (MENU 6-#) ..................................................... 119
U-MAX ....................................................................... 120
U-Info (MENU 7-1) .............................................................. 120
UNI-INFO (MENU 7-2) ......................................................... 121
HEALTH AND SAFETY INFORMATION ............................. 122
GLOSSARY .................................................................. 134
QUICK REFERENCE CARD ............................................. 137
Important Safety
Precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal. For more detailed safety
information, see “Health and Safety Information” on
page 122.
Road Safety at All Times
Do not use a hand-held phone while driving; park the
vehicle first.
Switching Off When Refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using them
in aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special Regulations
Meet any special regulations in force in any area and
always switch off your phone whenever it is
forbidden to use, or when it may cause interference
or danger (in a hospital for example).
Important Safety Precautions
Unpacking
Sensible Use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Your package contains the following items.
Accessories and Batteries
Use only Samsung-approved accessories and
batteries.
Qualified Service
Only qualified service personnel may install or repair
your phone.
Phone
Batteries
Travel Adapter
Finger Strap
Owner’s
Manual
Your Phone
Your Phone
Display
Phone Layout
The following illustration shows the main elements
of your phone.
The display comprises two areas: an upper line of
static icons, and the lower text and graphic area.
Icons
Text and graphic
area
Antenna
Menu
Find
Soft key indications
Earpiece
Ear Microphone
jack
Display
Volume keys
During a call,
adjust the voice
volume.
In Standby mode,
adjusts the tone
volume.
Keys
Key
Service Light
Microphone
Functions
Perform the functions indicated by the text
above them, on the bottom line of the
display.
In the menu facility, scrolls through the
menu options.
In Standby mode,
allows you to enter
the U-MAX menu,
allows you to
enter the Games menu, allows you to
enter the Message menu, and allows
you to view month.
Interface Connector
10
11
Your Phone
Keys (continued...)
Key
Functions (continued...)
Makes or answers a call.
In Standby mode, access the recent call
logs.
Ends a call. Also switches the phone on and
off when pressed and held.
In the menu facility, returns to Standby
mode and cancels your input.
Deletes characters from the display.
In the menu facility, returns to the previous
menu level.
Enters numbers, letters and some special
characters.
In text entry mode, changes the appearance
of input.
In Standby mode, enters the Keypad Lock
mode when pressed and held.
In Standby mode, quickly enters/exits the
silent mode when pressed and held.
In text entry mode, inserts a space.
12
Your Phone
Icons
Signal Strength : Shows the received
signal strength. The greater the number of
bars, the better the signal strength.
Service: Appears when a call is in
progress.
No Service: Appears when you are outside
a service area. With it displayed, you cannot
make or receive calls. Wait a little while for
a better signal or move into an open area to
regain the service.
Roaming: Appears when you are out of
your home area and have registered with a
different network (when travelling in other
countries, for example).
New Message: Indicates that there is a
new message waiting to be checked.
Alarm Mode: Appears when you set the
alarm.
Lock Mode: Appears when your phone is
locked.
13
Your Phone
Your Phone
Icons (continued...)
Backlight
Vibration Mode: Appears when the ring
volume for calls is set to Vibrate and
Silent Mode.
Ringer Silent : Appears when the ring
volume for calls is set to Silent.
Battery Status: Shows the level of your
battery. The more bars you see, the more
power you have left.
The display and keypad are illuminated by a
backlight. When you press any key, the backlight
illuminates. It turns off if no key is pressed within a
given period of time, depending on the Backlight
option set in the Display menu.
To specify the length of time the phone waits before
the backlight turns off, set the Backlight menu
option (6-2-3); see page 107 for further details.
Service Light
The service light is at the outline of the navigation
key. It flashes to indicate incoming call or message.
Also, the service light flashes for a few seconds
when you turn on the phone.
To make the service light turns on, set the Service
LED menu option (6-2-7); see page 109 for further
details.
14
15
Getting Started
Getting Started
Removing the UIM Card
Using the UIM Card
The UIM(User Identification Module) card contains a
chip with all the information required to operate the
phone. Note the following:
Slide the UIM card out of the slot.
Note: Despite of no UIM card in the phone, you can
make emergency call.
• Keep all miniature UIM cards out of the reach of
small children.
• The UIM card and its contacts can easily be
damaged by scratching or bending, so be careful
when handling, inserting or removing the card.
Installing the UIM card
1. If necessary, remove the battery by referring to
page 19.
2. Slide the UIM card into the slot ensuring that the
notched corner is at the top left and the gold
contacts of the card face into the phone.
16
17
Getting Started
Using the Battery
Your phone is powered by a rechargeable Li-ion
battery. Use only approved batteries and chargers.
Ask your local Samsung dealer for further details.
2. Push the battery against the back of the phone
until it clicks into place.
Make sure that the battery is properly installed
before switching the phone on .
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
180 minutes for a standard battery.
Installing the Battery
1. Insert the teeth at the bottom of the battery into
the corresponding slots.
Removing the Battery
1. If necessary, switch off the phone by pressing and
holding the
key down until the power-off
animation is displayed.
2. To remove the battery, push and hold the catch
above the battery on the back of the phone and
lift the battery away.
18
19
Getting Started
Charging the Battery
Using the Travel Adapter
Note: The phone can be used while the battery is
charging, but this will cause the phone to
charge more slowly.
Getting Started
3. When charging is completed, unplug the adapter
from the power outlet.
Unplug the adapter from the phone by pressing
the grey tabs on both sides of the connector and
pulling the connector out.
1. Plug the travel adapter’s connector into the
bottom of the phone. Check that the arrow on the
connector is facing towards the front of the
phone.
2. Plug the adapter into a standard AC wall outlet.
A bar indicating the charging progress appears on
the display. While charging, the Battery Strength
icon at the top right-hand corner of the display
repeatedly fills to show its charging.
20
21
Getting Started
Getting Started
Using the Battery Charger
Low Battery Indicator
Using the battery charger, you can charge the battery
alone.
When the battery is weak and only a few minutes of
talk time remain, the battery sensor will let you know
by blinking the empty battery strength icon (
and you will hear a warning tone and a message will
be repeated at regular intervals on the display. When
the battery becomes too weak for the phone to
operate, it switches off automatically.
1. Plug the travel adapter’s connector into the
bottom of the battery charger.
2. Insert the teeth at the bottom of the battery into
the slot of the battery charger and push the
battery against the battery charger until it clicks
in place.
3. Plug the travel adapter into a standard AC wall
outlet.
4. The LED indicates the status of the battery being
charged.
•Red: the battery is charging.
•Green: the battery is fully charged.
•Orange: the battery is not seated correctly or
the adapter is not plugged in correctly.
Check the battery and adapter.
5. To remove the battery, push and hold the
catch above the battery charger and lift the
battery away.
Insure that the charger has been disconnected
from the wall outlet before removing the battery.
22
23
Getting Started
Switching the Phone On/Off
1. Press and hold
for more than one second to
switch the phone on.
2. If the phone asks for a Personal Identification
Number(PIN) code, enter the PIN code supplied
with the UIM card. For further information on the
PIN code, see page 117.
The service light flashes, and an alert sounds.
When the system locates services, you can see
the idle screens on the main display.
If the phone is out of service, the No Service icon
appears in the display. In this case, you cannot
place and receive calls. You can try again later
when service is available.
Note: You can change the display language via
the Language menu option (6-2-4). See
page 107.
3. When you wish to switch the phone off, Press
and hold
for more than two seconds.
Getting Started
PIN Code
The PIN code supplied with the UIM card helps you
protect the UIM card against unauthorized use.
When requested the code, key in the appropriate
code (displayed as asterisks for security). If you enter
an incorrect PIN code three times in succession, your
UIM card is blocked. To unblock the card, contact
your service provider.
You can enable or disable the code using the Card
Setup menu option (6-8-8). For further information
on the PIN code, see page 117.
Your Phone’s Mode
Standby Mode
Standby is the most basic state of your phone. The
phone goes into Standby mode soon after you turn it
on, or whenever you briefly press
. When your
phone is in Standby mode, you will typically see the
current date and time. If you enter a phone number,
you can press
to dial it, or press
to save it
in the internal Phonebook.
Press
at any time to return to Standby mode. Be
careful; if you are on a call when you press
, you
will return to Standby mode, but it also disconnects
the call.
24
25
Getting Started
Getting Started
Talk Mode
Key Guard Mode
You can place and answer calls only when your
phone is turned on. During a call, the phone is in Talk
mode. While you are in Talk mode, pressing
gives you a list of options referred to as “Options
During a Call” See page 38 for details on the options.
You can lock the keypad by pressing and holding
in standby mode. You can prevent accidental key
pressing with this key guard mode.
Power Save Mode
Your phone comes with a Power Save feature that
will automatically be activated if your phone is
unable to find a signal after 15 minutes of searching.
While this feature is active, the phone’s battery
charge will conserved. The phone will automatically
recheck for a signal periodically.
To manually force the phone recheck for a signal,
press any key. A message on the display let you
know when your phone is operating in Power Save
Mode.
Lock Mode
When you lock your phone using the Lock Mode
menu option (6-8-1), you cannot use the phone. Even
in Lock mode, you can receive messages and calls,
but cannot place an outgoing call until you unlock the
phone.
To unlock your keypad, press
and hold
When you have incoming calls in key guard mode,
the key guard is automatically deactivated and the
phone goes to standby mode. The key guard will be
automatically activated after the predetermined
amount of time.
Silent Mode
Silent mode disables all sounds on the phone. This
feature is best used in situations where the phone
might disturb others, such as a meeting, library,
theater, etc. Your phone can be set to silent mode
with a press of a key in idle mode.
To enter Silent mode, press and hold down
Pressing and holding down
silent mode.
once again exits
To unlock the phone, press , and enter the lock
code. The phone returns to Standby mode.
For further details about locking and unlocking the
phone, see page 114.
26
27
Call Functions
Call Functions
Making a Call
Ending a Call
To make a call, proceed the followings:
When you have finished your call, press
1. In Standby mode, enter the area code and phone
number.
The call time (length of the call) displays with the
number of the called party. If the number is stored in
your Phonebook, the name is displayed. If there is no
match in Phonebook, you can press
and store the
number to the Phonebook. For further information on
storing the number in the Phonebook, see page 70.
While entering a phone number, press
to
insert a hard pause. For more information on
pause dialing, see page 33.
2. Press
. The phone places the call to the
entered phone number.
Note: If you have set the time interval for automatic
redialing in the Auto Retry menu option (6-4),
the phone automatically retries to make the
call. See page 111 for further details.
Correcting the Number
To clear...
Then...
The last digit
displayed
Press
The whole display
Hold down
one second.
28
Emergency Dialing
You can place calls to hard-coded emergency
numbers (119, 110 and 120) or three specified
number in the emergency number list even if your
phone is locked or all outgoing calls are restricted.
For further information on emergency numbers, refer
to page 114.
for more than
29
Call Functions
Call Functions
Using the Recent Call Log
Making a Call from the Phonebook
The phone chronologically stores up to 60 calls
dialled, received or missed. The last call is saved in
first position.
You can store the phone numbers called regularly in
the UIM card and phone memory, called Phonebook.
You then simply recall the number to dial. For further
information on Phonebook, refer to page 67.
To recall any of these numbers, proceed as follows.
1. If there are any characters on the display, return to
Standby mode by pressing
Prepend Dialing
2. Press
The Prepend option lets you add digits such as area
codes and network feature activation codes to a
phone number that is in your Call logs before dialing
it.
. The list of recent calls are displayed.
: for dialed calls
: for received calls
: for missed calls
3. Press up or down navigation key (or the volume
keys on the left side of the phone) to scan through
the list until you find the required number.
4. Press
to dial the displayed number.
To prepend the phone numbers stored in the Call
logs:
1. Access the desired call log in Calls menu.
2. When the desired phone number displays, press
to access the Options menu.
3. Press
to select the Prepend option.
4. Enter the area code or feature code.
5. Press
30
to dial the number.
31
Call Functions
Call Functions
Speed Dialing
Pause Dialing
Once you have stored phone numbers labeled with
Speed Dial in the Phonebook memory, you can dial
them easily whenever you want. See below.
When you call automated system, like banking
services, you are often required to enter a password
or account number. Instead of manually entering the
numbers each time, you can store the numbers in
your Phonebook, separated by special characters
which are called pauses.
By UIM Card Memory
You can dial the phone numbers stored in UIM card
memory. The storage capacity of the UIM card varies
depending on the UIM card.
Enter the memory location of the desired number and
press and hold the final digit to dial.
By Phone Memory
Press the digits of the phone memory location
containing the number to be dialed, and then press
and hold
Your phone has two pause dialing methods: pause
dialing from the Phonebook and manual pause
dialing.
Storing Pauses in a Phonebook Entry
To store a number in your Phonebook that contains
pauses:
1. Enter the phone number you want to store (such
as the bank’s teleservice phone number).
2. Press
to insert a pause. The letter “P”
displays in the number, meaning that hard pause
will occur at that point in the dialing sequence.
The “P”stops the dialing and waits for the
teleservice to prompt you for a number.
The number following the “P” is your account
number, PIN, etc.
3. Enter the digits that need to follow the pause,
such as your account number.
32
33
Call Functions
4. Store the number in your Phonebook as you
normally would by pressing
and following the
screen prompts.
Pause Dialing from a Stored Phonebook Entry
1. Dial the number from the Phonebook.
Call Functions
Adjusting the Volume During a Call
During a call, if you want to adjust the voice volume,
use the volume keys on the left side of the phone.
Press
to increase and
to decrease the
volume. The illustration on the display shows all five
levels; the more bars you see, the higher the level.
2. Wait for the appropriate prompt from the number
you are calling (credit card number, bank account
number, etc.). When prompted, press
to send
the DTMF number that follows your pause.
Muting the Ringer Volume
3. “SENDING DTMF” flashes on the display and the
transmitted tone sounds.
You can mute the ringer volume for an incoming call
by pressing the volume key on the left side of the
phone.
Manual Pause Dialing
You can enter pauses manually using the Dial
options during the dialing process.
1. Enter the phone number of the service you want to
call (such as a bank’s teleservice phone number).
2. Press
to insert a pause.
The screen displays a “P” indicating a pause.
Enter the number to be sent after the pause by
pressing the digit keys, and then press
3. After connecting, wait for the prompt from
teleservice. After the prompt, press
again to
send an additional number.
34
35
Call Functions
Call Functions
Answering a Call
Rejecting a Call
When somebody calls you, the phone alerts you by
ring, and the phone icon is displayed.
To reject an incoming call press
or press
and hold the volume key on the left side of the
phone.
If the caller can be identified, the caller’s phone
number (or name if stored in your Phonebook) is
displayed.
To make silent ringer sound, press
or press
shortly the volume key on the left side of the phone.
There are following ways to answer a call depending
on the setting of Answer Mode menu option (6-6).
See page 112.
Setting option
to answer...
By Send Key
Press
By Any Key
press any key except
or volume keys.
To end the call press
Note: You can answer a call while using the
Phonebook or menu features. The current
operation will be interrupted.
36
Viewing Missed Calls
If you fail to answer a call for any reason, the phone
indicates a missed call by displaying a text
notification on the screen. Additionally, if caller
information is available, a Missed entry is created,
and the screen displays the phone number of the
most recent missed call.
When the display informs you of the call you missed,
press
to call the displayed number, or
to
clear the message and return to Standby mode.
To view the list of the missed calls, refer to the
Missed menu option (1-1) on page 62.
37
Call Functions
Call Functions
Options During a Call
Call Waiting
Your phone provides a number of functions that you
can use during a call. As many options are network
services, you may not be able to use all of these
functions at all times.
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and if you have set the Call Waiting menu
option (1-7) to Enable. Contact your service provider
to activate Call Waiting.
Press
options:
during a call to access the following
Mute/Quit: allows you to switch your phone’s
microphone off, so that the other party cannot hear
you.
Example: You wish to say something to another
person in the room but do not want the other party to
hear you.
Calls: allows you to access the Calls menu. See
page 62.
When a waiting call is detected, the incoming call
alert sounds (network dependent) and a text
notification displays. To answer a waiting call:
1. To answer the call, press
automatically put on hold.
2. Press
. The first call is
again to switch between two parties.
Note: Depending on the network. Sometimes the
incoming call no. would be displayed by phone
is incorrect.
Phonebook: allows you to access the Phonebook
menu. See page 67.
Silent/Quit: does not send the key tones. It allows
you to press keys without hearing annoying key
tones during a call.
Send My #: sends DTMF (Dual-Tone MultiFrequency) tones of your phone number.
DTMF length: manipulates the audible DTMF (DualTone Multi-Frequency) tones. You can choose
between Normal and Long.
38
39
Call Functions
Entering Text
Call Forwarding
This feature provides the option of forwarding
incoming calls to another phone number, even while
your phone is off. Activating Call Forwarding does
not affect outgoing calls made from this phone.
Contact your service provider to activate Call
Forwarding. Refer to the Call Forward menu option
(1-6) on page 65.
You are provided with the following text input
modes;
Three-Way Calling
This feature enables you to conduct conference calls
with two separate parties at the same time. You are
billed airtime for each of the outgoing calls
separately. Contact your service provider to activate
Three-Way Calling.
During a three-way call, if one of the callers hangs
up, you and the remaining caller will stay connected.
If you initiated the call and you hang up first, all
three parties are disconnected.
1. During a conversation,
Enter the phone number for the third party, and
then press
2. When the third party answers, press
to begin your three-way call.
* The function depends on the network.
40
When using your phone, you will need to enter text
at many times. For example, when storing a name in
the Phonebook, writing a text message or scheduling
events in your calendar. You can enter alphanumeric
characters into your phone by using your phone’s
keypad.
again
• Pinyin: allows you to enter the Chinese character
using its Pinyin spelling, the phonetic system.
• Stroke: allows you to enter the Chinese character
using the individual strokes labeled on keys.
• T9 Word: allows you to enter the English
characters with only one keypress per character.
Note: The Pinyin, Stroke and Word mode use the T9
input method. T9 mode automatically
compares your key presses to an internal
linguistic database to determine the correct
word.
• ABC: allows you to enter English characters by
pressing the key labeled with the desired
character repeatedly until the character displays.
• Symbol/Symbol2: allows you to enter various
symbols and special characters.
• 123: allows you to enter numbers.
41
Entering Text
Entering Text
Changing Text Input Mode
Chinese Pinyin Mode
1. In text entry screen, press
Pinyin is a system to mark Chinese pronunciation in
Latin alphabets. With the Pinyin input method, you
can enter Chinese characters by keying in the Pinyin
string from the phone keypad and the phone
automatically presents the matching alternatives.
2. Scroll to the desired mode by pressing navigation
key.
3. To select the highlighted mode, press
This mode allows you to enter Pinyin characters with
only one key press per letter.
You can change between T9 Word and ABC mode
to enter English words and choose Pinyin or
Stroke to enter Chinese characters. To include a
symbol or number(s) between characters,
Symbol/Symbol2 and 123 modes are also
available.
Note: If you want to exit the Options screen
without changing to a new mode, press
Typing Characters in Pinyin Mode
4. You will find the selected text input mode indicator
at the display.
Name:
PINYIN ni
Mode
1. Press keys corresponding to the phonetic spelling,
referring to the Roman letters printed on the keys.
Notice that the choices in the Character Selection
Map change.
Example: Typing
in Pinyin mode
Name:
12
Text input mode
indicator
PINYIN ni
12
Press
and
to enter ‘ni’.
Mode
The Character Selection Map
42
43
Entering Text
Entering Text
2. If you cannot find the desired character from the
display, press up or down navigation key to scroll
through choices in the Character Selection Map.
When the character you are typing appears in the
Character Selection Map, you may select it.
If you want another Pinyin for the keys you have
pressed or assign the tone for the character refer
to the next chapter.
3. To select a character, press
to activate the
Character Selection Map. A number (1 to 6) is
added to the beginning of a corresponding
character. With the Character Selection Map being
activated, a normal press on
to
selects the corresponding character.
Name:
12
PINYIN ni
Using Alternative Pinyin and Tone
You can enter another character using alternative
Pinyin for the keys you have pressed or assigning a
tone for the selected Pinyin. Entering a tone for a
character is optional, but it is especially useful if the
Pinyin spelling is similar between characters.
To get alternative Pinyins or tones, proceed as
follows:
1. Press keys corresponding to the letter you need.
Press
to display another Pinyin and Tone
menu.
If you want just to assign a tone go to step 3.
For example, to get Pinyin “mi”, press
and
. But the screen shows another Pinyin “ni” by
pressing
and
Remember there are several Pinyins from the same
key pressing. To get alternative Pinyins, press
1 2 3 4 5 6
Mode
OK
Press
to select “ “with the Character
Selection Map being activated.
Name:
12
press
PINYIN ni
1: ni
2: mi
3: ng
1 2 3 4 5 6
Mode
OK
Notes:
• To insert a space when entering a text, press
• To remove the activate character in the Character
Selection Map, press
44
tones menu
Press
and
all Pinyins by pressing
and
45
Entering Text
Entering Text
2. Press the associated key to correspond to the
Pinyin you want.
For example, press
4. If you cannot find the desired character from the
display, press down navigation key to scroll
through choices in the Character Selection Map.
to select “mi”.
3. Press one of the keys to associated a tone.
for four tones,
for
light tone.
To exit without assigning a tone, press
For example, to enter a third tone for Pinyin “mi”,
press
. You can see the selected Pinyin and
the third tone sign “v”. You can get the character
sets for the Pinyin “mi” with the third tone.
Name:
1: ni
2: mi
3: ng
press for
the third tone
12
PINYIN mi
1 2 3 4 5 6
5. If you find the character you want to enter, press a
key (
to
) to corresponding the
character.
For example, press
to type “
“.
Notes:
• You may delete a previously entered tone by
pressing
• To exit the Tone menu without making a selection,
press
Scrolling
To move the cursor left or right through your text
message, press left or right navigation key.
Mode
Character sets for the Pinyin
“mi” with the third tone.
alternative Pinyin by
pressing
and
The sign to the third tone
Inserting a Space
Insert a space between the characters, press
Text Area.
in
Clearing Strokes and Characters
Press
one or more times to remove strokes to
the left. To clear all of the strokes and characters on
the display, press and hold
46
47
Entering Text
Entering Text
Chinese Stroke Mode
Typing Strokes and Characters in Stroke Mode
This mode allows you to enter individual Chinese
strokes, in written order - from top to bottom, and
from left to right.
1. To type a character, press keys corresponding to its
component strokes. Press keys on the handset in the
order that you would write the strokes, using one
press per desired stroke.
Even though there are many different strokes used to
create Chinese characters, the strokes are classified
into 5 basic categories; heng, shu, pie, dian and zhe.
The basic strokes are printed on the keypad, on keys
to
To enter a stroke, press the key printed with the
stroke that most closely represents the exact stroke
you desire. The table shows the stroke/key
relationship:
Example: Typing (
Name:
12
STROKE
7 8 9
) in Stroke mode
0 #
Key Stroke Area.
Press
to enter
then
to enter
Mode
The Character Selection Map.
To select , press
Categories
Keys
Strokes Represented in Each Category
2. The phone displays your strokes in the Key Stroke
Area and offers character choices in the Character
Selection Map. As you enter strokes, notice that
the choices in the Character Selection Map
change.
To scroll through choices in the Character Selection
Map, press the navigation key.
Note: If you are uncertain of the order of one or
more strokes, press
in place of each
questionable stroke. Continue entering strokes
until the character is displayed in the
Character Selection Map or until you have
finished the character.
48
49
Entering Text
3. When the character you are typing appears in the
Character Selection Map, you may select it
without finishing the stroke sequence for the
character. Characters displayed in the Character
Selection Map correspond to keys 7 to # on the
keypad. To select a character from the Character
Selection Map and add it to your message, press
the corresponding key
to
Scrolling
To move the cursor left or right through your text
message, press left or right navigation key.
Clearing Strokes and Characters
Press
one or more times to remove strokes to
the left. To clear all of the strokes and characters on
the display, press and hold
Entering Text
T9 Word Mode
To type a word, press keys corresponding to the
letters you need. Remember the following as you are
typing:
1. Press keys on the phone just once per desired
letter. For example, to enter ‘Hello’, press
2. The word you are typing appears in the display. It
may change with each key press.
3. Type to the end of the word before editing or
deleting any keystrokes.
If the word that appears in the display is not the
word that you desire, press
one or more
times to display alternate word choices for the
keys you have typed. (For example, ‘of’ and ‘me’
both shares the sequence
. The phone
displays the most commonly used choice first.)
To type words not found in the T9 Word mode,
change the text input mode to ABC mode.
4. Complete each word with a space by pressing
50
51
Entering Text
Entering Text
ABC Mode
Smart Punctuations
Period, hyphen, and apostrophe are available on
. T9 Word applies rules of grammar to insert the
correct punctuation. Notice that
is used twice
in this example to display two punctuation marks:
‘
Changing Case
To shift the case of the next letter(s) that you type,
press
. There are three shift states: Lower
Case(T9word), Initial Capital(T9Word) and Capitals
Lock(T9WORD).
Including a Number
When typing in ABC mode, you should press key
labeled with the required letter:
-Once for the first letter
-Twice for the second letter
-And so on.
For example, you press
three times quickly to
display the letter “C” ,
two times quickly to
display the letter “K”. So, this method is called
Multi-tap typing.
Refer to the table below for the list of characters
assigned on each key.
List of characters available:
Key
Characters in the Order Displayed
You can include a number between letters without
exiting the T9 Word mode. Press and hold the
desired number key.
. @ , : ? - ; ’ / ( ) ! # % & *
Scrolling
To move the cursor left or right through your text
message, press left or right navigation key.
Clearing Letters and Words
Press
one or more times to clear letters one by
one to the left. Press and hold
to erase all
letters on the display.
< > _ + = ” \ { } $ [ ] 1
(Caps Lock mode)
52
53
Entering Text
The cursor moves to the right when you press a
different key. When entering the same letter twice (or
a different letter on the same key), just wait for a few
seconds for the cursor to move right automatically,
and enter the next letter.
Changing Case
To shift the case of the next letter(s) that you type,
press
. There are three shift states: Lower
Case(abc), Initial Capital(Abc) and Capitals
Lock(ABC).
Entering Text
Symbol/Symbol2 Mode
Symbol/Symbol2 mode enables you enter symbols
into a text message.
Name:
SYMBOL
1234 56789
Mode
Including a Number
You can include a number between letters without
exiting the ABC mode. Press and hold the desired
number key.
Inserting a Space
Press
to insert a space between the words.
Name:
12
SYMBOL2
Mode
OK
Press left or right navigation key to display more
symbol sets.
Press keys corresponding to the desired mark, then
the phone automatically switches back to the text
entry mode used just prior to selecting Symbol mode.
123 Mode
Scrolling
To move the cursor left or right through your text
message, press left or right navigation key.
123 mode enables you to enter numbers into a text
message. Press keys corresponding to the desired
digits, and manually switch back to the text entry
mode of choice.
Clearing Letters and Words
Press
one or more times to clear letters one by
one to the left. Press and hold
to erase all
letters on the display.
54
55
Using the Menus
Using the Menus
The phone offers a range of functions that allows
you to tailor the phone to your needs. These
functions are arranged in menus and submenus.
The menus and submenus can be accessed by
scrolling or using the shortcuts.
Accessing a Menu Function by Scrolling
1. In Standby mode, press
menu facility.
to access the main
2. Scroll with the navigation keys to reach the
desired main menu, for example Setup. Press
to enter the menu.
3. Find the menu option you want, for example,
Sounds, by scrolling with up or down navigation
key. Press
to enter the menu option.
If the menu you have selected contains submenus,
repeat this step.
Accessing a Menu Function by Using its
Shortcut
The menu items (menu, submenus and setting
options) are numbered and can be accessed quickly
by using their shortcut numbers.
Note: The numbers assigned to each menu function
are indicated on the list on page 58.
1. In Standby mode, press
mode.
to access the menu
2. Enter the first digit of the shortcut number. Repeat
this for each digit of the shortcut number.
Example: Setting Voice Volume
Press
and
6 for Setup, 1 for Sounds, 5 for Voice Volume.
3. Find the setting of your choice by pressing up or
down navigation key , then press
4. Scroll with up or down navigation key to find the
setting of your choice.
5. Press
to confirm the chosen setting.
Notes:
• To return to the previous menu level, press
• You can exit the menu without changing the menu
settings by pressing
56
57
Using the Menus
List of Menu Functions
The list shows the menu structure available and
indicates the number assigned to each option.
1: Calls
1-1:
1-2:
1-3:
1-4:
Missed
Incoming
Outgoing
Erase Logs
1-4-1: Missed
1-4-2: Incoming
1-4-3: Outgoing
1-4-4: All Calls
1-5: Air Time
1-5-1: Last Call
1-5-2: Total
1-5-3: LifeTime
1-5-4: Erase Total
1-6: Call Forward
1-6-1: Busy
1-6-2: No Answer
1-6-3: Unconditional
1-6-4: Busy/No Answer
1-7: Call Waiting
2: Phonebook
2-1:
2-2:
2-3:
2-4:
58
Using the Menus
3: Message
3-1: New Message
3-2: Inbox
3-3: Outbox
3-4: Erase Msgs
3-4-1: Voice Notif.
3-4-2: Inbox Card
3-4-3: Inbox Phone
3-4-4: Outbox Card
3-4-5: Outbox Phone
3-4-6: All Messages
3-5: Msg Setup
3-5-1: Scroll Timer
3-5-2: Msg. Reminder
3-5-3: New Message
3-5-4: Canned Msg.
3-6: Web Alert
4: Scheduler
4-1:
4-2:
4-3:
4-4:
4-5:
4-6:
4-7:
4-8:
4-9:
View Month
Jump To Date
Alarm Set
Calculator
Today
To Do List
Memo Pad
Countdown
World Time
Find
Add
Group Set
My Phone #
59
Using the Menus
5: Games
5-1: Couple Bowling
5-2: Honey Ball
6: Setup
6-1: Sounds
6-1-1: Ringer Volume
6-1-1-1: Calls
6-1-1-2: Messages
6-1-1-3: Alarm/Scheduler
6-1-2: Ringer Type
6-1-2-1: Voice Calls
6-1-2-2: Messages
6-1-2-3: Alarm/Scheduler
6-1-3: Key Tone
6-1-3-1: Tone Volume
6-1-3-2: Tone Type
6-1-4: Alerts
6-1-4-1: Minute Beep
6-1-4-2: Service Area
6-1-4-3: Connect
6-1-4-4: Disconnect
6-1-4-5: Fade
6-1-4-6: Roam Area
6-1-5: Voice Volume
6-1-6: Power On/Off
6-2: Display
6-2-1: Animation
6-2-2: Banner
6-2-3: Backlight
6-2-4: Language
6-2-5: Set Time
6-2-5-1: Main Clock
6-2-5-2: Dual Clock
6-2-6: Contrast
6-2-7: Service LED
60
Using the Menus
6-3: Auto Key Lock
6-4: Auto Retry
6-5: Auto Answer
6-6: Answer Mode
6-7: Roam Option
6-8: Security
6-8-1: Lock Mode
6-8-2: Change Lock
6-8-3: Emergency #
6-8-4: Voice Privacy
6-8-5: Restriction
6-8-6: Clear Memory
6-8-7: Reset Phone
6-8-8: Card Setup
6-9: Entry Method
6-#: Data Option
7: U-Max
7-1: U-Info
7-2: UNI-INFO
In Use Menu
1: Mute/Quit
2: Calls
2-1: Missed
2-2: Incoming
2-3: Outgoing
2-4: Erase Logs
2-5: Air Time
3: Phone Book
3-1: Find
3-2: Add
3-3: Group Set
3-4: My Phone #
4: Silent/Quit
5: Send My #
6: DTMF Length
61
Calls
Incoming
Calls
You can use the Calls menu to:
• View and dial the last missed, outgoing or incoming
numbers.
• Erase the numbers in the call logs.
• View the duration of calls.
Missed
This option lets you view the last 20 calls received (if
you are subscribed to the caller ID service). When
you access this menu, the list of the incoming calls is
displayed.
For further information on scrolling through the list
and accessing a call log, see “Missed” on page 62.
Menu 1-1
If the caller identification is available (contact your
service provider), your phone keeps a list of 20
missed calls that you failed to answer. Contact your
serivce provider for availability.
1. Press up or down navigation key to find the
desired number (or name if saved in Phonebook).
2. Press
to select the highlighted number.
The dialed number (and name if stored in
Phonebook) is displayed.
3. While viewing the selected number, pressing
allows you to access the following options:
• Talk: dials the selected number.
• Save: allows you to save the number in the
Phonebook.
• Prepend: allows you to add an area code or
feature code to the number before calling the
number.
• Erase: delete the selected number.
If you want to place a call to the displayed phone
number, press
. To exit the call log, press
62
Menu 1-2
Outgoing
Menu 1-3
The phone stores up to 20 outgoing calls you dialed.
When you access this menu, the list of the outgoing
calls is displayed.
For further information on scrolling through the list
and accessing a call log, see “Missed” on page 62.
Erase Logs
Menu 1-4
You can erase the entries stored in each of the three
call logs or all three logs at once.
The following options are available:
Missed: The calls you missed are erased.
Incoming: The calls you received are erased.
Outgoing: The calls you made are erased.
All Calls: All calls you made, received and missed
are erased.
When a confirming message appears, Select Yes to
erase the logs. If you want to cancel the selection,
Select No.
63
Calls
Calls
Call Forward
Air Time
Menu 1-5
This option lets you view the timers for calls made
and received.
Menu 1-6
This network service enables incoming calls to be
forwarded to another number.
Note: This feature is not intended for billing purpose.
Note: This option is only available when your
network operator support it. Contact your
service provider for availability.
The following options are available:
The following options are available:
Last Call: shows the length of the last call.
Busy: calls are forwarded if you are already on the
phone.
Total: shows the number of all calls made to or from
your phone and the total duration of the calls since
the air time counter was last set to zero by using the
Erase Total option.
Life Time: shows the number and total duration of
all calls made to or from your phone since the phone
was shipped from the factory.
Erase Total: resets the call timers.
No Answer: calls are forwarded if you do not
answer the phone.
Unconditional: all of the calls are forwarded.
Busy/No Answer: calls are forwarded if you are
already on the phone or do not answer.
To Set your forwarding options:
1. Select the type of call forwarding.
2. Select Enable and press
3. Enter the area code and phone number to which
your calls should be forwarded.
4. Press
or
your network.
. The phone sends your setting to
To Deactivate the call forward setting:
1. Select the call forwarding option.
2. Select Disable and press
64
65
Calls
Call Waiting
Call waiting feature alerts you of incoming calls
while you are on a call.
To enable the feature, select Enable by using the
navigation key and press
To disable, select Disable and press
With the feature enabled, you can respond to an
incoming call by pressing
while you are on a
call. This puts the first caller on hold and answers
the second call.
To switch to the first caller, press
again.
Note: If you press
released.
Phonebook
Menu 1-7
, all of the calls are
You can store phone numbers and their
corresponding names in the memories of your UIM
card and the phone. You can store up to 500 entries
in phone’s memory. The UIM card capacity depends
on your card’s manufacturer. The UIM card and
phone memories, although physically separate, are
used as if they were a single entity, called the
Phonebook.
Find
Menu 2-1
This option allows you to find an entry by its name,
entry, group or storage.
Note: You can quickly access this menu by
pressing
when the phone is in Standby
mode.
To change the finding option, move to the first level
until it is highlighting by pressing up navigation key,
and then press left or right navigation key to scroll
through the options; By Name, By Entry, By Group
and By Storage.
By Name
1. Move to the text input area by pressing up or
down navigation key.
2. Press
. You can enter the first few letters
of the name. For more information on how to
enter characters, refer to page 41.
66
67
Phonebook
Phonebook
3. Press
Your phone shows the closest matching name.
4. Press the up or down navigation key to scroll the
entries. When an entry is highlighted,
• Press
• Press
options:
to place the call.
you can access the following
Edit: edits the phone number, name, location
number and so on.
Erase: erases the selected entry.
Add New: adds a number to the Phonebook.
For more information on how to add a number,
refer to page 70.
• Press
to select the entry. The entry
information is displayed. Move to each item by
pressing up or down navigation key. Press
and you can access one of the following
options:
• Press
• Press
to return to the previous screen.
to exit this menu.
By Entry
1. Enter the number you want to find. Associated
entries are displayed.
2. Follow step 4 of By Name page 68.
By Group
1. Move to the group selecting area by pressing up or
down navigation key.
2. Press left or right navigation key to scroll through
the options. Whenever you scroll them, associated
entries are displayed
3. Follow step 4 of By Name page 68.
Talk: dials the number.
Edit: edits the phone number, name, location
number and so on.
Copy: is only available when you select a
number item in phone memory entry or an item in
UIM card.
From UIM card to phone: Select a category icon
for labeling the phone number and press
From phone to UIM card: Press
Erase: erases the selected number.
68
69
Phonebook
Phonebook
By Storage
Creating a New Entry
1. Move to the Card or Phone option selecting area
by pressing up or down navigation key.
2. Press left or right navigation key to scroll through
the options. Whenever you scroll it, associated
entries are displayed.
3. Follow step 4 of By Name page 68.
Add
Menu 2-2
This menu allows you to add information to your
Phonebook.
When you select this menu, the screen prompts you
to select Number, E-mail or ETC. Use navigation
key to scroll and press
or the number which is
highlighted.
Number
You can store up to 500 entries. Each entry can
contain up to 32 digits with an associated name of
up to 14 characters in English or 6 characters in
Chinese.
Note: The storage capacity of the UIM card
varies depending on the UIM card.
70
1. Enter a phone number and press
2. Highlight the New Entry by pressing the up or
down navigation key. Press
to confrim.
3. Enter a desired name. You can enter up to 14
characters in English or 6 characters in Chinese.
For further information on how to enter text, see
page 41. When you are satisfied, press the
key.
4. Your phone shows the detail information. Highlight
the option you want to customize by using up or
down navigation key.
• Name: Enter the desired name after pressing
. You can enter up to 14 characters in
English or 6 characters in Chinese. For further
information on how to enter text, see page 41.
• Storage: Define where the entry is stored,
either Phone or Card, by pressing
If you select the Card, you can see the phone
number you have entered on step 1.
You can edit the number.
If you select the Phone, you can select a type
you want to save the phone number you have
entered on step 1.
• Location: The first available location displays.
If you need to enter the location number, use
the number keys or press navigation keys until
the location number you want to use appears.
71
Phonebook
The following options are available only when you
select phone:
• Type: Select the category of the number to be
stored using left or right navigation key. Home,
Office, Mobile, Pager and Fax are available.
• E-Mail1/E-Mail2: Enter a desired e-mail
address. For further information how to enter
text, see page 41.
• ETC: Press the Edit soft key to add a memo
about the person. For more information how to
enter text, see page 41.
• Speed Dial: Select the type you want to use
the number as a Speed dial item.
• Relation: Select one of the predefined relation
groups, where the entry is included. Grouping the
entries enables you to search for a number in the
desired group. See page 75.
• Ringtype: Select a unique ringer melody for the
entry. By selecting different tones, incoming
voice calls having a caller ID can be
distinguished from those not having.
Phonebook
Adding a Number into an Existing Entry
You can store up to 5 numbers per entry saved in the
phone’s memory by storing them in different
categories.
1. After the Add menu option (Menu 2-2), select
Number from the pop-up list and press
key.
2. Enter a number you want to save and press
key .
3. Press the up or down navigation key to select Find
and press
key.
4. Find the name to which you want to add the number
using the navigation keys and press
key.
5. Select a category by pressing the left or right
navigation key and press
key.
6. Follow from Step 4 in “Creating a New Entry.”
Note: If you have selected the label already used for
another number, the message asking if you
want to overwrite the number appears.
Press
and select a new one.
5. Repeat Step 4 until you complete the contact
information of entry.
6. Press
to save the entry.
After storing, the phone displays the memory
status of the Phonebook.
72
73
Phonebook
Phonebook
E-mail1/E-mail2
Creating a New Entry in Standby mode
This option allows you to store an e-mail address as a
Phonebook entry.
You can also save the number displayed in Standby
mode.
1. After the Add menu option (Menu 2-2), select
E-mail from the pop-up list and press
key.
1. Enter a phone number.
2. Enter the e-mail address up to 48 characters in
English and press
2. Press
, and then follow from step 3 of “Creating a
New Entry” on page 71.
Group Set
Menu 2-3
For further information on entering text, see page 41.
2. And then follow from step 2 of “Creating a New
Entry” on page 71.
This option allows you to change a group in your
Phonebook.
ETC
1. Press the up or down navigation key to locate the
group you are renaming.
You can make a memo about a person as a Phonebook
entry.
2. Press
1. After accessing the Add menu option (Menu 2-2),
select ETC from the pop-up list and press
key.
2. Enter a memo and press
key.
For more information about how to enter text, see
page 41.
3. Press
key to accept New Entry.
Note: To add the memo to an existing entry, select
Find. Find the name from the Phonebook list,
and press
key.
4. Enter a name and press
key.
5. Follow from Step 4 in “Creating a New Entry” on
page 71.
74
3. Press
to erase the old group name.
4. Enter a name.
For more information how to enter text, see page 41.
5. Press
to save the new name.
My Phone #
Menu 2-4
This option allows you to change your phone number.
This number is sent when you choose the
Send My # option during a call.
1. Press
to change it.
2. Enter a new phone number and press
75
Message
Message
New Message
Your phone can receive voicemail, text messages,
and pages. Also, your phone can send text messages
and pages if your system supplier provides this
service.
To quickly enter the Message menu, press left
navigation key in Standby mode.
When you receive a message the
icon is
displayed and you hear an alert depending on the
message sound setting.
Note: You can receive messages even when your
phone is in Lock mode.
To read the text message, press the
key.
To hear the voice message, press the
key.
The Inbox and Outbox share a given amount of
memory in your phone or UIM card. You can store up
to 30 messages in the phone memory. The UIM
card’s capacity depends on your UIM card.
Menu 3-1
You can create short text messages to send them to
other mobile numbers.
1. Enter the desired message content and press
You can enter up to 70 characters in Chinese or
160 characters in English. For further information on
how to enter text, see page 41.
2. Select one of the following options, and press
• Send & Save: allows you to save a copy of the
message and then send the message to the
required destination. You can read the message in
your Outbox.
• Send only: allows you to send the message. The
message will be deleted after sending.
• Save only: allows you to save the message so
that it can be sent later. You can read the
message in your Outbox.
When the message memory is full, an error message
is displayed. In this case, you can not receive any
new messages. You should delete old messages to
make room for the new message.
76
77
Message
Message
3. Enter the phone number, and press
Inbox
Menu 3-2
You can recall the phone number from your
Phonebook. Press
and select Phonebook to
recall a number from Phonebook or Phone # to
change the number.
The inbox stores messages that you received.
Note: You can enter other numbers by using the
down navigation key after entering a number.
You can send to 10 destinations at the same
time.
To listen the selected Voice mail, press
follow the instructions provided.
Voice
and
Txt Card/Txt Phone
An icon displayed in the message list represents the
status:
•
: displays when you have read a message.
•
: indicates when a duplicated message is
received.
•
: displays if a message is urgent.
Press up or down navigation key to scroll to one of
the messages in the list and press
. If necessary,
press up or down navigation key to scan through the
contents.
78
79
Message
Message
The following options are available when you press
The following options are available when you press
Reply: replies to the sender.
Resend: resends to the sender.
Forward: forwards the message to another number.
Call/Save: makes a call by pressing
number by pressing
or saves the
Call/Save: makes a call by pressing
number by pressing
or saves the
Erase: erases the message from Outbox.
Erase: erases the message from Inbox.
Note: For further information on how to edit or send
a message, see “New Message” on page 77.
Outbox
Note: For further information on how to edit or send
a message, see “New Message” on page 77.
Menu 3-3
The outbox stores messages that you have already
sent or just saved without sending.
Card/Phone
An icon displayed in the message list represents the
status:
•
: indicates that the message was successfully
delivered.
•
: indicates that the message was not sent.
Press up or down navigation key to scroll to one of
the messages in the list and press
. If necessary,
press up or down navigation key to scan through the
contents.
80
81
Message
Message
Erase Msgs
Menu 3-4
Msg Setup
Menu 3-5
Using this menu option, you can erase message.
The following options are available:
Using this menu, you can set up the various options
for message.
Voice Notif.: erases all of the voice messages.
Scroll Timer(Menu 3-5-1)
Inbox Card: erases all of the incoming messages
saved in the card’s memory.
You can set the screen to scroll automatically or not.
Inbox Phone: erases all of the incoming messages
saved in the phone’s memory.
Off: It does not scroll automatically. You needs scroll
to next screen manually using the up or down
navigation key.
Outbox Card: erases all of the outgoing messages
saved in the card’s memeory.
Outbox Phone: erases all of the outgoing messages
saved in the phone’s memory.
All Messages: erases all of the messages.
1~5 seconds: If an incoming message is too long
for the display, the phone displays it by scrolling the
screen automatically. You can set the time when the
phone scrolls to the next screen.
Msg. Reminder (Menu 3-5-2)
This option reminds you that you have had an
unchecked incoming message after you receive an
message.
Off: The phone doesn’t alerts after you receive an
incoming message.
Once: The phone alerts just once after you receive
an incoming message.
Every 2 min: The phone alerts every 2 minutes after
you receive an incoming message.
82
83
Message
Message
New Message (Menu 3-5-3)
You can set up the following options as default
setting when creating a new message.
Priority: allows you to set the priority level of
messages. You can toggle between Normal,
Interactive, Urgent or Emergency by pressing up
or down navigation key.
Web Alert
Menu 3-6
Your phone alerts you with incoming web messages.
When a new message is received, your phone will
display a text notification together with an audible
alert.
Delivery Ack: allows you to activate or deactivate
the delivery acknowledgement feature. When this is
activated, the network informs you whether your
message has been received or not by the recipient.
Select On to turn on the feature or Off to turn it off.
Canned Msg. (Menu 3-5-4)
Your phone has 11 preset messages to enable you to
use them when writing a new message. You can
change them, if necessary. You can also add up 9
messages.
1. Press up or down navigation key to highlight the
message you want to change. Press
To add a new message, select an empty location.
2. Clear the existing message using
, if
necessary, and enter a new message.
For further information on how to enter text, see
page 41.
3. Press
84
to save the message.
85
Scheduler
Scheduler
The following options are available when you
press
The Scheduler feature enables you to:
• View the Calendar.
• Keep track of important dates and events.
• Use the phone as a calculator.
• Create a list of things to do.
• Set the phone to ring at a specified time.
• Set and countdown D-Day.
• Check the time in another part of the world.
View: allows you to view the scheduled events of
the selected day.
Add new: allows you to add a new event on the
selected day.
Scheduling an Event
1. Select a day from the calendar and press
View Month
Menu 4-1
This option allows you to view the past or future
month as well as the current month in calendar
format.
The indicator style represents different status :
- red: current date has an event.
- blue: current date has no event.
- pink: this date has an event.
- striped blue: cursor.
Selecting a Day on the Calendar
• You can move to the next or the previous day by
pressing left or right navigation key.
• You can move up or down the Calendar by one
week by pressing up or down navigation key .
2. Enter your event information and press
accept your input.
to
You can enter up to 32 characters in English or 16
characters in Chinese. For further information on
how to enter text, see page 41.
3. Enter the Start time and date using the numeric
keys, and press down navigation key.
4. Enter the End time and date using the numeric
keys, and press down navigation key.
5. Select when an alarm will notify you of your event
by pressing left or right navigation key. If you
select No alarm, the phone does not ring an
alarm.
6. Press
to save your event.
• To display the next or previous month, use the
volume keys on the left side of the phone.
86
87
Scheduler
Scheduler
Alarm Set
Viewing Your Schedule
Days with scheduled events are highlighted on the
calendar when you access the View Month menu
option (Menu 4-1). Select one of them and press
. The first event displays.
Scroll to the event you want to view by pressing left
or right navigation key. If necessary, press down
navigation key to display more contents of the event.
While viewing an event, press
following options:
to use the
Menu 4-3
This option allows you to set the alarm to ring at a
specific time.
To set the alarm:
1. Select the alarm frequency option by pressing up
or down navigation key and press
• Once: the alarm rings only once and is then
deactivated.
• Daily: the alarm rings every day at the same
time.
• Off: the alarm is not used.
Add new: allows you to add a new event.
Edit: allows you to edit the event.
Erase: allows you to erase the selected event.
Erase All: allows you to erase all of the scheduled
events.
Jump To Date
Menu 4-2
This feature allows you to specify the date you want
to view so that you can easily go to the day without
scrolling through the Calendar. Once the date is
obtained, you can create, edit and delete events on
your calendar.
Enter the desired date using the numeric keys, and
press . When the day you selected is highlighted,
press
to access it.
88
To set the alarm when the phone’s power is off,
press
. Use the navigation keys to activate Yes,
and press
Note: If the battery is removed after setting the
alarm even when power off, the alarm will not
ring. Also the battery is too weak to reach the
alarm schedule, it would be fail to alarm.
2. Enter the required time when an alarm rings using
the numeric keys.
3. Press
to save the setting.
To stop the alarm when it rings, press any key.
To deactivate the alarm, select Off in the frequency
options and press
89
Scheduler
Scheduler
Calculator
Menu 4-4
Using this feature, you can use the phone as a
calculator. The calculator provides the basic
arithmetic functions: addition, subtraction,
multiplication and division.
To perform a calculation:
1. Enter the first number using the numeric keys.
2. Set the operator for your calculation by pressing
the navigation key you want to enter: + (add),
- (subtract), x (multiply), ÷ (divide).
3. Enter the second number.
4. To calculate the result, press
Note: Use
to enter a decimal point and
to
change the sign of a number to a negative(-)
or positive(+).
Today
Menu 4-5
You can schedule up to 9 events for the current day
indicating each event’s start and end time. You can
store up to 20 events totally. You can be alerted by
the Calendar function before an event is commenced.
Events scheduled for future dates automatically
appear on your Today events schedule for that
particular day.
For more detailed information about scheduling and
viewing events, refer to “View Month” on page 86.
To Do List
Menu 4-6
This feature allows you to enter a list of tasks you
need to do and assign both a priority and a deadline
to them. You can store up to 20 tasks.
Creating a To-Do Item
1. Enter a task and press
You can enter up to 32 characters in English or 16
characters in Chinese. For further information on
how to enter text, see page 41.
2. Select High or Low priority using left or right
navigation key .
3. Enter your deadline using the numeric keys.
4. Press
90
to store the task.
91
Scheduler
Scheduler
Adding, Editing and Erasing a To-Do Item
Memo Pad
If tasks are already defined in the To Do List when you
select the To Do List menu option (Menu 4-6), the
current contents display with the status mark and
priority; ★1 for high or ★2 for low priority.
This feature allows you to write down memos about
anything you need to remember. You can create up to
10 memos using this feature.
While viewing a task, the following options are
available when you press
Add new: allows you to add a new task.
Edit: allows you to edit the selected task.
Erase: allows you to erase the selected task.
Erase All: allows you to erase all of the tasks.
After you select an option, press
the screen prompt.
. Then follow
Menu 4-7
Writing a New Memo
1. Enter the memo contents.
You can enter up to 60 characters in English or 30
characters in Chinese for each memo.
For further details on how to enter text, see
page 41.
2. Press
to save the memo.
Viewing a Memo
The list of your memos displays when you access
this menu. To view details, press up or down
navigation key to scroll to the desired memo from the
list and press
While viewing a memo, the following options are
available when you press
Add New: allows you to add a new memo.
Edit: allows you to edit the selected memo.
Erase: allows you to erase a selected memo.
Erase All: allows you to erase all of the memos.
92
93
Scheduler
Scheduler
Countdown
Menu 4-8
This menu helps you know how much time it takes
you to do something, or how many months, days,
hours and minutes until a specific event occurs. You
can create up to 20 Countdown timers using this
feature.
The following options are available when you press
Add new: allows you to add a new item.
Edit: allows you to edit the selected item.
Erase: allows you to erase the selected item.
Erase All: allows you to erase all of the items.
Creating a Countdown Timer
1. Enter a name for your new Countdown timer and
press
You can enter up to 24 characters in English or 12
characters in Chinese. For further information on
entering text, see page 41.
2. Enter the date and time from which you want to
countdown from.
World Time
Menu 4-9
You can use this option to find out what time it is
and another part of the world.
Press left or right navigation key to scroll to the
desired time zone.
Note: You can enter between 1981 and 2099 for the
year.
3. Press
to save the item.
Adding, Editing and Erasing a Countdown
Timer
The list of the countdown timers is displayed when
you access the Countdown menu option (Menu 4-8).
If there is more than one item defined in this menu,
scroll to the desired item by pressing left or right
navigation key.
94
95
Games
Games
Couple Bowling
You can enjoy two games using your phone; Couple
Bowling and Honey Ball.
Scroll to the required game by pressing up or down
navigation key and press
to select it.
To select an option, press the corresponding numeric
key. The following options are available:
New Game: allows you to start a new game.
High Score: shows you the high score list.
Key Info: shows you which keys do what within the
game.
Continue: allows you to continue a previously
played game. The menu is only available when a
game has already been saved.
While you are playing a game:
To
pause/resume the game
exit the game
Press the
The goal of the game is to knock down a triangular
group of ten pins by rolling a ball.
When you start a new game, you can select the
required mode, character and ball by pressing
When the game starts, the screen shows the
character and ball. Move the character first, then
select the spin and direction, and finally set the
power of the ball.
Key Commands
To...
Then press...
Move left
or
Move right
or
Set the speed or spin
or throw the ball
or
Turn the sound on or off
Menu 5-1
At the end of the game, if your score is ranked fifth
or higher, you may enter a name of up to 10
characters.
96
97
Games
Honey Ball
Games
Menu 5-2
The goal of the game is to break honey blocks by
bouncing a ball between a bat and the honey blocks.
When you start a new game, the ball is sitting on
the bat in the middle of the screen. Once you start
the ball moving, you must position the bat, so that
the ball continues to bounce off it. Each time the ball
hits a honey block, the block breaks, sometimes
revealing letters that enhance the efficiency of the
bat or ball:
Key Commands
To...
Then press...
Slope up
Slope down
Move left
or
Move right
or
Hit the ball
or
B: the bat and ball change back to their standard
form.
C: the ball sticks to the bat each time it hits it,
giving you time to optimise your position.
H: the bat increases in length.
P: the ball is changed into a power ball, so that it
no longer bounces off the blocks. It goes straight
through them, destroying anything that it touches.
If you reach the final stage of the game, the rules
are slightly different. The honey blocks are much
stronger and need to be hit more than once before
they are destroyed. At the same time, small bees
attack the bat, damaging it a little each time until it
is destroyed and you lose a life.
98
99
Setup
Setup
Sounds
Menu 6-1
You can use the Sounds menu to customize various
sound settings, such as the:
• Ringer volume, type
• Key tone and voice volume
• Alert sounds
• The ringer which sounds when the phone is
switched on or off
Selecting Vibrate switches the phone to vibration
mode. An incoming call vibrates the phone.
Selecting 1 Beep sounds a beep.
Selecting Silent does not sound a ring.
Ringer Type (Menu 6-1-2)
This option allows you to set unique ringer melodies
for the following items:
Ringer Volume (Menu 6-1-1)
Voice Calls: allows you to select a ringer for
incoming voice calls.
This menu option allows you to adjust the ringer
volume.
Messages: allows you to select a ringer for
voicemail notifications, page, text messages and
web messages.
Calls: allows you to adjust the ringer volume for the
incoming calls.
Alarm/Scheduler: allows you to select a ringer for
an alarm/schedule alarm.
Messages: allows you to adjust the ringer volume
for incoming messages.
As you change the ringer melody, it sounds for a few
seconds.
Alarm/Scheduler: allows you to adjust the ringer
volume for an alarm.
Press up or down navigation key to adjust the
volume. You can also use the volume keys on the left
side of the phone.The graphic shows the volume
level; the more bars you see, the louder the volume.
100
101
Setup
Setup
Key Tone (Menu 6-1-3)
Alerts (Menu 6-1-4)
This option allows you to adjust the tone that the
keypad generates each time you press a key.
Your phone gives audible alerts (beeps) at a specified
time to inform you that certain things have
happened. The alerts only occur in your earpiece so
the other party does not hear them.
The following options are available:
Tone Volume: Press navigation key to adjust the
volume. You can also use the volume keys on the left
side of the phone.The graphic shows the volume
level; the more bars you see, the louder the volume.
Selecting Silent turns off the key tone.
Tone Type: select the type of the key tone.
Raindrop Sound, Drum Sound, Piano, Woman’s
Voice, Girl’s Voice and Beep are available.
The available alerts are:
Minute Beep: When this menu option is set to On,
the phone sounds an alert 10 seconds before each
elapsed minute to remind you of the length of the
current call.
Service Area: When this menu option is set to On,
the phone sounds an alert when you exit your service
area or when you return to the service area.
Connect: When this menu option is set to On, the
phone sounds a connect tone when your call is
connected to the system.
Disconnect: When this menu option is set to On,
the phone sounds a disconnect tone when a call is
disconnected.
Fade: When this menu option is set to On, the
phone sounds an alert when a dropped call occurs
during conversation in response to a signal fade.
Roam Area: When this menu option is set to On,
the phone sounds an alert when your phone starts
roaming.
102
103
Setup
Voice Volume (Menu 6-1-5)
This option enables you to adjust the voice volume of
the earpiece.
Press navigation key to adjust the volume. The
graphic shows the volume level; the more bars you
see, the louder the volume.
Note: During a call, you can adjust the volume using
the volume keys on the left side of the phone.
Setup
Display
Menu 6-2
The Display feature enables you to:
• Set the length of time for backlight.
• Create your own greeting, and select an
animation to be displayed in Standby mode or
when powered on or off.
• Set time and Select language.
• Adjust the screen contrast of LCD screens.
• Turn on or off the service LED
Animation (Menu 6-2-1)
Power On/Off (Menu 6-1-6)
This option allows you to turn on or off the sounds
that the phone generates when it is switched on and
off.
Press navigation key to select Power 1, Power 2 or
Power 3 to turn the sound on or Off to turn it off.
Your phone displays animated images in the standby
mode or when it is turned on or off.
The following options are available:
Opening: selects an image to be displayed when
you switch the phone on.
Closing: selects an image to be displayed when you
switch the phone off.
Wallpaper: selects an image to be displayed in the
standby mode.
104
105
Setup
Setup
Banner (Menu 6-2-2)
Backlight (Menu 6-2-3)
This option allows you to set a banner message to be
displayed at the bottom of the display in the standby
mode.
You have several options for setting how the LCD
backlight operates.
Remember that backlight use drains your battery
faster.
To change the banner:
1. If necessary, press the
key repeatedly to
delete each letter of the old greeting.
Press and hold the
key to clear off the old
greeting.
2. Enter your banner message up to 14 characters in
English or 7 characters in Chinese by using the
alphanumeric keys.
For further information how to enter letters, refer
to page 41.
The following options are available:
7/15/30/40 Seconds: the backlight comes on when
you press a key or receive a call and switches off
7/15/30/40 seconds after the last key is pressed.
Note: When the key lock is on, the backlight will not
be turned on despite of pressing keys
excepting for pressing
and holding side
keys.
Language (Menu 6-2-4)
3. When you finish entering the banner, press the
key to save it.
You can change the language of the menu display.
Select between English and Chinese by pressing
up or down navigation key.
106
107
Setup
Set Time (Menu 6-2-5)
This menu option allows you to set the current date
and time.
Main Clock
The current time, if set, displays. Enter the current
time and date using the numeric keys.
Note: It is not allowed to change the clock when you
are in service area.
The month, day, hour and minute must be each
entered using 2 digits. The year requires all four
digits. And you must enter the hour in 24-hour
format.
When you finish entering the time and date, press
the
key to save it.
If you enter unavailable time, the phone displays
‘Invalid time’ and prompts you to enter again.
Setup
Location: Move to left or right position using up or
down navigation key, and press left or right
navigation key to select the location.
Summer Time: Move to left or right position using
up or down navigation key, and press left or right
navigation key to select On or Off.
Contrast (Menu 6-2-6)
This menu allows you to adjust the brightness of the
Main LCD screens.
1. Press down or left navigation key to make the
screen darker, and up or right navigation key to
make the screen brighter.
You can also use the volume keys to adjust the
brightness.
Each time you press the key, you will see the
selected status of the LCD.
2. Press the
key to save your setting.
Dual Clock
This option allows you to set the dual clock for the
Wallpaper display (Menu 6-2-1-3).
Service LED (Menu 6-2-7)
You can turn on or off the service light on the phone.
To change the option, move to the first level until it
is highlighted using up or down navigation key, and
press left or right navigation key to scroll through the
options; Location and Summer Time.
108
109
Setup
Auto Key Lock
Setup
Menu 6-3
This function prevents that user pushes keys without
intention.
The following options are available:
After 15/30/60 Seconds: When the phone is in
standby mode, the Key Lock mode switches on
15/30/60 seconds after the last key is pressed.
When the alram occurs or the call is received, the
Key Lock mode is disabled.
Auto Retry
Menu 6-4
With this menu option activated, your phone
automatically dials the number when a connection
fails. Dependent upon your location, the number of
times that your phone automatically dials the number
may vary.
Auto Answer
Menu 6-5
This feature is only used when the earphone is
connected to the phone.
With this menu option activated, the phone
automatically answers calls after predefined rings.
This option is useful while driving, for instance.
To activate this feature, select how long your phone
waits before answering an incoming call. after 1
sec, after 3 sec and after 5 sec are available.
When this menu option is set to Off, the phone does
not answer an incoming call. If you do not answer
the call, it is stored in the Missed Call log (see page
62).
Note: This menu option can’t be activated if the
ring type is set to Vibrate, 1-Beep or Silent.
110
111
Setup
Answer Mode
Setup
Menu 6-6
This menu option allows you to select how to answer
an incoming call. It is preset to By Send Key.
Security
Menu 6-8
Your phone provides you with various security
options, including a user-programmable lock code
and special number features.
The following options are available:
By Send Key: The phone answers only when you
press
By Any Key: The phone answers when you press
any key except
or volume keys.
Roam Option
Menu 6-7
This menu option allows you to select roaming
ability.
The following options are available:
Home only: With this setting, you cannot roam. If
your home system is not available, your call will not
be connected and the No Service indicator
appears.
Automatic: Your phone automatically searches for
the first available service, according to the Preferred
Roaming List supplied by the service provider.
To access the Security menu, you must enter the 4digit lock code. It is preset to “0000” at the factory.
Lock Mode (Menu 6-8-1)
In the lock mode, you cannot dial numbers, except
for making an emergency call, or accessing menu
options.
The phone can receive incoming calls and messages
even though the phone is in the lock mode.
The following options are available:
Never: the phone remains unlocked.
On power up: the phone is automatically locked the
next time you turn the phone on.
Now: the phone is immediately locked.
To place an emergency call in the lock mode, enter
the number and then press
. The phone
recognizes the standard emergency numbers, such as
119, or three numbers programmed in the
Emergency # menu (Menu 6-8-3).
To unlock the phone, press
and enter the 4-digit
lock code. The phone is immediately unlocked.
112
113
Setup
Setup
Change Lock (Menu 6-8-2)
To store a emergency number:
This feature allows you to change your current lock
code to a new one. The lock code is preset to “0000”
at the factory.
1. Press up or down navigation key to select the
desired location and press
Enter a new, four-digit lock code and enter the code
once again at the prompt.
2. Press
to clear the existing number.
3. Enter the desired number and press
the number.
to save
Note: Your phone does not allow viewing of the lock
code for security reasons, so be sure to write
the lock code down or memorize if you have
changed.
Note: 119, 110 and 120 will remain emergency
number even if you edit them in the
emergency number list.
Emergency # (Menu 6-8-3)
To make an emergency call in the lock mode, simply
enter one of the programmed emergency numbers
and press
Your phone provides an option of storing three
emergency numbers. All of these numbers can be
manually dialed at any time, even if your phone is
locked or all outgoing calls are restricted.
IMPORTANT NOTICE!
A connection cannot always be guaranteed due to
the various transmission methods, network
parameters and user settings used to complete a call
from your wireless phone. Therefore, emergency
calling may not be available on all wireless networks
at all times.
DO NOT depend on this phone as a primary method
of dialing 119 or for any other essential or
emergency communications.
Voice Privacy (Menu 6-8-4)
Used only in digital networks, Voice Privacy encrypts
the voice channel so that people cannot eavesdrop
on your conversation.
The following options are available:
Standard: The phone uses a standard line for calls.
Enhanced: The phone makes and receives calls on
an encrypted high security line.
Note: This feature may not be available in all areas.
Contact your service provider for details and
availability.
Remember to always turn your phone on and check
for the adequate signal strength before placing a
call.
114
115
Setup
Setup
Restriction (Menu 6-8-5)
Reset Phone (Menu 6-8-7)
This feature allows you to restrict the use of your
phone.
Resetting the phone restores the default settings of
all user-selectable options.
The following opitons are avialable:
When a confirming message displays, select Yes and
press
to confirm. The phone reboots, turning
itself off and then on. Eventually it returns to the
standby mode.
Outgoing: restricts outgoing calls from your phone
except for emergency calls using the standard
emergency numbers, such as 119, 110 and 120, or
three numbers programmed in the Emergency #
menu (Menu 6-8-3). Once you have activated the
feature, storing a number is also unavailable.
Incoming: restricts incoming calls.
Note: The UIM card and phone memory cannot be
reset.
Or, select No or press
and exit this menu.
to cancel your selection
Phonebook: restricts to access the Phonebook.
Select Yes to turn this feature on or No turn it off.
Card Setup (Menu 6-8-8)
Clear Memory (Menu 6-8-6)
PIN Check (Menu 6-8-8-1)
This menu allows you to erase your Phonebook
entries in the card’s memory or in the phone’s
memory. You can also erase all of the entries at one
time.
When the PIN Check feature is enabled, you must
enter your PIN assigned to your UIM card each time
you switch the phone on. Consequently, any person
who does not have your PIN cannot use your phone
without your approval. However, SOS calls are
available without the PIN code.
The following opitons are avialable:
Card: clears the card’s memory.
Phone: clears the phone’s memory.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
All: clears all of the Phonebook entries at one time.
When a confirming message displays, select Yes to
clear the memory, or No to cancel your selection.
116
117
Setup
Setup
Change PIN (Menu 6-8-8-2)
Entry Method
This feature allows you to change your current PIN to
a new one, provided that the PIN Check feautre
(Menu 6-8-8-1) is enabled. You must enter the
current PIN before you can specify a new one.
This option allows you to select the default text
input mode.
UIM Lock (Menu 6-8-8-3)
Select one of the four modes; T9 Word, ABC,
Pinyin and Stroke by using up or down navigation
key and then press
When the UIM Lock feature is enable, your phone
only works with the current UIM card.
Once you have entered the lock code, you are asked
to confirm it by entering it again.
To unlock the UIM you must enter the UIM lock code.
Data Option
Menu 6-9
Menu 6-#
In this menu, you can select the network type you
prefer for data service.
If the network is not available with the current
setting, try again after changing the option.
To set your phone to automatically select a network
available, choose Auto Selection.
118
119
U-Max
U-Max
Launching the Web Browser
This menu is supplied by your service provider. The
contents available in each menu option may be
different depending on the service provider. For
further details, contact your service provider.
You can quickly access this menu by pressing the
key in the standby mode.
While using these feature, you can see the
commands on the bottom line of the display. The
function changes depending on where you are in the
connected application.
are used to execute the commands
indicated by the text above them.
U-Info
(Menu 7-1)
Your phone comes equipped with a web browser
which makes it possible for you to access the
Wireless Web.
Each time you start the browser, the phone will
connect to the Wireless Web and the service icon
( ) will appear on the display. Any time the icon is
visible on the display, you are connected to the
Wireless Web and will be billed accordingly. Rates
will vary according to your service plan.
120
Note: The first time you use the web browser, you
will go through a security setup process that
takes 3 to 5 minutes. Please follow the onscreen prompts to complete the security
setup process. This initial setup process
occurs only the first time you access the
service.
1. When you are connected to the network, the
home page or the last page you visited is
displayed.
The home page content when accessing the web
browser differ according to your Wireless Web
service provider.
2. To scroll through the screen, use
and
Exiting the Web Browser
To exit the Web Browser, simply press
time.
at any
UNI-INFO (Menu 7-2)
This menu is available only when you use a UIM UTK
card that provides additional services. For further
details, see your UIM UTK card instructions.
121
Health and Safety Information
Health and Safety
Information
Battery Safety
Information about Batteries
Time
Type
Standard Battery
• The battery can be charged and discharged
hundreds of times, but it will eventually wear out.
When the operation time for both talk mode and
standby mode is reduced by about half, it is time
to buy a new battery.
Precautions When Using Batteries
(900 mA)
Talk time
up to 160 minutes
Standby time
up to 65~200 hours
(fully charged battery)
* Criterion for Measuring Time:
The Talk time is measured with the +10dBm, Voice Rate Half.
Standby time will be reduced in the following
conditions:
• When you use the additional features on your
phone such as writing and storing messages,
playing games, connecting to the Internet, and so
on.
• If you are frequently out of the service area.
• If you are out of the service area for a long period
of time.
• If you use the phone out of the network’s local
service area.
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time
to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
• If you use the talk mode repeatedly.
122
123
Health and Safety Information
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-approved
chargers. When a charger is not in use, disconnect
it from the power source. Do not leave the battery
connected to a charger for more than a week,
since overcharging may shorten its life.
• Extreme temperature will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and lifetime of the battery.
Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
124
Health and Safety Information
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime.
But an important responsibility accompanies the
benefits of wireless phones, one that every user
must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of
a car, practice good common sense and remember
the following tips.
1. Get to know your wireless phone and its features,
such as speed dial and redial. If available, these
features help you to place your call without taking
your attention off the road.
2. When available, use a hands-free device. If
possible, add an extra layer of convenience and
safety to your wireless phone with one of the
many hands-free accessories available today.
3. Position your wireless phone within easy reach. Be
able to access your wireless phone without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your
voice mail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain,
sleet, snow, ice and even heavy traffic can be
hazardous.
125
Health and Safety Information
5. Do not take notes or look up phone numbers while
driving. Jotting down a To Do list or flipping through
your Phonebook takes your attention away from your
primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car
will be stationary. If you need to make a call while
moving, dial only a few numbers, check the road
and your mirrors, then continue.
7. Do not engage in stressful or emotional
conversations that may be distracting. Make the
people with whom you are talking aware that you
are driving and suspend conversations that have the
potential to divert your attention from the road.
8. Use your wireless phone to call for help. Dial the
emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it is a
free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. If you see a car accident, crime in
progress or other serious emergency where lives are
in danger, call the emergency number, as you would
want others to do for you.
10. Call roadside assistance or a special nonemergency wireless assistance number when
necessary. If you see a broken-down vehicle posing
no serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured, or a
vehicle you know to be stolen, call roadside
assistance or any other special non-emergency
wireless number.
126
Health and Safety Information
Operating Environment
Remember to follow any special regulations in force in
any area and always switch off your phone whenever
it is forbidden to use it, or when it may cause
interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation of
the equipment and for the safety of personnel, it is
recommended that the equipment should only be used
in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
Electronic Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against the
RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These
recommendations are consistent with the independent
research and recommendations of Wireless Technology
Research.
127
Health and Safety Information
Persons with pacemakers:
• Should always keep the phone more than 15 cm (6
inches) from their pacemaker when the phone is
switched on
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimise potential interference
If you have any reason to suspect that interference is
taking place, switch off your phone immediately.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such interference,
you may wish to consult your hearing aid
manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical devices,
consult the manufacturer of your device to determine
if it is adequately shielded from external RF energy.
Your physician may be able to assist you in obtaining
this information. Switch off your phone in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care
facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
128
Health and Safety Information
Posted Facilities
Switch off your phone in any facility where posted
notices require you to do so.
Potentially Explosive Atmospheres
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded
of the need to observe restrictions on the use of
radio equipment in fuel depots (fuel storage and
distribution areas), chemical plants or where blasting
operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
129
Health and Safety Information
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical emergencies,
for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
To make an emergency call, proceed as follows.
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 120 or any other official
emergency number). Emergency numbers vary by
location.
3. Press the
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular service
provider.
Health and Safety Information
Other Important Safety Information
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty installation
or service may be dangerous and may invalidate
any warranty applicable to the device.
• Check regularly that all wireless phone equipment
in your vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
• Switch off your phone before boarding an aircraft.
The use of wireless phones in aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the only
means of communication at the scene of an accident;
do not cut off the call until given permission to do so.
130
131
Health and Safety Information
Health and Safety Information
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Keep the phone and all its parts and accessories
out of the reach of small children’s.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals will corrode electronic
circuits.
• Do not touch the phone with a wet hand while it is
charging. Doing so may cause an electric shock to
you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas,
as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperature can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with
a soft cloth slightly dampened in a mild soap-andwater solution.
• Do not paint it. Paint can clog the device’s moving
parts and prevent proper operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
• Use only the supplied or an approved replacement
antenna. Unauthorised antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the phone,
which may damage the phone’s electronic circuit
boards.
132
133
Glossary
Glossary
Airtime - Actual time spent talking on the wireless
phone. Most carriers bill customers based
on how many minutes of airtime they use
each month.
Antenna - A device for transmitting or receiving
signals. The size and shape of antennas
is determined, in part, by the frequency of
the signal they receive. Wireless phones
and the base station must have antennas.
Base Station - The fixed radio transmitter/receiver
that maintains communications with
mobile radio telephones within a
given area. (Typically called a cell or
cell site)
CDMA - (Code Division Multiple Access) A spreadspectrum approach to digital transmission.
With CDMA, each conversion is digitized
and then tagged with a code. The mobile
phone deciphers only a particular code to
pick the right conversation off the air. The
transmitted signal is just above noise level
across the available bandwidth.
Channel - Communications signals transmit along
paths called channels.
Coder/Decoder - Compression & Decompression.
DTMF - (Dual-Tone Multi Frequency ) You send
DTMF signals when you enter numbers by
pressing the digit keys.
EVRC - (Enhanced Variable Rate Codec) EVRC is a
new global standard for compressing and
decompressing voice signals. EVRC uses a
lower bit rate (the number of bits sent per
second) than existing CDMA vocoders, while
providing significant improvements in voice
quality. This technology enables your phone
to provide superb voice quality while
benefiting from the ability to process more
cellular voice calls using less bandwidth than
the voice codecs in CDMA networks today.
Frequency - A measure based on time, as one or
more waves per second, in an electrical
or light wave information signal. A
signal’s frequency is stated in cyclesper-second or Hertz (Hz).
LCD - (Liquid Crystal Display) Commonly used to
refer to the screen display on the wireless
phone.
Prepend - The addition of a prefix, such as an area
code, to a phone number.
Deactivation - The process of rendering a wireless
phone inactive.
134
135
Glossary
RF - Radio Frequency
SCH-X659 Quick Reference Card
Phone number + Save +
Name + OK + + Type +
(set another items) + OK
Enter the location number and
hold down the last digit.
Location number + Press and
hold
INTERNAL PHONEBOOK
Phone number +
Store a new
number into
memory
BASIC OPERATION
Speed dial
- Card
Make a call
(in Standby mode)
„ / on the left side
- Phone
End a call
Adjust key tone
volume
(during a conversation)
„ / on the left side
Receive a call
Adjust voice
volume
136
key.
Wireless - Radio-based Systems that allow
transmission of telephone or data signals
through the air without a physical
connection, such as a metal wire
(copper) or fiber optic cable.
Scan memories Press
Vocoder - Voice Coder. A device used to convert
speech into digital signals.
twice
Talk Time - The length of time a person can talk on
a portable or transportable wireless
phone without recharging the battery.
(in Standby mode)
Press and hold #
Standby Time - The amount of time a fully charged
wireless portable or transportable
phone can be on and idle without
being in use. (See Talk Time)
Redial the last call
Service Charge - The amount paid each month to
receive wireless service.
Switch to silent
mode
Roaming - The ability to use a wireless phone to
make and receive calls in places outside
of the home service area.
Licensed by QUALCOMM Incorporated under one or more
of the following Patents.
U.S Patent No. 4,901,307 5,056,109 5,099,204
5,101,501 5,103,459 5,107,225
5,109,390
MENU TREE
1:
2:
3:
4:
5:
6:
7:
1:
2:
3:
4:
1:
2:
3:
4:
5:
6:
1:
2:
3:
4:
5:
6:
7:
8:
9:
1 : Calls
2 : Phonebook
3 : Message
4 : Scheduler
View Month
Jump To Date
Alarm Set
Calculator
Today
To Do List
Memo Pad
Countdown
World Time
New Message
Inbox
Outbox
Erase Msgs
Msg Setup
Web Alert
Find
Add
Group Set
My Phone #
Missed
Incoming
Outgoing
Erase Logs
Air Time
Call Forward
Call Waiting
Main Menu (To access, press
1:
2:
3:
4:
5:
6:
7:
8:
9:
#:
1 : U-Info
2 : UNI-INFO
6 : Setup
7 : U-Max
Sounds
Display
Auto Key Lock
Auto Retry
Auto Answer
Answer Mode
Roam Option
Security
Entry Method
Data Option
1 : Couple Bowling
2 : Honey Ball
5 : Games

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2003:10:27 11:35:26Z
Modify Date                     : 2004:04:27 10:37:27-03:00
Page Count                      : 70
Creation Date                   : 2003:10:27 11:35:26Z
Producer                        : Acrobat Distiller 4.0 for Macintosh
Mod Date                        : 2004:04:27 10:37:27-03:00
Metadata Date                   : 2004:04:27 10:37:27-03:00

EXIF Metadata provided by EXIF.tools