Download: Mirror Download [FCC.gov] Document ID 529964 Application ID kv+md55D08plYuSOAZs0eg== Document Description Users Manual Short Term Confidential No Permanent Confidential No Supercede No Document Type User Manual Display Format Adobe Acrobat PDF - pdf Filesize 54.33kB (679177 bits) Date Submitted 2005-04-08 00:00:00 Date Available 2005-05-23 00:00:00 Creation Date 2005-04-06 15:33:13 Producing Software Acrobat PDFWriter 5.0 Windows NT¿ë Document Lastmod 2005-04-06 15:40:45 Document Title C:\Documents and Settings\Admin Document Creator 훈민 워드 i - [C:\Documents and Settings\Administrator\바탕 화면\1.gul] Document Author: Administrator
* Some of the contents of this manual may differ from your phone,
depending on the software installed or your service provider.
* Depending on your country, your phone and accessories may
appear different from the illustrations in this manual.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-xxxxxA
English. 03/2005. Rev 1.0
SGH-C230
User’s Guide
Use road safety at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Keep your phone away from small children
All wireless phones may be subject to interference,
which could affect their performance.
Keep the phone and all its parts, including accessories,
out of the reach of small children.
Be aware of special regulations
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories could
damage your phone and may be dangerous.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Emergency call
Key in the emergency number for your present
location, then press [ ].
Important safety precautions
Interference
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see "Health and
safety information" on page 62.
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to
“Getting started and Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful
attention to the subsequent information
regarding safety or phone features.
→
Indicates that you can get more
information on the referenced page.
Indicates that you need to press the
Navigation keys to scroll to the specified
option and then select it.
[key name] Indicates a key on the phone. For
example, [ ]
Indicates a soft key, whose function is
displayed on the phone screen. For
example,
•
Tri-band operation
Use your phone in worldwide GSM networks, in
any of 900, 1800, and 1900 bands.
Special features of your phone
•
Simple, compact design with Intenna
Samsung’s powerful intenna technology allows
the best call quality without an annoying
external antenna.
•
WAP browser
Access the wireless web and
access various services and upto-the-minute information.
•
•
Multimedia Message Service (MMS)
Send and receive MMS messages with a
combination of text, images, and sounds.
•
FM radio
Listen to your favourite radio channels using
the headset.
•
•
Voice recorder
Record memos or sounds.
•
Java
Enjoy Java™-based embedded
games and download new
games.
•
IrDA
Send and receive Phonebook
and Organiser data via an
infrared port.
Special features of your phone
Phonebook
Store up to 2000 contact
numbers.
Calendar and To do list
Keep track of your daily, weekly,
and monthly schedules and
tasks.
Contents
Unpack
Make sure you have each item
Your phone
Enter text
18
ABC, T9, Number, and Symbol mode
Menu functions
Install and charge the phone ................................... 7
Power on or off ...................................................... 8
Keys and display .................................................... 9
Access menu functions.......................................... 11
Customise your phone .......................................... 12
Make/Answer calls................................................ 13
All menu options listed
Step outside the phone
14
Browse WAP ........................................................ 14
21
Advanced calling features
First steps to operate your phone
Begin with your WAP, messages, FM radio, and other special
features
14
15
16
17
Call functions
Buttons, features, and locations
Get started
Use Phonebook ....................................................
Send messages....................................................
View messages ....................................................
Listen to the FM radio ...........................................
25
Solve problems
60
Health and safety information
62
Index
68
Overview of menu functions
To access Menu mode, press in Idle mode.
1 SIM AT
p. 28
2 Call records
p. 29
p.
p.
p.
p.
p.
p.
Missed calls
Received calls
Dialled calls
Delete all
Call time
Call costs*
29
29
29
29
29
30
3 Network services
p. 30
p.
p.
p.
p.
p.
p.
p.
Call diverting
Call barring
Call waiting
Network selection
Caller ID
Closed user group
Band selection
30
31
32
32
32
33
33
6 Funbox
p. 45
34
34
34
34
34
35
35
35
p.
p.
p.
p.
p.
p.
7 Organiser
p. 49
5 Messages
p. 35
1 Text messages
2 Multimedia messages
3 Push messages
p. 35
p. 40
p. 44
p.
p.
p.
p.
p.
p.
p.
4 Sound settings
p. 34
p.
p.
p.
p.
p.
p.
p.
p.
Ring tone
Ring volume
Alert type
Keypad tone
Message tone
Alert on call
Power on/off
Extra tones
WAP browser
Games
Sounds
Images
Delete all
Memory status
Alarm
Calendar
Time & Date
Calculator
To do list
Voice memo
Currency exchange
45
47
48
48
49
49
8 FM radio
p. 54
9 Phone settings
p. 56
p.
p.
p.
p.
p.
p.
p.
p.
p.
Infrared activate
Display settings
Greeting message
Own number
Language
Security
Extra settings
Short cut
Reset settings
56
56
57
57
57
57
59
59
59
49
50
51
51
52
53 *Shows only if supported by your
54 SIM card.
Unpack
Your phone
Make sure you have each item
Buttons, features, and locations
Earpiece
Headset jack
Phone
Travel adapter
Display
Volume keys
Battery
User’s manual
You can obtain various accessories from your local
Samsung dealer.
The items supplied with your phone and the accessories
at your Samsung dealer may vary, depending on your
country or service provider.
Navigation keys
(Up/Down/Left/Right)
Left soft key
WAP access/
Confirm key
Right soft key
Dial key
Cancel/
Correct key
Power on/off/
Menu exit key
Infrared port
Alphanumeric keys
Special
function keys
Microphone
Get started
Install the battery.
Plug the adapter into a standard AC wall outlet.
When the phone is completely charged (the
battery icon stops blinking), unplug the adapter
from the power outlet.
Plug the travel adapter
into the phone.
First steps to operate your phone
SIM card information
When you subscribe to a cellular network, you receive
a plug-in SIM (Subscriber Identity Module) card
loaded with your subscription details, such as your
PIN, and available optional services.
Install and charge the phone
Remove the battery.
If the phone is already
on, first turn it off by
holding [
].
Insert the SIM card.
Make sure that the goldcoloured contacts on the
card face down into the
phone.
Get started
Remove the adapter from the phone.
Power on or off
Power on
1. Open the phone.
2. Press and hold [
the phone.
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the battery low message displays, and
• the empty battery icon [
] blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
] to turn on
Do not turn on
the phone when
mobile phone
use is prohibited.
3. If necessary, enter the PIN and
press .
Power off
1. Open the phone.
2. Press and hold [
].
Keys and display
Key(s)
Description
Key(s)
Description
Ends a call.
Hold down to switch the phone on and off.
In Menu mode, cancels input and returns the
phone to Idle mode.
In Idle mode, access your favourite menu
options directly.p. 59
In Menu mode, scroll through the menu
options.
Enter numbers, letters, and some special
characters.
In Idle mode, hold [1] down to access your
voicemail.
In Idle mode, launches the Wireless
Application Protocol (WAP) browser.
In Menu mode, selects the highlighted menu
option.
Enter special characters.
In Idle mode, hold [ ] down to activate or
deactivate Silent mode.
Sends or answers a call.
In Idle mode, retrieves the last number
dialled, missed, or received.
Deletes characters from the display.
In Menu mode, returns to the previous
menu level.
Get started
Perform the function indicated on the
bottom line of the display.
Adjusts the volume of various sounds for the
phone.
In Idle mode, adjusts the keypad tone
volume.
(on the left)
In Menu mode, scrolls through menu
options.
Get started
Display
Layout
Icons
The display has the three areas.
Icons
displays various icons.
Menu
Icons
Phonebook
Call diverting feature is active
p. 32
GPRS network
Roaming
New text message
Text and graphics
displays messages,
instructions, and
information you enter.
New voicemail message
Soft key function
indicators
shows the current
functions assigned to the
two soft keys.
Mute mode is activep. 23
Received signal strength
Key Lock mode is active
p. 56
Call in progress
Out of your service area; you
cannot send or receive calls
10
(continued)
New multimedia message
IrDA port is active
Silent mode is active or the call
ringer is set to vibrate
p. 12, p. 34
Alarm set
Battery power level
Access menu functions
Use the soft
keys
Menu
Press the left soft
key to access
Menu mode.
Select an
option
1. Press the appropriate soft key.
2. Press the Navigation keys to
move to the next or previous
option.
Phonebook
3. Press or [ ] to
confirm the function displayed
or option highlighted.
Press the right soft
key to access the
Phonebook menu.
4. To exit, choose either of the
following methods:
• Press < > or [C] to move
up one level.
• Press [ ] to return to Idle
mode.
Use shortcuts
Get started
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current role.
Press the number key
corresponding to the option you
want.
11
Get started
Customise your phone
Display
language
1. In Idle mode, press
and select Phone settings →
Language.
Switch to
Silent mode
You can switch the phone to Silent
mode to avoid disturbing other
people with your phone sounds.
Press and hold [ ] in Idle mode.
Phone lock
You can protect the phone against
unauthorised use with a phone
password.
2. Select a language.
Call ringer
melody
1. In Idle mode, press
and select Sound settings →
Ring tone.
2. Select a ringer melody.
Idle mode
wallpaper
You can set a wallpaper for the idle
screen.
1. In Idle mode, press
and select Phone settings →
Display settings →
Wallpaper → Wallpaper list.
2. Scroll to the image you want.
3. Press .
12
1. In Idle mode, press
and select Phone settings →
Security → Change
password.
2. Enter the default password,
“00000000” and press .
3. Enter a new 4- to 8- digit
password and press .
4. Enter the new password again
and press .
Phone lock
(continued)
5. Select Phone lock.
6. Select Enable.
Key lock
You can lock the keypad to prevent
accidental key presses from
affecting phone operations.
In Idle mode, press and hold [ ]
and select Yes. To unlock it, press
and then press [ ].
You can also set the phone to
automatically lock the keypad.
p. 56
Make a call
1. Enter an area code and phone
number.
2. Press [
].
3. To end the call, press [
Answer a call
].
1. When the phone is ringing,
press [ ].
2. To end the call, press [
Adjust the
volume during
a call
Get started
7. Enter the password and press
.
Make/Answer calls
].
Press [ / ].
13
Step outside the phone
Begin with your WAP, messages, FM radio, and other
special features
Browse WAP
Using a built-in WAP (Wireless Access Protocol)
browser, you can get easy access to the wireless web
to receive a variety of updated services and
information and to enjoy download of web contents.
Launch the
browser
Navigate the
browser
In Idle mode, press [ ].
•
•
•
•
•
14
To scroll through browser items,
press [Up] or [Down].
To select an item, press [ ].
To return to the previous page,
press [C].
To return to the homepage,
press and select
Home.
To access browser options,
press and select
Menu.
Use Phonebook
Add an entry
To the phone’s memory
1. In Idle mode, enter a phone
number and press .
2. Select a number type.
3. Select Phone.
4. Enter a name and press .
5. Press to save the entry.
To the SIM card
1. In Idle mode, enter a phone
number and press .
2. Select a number type.
3. Select SIM.
4. Enter a name and press .
5. Press to save the entry.
Find an entry
1. In Idle mode, press
and select
Search.
3. Select a number.
4. Press [ ] to dial, or
to access options.
Send messages
1. In Idle mode, press
Send a text
and select Messages → Text
message (SMS)
messages → Write new.
2. Enter the message text.
3. Press and select
Save and send or Send only.
4. If you selected Save and send,
select a memory location.
1. In Idle mode, press
and select Messages →
Multimedia messages →
Write new.
Step outside the phone
2. Select an entry.
Send a
multimedia
message
(MMS)
2. Enter the message subject
press .
3. Select Add here and add
message contents.
4. When you finish, press
and select Send.
5. Select a destination type.
6. Select one of Phone number,
E-mail address, or
Phonebook.
7. Enter a destination number or
an e-mail address, or select
from Phonebook and press
.
5. Enter a destination number and
press .
15
Step outside the phone
Send a
multimedia
message
(MMS)
(continued)
8. To add other destinations,
select Add destination and
repeat from step 6.
9. To add destinations of other
types, press < > and repeat
from step 5.
10. When you finish, select Send
message.
View messages
View a text
message
When a notification appears:
Press . The message
displays.
From the Inbox:
1. In Idle mode, press
and select Messages → Text
messages → Inbox.
2. Select a message.
16
View a
multimedia
message
When a notification appears:
1. Press .
2. Press and select
Retrieve. The message
displays.
From the Inbox:
1. In Idle mode, press
and select Messages →
Multimedia messages →
Inbox.
2. Select a message.
Listen to the FM radio
2. In Idle mode, press
and select FM radio.
3. Press [Left] or [Right] to
manually find the frequency of
a radio channel you want.
4. Press and select
Add.
Listening to
the radio
1. Plug the connector of the
headset into the jack on the left
side of the phone.
2. In Idle mode, press
and select FM radio.
Step outside the phone
Finding and
setting radio
channels
1. Plug the connector of the
headset into the jack on the left
side of the phone.
3. Press [Up] or [Down] to scroll
to the channel you want.
4. Press and select
Power on/off → On.
5. To turn off the radio, disconnect
the headset.
5. Enter a name for the channel
and press twice.
6. Select an empty location.
17
Using T9 mode
Enter text
ABC, T9, Number, and Symbol mode
You can enter text for some features such as
messaging, Phonebook, or Organiser, using T9 mode,
ABC mode, Number mode, and Symbol mode.
Changing the text input mode
The text input mode indicator displays when the
cursor is in a text field.
Press the right soft key to change the input mode.
Example: Writing a text message
Write new
T9 mode
ABC mode
Number mode
None Symbol mode
Text input mode
indicator
18
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
Entering a word in T9 mode
1. Press [2] to [9] to start entering a word. Press
each key once for each letter.
For example, press [4], [3], [5], [5], and [6] to
enter Hello in T9 mode.
T9 predicts the word that you are typing, and it
may change with each key that you press.
2. Enter the whole word before editing or deleting
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [0] to display alternative word
choices for the keys that you have pressed.
For example, Of and Me use [6] and [3].
4. Press [ ] to insert a space and enter the next
word.
Adding a new word to the T9 dictionary
This feature may not be available for some languages.
1. Enter the word that you want to add.
2. Press [0] to display alternative words for your key
presses. When there are no more alternative
words, Add displays on the bottom line.
3. Press .
4. Enter the word you want using ABC mode and
press .
Using ABC mode
Press the appropriate key until the character you want
appears on the screen.
Enter text
Tips for using T9 mode
• Press [1] to enter periods or apostrophes
automatically.
• Press [ ] to change case. Initial capital ( ),
Capital lock ( ), and Lower case ( ) are
available.
• Press [Left] or [Right] to move the cursor.
• Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Characters in order displayed
Key
Upper case
Lower case
space
19
Enter text
Tips for using ABC mode
• To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
• Press [ ] to insert a space.
• Press [ ] to change case. Initial capital ( ),
Capital lock ( ), and Lower case ( ) are
available.
• Press the Navigation keys to move the cursor.
• Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
• Depending on your country, you may be able to
access an input mode for your specific language by
holding [ ].
20
Using Number mode
Number mode enables you to enter numbers.
Press the keys corresponding to the digits you want.
Using Symbol mode
Symbol mode enables you to insert symbols.
To
Press
display more symbols
[Up] or [Down].
select a symbol
the corresponding
number key.
clear the symbol(s)
[C].
insert the symbol(s)
.
Call functions
Advanced calling features
Making a call
1. In Idle mode, enter the area code and phone
number.
2. Press [ ].
Press [C] to clear the last digit or press and hold
[C] to clear the whole display. You can move the
cursor to edit an incorrect digit.
Making an international call
1. In Idle mode, press and hold [0]. The + character
appears.
2. Enter the country code, area code, and phone
number, then press [ ].
Redialling recent numbers
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press [
].
Making a call from Phonebook
Once you have stored a number in Phonebook, you
can dial the number by selecting it from
Phonebook.p. 25
You can also use the speed dial feature to assign your
most frequently called numbers to specific number
keys.p. 27
Dialling a number from the phone’s memory
1. In Idle mode, press and hold [0]. A + appears.
2. Enter the location number for the phone number
you want and press [ ].
3. Press [Up] or [Down] to scroll through other
numbers.
4. Press or [ ] to dial the number you want.
Dialling a number from the SIM card
1. In Idle mode, enter the location number for the
phone number you want and press [ ].
21
Call functions
2. Press [Up] or [Down] to scroll through other
numbers.
3. Press or [ ] to dial the number you want.
Ending a call
Press [
].
Answering a call
When you receive an incoming call, the phone rings
and displays the incoming call image.
Press or [
] to answer the call.
Tips for answering a call
• When Anykey answer in the Extra settings
menu is active, you can press any key to answer
a call, except for and [ ].p. 59
• Press or [ ] to reject a call.
22
Viewing missed calls
If you have missed calls, the screen displays how
many calls you have missed.
1. Press .
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
Using the headset
Use the headset to make or answer calls without
holding the phone.
Connect the headset to the jack on the left side of the
phone.
The buttons on the headset work as listed below:
To
Press
redial the last call
the button twice.
answer a call
and hold the button.
end a call
and hold the button.
Options during a call
Muting or sending key tones
You can access a number of functions during a call.
You can turn the key tones off or on.
Use [ / ] to adjust the earpiece volume during a call.
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
Press and select Mute keys or Send
keys.
To communicate with answering machines or
computerised telephone systems, Send keys must
be selected.
Placing a call on hold/Retrieving
Sending a sequence of DTMF tones
Press or to place the call on hold
or retrieve the call.
Dual tone multi-frequency (DTMF) tones are the tones
used in phones for tone dialling.
Using the menu functions
Press and select Menu.
Switching off the microphone (Mute mode)
You can temporarily switch off your phone’s
microphone so that the other person on the phone
cannot hear you.
Press and select Mute or Unmute.
Call functions
Adjusting the volume during a call
You can send DTMF tones as a group after entering the
entire number you need to send or retrieving a
number from Phonebook. This feature is helpful for
entering a password or an account number when you
call an automated system, like a banking service.
1. When connected with a teleservice system, press
and select Send DTMF.
2. Enter the number you need to send and press
.
23
Call functions
Using Phonebook
You can access the Phonebook menu to locate or
store entries.p. 25
Press and select Phonebook.
Answering a second call
You can answer an incoming call, if your network
supports it and you have activated the call waiting
feature.p. 32
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press to switch between the calls.
3. Press and select End held call to end
the call on hold.
4. To end the current call, press [ ].
Making a multi-party call
Use this feature to allow as many as six people to join
a multi-party call, or conference call.
Your service provider must support multi-party calls
for you to use this feature.
24
Setting up a multi-party call
1. Call the first participant.
2. Call the second participant. The first call is
automatically put on hold.
3. Press and select Join. The first
participant is added to the multi-party call.
4. If desired, call another person or answer an
incoming call.
5. Press and select Join.
6. Repeat steps 4 and 5 as desired.
Having a private conversation with one
participant
1. Press and select Select one.
2. Select a name or number from the participant list.
3. Select Private.
You can talk privately with that person, while the
other participants converse with each other.
4. To return to the multi-party call, press
and select Join.
Dropping one participant
1. Press and select Select one.
2. Select a name or number from the participant list.
3. Press [Down] and select Remove.
The participant is dropped from the call, but the
call continues with the other parties.
4. Press [ ] to end the multi-party call.
Menu functions
All menu options listed
Phonebook
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Phonebook.
To access this menu, press in Idle
mode.
Search
Use this menu to search for numbers in Phonebook.
Finding an entry
1. Enter the first few letters of the name that you
want to find.
2. Select the name you want from the list.
3. Press [ ] to dial the number, or to
access Phonebook options.
25
Menu functions
Using Phonebook options
While viewing an entry in Phonebook, press
to access the following options:
• Paste: paste the number into the normal dialling
mode.
• Edit: edit the entry information.
• Delete: delete the number from Phonebook.
• Copy: copy the number to the phone’s memory or
SIM card.
• Caller group: assign a caller group.
• Add entry: add a new entry.
4. Enter a number or an e-mail address and press
.
5. Change the location number, if you want, and
press .
New entry
Group search
Use this menu to add a new entry to Phonebook.
Use this menu to search your entries in Phonebook in
caller groups.
1. Enter the first few letters of the group name.
2. Select a group.
3. Select the name you want.
4. Press [ ] to dial the number or to
access Phonebook options.
Storing a number or an e-mail address in the
phone’s memory
1. Select a number type.
2. Select Phone.
3. Enter a name and press .
26
Storing a number on the SIM card
1. Select a number type.
2. Select SIM.
3. Enter a name and press .
4. Enter a number and press
5. Change the location number, if you want, and
press .
Edit group
Use this menu to edit your caller groups’ properties.
Use this menu to assign speed dial numbers (2 to 9) to
eight of your most frequently called numbers.
Assigning speed dial entries
1. Select a key location from 2 to 9. Key 1 is reserved
for your voice mail server.
2. Select the name you want from the Phonebook list.
3. Select the number you want.
Dialling speed dial entries
Press and hold the appropriate key in Idle mode.
Phonebook
Speed dial
Menu functions
From the group list, press to access the
following options:
• Call ring tone: set a ring tone for incoming calls
from the group.
• SMS tone: set a ring tone for incoming messages
from the group.
• Graphic: set a graphic icon for incoming calls from
the group.
• Group name: assign a name to the group.
Managing speed dial entries
While viewing the Speed dial screen, press
to access the following options:
• Change: assign a different number to an assigned
key.
• Delete: delete the setting for the key.
• Delete all: delete the settings for all the keys.
• Number: view the number assigned to the key.
Delete all
Use this menu to delete all of the entries from
Phonebook.
1. Press [ ] to check the location(s) to be cleared.
2. Press .
3. Enter the phone password and press .
4. Press twice to confirm the deletion.
27
Menu functions
Memory status
SIM AT
Use this menu to check the total number of entries
you can store and the number of the entries you have
stored in Phonebook.
This menu is available if you use a SIM AT card that
provides additional services, such as news, weather,
sports, entertainment, and location services. Available
services may vary, depending on your service
provider’s plans.
SDN
This menu is available if your SIM card supports
Service Dialling Numbers (SDN). Use this menu to
view the list of SDNs assigned by your service
provider, including emergency numbers, directory
enquiries, and voice mail numbers.
Scroll to the number you want and press or
[ ].
28
(Menu 1)
For details, see your SIM card instructions or contact
your service provider.
Use this menu to view the calls you have dialled,
received, or missed, the length of your calls, and the
cost of your calls.
To access this menu, press in Idle mode and
select Call records.
Use this menu to delete all of the records in each call
type.
1. Press [ ] to check the call type(s) to be cleared.
2. Press .
3. Press twice to confirm the deletion.
Missed calls (Menu 2.1)
Call time (Menu 2.5)
This menu displays the most recently received calls
that you did not answer.
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
• Last call time: check the length of your last call.
• Total sent: check the total length of all the calls
you have dialled.
• Total received: check the total length of all the
calls you have received.
• Reset timers: reset the call timers. You need to
enter the phone password.
Received calls (Menu 2.2)
This menu displays the most recent calls you have
received.
Dialled calls (Menu 2.3)
This menu displays the most recent calls you have
dialled.
Call records (Menu 2)
Delete all (Menu 2.4)
Menu functions
Call records (Menu 2)
The password is preset to 00000000. You can
change this password.p. 58
29
Menu functions
30
Call costs (Menu 2.6)
Network services
This network feature displays the cost of calls. This
menu is available only if your SIM card supports this
feature. Note that this is not intended to be used for
billing purposes.
• Last call cost: check the cost of your last call.
• Total cost: check the total cost of all of your calls
since your last reset the cost counter. If the total
cost exceeds the maximum cost set in Set max
cost, you must reset the counter before you can
make another call.
• Max cost: check the maximum cost limit set in
Set max cost.
• Reset counters: reset the cost counters. You
need to enter your PIN2.
• Set max cost: set the maximum cost authorised
for your calls. You need to enter your PIN2.
• Price/Unit: set the price per unit that is applied
when the cost of your calls is calculated. You need
to enter your PIN2.
Use this menu to access network services. Please
contact your service provider to check their availability
and subscribe to them, if you wish.
(Menu 3)
To access this menu, press in Idle mode and
select Network services.
Call diverting (Menu 3.1)
This network service reroutes incoming calls to a
phone number that you specify.
1. Select a call diverting option:
• Divert always: divert all calls.
• Busy: diver calls when you are on another call.
• No reply: divert calls when you do not answer
the phone.
• Unreachable: divert calls when you are not in
an area covered by your service provider or
when your phone is switched off.
• Cancel all: cancel all call diverting options.
This network service allows you to restrict your calls.
1. Select a call barring option:
• All outgoing: prohibit all outgoing calls.
• International: prohibit international calls.
• International except to home: only allow
calls to numbers within the current country
when you are abroad, and to your home
country, defined as where your home network
provider is located.
All incoming: prohibit incoming calls.
Incoming while abroad: prohibit incoming
calls when you use your phone outside of your
home country.
• Cancel all: cancel all call barring settings,
allowing calls to be sent and received normally.
• Change barring password: change the call
barring password obtained from your service
provider.
2. Select the type of calls to be barred.
3. Press . To deactivate call barring,
press .
4. Enter the call barring password supplied by your
service provider and press .
Network services (Menu 3)
Call barring (Menu 3.2)
•
•
Menu functions
2. Select the type of calls to be diverted.
3. To activate call diverting, press .
Otherwise, press and select Remove.
4. Enter the number to which calls are to be diverted
and press .
5. If you selected No reply, select the length of time
the network delays before diverting a call and
press .
31
Menu functions
Call waiting (Menu 3.3)
Caller ID (Menu 3.5)
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which the call waiting
option will apply.
2. Press . To deactivate call waiting,
press .
This network service allows you to prevent your phone
number from being displayed on the phone of the
person being called. However, some networks do not
allow the user to change this setting.
• Default: use the default setting provided by the
network.
• Hide number: ensure your number does not
display on the other person’s phone.
• Send number: send your number each time you
make a call.
Network selection (Menu 3.4)
This network service allows you to either automatically
or manually select the network used when roaming
outside of your home area.
You can select a network other than your home
network only if there is a valid roaming agreement
between the two.
• Automatic: connect to the first available network
when roaming.
• Manual: select the network you want.
32
Closed user group (Menu 3.6)
Band selection (Menu 3.7)
Use this menu to set incoming and outgoing calls to be
restricted to a selected user group. For details about
how to create a closed user group, contact your
service provider.
• Index list: list, add, or delete CUG index
numbers. Press to access the options
for setting up an index list.
• Outside access: enable calls to numbers other
than those in the Closed user group. This feature
depends on the nature of your CUG subscription.
• Default group: enable the default CUG, if you
have set one with your service provider. When
making a call, you are given the option of using
your default CUG, instead of selecting one from the
list.
• Deactivate: deactivate the CUG function, if the
default group is enabled or a CUG index is
selected.
For the phone to make and receive phone calls, it
must register with an available network.
Menu functions
Your phone can handle any of the following types of
networks: GSM 1900 and Combined GSM 900/1800.
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you must remember to change to an
appropriate band.
Network services (Menu 3)
When you select a new band, your phone
automatically searches for all available networks. Your
phone registers with a preferred network within the
band.
33
Menu functions
Sound settings
(Menu 4)
Use this menu to customise various sound settings.
To access this menu, press in Idle mode and
select Sound settings.
Ring tone (Menu 4.1)
Use this menu to select a ring tone for the call ringer.
You can select one of the default ring melodies and
downloaded sounds.
Ring volume (Menu 4.2)
Use this menu to adjust the ringer volume.
Alert type (Menu 4.3)
Use this menu to specify how you are to be informed
of incoming calls.
• Melody: the phone rings using the selected ring
tone.
• Vibration: the phone vibrates but not rings.
34
•
Vibra+melody: the phone vibrates three times
and then starts ringing.
Keypad tone (Menu 4.4)
Use this menu to select the tone that the phone
sounds when you press a key.
You can adjust the keypad tone volume using
[ / ] in Idle mode.
Message tone (Menu 4.5)
Use this menu to select a ring tone or alert type for
incoming messages.
• SMS tone: specify how you are informed of a new
SMS message.
• SMS-CB tone: specify how you are informed of a
new cell broadcast (CB) message.
• MMS tone: specify how you are informed of a new
MMS message.
Alert on call (Menu 4.6)
Messages
Use this menu to select whether or not the phone
informs you when you receive a new message or when
the time for an alarm comes during a call.
Use the Messages menu to send and receive short
messages, and multimedia messages. You can also
use the WAP push message, Voice mail, and Cell
broadcast message features.
Use this menu to select the melody that the phone
plays when it is switched on or off.
Use this menu to customise additional tones for the
phone.
• Error tone: set the phone to beep when you make
a mistake.
• Minute minder: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
• Connect tone: set the phone to beep when it is
connected to the system.
To access this menu, press in Idle mode and
select Messages.
Text messages (Menu 5.1)
Short Message Service (SMS) allows you to send or
receive text messages including pictures, melodies,
and animated images.
Messages (Menu 5)
Extra tones (Menu 4.8)
Menu functions
Power on/off (Menu 4.7)
(Menu 5)
The maximum number of characters allowed in a
short message varies by service provider. If your
message exceeds the maximum number of
characters, the phone will split the message.
35
Menu functions
36
Inbox (Menu 5.1.1)
You can view received text messages in this menu.
Outbox (Menu 5.1.2)
You can view sent or saved text messages.
While viewing a message, press to access
the following options:
• Delete: delete the message.
• Send: forward the message.
• Text reply: reply to the sender.
• Call back: call the sender.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Move to phone: move the message from the SIM
card to the phone’s memory.
• Move to SIM: move the message from the
phone’s memory to the SIM card.
• Select objects: save images or sounds from the
message into your phone.
While viewing a message, press to access
the following options:
• Delete: delete the message.
• Send: forward the message.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Move to phone: move the message from the SIM
card to the phone’s memory.
• Move to SIM: move the message from the
phone’s memory to the SIM card.
• Select objects: save images or sounds from the
message into your phone.
5. Enter a destination number.
6. Press to send the message.
Templates (Menu 5.1.4)
You can preset maximum 5 templates to write a text
message.
Menu functions
While viewing the templates list, press to
access the following options:
• Edit: edit the template.
• Send message: send the template as an SMS
message.
• Delete: delete the template.
Messages (Menu 5)
Write new (Menu 5.1.3)
You can create and send a text message.
1. Enter your message.
You can enter up to 918 standard characters, or
approximately 402 Unicode characters, such as ‘â’.
2. Press to access the following options:
• Text formatting: change the text attributes.
• Add objects: add a sound, melody, picture, or
animation to the message.
• Add templates: retrieve a text template.
• Add emoticon: retrieve an emoticon.
• Add phonebook: add a Phonebook entry.
• Add bookmark: add a web page’s address.
• Language: change the language used in T9
input mode.
3. Press and select Save and send or
Send only.
4. If you select Save and send or Save only, select
a memory location.
Emoticon templates (Menu 5.1.5)
You can preset emoticon templates and retrieve them
to use in a message.
While viewing the emoticon list, press to
access the following options:
• Add: add a new emoticon.
• Edit: edit the selected emoticon.
37
Menu functions
•
•
Send: send a message using the emoticon.
Delete: delete the emoticon.
Settings (Menu 5.1.6)
Use this menu to customise the SMS settings.
The setting options available in this menu may vary
depending on your service provider.
•
38
Setting x (where x is the setting group number):
each group has its own submenu.
Service centre: store or changes the number of
your message centre.
Default destination: store a default destination
number.
Default type: set the default message type.
Default validity: set the length of time your
messages are stored in the message centre while
the network attempts to deliver them.
Setting name: change the name of the setting
group.
•
Common settings: The following options are
available.
Reply path: allow the recipient to reply to you
through your message centre.
Delivery reports: set the network to inform you
when your message has been delivered.
Bearer selection: select the GSM or GPRS
preferred bearer type.
Character support: select a character encoding
type. If you select Automatic, the phone switches
the encoding type from GSM-alphabet to Unicode if
you enter a Unicode character. Use of Unicode
encoding will reduce the maximum number of
characters in a message to about half. If this menu
is not shown, your phone provides the Automatic
character encoding by default.
Voice mail (Menu 5.1.9)
Use this menu to store the number of the voice mail
server and access your voice mails.
You must enter the voice server number before you
can access your voice mails. Your service provider
can give the voice server number.
•
Connect to voice server: connect to the voice
server to allow you to listen to your messages. You
can also connect to the voice mail server by
pressing and holding [1] in Idle mode.
Voice server number: change the voice mail
server name or number.
Broadcast (Menu 5.1.0)
The Cell Broadcast service delivers short messages on
various topics such as the weather or traffic.
Use this menu to change the settings for the service
and access broadcast messages.
• Read: open received messages.
The Volatile box saves network messages until
the phone is switched off.
The Archive box saves network messages
indefinitely. Press and select Save
when a text notification appears. The message is
saved in the Archive box.
• Receive: enable or disable the reception of
broadcast messages.
Messages (Menu 5)
Memory status (Menu 5.1.8)
Use this menu to view the total number of text
messages you can store and the number of text
messages you have stored on the SIM card, in the
phone’s memory, or in the CB memory.
•
Menu functions
Delete all (Menu 5.1.7)
Use this menu to delete all of the text messages in
each message box.
1. Press [ ] to check the message box(es) to be
cleared.
2. Press .
3. Press twice to confirm the deletion.
39
Menu functions
•
•
Channel list: specify the channels from which you
receive broadcast messages.
Language: select the language in which broadcast
messages display.
Please contact your service provider for details.
Multimedia messages (Menu 5.2)
Multimedia Message Service (MMS) delivers messages
containing a combination of text, picture, and sound,
from phone to phone or from phone to e-mail.
Inbox (Menu 5.2.1)
This menu displays MMS messages that you have
received. The following icons tell you the message
status:
•
notification that you have read
•
notification that you have not read
•
you are retrieving from the server
•
the server is processing your request
•
the server is failed to send
40
•
•
you have read
you have not read
While viewing a message, press to access
the following message options:
• Delete: delete the message.
• Reply: reply to the sender.
• Callback: call the sender.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Forward: forward the message to another person.
• Save picture: save an image from the message
into the Images folder.
• Save sound: save a sound from the message into
the Sounds folder.
• Properties: view the properties of the message.
When you select a notification, you can access
Retrieve to retrieve the message from the MMS
server.
You can view a message and use the options the same
as in the Outbox.
Write new (Menu 5.2.4)
You can create and send an MMS message.
1. Enter a message subject and press .
2. Press and add message contents using
one of the following options:
• Add text: add message text.
• Add picture: add pictures to the message.
• Add sound: add sounds to the message.
• Send: send the message.
• Save: save the message in the Draft or
Templates box.
• Settings: change the message settings.
• Add destination: enter destination numbers
or addresses.
Messages (Menu 5)
While viewing a message, press to access
the following options:
• Delete: delete the message.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Send: send or resend the message.
• Edit message: edit the message.
• Properties: view the properties of the message.
Draft (Menu 5.2.3)
After creating a multimedia message, you can store it
in this message box for sending later.
Menu functions
Outbox (Menu 5.2.2)
This menu displays MMS messages that you have
sent. The following icons tell you the message status:
•
currently being sent
•
sent
•
your phone couldn’t send
•
to be sent
•
deferred
41
Menu functions
•
Preview: view the message you created.
The maximum size allowed for an MMS message
can differ depending on the country. If you
cannot attach another file, add another page.
3. If you want to change the added items, highlight
one and press to access the following
options:
• Edit text/picture/sound: edit the text,
picture, or sound.
• Add page: add pages. Move to each page by
pressing the Left or Right key on the message
screen.
• Delete: delete the item from your message.
• Duration: set how long one page displays.
After the specified time, the display
automatically scrolls to the next page.
4. When you have finished, select Send from the
options.
5. Select a destination type (To, Cc, Bcc).
42
6. Select one of Phone number, E-mail address, or
Phonebook.
7. Enter a destination number or an e-mail address,
or select a number from Phonebook and press
.
8. To add more destinations, select Add destination
and repeat from step 6.
9. To enter additional numbers or addresses to other
destination types, press < >and repeat from step
5.
10. When you have finished, select Send message.
Templates (Menu 5.2.5)
This menu stores messages you saved as templates so
that you can use them to create new messages.
While viewing a message template, press to
access the following options:
• Edit message: send the message using the
template.
• Delete: delete the template.
Setup (Menu 5.2.8)
You can customise the settings for sending and
receiving MMS messages.
• Delivery report: set the network to inform you
when your message has been delivered.
• Read reply: request a reply from the recipient.
•
•
•
•
•
•
•
Auto download: set whether or not your phone
retrieves new incoming messages from the MMS
server without notifications.
Message acceptance: select the category of
messages you want to receive.
Hide ID: hide your phone number on the
recipient’s phone.
Expiry date: set the length of time your messages
are stored in the message centre.
Delivery time: set the time delay before
messages are sent.
Priority: set the priority level of your messages.
Report allowed: send a delivery report from the
network to the sender.
Page duration: set how long one page in your
outgoing messages displays. After a specified time,
the display automatically scrolls to the next page.
Messages (Menu 5)
Memory status (Menu 5.2.7)
Use this menu to view the total amount of memory for
MMS messages and the amount of memory currently
in use in each message box.
•
Menu functions
Delete all (Menu 5.2.6)
Use this menu to delete all of multimedia messages in
each message box.
1. Press [ ] to check the message box(es) to be
cleared.
2. Press .
3. Press twice to confirm the deletion.
43
Menu functions
MMS profile (Menu 5.2.9)
You can configure required network settings for MMS.
The last profile accessed is automatically activated for
sending or receiving subsequent messages.
Check with your service provider before you change
any MMS settings on your phone.
•
•
•
•
•
•
•
44
Profile name: assign a name to the MMS profile.
Connection URL: enter the address of your MMS
server.
Security: select a data transmission mode.
IP address: enter the gateway address.
User name: assign the user ID.
Password: enter the password.
APN: enter the access point name used for the
address of the MMS server.
Push messages (Menu 5.3)
Use this menu to access messages from the WAP
server.
• Inbox: view push messages you have received.
• Receive: determine whether or not your phone
receives push messages.
Never: the phone rejects push messages.
Always: the phone receives all push messages.
• Delete all: delete all push messages.
Funbox
(Menu 6)
To
Press
scroll through browser items
[Up] or [Down].
To access this menu, press in Idle mode and
select Funbox.
select a browser item
[ ].
return to the previous page
[C].
WAP browser (Menu 6.1)
return to the homepage
and select
Home.
Home (Menu 6.1.1)
Use this menu to connect your phone to the network
and load the homepage of the wireless web service
provider. You can also press [ ] in Idle mode.
Funbox (Menu 6)
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
Using the WAP browser, you can access updated
information and a wide variety of media content, such
as wallpapers and ring tones.
Menu functions
The Funbox menu allows you to use the WAP browser,
play Java games, and access images and sounds
stored in the phone’s memory.
Navigating with the WAP browser
Selecting and using browser menu options
1. Press and select Menu.
2. Select one of the following browser options:
• Bookmarks: open the bookmarks list.
• Reload: reload the current page.
• Home: go back to the homepage.
• Go to URL: enter a URL address manually.
• Show URL: view the URL address of the
current web page.
45
Menu functions
•
•
•
•
Clear cache: delete information stored in the
cache.
Security info: view security information.
Inbox: read messages received from a web
server.
Show image: view the image on the current
web page in order.
Exiting the WAP browser
Press [
] to exit the browser.
Favorite (Menu 6.1.2)
Use this menu to save URL addresses to quickly access
a website.
Adding a bookmark
1. Select an empty location.
2. Enter a URL address and press .
3. Enter a name for the bookmark and press
.
46
Accessing a bookmarked page
Scroll to a bookmark item and press [ ].
Using bookmark options
After saving an item, press to access the
following options:
• Go to URL: access the website.
• Edit: edit the address and name of the bookmark.
• Delete: delete the bookmark.
http:// (Menu 6.1.3)
Use this menu to manually enter the URL address of a
website and access the website.
Settings (Menu 6.1.4)
Use this menu to set up servers for the WAP browser.
Contact your service provider for details about your
settings options.
For each server, the following options are available:
• Profile name: assign a name to the server profile.
• Homepage URL: set the address of your
homepage.
• Security: select a data transmission mode.
• Bearer: select a bearer for each type of network
address accessed; GPRS or Data.
•
When the bearer is set to GPRS:
• IP address: enter the WAP gateway address.
• User name: enter the user ID.
• Password: enter the password.
• APN: enter the access point name of the GPRS
network gateway.
Games (Menu 6.2)
Clear cache (Menu 6.1.5)
Use this menu to clear the cache, which is the
temporary memory that stores the web pages you
have recently accessed.
Menu functions
You can download MIDlets (Java applications that run
on mobile phones) from various sources using the
WAP browser, and store them in your phone.
Funbox (Menu 6)
When the bearer is set to Data:
• IP address: enter the WAP gateway address.
• Login name: enter the user ID.
• Password: enter the password.
•
Dial-up number: enter the PPP server phone
number.
Data call type: select a data call type.
Java services may not available, depending on your
service provider.
Launching a MIDlet
1. Select the MIDlet you want on the games list.
2. On the startup screen of the MIDlet, you can
access the following options:
47
Menu functions
START GAME: start a new game.
CONTINUE: continue the last game you
played.
• HIGH SCORE: view the high score table. This
option may not be available for some games.
• HOW TO PLAY: view how to play the game
and the key functions for the game.
• OPTION: switch on or off the game sound.
3. Press [ ] to confirm your selection.
Sounds (Menu 6.3)
Viewing MIDlet information
Scroll to the MIDlet you want and press .
Images (Menu 6.4)
•
•
Changing DNS settings
You may need to change the DNS setting of the Java
server at your service provider’s instructions.
1. Select Setting on the Games list.
2. Enter the primary address and press .
3. Enter the secondary address and press .
48
This menu displays sounds downloaded from the
wireless web or received in messages.
While accessing a sound, press to access
the following options:
• Rename: change the name of the sound.
• Delete: delete the sound.
• Set as ringtone: set the sound as your ring tone.
This menu displays images downloaded from the
wireless web or received in messages.
While accessing an image, press to access
the following options:
• Rename: change the name of the image.
• Delete: delete the image.
• Set as wallpaper: set the image as your
wallpaper for the idle screen.
Delete all (Menu 6.5)
Organiser
You can delete all of the downloaded items in the
Games, Sounds, and Images folders.
1. Press [ ] to check the folder(s) to be cleared.
2. Press .
3. Press twice to confirm the deletion.
The Organiser feature enables you to keep track of
your schedule and tasks, and to make a voice memo.
You can also set the time and date and use convenient
features, such as alarms, calculator, and currency
exchange.
To access this menu, press in Idle mode and
select Organiser.
Alarm (Menu 7.1)
Organiser (Menu 7)
You can check the total amount of memory for media
items and the amount of memory currently in use in
each media folder.
Menu functions
Memory status (Menu 6.6)
(Menu 7)
Use this menu to set alarms to ring at a specific time.
Setting an alarm
1. Select the type of alarm.
2. Enter the time for the alarm to sound.
3. Select AM or PM in 12-hour time format.
Your phone is preset to a 24-hour format. You
can change the time format.p. 51
49
Menu functions
4. If you selected Morning call in step 1, choose
Monday to friday or Monday to saturday.
Stopping an alarm
• When the alarm sounds, press any key.
• To remove an alarm set, access it, press
and select Remove alarm.
• To remove all alarm sets, select Remove alarm
from the Alarm menu.
Setting the alarm to ring even if the phone is
off
From the Alarm screen, select Autopower → Enable.
If the phone is off when it is time for the alarm to ring,
the phone switches on and sounds the alarm.
Calendar (Menu 7.2)
Use this menu to consult the calendar, write memos,
or set alarms to act as a reminder.
Writing a memo
1. Select a date on the calendar.
Press [ / ] to move to the next or previous
month.
2. Enter your memo and press .
3. Press [ ] to set an alarm to ring on the chosen
day.
Otherwise, press .
4. Enter the time for the alarm and press .
To select an alarm melody, press .
5. Select AM or PM in 12-hour format.
Your phone is set to a 24-hour format. You can
change the format.p. 51
The colour of the date on the calendar changes to
pink to indicate that a memo exists for that date.
50
Use this menu to change the time and date displayed
on your phone. Before setting the time and date,
specify your time zone in World time.
• Set time: enter the current time.
• Set date: enter the current date.
• World time: set your local time zone and find out
what time it is in another part of the world.
• Time format: select 12-hour or 24-hour time
format.
Organiser (Menu 7)
While viewing a memo, press to access
the following options:
• New: add a new memo.
• Edit: edit the memo.
• Alarm: set an alarm for the memo.
• Delete: delete the memo.
• Copy to: copy the memo to another date.
• Move to: change the date of the memo.
Time & Date (Menu 7.3)
Menu functions
Viewing a memo
On the calendar screen, press to access
the following options:
• Search all: view all of the memos you created.
• Delete all: delete all memos.
• Go to date: go to a specific date.
• Exit: exit the calendar feature.
Calculator (Menu 7.4)
Use this menu to perform basic arithmetic functions
such as addition, subtraction, multiplication, and
division.
1. Enter the first number.
Press the left soft key to insert a decimal point and
a bracket.
Press [ ] or [ ] to move the cursor.
51
Menu functions
2. Press the Navigation keys to access the math
function you want.
3. Enter the second number.
4. Press [ ] to view the result.
To do list (Menu 7.5)
Use this menu to create tasks and manage them.
Creating the To do list
1. Press .
2. Enter the first task and press .
3. Select a priority level.
4. Enter your deadline and press [ ].
Otherwise, press .
Viewing the To do list
When you select the To do list menu, the tasks display
with a check mark, if the task has been done, and a
priority level indicator;
for High,
for Normal,
and
for Low.
52
To change the status of a specific task, press [ ].
While viewing a task from the list or the details for the
task, press to access the following
options:
• New: add a new task.
• Mark: change the status of the task.
• Edit: edit the task.
• Sort: sort the task by priority or status.
• Copy: copy the task.
• Copy to calendar: copy the task to the calendar
as a memo.
• Delete: delete the task.
• Delete all: delete all tasks.
• Exit: exit the To do list menu.
Voice memo (Menu 7.6)
Use this menu to record voice memos. A voice memo
can be up to 30 seconds.
Press to access the following options:
• Play: play back your voice memo.
• Send: send the voice memo via MMS.
• Rename: change the name of the voice memo.
• Information: view the properties of the voice
memo.
• Delete: delete the voice memo.
Menu functions
Organiser (Menu 7)
Voice record (Menu 7.6.1)
1. Press to start recording.
2. Speak into the microphone.
3. When you press , or if the recording time
expires, the following options display:
• Replay: play back your memo.
• Re-record: discard the memo and record
another one.
• Save: save the memo.
• Quit: cancel your recording and exit the Voice
record menu.
4. Select Save to save the voice memo.
5. Enter a name of the voice memo and press .
Memo list (Menu 7.6.2)
Use this menu to access the list of voice memos you
have recorded.
Delete all (Menu 7.6.3)
Use this menu to delete all of the voice memos you
have recorded at one time.
Memory status (Menu 7.6.4)
You can check the total amount of memory and the
amount of memory currently in use for voice memos.
53
Menu functions
54
Currency exchange (Menu 7.7)
FM radio
Use this menu to do currency conversions.
1. Enter the rate of foreign currency and press
.
You can enter a decimal point (.) using the [ ] key.
2. Enter the amount of the source currency you want
to convert and press .
The amount you entered and its equivalent value
in the foreign currency display.
Use this menu to listen to the FM radio on your phone
using the headset.
(Menu 8)
To access this menu, press in Idle mode and
select FM radio.
Finding and setting radio channels
1. Plug the connector of the headset into the jack on
the left side of the phone.
2. Access the FM radio menu.
3. Press [Left] or [Right] to manually find the
frequency of a radio channel you want.
4. Press and select Add.
5. Enter a name for the channel and press
twice.
6. Select an empty location.
On the FM radio screen, press to access
the following radio options:
• Power on/off: turn the radio on or off.
• Add: store up to 30 radio channels.
• Edit: edit the name and frequency of the channel.
• Auto save: let the phone automatically scan
through and save available radio frequencies.
• Remove: remove the selected channel or all
channels.
• Pop-up alert: set the phone to alert you to listen
to the radio at a specific time. When the pop-up
notification appears on the screen, press
to turn on the specified radio channel.
• Settings: configure the settings for using an FM
radio.
Volume: set the radio volume.
Mode: select an audio mode, Speaker or
Earphone.
• You can answer an incoming call or use other
phone functions while listening to the radio.
• The quality of the radio broadcast depends on
the radio station’s coverage in that particular
area.
3. To turn off the radio, press and use
the Power on/off option.
Otherwise, just disconnect the headset.
FM radio (Menu 8)
Using radio options
1. From the FM radio screen, press [Up] or [Down] to
scroll to the radio channel.
2. Press and select Power on/off → On.
Press [ / ] to adjust the volume.
Menu functions
Listening to the radio
55
Menu functions
Phone settings
(Menu 9)
Use this menu to customise your phone settings. You
can also reset the settings to their default values.
To access this menu, press in Idle mode and
select Phone settings.
Infrared activate (Menu 9.1)
This feature allows you to send or receive data
through the infrared port. To use an infrared
connection to your computer, you must:
• Configure and activate an IrDA-compliant infrared
port on the computer.
• Activate the infrared feature on the phone (the
IrDA icon ( ) appears on the top line).
• Align the IrDA port on the
phone with the IrDA port on
the your computer.
56
If there is no communication between your phone and
the IrDA-compliant device within 30 seconds of
activating the feature, it is automatically deactivated.
Display settings (Menu 9.2)
Use this menu to change settings for the display and
light.
Wallpaper (Menu 9.2.1)
You can change the background image and the
settings for the text in Idle mode.
• Wallpaper list: select a background image.
• Text display: determine the phone displays the
time and date.
• Text colour: select a colour of the text.
Keypad lock (Menu 9.2.2)
You can set the phone to lock the keypad manually or
automatically.
Contrast (Menu 9.2.3)
You can adjust the brightness of the display for
varying lighting conditions.
Greeting message (Menu 9.3)
Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
Language (Menu 9.5)
Use this menu to select one of several languages for
the display text.
Phone settings (Menu 9)
Graphic logo (Menu 9.2.5)
Use this menu to display your service provider’s logo
instead of its name.
Use this feature to check your phone numbers, or to
assign a name to each of the numbers. Changes made
here do not affect the actual subscriber numbers on
your SIM card.
Menu functions
Backlight (Menu 9.2.4)
You can select the length of time the backlight and the
display stay on.
• On: select the length of time the backlight is on.
• Dim: select the length of time the display is in
Dimming mode after the backlight turns off. After a
specified time, the display turns off.
Own number (Menu 9.4)
Security (Menu 9.6)
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
If you enter an incorrect PIN /PIN 2 three times in
succession, the SIM card is blocked. To unblock it
you need to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are supplied by your
network operator.
57
Menu functions
PIN check (Menu 9.6.1)
The 4-to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
Change PIN (Menu 9.6.2)
Use this menu to change your PIN. The PIN Check
feature must be enabled to use this feature.
Phone lock (Menu 9.6.3)
The Phone lock feature locks the phone from
unauthorised use.
When this feature is enabled, you must enter a 4- to
8-digit phone password each time the phone is
switched on.
The password is preset to 00000000. To change the
password, use the Change password menu.
58
Change password (Menu 9.6.4)
Use this menu to change your phone password. The
password is preset to 00000000.
Privacy (Menu 9.6.5)
Use this menu to lock your media contents, including
MMS messages, voice memos, images, and sounds.
1. Press [ ] to check the item(s) to be locked.
2. Press to lock the marked items.
3. Enter the phone password and press .
To access a locked item, you need to enter the phone
password.
SIM lock (Menu 9.6.6)
The SIM lock feature allows your phone to work only
with the current SIM by assigning a SIM lock code. You
must enter the SIM lock code to use a different SIM
card.
Extra settings (Menu 9.7)
You can turn the automatic redialling or answering
features on or off.
• Auto redial: make up to ten attempts to redial a
phone number after an unsuccessful call.
• Anykey answer: answer an incoming call by
pressing any key, except and [ ].
When this option is set to Off, you must press
or [ ] to answer a call.
You can use the Navigation keys as shortcut keys to
access specific menus directly from Idle mode. Use
this menu to change these shortcut assignments.
1. Select the key to be used as a shortcut key.
2. Scroll to the menu that will be assigned to the key.
3. Press .
Reset settings (Menu 9.9)
Use this menu to reset the phone to its default
settings.
Phone settings (Menu 9)
Change PIN2 (Menu 9.6.8)
If supported by your SIM card, the Change PIN2
feature changes your current PIN2.
Short cut (Menu 9.8)
Menu functions
FDN mode (Menu 9.6.7)
If supported by your SIM card, Fixed Dialing Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored in
Phonebook. To use this feature, you must enter your
PIN2.
Enter the 4- to 8-digit phone password and press
.
The password is preset to 00000000. You can
change this password.p. 58
59
Solve problems
To save the time and expense of an unnecessary service
call, perform the simple checks in this section before
contacting a service professional.
When you switch on your phone, the following
messages may appear:
“Insert SIM card”
• Be sure that the SIM card is correctly installed.
“Phone locked enter password”
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
“Enter PIN”
• You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
• The PIN Check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu.
60
“Enter PUK”
•
The PIN code has been entered incorrectly three
times in succession, and the phone is now blocked.
Enter the PUK supplied by your service provider.
“No Service,” “Network Failure,” or “Not
Done” displays
• The network connection has been lost. You may be
in a weak signal area. Move and try again.
• You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
You have entered a number but it was not
dialled
• Be sure that you have pressed [ ].
• Be sure you have accessed the right cellular
network.
• Be sure that you have not set an outgoing call
barring option.
Your correspondent cannot reach you
• Be sure your phone is switched on. ([ ] pressed
for more than one second.)
• Be sure you are accessing the correct cellular
network.
• Be sure that you have not set an incoming call
barring option.
•
Your correspondent cannot hear you speaking
• Be sure you have switched on the microphone.
• Be sure you are holding the phone close enough to
your mouth. The microphone is located at the
bottom of the phone.
If the above guidelines do not help you to
solve the problem, take note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
The phone starts beeping and “Battery low”
flashes on the display
Then contact your local dealer or Samsung after-sales
service.
Your battery is insufficiently charged. Recharge the
battery.
No number is dialled when you re-call a
Contacts entry
• Use the Phonebook Search feature to ensure the
number has been stored correctly.
• Re-store the number, if necessary.
Solve problems
•
Try moving the phone slightly or moving closer to a
window if you are in a building.
The audio quality of the call is poor
• Check the signal strength indicator on the display
). The number of bars indicates the signal
strength from strong (
) to weak ( ).
61
safety-end-NorthA
1/27/03
2:05 PM
Page 125
Health and Safety
Information
Exposure to Radio Frequency (RF) Signals
Your wireless phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications Commission
(FCC) of the U.S. Government. These limits are part of
comprehensive guidelines and establish permitted
levels of RF energy for the general population. The
guidelines are based on the safety standards that were
developed by independent scientific organizations
through periodic and through evaluation of scientific
studies.
The standards include a substantial safety margin
designed to assure the safety of all persons, regardless
of age and health.
The exposure standard for wireless phones employs a
unit of measurement known as Specific Absorption
Rate (SAR). The SAR limit set by the FCC is 1.6W/kg *.
*In the U.S. and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg)
averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give
additional protection for the public and to account for any variations in measurements.
125
safety-end-NorthA
1/27/03
2:05 PM
Page 126
Health and Safety Information
SAR tests are conducted using standard operating
positions specified by the FCC with the phone
transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power levels
so as to use only the power required to reach the
network. In general, the closer you are to a wireless
base station antenna, the lower the power output of
the phone.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that
it does not exceed the limit established by the
government-adopted requirement for safe exposure.
The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by
the FCC for each model. While there may be
differences between the SAR levels of various phones
and at various positions, they all meet the government
requirement.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID
printed in the label on the phone.
Health and Safety Information
For Body Operation
To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories
that maintain a 1.5 cm. separation distance between the
user's body and the back of the phone, including the
antenna. The use of belt-clips, holsters and similar
accessories should not contain metallic components
in its assembly. The use of accessories that do not
satisfy these requirements may not comply with FCC
RF exposure requirements, and should be avoided.
For more Information concerning exposure to radio
frequency signals, see the following websites:
Federal Communications Commission (FCC)
http://www.fcc.gov/rfsafety
Cellular Telecommunications Industry Association (CTIA):
http://www.wow-com.com
U.S.Food and Drug Administration (FDA)
http://www.fda.gov/cdrh/consumer
World Health Organization (WHO)
http://www.who.int/peh-emf/en
FCC certification information for this model phone is
attached separation paper.
126
127
safety-end-NorthA
1/27/03
2:05 PM
Page 128
Health and Safety Information
Precautions When Using Batteries
• Never use any charger or battery that is damaged in
any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time to
buy a new battery.
• If left unused, a fully charged battery will discharge
itself over time.
• Use only Samsung-approved batteries and recharge
your battery only with Samsung-approved chargers.
When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to
a charger for more than a week, since overcharging
may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
128
Health and Safety Information
• Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and lifetime of the battery.
Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime.
But an important responsibility accompanies the
benefits of wireless phones, one that every user
must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of
a car, practice good common sense and remember
the following tips.
129
safety-end-NorthA
1/27/03
2:05 PM
Page 130
Health and Safety Information
1. Get to know your wireless phone and its features,
such as speed dial and redial. If available, these
features help you to place your call without taking
your attention off the road.
2. When available, use a hands-free device. If
possible, add an extra layer of convenience and
safety to your wireless phone with one of the
many hands-free accessories available today.
3. Position your wireless phone within easy reach. Be
able to access your wireless phone without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your
voice mail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain,
sleet, snow, ice and even heavy traffic can be
hazardous.
5. Do not take notes or look up phone numbers while
driving. Jotting down a To Do list or flipping
through your phonebook takes your attention away
from your primary responsibility, driving safely.
Health and Safety Information
7. Do not engage in stressful or emotional
conversations that may be distracting. Make the
people with whom you are talking aware that you
are driving and suspend conversations that have
the potential to divert your attention from the
road.
8. Use your wireless phone to call for help. Dial the
emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it is
a free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. If you see a car accident, crime in
progress or other serious emergency where lives
are in danger, call the emergency number, as you
would want others to do for you.
10. Call roadside assistance or a special nonemergency wireless assistance number when
necessary. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal,
a minor traffic accident where no one appears
injured, or a vehicle you know to be stolen, call
roadside assistance or any other special nonemergency wireless number.
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car
will be stationary. If you need to make a call while
moving, dial only a few numbers, check the road
and your mirrors, then continue.
130
131
safety-end-NorthA
1/27/03
2:05 PM
Page 132
Health and Safety Information
Health and Safety Information
Operating Environment
Wireless Technology Research.
Remember to follow any special regulations in force
in any area and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger.
Persons with pacemakers:
• Should always keep the phone more than 15 cm (6
inches) from their pacemaker when the phone is
switched on
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimize potential interference
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it is
recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
Electronic Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be maintained
between a wireless phone and a pacemaker to avoid
potential interference with the pacemaker. These
recommendations are consistent with the
independent research and recommendations of
132
If you have any reason to suspect that interference is
taking place, switch off your phone immediately.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such interference,
you may wish to consult your hearing aid
manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical devices,
consult the manufacturer of your device to determine
if it is adequately shielded from external RF energy.
Your physician may be able to assist you in obtaining
this information. Switch off your phone in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care
facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
133
safety-end-NorthA
1/27/03
2:05 PM
Page 134
Health and Safety Information
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Switch off your phone in any facility where posted
notices require you to do so.
Health and Safety Information
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should
never rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Potentially Explosive Atmosphere s
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not be
possible on all wireless phone networks or when
certain network services and/or phone features are in
use. Check with local service providers.
Users are advised to switch off the phone while at a
refueling point (service station). Users are reminded
of the need to observe restrictions on the use of
radio equipment in fuel depots (fuel storage and
distribution areas), chemical plants or where blasting
operations are in progress.
To make an emergency call, proceed as follows.
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location. Emergency numbers vary by
location.
3. Press the key.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
If certain features are in use (call barring, for example),
you may first need to deactivate those features before
you can make an emergency call. Consult this
document and your local cellular service provider.
134
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut
off the call until given permission to do so.
135
safety-end-NorthA
1/27/03
2:05 PM
Page 136
Health and Safety Information
Health and Safety Information
Other Important Safety Information
Care and Maintenance
• Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as the
phone, its parts or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or in
the air bag deployment area. If wireless equipment
is improperly installed and the air bag inflates,
serious injury could result.
• Keep the phone and all its parts and accessories
out of the reach of small children’s.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode
electronic circuits.
• Do not touch the phone with a wet hand while it is
charging. Doing so may cause an electric shock to
you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas,
as its moving parts may be damaged.
• Switch off your phone before boarding an aircraft.
The use of wireless phones in aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the phone,
which may damage the phone’s electronic circuit
boards.
136
137
safety-end-NorthA
1/27/03
2:05 PM
Page 138
Health and Safety Information
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with a
soft cloth slightly dampened in a mild soap-and-water
solution.
• Do not paint it. Paint can clog the device’s moving
parts and prevent proper operation.
• Do not put the phone in or on heating devices, such as
a microwave oven, a stove or a radiator. The phone
may explode when overheated.
• Use only the supplied or an approved replacement
antenna. Unauthorized antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger or any accessory is not
working properly, take it to your nearest qualified
service facility. The personnel there will assist you,
and if necessary, arrange for service.
138
Health and Safety Information
Acknowledging Special Precautions and the FCC
and Industry Canada Notice
Cautions
Modifications not expressly approved by the party
responsible for compliance could void the user's authority
to operate the equipment. FCC Compliance Information
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received.
Including interference that may cause undesired
operation.
Information to User
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following measures:
139
safety-end-NorthA
1/27/03
2:05 PM
Page 140
Health and Safety Information
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/ TV
technician for help.
Appendix
Appendix A: CERTIFICATION INFORMATION (SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
emission limits for exposure to radio frequency(RF)
energy set by the Federal Communications Commission
of the U.S. Government. These limits are part of
comprehensive guidelines and establish permitted
levels of RF energy for the general population. The
guidelines are based on safety standards that were
developed by independent scientific organizations
through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety
margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate(SAR). The SAR limit set by the FCC is
1.6 W/kg. SAR Tests are conducted using standard
operating positions accepted by the FCC with the
phone transmitting at its highest certified power level
in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power levels
so as to use only the power required to reach the
network. In general, the closer you are to a wireless
base station antenna, the lower the power output.
140
141
safety-end-NorthA
1/27/03
2:05 PM
Page 142
Appendix
Appendix
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the limit established by the governmentadopted requirement for safe exposure. The tests are
performed in positions and locations(e.g., at the ear and
worn on the body) as required by the FCC for each
model.
Appendix B: Guide to Safe and Responsible Wireless
Phone Use
The highest SAR values for this model phone as reported
to the FCC are Head: 0.266W/Kg, Body-worn: 0.307W/Kg.
TENS OF MILLIONS OF PEOPLE IN THE U.S. TODAY TAKE
ADVANTAGE OF THE UNIQUE COMBINATION OF
CONVENIENCE, SAFETY AND VALUE DELIVERED BY THE
WIRELESS TELEPHONE. QUITE SIMPLY, THE WIRELESS
PHONE GIVES PEOPLE THE POWERFUL ABILITY TO
COMMUNICATE BY VOICE-ALMOST ANYWHERE,
ANYTIME-WITH THE BOSS, WITH A CLIENT, WITH THE
KIDS, WITH EMERGENCY PERSONNEL OR EVEN WITH
THE POLICE. EACH YEAR, AMERICANS MAKE BILLIONS
OF CALLS FROM THEIR WIRELESS PHONES, AND THE
NUMBERS ARE RAPIDLY GROWING.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as
in compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID
A3LSGHC230.
In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6
watts/kilogram(W/kg) averaged over one gram of tissue.
The standard incorporates a substantial margin of safety
to give additional protection for the public and to
account for any variations in measurements.
142
Cellular Telecommunications & Internet Association
“Safety is the most important call you will ever make.”
A Guide to Safe and Responsible Wireless Phone Use
But an important responsibility accompanies those
benefits, one that every wireless phone user must
uphold. When driving a car, driving is your first
responsibility. A wireless phone can be an invaluable
tool, but good judgment must be exercised at all times
while driving a motor vehicle-whether on the phone or
not.
The basic lessons are ones we all learned as teenagers.
Driving requires alertness, caution and courtesy. It
requires a heavy dose of basic common sense-keep your
head up, keep your eyes on the road, check your mirrors
frequently and watch out for other drivers. It requires
obeying all traffic signs and signals and staying within
the speed limit. It means using seatbelts and requiring
other passengers to do the same.
143
safety-end-NorthA
1/27/03
2:05 PM
Page 144
Appendix
But with wireless phone use, driving safely means a
little more. This brochure is a call to wireless phone
users everywhere to make safety their first priority when
behind the wheel of a car. Wireless telecommunications
is keeping us in touch, simplifying our lives, protecting us
in emergencies and providing opportunities to help
others in need. When it comes to the use of wireless
phones, safety is your most important call.
Wireless Phone “Safety Tips”
Below are safety tips to follow while driving and using a
wireless phone which should be easy to remember.
1. Get to know your wireless phone and its features such
as speed dial and redial. Carefully read your instruction
manual and learn to take advantage of valuable features
most phones offer, including automatic redial and
memory. Also, work to memorize the phone keypad so
you can use the speed dial function without taking your
attention off the road.
2. When available, use a hands free device. A number of
hands free wireless phone accessories are readily
available today. Whether you choose an installed
mounted device for your wireless phone or a speaker
phone accessory, take advantage of these devices if
available to you.
3. Position your wireless phone within easy reach. Make
sure you place your wireless phone within easy reach
and where you can grab it without removing your eyes
from the road. If you get an incoming call at an
inconvenient time, if possible, let your voice mail answer
it for you.
144
Appendix
4. Suspend conversations during hazardous driving
conditions or situations. Let the person you are speaking
with know you are driving; if necessary, suspend the call
in heavy traffic or hazardous weather conditions. Rain,
sleet, snow and ice can be hazardous, but so is heavy
traffic. As a driver, your first responsibility is to pay
attention to the road.
5. Do not take notes or look up phone numbers while
driving. If you are reading an address book or business
card, or writing a “to do” list while driving a car, you are
not watching where you are going. It’s common sense.
Don’t get caught in a dangerous situation because you
are reading or writing and not paying attention to the
road or nearby vehicles.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan your calls before you begin your trip or
attempt to coincide your calls with times you may be
stopped at a stop sign, red light or otherwise stationary.
But if you need to dial while driving, follow this simple
tip-dial only a few numbers, check the road and your
mirrors, then continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Stressful or emotional
conversations and driving do not mix-they are distracting
and even dangerous when you are behind the wheel of a
car. Make people you are talking with aware you are
driving and if necessary, suspend conversations which
have the potential to divert your attention from the road.
145
safety-end-NorthA
1/27/03
2:05 PM
Page 146
Appendix
Appendix
8. Use your wireless phone to call for help. Your wireless
phone is one of the greatest tools you can own to
protect yourself and your family in dangerous situationswith your phone at your side, help is only three numbers
away. Dial 9-1-1 or other local emergency number in the
case of fire, traffic accident, road hazard or medical
emergency. Remember, it is a free call on your wireless
phone!
their responsibilities as safe drivers and good citizens.
As we approach a new century, more and more of us will
take advantage of the benefits of wireless telephones.
And, as we take to the roads, we all have a
responsibility to drive safely.
9. Use your wireless phone to help others in
emergencies. Your wireless phone provides you a perfect
opportunity to be a “Good Samaritan” in your community.
If you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1
or other local emergency number, as you would want
others to do for you.
Cellular Telecommunications & Internet Association
For more information, please call 1-888-901-SAFE.
For updates: http://www.wowcom.com/consumer/issues/driving/articles.cfm?ID=85
“The wireless industry reminds you to use your phone
safely when driving.”
10. Call roadside assistance or a special wireless nonemergency assistance number when necessary. Certain
situations you encounter while driving may require
attention, but are not urgent enough to merit a call for
emergency services. But you still can use your wireless
phone to lend a hand. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured or a
vehicle you know to be stolen, call roadside assistance
or other special non-emergency wireless number.
Careless, distracted individuals and people driving
irresponsibly represent a hazard to everyone on the road.
Since 1984, the Cellular Telecommunications Industry
Association and the wireless industry have conducted
educational outreach to inform wireless phone users of
146
147
safety-end-NorthA
1/27/03
2:05 PM
Page 148
Appendix
Appendix
Appendix C: Consumer Update on Wireless Phones
U.S. Food and Drug Administration
1. What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held
wireless phones with built-in antennas, often called cell,
mobile, or PCS phones. These types of wireless phones
can expose the user to measurable radiofrequency
energy (RF) because of the short distance between the
phone and the user s head. These RF exposures are
limited by Federal Communications Commission safety
guidelines that were developed with the advice of FDA
and other federal health and safety agencies. When the
phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person’s RF
exposure decreases rapidly with increasing distance
from the source. The so-called “cordless phones,” which
have a base unit connected to the telephone wiring in a
house, typically operate at far lower power levels, and
thus produce RF exposures well within the FCC’s
compliance limits.
low level RF that does not produce heating effects
causes no known adverse health effects. Many studies
of low level RF exposures have not found any biological
effects. Some studies have suggested that some
biological effects may occur, but such findings have not
been confirmed by additional research. In some cases,
other researchers have had difficulty in reproducing
those studies, or in determining the reasons for
inconsistent results.
3. What is FDA’s role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new
drugs or medical devices. However, the agency has
authority to take action if wireless phones are shown to
emit radiofrequency energy (RF) at a level that is
hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of
the health hazard and to repair, replace or recall the
phones so that the hazard no longer exists.
2. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any
health problems are associated with using wireless
phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of
radiofrequency energy (RF) in the microwave range while
being used. They also emit very low levels of RF when in
the stand-by mode. Whereas high levels of RF can
produce health effects (by heating tissue), exposure to
148
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
Support needed research into possible biological effects
of RF of the type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device
function; and
Cooperate in providing users of wireless phones with the
149
safety-end-NorthA
1/27/03
2:05 PM
Page 150
Appendix
Appendix
best possible information on possible effects of wireless
phone use on human health
4. What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radiofrequency energy (RF).
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information
Administration
FDA has been a leading participant in the World Health
Organization International Electromagnetic Fields (EMF)
Project since its inception in 1996. An influential result
of this work has been the development of a detailed
agenda of research needs that has driven the
establishment of new research programs around the
world. The Project has also helped develop a series of
public information documents on EMF issues.
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States must
comply with FCC safety guidelines that limit RF exposure.
FCC relies on FDA and other health agencies for safety
questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than
those they can get from wireless phones. Base stations
are thus not the primary subject of the safety questions
discussed in this document.
150
FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research
and Development Agreement (CRADA) to do research on
wireless phone safety. FDA provides the scientific
oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone users.
The CRADA will also include a broad assessment of
additional research needs in the context of the latest
research developments around the world.
5. What steps can I take to reduce my exposure to
radiofrequency energy from my wireless phone?
151
safety-end-NorthA
1/27/03
2:05 PM
Page 152
Appendix
If there is a risk from these products—and at this point
we do not know that there is—it is probably very small.
But if you are concerned about avoiding even potential
risks, you can take a few simple steps to minimize your
exposure to radiofrequency energy (RF). Since time is a
key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless
phone will reduce RF exposure.
If you must conduct extended conversations by wireless
phone every day, you could place more distance between
your body and the source of the RF, since the exposure
level drops off dramatically with distance. For example,
you could use a headset and carry the wireless phone
away from your body or use a wireless phone connected
to a remote antenna
Again, the scientific data do not demonstrate that
wireless phones are harmful. But if you are concerned
about the RF exposure from these products, you can use
measures like those described above to reduce your RF
exposure from wireless phone use.
6. What about children using wireless phones?
The scientific evidence does not show a danger to users
of wireless phones, including children and teenagers. If
you want to take steps to lower exposure to
radiofrequency energy (RF), the measures described
above would apply to children and teenagers using
wireless phones. Reducing the time of wireless phone
use and increasing the distance between the user and
the RF source will reduce RF exposure.
152
Appendix
Some groups sponsored by other national governments
have advised that children be discouraged from using
wireless phones at all. For example, the government in
the United Kingdom distributed leaflets containing such
a recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly
precautionary; it was not based on scientific evidence
that any health hazard exists.
7. Do hands-free kits for wireless phones reduce risks
from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free kits
can be used with wireless phones for convenience and
comfort. These systems reduce the absorption of RF
energy in the head because the phone, which is the
source of the RF emissions, will not be placed against
the head. On the other hand, if the phone is mounted
against the waist or other part of the body during use,
then that part of the body will absorb more RF energy.
Wireless phones marketed in the U.S. are required to
meet safety requirements regardless of whether they are
used against the head or against the body. Either
configuration should result in compliance with the safety
limit.
8. Do wireless phone accessories that claim to shield the
head from RF radiation work?
153
safety-end-NorthA
1/27/03
2:05 PM
Page 154
Appendix
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that accessories that claim to shield the head
from those emissions reduce risks. Some products that
claim to shield the user from RF absorption use special
phone cases, while others involve nothing more than a
metallic accessory attached to the phone. Studies have
shown that these products generally do not work as
advertised. Unlike “hand-free” kits, these so-called
“shields” may interfere with proper operation of the
phone. The phone may be forced to boost its power to
compensate, leading to an increase in RF absorption. In
February 2002, the Federal trade Commission (FTC)
charged two companies that sold devices that claimed to
protect wireless phone users from radiation with making
false and unsubstantiated claims. According to FTC,
these defendants lacked a reasonable basis to
substantiate their claim.
9. What about wireless phone interference with medical
equipment?
Radiofrequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones.
This test method is now part of a standard sponsored by
the Association for the Advancement of Medical
instrumentation (AAMI). The final draft, a joint effort by
FDA, medical device manufacturers, and many other
groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers
and defibrillators are safe from wireless phone EMI.
154
Appendix
FDA has tested hearing aids for interference from
handheld wireless phones and helped develop a
voluntary standard sponsored by the Institute of
Electrical and Electronic Engineers (IEEE). This standard
specifies test methods and performance requirements for
hearing aids and wireless phones so that that no
interference occurs when a person uses a compatible
phone and a compatible hearing aid at the same time.
This standard was approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmful interference be found to occur, FDA will conduct
testing to assess the interference and work to resolve
the problem.
10. What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radiofrequency energy (RF)
exposures characteristic of wireless phones have yielded
conflicting results that often cannot be repeated in other
laboratories. A few animal studies, however, have
suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However,
many of the studies that showed increased tumor
development used animals that had been genetically
engineered or treated with cancer-causing chemicals so
as to be pre-disposed to develop cancer in the absence
of RF exposure. Other studies exposed the animals to RF
for up to 22 hours per day. These conditions are not
similar to the conditions under which people use
wireless phones, so we don t know with certainty what
155
safety-end-NorthA
1/27/03
2:05 PM
Page 156
Appendix
the results of such studies mean for human health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use of
wireless phones and primary brain cancer, glioma,
meningioma, or acoustic neuroma, tumors of the brain or
salivary gland, leukemia, or other cancers. None of the
studies demonstrated the existence of any harmful
health effects from wireless phone RF exposures.
However, none of the studies can answer questions
about long-term exposures, since the average period of
phone use in these studies was around three years.
11. What research is needed to decide whether RF
exposure from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological
studies of people actually using wireless phones would
provide some of the data that are needed. Lifetime
animal exposure studies could be completed in a few
years. However, very large numbers of animals would be
needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide
data that is directly applicable to human populations, but
10 or more years follow-up may be needed to provide
answers about some health effects, such as cancer. This
is because the interval between the time of exposure to
a cancer-causing agent and the time tumors develop - if
they do - may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in
measuring actual RF exposure during day-to-day use of
wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which
model of phone is used.
156
Appendix
12. Which other federal agencies have responsibilities
related to potential RF health effects?
Additional information on the safety of RF exposures from
various sources can be obtained from the following
organizations.
FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
Occupational Safety and Health Administration’s (OSHA):
http://www.oshaslc.gov/SLTC/radiofrequencyradiation/index.html
National Institute for Occupational Safety and Health
(NIOSH):
http://www.cdc.gov/niosh/emfpg.html
World health Organization (WHO):
http://www.who.int/peh-emf/
International Commission on Non-Ionizing Radiation
Protection:
http://www.icnirp.de
National Radiation Protection Board (UK):
http://www.nrpb.org.uk
Updated 4/3/2002: US Food and Drug Administration
http://www.fda.gov/cellphones
157
Index
ABC mode, text input • 19
Alarm • 49
Alert • 34, 35
Answering
call • 22
second call • 24
Anykey answer • 59
Auto redial • 59
Backlight time, set • 57
Band selection • 33
Barring, calls • 31
Battery
charging • 7
low indicator • 8
precautions • 63
Broadcast messages • 39
Browser, WAP • 45
68
Calculator • 51
Call costs • 30
Call records
dialled • 29
missed • 29
received • 29
Call time • 29
Caller ID • 32
Calls
answering • 22
barring • 31
diverting • 30
holding • 23
redialling • 21
rejecting • 22
waiting • 32
CB (Cell Broadcast) messages •
39
Characters, enter • 18
Conference call • 24
Connection tone • 35
Deleting
call records • 29
MMS • 40, 41
phonebook • 27
SMS • 36
Delivery reports, message • 43
Dialled calls • 29
Display
layout • 10
settings • 56
Diverting, calls • 30
DTMF tones, send • 23
Emergency calls • 66
Extra tones 35
FDN (Fixed Dial Number) mode
• 59
Funbox • 45
Games • 47
Greeting message • 57
Holding, call • 23
Icons, description • 10
Images, downloaded • 48
Inbox, messages
MMS • 40
SMS • 36
International calls • 21
Internet • 45
IrDA • 56
Key tones
sending • 23
setting • 34
Keys, description • 9
Language, select • 57
Last number, redial • 21
Listening, radio • 55
Locking
keypad • 56
phone • 58
SIM card • 58
Low battery indicator • 8
MMS messages
creating/sending • 41
deleting • 41
setting • 43
viewing • 40, 41
Multi-party calls • 24
Muting
key tones • 23
microphone • 23
Memory status
downloaded items • 49
messages • 39, 43
phonebook • 28
Message tone • 34
Messages
cell broadcast • 39
greeting • 57
MMS • 40
SMS • 35
voice • 39
web • 44
Minute minder • 35
Missed calls • 29
Names
entering • 18
searching • 25
Network selection • 32
Network services • 30
Number
dialling/searching • 21
storing • 26
Organiser • 49
Outbox, messages
MMS • 41
SMS • 36
Own number • 57
Password
call barring • 31
phone • 58
Phone
care and maintenance •
67
display • 10
icons • 10
locking • 58
resetting • 59
switching on/off • 8
unpacking • 6
Phonebook
copying • 26
deleting • 27
editing • 26
options • 26
speed-dialling • 27
PIN
changing • 58
locking • 58
PIN2, change • 59
Power on/off tone • 35
Privacy • 58
Radio • 54
Received calls • 29
Recording
voice memos • 53
Redialling
automatically • 59
manually • 21
Resetting phone • 59
Ring
tone • 34
volume • 34
Road safety • 64
Index
Safety
information • 62
precautions • 3
SDN (Service Dialling Numbers) • 28
Security, calls • 57
Sent messages
MMS • 40, 41
SMS • 36
69
Index
SIM card
inserting • 7
locking • 58
SMS messages
viewing • 36
Sound settings • 34
Sounds, downloaded • 48
Speed-dial • 27
Switching on/off
microphone • 23
phone • 8
Templates
MMS • 41
SMS • 37
Text input mode, change • 18
Text, enter • 18
Tone
call ringer • 34
connect • 35
extra • 35
keypad • 34
message • 34
power on/off • 35
70
Voice mail • 39
Voice memos
recording • 53
Voicemail server • 39
Waiting call • 32
WAP browser
access • 45
cache, clear • 47
World time • 49
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.4
Linearized : No
Modify Date : 2005:04:06 15:40:45-03:00
Create Date : 2005:04:06 15:33:13-03:00
Title : C:\Documents and Settings\Admin
Author : Administrator
Creator : 훈민 워드 i - [C:\Documents and Settings\Administrator\바탕 화면\1.gul]
Producer : Acrobat PDFWriter 5.0 Windows NT¿ë
Page Count : 84
Mod Date : 2005:04:06 15:40:45-03:00
Creation Date : 2005:04:06 15:33:13-03:00
Metadata Date : 2005:04:06 15:40:45-03:00
Has XFA : No
EXIF Metadata provided by EXIF.tools
