Samsung Electronics Co SCX3405W Mono Laser Printer User Manual Egmont F english

Download:
Mirror Download [FCC.gov]
Document ID	1556063
Application ID	DUWc7ROAZN1NlQr7XBmjZw==
Document Description	Users Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	193.17kB (2414592 bits)
Date Submitted	2011-10-06 00:00:00
Date Available	2011-10-06 00:00:00
Creation Date	2017-11-03 22:29:26
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-11-03 22:29:26
Document Title	Egmont_F_english.book
Document Creator	FrameMaker 8.0
Document Author:	sk1004.lee

Installing driver over the network
Setting up the printer
On some UNIX OS, for example on Solaris 10, just added printers may not be
enabled and/or may not accept jobs. In this case run the following two
commands on the root terminal:
“accept ”
“enable ”
Uninstalling the printer driver package
The utility should be used to delete the printer installed in the system.
a Run “uninstallprinter” command from the terminal.
It will open the Uninstall Printer Wizard.
The installed printers are listed in the drop-down list.
b Select the printer to be deleted.
c Click Delete to delete the printer from the system.
d Execute the “. /install –d” command to uninstall the whole package.
e To verify removal results, execute the “. /install –c” command.
To add the printer to your UNIX system, run ‘installprinter’ from the command
line. This will bring up the Add Printer Wizard window. Setup the printer in this
window according to the following steps:
Type the name of the printer.
Specify any printer description in the Description field. This is optional.
Queue type shows the connection as lpd or jetdirect in the
corresponding list box. Additionally, usb type is available on Sun Solaris
OS.
To re-install it, use the command “. /install” to reinstall the binaries.
10
Select the appropriate printer model from the model list.
Enter any description corresponding to the type of the printer in the
Type field. This is optional.
Specify the printer location in the Location field.
Type the IP address or DNS name of the printer in the Device textbox for
network-connected printers. On IBM AIX with jetdirect Queue type,
only the DNS name is possible-numeric IP address is not allowed.
Select Copies to set the number of copies.
Check the Collate option to receive copies already sorted.
Check the Reverse Order option to receive copies in the reverse order.
2. Using a Network-Connected Machine
151
Installing driver over the network
11
12
Check the Make Default option to set this printer as default.
Click OK to add the printer.
2. Using a Network-Connected Machine
152
IPv6 configuration
IPv6 is supported properly only in Windows Vista or higher.
If the machine does not work in the network environment, activate IPv6.
Refer to the next section followed by.
• Some features and optional goods may not be available depending on
model or country (see "Features by models" on page 7 or "Menu
overview" on page 33).
• If the IPv6 network seems to not be working, set all the network setting
to the factory defaults and try again using Clear Setting.
In the IPv6 network environment, follow the next procedure to use the IPv6
address.
10
From the control panel
Connect your machine to the network with a network cable.
Select Start > Control Panel > Printers and Faxes.
The Add Printer Wizard window appears. Follow the instructions in the
window.
Activating IPv6
Press the
(Menu) button on the control panel.
Press Network > TCP/IP (IPv6) > IPv6 Activate.
Select On and press OK.
Turn the machine off and turn it on again.
Reinstall your printer driver.
Turn on the machine.
Print a Network Configuration Report that will check IPv6 addresses
(see "Printing a network configuration report" on page 141).
Click Add a printer in the left pane of the Printers and Faxes windows.
Click Add a local printer in the Add Printer windows.
2. Using a Network-Connected Machine
153
IPv6 configuration
Setting IPv6 addresses
11
From the SyncThru™ Web Service
The machine supports the following IPv6 addresses for network printing and
managements.
•
Link-local Address: Self-configured local IPv6 address (Address starts with
FE80).
•
Stateless Address: Automatically configured IPv6 address by a network
router.
•
Stateful Address: IPv6 address configured by a DHCPv6 server.
•
Manual Address: Manually configured IPv6 address by a user.
DHCPv6 address configuration (Stateful)
For models that do not have the display screen on the control panel, you
need to access SyncThru™ Web Service first using the IPv4 address and
follow the below procedure to use IPv6.
Access a web browser, such as Internet Explorer, from Windows.GEnter
the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and
press the Enter key or click Go.
If it’s your first time logging into SyncThru™ Web Service you need to
log-in as an administrator. Type in the below default ID and password.
If you have a DHCPv6 server on your network, you can set one of the following
options for default dynamic host configuration.
Press the
•
ID: admin
•
Password: sec00000
(Menu) button on the control panel.
Press Network > TCP/IP (IPv6) > DHCPv6 Config.
When the SyncThru™ Web Service window opens, move the mouse
cursor over the Settings of the top menu bar and then click Network
Settings.
Click TCP/IPv6 on the left pane of the website.
Press OK to select the required value you want.
•
DHCPv6 Addr.: Always use DHCPv6 regardless of router request.
•
DHCPv6 Off: Never use DHCPv6 regardless of router request.
•
Router: Use DHCPv6 only when requested by a router.
Check the IPv6 Protocol check box to activate IPv6.
Check the Manual Address check box. Then, the Address/Prefix text
box is activated.
2. Using a Network-Connected Machine
154
IPv6 configuration
Enter the rest of the address (e.g.,:3FFE:10:88:194::AAAA. “A” is the
hexadecimal 0 through 9, A through F).
Choose the DHCPv6 configuration.
Click the Apply button.
Using SyncThru™ Web Service
Start a web browser, such as Internet Explorer, that supports IPv6
addressing as a URL.
Select one of the IPv6 addresses (Link-local Address, Stateless
Address, Stateful Address, Manual Address) from Network
Configuration Report (see "Printing a network configuration report" on
page 141).
Enter the IPv6 addresses (e.g.,: http://[FE80::215:99FF:FE66:7701]).
Address must be enclosed in '[ ]' brackets.
2. Using a Network-Connected Machine
155
Wireless network setup
• Make sure your machine supports wireless networking. Wireless
networking may not be available depending on the model (see "Features
by models" on page 7).
• If the IPv6 network seems to not be working, set all the network settings
to the factory defaults and try again using Clear Setting.
Wireless network name and network key
Wireless networks require higher security, so when an access point is first set up,
a network name (SSID), the type of security used, and a Network Key are created
for the network. Ask your network administrator about this information before
proceeding with the machine installation.
12
Getting started
Understanding your network type
Typically, you can only have one connection between your computer and the
machine at a time.
Infrastructure mode
This is an environment generally used for homes and SOHOs
(Small Office/ Home Office). This mode uses an access point to
communicate with the wireless machine.
Ad hoc mode
This mode does not use an access point. The wireless
computer and wireless machine communicate directly.
2. Using a Network-Connected Machine
156
Wireless network setup
13
Introducing wireless set up methods
You can set wireless settings either from the machine or the computer. Choose the setting method from the below table.
Some wireless network installation types may not be available depending on the model or country.
Set up method
From the machine’s
control panel
Connecting method
Using the WPS (recommended)
Description & Reference
• See "Machines with a display screen" on page 160.
• See "Machines without a display screen" on page 161.
Using the menu button
• See "Using the menu button" on page 162.
2. Using a Network-Connected Machine
157
Wireless network setup
Set up method
Connecting method
Access point via USB cable (recommended)
From the computer
Ad hoc via USB cable
Other set up methods
• Windows user, see "Access point via USB cable" on page 163.
• Macintosh user, see "Access point via USB cable" on page 172.
Access point via WPS button (without a USB cable
connection)
Description & Reference
• Windows user, see "Access point via WPS button (without a USB cable connection)"
on page 167.
• Macintosh user, see "Setting the access point using the WPS button" on page 176.
• Windows user, see "Ad hoc via USB cable" on page 169.
• Macintosh user, see "Ad hoc via USB cable" on page 178.
Using a network cable
• See "Using a network cable" on page 180.
Setting the Wi-Fi Direct for mobile printing
• See "Setting up Wi-Fi Direct" on page 183.
If problems occur during wireless set up or driver installation, refer to the troubleshooting chapter (see "Troubleshooting" on page 185).
2. Using a Network-Connected Machine
158
Wireless network setup
Choosing your type
14
Using the WPS button
There are two methods available to connect your machine to a wireless network
If your machine and an access point (or wireless router) support Wi-Fi Protected
Setup™ (WPS), you can easily configure the wireless network settings by
pressing the
(WPS) button on the control panel without a computer.
• If you want to use the wireless network using the infrastructure mode,
make sure that the network cable is disconnected from the machine.
Using the WPS (PBC) button or entering the PIN from the computer to
connect to the access point (or wireless router) varies depending on the
access point (or wireless router) you are using. Refer to the user's guide
of the access point (or wireless router) you are using.
• When using the WPS button to set the wireless network, security settings
may change. To prevent this, lock the WPS option for the current wireless
security settings. The option name may differ depending on the access
point (or wireless router) you are using.
using the
(WPS) button on the control panel.
The Push Button Configuration (PBC) method allows you to connect your
machine to a wireless network by pressing both the
(WPS) button on the
control panel of your machine and the WPS (PBC) button on a Wi-Fi Protected
Setup™ WPS-enabled access point (or wireless router) respectively.
The Personal Identification Number (PIN) method helps you connect your
machine to a wireless network by entering the supplied PIN information on a WiFi Protected Setup™ WPS-enabled access point (or wireless router).
Factory default in your machine is PBC mode, which is recommended for a
typical wireless network environment.
You can change the WPS mode in control panel (
Wireless > OK > WPS Setting).
(Menu) > NetworkG>G
Items to prepare
•
Check if the access point (or wireless router) supports Wi-Fi Protected
Setup™ (WPS).
•
Check if your machine supports Wi-Fi Protected Setup™ (WPS).
•
Networked computer (PIN mode only)
2. Using a Network-Connected Machine
159
Wireless network setup
Machines with a display screen
Connecting in PBC mode
Press and hold the
2 seconds.
(WPS) button on the control panel for more than
The machine starts waiting for up to two minutes until you press the WPS
(PBC) button on the access point (or wireless router).
Connecting in PIN mode
Press and hold the
2 seconds.
(WPS) button on the control panel for more than
The eight-digit PIN appears on the display.
You need to enter the eight-digit PIN within two minutes on the
computer that is connected to the access point (or wireless router).
The messages are displayed on the display screen in the order below:
Press the WPS (PBC) button on the access point (or wireless router).
a Connecting: The machine is connecting to the wireless network.
The messages are displayed on the display screen in the order below:
b Connected: When the machine is successfully connected to the
wireless network, the WPS LED light stays on.
a Connecting: The machine is connecting to the access point (or
wireless router).
b Connected: When the machine is successfully connected to the
wireless network, the WPS LED light stays on.
c SSID Type: After completing the wireless network connection
process, the AP’s SSID information is displayed on the LCD display.
c AP SSID: After completing the wireless network connection process,
the AP’s SSID information appears on the display.
2. Using a Network-Connected Machine
160
Wireless network setup
Machines without a display screen
Connecting in PBC mode
Press and hold the
(WPS) button on the control panel for about 2 - 4
seconds until the status LED blinks quickly.
The machine starts connecting to the wireless network. The LED blinks
slowly for up to two minutes until you press the PBC button on the
access point (or wireless router).
You need to enter the eight-digit PIN within two minutes on the
computer that is connected to the access point (or wireless router).
The LED blinks slowly for up to two minutes until you enter the eightdigit PIN.
The WPS LED blinks in the order below:
a The light blinks fast on the WPS LED. The machine is connecting to
the access point (or wireless router).
b When the machine is successfully connected to the wireless
network, the WPS LED light stays on.
Press the WPS (PBC) button on the access point (or wireless router).
a The light blinks fast on the WPS LED. The machine is connecting to
the access point (or wireless router).
b When the machine is successfully connected to the wireless
network, the WPS LED light stays on.
Re-connecting to a network
When the wireless function is off, the machine automatically tries to re-connect
to the access point (or wireless router) with the previously used wireless
connection settings and address.
Connecting in PIN mode
The network configuration report, including PIN, must be printed (see
"Printing a network configuration report" on page 141).
In ready mode, press and hold the
(Cancel or Stop/Clear) button on
the control panel for about 5 seconds. You can find your machine’s PIN.
In the following cases, the machine automatically re-connects to the
wireless network:
• The machine is turned off and on again.
• The access point (or wireless router) is turned off and on again.
Press and hold the
(WPS) button on the control panel for more than
4 seconds until the status LED stays on.
The machine starts connecting to the access point (or wireless router).
2. Using a Network-Connected Machine
161
Wireless network setup
Canceling the connection process
15
Using the menu button
To cancel the wireless network connection when the machine is connecting to
the wireless network, press and release the
(Cancel or Stop/Clear) on the
control panel. You need to wait 2 minutes to re-connect to the wireless
network.
Disconnecting from a network
To disconnect the wireless network connection, press the
the control panel for more than two seconds.
•
•
(WPS) button on
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
Before starting, you will need to know the network name (SSID) of your wireless
network and the network key if it is encrypted. This information was set when
the access point (or wireless router) was installed. If you do not know about your
wireless environment, please ask the person who set up your network.
When the Wi-Fi network is in idle mode: The machine is immediately
disconnected from the wireless network and the WPS LED turns off.
After completing the wireless network connection, you need to install a
machine driver to print from an application (see "Installing driver over the
network" on page 144).
When the Wi-Fi network is being used: While the machine waits until the
current job is finished, the light blinks fast on the WPS LED. Then, the
wireless network connection is automatically disconnected and the WPS
LED turns off.
Press the
(Menu) button on the control panel.
Press Network > Wireless > WLAN Settings.
2. Using a Network-Connected Machine
162
Wireless network setup
Press the OK to select the setup method you want.
•
A machine installed with a wireless network interface
•
•
USB cable
•
Wizard (recommended): In this mode, the setup is automatic. The
machine will display a list of available networks from which to
choose. After a network is chosen then printer will prompt for the
corresponding security key.
Custom: In this mode, users can give or edit manually their own SSID
, or choose the security option in detail.
16
Setup using Windows
Shortcut to the Wireless Setting program without the CD: If you have
installed the printer driver once, you can access the Wireless Setting
program without the CD. From the Start menu, select Programs or All
Programs > Samsung Printers > your printer driver name > Wireless
Setting Program.
Creating the infrastructure network
Check whether the USB cable is connected to the machine.
The software searches the wireless network.
Turn on your computer, access point, and machine.
Insert the supplied software CD into your CD-ROM drive.
Select the Wireless Setting and Installation option.
Read the License Agreement, and select I accept the terms of the
License Agreement. Then, click Next.
If the software has failed to search the network, check if the USB cable is
connected properly between the computer and machine, and follow the
instructions in the window.
Access point via USB cable
Items to prepare
•
Access point
•
Network-connected computer
•
Software CD that was provided with your machine
2. Using a Network-Connected Machine
163
Wireless network setup
• If wireless network set up has been set before, the Wireless Network
Setting Information window appears.
If you want to reset the wireless settings, check the check box and click
Next.
Select the method to use from the wireless set up method window.
• For models that support the WPS button (without a USB cable
connection), the window shown below will appear.
Configure the wireless settings manually.: Go to step 8.
•
Configure the wireless settings by pressing the WPS button on
the access point.: Connect to the wireless network by press the WPS
button on the access point (or wireless router).
- With a USB Cable: Connect the USB cable and click Next, then go to
step 7.
- Using the WPS button: See "Access point via WPS button (without a
USB cable connection)" on page 167.
•
Follow the instructions in the window. When you are done
configuring the wireless network settings, go to step 11.
After searching, the window shows the wireless network devices. Select
the name (SSID) of the access point you are using and click Next.
2. Using a Network-Connected Machine
164
Wireless network setup
If you cannot find the network name you want to choose, or if you want to
set the wireless configuration manually, click Advanced Setting.
The wireless network security window appears when the access point has
security settings.
• Enter the wireless Network Name: Enter the SSID of the access point
(SSID is case-sensitive).
The wireless network security window appears. The window may differ
according to its security mode: WEP or WPA.
• Operation Mode: Select Infrastructure.
• WEP
Select Open System or Shared Key for authentication and enter the
WEP security key. Click Next.
WEP (Wired Equivalent Privacy) is a security protocol preventing
unauthorized access to your wireless network. WEP encrypts the data
portion of each packet exchanged on a wireless network using a 64-bit
or 128-bit WEP encryption key.
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may
not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key
can access the network.
WPA Personal or WPA2 Personal: Select this option to authenticate the
print server based on a WPA Pre-Shared Key. This uses a shared secret key
(generally called Pre Shared Key pass phrase), which is manually
configured on the access point and each of its clients.
• Encryption: Select the encryption (None, WEP64, WEP128, TKIP, AES,
TKIP AES).
• Network Key: Enter the encryption network key value.
• WPA
Enter the WPA shared key and click Next.
WPA authorizes and identifies users based on a secret key that changes
automatically at regular intervals. WPA also uses TKIP (Temporal Key
Integrity Protocol) and AES (Advanced Encryption Standard) for data
encryption.
• Confirm Network Key: Confirm the encryption network key value.
• WEP Key Index: If you are using WEP Encryption, select the appropriate
WEP Key Index.
2. Using a Network-Connected Machine
165
Wireless network setup
The window shows the wireless network settings and checks if the
settings are correct. Click Next.
•
For the Static method
When the window that tells you that the network cable connection is
confirmed appears, disconnect the network cable and click Next.
If the network cable is connected, it may have trouble finding the
machine when configuring the wireless network.
For the DHCP method
If the IP address assignment method is DHCP, check if DHCP is shown
in the window. If it shows Static, click Change TCP/IP to change the
assignment method to DHCP.
•
10
11
Wireless network setting is completed. To print from a Wi-Fi Direct
supported mobile device, set the Wi-Fi Direct Option (see "Setting up WiFi Direct" on page 183).
If the IP address assignment method is Static, check if Static is shown
in the window. If it shows DHCP, click Change TCP/IP to enter the IP
address and other network configuration values for the machine.
Before entering the IP address for the machine, you must know the
computer’s network configuration information. If the computer is
set to DHCP, you must contact the network administrator to get the
static IP address.
For example,
If the computer’s network information is as shown below,
IP address: 169.254.133.42
Subnet Mask: 255.255.0.0
Then, the machine’s network information should be as follows:
IP address: 169.254.133.43
Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)
Gateway: 169.254.133.1
Wi-Fi Direct Option:
• Wi-Fi Direct option appears on the screen only if your printer supports
this feature.
• Can start to build Wi-Fi Direct by using Samsung Easy Printer Manager
(see "Setting up Wi-Fi Direct" on page 183).
2. Using a Network-Connected Machine
166
Wireless network setup
• Network Name(SSID): The default Network Name is the model name
and the maximum length is 22 characters (not including "Direct-xx-").
• Network Key is the numeric string, and the size is 8 ~ 64 characters.
12
When the wireless network set up is completed, disconnect the USB
cable between the computer and machine. Click Next.
Access point via WPS button (without a USB cable
connection)
For models that have a WPS button, you can set the wireless network using the
WPS button (without a USB connection) and access point (or a router) WPS
button.
Items to prepare
13
14
15
Click Next when the Confirm Printer Connection window appears.
16
After installation is finished, a window asking you to print a test page
appears. If you want to print a test page, click Print a test page.
Select the components to be installed. Click Next.
After selecting the components, you can also change the machine name,
set the machine to be shared on the network, set the machine as the
default machine, and change the port name of each machine. Click Next.
Otherwise, just click Next and go to step 18.
17
If the test page prints out correctly, click Yes.
If not, click No to reprint it.
18
If you want to register your machine with the Samusng web site and
receive useful information, click On-line Registration. If not, click
Finish.
•
Access point (or wireless router)
•
Network-connected computer
•
Software CD that was provided with your machine
•
The machine installed with a wireless network interface
Creating the infrastructure network
Turn on your computer, access point, and machine.
Insert the supplied software CD into your CD-ROM drive.
Select the Wireless Setting and Installation option.
Read the License Agreement, and select I accept the terms of the
License Agreement. Then, click Next.
2. Using a Network-Connected Machine
167
Wireless network setup
Select Using the WPS button and click Next.
Follow the instructions on the window to set up the wireless network.
•
For models with a display screen, follow the steps below.
a Press and hold the
about 2-4 seconds.
(WPS) button on the control panel for
The machine waits up to 2 minutes for the WPS button on the
access point (or a router) to be pressed.
b Press the WPS (PBC) button on the access point (or wireless
router).
The messages are displayed on the display screen in the order
below:
• For models that support WPS button, the above window appears.
• If your machine is connected with a USB cable, the above window does
not appear. Disconnect the USB cable if you want to set up the wireless
network using the WPS button.
Connecting: The machine is connecting to the access point
(or wireless router).
Connected: When the machine is successfully connected to
the wireless network, the WPS LED light stays on.
• If you want to set up the wireless network using the USB cable, refer to
"Access point via USB cable" on page 163.
The next window asks you to check if your access point (or wireless
router) supports WPS or not.
If the access point (or wireless router) has a WPS button, select Yes and
click Next.
2. Using a Network-Connected Machine
168
Wireless network setup
•
SSID Type: After completing the wireless network
connection process, the AP’s SSID information appears on
the display.
12
After the installation is finished, a window asking you to print a test page
appears. If you want to print a test page, click Print a test page.
Otherwise, just click Next and go to step 14.
For models without a display screen, follow the steps below.
13
a Press and hold the
(WPS) button on the control panel for
about 2 - 4 seconds until the status LED blinks quickly.
If the test page prints out correctly, click Yes.
If not, click No to reprint it.
The machine starts connecting to the wireless network. The LED
blinks slowly for up to two minutes until you press the PBC
button on the access point (or wireless router).
14
If you want to register your machine with the Samusng web site and
receive useful information, click On-line Registration. If not, click
Finish.
b Press the WPS (PBC) button on the access point (or wireless
router).
10
11
The light blinks fast on the WPS LED while it is connecting to
the access point (or wireless router).
When the machine is successfully connected to the wireless
network, the WPS LED light stays on.
Ad hoc via USB cable
If you do not have an access point (AP), you may still connect the machine
wirelessly to your computer by setting up an ad-hoc wireless network by
following the simple steps below.
The Wireless Network Setting Complete window appears. Click Next.
Items to prepare
Click Next when the Confirm Printer Connection window appears.
•
Network-connected computer
Select the components to be installed. Click Next.
•
Software CD that was provided with your machine
After selecting the components, you can also change the machine name,
set the machine to be shared on the network, set the machine as the
default machine, and change the port name of each machine. Click Next.
•
A machine installed with a wireless network interface
•
USB cable
2. Using a Network-Connected Machine
169
Wireless network setup
Creating the ad hoc network in Windows
Check whether the USB cable is connected to the machine.
If you want to change the ad hoc settings, click the Advanced Setting
button.
Turn on your computer and the wireless network machine.
• Enter the wireless Network Name: Enter the SSID name you want (SSID
is case-sensitive).
• Operation Mode: Select ad hoc.
Insert the supplied software CD into your CD-ROM drive.
• Channel: Select the channel. (Auto Setting or 2412 MHz to 2467 MHz).
Select the Wireless Setting and Installation option.
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may
not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key
can access the network.
Read the License Agreement, and select I accept the terms of the
License Agreement. Then, click Next.
The software searches the wireless network.
• Encryption: Select the encryption (None, WEP64, WEP128).
• Network Key: Enter the encryption network key value.
• Confirm Network Key: Confirm the encryption network key value.
If the software has failed to search the network, check if the USB cable is
connected properly between the computer and machine, and follow the
instructions in the window.
• WEP Key Index: If you are using WEP Encryption, select the appropriate
WEP Key Index.
The wireless network security window appears when the ad hoc network
has security enabled.
After searching the wireless networks, a list of wireless networks your
machine has searched appears.
Select Open System or Shared Key for the authentication and click Next.
• WEP (Wired Equivalent Privacy) is a security protocol preventing
unauthorized access to your wireless network. WEP encrypts the data
portion of each packet exchanged on a wireless network using a 64-bit
or 128-bit WEP encryption key.
If you want to use the Samsung default ad hoc setting, select the last
wireless network on the list, Network Name(SSID) is Portthru and
Signal is Printer Self Network.
Then, click Next.
If you want to use other ad hoc settings, select another wireless network
from the list.
The window showing the wireless network setting appears. Check the
settings and click Next.
2. Using a Network-Connected Machine
170
Wireless network setup
Before entering the IP address for the machine, you must know the
computer’s network configuration information. If the computer’s network
configuration is set to DHCP, the wireless network setting should also be
DHCP. Likewise, if the computer’s network configuration is set to Static, the
wireless network setting should also be Static.
10
• For the Static method
If the IP address assignment method is Static, check if Static is shown in
the Wireless Network Setting Confirm window. If it shows DHCP, click
Change TCP/IP to enter the IP address and other network configuration
values for the machine.
For example,
If the computer’s network information is as shown follows:
- IP address: 169.254.133.42
When the wireless network settings are completed, disconnect the USB
cable between the computer and machine. Click Next.
If the Change PC Network Setting window appears, follow the steps in the
window.
If your computer is set to DHCP and you want to use the Static wireless
network setting, you must contact the network administrator to get the
static IP address.
• For the DHCP method
If the IP address assignment method is DHCP, check if DHCP is shown in
the Wireless Network Setting Confirm window. If it shows Static, click
Change TCP/IP to change the assignment method to Receive IP
address automatically (DHCP).
The Wireless Network Setting Complete window appears. Click Next.
Click Next if you are finished with the computer’s wireless network settings.
If you set the computer’s wireless network to DHCP, it will take several
minutes to receive the IP address.
11
12
13
Click Next when the Confirm Printer Connection window appears.
14
After the installation is finished, a window asking you to print a test page
appears. If you want to print a test page, click Print a test page.
- Subnet Mask: 255.255.0.0
Then, the machine’s network information should be as below:
Select the components to be installed. Click Next.
After selecting the components, you can also change the machine name,
set the machine to be shared on the network, set the machine as the
default machine, and change the port name of each machine. Click Next.
Otherwise, just click Next and go to step 16.
- IP address: 169.254.133.43
- Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)
- Gateway: 169.254.133.1
15
If the test page prints out correctly, click Yes.
If not, click No to reprint it.
2. Using a Network-Connected Machine
171
Wireless network setup
16
If you want to register your machine with the Samusng web site and
receive useful information, click On-line Registration. If not, click
Finish.
17
Setup using Macintosh
Items to prepare
•
Access point
•
Network-connected computer
•
Software CD that was provided with your machine
•
A machine installed with a wireless network interface
•
USB cable
10
11
Double-click the MAC_Installer folder > Installer OS X icon.
Click Continue.
Read the license agreement and click Continue.
Click Agree to agree to the license agreement.
When the message that warns that all applications will close on your
computer appears, click Continue.
Click Wireless Network Setting button on the User Options Pane.
The software searches the wireless network.
If the software has failed to search the network, check if the USB cable is
connected properly between the computer and machine, and follow the
instructions in the window.
Access point via USB cable
Check whether the USB cable is connected to the machine.
Turn on your computer, access point, and machine.
Insert the supplied software CD into your CD-ROM drive.
Double-click the CD-ROM icon that appears on your Macintosh desktop.
2. Using a Network-Connected Machine
172
Wireless network setup
• If wireless network setting has been set before, Wireless Network
Setting Information window appears.
If you want to reset the wireless settings, check the check box and click
Next.
12
Select the method to use from the wireless set up method window.
• For models that support the WPS button (without a USB cable
connection), the window shown below will appear.
Configure the wireless settings manually.: Go to step 13.
•
Configure the wireless settings by pressing the WPS button on
the access point.: Connect to the wireless network by press the WPS
button on the access point (or a wireless router).
- With a USB Cable: Connect the USB cable and click Next, then go to
step 7.
- Using the WPS Button: See "Access point via WPS button (without a
USB cable connection)" on page 167.
•
13
Follow the instructions in the window. When you are done
setting the wireless network settings, go to step 16.
After searching, the window shows the wireless network devices. Select
the name (SSID) of the access point you are using and click Next.
When you set the wireless configuration manually, click Advanced Setting.
• Enter the wireless Network Name: Enter the SSID of the access point
(SSID is case-sensitive).
• Operation Mode: Select Infrastructure.
2. Using a Network-Connected Machine
173
Wireless network setup
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may
not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key
can access the network.
WPA Personal or WPA2 Personal: Select this option to authenticate the
print server based on the WPA Pre-Shared Key. This uses a shared secret
key (generally called Pre Shared Key pass phrase) that is manually
configured on the access point and each of its clients.
• Encryption: Select the encryption. (None, WEP64, WEP128, TKIP, AES,
TKIP, AES)
• Network Key: Enter the encryption network key value.
• Confirm Network Key: Confirm the encryption network key value.
• WEP Key Index: If you are using WEP Encryption, select the appropriate
WEP Key Index.
The wireless network security window appears when the access point has
security enabled.
The wireless network security window appears. The window may differ
according to its security mode: WEP or WPA.
• WEP
Select Open System or Shared Key for the authentication and enter the
WEP security key. Click Next.
WEP (Wired Equivalent Privacy) is a security protocol preventing
unauthorized access to your wireless network. WEP encrypts the data
portion of each packet exchanged on a wireless network using a 64-bit
or 128-bit WEP encryption key.
• WPA
Enter the WPA shared key and click Next.
WPA authorizes and identifies users based on a secret key that changes
automatically at regular intervals. WPA also uses TKIP (Temporal Key
Integrity Protocol) and AES (Advanced Encryption Standard) for data
encryption.
2. Using a Network-Connected Machine
174
Wireless network setup
14
The window shows the wireless network settings and check if settings
are right. Click Next.
•
For the Static method
When the window that tells you that the network cable connection is
confirmed appears, disconnect the network cable and click Next.
If the network cable is connected, it may have trouble finding the
machine when configuring the wireless network.
For the DHCP method
If the IP address assignment method is DHCP, check if DHCP is shown
in the window. If it shows Static, click Change TCP/IP to change the
assignment method to DHCP.
•
15
16
Wireless network setting is completed. To print from a Wi-Fi Direct
supported mobile device, set the Wi-Fi Direct Option (see "Setting up WiFi Direct" on page 183).
If the IP address assignment method is Static, check if Static is shown
in the window. If it shows DHCP, click Change TCP/IP to enter the IP
address and other network configuration values for the machine.
Before entering the IP address for the machine, you must know the
computer’s network configuration information. If the computer is
set to DHCP, you must contact the network administrator to get the
static IP address.
For example:
If the computer’s network information is shown as follows:
IP address: 169.254.133.42
Subnet Mask: 255.255.0.0
Then, the machine’s network information should be as shown
below:
IP address: 169.254.133.43
Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)
Gateway: 169.254.133.1
Wi-Fi Direct Option:
• Wi-Fi Direct Option appears on the screen only if your printer supports
this feature.
• Can start to build Wi-Fi Direct by using Samsung Easy Printer Manager
(see "Setting up Wi-Fi Direct" on page 183).
2. Using a Network-Connected Machine
175
Wireless network setup
• Network Name(SSID): The default Network Name is the model name
and the maximum length is 22 characters (not including "Direct-xx-").
• Network Key is the numeric string, and the size is 8 ~ 64 characters.
•
Software CD that was provided with your machine
•
A machine installed with a wireless network interface
Creating the infrastructure network
17
18
When the wireless network settings are completed, disconnect the USB
cable between the computer and machine.
Wireless network set up is completed. After the installation is finished,
click Quit.
After completing the wireless network connection, you need to install a
machine driver to print from an application (see "Installation for Macintosh"
on page 134).
Setting the access point using the WPS button
For models that have a WPS button, you can set the wireless network using the
WPS button (without a USB connection) and access point (or a router) WPS
button.
Turn on your computer, access point, and machine.
Click the Wireless Network Setting button on the User Options Pane.
Insert the supplied software CD into your CD-ROM drive.
Double-click the CD-ROM icon that appears on your Macintosh desktop.
Double-click the MAC_Installer folder > Installer OS X icon.
Click Continue.
Read the license agreement and click Continue.
Click Agree to agree to the license agreement.
When the message that warns that all applications will close on your
computer appears, click Continue.
Items to prepare
•
Access point (or wireless router)
•
Network-connected computer
2. Using a Network-Connected Machine
176
Wireless network setup
10
Select Using the WPS button and click Next.
12
Follow the instructions in the window to set up the wireless network.
•
For models with a display screen, follow the steps below:
a Press and hold the
about 2-4 seconds.
(WPS) button on the control panel for
The machine waits up to 2 minutes for the WPS button on the
access point (or a router) to be pressed.
b Press the WPS (PBC) button on the access point (or wireless
router).
The messages are displayed on the display screen in the order
below:
• For models that support the WPS button, the above window appears.
• If your machine is connected with a USB cable, the above window does
not appear. Disconnect the USB cable if you want to set up the wireless
network using the WPS button.
Connecting: The machine is connecting to the access point
(or wireless router).
Connected: When the machine is successfully connected to
the wireless network, the WPS LED light stays on.
• If you want to set up the wireless network using the USB cable, refer to
"Access point via USB cable" on page 172.
11
The next window asks you to check if your access point (or wireless
router) supports WPS or not.
If the access point (or wireless router) has a WPS button, select Yes and
click Next.
2. Using a Network-Connected Machine
177
Wireless network setup
•
SSID Type: After completing the wireless network
connection process, the AP’s SSID information appears on
the display.
For models without a display screen, follow the steps below:
a Press and hold the
(WPS) button on the control panel for
about 2 - 4 seconds until the status LED blinks quickly.
The machine starts connecting to the wireless network. The LED
blinks slowly for up to two minutes until you press the PBC
button on the access point (or wireless router).
b Press the WPS (PBC) button on the access point (or wireless
router).
13
Ad hoc via USB cable
If you do not have an access point (AP), you may still connect the machine
wirelessly to your computer by setting up an ad hoc wireless network by
following these simple directions.
Items to prepare
•
Network-connected computer
•
Software CD that was provided with your machine
•
A machine installed with a wireless network interface
USB cable
The light blinks fast on the WPS LED. The machine is
connecting to the access point (or wireless router).
•
When the machine is successfully connected to the wireless
network, the WPS LED light stays on.
Creating the ad hoc network in Macintosh
Wireless network set up is completed. After installation is finished, click
Quit.
After completing the wireless network connection, you need to install a
machine driver to print from an application (see "Installation for Macintosh"
on page 134).
Check whether the USB cable is connected to the machine.
Turn on your computer and the wireless network machine.
Insert the supplied software CD into your CD-ROM drive.
Double-click the CD-ROM icon that appears on your Macintosh desktop.
Double-click the MAC_Installer folder > Installer OS X icon.
Click Continue.
Read the license agreement and click Continue.
2. Using a Network-Connected Machine
178
Wireless network setup
10
11
Click Agree to agree to the license agreement.
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may
not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key
can access the network.
When the message that warns that all applications will close on your
computer appears, click Continue.
Click Wireless Network Setting button on the User Options Pane.
• Encryption: Select the encryption (None, WEP64, WEP128).
• Network Key: Enter the encryption network key value.
The software searches for wireless network devices.
• Confirm Network Key: Confirm the encryption network key value.
• WEP Key Index: If you are using WEP Encryption, select the appropriate
WEP Key Index.
If the search has failed, check if the USB cable is connected between the
computer and machine properly, and follow the instructions in the window.
12
The wireless network security window appears when the ad hoc network
has security setting.
Select Open System or Shared Key for the authentication and click Next.
After searching the wireless networks, a list of wireless networks your
machine has searched appears.
• WEP (Wired Equivalent Privacy) is a security protocol preventing
unauthorized access to your wireless network. WEP encrypts the data
portion of each packet exchanged on a wireless network using a 64-bit
or 128-bit WEP encryption key.
If you want to use the Samsung default ad hoc setting, select the last
wireless network on the list, which Network Name(SSID) is Portthru
and Signal is Printer Self Network.
Then, click Next.
If you want to use other ad hoc settings, select another wireless network
from the list.
13
The window showing the wireless network settings appears. Check the
settings and click Next.
If you want to change ad hoc settings, click the Advanced Setting button.
• Enter the wireless Network Name: Enter the SSID name (SSID is casesensitive).
• Operation Mode: Select ad hoc.
• Channel: Select the channel (Auto Setting or 2412 MHz to 2467 MHz).
2. Using a Network-Connected Machine
179
Wireless network setup
14
Before entering the IP address for the machine, you must know the
computer’s network configuration information. If the computer’s network
configuration is set to DHCP, the wireless network setting should also be
DHCP. Likewise, if the computer’s network configuration is set to Static, the
wireless network setting should also be Static.
If the network cable is connected, it may have trouble finding the
machine when configuring the wireless network.
15
16
If your computer is set to DHCP and you want to use Static wireless network
setting, you must contact the network administrator to get the static IP
address.
• For the DHCP method
If the IP address assignment method is DHCP, check if DHCP is shown in
the Wireless Network Setting Confirm window. If it shows Static, click
Change TCP/IP to change the assignment method to Receive IP
address automatically (DHCP).
• For the Static method
If the IP address assignment method is Static, check if Static is shown in
the Wireless Network Setting Confirm window. If it shows DHCP, click
Change TCP/IP to enter the IP address and other network configuration
values for the machine.
For example,
If the computer’s network information is shown as follows:
- IP address: 169.254.133.42
- Subnet Mask: 255.255.0.0
Then, the machine’s network information should be as shown below:
- IP address: 169.254.133.43
- Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)
- Gateway: 169.254.133.1
When the window that tells you that the network cable connection is
confirmed appears, disconnect the network cable and click Next.
The wireless network connects according to the network configuration.
Wireless network set up is completed. After installation is finished, click
Quit.
After completing the wireless network connection, you need to install a
machine driver to print from an application (see "Installation for Macintosh"
on page 134).
18
Using a network cable
Machines that do not support the network port will not be able to use this
feature (see "Rear view" on page 23).
Your machine is a network compatible machine. To enable your machine to
work with your network, you will need to perform some configuration
procedures.
2. Using a Network-Connected Machine
180
Wireless network setup
• After completing the wireless network connection, you need to install a
machine driver to print from an application (see "Installing driver over
the network" on page 144).
• See your network administrator, or the person that set up your wireless
network, for information about your network configuration.
IP setting using SetIP Program (Windows)
This program is used to manually set the network IP address of your machine
using its MAC address to communicate with the machine. The MAC address is
the hardware serial number of the network interface and can be found in the
Network Configuration Report.
See "Setting IP address" on page 141.
Items to prepare
Configuring the machine’s wireless network
•
Access point
•
Network-connected computer
•
Software CD that was provided with your machine
•
A machine installed with a wireless network interface
Before starting you will need to know the network name (SSID) of your wireless
network and the network key if it is encrypted. This information was set when
the access point (or wireless router) was installed. If you do not know about your
wireless environment, please ask the person who set up your network.
•
Network cable
To configure wireless parameters, you can use SyncThru™ Web Service.
Printing a network configuration report
Using SyncThru™ Web Service
You can identify the network settings of your machine by printing a network
configuration report.
Before starting wireless parameter configuration, check the cable connection
status.
See "Printing a network configuration report" on page 141.
2. Using a Network-Connected Machine
181
Wireless network setup
Check whether or not the network cable is connected to the machine. If
not, connect the machine with a standard network cable.
•
SSID: SSID (Service Set Identifier) is a name that identifies a wireless
network, access points, and wireless devices attempting to connect
to a specific wireless network must use the same SSID. The SSID is
case sensitive.
•
Operation Mode: Operation Mode refers to the type of wireless
connections (see "Wireless network name and network key" on page
156).
Start a web browser such as Internet Explorer, Safari, or Firefox and enter
your machine’s new IP address in the browser window.
For example,
Select the one Network Name(SSID) in the list.
Click Login on the upper right of the SyncThru™ Web Service website.
Type in the ID and Password then click Login.
•
ID: admin
•
Password: sec00000
When the SyncThru™ Web Service window opens, click Network
Settings.
Click Wireless > Wizard.
Ad-hoc: Allows wireless devices to communicate directly with
each other in a peer-to-peer environment.
Infrastructure: Allows wireless devices to communicate with
each other through an access point.
If your network’s Operation Mode is Infrastructure, select the SSID of the
access point. If the Operation Mode is Ad-hoc, select the machine’s SSID.
Note that “portthru” is the default SSID of your machine.
Click Next.
If the wireless security setting window appears, enter the registered
password (network key) and click Next.
Wizard will help you setup the wireless network configuration. However, if
you want to set the wireless network directly, select Custom.
The confirmation window appears, please check your wireless setup. If
the setup is right, click Apply.
2. Using a Network-Connected Machine
182
Wireless network setup
Disconnect the network cable (standard or network). Your machine should
then start communicating wirelessly with the network. In case of Ad-hoc
mode, you can use a wireless LAN and wired LAN simultaneously.
When the SyncThru™ Web Service window opens, click Network
Settings.
Click Wireless > Custom.
You can also turn the Wi-Fi network on/off.
19
20
Turning the Wi-Fi network on/off
Setting the Wi-Fi Direct for mobile printing
If your machine has a display, you can also turn on/off the Wi-Fi from the
machine’s control panel using the Network menu.
Wi-Fi Direct is an easy-to-setup peer-to-peer connecting between method for
your printer and a mobile device that provides a secure connection and better
throughput than ad hoc mode.
Check whether the network cable is connected to the machine. If not,
connect the machine with a standard network cable.
With Wi-Fi Direct, you can connect your printer to a Wi-Fi Direct network while
concurrently connecting to an access point, You can also use a wired network
and a Wi-Fi Direct network simultaneously so multiple users can access and print
documents both from Wi-Fi Direct and from a wired network.
Start a web browser such as Internet Explorer, Safari, or Firefox and enter
your machine’s new IP address in the browser window.
For example,
• You cannot connect to the internet through the printer’s Wi-Fi Direct.
• The supported protocol list may differ from your model, Wi-Fi Direct
networks do NOT support IPv6, network filtering, IPSec, WINS, and SLP
services.
Click Login on the upper right of the SyncThru™ Web Service website.
Type in the ID and Password, then click Login.
•
ID: admin
•
Password: sec00000
Setting up Wi-Fi Direct
You can enable Wi-Fi Direct feature by one of the following methods.
2. Using a Network-Connected Machine
183
Wireless network setup
From the USB cable-connected computer(recommended)
•
•
ƒ
Group Owner: Activate this option to assign the printer the Wi-Fi
Direct group’s owner. The Group Owner acts similar to a wireless
access point. We recommend activating this option.
ƒ
Network Key: If your printer is a Group Owner, a Network Key is
required for other mobile devices to connect to your printer. You
can configure a network key yourself, or can remember the given
Network Key that is randomly generated by default.
When setting from the supplied software CD, see the access point via USB
cable.
Windows user, see "Access point via USB cable" on page 163.
Macintosh user, see "Access point via USB cable" on page 172.
After the driver installation is complete, Samsung Easy Printer Manager can
be set and changes in the Wi-Fi Direct can be made.
From the machine (Machines with a display screen)
Samsung Easy Printer Manager is Available for Windows
•
Select Network > Wireless > Wi-Fi Direct from the control panel.
and Macintosh OS users only.
•
Enable Wi-Fi Direct.
From the Start menu, select Programs or All Programs > Samsung
Printers > Samsung Easy Printer Manager > Device Settings >
Network.
From the network-connected computer
ƒ
Wi-Fi Direct On/Off: Select On to enable.
ƒ
Device Name: Enter the printer’s name for searching for your
printer on a wireless network. By default, the device name is the
model name.
ƒ
IP Address: Enter the IP address of the printer. This IP address is
used only for the local network and not for the infrastructure wired
or wireless network. We recommend using the default local IP
address (the default local IP address of the printer for Wi-Fi Direct is
192.168.3.1 )
If your printer is using a network cable or a wireless access point, you can enable
and configure Wi-Fi Direct from SyncThru™ Web Service.
•
Access SyncThru™ Web Service, select Settings > Network Settings >
Wireless > Wi-Fi Direct.
•
Enable or disable Wi-Fi Direct and set other options.
• For Linux OS users,
- Print an IP network configuration report to check the output (see
"Printing a network configuration report" on page 141).
2. Using a Network-Connected Machine
184
Wireless network setup
- Access SyncThru Web Service, select Settings > Network Settings
> Wireless > Wi-Fi Direct.
21
Troubleshooting
- Enable or disable Wi-Fi Direct.
Problems during setup or driver installation
Setting up the mobile device
Printers Not Found
•
After setting up Wi-Fi Direct from the printer, refer to the user manual of the
mobile device you are using to set its Wi-Fi Direct.
•
Your machine may not be turned on. Turn on your computer and the
machine.
•
After setting up Wi-Fi Direct, you need to download the mobile printing
application (For example: Samsung Mobile printer) to print from your
smartphone.
•
USB cable is not connected between your computer and machine. Connect
the machine to your computer using the USB cable.
•
The machine does not support wireless networking. Check the machine's
user's guide included on the software CD supplied with your machine and
prepare a wireless network machine.
• When you have found the printer you want to connect to from your
mobile device, select the printer and the printer's LED will blink. Press the
WPS button on the printer and it will be connected to your mobile
device.
•
If your mobile device does not support WPS, you need to enter the
"Network Key" of a printer instead of pushing the WPS button.
Connecting Failure - SSID Not Found
•
The machine is unable to find the network name (SSID) you have selected or
entered. Check the network name (SSID) on your access point and try
connecting again.
•
Your access point is not turned on. Turn on your access point.
2. Using a Network-Connected Machine
185
Wireless network setup
Subnet Mask: 255.255.0.0
Connecting Failure - Invalid Security
ƒ
•
Then the machine’s network information should be as below:
Security is not configured correctly. Check the configured security on your
access point and machine.
Connecting Failure - General Connection Error
•
Your computer is not receiving a signal from your machine. Check the USB
cable and your machine’s power.
Connecting Failure - Connected Wired Network
•
IP address: 169.254.133.43
ƒ
Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)
ƒ
Gateway: 169.254.133.1
Other problems
If problems occur while using the machine on a network, check the following:
Your machine is connected with a wired network cable. Remove the wired
network cable from your machine.
For information on the access point (or wireless router), refer to its own
user's guide.
PC Connection Error
•
ƒ
The configured network address is unable to connect between your
computer and machine.
•
Your computer, access point (or wireless router), or machine may not be
turned on.
•
Check the wireless reception around the machine. If the router is far from
the machine or there is an obstacle, you might have difficulty receiving the
signal.
•
Cycle the power for the access point (or wireless router), machine, and
computer. Sometimes cycling the power can recover network
communication.
For a DHCP network environment
The receives the IP address automatically (DHCP) when computer is
configured to DHCP.
For a Static network environment
The machine uses the static address when the computer is configured
to static address.
For example,
If the computer’s network information is as shown below:
ƒ
IP address: 169.254.133.42
2. Using a Network-Connected Machine
186
Wireless network setup
•
If the computer and the machine are connected on the same network and it
cannot be found when searching, firewall software might be blocking the
communication. Refer to the user's guide for the software to turn it off and
try searching for the machine again.
When using the ad hoc mode, in operating systems such as Windows Vista,
you might need to set the wireless connection setting every time you use
the wireless machine.
•
You cannot use infrastructure mode and ad hoc mode at the same time for
Samsung wireless network machines.
•
The machine is within the range of the wireless network.
•
Check whether the machine's IP address is allocated correctly. You can
check the IP address by printing the network configuration report.
•
The machine is located away from obstacles that could block the wireless
signal.
•
Check whether the access point (or wireless router) has a configured
security (password). If it has a password, refer to the access point (or wireless
router) administrator.
•
Check the machine's IP address. Reinstall the machine driver and change the
settings to connect to the machine on the network. Due to the
characteristics of DHCP, the allocated IP address could change if the
machine is not used for a long time or if the access point has been reset.
•
Check whether firewall software (V3 or Norton) is blocking the
communication.
Register the product's MAC address when you confogure the DHCP server
on the access point (or wireless router). Then you can always use the IP
address that is set with the MAC address. You can identify the Mac address
of your machine by printing a network configuration report (see "Printing a
network configuration report" on page 141).
•
Check the wireless environment. You might not be able to connect to the
network in the infrastructure environment where you need to type in a
user's information before connecting to the access point (or wireless router).
•
This machine only supports IEEE 802.11 b/g/n and Wi-Fi. Other wireless
communication types (e.g., Bluetooth) are not supported.
Remove any large metal objects between the access point (or wireless
router) and the machine.
Make sure the machine and wireless access point (or wireless router) are not
separated by poles, walls, or support columns containing metal or concrete.
•
The machine is located away from other electronic devices that may
interfere with the wireless signal.
Many devices can interfere with the wireless signal, including a microwave
oven and some Bluetooth devices.
•
Whenever the configuration of your access point (or wireless router)
changes, you must do the product's wireless network setup again.
2. Using a Network-Connected Machine
187
3. Useful Setting Menus
This chapter explains how to browse the current status of your machine, and the method of setting for advanced
machine setup.
• Before you begin reading a chapter
189
• Print menu
190
• Copy menu
191
• Fax menu
198
• Scan menu
202
• System setup
204
• Admin setup
216
• Custom setup
217
Before you begin reading a chapter
This chapter explains all the features available for this series' models to help users easily understand the features.
You can check the features available for each model in the Basic Guide (see "Menu overview" on page 33).
The following are tips for using this chapter
•
The control panel provides access to various menus to set up the machine or use the machine’s functions. These menus can be accessed by pressing
•
Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine.
•
For models that do not have the
•
Some menu names may differ from your machine depending on its options or the models.
(Menu).
(Menu) on the control panel, this feature is not applicable (see "Control panel overview" on page 24).
3. Useful Setting Menus
189
Print menu
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
To change the menu options:
•
Press
(Menu) > Print Setup on the control panel.
•
Or press Setup > Machine Setup > Print Setup on the touch screen.
Item
Description
Orientation
Selects the direction in which information is printed on a
page.
Copies
You can enter the number of copies using the number
keypad.
Resolution
Specifies the number of dots printed per inch (dpi). The
higher the setting, the sharper printed characters and
graphics.
Darkness
Lightens or darkens the print on the page. The Normal
setting usually produces the best result. Use the Light
toner density setting to save toner.
Darken Text
Prints text darker than on a normal document.
Emulation
Sets the emulation type and option.
3. Useful Setting Menus
190
Copy menu
Item
Copy feature
Description
Reduces or enlarges the size of a copied image (see
"Reduced or enlarged copy" on page 60).
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
Reduce/Enlarge
If the machine is set Eco mode, reduce and
enlarge features are not available.
To change the menu options:
•
Press
•
Or press Setup > Machine Setup > Default Setting > Copy Default on the
touch screen.
•
(copy) >
Darkness
Adjusts the brightness level to make a copy that is
easier to read, when the original contains faint
markings and dark images (see "Darkness" on page 59)
Contrast
Adjusts the contrast level to scan an original that is
easier to read, when the original contains too faint or
too dark contents (see "Contrast" on page 59)
Original Type
Improves the copy quality by selecting the document
type for the current copy job (see "Original" on page 59)
Orientation
Sets the original image’s orientation.
Layout
Adjusts the layout format such as poster, clone, ID copy,
2/4-up, booklet, etc.
(Menu) > Copy Feature on the control panel.
Or press Copy > select the menu item you want on the touch screen.
Item
• Scan Size
Description
Sets the image size.
• Original Size
Copies
You can enter the number of copies using the number
keypad.
3. Useful Setting Menus
191
Copy menu
• Collate Copy
Set the machine to sort the copy job. For example, if you
make 2 copies of a 3 page original, one complete 3 page
document will print followed by a second complete
document.
• On: Prints output in sets to match the sequence of
originals.
Item
• 2-up or 4-up
• N-up Copy
Description
Reduces the size of the original images and prints 2 or 4
pages onto one sheet of paper.
• Copy Collation
Description
Item
This copy feature is available only when you
load originals into the document feeder.
• Off: Prints output sorted into stacks of individual
pages.
3. Useful Setting Menus
192
Copy menu
Item
Description
Item
Prints a single-page document onto 4 (Poster 2x2), 9
(Poster 3x3), or 16 (Poster 4x4) sheets of paper, for the
purpose of pasting the sheets together to form one
poster-size document.
Description
Prints multiple original images on a single page. The
number of images is automatically determined by the
original image and the paper size.
Clone Copy
• This copy feature is available only when you
place originals on the scanner glass.
• You cannot adjust the copy size using
Reduce/Enlarge for the Clone Copy
feature.
Poster Copy
• This copy feature is available only when you
place originals on the scanner glass.
• Your original is divided into 9 portions. Each
portion is scanned and printed one by one in
the following order:
3. Useful Setting Menus
193
Copy menu
Item
Description
The Book Copy feature allows you to copy an entire
book. If the book is too thick, lift the cover until its
hinges are caught by the stopper and then close the
cover. If the book or magazine is thicker than 30 mm,
start copying with the cover open.
Item
Description
The machine automatically prints on one or both sides
of the paper, which are then folded to produce a
booklet with all of the pages in the correct sequence.
Booklet
The machine will reduce and correctly adjust the
position of each image to fit on the selected paper.
• Off: Does not use this feature.
Book Copy
Prints an image without its background. This copy
feature removes the background color and can be
helpful when copying an original containing color in
the background, such as a newspaper or a catalog.
• Left Page: Use this option to print left page of the
book.
• Right Page: Use this option to print right page of the
book.
• Both Page: Use this option to print both pages of
the book.
Adjust Bkgd
• Off: Does not use this feature.
• Auto: Optimizes the background.
• Enhance Lev.1~2: The higher the number is, the
more vivid the background is.
This copy feature is available only when you
place originals on the scanner glass.
• Erase Lev.1~4: The higher the number is, the lighter
the background is.
3. Useful Setting Menus
194
Copy menu
Item
Description
Item
Description
Allows you to erase spots, drill holes, fold creases and
staple marks along any of the four edges of a document.
Allows you to create a binding edge for the document.
The image can be adjusted up or down on the page
and/or shifted to the right or left.
• Off: Does not use this feature.
Margin Shift copying
Edge Erase copying
• Off: Does not use this feature.
• Auto Center: Automatically copy in the center of the
paper. This feature is available only when you place
originals on the scanner glass.
• SmallOriginal: rases the edge of the original if it is
small. This feature is available only when you place
originals on the scanner glass.
• Hole Punch: Erases the marks of bookbinding holes.
• Book Center: Erases the middle part of the paper
which is black and horizontal, when you copy a
book. This feature is available only when you place
originals on the scanner glass.
• Custom Margin: Enter the left, right, top, bottom
margin using Number keypad.
• Border Erase: Enter the left, right, top, bottom
margin using Number keypad.
Gray Enhance
copying
When you make a copy in gray scale, use this feature to
get better quality of copy-output.
3. Useful Setting Menus
195
Copy menu
Item
Watermark copying
Description
Item
The watermark option allows you to print text over an
existing document. For example, you use it when you
want to have large gray letters reading “DRAFT” or
“CONFIDENTIAL” printed diagonally across the first
page or all pages of a document.
Description
• 2->1Side
• 2->2Side
Duplex (continue)
• 2->1Side ROT2
You can set the machine to print copies on both sides of
paper.
• Off: Prints in normal mode.
• 1->2Side Short
Duplex
• 1->2Side Long
3. Useful Setting Menus
196
Copy menu
Copy Setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
To change the menu options:
Press
(copy) >
Item
Change Default
(Menu) > Copy Setup on the control panel.
Description
Resets the value or setting to the printer’s out-of-box
state.
3. Useful Setting Menus
197
Fax menu
Item
Fax Feature
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
Resolution
The default document settings procedure good results
when using typical text-based originals. However, if you
send originals that are of poor quality, or contain
photographs, you can adjust the resolution to produce
a higher quality fax (see "Resolution" on page 67).
Duplex
prints the received fax on both sides of paper.
Sends a fax to multiple destinations (see "Sending a fax
to multiple destinations" on page 65).
To change the menu options:
(fax) >
•
Press
(Menu)> Fax Feature on the control panel.
•
Or press Setup > Machine Setup > Default Setting > Fax Default on the
touch screen.
•
Or press Fax > select the menu item you want on the touch screen.
Item
• Scan Size
Description
Description
Multi Send
You cannot send a color fax using this feature.
Sets your machine to send a fax at a later time when you
will not be present (see "Delaying a fax transmission" on
page 255).
Delay Send
Sets the image size.
You cannot send a color fax using this feature.
• Original Size
Contrast
Adjusts the contrast level to scan an original that is
easier to read, when the original contains too faint or
too dark contents.
Darkness
Adjusts the brightness level to scan an original that is
easier to read, when the original contains faint
markings and dark images (see "Darkness" on page 67).
Priority Send
Scans the original into memory and immediately
transmits it when the current operation is finished.
Priority transmission will interrupt a sending to multiple
destinations between stations (example, when the
transmission to station A ends, before transmission to
station B begins) or between redial attempts (see
"Sending a priority fax" on page 256).
3. Useful Setting Menus
198
Fax menu
Item
Description
Forwards the received or sent fax to other destination
by a fax or PC. If you are out of office but have to receive
the fax, this feature may be useful.
Forward
Add Page
Cancel Job
•
Press
(fax) >
(Menu) > Fax Setup > Sending on the control panel.
•
Or press Setup > Machine Setup > Default Setting > Fax Default on the
touch screen.
• See "Forwarding a sentGfax to another destination"
on page 256.
• See "Forwarding a received fax" on page 257.
Secure Receive
To change the menu options:
Stores the received fax in memory without printing out.
To print received documents, you need to enter the
password. You can prevent your received faxes from
being accessed by unauthorized people (see "Receiving
in secure receiving mode" on page 261).
Adds additional documents to a reserved delay fax job
(see "Adding documents to a reserved fax" on page
255).
Item
Redial Times
Sets the number of redial attempts. If you enter 0, the
machine will not redial.
Redial Term
Sets the time interval before automatic redialling.
Prefix Dial
Sets a prefix of up to five digits. This number dials
before any automatic dial number is started. It is useful
for accessing a PABX exchange.
ECM Mode
Sends faxes using error correction mode (ECM) to
makes sure the faxes are sent smoothly without any
error. It may take more time.
Send Report
Sets the machine to print a report whether a fax
transmission was successfully completed or not. If you
select On-Error, the machine prints a report only when
a transmission is not successful.
Image TCR
Prints a transmission report with a minimized image of
the first page of the fax sent.
Dial Mode
Sets the dialing mode to either tone or pulse. This
setting may not be available depending on your
country.
Cancels the delayed fax job which is saved in memory
(see "Canceling a reserved fax job" on page 256).
Sending setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
Description
3. Useful Setting Menus
199
Fax menu
Item
Description
Sends faxes at a preset toll-saving time to save on call
costs. This setting may not be available depending on
your country.
Toll Save
Makes it easy to configure the necessary fax options
such as machine ID, fax number, etc.
Setup Wizard
Item
Ring To Answer
Specifies the number of times the machine rings before
answering an incoming call.
Stamp RCV Name
Automatically prints the page number, and the date
and time of reception at the bottom of each page of a
received fax.
Rcv Start Code
Initiates fax reception from an extension phone
plugged into the EXT socket on the back of the
machine. If you pick up the extension phone and hear
fax tones, enter the code. It is preset to *9* at the
factory.
Auto Reduction
Automatically reduces an incoming fax page to fit the
size of the paper loaded in the machine.
Discard Size
Discards a specific length from the end of the received
fax.
Junk Fax Setup
Blocks any unwanted faxes that you stored in the
memory as junk fax numbers. This setting may not be
available depending on your country.
DRPD Mode
Enables a user to use a single telephone line to answer
several different telephone numbers. You can set the
machine to recognize different ring patterns for each
number. This setting may not be available depending
on your country (see "Receiving faxes using DRPD
mode" on page 260).
Receiving setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
To change the menu options:
•
Press
(fax) >
•
Or press Setup > Machine Setup > Default Setting > Fax Default on the
touch screen.
Item
Receive Mode
(Menu) > Fax Setup > Receiving on the control panel.
Description
Selects the default fax receiving mode.
Description
3. Useful Setting Menus
200
Fax menu
Item
Duplex Print
• Doc Box Saving
• Document Box
Saving
Description
Prints the received fax data on both sides of the paper.
You can save the paper usage.
Stores received faxes in the common box. This menu
only appears when an optional mass storage device
(HDD) drive has been installed (see "Variety feature" on
page 10).
3. Useful Setting Menus
201
Scan menu
Item
Scan feature
• SMB Default
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
To change the menu options:
•
Press
•
Or press Setup > Machine Setup > Default Setting > Scan Default on the
touch screen.
•
(scan) >
• SMB
Sets scan destination to an SMB server. You scan the
originals and send the scanned image to an SMB server
(see "Scanning to FTP/SMB server" on page 245).
Send Report
Prints a confirmation report showing whether the
scanned image sending was successful.
Local PC
Sets scan destination to a usb-connected computer.
You scan the originals and save the scanned image to a
directory such as My Documents (see "Basic Scanning"
on page 63).
Network PC
Sets scan destination to a network-connected
computer. You scan the originals and save the scanned
image to a directory such as My Documents (see
"Scanning from network connected machine" on page
243).
Document Box
Sets scan destination to a Document Box. You scan the
originals and send the scanned image to the storage
which called Document Box in the machine.
Shared Boxes
Sets scan destination to a shared folder. You can create
and use the shared folder (see "Using shared folder
features" on page 264).
(Menu) > Scan Feature on the control panel.
Or press Scan > select the menu item you want on the touch screen.
Item
• USB Default
• USB
• E-mail Default
• Send Email
• Custom Email
• FTP Default
• FTP
Description
Sets scan destination to a USB. You scan the originals
and save the scanned image to a USB device.
Sets scan destination to an email. You scan the originals
and email the scanned image to destinations (see
"Scanning to email" on page 244).
Description
Sets scan destination to an FTP server. You scan the
originals and send the scanned image to an FTP server
(see "Scanning to FTP/SMB server" on page 245).
3. Useful Setting Menus
202
Scan menu
Item
Scan setup
Contrast
Description
Adjust the contrast level to scan lighter or darker than
the original.
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
To change the menu options:
•
Press
(scan) >
(Menu) > Scan Setup on the control panel.
•
Or press Setup > Machine Setup > Default Setting > Scan Default on the
touch screen.
Item
• Scan Size
Description
Sets the image size.
• Original Size
Original Type
Sets the original document’s type.
Resolution
Sets the image resolution.
Color Mode
Sets the color mode.
File Format
Sets the file format in which the image is to be saved. If
you select BMP, JPEG, TIFF, or PDF, you can select to
scan multiple pages.
Darkness
Adjusts the brightness level to scan.
3. Useful Setting Menus
203
System setup
Item
Machine setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
Select Form
Form overlay is images stored on the printer’s mass
storage device (HDD) as a special file format that can be
printed in layers on any document.
HDD Spooling
When On, stores documents on the mass storage device
(HDD) for network printing.
Language
Sets the language of the text that appears on the control
panel display.
Default Mode
Sets the machine’s default mode among fax mode, copy
mode, or scan mode.
Default Paper Size
You can set the default paper size to use.
To change the menu options:
•
Press
•
Or press Setup > Machine Setup > Initial Setup on the touch screen.
Item
(Menu) > System Setup > Machine Setup on the control panel.
Sets how long the machine waits before going to power
save mode.
Description
Machine ID
Sets the machine ID which will be printed at the top of
each fax page that you send.
Fax Number
Sets the fax number which will be printed at the top of
each fax page that you send.
Date & Time
Sets the date and time.
Clock Mode
Selects the format for displaying time between 12 hr. and
24 hr.
Power Save
• Single Form: Prints all page using the first form.
• Double Form: Prints the front page using the first
form and the back page using the second form.
When the machine does not receive data for an extended
period of time, power consumption is automatically
lowered.
Sets how long the machine’s scanner part waits before
going to power save mode.
Scan PWR Save
• Off: Prints in normal mode.
Form Menu
Description
System Timeout
When the scanner does not receive data for an extended
period of time, power consumption is automatically
lowered.
Sets the time that the machine remembers previously
used copy settings. After the timeout, the machine
restores the default copy settings.
3. Useful Setting Menus
204
System setup
Item
Job Timeout
Description
Sets the length of time the printer waits before printing
the last page of a print job that does not end with a
command to print the page.
You can set the condition to wake up from power-save
mode. Set the item on.
Wakeup Event
• ButtonGPress: GWhen you press any button except
power button, the machine wake up from the power
save mode.
• Scanner: When you insert paper in the document
feeder, the machine wake up from the power save
mode.
Item
Auto CR
Allows you to append the required carriage return to
each line feed, which is useful for Unix or DOS users.
Firmware Version
Shows the product’s firmware version.
AutoComplete
Provides suggestions while you type an email address or
fax number. This enables you to find and select the data
without typing it in completely.
• Tray Chaining
• Auto Tray Switch
• Printer: When you open or close the paper tray, the
machine wake up from the power save mode.
• Off: If a paper mismatch occurs, the machine waits
until you insert the correct paper.
• On: If a paper mismatch occurs, an error message will
display. The machine waits for about 30 second, then
automatically clear the message and continue
printing.
• Altitude Adj.
• Altitude
Adjustment
Optimize print quality according to the machine’s
altitude.
Determine whether or not the machine continues
printing when it detects the paper does not match. For
example, if both tray 1 and tray 2 are filled with the same
size paper, the machine automatically prints from tray 2
after the tray 1 runs out of paper.
This option does not appear if you selected Auto
for Paper Source from printer driver.
Determine whether or not the machine continues
printing when it detects the paper does not match the
paper settings.
Auto Continue
Description
Paper Substit.
Paper Substitution
Paper Mismatch
Automatically substitutes the printer driver’s paper size
to prevent the paper mismatch between Letter and A4.
For example, if you have A4 paper in the tray but you set
the paper size to Letter in the printer driver, the machine
prints on A4 paper and vice versa.
Determine whether to disregard the paper mismatch
error or not. Select Off, then the machine does not stop
printing even if the paper mismatches.
3. Useful Setting Menus
205
System setup
Item
PrintBlankPage
Multi-Bin
Description
Item
Import Setting
Imports data stored on a USB memory stick to the
machine.
Export Setting
Exports data stored on a USB memory stick to the
machine.
Toner Save
Activating this mode extends the life of your toner
cartridge and reduces your cost per page beyond what
one would experience in the normal mode, but it reduces
print quality.
Quiet Mode
• Clean Fuser: Cleans the fuser by printing a sheet.
You can reduce the printing noise by turning this menu
on. However, the printing speed and quality may be
declined.
• CLR Empty Msg.: This option appears only when
toner cartridge is empty.
Allows you to save print resources and enables ecofriendly printing.
The printer detects the printing data from computer
whether a page is empty or not. You can set to print or
skip the blank page.
• Mode: Selects the multi-bin mode you want to use.
• Default Bin: Selects the bin to use as a default.
Default Source
Sets the tray to use as a default.
Address Book
Views or prints the phone book or email address list.
• Clean Drum: Cleans the OPC drum of the cartridge by
printing a sheet.
• Supplies Info.: Allows you to check how many pages
are printed and how much toner is left in the cartridge.
Maintenance
Description
• TonerLow Alert: If toner in the cartridge has run out,
a message informing the user to change the toner
cartridge appears. You can set the option for this
message to appear or not.
• Paper Stacking: If you use a machine in a humid area,
or you are using the damp print media caused by a
high humidity, the print-outs on the output tray may
be curled and may not be stacked properly. In this
case, you can set the machine to use this function to
let print-outs stacked firmly. But, using this function
will make the print speed slow.
• Default Mode: Select whether to turn the Eco mode
on or off.
Eco Settings
On force (On-Forced): Sets the Eco mode on with
password. If a user wants to turn the Eco mode
on/off, the user needs to enter the password.
• Select Template (Select Temp.): Selects the eco
template set from the SyncThru™ Web Service.
Clear Setting
Restores the machine’s factory default settings.
3. Useful Setting Menus
206
System setup
10
Paper setup
Sound / Volume
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
To change the menu options:
To change the menu options:
•
Press
•
Press
•
Or press Setup > Machine Setup > Paper Setup on the touch screen.
•
Or press Setup > Machine Setup > Initial Setup > Sound/Volume on the
touch screen.
(Menu) > System Setup > Paper Setup on the control panel.
Item
Paper Size
(Menu) > System Setup > Sound/Volume on the control panel.
Description
Sets the paper size as A4, Letter, or other paper sizes,
according to your requirements.
Paper Type
Chooses the type of the paper for each tray.
Paper Source
Selects from which tray the paper is used.
Margin
Sets the margins for the document.
Tray Confirm
Activates the tray confirmation message. If you open and
close a tray, a window asking you whether to set the
paper size and type for the tray just opened appears.
Item
Description
Key Sound
Turns the key sound on orGoff. With this option set to on,
a tone sounds each time a key is pressed.
Alarm Sound
Turns the alarm sound on orGoff. With this option set to
on, an alarm tone sounds when an error occurs or fax
communication ends.
3. Useful Setting Menus
207
System setup
11
Item
Description
Report
Turns on or off the sounds from the telephone line
through the speaker, such as a dial tone or a fax tone.
With this option set to Comm. which means the speaker
is on until the remote machine answers.
Speaker
You can adjust the volume level using On Hook
Dial. You can adjust the speaker volume only
when the telephone line is connected.
To change the menu options:
a Press
•
Press
•
Or press Setup > Machine Setup > Reports on the touch screen.
(fax) on the control panel.
b Press On Hook Dial. A dial tone sounds from
the speaker.
c Press the arrows until you hear the volume you
want.
d Press On Hook Dial to save the change and
return to ready mode.
Ringer
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
Adjusts the ringer volume. For the ringer volume, you can
select off, low, middle, and high level.
(Menu) > System Setup > Report on the control panel.
Item
Description
Menu Map
Prints the menu map which shows the layout and
current settings of this machine.
All Reports
Prints all kinds of reports that this machine
provides.
Configuration
Prints a report on the machine's overall
configuration.
• Supplies Info.
Prints supplies’ information page.
• Supplies Information
Address Book
Prints all of the email addresses currently stored
in the machine’s memory.
3. Useful Setting Menus
208
System setup
Item
Demo Page
Fax Send
Description
Prints the demo page to check whether your
machine is printing properly or not.
Prints a transmission report including the fax
number, the number of pages, the elapsed time
of the job, the communication mode, and the
communication results for fax job. You can set up
your machine to automatically print a
transmission confirmation report after each fax
job.
Item
• User Auth
• Local User
Authentication
Description
Prints the authorized users who are allowed to
use the email function.
PCL Font
Prints the PCL font list.
• PS Font
Prints the PS/PS3 font list.
• PS3 Font List
EPSON Font
Prints the EPSON font list.
Prints information on the faxes you have recently
sent.
KSC5843 Font
Prints the KSC5843 font list.
Fax Sent
KSC5895 Font
Prints the KSC5895 font list.
Fax Received
Prints information on the faxes you have recently
received.
KSSM Font List
Prints the KSSM font list.
• Net User Auth
Email Sent
Prints information on the emails you have
recently sent.
Prints the users and their IDs who logged in the
domain.
• Schedule Jobs
• Fax Scheduled Jobs
Prints the document list currently stored for
delayed faxes along with the starting time and
type of each operation.
JunkFax
Prints the fax numbers specified as junk fax
numbers.
• Network Conf.
• Network Configuration
Prints information on your machine’s network
connection and configuration.
• Network User
Authentication
Usage Counter
Prints a usage page. The usage page contains the
total number of pages printed.
Fax Options
Prints the information of a fax reports.
• Stored Job List
• Stored Jobs
Prints jobs currently stored in the optional
memory or on a mass storage device (HDD).
• Completed Job
Prints list of completed jobs.
• Completed Jobs
3. Useful Setting Menus
209
System setup
Item
Description
This is used only available when Job Accounting
is enabled from the SyncThru™ Web Admin
Service. You can print a report of printout counts
for each user.
Accounting Report
Item
Supplies Life
Shows the supply life indicators (see "Monitoring the
supplies life" on page 78.)
TonerLow Alert
Customizes the level to alert toner low or toner empty
(see "Setting the toner low alert" on page 79).
• Serial Number
12
Maintenance
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
• Serial No.
Shows the machine’s serial number. When you call for
service or register as a user on the Samsung website, you
can find this.
Paper Stacking
Enables the automatic linking feature for trays. when one
tray is not available for paper empty or mismatch, this
option allows your printer to feed paper from another
available tray.
Color
Allows you to adjust the color setting such as contrast
level, color registration, color density, etc.
Ram Disk
Sets some part of ram disk to the job storage area. Using
the storage area activates the job manage menu (see "Job
manage" on page 211). This allows the data from your
computer to be sent to the print queue of the ram disk.
To change the menu options:
•
Press
(Menu) > System Setup > Maintenance on the control panel.
•
Or press Setup > Machine Setup > Initial Setup on the touch screen.
Item
Description
Description
CLR Empty Msg.
When toner cartridge is empty, this option appears. You
can clear the empty message.
Ignore Toner
You can set the machine to ignore the toner empty
message and continue printing except incoming faxes.
3. Useful Setting Menus
210
System setup
13
Item
Clear setting
• Scan Setup
• Scan Default
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
Press
•
Or press Setup > Machine Setup > Restore Options on the touch screen.
Restores all of the scan options to the factory
default.
System Setup
Restores all of the system options to the factory
default.
Network Setup
Restores all of the network options to the factory
default. (Reboot required.)
Address Book
Clears all of the email address entries stored in
memory.
• Fax Sent
Clears all records of sent faxes.
To change the menu options:
•
Description
(Menu) > System Setup > Clear Setting on the control panel.
• Sent Report
Item
Description
Email Sent
Clears all records of sent emails.
Clears all records of received faxes.
All Settings
Clears all of the data stored in memory and resets
all of your settings to the factory default.
• Fax Received
Printer Setup
Restores all of the printer options to the factory
default.
• Rcvd Report
Paper Setup
Restores all of the paper options to the factory
default.
• Fax Setup
• Fax Default
• Copy Setup
• Copy Default
• Fax RCV Report
14
Job manage
Restores all of the fax options to the factory
default.
Restores all of the copy options to the factory
default.
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
3. Useful Setting Menus
211
System setup
To change the menu options:
•
Press
16
USB setup
(Menu) > System Setup > Job Manage on the control panel.
Item
Description
Active Job
Shows the print job lists that are waiting to be printed.
Store Job
Shows the print job lists that are stored on the disk.
File Policy
If the memory already has the same name when you
entered a new file name, you can rename or overwrite it.
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
•
Press USB on the touch screen.
Option
Description
15
Print From
Image overwrite
Scan to USB
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
•
Press
Item
Manual
Views the file list from the File Navigation. Select a file to
print.
Sets scan destination to a USB. You scan the originals and
save the scanned image to a USB device.
File Manage
Views the file list from the File Navigation. Select a file to
delete. You can format the USB device.
Show Space
Shows the remaining space.
(Menu) > System Setup > ImageOverwrite on the control panel.
Description
You can overwrite the embedded USB memory to clear
all of the data stored in.
3. Useful Setting Menus
212
System setup
17
18
Emulation setup
Email setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
•
Press
(Menu) > Print Setup > Emulation on the control panel.
Item
Emulation Type
Setup
Description
The machine language defines how the computer
communicates with the machine.
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
•
Press Setup > Machine Setup > Email Setup on the touch screen.
Option
Description
SMTP Server
Sets the SMTP server configuration.
Send to Self
Sets to send the mail to yourself so that you can
back up the email or use as a reminder.
Default To Address
Sets an email destination address as a default one.
Default From
Sets a sender’s email address as a default one.
Default Subject
Sets an email’s subject as a default one.
Sets the detailed settings for the selected emulation type.
3. Useful Setting Menus
213
System setup
Doc Box Feature
19
Address book setup
•
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
•
Press
panel.
(Menu) > Document Box > Doc Box Feature on the control
Option
Add From Scan
Stores scanned documents in a box. The stored file will be
named automatically as
"yearmonthdayhourminutesecond".
Task From Box
Prints a document from a box.
Press Setup > Machine Setup > Address Book on the touch screen.
Option
Description
PhoneBook
Adds, views, prints or deletes the phone book list. You
also can create a group.
Doc Box Setup
Email
Adds, views, prints or deletes the email list. You also can
create a group.
•
Press
(Menu) > Document Box > Doc Box Setup on the control panel.
Option
20
Document box setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
Description
Description
Add From Scan
Sets the default options for storing the document to a
box.
Task From Box
Sets the default options for printing the document from a
box.
3. Useful Setting Menus
214
System setup
21
Option
Network setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
Wireless
Selects this option to use the wireless network.
Clear Setting
Reverts the network settings to the default values.
(Reboot required.)
• Network Conf.
• Network
Configuration
•
Press
(Menu)> Network on the control panel,
•
Or press Setup > Machine Setup > Network Setup on the touch screen.
Option
Description
This list shows information on your machine’s network
connection and configuration.
Net. Activate
You can sets whether to use Ethernet on or off.
Http Activate
You can sets whether to use SyncThru™ Web Service or
not.
Description
Selects the appropriate protocol and configure
parameters to use the network environment.
TCP/IP (IPv4)
There are lots of parameters to be set. If you are
not sure, leave as is, or consult the network
administrator.
TCP/IP (IPv6)
Selects this option to use the network environment
through IPv6 (see "IPv6 configuration" on page 153).
Ethernet Speed
Configure the network transmission speed.
802.1x
You can selects the user authentication for network
communication. For detailed information consult the
network administrator.
3. Useful Setting Menus
215
Admin setup
Item
Description
Password Protect
Sets the password to access the AdminGSetup menu.GSelect
On to use this option and enter the passwordU
Change
Password
Changes the machine’s password for accessing the Admin
Setup.
• Clean Fuser: Cleans the fuser by printing a sheet. The
printed sheet has toner debris on it.
• CLR Empty Msg.: Prevents the Toner Low Alert
message from appearing on the display.
• Supplies Info.: Allows you to check how many pages are
printed and how much toner is left in the cartridge.
Maintenance
• Toner Low Alert: If toner in the cartridge has run out, a
message informing the user to change the toner
cartridge appears. You can set the option for this
message to appear or not.
• Ram Disk: Enables/disables RAM disk to manage jobs.
Depending on the installed optional memory size, you
can set the RAM disk size to between 32 and 64 MB. This
option does not appear if you have installed mass storage
device (HDD).
3. Useful Setting Menus
216
Custom setup
This menu appears only when the XOA (eXtensible Open Architecture) web
application is installed. Contact the administrator to use this menu.
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
•
Press
(Menu)) > Custom on the control panel.
3. Useful Setting Menus
217
4. Special Features
This chapter explains special copying, scanning, faxing, and printing features.
• Altitude adjustment
219
• Storing email address
220
• Entering various characters
222
• Setting up the fax address book
223
• Registering authorized users
226
• Printing features
227
• Scan features
242
• Fax features
253
• Using shared folder features
264
• Using memory/hard drive features
265
• The procedures in this chapter are mainly based on Windows 7.
• It may be necessary to press OK to navigate to lower-level menus for some models.
Altitude adjustment
Print quality is affected by atmospheric pressure, which is determined by the
height of the machine above sea level. The following information will guide you
on how to set your machine for the best print quality.
Before you set the altitude value, determine the altitude where you are.
4,000 m
(13,123 ft)
• If your machine is connected to the network, you can set the altitude via
SyncThru™ Web Service (see "Using SyncThru™ Web Service" on page
270).
• You can also set the altitude in System Setup option on the machine’s
display (see "Machine’s basic settings" on page 38).
3,000 m
(9,842 ft)
2,000 m
(6,561 ft)
1,000 m
(3,280 ft)
High 3
High 2
High 1
Normal
You can set the altitude value from Device Settings in 6DPVXQJ(DV\3ULQWHU
0DQDJHUprogram or Machine section in Printer Settings Utility program.
•
For Windows and Macintosh users, see "Device Settings" on page 275.
•
For Linux users, see "Using Smart Panel" on page 278.
4. Special Features
219
Storing email address
This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
You can set up address book with the email addresses you use frequently via
SyncThru™ Web Service and then easily and quickly enter email addresses by
entering the location numbers assigned to them in address book.
If you need to set SMB or FTP sever information, check SMB or FTP and set
the information.
Click Apply.
If you make a group, click Address Book > E-mail Group > Add Group.
Select the Speed No. and enter Group Name.
Storing on your machine
You can easily add individual address if you check Yes for Add individual(s)
after this group is created.
To scan and send an image as an email attachment, you need to set up email
address using SyncThru™ Web Service.
Access the SyncThru™ Web Service (see "Using SyncThru™ Web Service"
on page 270).
Click Login on the upper right of the SyncThru™ Web Service website.
Click Apply.
Type in the ID and Password then click Login.
•
ID: admin
•
Password: sec00000
Click Address Book > Individual > Add.
Select the Speed No. and enter e-mail address and fax number.
4. Special Features
220
Storing email address
Searching for an email address
Searching sequentially through memory
Select
(scan) >
(Address Book) > Search&Send > Select an
address group > All on the control panel.
Or select Setup > Machine Setup > Next > Address Book > Email >
View List > Individual or Group on the touch screen.
Search through the entire memory in index (numerical) order, and select
the name and address you want.
Searching with a particular first letter
Select
(scan) on the control panel.
Press
(Address Book) > Search&Send > Select an address group >
ID on the control panel.
Enter the first few letters of the name you want.
Press the arrows until the name and number you want appears.
4. Special Features
221
Entering various characters
As you perform various tasks, you may need to enter names and numbers. For
example, when you set up your machine, you enter your name or your
company’s name, and the fax number. When you store fax numbers or email
addresses in memory, you may also enter the corresponding names.
Entering alphanumeric characters
Press the button until the correct letter appears on the display. For example, to
enter the letter O, press 6, labeled with MNO. Each time you press 6, the display
shows a different letter, M, N, O, m, n, o and finally 6. To find the letter that you
want to enter, see "Keypad letters and numbers" on page 222.
• You can enter a space by pressing 1 twice.
• To delete the last digit or character, press the left/right or up/down arrow
button.
Key
Assigned numbers, letters, or characters
@/.‘1
ABCabc2
DEFdef3
GHIghi4
JKLjkl5
MNOmno6
PQRSpqrs7
TUVtuv8
WXYZwxyz9
&+-,0
*%^_~!#$()[]
(These symbols are available when you type for network authentication.)
Keypad letters and numbers
#=|?":{}<>;
(These symbols are available when you type for network authentication.)
• Special character sets may differ from your machine depending on its
options or the models.
• Some of the follow key values may not appear depending on the job you
are doing.
4. Special Features
222
Setting up the fax address book
You can set up speed number with the fax numbers you use frequently via
SyncThru™ Web Service and then easily and quickly enter fax numbers by
entering the location numbers assigned to them in address book.
Using speed dial numbers
When you are prompted to enter a destination number while sending a fax,
enter the speed dial number at which you stored the number you want.
Registering a speed dial number
Select
(fax) >
the control panel.
• For a one-digit (0-9) speed dial number, press and hold the
corresponding digit button on the number keypad for more than 2
seconds.
(Address Book) > New&Edit > Speed Dial on
• For a two- or three-digit speed dial number, press the first digit button(s)
and then hold down the last digit button for more than 2 seconds.
Or select Setup > Machine Setup > Next > Address Book > Phone
Book > View List > Individual >
screen.
(options) > Add on the touch
• You can print the address book list by selecting
(Address Book) > Print.
Enter a speed dial number and press OK.
If an entry is already stored in the number you choose, the display shows the
message to allow you to change it. To start over with another speed dial
number, press
Editing speed dial numbers
(Back).
Enter the name you want and press OK.
Select
(fax) >
the control panel.
Enter the fax number you want and press OK.
Or select Setup > Machine Setup > Next > Address Book > Phone
Book > View List > Individual on the touch screen.
(fax) >
Press the
(Cancel or Stop/Clear) button to return to ready mode.
(Address Book) > New&Edit > Speed Dial on
Enter the speed dial number you want to edit and press OK.
Change the name and press OK.
4. Special Features
223
Setting up the fax address book
Change the fax number and press OK.
Press
When you have finished, select No when Another No.? appears and
press OK.
Press
(Cancel or Stop/Clear) to return to ready mode.
(Cancel or Stop/Clear) to return to ready mode.
Registering a group dial number
Editing group dial numbers
Select
(fax) >
the control panel.
(Address Book) > New&Edit > Group Dial on
Or select Setup > Machine Setup > Next >Address Book > Phone
Book > View List > Group>
screen.
If an entry is already stored in the number you choose, the display shows the
message to allow you to change it. To start over with another speed dial
number, press
(Back).
Search by entering the first few letters of the speed dial’s name to put in
the group.
Select the name and number you want and press OK.
Select Yes when Add? appears.
(Address Book) > New&Edit > Group Dial on
Or select Setup > Machine Setup > Next > Address Book > Phone
Book > View List > Group on the touch screen.
(options) > Add on the touch
Enter a group dial number and press OK.
Select
(fax) >
the control panel.
Enter the group dial number you want to edit and press OK.
Enter a new speed dial number to add and press OK, then Add? appears.
Enter a speed dial number stored in the group and press OK, Delete?
appears.
Press OK to add or delete the number.
Repeat step 3 to add or delete more numbers.
Select No at the Another No.? and press OK.
Press
(Cancel or Stop/Clear) to return to ready mode.
Repeat step 3 to include other speed dial numbers into the group.
4. Special Features
224
Setting up the fax address book
10
Searching address book for an entry
There are two ways to search for a number in memory. You can either scan from
A to Z sequentially, or you can search by entering the first letters of the name
associated with the number.
Select ct
(fax) >
(Address Book) > Search&Dial > Speed Dial
or Group Dial on the control panel.
Enter All or ID and press OK.
Select ct
(fax) >
(Address Book) > Print on the control panel.
Press OK.
The machine begins printing.
Press the name and number or the keypad button labeled with the letter
you want to search.
For example, if you want to find the name “MOBILE,” press the 6 button,
which is labeled with “MNO.”
Press
(Cancel or Stop/Clear) to return to ready mode.
11
Printing address book
You can check your
(Address Book) settings by printing a list.
4. Special Features
225
Registering authorized users
This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
If you have connected your machine to a network and set up the network
parameters correctly, you can scan and send images over the network. To send
a scanned image through email or via network server safely, you must register
account information of authorized users to your local machine using SyncThru™
Web Service.
Access the SyncThru™ Web Service (see "Using SyncThru™ Web Service"
on page 270).
Click Login on the upper right of the SyncThru™ Web Service website.
Enter User Name, Login ID, Password, Confirm Password, E-mail
Address, and Fax Number.
You can easily add individual address if you check Yes for Add individual(s)
after this group is created.
Click Apply.
Type in the ID and Password then click Login.
•
ID: admin
•
Password: sec00000
Click Security > User Access Control > Authentication.
Select Local Authentication in the Authentication Method, and click
Apply.
Click OK in the confirmation pop-up window.
Click User Profile > Add.
4. Special Features
226
Printing features
• For basic printing features, refer to the Basic Guide (see "Basic printing"
on page 52).
If you want to change the settings for each print job, change it in Printing
Preferences.
• This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
13
Setting your machine as a default machine
12
Changing the default print settings
Click the Windows Start menu.
Select Control Panel > Devices and Printers.
Right-click on your machine.
Click the Windows Start menu.
Select Control Panel > Devices and Printers.
Select your machine.
Right-click your machine and select Set as Default Printer.
Select Printing preferences.
If Printing preferences has a ൘, you can select other printer drivers
connected to the selected printer.
If Printing preferences has a ൘, you can select other printer drivers
connected to the selected printer.
Change the settings on each tab.
Click OK.
4. Special Features
227
Printing features
14
Using advanced print features
Check the Print to file box in the Print window.
Click Print.
XPS printer driver: used to print XPS file format.
• See "Features by models" on page 7.
• The XPS printer driver can be installed only on Windows Vista OS or
higher.
• Install optional memory when an XPS job does not print because the
printer is out of memory.
• For models that provide XPS driver on the software CD:
- You can install the XPS printer driver when you insert the software CD
into your CD-ROM drive. When the installation window appears,
select Advanced Installation > Custom Installation. You can select
the XPS printer driver in the Select Software and Utilities to Install
window.
• For models that provide XPS driver from the Samsung website,
www.samsung.com > find your product> Support or downloads.
Type in the destination path and the file name, and then click OK.
For example, c:\Temp\file name.
Printing to a file (PRN)
You will sometimes need to save the print data as a file.
If you type in only the file name, the file is automatically saved in My
Documents, Documents and Settings, or Users. The saved folder may
differ, depending on your operating system or the application you are
using.
4. Special Features
228
Printing features
Understanding special printer features
You can use advanced printing features when using your machine.
To take advantage of the printer features provided by your printer driver, click Properties or Preferences in the application’s Print window to change the print
settings. The machine name, that appears in the printer properties window may differ depending on the machine in use.
• Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine.
• Select the Help menu or click the
on page 55).
Item
Multiple Pages per
Side
button from the window or press F1 on your keyboard and click on any option you want to know about (see "Using help"
Description
Selects the number of pages to print on a single sheet of paper. To print more than one page per sheet, the pages will be reduced in size and
arranged in the order you specify. You can print up to 16 pages on one sheet.
4. Special Features
229
Printing features
Item
Poster Printing
Description
Prints a single-page document onto 4 (Poster 2x2), 9 (Poster 3x3), or 16 (Poster 4x4) sheets of paper, for the purpose of pasting the sheets
together to form one poster-size document.
Select the Poster Overlap value. Specify Poster Overlap in millimeters or inches by selecting the radio button on the upper right of Basic tab
to make it easier to paste the sheets together.
Prints your document on both sides of a sheet of paper and arranges the pages so that the paper can be folded in half after printing to produce
a booklet.
Booklet Printinga
• If you want to make a booklet, you need to print on Letter, Legal, A4, US Folio, or Oficio sized print media.
• The Booklet Printing option is not available for all paper sizes. Select the available paper Size option under the Paper tab to see what
paper sizes are available.
• If you select an unavailable paper size, this option can be automatically canceled. Select only available paper (paper without
mark).
• Double-sided
Printing
• Double-sided
Printing (Manual)a
or
Print on both sides of a sheet of paper (duplex). Before printing, decide how you want your document oriented.
• You can use this feature with Letter, Legal, A4, US Folio or Oficio sized paper
• If your machine does not have a duplex unit, you should complete the printing job manually. The machine prints every other page of
the document first. After that, a message appears on your computer.
• Skip Blank Pages feature does not work when you select the duplex option.
4. Special Features
230
Printing features
Item
Description
• Double-sided
Printing
• Printer Default: If you select this option, this feature is determined by the settings you have selected on the control panel of the machine.
This option is available only when you use the PCL/XPS printer driver.
• Double-sided
• None: Disables this feature.
Printing (Manual)
• Long Edge: This option is the conventional layout used in bookbinding.
• Short Edge: This option is the conventional layout used in calendars.
• Reverse Double-Sided Printing: Check this option to reverse the print order when duplex printing. This option is not available when you
use Double-sided Printing (Manual).
Paper Options
Changes the size of a document to appear larger or smaller on the printed page by entering in a percentage by which to enlarge or decrease the
document.
Watermark
The watermark option allows you to print text over an existing document. For example, you use it when you want to have large gray letters
reading “DRAFT” or “CONFIDENTIAL” printed diagonally across the first page or all pages of a document.
4. Special Features
231
Printing features
Item
Watermark
(Creating a
watermark)
Watermark
(Editing a watermark)
Watermark
(Deleting a
watermark)
Description
a To change the print settings from your software application, access Printing Preferences.
b Click the Advanced tab, select Edit from the Watermark drop-down list. The Edit Watermarks window appears.
c Enter a text message in the Watermark Message box.
You can enter up to 256 characters. The message displays in the preview window.
To change the print settings from your software application, access Printing Preferences.
Click the Advanced tab, select Edit from the Watermark drop-down list. The Edit Watermarks window appears.
Select the watermark you want to edit from the Current Watermarks list and change the watermark message and options.
Click Update to save the changes.
Click OK or Print until you exit the Print window.
To change the print settings from your software application, access Printing Preferences.
Click the Advanced tab, select Edit from the Watermark drop-down list. The Edit Watermarks window appears.
Select the watermark you want to delete from the Current Watermarks list and click Delete.
Click OK or Print until you exit the Print window.
This option is available only when you use the PCL/SPL printer driver (see "Software" on page 7).
Overlaya
An overlay is text and/or images stored in the computer hard disk drive (HDD) as a special file format that can be printed on any document.
Overlays are often used to take the place of letterhead paper. Rather than using preprinted letterhead, you can create an overlay containing
exactly the same information that is currently on your letterhead. To print a letter with your company’s letterhead, you do not need to load
preprinted letterhead paper in the machine: just print the letterhead overlay on your document.
To use a page overlay, you must create a new page overlay containing your logo or image.
• The overlay document size must be the same as the document you print with the overlay. Do not create an overlay with a watermark.
• The resolution of the overlay document must be the same as that of the document you will print with the overlay.
4. Special Features
232
Printing features
Item
Overlaya
(Creating a new page
overlay)
Description
To save the document as an overlay, access Printing Preferences.
Click the Advanced tab, and select Edit from the Text drop-down list. Edit Overlay window appears.
In the Edit Overlay window, click Create.
In the Save As window, type a name up to eight characters in the File name box. Select the destination path, if necessary (The default is
C:\Formover).
e Click Save. The name appears on the Overlay List.
f Click OK or Print until you exit the Print window.
The file is not printed. Instead, it is stored on your computer hard disk drive.
a Click the Advanced tab.
b Select the desired overlay from the Text drop-down list.
c If the overlay file you want does not appear in the Text drop-down list, select Edit... from the list and click Load. Select the overlay file you
want to use.
If you have stored the overlay file you want to use in an external source, you can also load the file when you access the Open window.
Overlaya
After you select the file, click Open. The file appears in the Overlay List box and is available for printing. Select the overlay from the Overlay
(Using a page overlay)
List box.
d If necessary, check Confirm Page Overlay When Printing box. If this box is checked, a message window appears each time you submit a
document for printing, asking you to confirm printing an overlay on your document.
If this box is not checked and an overlay has been selected, the overlay automatically prints with your document.
e Click OK or Print until you exit the Print window.
Overlaya
(Deleting a page
overlay)
In the Printing Preferences window, click the Advanced tab.
Select Edit in the Text drop down list.
Select the overlay you want to delete from the Overlay List box.
Click Delete.
When a confirming message window appears, click Yes.
Click OK or Print until you exit the Print window. You can delete page overlays that you no longer use.
4. Special Features
233
Printing features
Item
Description
•
This feature is available only if you have installed the optional memory or mass storage device (HDD) (see "Variety feature" on page
10).
• Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine.
• Print Mode: The default Print Mode is Normal, which is for printing without saving the printing file in the memory.
- Normal: This mode prints without storing your document in the optional memory.
Print Mode
- Proof: This mode is useful when you print more than one copy. You can print one copy first to check, then print the rest of the copies later.
- Confidential: This mode is used for printing confidential documents. You need to enter a password to print.
- Store: Select this setting to save a document in the mass storage device (HDD) without printing.
- Store and Print: This mode is used when printing and storing document at the same time.
- Spool: This option can be useful when handling large amounts of data. If you select this setting, the printer spools the document into the
mass storage device (HDD) and then prints it from the mass storage device (HDD) queue, decreasing the computer’s work load.
- Print Schedule: Select this setting to print the document at a specified time.
• User ID: This option is used when you need to find a saved file using the control panel.
• Job Name: This option is used when you need to find a saved file using the control panel.
Encrypts printing data first, and transmits it to the machine. This feature protects the printing information even though the data is snatched on
a network.
Job Encryption
Job Encryption feature is enabled only when the mass storage device (HDD) is installed. The mass storage device (HDD) is used to
decrypt the printing data (see "Variety feature" on page 10).
a. This option is not available when you use XPS driver.
4. Special Features
234
Printing features
Printing
15
Using Direct Printing Utility
There are several ways you can print using the Direct Printing Utility.
•
Direct Printing Utility may not be available depending on model or
optional goods (see "Software" on page 7).
• Available for Windows OS users only.
The Direct Printing Utility window appears.
Select your machine from the Select Printer drop-down list and click
Browse.
Select the file you wish to print and click Open.
What is Direct Printing Utility?
Direct Printing Utility is a program that sends the PDF files directly to your
machine to print without having to opening the file.
To install this program, select Advanced Installation > Custom Installation
and put a check mark in this program when you install the printer driver.
• Mass storage device (HDD) should be installed on your machine, to print
files using this program. (see "Variety feature" on page 10).
• You cannot print PDF files that are restricted. Deactivate the printing
restriction feature and retry printing.
• You cannot print PDF files that are restricted by a password. Deactivate
the password feature, and retry printing.
• Whether or not a PDF file can be printed using the Direct Printing Utility
program depends on how the PDF file was created.
• The Direct Printing Utility program supports PDF version 1.7 and below.
For higher versions, you must open the file to print it.
From the Start menu select Programs or All Programs > Samsung
Printers > Direct Printing Utility > Direct Printing Utility.
The file is added in the Select Files section.
Customize the machine settings for your needs.
Click Print. The selected PDF file is sent to the machine.
Using the right-click menu
Right-click on the PDF file to print and select Direct Printing.
The Direct Printing Utility window appears with the PDF file is added.
Select the machine to use.
Customize the machine settings.
4. Special Features
235
Printing features
Click Print. The selected PDF file is sent to the machine.
Changing printer settings
You can use advanced printing features when using your machine.
16
Macintosh printing
Some features may not be available depending on models or options. It
means that the features are not supported.
Open an application and select Print from the File menu. The machine name,
which appears in the printer properties window, may differ depending on the
machine in use. Except for the name, the composition of the printer properties
window is similar to the following.
Printing multiple pages on one sheet
Printing a document
When you print with a Macintosh, you need to check the printer driver settings
in each application you use. Follow the steps below to print from a Macintosh:
Open the document to print.
Choose your paper size, orientation, scaling, other options, and make
sure that your machine is selected. Click OK.
Open the File menu and click Print.
You can print more than one page on a single sheet of paper. This feature
provides a cost-effective way to print draft copies.
Open an application, and select Print from the File menu.
Select the other options to use.
Open the File menu and click Page Setup (Document Setup in some
applications).
Select Layout from the drop-down list under Orientation. In the Pages
per Sheet drop-down list, select the number of pages you want to print
on one sheet of paper.
Click Print.
The machine prints the selected number of pages to print on one sheet
of paper.
Choose the number of copies and indicate which pages to print.
Click Print.
4. Special Features
236
Printing features
Printing on both sides of the paper
Some features may not be available depending on models or options. It
means that the features are not supported (see "Variety feature" on page
10).
Using help
Click the question mark on the bottom-left corner of the window and click on
the topic you want to know about. A pop-up window appears with information
about that option's feature, which is provided from the driver.
Before printing in the duplex mode, decide on which edge you will be binding
your finished document. The binding options are, as follows:
•
Long-Edge Binding: This option is the conventional layout used in book
binding.
•
Short-Edge Binding: This option is the type often used with calendars.
From your Macintosh application, select Print from the File menu.
Select Layout from the drop-down list under Orientation.
17
Select a binding orientation from the Two-Sided option.
Linux printing
Select the other options to use.
Click Print and the machine prints on both sides of the paper.
Some features may not be available depending on models or options. It
means that the features are not supported.
If you print more than 2 copies, the first copy and the second copy might
print on the same sheet of paper. Avoid printing on both sides of paper
when you are printing more than 1 copy.
4. Special Features
237
Printing features
•
Printing from applications
There are a lot of Linux applications that allow you to print using Common UNIX
Printing System (CUPS). You can print on your machine from any such
application.
Open an application, and select Print from the File menu
Change the print job properties using the following four tabs displayed
at the top of the window.
•
General: Changes the paper size, the paper type, and the
orientation of the documents. It enables the duplex feature, adds
start and end banners, and changes the number of pages per sheet.
Automatic/manual duplex printing may not be available depending on
models. You can alternatively use the lpr printing system or other
applications for odd-even printing.
•
•
Text: Specifies the page margins and set the text options, such as
spacing or columns.
Graphics: Sets image options that are used when printing image
files, such as color options, image size, or image position.
Click Apply to apply the changes and close the Properties window.
Click OK in the LPR GUI window to start printing.
The Printing window appears, allowing you to monitor the status of your
print job.
To abort the current job, click Cancel.
Select Print directly using lpr.
In the LPR GUI window, select the model name of your machine from the
printer list and click Properties.
Advanced: Sets the print resolution, paper source, and destination.
Printing files
You can print many different types of files on your machine using the standard
CUPS, directly from the command line interface. The CUPS lpr utility allows you
to do that, but the driver’s package replaces the standard lpr tool by a much
more user-friendly LPR GUI program.
To print any document file:
Enter lpr  from the Linux shell command line and press
Enter. The LPR GUI window appears.
When you type only lpr and press Enter, the Select file(s) to print
window appears first. Just select any files you want to print and click
Open.
In the LPR GUI window, select your machine from the list, and change
the print job properties.
Click OK to start printing.
4. Special Features
238
Printing features
Configuring Printer Properties
Using the Printer Properties window provided by the Printers configuration,
you can change the various properties for your machine as a printer.
18
Unix printing
Open the Unified Driver Configurator.
If necessary, switch to Printers configuration.
Click OK to apply the changes and close the Printer Properties window.
Some features may not be available depending on models or options. It
means that the features are not supported (see "Features by models" on
page 7).
Select your machine on the available printers list and click Properties.
The Printer Properties window appears.
The following five tabs display at the top of the window:
•
•
General: Allows you to change the printer location and name. The
name entered in this tab displays on the printer list in Printers
configuration.
Connection: Allows you to view or select another port. If you change
the machine port from USB to parallel or vice versa while in use, you
must re-configure the machine port in this tab.
•
Driver: Allows you to view or select another machine driver. By
clicking Options, you can set the default device options.
•
Jobs: Shows the list of print jobs. Click Cancel job to cancel the
selected job and select the Show completed jobs check box to see
previous jobs on the job list.
•
Classes: Shows the class that your machine is in. Click Add to Class
to add your machine to a specific class or click Remove from Class
to remove the machine from the selected class.
Proceeding the print job
After installing the printer, choose any of the image, text, PS or HPGL files to
print.
Execute “printui ” command.
For example, if you are printing “document1”
printui document1
This will open the UNIX Printer Driver Print Job Manager in which the
user can select various print options.
Select a printer that has been already added.
Select the printing options from the window such as Page Selection.
Select how many copies are needed in Number of Copies.
4. Special Features
239
Printing features
To take advantage of the printer features provided by your printer driver,
press Properties.
Press OK to start the print job.
Changing the machine settings
The UNIX printer driver Print Job Manager in which the user can select various
print options in printer Properties.
The following hot keys may also be used: “H” for Help, “O” for OK, “A” for Apply,
and “C” for Cancel.
General tab
•
Paper Size: Set the paper size as A4, Letter, or other paper sizes, according
to your requirements.
•
Paper Type: Choose the type of the paper. Options available in the list box
are Printer Default, Plain, and Thick.
•
Paper Source: Select from which tray the paper is used. By default, it is Auto
Selection.
•
Orientation: Select the direction in which information is printed on a page.
•
Duplex: Print on both sides of paper to save paper.
Automatic/manual duplex printing may not be available depending on
models. You can alternatively use the lpr printing system or other
applications for odd-even printing.
•
Multiple pages: Print several pages on one side of the paper.
•
Page Border: Choose any of the border styles (e.g., Single-line hairline,
Double-line hairline)
Image tab
In this tab, you can change the brightness, resolution, or image position of your
document.
Text tab
Set the character margin, line space, or the columns of the actual print output.
HPGL/2 tab
•
Use only black pen: To print all graphics in black.
•
Fit plot to page: Fit the entire graphic into a single page.
4. Special Features
240
Printing features
Margins tab
•
Use Margins: Set the margins for the document. By default, margins are not
enabled. The user can change the margin settings by changing the values in
the respective fields. Set by default, these values depend on the page size
selected.
•
Unit: Change the units to points, inches, or centimeters.
Printer-Specific Settings tab
Select various options in the JCL and General frames to customize various
settings. These options are specific to the printer and depend on the PPD file.
4. Special Features
241
Scan features
• For basic scanning features, refer to the Basic Guide (see "Basic scanning"
on page 63).
• This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
• The maximum resolution that can be achieved depends upon various
factors, including computer speed, available disk space, memory, the
size of the image being scanned, and bit depth settings. Thus, depending
on your system and what you are scanning, you may not be able to scan
at certain resolutions, especially using enhanced dpi.
19
You can scan the originals with your machine via an USB cable or the network.
The following methodoloqies can be used for scanning your documents:
•
Scan to PC: Scan the originals from the control panel. Then, the scanned
data will be stored in the connected computers My Documents folder (see
"Basic Scanning" on page 63).
•
TWAIN: TWAIN is the one of a preset imaging applications. Scanning an
image launches the selected application, enabling you to control the
scanning process. This feature can be used via the local connection or the
network connection (see "Scanning from image editing program" on page
246).
•
Samsung Scan Assistant/SmarThru 4/SmarThru Office: You can use this
program to scan images or documents.
Basic scanning method
This feature may not be available depending on model or optional goods
(see "Variety feature" on page 10).
See "Scanning with Samsung Scan Assistant" on page 247.
See "Scanning with SmarThru 4" on page 248
See "Scanning with SmarThru Office" on page 248
•
WIA: WIA stands for Windows Images Acquisition. To use this feature, your
computer must be connected directly with the machine via an USB cable
(see "Scanning using the WIA driver" on page 247).
•
USB Memory: You can scan a document and save the scanned image onto
an USB memory device.
•
Email: You can send the scanned image as an email attachment (See
"Scanning to email" on page 244).
•
FTP/SMB: You can scan an image and upload it to an FTP/SMB server (see
"Scanning to FTP/SMB server" on page 245).
4. Special Features
242
Scan features
20
21
Setting the scan settings in the computer
Scanning from network connected machine
This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
Open Samsung Easy Printer Manager (see "Using Samsung Easy
Printer Manager" on page 273).
Select the appropriate machine from the Printer List.
Select Scan to PC Settings menu.
Make sure the printer driver is installed on your computer using the software CD,
since the printer driver includes the scan program (see "Installing the driver
locally" on page 30).
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 49).
Select
Select the option you want.
•
•
•
The machine that does not support the network interface, it will not be able
to use this feature (see "Rear view" on page 23).
Scan Activation: Determines whether or not scanning is enabled on
the device.
(Scan) > Scan to PC > Network PC on the control panel.
Or select Scan > Network PC on the touch screen.
Basic tab: Contains settings related to general scan and deviceG
settings.
If you see Not Available message, check the port connection.
Image tab: Contains settings related to image altering.
Press Save > OK.
Select your registered computer ID, and enter the Password if
necessary.
4. Special Features
243
Scan features
• ID is the same ID as the registered scan ID for 5COUWPI'CU[2TKPVGT
/CPCIGT!
Switch to advanced mode!Scan to 2% Settings.
Setting up an email account
Access the SyncThru™ Web Service (see "Using SyncThru™ Web Service"
on page 270).
Select Settings > Network Settings and Outgoing Mail Server(SMTP).
• Password is the 4 digit number registered password for 5COUWPI'CU[
2TKPVGT/CPCIGT!
Switch to advanced mode!Scan to 2%
Settings.
Select the option you want and press OK.
Scanning begins.
Scanned image is saved in computer’s C:\Users\users name\My
Documents. The saved folder may differ, depending on your operating
system or the application you are using.
Enter the IP address in dotted decimal notation or as a host name.
Enter the server port number, from 1 to 65535.
Check the box next to SMTP Requires Authentication to require
authentication.
Enter the SMTP server login name and password.
Press Apply.
• If the authentication method of SMTP server is POP3 before SMTP, put a
check mark of SMTP Requires POP Before SMTP Authentication.
22
Scanning to email
• Enter the IP address and port number.
This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
4. Special Features
244
Scan features
Scanning and sending an email
23
Scanning to FTP/SMB server
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 49).
Select
This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
(scan) > Scan to Email on the control panel.
Or select Scan > Send Email on the touch screen.
Enter the login name and password if you configured on SyncThru™ Web
Service (see "Using SyncThru™ Web Service" on page 270).
Enter the sender’s and recipient’s email address.
You can send an email to yourself by activating the Auto Send To Self
option in the Settings > Scan > Scan To E-mail on SyncThru™ Web Service.
Enter an email subject and press OK.
Select the file format to scan, and press OK.
Enter the SMTP server login name and password.
The machine begins scanning and then sends the email.
Setting up an FTP/SMB server
Access the SyncThru™ Web Service (see "Using SyncThru™ Web Service"
on page 270).
Select Address Book > Individual > Add.
Check the box next to Add FTP or Add SMB.
Enter the IP address in dotted decimal notation or as a host name.
Enter the server port number, from 1 to 65535.
Check the box next to Anonymous, then the server permits the access
of unauthorized people.
Enter the login name and password.
Enter the domain name if your server is joined to the certain domain,
otherwise just enter your computer name which is registered to the SMB
server.
4. Special Features
245
Scan features
Enter the path for saving the scanned image.
24
Scanning from image editing program
• The folder to save the scanned image must be on the root.
• The folder properties need to be setup as a share.
• Your user name should have the rights to read and write the folder.
10
Press Apply.
Scanning and sending to FTP/SMB server
Make sure that the machine is connected to your computer and
powered on.
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 49).
Open an application, such as Adobe Photoshop.
Make sure that your machine is connected to a network.
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 49).
Select
(scan) > Scan to SMB or Scan to FTP on the control panel.
Or select Scan > SMB or FTP on the touch screen.
You can scan and import documents at the image editing software such as
Adobe Photoshop, if the software is TWAIN-compliant. Follow the steps below
to scan with TWAIN-compliant software:
Click File > Import, and select the scanner device.
Set the scan options.
Scan and save your scanned image.
Select a server and scan format you want.
The machine begins scanning and then sends the scanned image to the
specified server.
4. Special Features
246
Scan features
25
Scanning using the WIA driver
Your machine supports the Windows Image Acquisition (WIA) driver for
scanning images. WIA is one of the standard components provided by Microsoft
Windows 7 and works with digital cameras and scanners. Unlike the TWAIN
driver, the WIA driver allows you to scan and easily adjust images without using
additional software:
Choose your scanning preferences and click Preview to see your
preferences affect the picture.
Scan and save your scanned image.
26
Scanning with Samsung Scan Assistant
• This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
The WIA driver works only on Windows OS (not supported Windows 2000)
with a USB port.
Make sure that the machine is connected to your computer and
powered on.
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 49).
Click Start > Control Panel > Hardware and Sound > Devices and
Printers.
Right-click on device driver icon in Printers and Faxes > Start Scan.
New Scan application appears.
• You can use the OCR (Optical Character Reader) feature from Samsung
Scan Assistant program.
Make sure that the machine is connected to your computer and
powered on.
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 49).
Click Start > All programs > Samsung Printers, and start Samsung
Scan Assistant.
Select the Help menu or click the
button from the window and click on
any option you want to know about.
4. Special Features
247
Scan features
•
Set the scan options.
Print: You can print images you have saved.
Click Scan.
Select the Help menu or click the
button from the window and click on
any option you want to know about.
27
Scanning with SmarThru 4
• This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
• You can use the OCR (Optical Character Reader) feature from SmarThru 4
program.
Make sure that the machine is connected to your computer and
powered on.
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 49).
Double-click the SmarThru 4 icon.
The SmarThru appears.
•
Scan to: You can scan an image and save it to an application or
folder, email it, or publish it on a web site.
•
Image: You can edit an image and send it to a selected application
or folder, email it, or publish it on a web site.
Click Scan to.
Select destination among Application, E-mail, Folder, OCR, or Web.
If needed, click Settings to customize the settings.
Click Scan.
28
Scanning with SmarThru Office
• This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
• To use SmarThru Office, you have to install the program manually from
the supplied CD. Select Advanced Installation > Custom Installation
and choose SmarThru Office to install.
• You can use the OCR (Optical Character Reader) feature from SmarThru
Office program.
4. Special Features
248
Scan features
Make sure that the machine is connected to your computer and
powered on.
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 49).
Double-click the SmarThru Office icon.
The SmarThru Office appears.
29
Macintosh scanning
Scanning from USB connected machine
Make sure that the machine is connected to your computer and
powered on.
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 49).
Start Applications and click Image Capture.
Click the Help or
button from the window and click on any option you
want to know about.
Click the SmarThru Office icon (
) in the tray area of the Windows
taskbar to activate the SmarThru Office launcher.
Click the scanning icon (
If No Image Capture device connected message appears, disconnect the
USB cable and reconnect it. If the problem continues, refer to the Image
Capture’s help.
) to open the scanning window.
The Scan Setting window opens.
Set scan settings and click Scan.
Select the option you want.
Scan and save your scanned image.
If scanning does not operate in Image Capture, update Mac OS to the latest
version. Image Capture operates properly in Mac OS X 10.4.7 or higher.
4. Special Features
249
Scan features
Scanning from network connected machine
•
If you want to scan using TWAIN, refer to the Mac OS X10.4 steps
above.
For 10.6 -10.7, select your device below SHARED.
Network or wireless model only (see "Features by models" on page 7).
Set the scan options on this program.
Make sure that your machine is connected to a network.
Start Applications and click Image Capture.
• For more information, refer to the Image Capture’s help.
According to OS, follow steps below.
• You can also scan using TWAIN-compliant software, such as Adobe
Photoshop.
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 49).
•
• If scanning does not operate in Image Capture, update Mac OS to the
latest version. Image Capture operates properly Mac OS X 10.4.7 or
higher.
For 10.4
Click Devices > Browse Devices on Menu bar.
Select your machine in Twain devices option. Make sure that Use
TWAIN software checkbox is checked.
Click Connect.
If a warning message appears, click Change Port.. to select port,
or If TWAIN UI appears, click Change Port.. from the Preference
tab and select a new port.
•
Scan and save your scanned image.
30
Linux scanning
Scanning
Make sure that the machine is connected to your computer and
powered on.
Double-click the Unified Driver Configurator on your desktop.
For 10.5
Click Devices > Browse Devices on Menu bar.
Make sure that Connected checkbox is checked beside your
machine in Bonjour Devices.
Click the
button to switch to Scanners Configuration.
4. Special Features
250
Scan features
Select the scanner on the list.
Click Properties.
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 49).
From the Scanner Properties window, click Preview.
The document is scanned and the image preview appears in the
Preview Pane.
Drag the pointer to set the image area to be scanned in the Preview
Pane.
10
11
Select the option you want.
Scan and save your scanned image.
For later use, you can save as your scan settings and add it to the Job Type
drop-down list.
4. Special Features
251
Scan features
Editing an image with Image Manager
The Image Manager application provides you with menu commands and tools
to edit your scanned image.
4. Special Features
252
Fax features
32
• For basic faxing features, refer to the Basic Guide (see "Basic faxing" on
page 64).
Redialing the fax number
• This function is not supported for SCX-340x/SCX-340xW Series (see
"Control panel overview" on page 24).
Press
(Redial/Pause) button on the control panel.
Select the fax number you want.
Ten recently sent fax numbers with ten received Caller IDs are shown.
31
Automatic redialing
When the number you have dialed is busy or there is no answer when you send
a fax, the machine automatically redials the number. The redial time depends on
the country's factory default setting.
When the display shows Retry Redial?, press
When an original is loaded in the document feeder, the machine
automatically begins to send.
If an original is placed on the scanner glass, select Yes to add another
page. Load another original and press OK. When you have finished,
select No when Another Page? appears.
(Start) button to redial the
33
number without waiting. To cancel the automatic redialing, press
(Cancel
or Stop/Clear).
To change the time interval between redials and the number of redial attempts.
Press
panel.
(fax) >
(Menu)> Fax Setup > Sending on the control
Confirming a transmission
When the last page of your original has been sent successfully, the machine
beeps and returns to ready mode.
When something goes wrong while sending your fax, an error message appears
on the display. If you receive an error message, press
Select Redial Times or Redial Term you want.
(Cancel or Stop/Clear)
to clear the message and try to send the fax again.
Select the option you want.
4. Special Features
253
Fax features
You can set your machine to print a confirmation report automatically each
time sending a fax is completed. Press
(fax) >
> Sending > Send Report on the control panel.
(Menu) > Fax Setup
Click Print or OK.
Enter the recipients’ numbers and select the option
34
Sending a fax in the computer
This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
You can send a fax from your computer without going to the machine.
To send a fax from your computer, the Samsung Network PC Fax program
must be installed. This program will be installed when you installed the printer
driver.
Open the document to be sent.
Select Print from the File menu.
The Print window will be displayed. It may look slightly different
depending on your application.
Select the Help menu or click the
button from the window and click on
any option you want to know about.
Click Send.
Select Samsung Network PC Fax from the Print window
4. Special Features
254
Fax features
35
Delaying a fax transmission
If you set a time earlier than the current time, the fax will be sent at that time
on the following day.
You can set your machine to send a fax at a later time when you will not be
present. You cannot send a color fax using this feature.
Place a single document face down on the document glass, or load the
documents face up into the document feeder.
Press
The original is scanned into memory before transmission.
The machine returns to ready mode. The display reminds you that you
are in ready mode and that a delayed fax is set.
(fax) on the control panel.
Adjust the resolution and the darkness to suit your fax needs.
You can check the list of delayed fax jobs.
Press
Press
(Menu) > System Setup > Report > Schedule Jobs on the
control panel.
(Menu) > Fax Feature > Delay Send on the control panel.
Or select Fax > Delayed Send > To on the touch screen.
Enter the job name and the time.
Enter the number of the receiving fax machine and press OK.
The display asks you to enter another fax number to send the document.
To enter more fax numbers, press OK when Yes highlights and repeat
steps 5.
• You can add up to 10 destinations.
• Once you entered a group dial number, you cannot enter another group
dial numbers anymore.
Adding documents to a reserved fax
Place a single document face down on the document glass, or load the
documents face up into the document feeder.
Press
panel.
Select the fax job and press OK.
(fax) >
(Menu) > Fax Feature > Add Page on the control
When you have finished, select No when Another Page? appears. The
machine scans the original into memory.
4. Special Features
255
Fax features
Press
(Cancel or Stop/Clear) to return to ready mode.
Canceling a reserved fax job
Press
panel.
(fax) >
Select the fax job you want and press OK.
Press
(Fax) >
control panel.
(Menu) > Fax Feature > Priority Send on the
Or select Fax > Priority Send > To on the touch screen.
Press OK when Yes highlights.
Press
Place a single document face down on the document glass, or load the
documents face up into the document feeder.
(Menu) > Fax Feature > Cancel Job on the control
The selected fax is deleted from memory.
(Stop/Clear) to return to ready mode.
Enter the destination fax number and press OK.
Enter the job name and press OK.
If an original is placed on the scanner glass, select Yes to add another
pages. Load another original and press OK.
When you have finished, select No when Another Page? appears.
The machine starts to scan and send a fax to destinations.
36
Sending a priority fax
This function is used when a high priority fax need to be sent ahead of reserved
operations. The original is scanned into memory and immediately transmitted
when the current operation is finished.
37
Forwarding a sentGfax to another destination
You can set the machine to forward the received or sent fax to other destination
by a fax, an email or a server. If you are out of office but have to receive the fax,
this feature may be useful.
4. Special Features
256
Fax features
38
• When you forward a fax by an email, you must first set the mail server and
IP address in SyncThru™ Web Service (seeG"Using SyncThru™ Web
Service" on page 270).
• Though you sent or received a color fax, the data is forwarded in
grayscale.
Place a single document face down on the document glass, or load the
documents face up into the document feeder.
Press
(fax) >
(Menu) > Fax Feature > Forward > Fax > Send
Forward > On on the control panel.
Forwarding a received fax
You can set the machine to forward the received or sent fax to other destination
by a fax, an email or a server. If you are out of office but have to receive the fax,
this feature may be useful.
Though you sent or received a color fax, the data is forwarded in grayscale.
Or select Setup > Machine Setup > Fax Setup > Forward > Fax, Email,
or Server > Send Forward > On on the touch screen.
Or select Setup > Machine Setup > Fax Setup > Forward > Fax, Email,
or Server > Receive Forward or RCV Forward > On on the touch
screen.
Forward options may not be available depending on model or optional
goods (see "Variety feature" on page 10).
Enter the destination fax number, email address, or server address and
press OK.
Press
Press
(fax) >
(Menu) > Fax Feature > Forward > Fax, E-mail, or
Server > Receive Forward or RCV Forward > Forward on the control
panel.
• Forward options may not be available depending on model or optional
goods (see "Variety feature" on page 10).
• To set the machine to print out a fax when fax forwarding has been
completed, select Forward&Print.
(Cancel or Stop/Clear) to return to ready mode.
Subsequent sent faxes will be forwarded to the specified fax machine.
Enter the destination fax number, email address, or server address and
press OK.
Enter the starting tim and ending time, then press OK.
4. Special Features
257
Fax features
Press
(Cancel or Stop/Clear) to return to ready mode.
Press OK.
Subsequent sent faxes will be forwarded to the specified fax machine.
40
Receiving a fax in the computer
39
Sending faxes on both sides of paper
• This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
• This is available only when you load originals into the document feeder.
• To use this feature, set the option on the control panel:
• Some menus may not appear on the display depending on options or
models. If so, it is not applicable to your machine.
Press
(fax) >
(Menu) > Fax Feature > Forward > PC > On the
control panel.
Or select Setup > Machine Setup > Next > Fax Setup > Forward > PC
> On on the touch screen.
• This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
Place a single document face down on the document glass, or load the
documents face up into the document feeder.
Press
(fax) > Duplex on the control panel.
Or select Fax > Select the menu you want > Select Duplex from the submenus > on the touch screen.
Open the Samsung Easy Printer Manager.
Select the appropriate machine from the Printer List.
Select Fax to PC Settings menu.
Use Enable Fax Receiving from Device to change the fax settings.
•
Off: Send faxes in normal mode.
•
2 Side: Send faxes on both sides of the original.
•
Image Type: Convert the received faxes to PDF or TIFF.
•
2->1Side ROT2: Send faxes on both sides of the original and prints
each one on a separate sheet, but the information on the back side
of the printout is rotated 180°.
•
Save Location: Select location to save the converted faxes.
•
Prefix: Select prefix.
4. Special Features
258
Fax features
•
Print received fax: After receiving the fax, set prints information for
the received fax.
•
Notify me when complete: Set to show the popup window to
notify receiving a fax.
•
Open with default application: After receiving the fax, open it with
default application.
•
None: After receiving a fax, the machine does not notify the user or
opens the application.
•
To use the Ans/Fax mode, attach an answering machine to the EXT socket
on the back of your machine.
•
Press Save > OK.
41
Changing the receive modes
Press
(fax) >
(Menu) > Fax Setup > Receiving > Receive Mode
on the control panel.
Or select Setup > Machine Setup > Next > Default Setting > Fax
Default > Common > Receive Mode on the touch screen.
Select the option you want.
•
Fax: Answers an incoming fax call and immediately goes into the fax
reception mode.
•
Tel: Receives a fax by pressing
Ans/Fax: Is for when an answering machine attached to your
machine. Your machine answers an incoming call, and the caller can
leave a message on the answering machine. If the fax machine
senses a fax tone on the line, the machine automatically switches to
Fax mode to receive the fax.
DRPD: You can receive a call using the Distinctive Ring Pattern
Detection (DRPD) feature. Distinctive Ring is a telephone company
service which enables an user to use a single telephone line to
answer several different telephone numbers. For further details, see
"Receiving faxes using DRPD mode" on page 260.
This setting may not be available depending on your country.
Press OK.
Press
(Cancel or Stop/Clear) to return to ready mode.
(On Hook Dial) and then
(Start) button.
4. Special Features
259
Fax features
42
44
Receiving manually in Tel mode
You can receive a fax call by pressing
pressing
(On Hook Dial) button and then
(Start) when you hear a fax tone. If your machine has a handset,
you can answer calls using the handset (see "Features by models" on page 7).
Receiving faxes with an extension telephone
When you are using an extension telephone connected to the EXT socket, you
can receive a fax from someone you are talking to on the extension telephone,
without going to the fax machine.
When you receive a call on the extension phone and hear fax tones, press the
keys *9* on the extension phone. The machine receives the fax.
43
Receiving in Answering Machine/Fax mode
To use this mode, you must attach an answering machine to the EXT socket on
the back of your machine. If the caller leaves a message, the answering machine
stores the message. If your machine detects a fax tone on the line, it
automatically starts to receive the fax.
• If you have set your machine to this mode and your answering machine
is switched off, or no answering machine is connected to EXT socket,
your machine automatically goes into Fax mode after a predefined
number of rings.
• If the answering machine has a user-selectable ring counter, set the
machine to answer incoming calls within 1 ring.
• If the machine is in Tel mode, disconnect or switch off the answering
machine with the fax machine. Otherwise, the outgoing message from
the answering machine will interrupt your phone conversation.
*9* is the remote receive code preset at the factory. The first and the last
asterisks are fixed, but you can change the middle number to whatever you
want.
While you are talking over the telephone connected to the EXT socket, copy
and scan features are not available.
45
Receiving faxes using DRPD mode
This setting may not be available depending on your country. Distinctive Ring is
a telephone company service which enables an user to use a single telephone
line to answer several different telephone numbers. This feature is often used by
answering services who answer telephones for many different clients and need
to know which number someone is calling in on to properly answer the phone.
4. Special Features
260
Fax features
46
This setting may not be available depending on your country.
Select
(fax) >
(Menu) > Fax Setup > Receiving > DRPD Mode
> Waiting Ring on the control panel.
Or select Setup > Machine Setup > Next > Default Setting > Fax
Default > Common > Receive Mode > DRPD on the touch screen.
Receiving in secure receiving mode
Call your fax number from another telephone.
This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
You may need to prevent your received faxes from being accessed by
unauthorized people. Turn on secure receiving mode, then all incoming faxes
go into memory. You can print the incoming faxes with entering the password.
When your machine begins to ring, do not answer the call. The machine
requires several rings to learn the pattern.
When the machine completes learning, the display shows Completed
DRPD Setup. If the DRPD setup fails, Error DRPD Ring appears.
To use the secure receiving mode, activate the menu from
(fax) >
(Menu) > Fax Feature > Secure Receive on the control panel.
Press OK when DRPD appears and start over from step 2.
Or select Setup > Machine Setup > Next > Fax Setup > Secure Receive on
the touch screen.
• DRPD must be set up again if you re-assign your fax number, or connect
the machine to another telephone line.
• After DRPD has been set up, call your fax number again to verify that the
machine answers with a fax tone. Then have a call placed to a different
number assigned to that same line to be sure the call is forwarded to the
extension telephone or answering machine plugged into the EXT socket.
Printing received faxes
Select
(fax) >
(Menu) > Fax Feature > Secure Receive > Print
on the control panel.
Or select Setup > Machine Setup > Next > Fax Setup > Secure Receive
> Print on the touch screen.
Enter a four-digit password and press OK.
4. Special Features
261
Fax features
•
The machine prints all of the faxes stored in memory.
Short Edge: Prints pages to be read by flipping like a note pad.
47
Printing faxes on both sides of the paper
• Some menus may not appear on the display depending on options or
models. If so, it is not applicable to your machine.
• This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
Place a single document face down on the document glass, or load the
documents face up into the document feeder.
Press
(fax) >
(Menu) > Fax Setup > Receiving > Duplex Print
on the control panel.
•
Off: Prints in Normal mode.
•
Long Edge: Prints pages to be read like a book.
Press OK.
Press
(Cancel or Stop/Clear) to return to ready mode.
48
Receiving faxes in memory
Since your machine is a multi-tasking device, it can receive faxes while you are
making copies or printing. If you receive a fax while you are copying or printing,
your machine stores incoming faxes in its memory. Then, as soon as you finish
copying or printing, the machine automatically prints the fax.
If fax is received and being printed, other copy and print jobs cannot be
processed at the same time.
4. Special Features
262
Fax features
49
Printing sent fax report automatically
You can set the machine to print a report with detailed information about the
previous 50 communication operations, including time and dates.
Press
(fax) >
control panel.
Press
(Menu) > Fax Setup > Auto Report > On on the
(Cancel or Stop/Clear) to return to ready mode.
4. Special Features
263
Using shared folder features
This feature allows you to use the machine’s memory as a shared folder. The
advantage of this feature is that you can conveniently use the shared folder
through your computer’s window.
• This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
• You can use this feature in the models that have a mass storage device
(see "Variety feature" on page 10).
51
Using the shared folder
You can use the shared folder in the same way exactly like the normal computer.
Create, edit and delete the folder or file as a normal Windows folder. You also
store the scanned data in the shared folder. You can directly print files stored on
a the shared folder. You can print TIFF, BMP, JPEG and PRN files.
• The administrator can set the ID and password to restrict the user’ s
access and also set the maximum number of simultaneous users.
50
Creating a shared folder
Open the Windows Explore window from the computer.
Enter the printer’s >>=KRaddress„ example:?? in
the address fieldSGand press the Enter key or click Go.
Create a new folder under nfsroot directory.
4. Special Features
264
Using memory/hard drive features
From the control panel
You can use this feature in the models that have a mass storage device
(HDD) or memory (see "Variety feature" on page 10).
If your machine has optional memory or an optional hard drive, you can use
these features from the
(Menu)button!System Setup> Job
Management.
52
Setting up the optional memory
From the printer driver
•
Active JobAll of the print jobs waiting to be printed are listed in the active
job queue in the order you sent them to the printer. You can delete a job
from the queue before printing, or promote a job to print sooner.
•
File PolicyYou can choose the file policy for generating file name before
you proceed with the job through optional memory. If the optional memory
already has the same name when you entered a new file name, you can
rename or overwrite it.
•
Stored Job: You can print or delete a stored job.
After installing the optional memory, you can use advanced printing features,
such as proofing a job and specifying of printing a private job in the Print
window. Select PropertiesorPreference, and configure the printing mode.
• Some menus may not appear on the display depending on options or
models. If so, it is not applicable to your machine.
• After installing the hard drive, you can also print the predefined
document templates from the
Form Menu.
(Menu) button > System Setup >
4. Special Features
265
5. Useful Management
Tools
This chapter introduces management tools provided to help you make full use of your machine.
• Easy Capture Manager
267
• Samsung AnyWeb Print
268
• Easy Eco Driver
269
• Using SyncThru™ Web Service
270
• Using Samsung Easy Printer Manager
273
• Using Samsung Printer Status
276
• Using Smart Panel
278
• Using the Linux Unified Driver Configurator
280
Easy Capture Manager
• This feature may not be available depending on model or optional goods (see "Software" on page 7).
• Available for Windows OS users only (see "Software" on page 7).
Capture your screen and launch Easy Capture Manager by simply pressing the Print Screen key. Now you can easily print your captured screen as captured or edited.
5. Useful Management Tools
267
Samsung AnyWeb Print
• This feature may not be available depending on model or optional goods (see "Software" on page 7).
• Available for Windows and Macintosh OS users only (see "Software" on page 7).
This tool helps you screen-capture, preview, scrap, and print Windows Internet Explorer pages more easily, than when you use an ordinary program. Click Start > All
programs > Samsung Printers > Samsung AnyWeb Print > Download the latest version to link to the website where the tool is available for download.
5. Useful Management Tools
268
Easy Eco Driver
• This feature may not be available depending on model or optional goods (see "Software" on page 7).
• Available for Windows OS users only (see "Software" on page 7).
With the Easy Eco Driver, you can apply Eco features to save paper and toner before printing. To use this application, Start Easy Eco Driver before printing job
checkbox in the printer properties should be checked.
Easy Eco Driver also allows you simple editing such as removing images and texts, changing fonts, and more. You can save frequently used settings as a preset.
How to use:
1 Open a document to print.
2 Print the document.
A preview window appears.
3 Select the options you want to apply to the document.
You can see the preview of the applied features.
4 Click Print.
5. Useful Management Tools
269
Using SyncThru™ Web Service
• Internet Explorer 6.0 or higher is the minimum requirement for
SyncThru™ Web Service.
• SyncThru™ Web Service explanation in this user’s guide may differ from
your machine depending on its options or models.
• Network model only (see "Software" on page 7).
Click Login on the upper right of the SyncThru™ Web Service website.
Type in the ID and Password then click Login.
•
ID: admin
•
Password: sec00000
SyncThru™ Web Service overview
Accessing SyncThru™ Web Service
Access a web browser, such as Internet Explorer, from Windows.
Enter the machine IP address of your printer (http://xxx.xxx.xxx.xxx) in
the address field and press the Enter key or click Go.
Some tabs may not appear depending on your model.
Your machine’s embedded website opens.
Logging into SyncThru™ Web Service
Before configuring options in SyncThru™ Web Service, you need to log-in as an
administrator. You can still use SyncThru™ Web Service without logging in but
you won’t have access to Settings tab and Security tab.
Information tab
This tab gives you general information about your machine. You can check
things, such as remaining amount of toner. You can also print reports, such as an
error report.
•
Active Alerts: Shows the alerts that have occurred in the machine and their
severity.
•
Supplies: Shows how many pages are printed and amount of toner left in
the cartridge.
5. Useful Management Tools
270
Using SyncThru™ Web Service
•
Usage Counters: Shows the usage count by print types: simplex and
duplex.
•
Current Settings: Shows the machine’s and network’s information.
•
Print information: Prints reports such as system related reports, e-mail
address, and font reports.
•
User Access Control: Classifies users into several groups according to each
user’s role. Each user’s authorization, authentication and accounting will be
controlled by the group’s role definition.
Maintenance tab
Settings tab
This tab allows you to maintain your machine by upgrading firmware and
setting contact information for sending emails. You can also connect to
Samsung website or download drivers by selecting the Link menu.
This tab allows you to set configurations provided by your machine and
network. You need to log-in as an administrator to view this tab.
•
Firmware Upgrade: Upgrade your machine’s firmware.
•
Contact Information: Shows the contact information.
•
Link: Shows links to useful sites where you can download or check
information.
•
Machine Settings tab: Sets options provided by your machine.
•
Network Settings tab: Shows options for the network environment. Sets
options such as TCP/IP and network protocols.
Security tab
This tab allows you to set system and network security information. You need to
log-in as an administrator to view this tab.
•
System Security: Sets the system administrator’s information and also
enables or disables machine features.
•
Network Security: Sets settings for HTTPs, IPSec, IPv4/IPv6 filtering, 802.1x,
and Authentication servers.
E-mail notification setup
You can receive emails about your machine’s status by setting this option. By
setting information such as IP address, host name, e-mail address and SMTP
server information, the machine status (toner cartridge shortage or machine
error) will be sent to a certain person's e-mail automatically. This option may be
used more frequently by a machine administrator.
5. Useful Management Tools
271
Using SyncThru™ Web Service
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine.
Start a web browser, such as Internet Explorer, from Windows.
Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address field
and press the Enter key or click Go.
If the firewall is activated, the e-mail may not be sent successfully. In that
case, contact the a network administrator.
Setting the system administrator’s information
This setting is necessary for using the e-mail notification option.
Your machine’s embedded website opens.
From the Settings tab, select Machine Settings > E-mail Notification.
If you have not configured outgoing server environment, go to Settings >
Network Settings > Outgoing Mail Server(SMTP) to configure network
environment before setting e-mail notification.
Click Add button to add e-mail notification user.
Click Apply.
Start a web browser, such as Internet Explorer, from Windows.
Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address field
and press the Enter key or click Go.
Select Enable check box to use the E-mail Notification.
Set the recipient name and e-mail address(es) with notification items
you want to receive an alert for.
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine.
Your machine’s embedded website opens.
Click Apply.
From the Security tab, select System Security > System Administrator
Enter the name of the administrator, phone number, location, and email
address.
5. Useful Management Tools
272
Using Samsung Easy Printer Manager
• This feature may not be available depending on model or optional goods
(see "Software" on page 7).
• Available for Windows and Macintosh OS users only (see "Software" on
page 7).
Open the Applications folder > Samsung folder > Samsung Easy Printer
Manager.
The Samsung Easy Printer Manager interface is comprised of various basic
sections as described in the table that follows:
• For Windows, Internet Explorer 6.0 or higher is the minimum
requirement for Samsung Easy Printer Manager.
The screenshot may differ depending on operating system you are using.
Samsung Easy Printer Manager is an application that combines Samsung
machine settings into one location. Samsung Easy Printer Manager combines
device settings as well as printing environments, settings/actions and
launching. All of these features provide a gateway to conveniently use your
Samsung machine. Samsung Easy Printer Manager provides two different user
interfaces for the user to choose from: the basic user interface and the advanced
user interface. Switching between the two interfaces is easy: just click a button.
Understanding Samsung Easy Printer Manager
To open the program:
For Windows,
Select Start > Programs or All Programs > Samsung Printers > Samsung
Easy Printer Manager > Samsung Easy Printer Manager.
For Macintosh,
Printer list
The Printer List displays printers installed on your
computer and network printers added by network
discovery (Windows only).
5. Useful Management Tools
273
Using Samsung Easy Printer Manager
Printer
information
Quick links
This area gives you general information about your
machine. You can check information, such as the machine’s
model name, IP address (or Port name), and machine
status.
If you connect your machine to a network, the
SyncThru™ Web Service icon is enabled.
You can view the online User’s Guide.
Troubleshooting button: This button opens the
Troubleshooting Guide when an error occurs.
You can directly open the necessary section in the
user’s guide.
Application
information
Displays Quick links to machine specific functions. This
section also includes links to applications in the advanced
settings.
Contents area
Displays information about the selected machine,
remaining toner level, and paper. The information will vary
based on the machine selected. Some machines do not
have this feature.
Order supplies
Click on the Order button from the supply ordering
window. You can order replacement toner cartridge(s)
from online.
Includes links for changing to the advanced settings,
preference, help, and about.
The
button is used to change the user
interface to the advanced settings user interface
(see "Advanced settings user interface overview"
on page 274).
Select the Help menu or click the
button from the window and click on
any option you want to know about.
Advanced settings user interface overview
The advanced user interface is intended to be used by the person responsible
for managing the network and machines.
5. Useful Management Tools
274
Using Samsung Easy Printer Manager
Fax to PC Settings
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine.
Device Settings
This menu includes settings related to the basic fax functionality of the selected
device.
•
Disable: If Disable is On, incoming faxes will not be received on this device.
•
Enable Fax Receiving from Device: Enables faxing on the device and allow
more options to be set.
You can configure various machine settings such as machine setup, paper,
layout, emulation, network, and print information.
Alert Settings (Windows only)
Scan to PC Settings
This menu includes settings related to error alerting.
This menu includes settings to create or delete scan to PC profiles.
•
Printer Alert: Provides settings related to when alerts will be received.
•
•
Email Alert: Provides options relating to receiving alerts via email.
•
Alert History: Provides a history of device and toner related alerts.
Scan Activation: Determines whether or not scanning is enabled on the
device.
•
Basic tab: Contains settings related general scan and deviceGsettings.
•
Image tab: Contains settings related to image altering.
Job Accounting
Provides querying of quota information of the specified job accounting user.
This quota information can be created and applied to devices by job accounting
software such as SyncThru™ or CounThru™ admin software.
5. Useful Management Tools
275
Using Samsung Printer Status
The Samsung Printer Status is a program that monitors and informs you of the
machine status.
Icon
• The Samsung Printer Status window and its contents shown in this user’s
guide may differ depending on the machine or operating system in use.
Mean
Normal
The machine is in ready mode and experiencing no
errors or warnings.
Warning
The machine is in a state where an error might occur in
the future. For example, it might be in toner low status,
which may lead to toner empty status.
Error
The machine has at least one error.
• Check the operating system(s) that are compatible with your machine
(see "Specifications" on page 106).
• Available for Windows OS users only (see "Software" on page 7).
Description
Samsung Printer Status overview
If an error occurs while operating, you can check the error from the Samsung
Printer Status. Samsung Printer Status is installed automatically when you install
the machine software.
You can also launch Samsung Printer Status manually. Go to the Printing
Preferences, click the Basic tab > Printer Status button.
These icons appear on the Windows task bar:
Toner Level
You can view the level of toner remaining in each
toner cartridge. The machine and the number of
toner cartridge(s) shown in the above window may
differ depending on the machine in use. Some
machines do not have this feature.
Option
You can set printing job alert related settings.
5. Useful Management Tools
276
Using Samsung Printer Status
Order Supplies
You can order replacement toner cartridge(s) from
online.
User’s Guide
You can view the online User’s Guide.
This button opens the Troubleshooting
Guide when an error occurs. You can directly
open the troubleshooting section in the
user’s guide.
Close
Close the window.
5. Useful Management Tools
277
Using Smart Panel
Smart Panel is a program that monitors and informs you of the machine’s status,
and allows you to customize the machine’s settings. You can download Smart
Panel from the Samsung website (see "Installing the Smart Panel" on page 136).
Toner Level
You can view the level of toner remaining in each toner
cartridge. The machine and the number of toner
cartridge(s) shown in the above window may differ
depending on the machine in use. If you cannot see
this feature, it is not applicable to your machine.
Buy Now
You can order replacement toner cartridge(s) from
online.
User’s Guide
You can view the online User’s Guide.
• The Smart Panel window and its contents shown in this user’s guide may
differ depending on the machine or operating system in use.
• Check the operating system(s) that are compatible with your machine
(see "Specifications" on page 106).
• The Smart Panel is available for Linux OS users only (see "Software" on
page 7).
This button opens the Troubleshooting
Guide when an error occurs. You can directly
open the troubleshooting section in the user’s
guide.
Smart Panel overview
If an error occurs while operating, you can check the error from the Smart Panel.
You can also launch Smart Panel manually.
Double-click the Smart Panel icon(
Printer Setting
You can configure various machine settings in the
Printer Settings Utility window. Some machines do not
have this feature.
) in the Notification Area.
If you connect your machine to a network, the
SyncThru™ Web Service window appears
instead of the Printer Settings Utility.
5. Useful Management Tools
278
Using Smart Panel
Changing Smart Panel’s settings
Right-click in Linux on the Smart Panel icon and select Configure smart panel.
Select the settings you want from the Configure smart panel window.
5. Useful Management Tools
279
Using the Linux Unified Driver Configurator
The Unified Driver Configurator is a tool primarily intended for configuring
machine devices. You need to install Unified Linux Driver to use Unified Driver
Configurator (see "Installation for Linux" on page 136).
After the driver is installed on your Linux system, the Unified Driver Configurator
icon will automatically be created on your desktop.
10
Opening Unified Driver Configurator
Double-click the Unified Driver Configurator on the desktop.
You can also click the Startup Menu icon and select Samsung Unified
Driver > Unified Driver Configurator.
Click each button on the left to switch to the corresponding
configuration window.
1 Printer Configuration
2 Port Configuration
5. Useful Management Tools
280
Using the Linux Unified Driver Configurator
Printers tab
To use the on screen help, the Help or
button from the window.
After changing the configurations, click Exit to close the Unified Driver
Configurator.
View the current system’s printer configuration by clicking on the machine icon
button on the left side of the Unified Driver Configurator window.
11
Printers configuration
Printers configuration has the two tabs: Printers and Classes.
Switches to Printers configuration.
Shows all of the installed machines.
Shows the status, model name, and URI of your machine.
5. Useful Management Tools
281
Using the Linux Unified Driver Configurator
The printer control buttons are, as follows:
•
Refresh: Renews the available machines list.
•
Add Printer: Allows you to add a new machines.
•
Remove Printer: Removes the selected machine.
•
Set as Default: Sets the current selected machine as a default machine.
•
Stop/Start: Stops/starts the machine.
•
Test: Allows you to print a test page to ensure the machine is working
properly.
•
Properties: Allows you to view and change the printer’s properties.
Classes tab
The Classes tab shows a list of available machine classes.
Shows all of the machine classes.
Shows the status of the class and the number of machines
in the class.
•
Refresh: Renews the classes list.
•
Add Class: Allows you to add a new machine class.
•
Remove Class: Removes the selected machine class.
5. Useful Management Tools
282
Using the Linux Unified Driver Configurator
12
Ports configuration
In this window, you can view the list of available ports, check the status of each
port and release a port that is stalled in a busy state when its owner has
terminated the job for any reason.
Switches to Ports configuration.
Shows all of the available ports.
Shows the port type, device connected to the port, and
status.
•
Refresh: Renews the available ports list.
•
Release port: Releases the selected port.
5. Useful Management Tools
283
6. Troubleshooting
This chapter gives helpful information for what to do if you encounter an error.
• Paper feeding problems
285
• Power and cable connecting problems
286
• Printing problems
287
• Printing quality problems
291
• Copying problems
299
• Scanning problems
300
• Faxing problems
302
• Operating system problems
304
Paper feeding problems
Condition
Suggested solutions
Paper jams during printing.
Clear the paper jam.
Paper sticks together.
• Check the maximum paper capacity of the tray.
• Make sure that you are using the correct type of paper.
• Remove paper from the tray and flex or fan the paper.
• Humid conditions may cause some paper to stick together.
Multiple sheets of paper do not feed.
Different types of paper may be stacked in the tray. Load paper of only one type, size, and weight.
Paper does not feed into the machine.
• Remove any obstructions from inside the machine.
• Paper has not been loaded correctly. Remove paper from the tray and reload it correctly.
• There is too much paper in the tray. Remove excess paper from the tray.
• The paper is too thick. Use only paper that meets the specifications required by the machine.
The paper keeps jamming.
• There is too much paper in the tray. Remove excess paper from the tray. If you are printing on special materials, use the
manual feeding in tray.
• An incorrect type of paper is being used. Use only paper that meets the specifications required by the machine.
• There may be debris inside the machine. Open the front cover and remove any debris.
Envelopes skew or fail to feed correctly.
Ensure that the paper guides are against both sides of the envelopes.
6. Troubleshooting
285
Power and cable connecting problems
Click this link to open an animation about solving power problems.
Condition
The machine is not receiving power,
or the connection cable between the
computer and the machine is not
connected properly.
Suggested solutions
• Connect the machine to the electricity supply first. If the machine has a
(Power) button on the control, press it.
• Disconnect the machine’s cable and reconnect it.
6. Troubleshooting
286
Printing problems
Condition
The machine does not
print.
Possible cause
The machine is not receiving power.
Suggested solutions
Connect the machine to the electricity supply first. If the machine has a
(Power)
button on the control, press it.
The machine is not selected as the default
machine.
Select your machine as your default machine in Windows.
Check the machine for the following:
• The cover is not closed. Close the cover.
• Paper is jammed. Clear the paper jam (see "Clearing paper jams" on page 94).
• No paper is loaded. Load paper (see "Loading paper in the tray" on page 41).
• The toner cartridge is not installed. Install the toner cartridge (see "Replacing the toner cartridge" on page 76).
• Make sure the protect cover and sheets are removed from the toner cartridge (see "Replacing the toner cartridge" on page 76).
If a system error occurs, contact your service representative.
The connection cable between the computer and
the machine is not connected properly.
Disconnect the machine cable and reconnect it (see "Rear view" on page 23).
The connection cable between the computer and
the machine is defective.
If possible, attach the cable to another computer that is working properly and print a job.
You can also try using a different machine cable.
The port setting is incorrect.
Check the Windows printer settings to make sure that the print job is sent to the correct
port. If the computer has more than one port, make sure that the machine is attached to
the correct one.
6. Troubleshooting
287
Printing problems
Condition
Possible cause
Suggested solutions
The machine may be configured incorrectly.
Check the Printing Preferences to ensure that all of the print settings are correct.
The printer driver may be incorrectly installed.
Uninstall and reinstall the machine’s driver.
The machine is malfunctioning.
Check the display message on the control panel to see if the machine is indicating a
system error. Contact a service representative.
The document size is so big that the hard disk
space of the computer is insufficient to access the
print job.
Get more hard disk space and print the document again.
The output tray is full.
Once the paper is removed from the output tray, the machine resumes printing.
The machine selects print
materials from the wrong
paper source.
The paper option that was selected in the
Printing Preferences may be incorrect.
For many software applications, the paper source selection is found under the Paper tab
within the Printing Preferences (see "Opening printing preferences" on page 54).
Select the correct paper source. See the printer driver help screen (see "Using help" on
page 55).
A print job is extremely
slow.
The job may be very complex.
Reduce the complexity of the page or try adjusting the print quality settings.
Half the page is blank.
The page orientation setting may be incorrect.
Change the page orientation in your application (see "Opening printing preferences" on
page 54). See the printer driver help screen (see "Using help" on page 55).
The paper size and the paper size settings do not
match.
Ensure that the paper size in the printer driver settings matches the paper in the tray.
The machine cable is loose or defective.
Disconnect the machine cable and reconnect. Try a print job that you have already
printed successfully. If possible, attach the cable and the machine to another computer
that you know works and try a print job. Finally, try a new machine cable.
The machine does not
print.
The machine prints, but
the text is wrong,
garbled, or incomplete.
Or, ensure that the paper size in the printer driver settings matches the paper selection
in the software application settings you use (see "Opening printing preferences" on
page 54).
6. Troubleshooting
288
Printing problems
Condition
Pages print, but they are
blank.
Possible cause
Suggested solutions
The wrong printer driver was selected.
Check the application’s printer selection menu to ensure that your machine is selected.
The software application is malfunctioning.
Try printing a job from another application.
The operating system is malfunctioning.
Exit Windows and reboot the computer. Turn the machine off and back on again.
The toner cartridge is defective or out of toner.
Redistribute the toner, if necessary.
If necessary, replace the toner cartridge.
• See "Redistributing toner" on page 74.
• See "Replacing the toner cartridge" on page 76.
The file may have blank pages.
Check the file to ensure that it does not contain blank pages.
Some parts, such as the controller or the board,
may be defective.
Contact a service representative.
The machine does not
print PDF files correctly.
Some parts of graphics,
text, or illustrations are
missing.
Incompatibility between the PDF file and the
Acrobat products.
Printing the PDF file as an image may enable the file to print. Turn on Print As Image
from the Acrobat printing options.
The print quality of
photos is not good.
Images are not clear.
The resolution of the photo is very low.
Reduce the photo size. If you increase the photo size in the software application, the
resolution will be reduced.
Before printing, the
machine emits vapor near
the output tray.
Using damp paper can cause vapor during
printing.
This is not a problem. Just keep printing.
It will take longer to print when you print a PDF file as an image.
6. Troubleshooting
289
Printing problems
Condition
Possible cause
Suggested solutions
The machine does not
print special-sized paper,
such as billing paper.
Paper size and paper size setting do not match.
Set the correct paper size in the Custom in Paper tab in Printing Preferences (see
"Opening printing preferences" on page 54).
The printed billing paper
is curled.
The paper type setting does not match.
Change the printer option and try again. Go to Printing Preferences, click Paper tab,
and set type to Thick (see "Opening printing preferences" on page 54).
6. Troubleshooting
290
Printing quality problems
If the inside of the machine is dirty or paper has been loaded improperly, there
might be a reduction in print quality. See the table below to clear the problem.
Condition
Light or faded print
Suggested solutions
• If a vertical white streak or faded area appears on the page, the toner supply is low. Install a new toner cartridge (see "Replacing the
toner cartridge" on page 76).
• The paper may not meet paper specifications; for example, the paper may be too moist or rough.
• If the entire page is light, the print resolution setting is too low or the toner save mode is on. Adjust the print resolution and turn
the toner save mode off. See the help screen of the printer driver.
• A combination of faded or smeared defects may indicate that the toner cartridge needs cleaning. Clean the inside of your machine
(see "Cleaning the machine" on page 80).
• The surface of the LSU part inside the machine may be dirty. Clean the inside of your machine (see "Cleaning the machine" on page
80). If these steps do not correct the problem, contact a service representative.
The top half of the paper is
printed lighter than the rest of
the paper
The toner might not adhere properly to this type of paper.
• Change the printer option and try again. Go to Printing Preferences, click the Paper tab, and set the paper type to Recycled (see
"Opening printing preferences" on page 54).
6. Troubleshooting
291
Printing quality problems
Condition
Toner specks
Suggested solutions
• The paper may not meet specifications; for example, the paper may be too moist or rough.
• The transfer roller may be dirty. Clean the inside of your machine (see "Cleaning the machine" on page 80).
A aB bC c
A aB bC c
A aB bC c
A aB bC c
A aB bC c
Dropouts
• The paper path may need cleaning. Contact a service representative (see "Cleaning the machine" on page 80).
If faded areas, generally rounded, occur randomly on the page:
• A single sheet of paper may be defective. Try reprinting the job.
A aBb C
A aBb C
A aBb C
A aBb C
A aBb C
• The moisture content of the paper is uneven or the paper has moist spots on its surface. Try a different brand of paper.
• The paper lot is bad. The manufacturing processes can cause some areas to reject toner. Try a different kind or brand of paper.
• Change the printer option and try again. Go to Printing Preferences, click the Paper tab, and set type to Thick (see "Opening
printing preferences" on page 54).
If these steps do not correct the problem, contact a service representative.
White Spots
If white spots appear on the page:
• The paper is too rough and a lot of dirt from paper falls to the inner components within the machine, so the transfer roller may be
dirty. Clean the inside of your machine (see "Cleaning the machine" on page 80).
• The paper path may need cleaning. Clean the inside of your machine (see "Cleaning the machine" on page 80).
If these steps do not correct the problem, contact a service representative.
6. Troubleshooting
292
Printing quality problems
Condition
Vertical lines
Suggested solutions
If black vertical streaks appear on the page:
• The surface (drum part) of the toner cartridge inside the machine has probably been scratched. Remove the toner cartridge and
install a new one (see "Replacing the toner cartridge" on page 76).
If white vertical streaks appear on the page:
• The surface of the LSU part inside the machine may be dirty. Clean the inside of your machine (see "Cleaning the machine" on page
80). If these steps do not correct the problem, contact a service representative.
Black or color background
If the amount of background shading becomes unacceptable:
• Change to a lighter weight paper.
• Check the environmental conditions: very dry conditions or a high level of humidity (higher than 80% RH) can increase the amount
of background shading.
• Remove the old toner cartridge and install a new one (see "Replacing the toner cartridge" on page 76).
• Thoroughly redistribute the toner (see "Redistributing toner" on page 74).
Toner smear
• Clean the inside of the machine (see "Cleaning the machine" on page 80).
• Check the paper type and quality.
• Remove the toner cartridge and install a new one (see "Replacing the toner cartridge" on page 76).
6. Troubleshooting
293
Printing quality problems
Condition
Vertical repetitive defects
Suggested solutions
If marks repeatedly appear on the printed side of the page at even intervals:
• The toner cartridge may be damaged. If you still have the same problem, remove the toner cartridge and, install a new one (see
"Replacing the toner cartridge" on page 76).
• Parts of the machine may have toner on them. If the defects occur on the back of the page, the problem will likely correct itself after
a few more pages.
• The fusing assembly may be damaged. Contact a service representative.
Background scatter
Background scatter results from bits of toner randomly distributed on the printed page.
• The paper may be too damp. Try printing with a different batch of paper. Do not open packages of paper until necessary so that
the paper does not absorb too much moisture.
• If background scatter occurs on an envelope, change the printing layout to avoid printing over areas that have overlapping seams
on the reverse side. Printing on seams can cause problems.
Or select Thick from the Printing Preferences window (see "Opening printing preferences" on page 54).
• If background scatter covers the entire surface area of a printed page, adjust the print resolution through your software application
or in Printing Preferences (see "Opening printing preferences" on page 54). Ensure the correct paper type is selected. For example:
If Thicker Paper is selected, but Plain Paper actually used, an overcharging can occur causing this copy quality problem.
• If you are using a new toner cartridge, redistribute the toner first (see "Redistributing toner" on page 74).
Toner particles are around bold
characters or pictures
The toner might not adhere properly to this type of paper.
• Change the printer option and try again. Go to Printing Preferences, click the Paper tab, and set the paper type to Recycled (see
"Opening printing preferences" on page 54).
• Ensure the correct paper type is selected. For example: If Thicker Paper is selected, but Plain Paper actually used, an overcharging
can occur causing this copy quality problem.
6. Troubleshooting
294
Printing quality problems
Condition
Suggested solutions
Misformed characters
• If characters are improperly formed and producing hollow images, the paper stock may be too slick. Try different paper.
Page skew
• Ensure that the paper is loaded properly.
A aBb
A aBb C
A aBb C
A aBb C
A aBb C
Cc
Curl or wave
• Check the paper type and quality.
• Ensure that the guides are not too tight or too loose against the paper stack.
• Ensure that the paper is loaded properly.
• Check the paper type and quality. Both high temperature and humidity can cause paper curl.
• Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray.
6. Troubleshooting
295
Printing quality problems
Condition
Wrinkles or creases
Suggested solutions
• Ensure that the paper is loaded properly.
• Check the paper type and quality.
• Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray.
Back of printouts are dirty
• Check for leaking toner. Clean the inside of the machine (see "Cleaning the machine" on page 80).
Solid color or black pages
• The toner cartridge may not be installed properly. Remove the cartridge and reinsert it.
• The toner cartridge may be defective. Remove the toner cartridge and install a new one (see "Replacing the toner cartridge" on
page 76).
• The machine may require repairing. Contact a service representative.
6. Troubleshooting
296
Printing quality problems
Condition
Loose toner
Suggested solutions
• Clean the inside of the machine (see "Cleaning the machine" on page 80).
• Check the paper type and quality.
• Remove the toner cartridge and then, install a new one (see "Replacing the toner cartridge" on page 76).
If the problem persists, the machine may require repair. Contact a service representative.
Character voids
Character voids are white areas within parts of characters that should be solid black:
• You may be printing on the wrong surface of the paper. Remove the paper and turn it around.
Horizontal stripes
• The paper may not meet paper specifications.
If horizontally aligned black streaks or smears appear:
• The toner cartridge may be installed improperly. Remove the cartridge and reinsert it.
• The toner cartridge may be defective. Remove the toner cartridge and install a new one (see "Replacing the toner cartridge" on
page 76).
If the problem persists, the machine may require repairing. Contact a service representative.
6. Troubleshooting
297
Printing quality problems
Condition
Curl
Suggested solutions
If the printed paper is curled or paper does not feed into the machine:
• Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray.
• Change the printer’s paper option and try again. Go to Printing Preferences, click the Paper tab, and set type to Thin (see
"Opening printing preferences" on page 54).
• An unknown image
repetitively appears on a few
sheets
Your machine is probably being used at an altitude of 1,000 m (3,281 ft) or above.
The high altitude may affect the print quality, such as loose toner or light imaging. Change the altitude setting for your machine (see
"Altitude adjustment" on page 219).
• Loose toner
• Light printGor contamination
occurs
6. Troubleshooting
298
Copying problems
Condition
Suggested solutions
Copies are too light or too dark. Adjust the darkness in copy feature to lighten or darken the backgrounds of copies (see "Changing the settings for each copy" on page
58).
Smears, lines, marks, or spots
appear on copies.
• If the defects are on the original, adjust darkness in copy feature to lighten the background of your copies.
Copy image is skewed.
• Ensure that the original is aligned with the registration guide.
• If there are no defects on the original, clean the scan unit (see "Cleaning the scan unit" on page 84).
• The transfer roller may be dirty. Clean the inside of your machine (see "Cleaning the machine" on page 80).
Blank copies print out.
Ensure that the original is face down on the scanner glass or face up in the document feeder.
If these steps do not correct the problem, contact a service representative.
Image rubs off the copy easily.
• Replace the paper in the tray with paper from a new package.
• In high humidity areas, do not leave paper in the machine for extended periods of time.
Frequent copy paper jams
occur.
• Fan the paper, then turn it over in the tray. Replace the paper in the tray with a fresh supply. Check/adjust the paper guides, if
necessary.
• Ensure that the paper is the proper type and weight (see "Print media specifications" on page 109).
• Check for copy paper or pieces of copy paper remaining in the machine after a paper jam has been cleared.
Toner cartridge produces fewer
copies than expected before
running out of toner.
• Your originals may contain pictures, solids, or heavy lines. For example, your originals may be forms, newsletters, books, or other
documents that use more toner.
• The scanner lid may be left open while copies are being made.
• Turn the machine off and back on.
6. Troubleshooting
299
Scanning problems
Condition
The scanner does not work.
Suggested solutions
• Make sure that you place the original to be scanned face down on the scanner glass, or face up in the document feeder (see
"Loading originals" on page 49).
• There may not be enough available memory to hold the document you want to scan. Try the Prescan function to see if that works.
Try lowering the scan resolution rate.
• Check that the machine printer cable is connected properly.
• Make sure that the machine printer cable is not defective. Switch the printer cable with a known good cable. If necessary, replace
the printer cable.
• Check that the scanner is configured correctly. Check scan setting in the SmarThru Office or the application you want to use to make
certain that the scanner job is being sent to the correct port (for example, USB001).
The unit scans very slowly.
• Check if the machine is printing received data. If so, scan the document after the received data has been printed.
• Graphics are scanned more slowly than text.
• Communication speed slows in scan mode because of the large amount of memory required to analyze and reproduce the scanned
image. Set your computer to the ECP printer mode through BIOS setting. It will help to increase the speed. For details about how
to set BIOS, refer to your computer user’s guide.
6. Troubleshooting
300
Scanning problems
Condition
Suggested solutions
Message appears on your
computer screen:
• There may be a copying or printing job in progress. Try your job again when that job is finished.
• Device can’t be set to the H/W
mode you want.
• The machine printer cable may be improperly connected or the power may be off.
• Port is being used by another
program.
• Ensure that the machine is properly connected and the power is on, then restart your computer.
• Port is disabled.
• The selected port is currently being used. Restart your computer and try again.
• The scanner driver is not installed or the operating environment is not set up properly.
• The USB cable may be improperly connected or the power may be off.
• Scanner is busy receiving or
printing data. When the
current job is completed, try
again.
• Invalid handle.
• Scanning has failed.
6. Troubleshooting
301
Faxing problems
Condition
Suggested solutions
The machine is not working,
there is no display, or the
buttons are not working.
• Unplug the power cord and plug it in again.
No dial tone.
• Check that the phone line is properly connected (see "Rear view" on page 23).
• Ensure that there is power being supplied to the electrical outlet.
• Ensure that the power is turned on.
• Check that the phone socket on the wall is working by plugging in another phone.
The numbers stored in memory
do not dial correctly.
Make sure that the numbers are stored in memory correctly. To check that, print an address book list.
The original does not feed into
the machine.
• Make sure that the paper is not wrinkled and you are inserting it in correctly. Check that the original is the right size, not too thick
or thin.
• Make sure that the document feeder is firmly closed.
• The document feeder rubber pad may need to be replaced. Contact a service representative (see "Available maintenance parts" on
page 71).
Faxes are not received
automatically.
• The receiving mode should be set to fax (see "Changing the receive modes" on page 259).
• Make sure that there is paper in the tray (see "Print media specifications" on page 109).
• Check to see if the display shows any error message. If it does, clear the problem.
The machine does not send.
• Make sure that the original is loaded in the document feeder or on the scanner glass.
• Check the fax machine you are sending to, to see if it can receive your fax.
The incoming fax has blank
spaces or is of poor-quality.
• The fax machine sending you the fax may be faulty.
• A noisy phone line can cause line errors.
• Check your machine by making a copy.
• A toner cartridge has almost reached its estimated cartridge life. Replace the toner cartridge (see "Replacing the toner cartridge"
on page 76).
6. Troubleshooting
302
Faxing problems
Condition
Suggested solutions
Some of the words on an
incoming fax are stretched.
The fax machine sending the fax had a temporary document jam.
There are lines on the originals
you sent.
Check your scan unit for marks and clean it (see "Cleaning the scan unit" on page 84).
The machine dials a number,
but the connection with the
other fax machine fails.
The other fax machine may be turned off, out of paper, or cannot answer incoming calls. Speak with the other machine operator and
ask them to solve the problem on their side.
Faxes do not store in memory.
There may not be enough memory space to store the fax. If the display indicating the memory status shows, delete any faxes you no
longer need from the memory, and then try to store the fax again. Call for service.
Blank areas appear at the
bottom of each page or on
other pages, with a small strip
of text at the top.
You may have chosen the wrong paper settings in the user option setting. Check the paper size and type again.
6. Troubleshooting
303
Operating system problems
Common Windows problems
Condition
Suggested solutions
“File in Use” message appears
during installation.
Exit all software applications. Remove all software from the startup group, then restart Windows. Reinstall the printer driver.
“General Protection Fault”,
“Exception OE”, “Spool 32”, or
“Illegal Operation” messages
appear.
Close all other applications, reboot Windows and try printing again.
“Fail To Print”, “A printer
timeout error occurred”
message appear.
These messages may appear during printing. Just keep waiting until the machine finishes printing. If the message appears in ready
mode or after printing has completed, check the connection and/or whether an error has occurred.
Refer to the Microsoft Windows User’s Guide that came with your computer for further information on Windows error messages.
6. Troubleshooting
304
Operating system problems
Common Macintosh problems
Condition
The machine does not print PDF files
correctly. Some parts of graphics, text, or
illustrations are missing.
Suggested solutions
Printing the PDF file as an image may enable the file to print. Turn on Print As Image from the Acrobat printing options.
It will take longer to print when you print a PDF file as an image.
Some letters are not displayed normally
during cover page printing.
Mac OS cannot create the font while printing the cover page. The English alphabet and numbers are displayed normally on
the cover page.
When printing a document in Macintosh
with Acrobat Reader 6.0 or higher, colors
print incorrectly.
Make sure that the resolution setting in your machine driver matches the one in Acrobat Reader.
Refer to the Macintosh User’s Guide that came with your computer for further information on Macintosh error messages.
6. Troubleshooting
305
Operating system problems
Common Linux problems
Condition
The machine does not print.
Suggested solutions
• Check if the printer driver is installed in your system. Open Unified Driver Configurator and switch to the Printers tab in the
Printers configuration window to look at the list of available machines. Make sure that your machine is displayed on the list. If
not, open Add new printer wizard to set up your device.
• Check if the machine is started. Open Printers configuration and select your machine from the printers list. Look at the
description in the Selected printer pane. If its status contains Stopped, press the Start button. Normal operation of the machine
should be restored. The “stopped” status might be activated when some problems in printing occur.
• Check if your application has special print options such as “-oraw”. If “-oraw” is specified in the command line parameter, then
remove it to print properly. For Gimp front-end, select “print” -> “Setup printer” and edit the command line parameter in the
command item.
Some color images come out all
black.
This is a known bug in Ghostscript (until GNU Ghostscript version 7.05) when the base color space of the document is indexed color
space and it is converted through CIE color space. Because Postscript uses CIE color space for Color Matching System, you should
upgrade Ghostscript on your system to at least GNU Ghostscript version 7.06 or later. You can find recent Ghostscript versions at
www.ghostscript.com.
Some color images come out in
unexpected color.
This is a known bug in Ghostscript (until GNU Ghostscript version 7.xx) when the base color space of the document is indexed RGB
color space and it is converted through CIE color space. Because Postscript uses CIE color space for Color Matching System, you
should upgrade Ghostscript on your system to at least GNU Ghostscript version 8.xx or later. You can find recent Ghostscript versions
at www.ghostscript.com.
The machine does not print
whole pages, and output is
printed on half the page.
It is a known problem that occurs when a color machine is used on version 8.51 or earlier of Ghostscript, 64-bit Linux OS, and has been
reported to bugs.ghostscript.com as Ghostscript Bug 688252.The problem is solved in AFPL Ghostscript v. 8.52 or above. Download
the latest version of AFPL Ghostscript from http://sourceforge.net/projects/ghostscript/ and install it to solve this problem.
6. Troubleshooting
306
Operating system problems
Condition
I cannot scan via Gimp Frontend.
Suggested solutions
Check if Gimp Front-end has Xsane:Device dialog. on the Acquire menu. If not, you should install Xsane plug-in for Gimp on the your
computer. You can find Xsane plug-in package for Gimp on Linux distribution CD or Gimp home page. For the detailed information,
refer to the Help for Linux distribution CD or Gimp Front-end application.
If you wish to use another kind of scan application, refer to application’s Help.
“Cannot open port device file”
error message appears when
printing a document.
Avoid changing print job parameters (e.q., via LPR GUI) while a print job is in progress. Known versions of CUPS server break the print
job whenever print options are changed and then try to restart the job from the beginning. Since Unified Linux Driver locks the port
while printing, the abrupt termination of the driver keeps the port locked and unavailable for subsequent print jobs. If this situation
occurs, try to release the port by selecting Release port in the Port configuration window.
The machine does not appear
on the scanners list.
• Ensure your machine is attached to your computer, connected properly via the USB port, and is turned on.
• Ensure the scanner driver for your machine is installed in your system. Open Unified Linux Driver configurator, switch to Scanners
configuration, then press Drivers. Make sure that driver with a name corresponding to your machine's name is listed in the
window.
• Ensure the port is not busy. Since functional components of machine (printer and scanner) share the same I/O interface (port), the
situation of simultaneous access of different user applications to the same port is possible. To avoid possible conflicts, only one of
them at a time is allowed to gain control over the device. The other user will encounter “device busy” response. This usually
happens when starting a scan procedure. An appropriate message box appears.
To identify the source of the problem, open the Ports configuration and select the port assigned to your scanner, port's symbol /
dev/mfp0 corresponds to LP:0 designation displayed in the scanners’ options, /dev/mfp1 relates to LP:1, and so on. USB ports start
at /dev/mfp4, so scanner on USB:0 relates to /dev/mfp4 respectively and so forth sequentially. In the Selected port pane, you can
see if the port is occupied by another application. If this is the case, you should either wait for completion of the current job or
press the Release port button, if you are sure that the present port application is not functioning properly.
The machine does not scan.
• Ensure a document is loaded into the machine, ensure your machine is connected to the computer.
• If there is an I/O error while scanning.
6. Troubleshooting
307
Operating system problems
Refer to the Linux User’s Guide that came with your computer for further information on Linux error messages.
Common PostScript problems
The following situations are PS language specific and may occur when several printer languages are used.
Problem
The PostScript file cannot be
printed
Possible cause
The PostScript driver may not be installed
correctly.
Solution
• Install the PostScript driver (see "Software Installation" on page 133).
• Print a configuration page and verify that the PS version is available for
printing.
• If the problem persists, contact a service representative.
Limit Check Error report prints
The print job was too complex.
You might need to reduce the complexity of the page or install more memory.
A PostScript error page prints
The print job may not be PostScript.
Make sure that the print job is a PostScript job. Check to see whether the software
application expected a setup or PostScript header file to be sent to the machine.
The optional tray is not
selected in the driver
The printer driver has not been configured to
recognize the optional tray.
Open the PostScript driver properties, select the Device Options tab, and set the
tray option.
When printing a document in
Macintosh with Acrobat Reader
6.0 or higher, colors print
incorrectly
The resolution setting in the printer driver may
not be matched with the one in Acrobat Reader.
Make sure that the resolution setting in your printer driver matches the one in
Acrobat Reader.
6. Troubleshooting
308
Contact SAMSUNG worldwide
If you have any comments or questions regarding Samsung products, contact
the Samsung customer care center.
Country/Region
Customer Care Center
Web Site
ALBANIA
42 27 5755
www.samsung.com
ARGENTINE
0800-333-3733
www.samsung.com
ARMENIA
0-800-05-555
www.samsung.com
AUSTRALIA
1300 362 603
www.samsung.com
AUSTRIA
0810-SAMSUNG (7267864, €
0.07/min)
www.samsung.com
AZERBAIJAN
088-55-55-555
www.samsung.com
BAHRAIN
8000-4726
www.samsung.com
BELARUS
810-800-500-55-500
www.samsung.com
BELGIUM
02-201-24-18
www.samsung.com/be
(Dutch)
Country/Region
Customer Care Center
Web Site
CAMEROON
7095-0077
www.samsung.com
CANADA
1-800-SAMSUNG (726-7864)
www.samsung.com/ca
www.samsung.com/
ca_fr (French)
CHILE
800-SAMSUNG (726-7864)
www.samsung.com
From mobile 02-482 82 00
CHINA
400-810-5858
www.samsung.com
COLOMBIA
01-8000112112
www.samsung.com
COSTA RICA
0-800-507-7267
www.samsung.com
COTE D’LVOIRE
8000 0077
www.samsung.com
CROATIA
062 SAMSUNG (062 726 7864)
www.samsung.com
CYPRUS
8009 4000 only from landline
www.samsung.com
CZECH REPUBLIC
800-SAMSUNG (800-726786)
www.samsung.com
www.samsung.com/
be_fr (French)
Samsung Electronics Czech and Slovak, s.r.o., Oasis Florenc,
Sokolovská 394/17, 180 00, Praha 8
BOLIVIA
800-10-7260
www.samsung.com
DENMARK
70 70 19 70
www.samsung.com
BOSNIA
05 133 1999
www.samsung.com
DOMINICA
1-800-751-2676
www.samsung.com
BRAZIL
0800-124-421
www.samsung.com
ECUADOR
1-800-10-7267
www.samsung.com
EGYPT
08000-726786
www.samsung.com
4004-0000
BULGARIA
07001 33 11
www.samsung.com
Contact SAMSUNG worldwide
309
Contact SAMSUNG worldwide
Country/Region
Customer Care Center
Web Site
EIRE
0818 717100
www.samsung.com
EL SALVADOR
800-6225
www.samsung.com
ESTONIA
800-7267
www.samsung.com
FINLAND
030-6227 515
www.samsung.com
FRANCE
01 48 63 00 00
www.samsung.com
GERMANY
01805 - SAMSUNG (726-7864 €
0,14/min)
www.samsung.com
GEORGIA
8-800-555-555
www.samsung.com
GHANA
0800-10077
www.samsung.com
Country/Region
INDIA
Customer Care Center
1800 1100 11
Web Site
www.samsung.com
3030 8282
1800 3000 8282
1800 266 8282
INDONESIA
0302-200077
GREECE
80111-SAMSUNG (80111 726
7864) only from land line
www.samsung.com
(+30) 210 6897691 from mobile
and land line
0800-112-8888
www.samsung.com
021-5699-7777
IRAN
021-8255
www.samsung.com
ITALY
800-SAMSUNG (726-7864)
www.samsung.com
JAMAICA
1-800-234-7267
www.samsung.com
JAPAN
0120-327-527
www.samsung.com
JORDAN
800-22273
www.samsung.com
KAZAKHSTAN
8-10-800-500-55-500 (GSM:7799) www.samsung.com
KENYA
0800 724 000
www.samsung.com
GUATEMALA
1-800-299-0013
www.samsung.com
KOSOVO
+381 0113216899
www.samsung.com
HONDURAS
800-27919267
www.samsung.com
KUWAIT
183-2255
www.samsung.com
HONG KONG
(852) 3698-4698
www.samsung.com/hk
KYRGYZSTAN
00-800-500-55-500
www.samsung.com
www.samsung.com/
hk_en/
LATVIA
8000-7267
www.samsung.com
LITHUANIA
8-800-77777
www.samsung.com
LUXEMBURG
261 03 710
www.samsung.com
HUNGARY
06-80-SAMSUNG (726-7864)
www.samsung.com
Contact SAMSUNG worldwide
310
Contact SAMSUNG worldwide
Country/Region
Customer Care Center
Web Site
MALAYSIA
1800-88-9999
www.samsung.com
MACEDONIA
023 207 777
www.samsung.com
MEXICO
01-800-SAMSUNG (726-7864)
www.samsung.com
MOLDOVA
00-800-500-55-500
www.samsung.com
MONGOLIA
Country/Region
PHILIPPINES
020 405 888
www.samsung.com
MOROCCO
080 100 2255
www.samsung.com
NIGERIA
0800-726-7864
www.samsung.com
NETHERLANDS
0900-SAMSUNG (0900-7267864)
(€ 0,10/min)
www.samsung.com
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
www.samsung.com
NICARAGUA
00-1800-5077267
www.samsung.com
NORWAY
815-56 480
www.samsung.com
OMAN
800-SAMSUNG (726-7864)
www.samsung.com
PANAMA
800-7267
www.samsung.com
PERU
0-800-777-08
www.samsung.com
1-800-10-SAMSUNG(726-7864)
for PLDT
Web Site
www.samsung.com
1-800-3-SAMSUNG(726-7864) for
Digitel
1-800-8-SAMSUNG(726-7864) for
Globe
www.samsung.com
MONTENEGRO
Customer Care Center
02-5805777
POLAND
0 801-1 SAMSUNG (172-678)
www.samsung.com
+48 22 607-93-33
PORTUGAL
808 20-SAMSUNG (808 20 7267)
www.samsung.com
PUERTO RICO
1-800-682-3180
www.samsung.com
ROMANIA
08010 SAMSUNG (08010 726
7864) only from landline
www.samsung.com
(+40) 21 206 01 10 from mobile
and land line
RUSSIA
8-800-555-55-55
www.samsung.com
SAUDI ARABIA
9200-21230
www.samsung.com
SENEGAL
800-00-0077
www.samsung.com
SERBIA
0700 SAMSUNG (0700 726 7864)
www.samsung.com
SINGAPORE
1800-SAMSUNG (726-7864)
www.samsung.com
SLOVAKIA
0800-SAMSUNG (0800-726-7864) www.samsung.com
Contact SAMSUNG worldwide
311
Contact SAMSUNG worldwide
Country/Region
Customer Care Center
Web Site
SOUTH AFRICA
0860-SAMSUNG (726-7864)
www.samsung.com
SPAIN
902-1-SAMSUNG(902 172 678)
www.samsung.com
SWEDEN
0771 726 7864 (SAMSUNG)
www.samsung.com
SWITZERLAND
0848-SAMSUNG (7267864, CHF
0.08/min)
www.samsung.com/ch
www.samsung.com/
ch_fr(French)
TADJIKISTAN
8-10-800-500-55-500
www.samsung.com
TAIWAN
0800-329-999
www.samsung.com
Country/Region
UKRAINE
Customer Care Center
0-800-502-000
Web Site
www.samsung.com/ua
www.samsung.com/
ua_ru
UZBEKISTAN
8-10-800-500-55-500
www.samsung.com
VENEZUELA
0-800-100-5303
www.samsung.com
VIETNAM
1 800 588 889
www.samsung.com
0266-026-066
TANZANIA
0685 88 99 00
www.samsung.com
THAILAND
1800-29-3232
www.samsung.com
02-689-3232
TRINIDAD &
TOBAGO
1-800-SAMSUNG (726-7864)
www.samsung.com
TURKEY
444 77 11
www.samsung.com
U.A.E
800-SAMSUNG (726-7864)
www.samsung.com
UGANDA
0800-300 300
www.samsung.com
U.K
0330 SAMSUNG (7267864)
www.samsung.com
U.S.A
1-800-SAMSUNG (726-7864)
www.samsung.com
Contact SAMSUNG worldwide
312
Glossary
ADF
The following glossary helps you get familiar with the product by
understanding the terminologies commonly used with printing as well as
mentioned in this user’s guide.
802.11
802.11 is a set of standards for wireless local area network (WLAN)
communication, developed by the IEEE LAN/MAN Standards Committee (IEEE
802).
802.11b/g/n
802.11b/g/n can share same hardware and use the 2.4 GHz band. 802.11b
supports bandwidth up to 11 Mbps, 802.11n supports bandwidth up to 150
Mbps. 802.11b/g/n devices may occasionally suffer interference from
microwave ovens, cordless telephones, and Bluetooth devices.
An Automatic Document Feeder (ADF) is a scanning unit that will automatically
feed an original sheet of paper so that the machine can scan some amount of the
paper at once.
AppleTalk
AppleTalk is a proprietary suite of protocols developed by Apple, Inc for
computer networking. It was included in the original Macintosh (1984) and is
now deprecated by Apple in favor of TCP/IP networking.
BIT Depth
A computer graphics term describing the number of bits used to represent the
color of a single pixel in a bitmapped image. Higher color depth gives a broader
range of distinct colors. As the number of bits increases, the number of possible
colors becomes impractically large for a color map. 1-bit color is commonly
called as monochrome or black and white.
Access point
Access Point or Wireless Access Point (AP or WAP) is a device that connects
wireless communication devices together on wireless local area networks
(WLAN), and acts as a central transmitter and receiver of WLAN radio signals.
BMP
A bitmapped graphics format used internally by the Microsoft Windows
graphics subsystem (GDI), and used commonly as a simple graphics file format
on that platform.
Glossary
313
Glossary
BOOTP
Coverage
Bootstrap Protocol. A network protocol used by a network client to obtain its IP
address automatically. This is usually done in the bootstrap process of
computers or operating systems running on them. The BOOTP servers assign
the IP address from a pool of addresses to each client. BOOTP enables 'diskless
workstation' computers to obtain an IP address prior to loading any advanced
operating system.
It is the printing term used for a toner usage measurement on printing. For
example, 5% coverage means that an A4 sided paper has about 5% image or text
on it. So, if the paper or original has complicated images or lots of text on it, the
coverage will be higher and at the same time, a toner usage will be as much as
the coverage.
CSV
CCD
Charge Coupled Device (CCD) is a hardware which enables the scan job. CCD
Locking mechanism is also used to hold the CCD module to prevent any damage
when you move the machine.
Comma Separated Values (CSV). A type of file format, CSV is used to exchange
data between disparate applications. The file format, as it is used in Microsoft
Excel, has become a de facto standard throughout the industry, even among
non-Microsoft platforms.
Collation
DADF
Collation is a process of printing a multiple-copy job in sets. When collation is
selected, the device prints an entire set before printing additional copies.
A Duplex Automatic Document Feeder (DADF) is a scanning unit that will
automatically feed and turn over an original sheet of paper so that the machine
can scan on both sides of the paper.
Control Panel
Default
A control panel is a flat, typically vertical, area where control or monitoring
instruments are displayed. They are typically found in front of the machine.
The value or setting that is in effect when taking a printer out of its box state,
reset, or initialized.
Glossary
314
Glossary
DHCP
Dot Matrix Printer
A Dynamic Host Configuration Protocol (DHCP) is a client-server networking
protocol. A DHCP server provides configuration parameters specific to the DHCP
client host requesting, generally, information required by the client host to
participate on an IP network. DHCP also provides a mechanism for allocation of
IP addresses to client hosts.
A dot matrix printer refers to a type of computer printer with a print head that
runs back and forth on the page and prints by impact, striking an ink-soaked
cloth ribbon against the paper, much like a typewriter.
DIMM
Dots Per Inch (DPI) is a measurement of resolution that is used for scanning and
printing. Generally, higher DPI results in a higher resolution, more visible detail
in the image, and a larger file size.
Dual Inline Memory Module (DIMM), a small circuit board that holds memory.
DIMM stores all the data within the machine like printing data, received fax data.
DPI
DRPD
DLNA
The Digital Living Network Alliance (DLNA) is a standard that allows devices on
a home network to share information with each other across the network.
Distinctive Ring Pattern Detection. Distinctive Ring is a telephone company
service which enables a user to use a single telephone line to answer several
different telephone numbers.
DNS
Duplex
The Domain Name Server (DNS) is a system that stores information associated
with domain names in a distributed database on networks, such as the Internet.
A mechanism that will automatically turn over a sheet of paper so that the
machine can print (or scan) on both sides of the paper. A printer equipped with
a Duplex Unit can print on both sides of paper during one print cycle.
Glossary
315
Glossary
Duty Cycle
Ethernet
Duty cycle is the page quantity which does not affect printer performance for a
month. Generally the printer has the lifespan limitation such as pages per year.
The lifespan means the average capacity of print-outs, usually within the
warranty period. For example, if the duty cycle is 48,000 pages per month
assuming 20 working days, a printer limits 2,400 pages a day.
Ethernet is a frame-based computer networking technology for local area
networks (LANs). It defines wiring and signaling for the physical layer, and frame
formats and protocols for the media access control (MAC)/data link layer of the
OSI model. Ethernet is mostly standardized as IEEE 802.3. It has become the most
widespread LAN technology in use during the 1990s to the present.
ECM
EtherTalk
Error Correction Mode (ECM) is an optional transmission mode built into Class 1
fax machines or fax modems. It automatically detects and corrects errors in the
fax transmission process that are sometimes caused by telephone line noise.
A suite of protocols developed by Apple Computer for computer networking. It
was included in the original Macintosh (1984) and is now deprecated by Apple
in favor of TCP/IP networking.
Emulation
FDI
Emulation is a technique of one machine obtaining the same results as another.
Foreign Device Interface (FDI) is a card installed inside the machine to allow a
third party device such as a coin operated device or a card reader. Those devices
allow the pay-for-print service on your machine.
An emulator duplicates the functions of one system with a different system, so
that the second system behaves like the first system. Emulation focuses on exact
reproduction of external behavior, which is in contrast to simulation, which
concerns an abstract model of the system being simulated, often considering its
internal state.
FTP
A File Transfer Protocol (FTP) is a commonly used protocol for exchanging files
over any network that supports the TCP/IP protocol (such as the Internet or an
intranet).
Glossary
316
Glossary
Fuser Unit
Mass storage device (HDD)
The part of a laser printer that fuses the toner onto the print media. It consists of
a heat roller and a pressure roller. After toner is transferred onto the paper, the
fuser unit applies heat and pressure to ensure that the toner stays on the paper
permanently, which is why paper is warm when it comes out of a laser printer.
Mass storage device (HDD), commonly referred to as a hard drive or hard disk, is
a non-volatile storage device which stores digitally-encoded data on rapidly
rotating platters with magnetic surfaces.
IEEE
Gateway
A connection between computer networks, or between a computer network
and a telephone line. It is very popular, as it is a computer or a network that
allows access to another computer or network.
The Institute of Electrical and Electronics Engineers (IEEE) is an international
non-profit, professional organization for the advancement of technology
related to electricity.
IEEE 1284
Grayscale
A shades of gray that represent light and dark portions of an image when color
images are converted to grayscale; colors are represented by various shades of
gray.
The 1284 parallel port standard was developed by the Institute of Electrical and
Electronics Engineers (IEEE). The term "1284-B" refers to a specific connector
type on the end of the parallel cable that attaches to the peripheral (for example,
a printer).
Halftone
Intranet
An image type that simulates grayscale by varying the number of dots. Highly
colored areas consist of a large number of dots, while lighter areas consist of a
smaller number of dots.
A private network that uses Internet Protocols, network connectivity, and
possibly the public telecommunication system to securely share part of an
organization's information or operations with its employees. Sometimes the
term refers only to the most visible service, the internal website.
Glossary
317
Glossary
IP address
IPX/SPX
An Internet Protocol (IP) address is a unique number that devices use in order to
identify and communicate with each other on a network utilizing the Internet
Protocol standard.
IPX/SPX stands for Internet Packet Exchange/Sequenced Packet Exchange. It is a
networking protocol used by the Novell NetWare operating systems. IPX and
SPX both provide connection services similar to TCP/IP, with the IPX protocol
having similarities to IP, and SPX having similarities to TCP. IPX/SPX was
primarily designed for local area networks (LANs), and is a very efficient protocol
for this purpose (typically its performance exceeds that of TCP/IP on a LAN).
IPM
The Images Per Minute (IPM) is a way of measuring the speed of a printer. An IPM
rate indicates the number of single-sided sheets a printer can complete within
one minute.
IPP
The Internet Printing Protocol (IPP) defines a standard protocol for printing as
well as managing print jobs, media size, resolution, and so forth. IPP can be used
locally or over the Internet to hundreds of printers, and also supports access
control, authentication, and encryption, making it a much more capable and
secure printing solution than older ones.
ISO
The International Organization for Standardization (ISO) is an international
standard-setting body composed of representatives from national standards
bodies. It produces world-wide industrial and commercial standards.
ITU-T
The International Telecommunication Union is an international organization
established to standardize and regulate international radio and
telecommunications. Its main tasks include standardization, allocation of the
radio spectrum, and organizing interconnection arrangements between
different countries to allow international phone calls. A -T out of ITU-T indicates
telecommunication.
Glossary
318
Glossary
ITU-T No. 1 chart
LED
Standardized test chart published by ITU-T for document facsimile
transmissions.
A Light-Emitting Diode (LED) is a semiconductor device that indicates the status
of a machine.
JBIG
MAC address
Joint Bi-level Image Experts Group (JBIG) is an image compression standard with
no loss of accuracy or quality, which was designed for compression of binary
images, particularly for faxes, but can also be used on other images.
Media Access Control (MAC) address is a unique identifier associated with a
network adapter. MAC address is a unique 48-bit identifier usually written as 12
hexadecimal characters grouped in pairs (e. g., 00-00-0c-34-11-4e). This address
is usually hard-coded into a Network Interface Card (NIC) by its manufacturer,
and used as an aid for routers trying to locate machines on large networks.
JPEG
Joint Photographic Experts Group (JPEG) is a most commonly used standard
method of lossy compression for photographic images. It is the format used for
storing and transmitting photographs on the World Wide Web.
LDAP
MFP
Multi Function Peripheral (MFP) is an office machine that includes the following
functionality in one physical body, so as to have a printer, a copier, a fax, a
scanner and etc.
The Lightweight Directory Access Protocol (LDAP) is a networking protocol for
querying and modifying directory services running over TCP/IP.
Glossary
319
Glossary
MH
NetWare
Modified Huffman (MH) is a compression method for decreasing the amount of
data that needs to be transmitted between the fax machines to transfer the
image recommended by ITU-T T.4. MH is a codebook-based run-length
encoding scheme optimized to efficiently compress white space. As most faxes
consist mostly of white space, this minimizes the transmission time of most
faxes.
A network operating system developed by Novell, Inc. It initially used
cooperative multitasking to run various services on a PC, and the network
protocols were based on the archetypal Xerox XNS stack. Today NetWare
supports TCP/IP as well as IPX/SPX.
MMR
Organic Photo Conductor (OPC) is a mechanism that makes a virtual image for
print using a laser beam emitted from a laser printer, and it is usually green or
rust colored and has a cylinder shape.
Modified Modified READ (MMR) is a compression method recommended by ITUT T.6.
Modem
OPC
An imaging unit containing a drum slowly wears the drum surface by its usage
in the printer, and it should be replaced appropriately since it gets worn from
contact with the cartridge development brush, cleaning mechanism, and paper.
A device that modulates a carrier signal to encode digital information, and also
demodulates such a carrier signal to decode transmitted information.
Originals
MR
The first example of something, such as a document, photograph or text, etc,
which is copied, reproduced or translated to produce others, but which is not
itself copied or derived from something else.
Modified Read (MR) is a compression method recommended by ITU-T T.4. MR
encodes the first scanned line using MH. The next line is compared to the first,
the differences determined, and then the differences are encoded and
transmitted.
Glossary
320
Glossary
OSI
PostScript
Open Systems Interconnection (OSI) is a model developed by the International
Organization for Standardization (ISO) for communications. OSI offers a
standard, modular approach to network design that divides the required set of
complex functions into manageable, self-contained, functional layers. The layers
are, from top to bottom, Application, Presentation, Session, Transport, Network,
Data Link and Physical.
PostScript (PS) is a page description language and programming language used
primarily in the electronic and desktop publishing areas. - that is run in an
interpreter to generate an image.
Printer Driver
PABX
A program used to send commands and transfer data from the computer to the
printer.
A private automatic branch exchange (PABX) is an automatic telephone
switching system within a private enterprise.
Print Media
PCL
The media like paper, envelopes, labels, and transparencies which can be used
in a printer, a scanner, a fax or, a copier.
Printer Command Language (PCL) is a Page Description Language (PDL)
developed by HP as a printer protocol and has become an industry standard.
Originally developed for early inkjet printers, PCL has been released in varying
levels for thermal, dot matrix printer, and laser printers.
PPM
Pages Per Minute (PPM) is a method of measurement for determining how fast
a printer works, meaning the number of pages a printer can produce in one
minute.
PDF
Portable Document Format (PDF) is a proprietary file format developed by
Adobe Systems for representing two dimensional documents in a device
independent and resolution independent format.
Glossary
321
Glossary
PRN file
RADIUS
An interface for a device driver, this allows software to interact with the device
driver using standard input/output system calls, which simplifies many tasks.
Protocol
Remote Authentication Dial In User Service (RADIUS) is a protocol for remote
user authentication and accounting. RADIUS enables centralized management
of authentication data such as usernames and passwords using an AAA
(authentication, authorization, and accounting) concept to manage network
access.
A convention or standard that controls or enables the connection,
communication, and data transfer between two computing endpoints.
Resolution
PS
The sharpness of an image, measured in Dots Per Inch (DPI). The higher the dpi,
the greater the resolution.
See PostScript.
SMB
PSTN
The Public-Switched Telephone Network (PSTN) is the network of the world's
public circuit-switched telephone networks which, on industrial premises, is
usually routed through the switchboard.
Server Message Block (SMB) is a network protocol mainly applied to share files,
printers, serial ports, and miscellaneous communications between nodes on a
network. It also provides an authenticated Inter-process communication
mechanism.
Glossary
322
Glossary
SMTP
TCR
Simple Mail Transfer Protocol (SMTP) is the standard for e-mail transmissions
across the Internet. SMTP is a relatively simple, text-based protocol, where one
or more recipients of a message are specified, and then the message text is
transferred. It is a client-server protocol, where the client transmits an email
message to the server.
Transmission Confirmation Report (TCR) provides details of each transmission
such as job status, transmission result and number of pages sent. This report can
be set to print after each job or only after failed transmissions.
SSID
Service Set Identifier (SSID) is a name of a wireless local area network (WLAN). All
wireless devices in a WLAN use the same SSID in order to communicate with
each other. The SSIDs are case-sensitive and have a maximum length of 32
characters.
Tagged Image File Format (TIFF) is a variable-resolution bitmapped image
format. TIFF describes image data that typically come from scanners. TIFF
images make use of tags, keywords defining the characteristics of the image that
is included in the file. This flexible and platform-independent format can be
used for pictures that have been made by various image processing
applications.
Subnet Mask
Toner Cartridge
The subnet mask is used in conjunction with the network address to determine
which part of the address is the network address and which part is the host
address.
A kind of bottle or container used in a machine like a printer which contains
toner. Toner is a powder used in laser printers and photocopiers, which forms
the text and images on the printed paper. Toner can be fused by by a
combination of heat/pressure from the fuser, causing it to bind to the fibers in
the paper.
TCP/IP
TIFF
The Transmission Control Protocol (TCP) and the Internet Protocol (IP); the set of
communications protocols that implement the protocol stack on which the
Internet and most commercial networks run.
Glossary
323
Glossary
TWAIN
Watermark
An industry standard for scanners and software. By using a TWAIN-compliant
scanner with a TWAIN-compliant program, a scan can be initiated from within
the program. It is an image capture API for Microsoft Windows and Apple
Macintosh operating systems.
A watermark is a recognizable image or pattern in paper that appears lighter
when viewed by transmitted light. Watermarks were first introduced in Bologna,
Italy in 1282; they have been used by papermakers to identify their product, and
also on postage stamps, currency, and other government documents to
discourage counterfeiting.
UNC Path
WEP
Uniform Naming Convention (UNC) is a standard way to access network shares
in Window NT and other Microsoft products. The format of a UNC path is:
\\\\
URL
Uniform Resource Locator (URL) is the global address of documents and
resources on the Internet. The first part of the address indicates what protocol to
use, the second part specifies the IP address or the domain name where the
resource is located.
Wired Equivalent Privacy (WEP) is a security protocol specified in IEEE 802.11 to
provide the same level of security as that of a wired LAN. WEP provides security
by encrypting data over radio so that it is protected as it is transmitted from one
end point to another.
WIA
Windows Imaging Architecture (WIA) is an imaging architecture that is originally
introduced in Windows Me and Windows XP. A scan can be initiated from within
these operating systems by using a WIA-compliant scanner.
USB
WPA
Universal Serial Bus (USB) is a standard that was developed by the USB
Implementers Forum, Inc., to connect computers and peripherals. Unlike the
parallel port, USB is designed to concurrently connect a single computer USB
port to multiple peripherals.
Wi-Fi Protected Access (WPA) is a class of systems to secure wireless (Wi-Fi)
computer networks, which was created to improve upon the security features of
WEP.
Glossary
324
Glossary
WPA-PSK
WPA-PSK (WPA Pre-Shared Key) is special mode of WPA for small business or
home users. A shared key, or password, is configured in the wireless access point
(WAP) and any wireless laptop or desktop devices. WPA-PSK generates a unique
key for each session between a wireless client and the associated WAP for more
advanced security.
WPS
The Wi-Fi Protected Setup (WPS) is a standard for establishing a wireless home
network. If your wireless access point supports WPS, you can configure the
wireless network connection easily without a computer.
XPS
XML Paper Specification (XPS) is a specification for a Page Description Language
(PDL) and a new document format, which has benefits for portable document
and electronic document, developed by Microsoft. It is an XML-based
specification, based on a new print path and a vector-based deviceindependent document format.
Glossary
325
Index
UnixG
address book
cleaning
editingG
223
insideG
81
general setupG
214
outsideG
80
group editingG
224
pickup rollerG
83
group registeringG
224
scan unitG
84
registeringG
223
cleaning a machineG
80
usingG
223
control panelG
24
address book setupG
223
conventionG
14
administrator’s setupG
216
copy
AnyWeb PrintG
268
authorized users
registeringG
general setupG
191
copying
226
basic copyingG
58
reducing or enlarging copiesG
60
custom setupG
217
buttons
24SG26
id copyG
25SG26
default settings
56
email
general setupG
213
email addressG
220
searchingG
221
storingG
220
emulation
general setupG
213
emulation setupG
213
entering characterG
222
error messageG
100
27
print screenG
24
direct printing utilityG
235
scan toG
24
document boxG
214
tray settingG
general setupG
driver installation
55
fax
numeric keypadG
24SG26
eco printingG
favorites settings, for printingG
ecoG
wpsG
150
47
214
adding documents to a reserved faxG
255
automatic redialingG
253
canceling a reserved fax jobG
256
changing the receive modesG
259
delaying a fax transmissionG
255
forwarding a received fax to another
Index 326
Index
destinationG
257
forwarding a sent fax to another destinationG
256
general setupG
Printing sent fax report automaticallyG 263
receiving a fax in the computerG
258
receiving faxes in memoryG
262
receiving in Answering Machine modeG 260
64
receiving in Fax modeG
66
featuresG
198
printing faxes on both sides of the paperG
262
preparing to faxG
188
print media featureG
109
general iconsG
237
313
scanningG
250
unifled driver configuratorG
280
using SetIPG
143
261
receiving in Tel modeG
260
receiving with ext. telephoneG
260
id copyG
redialing the last numberG
253
sending a fax in the computerG
254
sending a priority faxG
256
253
fax sending
67
60
linux scanningG
250
loading
jam
sending faxes on both sides of paperG 258
adjusting resolutionG
14
printingG
receiving in secure modeG
67
driver reinstallation for USB cable connectedG
138
239
glossaryG
adjusting darknessG
driver installation for USB cable connectedG
136
21
printer propertiesG
260
faxing
driver installation for network connectedG
149
204
receiving in Fax modeG
65
306
general settingsG
260
multi sendingG
common Linux problemsG
receiving in DRPD modeG
fax featureG
Linux
machine featuresG
front viewG
203SG208
clearing original documentG
89
clearing paperG
94
tips for avoiding paper jamsG
88
paper in the tray1G
41
special mediaG
43
loading originalsG
49
machine informationG191SG197SG198SG203SG208
LCD display
browsing the machine statusG191SG197SG198SG
machine setup
machine statusG
191SG197SG198SG203SG208
Macintosh
Index 327
Index
common Macintosh problemsG
305
driver installation for network connectedG
147
driver installation for USB cable connectedG
134
driver reinstallation for USB cable connectedG
135
printingG
236
scanningG
249
system requirementsG
113
using SetIPG
142
macintosh scanningG
maintenance partsG
249
memory/hard drive featureG
menu overviewG
147
150
144
general setupG
214SG215
installing environmentG
115
introducing network programsG
140
IPv6 configurationG
153
SetIP programG
141SG142SG143SG181
wired network setupG
141
wireless network setupG
156
n-up printing
MacintoshG
71
43
optional memory
264SG265
33
multi-purpose tray
setting up the optional memoryG
output supportG
265
48
overlay printing
43
createG
233
using special mediaG
43
deleteG
233
printG
233
network
driver installation
LinuxG
placing a machine
149
219
postScript driver
troubleshootingG
308
preparing originals typeG
48
print
general setupG
190
print media
card stockG
46
envelopeG
44
labelsG
45
109
preprinted paperG
46
setting the paper sizeG
47
setting the paper typeG
47
special mediaG
43
print menuG
190
print resolution set
LinuxG
tips on usingG
adjusting the altitudeG
output supportG
236
manual feeding
loadingG
MacintoshG
UNIXG
WindowsG
238
printer preferences
LinuxG
239
printer status
general informationG
276SG278
printing
changing the default print settingsG
227
Index 328
Index
LinuxG
237
power problemsG
286
Scanning with Samsung Scan AssitantG 247
MacintoshG
236
printing problemsG
287
Scanning with SmarThru 4G
printing quality problemsG
291
scanning problemsG
300
multiple pages on one sheet of paper
MacintoshG
236
printing a document
WindowsG
52
printing on both sides of paper
MacintoshG
237
regulatiory informationG
printing to a fileG
228
reports
setting as a default machineG
227
special printer featuresG
229
UNIXG
239
using direct printing utilityG
235
rear viewG
printing a document
237
MacintoshG
236
safety
UNIXG
239
informationG
227
symbolsG
operating system problemsG
problems
Linux scanningG
250
Macintosh scanningG
249
116
Scanning from network connected machineG
243
67
Scanning to emailG
244
Scanning to FTP/SMB serverG
245
Scanning using the WIA driverG
247
Scanning with SmarThru OfficeG
248
SetIP programG
Samsung Printer StatusG
304
242
service contact numbersG
LinuxG
problem
basic informationG
Scanning from image editing programG 246
resolution
printing featureG
scanning
23
machine informationG 191SG198SG199SG200SG
203SG
204SG205SG208SG209
faxingG
309
141SG181
SmarThru 4G
248
15
SmarThru OfficeG
248
15
Special featuresG
218
specificationsG
106
print mediaG
109
276
scan
general setupG
248
202
statusG
copying problemsG
299
Scan AssitantG
247
StoringG
faxing problemsG
302
scan featureG
242
paper feeding problemsG
285
supplies
Scanning
available suppliesG
25SG27
220
70
Index 329
Index
using SetIPG
estimated toner cartridge lifeG
73
monitoring the supplies lifeG
78
orderingG
70
driver installation for network connectedG
150
replacing toner cartridgeG
76
printingG
UNIX
239
Unix
SyncThru Web Service
general informationG
270
SyncThru™ Web ServiceG
270
114
usbG
212
general setupusbG
212
USB cable
driver installationG
toner cartridge
estimated lifeG
73
handling instructionsG
72
non-Samsung and refilledG
72
redistributing tonerG
74
replacing the cartridgeG
76
storingG
72
tray
30SG31SG134SG136
driver reinstallationG
using helpG
135SG138
55SG237
createG
232
deleteG
232
232
editG
changing the tray sizeG
40
Windows
manual feedingG
43
common Windows problemsG
setting the paper size and typeG
47
driver installation for network connectedG
144
98
156
Infrastructure modeG
156
WPS
disconnectiongG
PBC modeG
163SG167SG176
160
160
WPS (the machine does not have a display
screen)
PBCG
161
PING
161
wireless network
180
watermark
40
understanding the status LEDG
ad hoc modeG
network cableG
adjusting the width and lengthG
wireless
USB cableG
system requirementsG
141SG181
304
driver installation for USB cable connectedG
30SG
31
system requirementsG
112
Index 330

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Print high-res
Author                          : sk1004.lee
Create Date                     : 2011:10:06 16:51:52-04:00
Modify Date                     : 2011:10:06 16:54:38-04:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : FrameMaker 8.0
Metadata Date                   : 2011:10:06 16:54:38-04:00
Format                          : application/pdf
Title                           : Egmont_F_english.book
Creator                         : sk1004.lee
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:6a5552cd-617f-4392-a490-79c16e2fcfe1
Instance ID                     : uuid:1f55ba89-0216-4bc9-b075-53dae959a541
Page Count                      : 180

EXIF Metadata provided by EXIF.tools