Samsung Electronics Co SCWR500 CELLULAR CDMA WLL TERMINAL User Manual fcc title

Samsung Electronics Co Ltd CELLULAR CDMA WLL TERMINAL fcc title

Contents

Users Manual

ELECTRONICSPrinted in KoreaCode No.: GH68-00237A’99/1 Rev 1 0(ENG)USER’S MANUALCDMAWIRELESS LOCAL LOOPTELEPHONESCW-R500/510CDMAWIRELESS LOCAL LOOPTELEPHONESCW-R500/510SCW-R500 1/9/99 12:06 PM Page b
Safety Precautions–––––––––––––––––––––––––––––2FCC NOTE––––––––––––––––––––––––––––––––––––3Checking Parts––––––––––––––––––––––––––––––––4Terminal Information –––––––––––––––––––––––––––5Setting Up Your Terminal –––––––––––––––––––––––6Basic OperationMaking Calls–––––––––––––––––––––––––––––12Receiving Calls–––––––––––––––––––––––––––12Advanced FeaturesAdjusting Volume –––––––––––––––––––––––––14Terminal Reset –––––––––––––––––––––––––––14Restricting use of the phone–––––––––––––––––15Setting Warning Beeps–––––––––––––––––––––15Changing the Lock Code––––––––––––––––––––16Optional FeaturesCall Waiting –––––––––––––––––––––––––––––18Three-Way Calling ––––––––––––––––––––––––18Call Forwarding–––––––––––––––––––––––––––18Caller ID ––––––––––––––––––––––––––––––––18Voice Mail Service ––––––––––––––––––––––––18MiscellaneousMenu Options Table –––––––––––––––––––––––20Troubleshooting ––––––––––––––––––––––––––22Specifications––––––––––––––––––––––––––––23TABLE OF CONTENTSFEATURESDescriptionThe Fixed Wireless Terminal(FWT)s are next generationtelecommunication terminals that provide the economic efficiency ofwireless and integrated service of wireline.Samsung SCW-R500 & SCW-R510 terminals connect traditional wiredtelephones to a wireless base station which delivers the call to the publictelephone network, instead of direct wired connection the network.Due to its wireless characters : the user can easily install the terminal andcan relocate it anywhere within the serviced local area. It is especially veryconvenient to use in areas where the wired telephone installation isdifficult. The terminals will offer you with such clear digital voice quality andvarious network service features that you will not know the difference witha conventional telephone.The terminal was designed to either be used on a desk or attached to thewall.1Incoming Call Light2Received SignalStrength Indicator3Adjusting Volume4External PowerSupply(optional)SCW-R500 1/9/99 12:06 PM Page d
FCC NOTESAFETY PRECAUTIONS1Avoid places where there are dust, gas or fire.2Do not shake, hit or impact the phone.3If you wish to cleanse the outside of the terminal, use only a soft,dry cloth. Such chemicals as alcohol, benzine or acetone can dam-age the surface of the terminal.4Do not twist or pull the cord out of the terminal.5Do not disassemble the FWT as you please.6DO NOT use the power adaptor if:• The power cord is damaged.• The terminal has been dropped or damaged in any way.7Use only the SAMSUNG provided adaptor. Do not use the SAMSUNG adaptor for any other usage.8Use only the SAMSUNG provided antenna. Do not use the antennafor any other usage.9Do not install the terminal near water, for example, near a bath tub,sink, wet basement, or swimming pool.10 Do not allow children to play with any radio equipment containing a transmitter. Children could hurt themselves or others (by poking themselves or others in the eye with the antenna. for example). Children could also damage the FWT.NOTE : The input voltage and the shape of the plug on this terminalmay vary from country to country.This device complies with part 15 of the FCC rules.Operation is subject to the following two conditions:1) The device may not cause harmful interference.2) This device must accept any interference received,including interference that may cause undesiredoperation. Privacy of communication may not beensured when using this phone.SCW-R500 1/9/99 12:06 PM Page 2
Once you have unpacked your consumer package, check to make sure thatyou have all the parts shown below. If any piece is missing or broken, please call your dealer.FWT Terminal AntennaAC AdaptorUser's Manual, Quick Reference CardWall Mountable Bracket External Power Supply(Optional)Wall Mounting Screws and CapsTERMINAL INFORMATIONAntennaAntenna Connector RJ-11 Phone PortPowerConnectorCHECKING PARTS1 42 53 61 42 53 6Wall Mountable Bracket.Wall Mounting Screws and Caps OptionVoice mail LEDRSSI LEDANTConnectorPower LEDRS-232CConnectorSCW-R500/510Quick Reference CardELECTRONUSER’S MANUALCDMAWIRELESS LOCAL LOOPTELEPHONESCW-R500/510CDMAWIRELESS LOCAL LOOPTELEPHONESCW-R500/510ELECTROELECTRONSCW-R500 1/9/99 12:06 PM Page 4
This FWT SCW-R500/R510 operates by receiving electricity from an electricaloutlet or external power supply.1Connect the terminal mounted Antenna on the side of the terminal.2Connect a conventional wired telephone to a RJ-11 phone port.(SCW-R500: 3 RJ-11 phone ports / SCW-R510: 2 RJ-11 phone port)Use the telephone compatible to FCC part 68 as possible, otherwise itmay not work properly.FWT works only tone dialing.3Plug the AC adaptor output into the rear DC 9V jack of the Terminal.4Plug the AC adaptor plug into an appropriate electrical outlet.5Connect a G3 analog facsimile machine to a dedicated RJ-11 port.(only for SCW-R510)✐ The usage of RS-232C connector on the base of the FWT is not user but dealer's maintenance.How to install External Power Supply(option)1Connect the DC power cable to External power supply.2Connect the DC power cable to FWT.3Connect the AC power connector to External power supply.4Plug the AC power connector to wall outlet.5Connect a wired telephone to a RJ-11 phone portSetting up your terminalSETTING UP YOUR TERMINAL1245312453SCW-R500 1/9/99 12:06 PM Page 6
Screws and Caps are provided for mounting the unit on a wall.Screws and Caps are recommended for most wall surface.For wooden wall installations, only the screws are required.1 Mark four mounting hole locations on the wall.2 Drill four holes at the marked location.3 If not using Caps, drill four holes in the wood. If using Caps, drill four holes at the marked location.Insert the Caps into the holes and tap the Cap heads flush against the wall.4 Remove wall mountable bracket cover from wall mountable bracket.5 Attach the wall mountable bracket.6 Tighten the screws firmly.7 Put a cover to wall mountable bracket.8Plug in the RJ-11 Phone Port and Power Connector and route the cords in agroove.9Screw the antenna into antenna connector.10Install the FWT onto the wall mountable bracket hook.Setting up your terminalSetting up your terminalFWT Wall Mount InstallationWall mounting Caps(4)Wall mountable bracketScrews(4)Wall mountable bracket hookWall mountable bracket CoverWallSCW-R500 1/9/99 12:06 PM Page 8
Making CallsReceiving CallsBasic OperationSetting up your terminalLED indications are described in the following table:Sound indications are described in following table:LED Color Condition MeaningPower – Off No Power is being supplied the terminal.RED On Normal operation.RED On No service condition. In this case, contact your dealer.RSSI ORANGE On Voice through the line is not clear but a call is available.Blinking Incoming callGREEN On Best service condition.Blinking Incoming call–Off Normal operation without any voice mailVoice message.Mail You have voice mail message.GREEN On Contact your service provider to activateMessage Service.TypeNormal dial toneNo Service toneOutgoing call restriction toneVoice mail toneCondition20sec on; 300msec off1.5sec on;800 msec off800 msec on; 200 msec offthree times (100msecon;100msec off)MeaningThe FWT is in-service withadequate receive signal.FWT is not capable ofmaking or receiving calls.FWT is not capable ofmaking calls but is capable of receiving calls.You have voice mail message.SCW-R500 1/9/99 12:06 PM Page 10
Adjusting VolumeTerminal ResetRestricting Use of the PhoneSetting Warning BeepsChanging the Lock Code• To disconnect when you’re through, replace the handset.NOTE: • Be sure the phone’s ringer is enabled.• If you heard incoming call in picking up the handset, you can receivethe call by pressing any digit key.1First, check to see that your FWT Phone is turned on. If the Power LED is lit, that means the power is on.2Pick up the handset.●You hear a dial tone.3Using the number keypad, dial the desired telephone number.✐ When you finish inputting phone number, you have to press button.If you don't press button, A call is not connected.4When the other person answers, begin your conversation.5To end the call, replace the handset.NOTE: • You can dial by 32 digit including .• You can dial emergency call by pressing and holding withoutinputting any digits.You can't change the emergency call number.MAKING CALLSThe terminal signals the telephone(s) to ring when an incoming call isdetected. Pick up the telephone handset and begin talking into themicrophone on the handset.RECEIVING CALLSAdvanced FeatureSCW-R500 1/9/99 12:06 PM Page 12
um-0OPER9WXYZ1Pick up the handset.2Press and .3Press .4Press .5Enter 4 digits Lock Code Number.(The default lock code is preset to 0000 at the factory.)NOTE: If the code is correct, it sounds confirmation beep. If not, it returns to the stand by mode with error beep.6set outgoing call restrict.release outgoing call restrict.1Pick up the handset.2Press and .3Press .4(up) or (down).NOTE: This feature is automatically set after 3 seconds.You will hear confirmation beep.1Pick up the handset.2Press and .3Press .4set 1-Minute Alert.cancel 1-Minute Alert.RESTRICTING USE OF THE PHONE1Pick up the handset.2Press and .3Press .4Press .5Enter 4 digits Lock Code Number.(The default lock code is preset to 0000 at the factory.)NOTE : If the code is correct, it sounds confirmation beep. If not, it returns to the stand by mode with error beep.6Press .ADJUSTING VOLUMETERMINAL RESETYou can control the sound volume on your phone. Used when you wish to block outgoing calls from being made, but stillwish to receive incoming calls at any time. This feature can be disabledand enabled through simple keypad number code entry.Resets the terminal back to the initial service status of factory pre-programmed state. This feature can be disabled and enabled throughsimple keypad number code entry.5JKL4GHI3DEFSETTING WARNING BEEPSA discrete tone is generated after each minute interval into the callconversation to notify you that a minute has passed since the beginning ofthe call or after the previous time of discrete tone, regardless of when you make or receive a call.1SCW-R500 1/9/99 12:06 PM Page 14
• Call Waiting• Three-Way Calling• Call Forwarding• Caller ID• Voice Mail Service1Pick up the handset.2Press and .3Press .4Press .5Enter 4 digits Lock Code Number.(The default lock code is preset to 0000 at the factory.)NOTE: If the code is correct, it sounds confirmation beep. If the code is incorrect, it returns to the standby mode with errorbeep.6Enter 4 digits new Lock Code Number.It sounds confirmation beep.7Enter 4 digits new Lock Code Number again.If it is different from the new Lock code you entered in the beginning, itreturns to the standby mode with error beep.8Press to store new Lock Code.If you press another key, it returns to the standby mode with error beep.NOTE: If it is correct, it sounds confirmation beep.CHANGING THE LOCK CODEUsed when you wish to change the lock code of the terminal. The programmed lock code prevents the terminal from being operationalto any other people without your permission. This feature can be disabledand enabled through simple keypad number code entry.When you first buy the phone, the lock number is 0000.2ABCOptional FeaturesSCW-R500 1/9/99 12:06 PM Page 16
Call WaitingCall Waiting is a feature which enables you to be alerted to a secondincoming call while you are on the first call of your telephone. You havethe option of responding to the second call while putting the first call onhold or you can disable the Call Waiting option during a particular call.Contact your service provider to activate or deactivate Call Waiting.Three-Way CallingThree-Way Calling is a feature that enables you to set up a three-wayconversation with two other different-numbered users. Contact your service provider to activate or deactivate Three-Way Calling.Call ForwardingCall Forwarding is a feature that enables you to forward all your incom-ing calls to another phone number, even if your telephone is turned off.You can still make calls from your telephone even when Call Forwardingis activated. Contact your service provider to activate or deactivate CallForwarding.Caller IDCaller ID is a feature which notifies you who is calling by displaying thecaller's number on the telephone's LCD when an incoming call comethrough with a ring. This feature is available only with a telephone thathas an LCD display on it. Contact your service provider to activate ordeactivate Caller ID.Voice Mail ServiceVoice Mail Service is a feature that allows the terminal to receive voicemail and forward it to your telephone when you press a certainsequence of keypad number. Contact your service provider to activateor deactivate Voice Mail Service.OPTIONAL FEATURESMenu Options TableTroubleshootingSpecificationsMiscellaneousSCW-R500 1/9/99 12:06 PM Page 18
SetreleaseNew lockcode4 digits inputNew lockcode4 digits inputDecides whether alertbeep should sound at oneminute intervals when youmake or receive a call.Used when you changethe lock code of thephone.Used when you limit use ofthe outgoing calls.Return phone to factorysettings.Adjusts the Volume ofphone.MENU OPTIONS TABLE* The lock code is preset to 0000 at the factory.I II III IV V VI VIIExplanation2ABC3DEF4GHI5JKL11. Setting warning beeps2. Changing thelock code3. Restricting outgoing call4. Terminal Reset5. AdjustingVolumeSetreleaseLock code4 digits inputLock code4 digits inputLock code4 digits inputWait3 secondsupdown,,,,,SCW-R500 1/9/99 12:06 PM Page 20
TROUBLESHOOTING•Troubleshoot the conventional wired telephoneIn the event you are unable to place or receive telephone calls, first be surethat the connetion wire is properly connected to the RJ-11 phone port on theterminal and to the RJ-11 port of the telephone. If unsure whether or not thetelephone is operational, connect a telephone which is known to beoperational to the terminal.If service is available with the operational telephone, replace or repair yourtelephone equipment. If service is still not available, then follow instructionsunder "Troubleshoot the Fixed Wireless Terminal".•Troubleshoot the Fixed Wireless TerminalCheck for the appropriate power indication on the LED. If no power, checkthe Adaptor(or External Power Supply)connection between the electricaloutlet and the terminal. Check for the appropriate Received Signal StrengthIndication(RSSI), Power, and Message Indication through the designatedLED, respectively.SPECIFICATIONSFrequency Range Tx : 825-849 MHzRx : 870-894 MHzChannel Bandwith CDMA 1.25 MHzMulti Connection Supports 5 RENRJ-11 Phone Port SCW-R500 : 3SCW-R510 : 2RJ-11 Analog Fax Port SCW-R510 : 1Power Supply DC 9V 1.2ATemperature of operation -20°C~ +50°CRelative humidity 5% ~ +95%Temperature of storage -25°C ~ +75°CDimension 200x170x48.5 (mm)7.9x6.7x1.9 (in.)Weight 495g / 1.1 lb.(without external adaptor)SCW-R500 1/9/99 12:06 PM Page 22

Navigation menu