Samsung Electronics Co SGHE350 Single-Band PCS GSM Phone User Manual C s and Settings Admi

Samsung Electronics Co Ltd Single-Band PCS GSM Phone C s and Settings Admi

Users Manual

Download: Samsung Electronics Co SGHE350 Single-Band PCS GSM Phone User Manual C  s and Settings Admi
Mirror Download [FCC.gov]Samsung Electronics Co SGHE350 Single-Band PCS GSM Phone User Manual C  s and Settings Admi
Document ID555280
Application IDWtxsXIiVIrpuYVLtN5ixIw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize81.65kB (1020584 bits)
Date Submitted2005-06-23 00:00:00
Date Available2005-08-07 00:00:00
Creation Date2005-06-13 10:58:07
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2005-06-13 11:02:36
Document TitleC:\Documents and Settings\Admi...
Document CreatorPScript5.dll Version 5.2
Document Author: B1E8BCB1BFC0

9. User manual
* Depending on the software installed or your service provider, some of the descriptions in this
manual may not match from your phone.
* Depending on your country, your phone and accessories may appear different from the
illustrations in this manual.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-XXXXXA
English. 04/2005. Rev 1.0
Draft
2005. 04. 26
E350XAED3
SGH-E350
User’s Guide
Use road safety at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Keep your phone away from small children
All wireless phones may be subject to interference,
which could affect their performance.
Keep the phone and all its parts, including accessories,
out of the reach of small children.
Be aware of special regulations
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories could
damage your phone and may be dangerous.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Emergency calls
Key in the emergency number for your present
location, then press
Important safety precautions
Interference
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see "Health and
safety information" on page 87.
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful
attention to the subsequent information
regarding safety or phone features.
Indicates that you can get more information
on the referenced page.
Indicates that you need to press the
Navigation keys to scroll to the specified
option and then select it.
→
< >
Indicates a key on the phone. For example,
[ ]
Indicates a soft key, whose function is
displayed on the phone screen. For example,

•
Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
Special features of your phone
•
MP3 player
Play MP3 music files on your
phone.
•
IrDA
Send and receive Phonebook and
File manager data via an infrared
port.
•
•
Name card
Create name cards with your
number and profile. Whenever
introducing yourself to others, use
this convenient electronic name
card.
WAP browser
Access the wireless web and access
various services and current
information.
•
Multimedia message service (MMS)
Send and receive MMS messages with a
combination of text, images, video, and audio.
•
E-mail
Send and receive e-mails with images, video, and
audio attachments.
•
Java
Enjoy Java™-based embedded
games and download new games.
•
Calendar
Keep track of your daily, weekly,
and monthly schedule.
•
Voice recorder
Record memos or sounds.
Special features of your phone
•
Get personal with photo caller
ID
See who’s calling you when the
phone displays their very own
photo displays.
Contents
Unpack
Make sure you have each item
Your phone
Buttons, features, and locations
Get started
First steps to operating your phone
Install and charge the phone ................................... 7
Power on or off ...................................................... 8
Keys and display .................................................... 9
Access menu functions.......................................... 11
Customise your phone .......................................... 12
Make/Answer calls................................................ 14
Step outside the phone
14
Begin with your camera, music, and other special features
Use camera ......................................................... 14
Play MP3s ........................................................... 15
Play games..........................................................
Browse the web ...................................................
Use Phonebook ....................................................
Send messages....................................................
View messages ....................................................
16
16
17
18
19
Enter text
21
ABC, T9, Number, and Symbol mode
Call functions
24
Advanced calling features
Menu functions
29
All menu options listed
Solve problems
84
Help and personal needs
Health and safety information
Index
87
113
Overview of menu functions
To access Menu mode, press  in Idle mode.
1 Call records
Current contacts
Missed calls
Dialled calls
Received calls
Delete all
Call time
Call costs*
2 Phonebook
Contact list
FDN list
Add new contact
Group
Speed dial
My name card
Own number
Management
Service number*
p.29
p.29
p.29
p.29
p.30
p.30
p.30
p.30
p.31
p.31
p.32
p.32
p.33
p.33
p.34
p.34
p.34
p.35
3 Applications
MP3 Player
Voice recorder
Java world
World time
Alarm
Calculator
Converter
Timer
Stopwatch
SIM-AT*
4 Browser
Home
Bookmarks
Go to URL
Clear cache
Profile settings
Current profile
p.35
p.36
p.37
p.39
p.40
p.41
p.42
p.42
p.42
p.43
p.43
p.43
p.43
p.44
p.45
p.45
p.45
p.46
5 Messages
Create new message
My messages
Templates
Delete all
Settings
Broadcast messages
Memory status
6 File manager
Images
Videos
Music
Sounds
Other files
Memory status
7 Calendar
p.47
p.47
p.49
p.55
p.56
p.56
p.61
p.61
p.62
p.62
p.62
p.63
p.64
p.64
p.65
p.65
8 Camera
p.69
9 Settings
p.75
p.75
p.75
p.77
p.78
p.79
p.81
p.82
p.84
p.84
Time & Date
Phone settings
Display settings
Sound settings
Network services
Connectivity
Security
Memory status
Reset settings
*Shows only if supported by your
SIM card.
Unpack
Your phone
Make sure you have each item
Buttons, features, and locations
Earpiece
Phone
Battery
Travel Adapter
User’s Manual
You can obtain various accessories from
your local Samsung dealer.
The items supplied with your phone
and the accessories at your Samsung
dealer may vary, depending on your
country or service provider.
Display
Soft key (left)
Volume keys
Dial key
Alphanumeric
keys
IrDA port
Special
function keys
Mirror
Navigation keys
(Up/Down/Left/
Right)
Camera
Soft key (right)
WAP access/
Confirm key
Power on/off/
Menu exit key
Headset
jack
Correct key
Microphone
Flash
Camera
key
Get started
Install the battery.
Plug the adapter into a standard AC wall outlet.
When the phone is completely charged, unplug the
Adapter from the power outlet.
First steps to operating your phone
Plug the travel adapter
into the phone.
SIM card information
When you subscribe to a cellular network, you receive
a plug-in SIM (Subscriber Identity Module) card
loaded with your subscription details, such as your
PIN, and available optional services.
Install and charge the phone
Remove the battery.
If the phone is already
on, first turn it off by
holding [ ].
Insert the SIM card.
Make sure that the goldcoloured contacts on the
card face down into the
phone.
Get started
Remove the adapter from the phone.
Power on or off
Switch on
Do not turn on
the phone when
mobile phone
use is prohibited.
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the battery low message displays, and
• the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
Switch off
1. Open the phone.
2. Press and hold [
the phone.
] to turn on
3. If necessary, enter the PIN and
press .
1. Open the phone.
2. Press and hold [
].
Keypad lock
When you close the phone, the keypad lock feature
locks the exposed keys so that nothing will happen if
the keys are accidentally pressed.
To unlock the keypad, press the left soft key and press
.
Keys and display
Perform the function indicated on the
bottom line of the display.
In Idle mode, access menu options
directly.p. 76
In Menu mode, scroll through the menu
options.
Get started
End a call.
Hold down to switch the phone on and
off.
In Menu mode, cancel input and return
the phone to Idle mode.
Enter numbers, letters, and some
special characters.
In Idle mode, hold [1] down to access
your voicemail server. Hold [0] down to
make an international call.
In Idle mode, launch the Wireless
Application Protocol (WAP) browser.
In Menu mode, select the highlighted
menu option.
Enter special characters.
In Idle mode, hold [ ] down to activate
or deactivate Quiet mode. Hold [ ]
down to enter a pause.
Delete characters from the display.
Send or answer a call.
In Idle mode, retrieve the recent
numbers dialled, missed, or received.
(on the left)
Adjust the phone volume.
In Idle mode, with the phone open,
adjust the keypad tone volume. With
the phone closed, press to turn on the
backlight.
Get started
(on the right)
In Idle mode, hold down to turn on the
camera.
In Camera mode, take a photo or start
recording a video.
Display
New message
New multimedia message
New e-mail message
New voicemail
Call diverting feature is active
Layout
Icons
display various icons.
Text and graphics
display messages,
instructions, and
information you enter.
Menu
Contacts
Soft key function
indicators
show the current functions
assigned to the two soft.
Icons
Received signal strength
Call in progress
Out of your service area; you
cannot send or receive calls
10
Alarm set
IrDA port is active
Connected to hands-free or
headset
Roaming network
Home Zone, if you have
registered for the appropriate
service
Quiet mode is active
Call ringer set to vibratep. 78
Battery power level
Access menu functions
Use the soft
keys
Menu
Press the left soft
key to access
Menu mode.
Select an
option
1. Press the appropriate soft key.
2. Press the Navigation keys to
move to the next or previous
option.
Get started
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current role.
3. Press  when Check
new mail is highlighted to
retrieve an e-mail or a header.
4. Select an e-mail or a header.
5. If you selected a header, press
 and select
Retrieve.
Using ABC mode
Enter text
ABC, T9, Number, and Symbol mode
You can enter text for some features such as
messaging, Phonebook, or Calendar, using ABC mode,
T9 mode, Number mode, and Symbol mode.
Press the appropriate key until the character you want
appears on the screen.
Changing the text input mode
The text input mode indicator appears when the cursor
is in a text field.
Press the right soft key to change the text input mode.
Example: Writing a text message
ABC mode
T9 mode
Number mode
Symbol mode
Text input mode
indicator
21
Enter text
Tips for using ABC mode
• To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
• Press [ ] to insert a space.
• Press [ ] to shift case. Lower Case (No indicator),
Initial capital ( ), and Capital lock ( ) are
available.
• Press [Left] or [Right] to move the cursor.
• Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Using T9 mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
Entering a word in T9 mode
1. Press [2] to [9] to start entering a word. Press
each key once for each letter.
For example, press [4], [3], [5], [5], and [6] to
enter HELLO in T9 mode.
22
T9 predicts the word that you are typing, and it
may change with each key that you press.
2. Enter the whole word before editing or deleting
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [0] to display alternative word
choices for the keys that you have pressed.
For example, OF and ME use [6] and [3].
4. Press [ ] to insert a space and enter the next
word.
Tips for using T9 mode
• Press [1] to enter periods or apostrophes
automatically.
• Press [ ] to shift case in T9 mode. Lower Case (No
indicator), Initial capital ( ), and Capital lock ( )
are available.
• Press [ ] to insert a space.
• Press [Left] or [Right] to move the cursor.
• Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Adding a new word to the T9 dictionary
This feature may not be available for some languages.
1. Enter the word that you want to add.
2. Press [0] to display alternative words for your key
presses. When there are no more alternative
words, Spell appears on the bottom line.
3. Press .
4. Enter the word you want using ABC mode and
press .
Using Number mode
Using Symbol mode
Symbol mode enables you to insert symbols.
To
Press
display more symbols
[Up] or [Down].
select a symbol
the corresponding
number key.
clear the entered symbol(s)
[C].
insert the symbol(s)
.
Number mode enables you to enter numbers.
Press the keys corresponding to the digits you want.
23
Call functions
Call functions
Advanced calling features
Making a call
1. In Idle mode, enter the area code and phone
number.
2. Press [ ].
• Press [C] to clear the last digit or press and hold
[C] to clear the whole display. You can move the
cursor to edit an incorrect digit.
• Press and hold [ ] to enter a pause between
numbers.
Making an international call
1. In Idle mode, press and hold [0]. The + character
appears.
2. Enter the country code, area code, and phone
number, then press [ ].
Redialling recent numbers
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press [ ].
Making a call from Phonebook
Once you have stored a number in Phonebook, you
can dial the number by selecting it from
Phonebook.p. 31
You can also use the speed dial feature to assign your
most frequently called numbers to specific number
keys. p. 33
Dialling a number from the SIM card
1. In Idle mode, enter the location number for the
phone number you want and press [ ].
2. Find the number your want.
3. Press  or [ ] to dial the number you want.
Ending a call
Close the phone or press [
24
].
Using the headset
When you receive an incoming call, the phone rings
and displays the incoming call image.
Use the headset to make or answer calls without
holding the phone.
Press  or [
Connect the headset to the jack on the right side of
the phone.
] to answer the call.
Tips for answering a call
• When Anykey answer in the Extra settings
menu is active, you can press any key, except for
 or [ ].p. 76
• Press  or [ ] to reject a call.
• Press and hold [ / ] to mute the ringer.
Viewing missed calls
If you have missed calls, the screen displays how
many calls you have missed.
1. Press .
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
Call functions
Answering a call
The buttons on the headset work as listed below:
To
redial the last call
Press
and hold the button twice.
answer a call
the button.
end a call
the button.
Options during a call
You can access a number of functions during a call.
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume during a call.
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
25
Call functions
Placing a call on hold/Retrieving
4. To end the current call, press [
Press  or  to place a call on hold
or retrieve the call.
Transferring a call
Making a second call
You can make another call if your network supports it.
1. Press  to put the call on hold.
2. Make the second call in the normal way.
3. Press  to switch between the calls.
4. Press  and select End held call to end
the call on hold.
5. To end the current call, press [ ].
Answering a second call
You can answer an incoming call while already on the
phone, if your network supports it and you have
activated the call waiting feature.p. 80
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press  to switch between the calls.
3. Press  and select End held call to end
the call on hold.
26
].
You can transfer the currently active call to a caller on
hold, if your network supports it. With this option, the
two callers can talk to each other, but you are
disconnected from the call.
Press  and select Transfer.
Using the menu options
You can access Menu mode and use menu functions.
During a call, some munu functions are not
available.
Press  and select Menu.
Switching off the microphone (Mute mode)
You can temporarily switch off your phone’s
microphone so that the person on the phone cannot
hear you.
Press  and select Mute or Unmute.
Using the voice clarity feature
Press  and select Voice clarity on or
Voice clarity off.
Muting or sending key tones
You can turn the key tones off or on.
Press  and select Mute keys or Send
keys.
To communicate with answering machines or
computerised telephone systems, Send keys must
be selected.
Sending a sequence of DTMF tones
Dual tone multi-frequency (DTMF) tones are the tones
used in phones for tone dialling.
You can send DTMF tones as a group after entering the
entire number you need to send or retrieving a
number from Phonebook. This feature is helpful for
entering a password or an account number when you
call an automated system, like a banking service.
1. When connected with a teleservice system, press
 and select Send DTMF.
2. Enter the number you need to send and press
.
Call functions
This feature removes extraneous noise and increases
call quality so that the person with whom you are
speaking can hear you clearly even if you are in a
noisy place.
Using Phonebook
You can access the Phonebook menu to locate or
store entries.p. 31
Press  and select Phonebook.
Using the message service
You can access the Messages menu to read an
incoming message and send a new message.
Press  and select Message.
27
Using SIM services
The SIM service menu is available if you use a SIM
card in your phone. A SIM card provides services such
as news, weather, sports, entertainment, and location
services.
For details, see your SIM card instructions or contact
your service provider.
Making a multi-party call
Use this feature to allow as many as six people to join
a multi-party call, or conference call.
Your service provider must support multi-party calls
for you to use this feature.
Setting up a multi-party call
1. Call the first participant.
2. Call the second participant. The first call is
automatically put on hold.
3. Press  and select Join. The first
participant is added to the multi-party call.
28
4. If desired, call another person or answer an
incoming call.
5. Press  and select Join.
6. Repeat steps 4 and 5 as desired.
Having a private conversation with one
participant
1. Press  and select Private.
2. Select a name or number from the participant list.
You can talk privately with that person, while the
other participants converse with each other.
3. To return to the multi-party call, press 
and select Join.
Dropping one participant
1. Press  and select Remove.
2. Select a name or number from the participant list.
The participant is dropped from the call, but the
call continues with the other parties.
3. Close the phone or press [ ] to end the multiparty call.
Missed calls (Menu 1.2)
This menu displays the most recent calls dialled,
received, or missed.
This menu displays the most recent calls that you did
not answer.
Call records (Menu 1)
Use this menu to view the calls you have dialled,
received, or missed, the length of your calls, and the
cost of your calls.
Accessing a call record
1. Press [Left] or [Right] to select a call type.
2. Press [Up] or [Down] to scroll through the call list.
3. Press [ ] to view the details of a call, or [ ] to
dial a number.
Call records (Menu 1)
Current contacts (Menu 1.1)
All menu options listed
Menu functions
To access this menu, press  in Idle mode and
select Call records.
Using call record options
While viewing the call list, press  to access
the following options:
• Details: display the details of the selected call.
• Call: dial the number.
• Save as contacts: save the number in
Phonebook.
• Send message: send an SMS or MMS message.
• Delete: delete the selected call record or all call
records.
Menu functions
Dialled calls (Menu 1.3)
This menu displays the most recent calls you have
dialled.
29
Menu functions
Received calls (Menu 1.4)
This menu displays the most recent calls you have
received.
Delete all (Menu 1.5)
Use this menu to delete all of the records in each call
type.
1. Press [ ] to check the call type(s) to be cleared.
2. Press .
3. Press  to confirm the deletion.
Call time (Menu 1.6)
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
• Last call time: check the length of your last call.
• Total sent: check the total length of all the calls
you have dialled.
• Total received: check the total length of all the
calls you have received.
30
•
Reset timers: reset the call timers. You need to
enter the phone password.
The password is preset to 00000000. You can
change this password. p. 83
Call costs (Menu 1.7)
This network feature displays the cost of calls. This
menu is available only if your SIM card supports this
feature. Note that this is not intended to be used for
billing purposes.
• Last call cost: check the cost of your last call.
• Total cost: check the total cost of all of your calls.
If the total cost exceeds the maximum cost set in
Set max cost, you must reset the counter before
you can make another call.
• Max cost: check the maximum cost limit set in
Set max cost.
• Reset counters: reset the cost counters.
• Set max cost: set the maximum cost authorised
for your calls.
• Price/Unit: set the price per unit that is applied
when the cost of your calls is calculated.
Phonebook
(Menu 2)
To access this menu, press  in Idle mode and
select Phonebook.
Contact list (Menu 2.1)
Press  in Idle mode to quickly access
this menu.
Finding an entry
1. Enter the first few letters of the name that you
want to find.
2. Select the name you want from the list.
3. Press [ ] to dial the number, or  to
access Phonebook options.
Phonebook (Menu 2)
Use this menu to search for numbers in Phonebook.
Menu functions
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Phonebook.
Using Phonebook options
While viewing the contact list or contact details, press
 to access the following options:
• View: display details about the contact.
• Edit: edit the contact information.
• Send message: send an SMS or MMS message.
• Copy: copy the contact to the phone’s memory or
the SIM card.
• Add new contact: add a new contact to the
phone’s memory or the SIM card.
• Send via: send the contact via SMS, MMS, e-mail,
or infrared port.
• Delete: delete the selected contact or all contacts.
• Language select: select a language to be used in
the text input mode.
31
Menu functions
FDN list (Menu 2.2)
Add new contact (Menu 2.3)
Use this menu to create a list of contacts to be used in
FDN (Fixed Dialling Number) mode, in which the
phone allows outgoing calls only to the specified
phone numbers, if your SIM card supports this
feature. You can activate FDN mode in the FDN mode
menu.p. 83
Use this menu to add a new contact to Phonebook.
Adding a contact
1. Press  and select Add.
2. Enter your PIN2 and press .
3. Enter a name and phone number, or press
 and select Contact list to retrieve a
contact from Phonebook.
4. If necessary, change the location number.
5. Press  to save the contact.
Using contact options
Scroll to a contact and press  to access
options.p. 31
32
Storing a number in the phone’s memory
1. Select Phone.
2. Change the settings or enter information about the
contact.
• Last name/First name: assign a name.
• Mobile/Home/Office/Fax/Other: add a
number in any category.
• Email: assign an e-mail address.
• Caller ID: assign an image as a caller ID
image to alert you to a call from the number.
• Ringtone: assign a ringer melody to alert you
to a call from the contact.
• Group: assign the contact to a caller group.
• Notes: add a memo about the person.
3. Press  to save the contact.
Storing a number on the SIM card
1. Select SIM.
2. Enter a name and press [Down].
Group (Menu 2.4)
Use this menu to organise your contacts in caller
groups.
Managing caller groups
While viewing the group list, press  to
access the following options:
• View: display the members of the selected group.
•
Add: add a new group.
Edit: change the properties of the selected group.
Send message: send SMS, MMS, or e-mail
messages to the group members.
Delete: delete the selected group. Group
members, however, are not deleted from
Phonebook.
Speed dial (Menu 2.5)
Use this menu to assign a speed dial number (2 to 9)
for eight of your most frequently called numbers.
Phonebook (Menu 2)
Adding members to a caller group
1. Select a group.
2. Press . The list of contacts stored in your
phone’s memory is displayed.
3. Scroll to a contact and press .
33
Menu functions
Managing speed dial entries
From the Speed dial screen, press  to
access the following options:
• Add: assign a number to an unassigned key.
• View: view the number assigned to the key.
• Change: assign a different number to the
assigned key.
• Remove: clear the speed dial settings for the
selected key.
Using name card options
After saving your name card, press  to
access the following options:
• Edit: edit the name card.
• Send via: send the name card via SMS, MMS, email, or infrared port.
• Remove: delete the name card.
Dialling speed dial entries
Press and hold the appropriate key in Idle mode.
Use this feature to check your phone numbers, or to
assign a name to each of the numbers. Changes made
here do not affect the actual subscriber numbers on
your SIM card.
My name card (Menu 2.6)
Use this menu to create a name card and send it to
other people.
Saving your name card
The procedure for creating your name card is the
same as the one for saving a phone number in the
phone’s memory.p. 32
34
Own number (Menu 2.7)
Management (Menu 2.8)
Use this menu to manage Phonebook.
• Default saving: select a default memory location
to save contacts.
If you select Ask on saving, the phone will ask
you to select a memory location when saving a
number.
•
•
•
Memory status: display the number of contacts
you have stored in Phonebook.
This menu is available if your SIM card supports
Service Dialling Numbers (SDN). Use this menu to
view the list of SDNs assigned by your service
provider, including emergency numbers, directory
enquiries, and voicemail numbers.
1. Scroll to the number you want.
2. Press  or [ ].
Applications
Applications (Menu 3)
The password is preset to 00000000. You
can change this password.p. 83
Service number (Menu 2.9)
Menu functions
•
Copy all to phone: copy all of the contacts stored
on the SIM card to the phone’s memory.
Sort by contacts: change the sort order of
Phonebook.
Delete all: delete all of the contacts from your
phone’s memory, your SIM card, your FDN list, or
all at once.
1.Press [ ] to check the location(s) to be cleared.
2.Press .
3.Press  again to confirm the deletion.
4.Enter the phone password and press .
(Menu 3)
Use this menu to play Java games, to play music files,
to record a voice memo, to set time zones and alarms,
or to use the phone as a calculator, timer, or
stopwatch.
To access this menu, press  in Idle mode and
select Applications.
35
Menu functions
MP3 Player (Menu 3.1)
Use this menu to enjoy music. First, you need to save
MP3 files in your phone’s memory.
Downloading or receiving music files
Use these methods to save MP3 files to your phone’s
memory:
• Download from the wireless webp. 43
• Download from a computer using the EasyStudio II
programEasyStudio II User’s Guide
• Via an active infrared portp. 81
36
3. If you selected Add a file, scroll to a file and press
. Repeat from step 2.
4. Press  to go back to the MP3 player
screen.
Playing music files
From the MP3 player screen, press [ ].
During playback, use the following keys:
Keys
Function
Pauses or resumes playback.
The downloaded or received files are stored in the
Music folder.p. 63
Left
Goes back to the previous file.
Right
Skips to the next file.
Creating a play list
Add MP3 files to the play list.
1. From the MP3 player screen, press 
and select Add to list.
2. Select either of the following options:
• Add all: add all of the files in the phone’s
memory to the play list.
• Add a file: add specific files to the play list.
Up
Opens the play list.
Changes the repeat mode.
Switches to shuffle mode.
Down
Adjusts the volume level.
Stops playback.
Accessing the play list
From the MP3 player screen, press [Up] to access the
play list.
Press  to access the following options:
• Play: play the currently selected file.
• Add to list: add files to the play list.
• Move list: move the selected file to the position
you want within the play list.
• Remove: remove the selected file from the play
list.
• Remove all: remove all files from the play list.
Menu functions
Applications (Menu 3)
Using MP3 file options
From the MP3 player screen, press  to
access the following options:
• Pause/Play: pause or resume playback.
• Send via: send the currently selected file via email or infrared port.
• Open play list: display the play list.
• Set as: set the file as your alarm sound, ringtone,
or a caller alert melody for a Phonebook entry.
• Delete: delete the selected file.
• Settings: change the default settings for playing
music files.
Repeat mode: select a repeat mode.
Shuffle: set the MP3 player to play music in
random order.
Visualization: select a visualization type
Skin: select a skin type.
Volume: select a volume level.
• Properties: access the properties of the file.
Voice recorder (Menu 3.2)
Use this menu to record voice memos. A voice memo
can be up to one hour long.
Recording a voice memo
1. Press [ ] to start recording.
2. Speak into the microphone.
Press [ ] to pause or resume the recording.
37
Menu functions
3. When you finish, press . The voice memo
is saved automatically.
After recording a voice memo, press  to
access the following options:
• Play: play back your voice memo.
• Send via: send the voice memo via MMS, e-mail,
or infrared port.
• Set as: set the file as your alarm sound, ringtone,
or a caller alert melody for a Phonebook entry.
• Delete: delete the voice memo.
• Rename: change the name of the voice memo.
• Move to favorite: move the voice memo to the
favourite sounds folder.
• Protection: protect the voice memo from being
deleted.
• Properties: access the properties of the voice
memo.
38
Playing a voice memo
1. From the Voice recorder screen, press 
and select Go to voice list.
2. Select a voice memo. The memo plays.
On the player screen, you can use the following keys:
Keys
Function
Pauses or resumes playback.
Up
Goes back to the Voice record screen.
Down
Stops playback.
Adjusts the volume.
Using voice recorder options
From the Voice record screen, press  to
access the following options:
• Record: record a new voice memo.
• Settings: change the default settings for
recording a voice memo.
Recording time: select a maximum recording
time.
Volume: select a volume level.
Default name: change the default prefix of the
voice memo.
Equalizer value: select an equalizer image.
•
Go to voice list: go to the voice memo list.
Java world (Menu 3.3)
Applications (Menu 3)
Using Java game options
From the Java world screen, select Downloads and
press  to access the following options:
• Launch: launch the selected game.
• Application settings: set a game to be continued
when a call comes in or an alarm sounds during
the game. You can also set the phone to exchange
game information with the network while playing
an online game or when you need to connect to
the Internet.
• Delete: delete the game.
• Properties: view the game properties.
Menu functions
Use this menu to access and play Java games and to
change the network settings for accessing Java
services.
Playing Forgotten Warrior
1. From the Java world menu, select Downloads →
Forgotten Warrior.
2. Press any key.
3. Press .
4. Select START GAME or CONTINUE.
5. Press  to start a game.
During a game, press  to access game
options.
Playing Freekick
1. From the Java world menu, select Downloads →
Freekick.
2. Press any key.
3. Select Game → the game mode you want → a
team → a player.
During a game, press [ ] to access game menus.
39
Menu functions
Playing Arch Angel
1. From the Java world menu, select Downloads →
Arch Angel.
2. Press any key.
3. Select NEW GAME or LOAD GAME → a game
mode.
4. Press  continuously or , and then
.
5. Press  until the game starts, or  to
start the game immediately.
During a game, press  to access game
options.
Changing Java settings
You can change the settings for accessing Java
services.
1. From the Java world menu, select Settings.
2. Change the following settings:
• APN: enter the access point name.
• Login ID: enter the user ID.
• Password: enter the password.
40
•
•
Proxy: select whether or not you use a proxy
server to access network services. Depending
on this setting, options in Proxy settings vary.
Proxy settings: provide you with the following
options:
When the proxy is set to Enable:
IP address: enter the HTTP proxy address.
Port: enter the port number.
When the proxy is set to Disable:
DNS1: Enter the primary DNS address.
DNS2: Enter the secondary DNS address.
Checking memory status
You can view the amount of total and used memory for
Java games.
From the Java world menu, select Memory status.
World time (Menu 3.4)
Use this menu to set your local time zone and find out
what time it is in another part of the world.
Applying Daylight Savings Time
1. From the world map, press  and select
Set daylight saving time.
2. Press [ ] to check the time zone(s) you want.
3. Press .
Use this menu to set alarms to sound at specific times.
Setting an alarm
1. Select the type of alarm.
2. Select On on the Alarm line and press [Down].
3. Enter the time for the alarm to sound and press
[Down].
4. If necessary, select AM or PM in 12-hour time
format and press [Down].
You can change the time format.p. 75
Applications (Menu 3)
Viewing and setting a foreign time zone
1. From the world map, press [Down].
2. Press [Left] or [Right] to select the foreign time
zone you want to view.
3. Press  and select Save to save the
time zone.
Alarm (Menu 3.5)
Menu functions
Setting your local time zone
1. From the world map, press [Left] or [Right] to
select the city that corresponds to your home time
zone. As the time line moves, the time and date of
the given zone display.
2. Press  and select Save to save the
time zone.
5. Select the day(s) on which you want to the alarm
to ring.
6. Select the Alarm tone line.
7. Select an alarm melody.
8. Press  and then .
Stopping an alarm
When the alarm sounds, choose either of the following
options to stop the alarm.
• Press .
41
Menu functions
•
Press  or any key to stop the wake-up
alarm for 5 minutes. You can do this a maximum of
five times.
Setting the alarm to ring even if the phone is
off
From the Alarm screen, select Auto power → On.
If the phone is off when it is time for the alarm to ring,
the phone is switched on and sounds the alarm.
Calculator (Menu 3.6)
Use this menu to perform basic arithmetic functions,
such as addition, subtraction, multiplication, and
division.
1. Enter the first number.
• Press the left soft key to insert a decimal point
or bracket.
• Press [ ] or [ ] to move the cursor.
2. Press one of the Navigation keys to access the
math function you want.
3. Enter the second number.
4. Press [ ] to view the result.
42
Converter (Menu 3.7)
Use this menu for common conversions, such as
currency and temperature.
1. Select a converter.
2. Press [Left] or [Right] to select the original unit
and press [Down].
3. Enter the value to be converted and press [Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to above
zero (+) or below zero (-)
4. Press [Left] or [Right] to select the unit you want
to convert to.
The equivalent value for the amount you entered
displays.
Timer (Menu 3.8)
Use this menu to set a period of time for the phone to
count down. The phone will sound an alarm when the
specified period of time has expired.
Stopping the timer
• Press any key when the timer rings.
• Press [ ] on the Timer screen to stop the timer
before it rings.
Use this menu to measure elapsed time. The precision
of the stopwatch is one one-hundredth of a second.
1. Press [ ] to start the stopwatch.
2. Press [ ] to check an interval. You can repeat this
step for a total of 4 intervals.
3. To reset the stopwatch, press .
This menu is available if you use a SIM AT card that
provides additional services, such as news, weather,
sports, entertainment, and location services. Available
services may vary, depending on your service
provider’s plans. For details, see your SIM card
instructions or contact your service provider.
Browser
(Menu 4)
Browser (Menu 4)
Stopwatch (Menu 3.9)
SIM AT (Menu 3.10)
Menu functions
Starting the timer
1. Press .
2. Enter the length of time you want to count down
and press .
3. Press [ ] to start counting down.
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
Using the WAP browser, you can access up-to-date
information and a wide variety of media content, such
as wallpapers, ringtones, and music files.
To access this menu, press  in Idle mode and
select Browser.
Home (Menu 4.1)
Use this menu to connect your phone to the network
and load the homepage of the wireless web service
provider. You can also press [ ] in Idle mode.
43
Menu functions
Navigating with the WAP browser
To
Press
scroll through browser items
the Navigation
keys.
select a browser item
>.
Using WAP page options
From any WAP page, press  and select Menu
to access the following options:
• Back: go back to the previous page.
• Home: go back to the homepage.
• Exit: exit the WAP browser.
• Reload: reload the current page.
• Show URL: display the URL address of the current
web page.
• About...: access version information for your WAP
browser.
44
Using menu options
While viewing the menu options, press [ ] to access
the following menu options:
• Go to URL: enter the URL address of a website
and access the website.
• Bookmarks: save URL addresses to quickly
access websites.
• Messages: send SMS messages or view the
messages stored in the phone.
• File manager: access images, videos, music files,
and sound files stored in the phone’s memory.
Exiting the WAP browser
Press [ ] to exit the browser.
Bookmarks (Menu 4.2)
Use this menu to save URL addresses in order to
quickly access websites.
Adding a bookmark
1. Select an empty location.
2. Enter a name for the bookmark and press [Down].
3. Enter a URL address and press  and
select Save.
Go to URL (Menu 4.3)
Use this menu to manually enter the URL address of a
website and access the website.
Clear cache (Menu 4.4)
Use this menu to clear the cache, a temporary
memory that stores recently accessed web pages.
For each server, the following options are available:
• Profile name: assign a name to the server profile.
• Home URL: set the address of your homepage.
• Bearer: select a bearer for each type of network
address accessed.
• Proxy: select whether or not the phone uses a
proxy server to launch the WAP browser. Your
service provider can tell you if your network
requires a proxy server, and they can give you the
appropriate settings.
• GPRS settings: customise the following GPRS
network settings:
When the proxy is set to Enable:
Proxy IP: enter the WAP gateway address.
Proxy port: enter the port number.
Browser (Menu 4)
Using bookmark options
After saving an item, press  to access the
following options:
• Go: access the bookmarked website.
• Edit: edit the address and name of the bookmark.
• Delete: delete the selected bookmark.
Use this menu to set up servers for the WAP browser.
Contact your service provider for details about your
settings options.
Menu functions
Accessing a bookmarked page
Scroll to a bookmark item and press [ ].
Profile settings (Menu 4.5)
45
Menu functions
•
46
APN: enter the access point name of the GPRS
network gateway.
Login ID: enter the user ID.
Password: enter the password.
When the proxy is set to Disable:
DNS 1: enter the primary address.
DNS 2: enter the secondary address.
APN: enter the access point name of the GPRS
network gateway.
Login ID: enter the user ID.
Password: enter the password.
GSM settings: customise the following GSM
network settings:
When the proxy is set to Enable:
Proxy IP: enter the WAP gateway address.
Proxy port: enter the port number.
Dial number: enter the PPP server phone number.
Login ID: enter the user ID.
Password: enter the password.
Data call type: select a data call type.
When the proxy is set to Disable:
DNS 1: enter the primary address.
DNS 2: enter the secondary address.
Dial number: enter the PPP server phone number.
Login ID: enter the user ID.
Password: enter the password.
Data call type: select a data call type.
Current profile (Menu 4.6)
Use this menu to activate one of the proxy servers you
have set up.
Messages (Menu 5)
To access this menu, press  in Idle mode and
select Messages.
Create new message (Menu 5.1)
Text message (Menu 5.1.1)
Short Message Service (SMS) allows you to send or
receive text messages that may include pictures,
animated images, and melodies.
The maximum number of characters allowed in a
text message varies by service provider. If your
message exceeds the maximum number of
characters, the phone will split the message.
Messages (Menu 5)
Use this menu to create and send SMS, MMS, or
e-mail messages.
Menu functions
Use the Messages menu to send and receive text
messages, multimedia messages, and e-mails. You
can also use WAP push message, and cell broadcast
message features.
2. Press  to access one of the following
options:
• Insert: retrieve a text template, contact, or
bookmark item.
• Add picture/animation/melody: add a
picture, animated image, or melody to the
message.
• Attach: add a name card or calendar memo.
• Save to: save the message in Draft or My
folder.
• Language select: select a language to be
used in the text input mode.
• Text style: change the text attributes.
3. When you have finished, press  and
select Save and send or Send only.
4. Enter a destination number.
To send the message to more than one recipient,
press [Down] and fill in additional destination
fields.
5. Press [ ] to send the message.
1. Enter your message.
47
Menu functions
Multimedia message (Menu 5.1.2)
Multimedia Message Service (MMS) delivers messages
containing a combination of text, image, video, and
audio, from phone to phone or from phone to e-mail.
1. Select the Subject line.
2. Enter the message subject and press [ ].
3. Select the Picture & Video or Sound line and add
an image, a video, or a sound file.
The maximum size allowed for an MMS message
can differ depending on the country. If you
cannot attach another file, add another page.
48
4. Select the Message line.
5. Enter the message text and press [ ].
6. Press  to access the following options:
• Edit: edit the subject or text of your message.
• Preview: check the message you created.
• Save to: save the message to Draft, My
folder, or MMS Template.
• Add page: add pages. Move to each page by
pressing [Left] or [Right] on the message
screen.
•
•
Delete page: delete the current page.
Edit page: set the page duration or move the
current page to the next or previous page.
• Attach: add a name card or a calendar memo.
• Remove subject/picture/sound/message:
clear the subject, image, sound, or text.
7. When you have finished, press  and
select Send.
8. Enter a phone number or e-mail address.
To send the message to more than one recipient,
press [Down] and fill in additional destination
fields.
9. Press [ ].
Email (Menu 5.1.3)
You can send e-mails that include text, audio, and
images. To use this feature, you need to subscribe to
an e-mail service and set up your e-mail account and
profile.p. 59
1. Select the Subject line.
2. Enter the subject of your e-mail and press [ ].
3. Select the Message line.
Options may vary depending on the selected
field.
Edit: edit the subject or text.
View: play an added item.
Attach: add a calendar memo or a name card.
Save to: save the message in the Drafts or
My folder box.
• Remove subject/message: clear the subject
or text.
• Remove: delete the selected attachment.
• Remove all attachments: delete all
attachments.
8. When you have finished, press  and
select Send.
My messages (Menu 5.2)
Use this menu to store all of the messages you have
received, sent, or tried to send.
Inbox (Menu 5.2.1)
This folder stores all of the messages you have
received, except for e-mails.
Messages (Menu 5)
•
•
•
•
9. Enter an e-mail address.
To send the e-mail to more than one recipient,
press [Down] and fill in additional destination
fields.
10. Press [ ] to send the e-mail.
Menu functions
4. Enter the e-mail text and press [ ].
5. Select the File attach line.
6. Add media files. Depending on the file type or DRM
(Digital Rights Management) system, some files may
not be able to be forwarded.
7. When you have finished, press  to
access the following options:
Viewing a message at the time of its receipt
When a message has been received, the phone alerts
you by:
• Displaying a message icon with text notification
• Sounding a tone or vibrating, depending on the
message alert setting
To read a message immediately, press  and
select a message from the Inbox.
49
Menu functions
For an MMS notification, press  and select
Retrieve. The message is downloaded from the MMS
server to the phone’s memory.
Viewing a message in Inbox
The following icons may appear on the message list;
depending on the message type or status, icons may
vary:
•
SMS
•
MMS
•
MMS notification;
indicates that MMS has
been retrieving from the server and
indicates that MMS has been failed to
retrieve.
•
WAP push/configuration
•
CB messages
•
Delivery report
• According to the DRM (Digital Rights
Management) system, messages having web
content may not be able to be forwarded.
They are indicated by
• A icon next to a message means that a
message is of high priority. A grey-coloured
message icon is of low priority.
While viewing the message list, press  to
access the following options:
Options may vary depending on your country or
service provider.
•
•
•
•
•
•
50
View: open the message.
Retrieve: retrieve the MMS message from the
server.
Delete: delete the message.
Move to my folder: move the message to the My
folders folder.
Sort by: change the sort order of the messages.
Protection: protect the message from being
deleted.
Using message options
While viewing a message, press  to access
the following options:
•
•
Configuration messages
• Install: apply the configuration specified in the
message to your phone.
• Delete: delete the message.
• Properties: access the message properties.
Messages (Menu 5)
MMS messages
• Reply via SMS: send a reply message via SMS.
•
•
•
Reply via MMS to: send a reply message via
MMS.
Forward: forward the message to another person.
Delete: delete the message or all messages.
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
Cut media: save media content from the message
into your phone’s memory.
Properties: access the message properties.
Menu functions
SMS messages
• Reply via: reply to the sender via SMS or MMS
message.
• Forward: forward the message.
• Delete: delete the message.
• Move to phone/SIM: move the message
between the SIM card and the phone’s memory.
• Add to block list: add the number to the Block
list.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Cut media: save media content from the message
into your phone’s memory.
• Protection: protect the message from being
deleted.
•
WAP push messages
• Go to URL: connect to the URL specified in the
message.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
51
Menu functions
CB messages
• Save: saves the message to the phone’s memory.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
•
Delivery report messages
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
Outbox (Menu 5.2.3)
This folder stores messages that the phone is
attempting to send or has failed to send.
Draft (Menu 5.2.2)
This folder stores messages you have saved to send at
a later time.
While viewing the message list, press  to
access the following options:
• View: display the message.
• Edit: edit the message.
• Send: send the message.
• Delete: delete the message or all messages.
• Move to my folder: move the message to the My
folder box.
52
•
•
Move to phone/SIM: move the message
between the SIM card and the phone’s memory.
Sort by: change the sort order of the message list.
Protection: protect the message from being
deleted.
While viewing a message, press  to access
the following options:
• Send again: send the message again.
• Forward: forward the message to other people.
• Delete: delete the selected message.
• Move to phone/SIM: move the message
between the SIM card and the phone’s memory.
• Protection: protect the message from being
deleted.
From the message list, press  to access
the following options:
• View: open the message.
•
•
•
•
•
While viewing a message, press  to access
the following options:
• Forward: forward the message to other people.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
• Move to phone/SIM: move the message
between the SIM card and the phone’s memory.
•
Protection: protect the message from being
deleted.
Properties: access information about the
message.
From the message list, press  to access
the following options:
• View: open the message.
• Forward: forward the message to other people.
• Delete: delete the selected message.
• Move to my folder: move the message to the My
folder box.
• Sort by: change the sort order of the message list.
• Properties: access properties of the message.
• Protection: protect the message from being
deleted.
• Move to Phone/SIM: move the message
between the SIM card and the phone’s memory.
53
Messages (Menu 5)
Sentbox (Menu 5.2.4)
This folder stores messages that you have sent.
•
Menu functions
•
Send again: send the message again.
Delete: delete the message or all messages.
Move to my folder: move the message to My
folder box.
Move to phone/SIM: move the message
between the SIM card and the phone’s memory.
Sort by: change the sort order of the message list.
Protection: protect the message from being
deleted.
Menu functions
Email box (Menu 5.2.5)
This folder stores e-mails that you have received.
1. Select an e-mail account.
2. Press .
6. If you selected No reply, move to the Seconds
line and select the length of time the network
delays before diverting a call.
Menu functions
Extra tones (Menu 9.4.7)
Use this menu to customise additional tones for the
phone.
• Minute minder: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
• Connection tone: set the phone to beep when it
is connected to the system.
• Alerts on call: set the phone to beep when you
receive a new message or when the time for an
alarm comes during a call.
• Indicative tones: set the phone to beep when a
pop-up window displays.
79
Menu functions
Call barring (Menu 9.5.2)
This network service allows you to restrict your calls.
1. Select a call barring option:
• All outgoing: prohibit all outgoing calls.
• International: prohibit international calls.
• International except to home: only allow
calls to numbers within the current country
when you are abroad, and to your home
country.
• All incoming: prohibit incoming calls.
• Incoming while abroad: prohibit incoming
calls when you use your phone outside of your
home country.
• Cancel all: cancel all call barring settings,
allowing calls to be sent and received normally.
• Change barring password: change the call
barring password obtained from your service
provider.
2. Select the type of calls to be barred.
3. Select Activate. To deactivate call barring, select
Inactivate.
80
4. Enter the call barring password supplied by your
service provider and press .
To deactivate call waiting, select Inactivate.
Network selection (Menu 9.5.4)
This network service allows you to either automatically
or manually select the network to be used while
roaming outside of your home area.
You can select a network other than your home
network only if there is a valid roaming agreement
between the two.
• Automatic: connect to the first available network
when roaming.
• Manual: select the network you want.
Caller ID (Menu 9.5.5)
This network service allows you to prevent your phone
number from being displayed on the phone of the
person being called. However, some networks do not
allow the user to change this setting.
• Default: use the default setting provided by the
network.
• Hide number: ensure your number does not
display on the other person’s phone.
• Send number: send your number each time you
make a call.
•
Voice mail server (Menu 9.5.6)
Use this menu to store the number of the voicemail
server and access your voicemails.
You must enter the voice server number before you
can access your voicemails. Your service provider
can give the voice server number.
When you select a new band, your phone
automatically searches for all available networks. Your
phone registers with a preferred network within the
band.
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you may need to change to an
appropriate band.
Settings (Menu 9)
Connect to voice mail: connect to the voicemail
server to allow you to listen to your messages. You
can also connect to the voicemail server by
pressing and holding [1] in Idle mode.
Band selection (Menu 9.5.7)
For the phone to make and receive phone calls, it
must register with an available network. Your phone
can handle any of the following types of networks:
GSM 1900 and Combined GSM 900/1800.
Menu functions
•
Voice server number: enter the voicemail server
number.
Connectivity (Menu 9.6)
Use this menu to activate the infrared port.
You cannot use the infrared feature while using
multimedia features such as voice recorder,
camera, and MP3 player, or vice versa.
81
Menu functions
Infrared (Menu 9.6.1)
Use this feature to send and receive data through the
infrared port. To use an infrared connection, you must
do the following:
• Configure and activate an IrDA-compliant infrared
port on the other device.
• Activate the infrared feature on your phone (the
IrDA icon
displays on the top line).
• Align the IrDA port on the
phone with the IrDA port on
the other device.
If there is no communication
between your phone and the
other IrDA-compliant device
within 60 seconds of activating
the feature, it is automatically
deactivated.
82
Security (Menu 9.7)
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
If you enter an incorrect PIN/PIN2 three times in
succession, the SIM card is blocked. To unblock it,
you need to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are supplied by your
network operator.
PIN check (Menu 9.7.1)
The 4- to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
Change PIN (Menu 9.7.2)
Use this menu to change your PIN. The PIN check
feature must be enabled to use this feature.
Phone lock (Menu 9.7.3)
This feature locks the phone from unauthorised use.
The password is preset to 00000000. To change the
password, use the Change password menu.
Privacy (Menu 9.7.5)
Use this menu to lock your media contacts, including
MMS messages, e-mails, images, videos, music files,
and sounds.
1. Press [ ] to check the item(s) to lock.
2. Press .
3. Enter the phone password and press .
FDN mode (Menu 9.7.7)
If supported by your SIM card, Fixed Dialling Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored on
the SIM card. To use this feature, you must enter your
PIN2.
Settings (Menu 9)
Change password (Menu 9.7.4)
Use this menu to change your phone password. The
password is preset to 00000000.
Menu functions
When this feature is enabled, you must enter a 4- to
8-digit phone password each time the phone is
switched on.
SIM lock (Menu 9.7.6)
The SIM lock feature allows your phone to work only
with the current SIM by assigning a SIM lock code. You
must enter the SIM lock code to use a different SIM
card.
Change PIN2 (Menu 9.7.8)
If supported by your SIM card, the change PIN2
feature changes your current PIN2.
To access a locked item, you need to enter the phone
password.
83
Memory status (Menu 9.8)
Use this menu to check the amount of memory being
used for storing data in Shared memory, Messages,
File manager, Calendar, Phonebook, and JAVA
word. You can also check the shared memory for
MMS, Email, and File manager.
Reset settings (Menu 9.9)
Use this menu to reset the phone settings, display
settings, and sound settings individually. You can also
reset all the settings in your phone at the same time.
1. Press [ ] to check the setting category(ies) to be
reset.
2. Press  to reset the marked items.
3. Press  to confirm the reset.
4. Enter the phone password and press .
The password is preset to 00000000. You can
change this password p. 83
84
Solve problems
Help and personal needs
To save the time and expense of an unnecessary service
call, perform the simple checks in this section before
contacting a service professional.
When you switch on your phone, the following
messages may appear:
“Insert SIM card”
• Be sure that the SIM card is correctly installed.
“Phone lock”
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
“Enter PIN”
• You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu.
“Enter PUK”
• The PIN code has been entered incorrectly three
times in succession, and the phone is now blocked.
Enter the PUK supplied by your service provider.
You have entered a number but it was not
dialled
• Be sure that you have pressed [ ].
• Be sure you have accessed the right cellular
network.
• Be sure that you have not set an outgoing call
barring option.
Solve problems
“No Service,” “Network Failure,” or “Not
Done” displays
• The network connection has been lost. You may be
in a weak signal area. Move and try again.
• You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
Your correspondent cannot reach you
• Be sure that your phone is switched on. ([ ]
pressed for more than one second.)
• Be sure that you are accessing the correct cellular
network.
• Be sure that you have not set an incoming call
barring option.
Your correspondent cannot hear you speaking
• Be sure that you have switched on the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is located
at the bottom of the phone.
The phone starts beeping and “Low battery”
flashes on the display
•
Your battery is insufficiently charged. Recharge the
battery.
85
The audio quality of the call is poor
• Check the signal strength indicator on the display
). The number of bars indicates the signal
strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to a
window if you are in a building.
No number is dialled when you re-call a
Phonebook entry
• Use the Contact list feature to ensure the number
has been stored correctly.
• Re-store the number, if necessary.
The battery doesn’t charge properly or the
phone sometimes turns itself off
• Wipe the charge contacts both on the phone and
on the battery with a clean soft cloth.
86
If the above guidelines do not help you to
solve the problem, take note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
Health and safety information
Your wireless phone is a radio transmitter and
receiver. It is designed and manufactured not to
exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S.
Government. These limits are part of
comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines are based on the
safety standards that were developed by
independent scientific organizations through
periodic and through evaluation of scientific
studies.
The standards include a substantial safety margin
designed to assure the safety of all persons,
regardless of age and health.
Health and safety information
Exposure to Radio Frequency
(RF) Signals
The exposure standard for wireless phones
employs a unit of measurement known as
Specific Absorption Rate (SAR). The SAR limit set
by the FCC is 1.6W/kg*.
*In the U.S. and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg)
averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give
additional protection for the public and to account for any
variations in measurements.
87
Health and safety information
SAR tests are conducted using standard operating
positions specified by the FCC with the phone
transmitting at its highest certified power level in
all tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can
be well below the maximum value. This is because
the phone is designed to operate at multiple power
levels so as to use only the power required to reach
the network. In general, the closer you are to a
wireless base station antenna, the lower the power
output of the phone. Before a new model phone is
available for sale to the public, it must be tested
and certified to the FCC that it does not exceed the
limit established by the government-adopted
requirement for safe exposure. The tests are
performed in positions and locations (e.g., at the
ear and worn on the body) as required by the FCC
for each model. While there may be differences
between the SAR levels of various phones and at
88
various positions, they all meet the government
requirement.
The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this
model phone is on file with the FCC and can be
found under the Display Grant section of http://
www.fcc.gov/oet/fccid after searching on FCC ID
printed in the label on the phone.
FCC certification information for this model phone
is attached separation paper.
For Body Operation
For body worn operation, this model phone has
been tested and meets the FCC RF exposure
guidelines when used with a Samsung-supplied or
approved accessory designated for this product or
when used with and accessory that contains no
metal and that positions the handset a minimum
from the body.
For more Information concerning exposure to radio
frequency signals, see the following websites:
Federal Communications Commission (FCC)
http://www.fcc.gov/rfsafety
Cellular Telecommunications Industry Association
(CTIA):
http://www.wow-com.com
U.S.Food and Drug Administration (FDA)
http://www.fda.gov/cdrh/consumer
World Health Organization (WHO)
http://www.who.int/peh-emf/en
• Never use any charger or battery that is
damaged in any way.
• Use the battery only for its intended purpose.
Health and safety information
The minimum distance for this model phone is
written in the FCC certification information from
the body. None compliance with the above
conditions may violate FCC RF exposure guidelines.
Precautions When Using Batteries
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge and the type of battery and
charger used. The battery can be charged and
discharged hundreds of times, but it will
gradually wear out. When the operation time
(talk time and standby time) is noticeably
shorter than normal, it is time to buy a new
battery.
• If left unused, a fully charged battery will
discharge itself over time.
89
Health and safety information
• Use only Samsung-approved batteries and
recharge your battery only with Samsungapproved chargers. When a charger is not in use,
disconnect it from the power source. Do not
leave the battery connected to a charger for
more than a week, since overcharging may
shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling
or warming first.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and lifetime of
the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold
battery may temporarily not work, even when
the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below 0
°ýC (32 °ýF).
90
• Do not short-circuit the battery. Accidental
shortcircuiting can occur when a metallic object
(coin, clip or pen) causes a direct connection
between the + and . terminals of the battery
(metal strips on the battery), for example when
you carry a spare battery in a pocket or bag.
Short-circuiting the terminals may damage the
battery or the object causing the short-circuiting.
• Dispose of used batteries in accordance with
local regulations. Always recycle. Do not dispose
of batteries in a fire.
Road Safety
Your wireless phone gives you the powerful ability
to communicate by voice, almost anywhere,
anytime. But an important responsibility
accompanies the benefits of wireless phones, one
that every user must uphold.
1. Get to know your wireless phone and its
features, such as speed dial and redial. If
available, these features help you to place your
call without taking your attention off the road.
2. When available, use a hands-free device. If
possible, add an extra layer of convenience and
safety to your wireless phone with one of the
many hands-free accessories available today.
3. Position your wireless phone within easy reach.
Be able to access your wireless phone without
removing your eyes from the road. If you get
an incoming call at an inconvenient time, let
your voice mail answer it for you.
4. Let the person you are speaking with know you
are driving; if necessary, suspend the call in
heavy traffic or hazardous weather conditions.
Rain, sleet, snow, ice and even heavy traffic can
be hazardous.
Health and safety information
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, practice good common
sense and remember the following tips.
5. Do not take notes or look up phone numbers
while driving. Jotting down a To Do list or
flipping through your phonebook takes your
attention away from your primary
responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your
car will be stationary. If you need to make a call
while moving, dial only a few numbers, check
the road and your mirrors, then continue.
7. Do not engage in stressful or emotional
conversations that may be distracting. Make the
people with whom you are talking aware that
91
Health and safety information
you are driving and suspend conversations that
have the potential to divert your attention from
the road.
8. Use your wireless phone to call for help. Dial
the emergency number in the case of fire,
traffic accident or medical emergencies.
Remember, it is a free call on your wireless
phone!
9. Use your wireless phone to help others in
emergencies. If you see a car accident, crime in
progress or other serious emergency where
lives are in danger, call the emergency number,
as you would want others to do for you.
10.Call roadside assistance or a special
nonemergency wireless assistance number
when necessary. If you see a broken-down
vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no
92
one appears injured, or a vehicle you know to
be stolen, call roadside assistance or any other
special nonemergency wireless number.
Operating Environment
Remember to follow any special regulations in
force in any area and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory
operation of the equipment and for the safety of
personnel, it is recommended that the equipment
should only be used in the normal operating
position (held to your ear with the antenna
pointing over your shoulder).
Electronic Devices
Pacemakers
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimize potential interference
If you have any reason to suspect that interference
is taking place, switch off your phone immediately.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives. Other
Medical Devices If you use any other personal
medical devices, consult the manufacturer of your
device to determine if it is adequately shielded
Settings
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and
recommendations of Wireless Technology
Research.
• Should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone
is switched on
Health and safety information
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
Persons with pacemakers:
93
Health and safety information
from external RF energy. Your physician may be
able to assist you in obtaining this information.
Switch off your phone in health care facilities when
any regulations posted in these areas instruct you
to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external
RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should
also consult the manufacturer of any equipment
that has been added to your vehicle.
Posted Facilities
Switch off your phone in any facility where posted
notices require you to do so.
94
Potentially Explosive Atmospheres
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all
signs and instructions. Sparks in such areas could
cause an explosion or fire resulting in bodily injury
or even death. Users are advised to switch off the
phone while at a refueling point (service station).
Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel
depots (fuel storage and distribution areas),
chemical plants or where blasting operations are in
progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
To make an emergency call, proceed as follows.
Emergency calls
2. Key in the emergency number for your present
location (for example, 112 or any other official
emergency number). Emergency numbers vary
by location.
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
Settings
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
3. Press the
Health and safety information
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks, as
well as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical
emergencies, for example).
1. If the phone is not on, switch it on.
When making an emergency call, remember to
give all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
95
Health and safety information
accident; do not end the call until given permission
to do so.
Other important safety information
• Only qualified personnel should service the
phone or install the phone in a vehicle. Faulty
installation or service may be dangerous and
may invalidate any warranty applicable to the
device.
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
• Do not store or carry flammable liquids, gases,
or explosive materials in the same compartment
as the phone, its parts, or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
96
wireless equipment in the area over the air bag
or in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
• Switch off your phone before boarding an
aircraft. The use of wireless phones in aircraft
may be dangerous to the operation of the
aircraft, and is illegal.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
Care and maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Keep the phone and all its parts and accessories
out of the reach of small children.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
• Do not use harsh chemicals, cleaning solvents,
or strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove, or a radiator.
The phone may explode when overheated.
Settings
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
Health and safety information
• Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that will corrode
electronic circuits.
phone, which may damage the phone’s
electronic circuit boards.
• Use only the supplied or an approved
replacement antenna. Unauthorised antennas or
97
Health and safety information
modified accessories may damage the phone
and violate regulations governing radio devices.
• If the phone, battery, charger, or any accessory
is not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
Acknowledging Special Precautions and
the FCC and Industry Canada Notice
Cautions
Modifications not expressly approved by the party
responsible for compliance could void the user's
authority to operate the equipment.
FCC Compliance Information
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful
interference, and
98
2. This device must accept any interference
received.
Including interference that may cause undesired
operation.
Information to User
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Consult the dealer or an experienced radio/ TV
technician for help.
Appendix A: CERTIFICATION
INFORMATION (SAR)
Your wireless phone is a radio transmitter and
receiver. It is designed and manufactured not to
exceed the emission limits for exposure to radio
frequency(RF) energy set by the Federal
The exposure standard for wireless mobile phones
employs a unit of measurement known as the
Specific Absorption Rate(SAR). The SAR limit set
by the FCC is 1.6 W/kg. SAR Tests are conducted
using standard operating positions accepted by the
FCC with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
Settings
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO
WAVES.
Health and safety information
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Communications Commission of the U.S.
Government. These limits are part of
comprehensive guidelines and establish permitted
levels of RF energy for the general population. The
guidelines are based on safety standards that were
developed by independent scientific organizations
through periodic and thorough evaluation of
scientific studies. The standards include a
substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
99
Health and safety information
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the
network. In general, the closer you are to a
wireless base station antenna, the lower the power
output.
Before a new model phone is available for sale to
the public, it must be tested and certified to the
FCC that it does not exceed the limit established by
the governmentadopted requirement for safe
exposure. The tests are performed in positions and
locations(e.g., at the ear and worn on the body) as
required by the FCC for each model.
The highest SAR values for this model phone as
reported to the FCC are Head: 1.09 W/Kg, Bodyworn: 0.448 W/Kg. Body-worn operations are
restricted to Samsungsupplied, approved or none
Samsung designated accessories that have no
metal and must provide at least 1.5cm separation
100
between the device, including its antenna whether
extended or retracted, and the user’s body. None
compliance to the above restrictions may violate
FCC RF exposure guidelines
The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this
model phone is on file with the FCC and can be
found under the Display Grant section of http://
www.fcc.gov/oet/fccid after searching on FCC ID
A3LSGHE350.
Appendix B: Guide to Safe and Responsible
Wireless Phone Use
Cellular Telecommunications & Internet Association
“Safety is the most important call you will ever make.”
A Guide to Safe and Responsible Wireless
Phone Use
The basic lessons are ones we all learned as
teenagers. Driving requires alertness, caution and
courtesy. It requires a heavy dose of basic common
But with wireless phone use, driving safely means a
little more. This brochure is a call to wireless phone
users everywhere to make safety their first priority
when behind the wheel of a car. Wireless
telecommunications is keeping us in touch, simplifying
our lives, protecting us in emergencies and providing
opportunities to help others in need. When it comes to
the use of wireless phones, safety is your most
important call.
Wireless Phone “Safety Tips”
Below are safety tips to follow while driving and using
a wireless phone which should be easy to remember:
Settings
But an important responsibility accompanies those
benefits, one that every wireless phone user must
uphold. When driving a car, driving is your first
responsibility. A wireless phone can be an invaluable
tool, but good judgment must be exercised at all times
while driving a motor vehicle whether on the phone or
not.
sense-keep your head up, keep your eyes on the road,
check your mirrors frequently and watch out for other
drivers. It requires obeying all traffic signs and signals
and staying within the speed limit. It means using seat
belts and requiring other passengers to do the same.
Health and safety information
TENS OF MILLIONS OF PEOPLE IN THE U.S. TODAY
TAKE ADVANTAGE OF THE UNIQUE COMBINATION OF
CONVENIENCE, SAFETY AND VALUE DELIVERED BY
THE WIRELESS TELEPHONE. QUITE SIMPLY, THE
WIRELESS PHONE GIVES PEOPLE THE POWERFUL
ABILITY TO COMMUNICATE BY VOICE-ALMOST
ANYWHERE, ANYTIME-WITH THE BOSS, WITH A
CLIENT, WITH THE KIDS, WITH EMERGENCY
PERSONNEL OR EVEN WITH THE POLICE. EACH YEAR,
AMERICANS MAKE BILLIONS OF CALLS FROM THEIR
WIRELESS PHONES, AND THE NUMBERS ARE RAPIDLY
GROWING.
1. Get to know your wireless phone and its
features such as speed dial and redial. Carefully
read your instruction manual and learn to take
101
Health and safety information
advantage of valuable features most phones
offer, including automatic redial and memory.
Also, work to memorize the phone keypad so
you can use the speed dial function without
taking your attention off the road.
2. When available, use a hands free device. A
number of hands free wireless phone
accessories are readily available today. Whether
you choose an installed mounted device for
your wireless phone or a speaker phone
accessory, take advantage of these devices if
available to you.
3. Position your wireless phone within easy reach.
Make sure you place your wireless phone within
easy reach and where you can grab it without
removing your eyes from the road. If you get
an incoming call at an inconvenient time, if
possible, let your voice mail answer it for you.
102
4. Suspend conversations during hazardous
driving conditions or situations. Let the person
you are speaking with know you are driving; if
necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet,
snow and ice can be hazardous, but so is heavy
traffic. As a driver, your first responsibility is to
pay attention to the road.
5. Do not take notes or look up phone numbers
while driving. If you are reading an address
book or business card, or writing a “to do” list
while driving a car, you are not watching where
you are going. It’s common sense. Don’t get
caught in a dangerous situation because you
are reading or writing and not paying attention
to the road or nearby vehicles.
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan your calls before
8. Use your wireless phone to call for help. Your
wireless phone is one of the greatest tools you
can own to protect yourself and your family in
dangerous situations-with your phone at your
9. Use your wireless phone to help others in
emergencies. Your wireless phone provides you
a perfect opportunity to be a “Good Samaritan”
in your community. If you see an auto accident,
crime in progress or other serious emergency
where lives are in danger, call 9-1-1 or other
local emergency number, as you would want
others to do for you.
10.Call roadside assistance or a special wireless
non emergency assistance number when
necessary. Certain situations you encounter
while driving may require attention, but are not
urgent enough to merit a call for emergency
services. But you still can use your wireless
Settings
7. Do not engage in stressful or emotional
conversations that may be distracting. Stressful
or emotional conversations and driving do not
mix-they are distracting and even dangerous
when you are behind the wheel of a car. Make
people you are talking with aware you are
driving and if necessary, suspend conversations
which have the potential to divert your
attention from the road.
side, help is only three numbers away. Dial 9-11 or other local emergency number in the case
of fire, traffic accident, road hazard or medical
emergency. Remember, it is a free call on your
wireless phone!
Health and safety information
you begin your trip or attempt to coincide your
calls with times you may be stopped at a stop
sign, red light or otherwise stationary. But if
you need to dial while driving, follow this simple
tip-dial only a few numbers, check the road and
your mirrors, then continue.
103
Health and safety information
phone to lend a hand. If you see a broken-down
vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no
one appears injured or a vehicle you know to be
stolen, call roadside assistance or other special
non-emergency wireless number.
Careless, distracted individuals and people driving
irresponsibly represent a hazard to everyone on the
road. Since 1984, the Cellular Telecommunications
Industry Association and the wireless industry have
conducted educational outreach to inform wireless
phone users of their responsibilities as safe drivers
and good citizens. As we approach a new century,
more and more of us will take advantage of the
benefits of wireless telephones. And, as we take to the
roads, we all have a responsibility to drive safely.
“The wireless industry reminds you to use your phone
safely when driving.”
Cellular Telecommunications & Internet Association
For more information, please call 1-888-901-SAFE.
104
For updates: http://www.wow-com.com/consumer/
issues/driving/articles.cfm?ID =85
Appendix C: Consumer Update on Wireless
Phones
U.S. Food and Drug Administration
1. What kinds of phones are the subject of this
update?
The term wireless phone refers here to hand-held
wireless phones with built-in antennas, often called
cell, mobile, or PCS phones. These types of wireless
phones can expose the user to measurable radio
frequency energy (RF) because of the short distance
between the phone and the user s head. These RF
exposures are limited by Federal Communications
Commission safety guidelines that were developed
with the advice of FDA and other federal health and
safety agencies. When the phone is located at greater
distances from the user, the exposure to RF is
drastically lower because a person’s RF exposure
decreases rapidly with increasing distance from the
2. Do wireless phones pose a health hazard?
Under the law, FDA does not review the safety of
radiation emitting consumer products such as wireless
phones before they can be sold, as it does with new
drugs or medical devices. However, the agency has
authority to take action if wireless phones are shown
to emit radio frequency energy (RF) at a level that is
hazardous to the user. In such a case, FDA could
require the manufacturers of wireless phones to notify
users of the health hazard and to repair, replace or
recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
Settings
The available scientific evidence does not show that
any health problems are associated with using
wireless phones. There is no proof, however, that
wireless phones are absolutely safe. Wireless phones
emit low levels of radio frequency energy (RF) in the
microwave range while being used. They also emit
very low levels of RF when in the stand-by mode.
Whereas high levels of RF can produce health effects
(by heating tissue), exposure to low level RF that does
not produce heating effects causes no known adverse
health effects. Many studies of low level RF exposures
have not found any biological effects. Some studies
have suggested that some biological effects may
occur, but such findings have not been confirmed by
additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
3. What is FDA’s role concerning the safety of wireless
phones?
Health and safety information
source. The so-called “cordless phones,” which have a
base unit connected to the telephone wiring in a
house, typically operate at far lower power levels, and
thus produce RF exposures well within the FCC’s
compliance limits.
• Support needed research into possible biological
effects of RF of the type emitted by wireless
phones;
105
Health and safety information
• Design wireless phones in a way that minimizes
any RF exposure to the user that is not
necessary for device function; and
• The National Institutes of Health participates in
some interagency working group activities, as
well.
• Cooperate in providing users of wireless phones
with the best possible information on possible
effects of wireless phone use on human health
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health agencies
for safety questions about wireless phones.
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at
the federal level. The following agencies belong to this
working group:
• National Institute for Occupational Safety and
Health
• Environmental Protection Agency Federal
Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information
Administration
106
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from
these base stations are typically thousands of times
lower than those they can get from wireless phones.
Base stations are thus not the primary subject of the
safety questions discussed in this document.
4. What is FDA doing to find out more about the
possible health effects of wireless phone RF?
FDA has been a leading participant in the World Health
Organization International Electromagnetic Fields
(EMF) Project since its inception in 1996. An influential
result of this work has been the development of a
detailed agenda of research needs that has driven the
establishment of new research programs around the
world. The Project has also helped develop a series of
public information documents on EMF issues.
If there is a risk from these products—and at this point
we do not know that there is—it is probably very
small. But if you are concerned about avoiding even
potential risks, you can take a few simple steps to
minimize your exposure to radio frequency energy
(RF). Since time is a key factor in how much exposure
a person receives, reducing the amount of time spent
using a wireless phone will reduce RF exposure.
If you must conduct extended conversations by
wireless phone every day, you could place more
distance between your body and the source of the RF,
since the exposure level drops off dramatically with
distance. For example, you could use a headset and
carry the wireless phone away from your body or use a
wireless phone connected to a remote antenna
Settings
FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative
Research and Development Agreement (CRADA) to do
research on wireless phone safety. FDA provides the
scientific oversight, obtaining input from experts in
government, industry, and academic organizations.
CTIA-funded research is conducted through contracts
to independent investigators. The initial research will
include both laboratory studies and studies of wireless
phone users. The CRADA will also include a broad
assessment of additional research needs in the
context of the latest research developments around
the world.
5. What steps can I take to reduce my exposure to
radio frequency energy from my wireless phone?
Health and safety information
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
107
Health and safety information
Again, the scientific data do not demonstrate that
wireless phones are harmful. But if you are concerned
about the RF exposure from these products, you can
use measures like those described above to reduce
your RF exposure from wireless phone use.
6. What about children using wireless phones?
The scientific evidence does not show a danger to
users of wireless phones, including children and
teenagers. If you want to take steps to lower exposure
to radio frequency energy (RF), the measures
described above would apply to children and
teenagers using wireless phones. Reducing the time of
wireless phone use and increasing the distance
between the user and the RF source will reduce RF
exposure.
Some groups sponsored by other national
governments have advised that children be
discouraged from using wireless phones at all. For
example, the government in the United Kingdom
distributed leaflets containing such a recommendation
in December 2000. They noted that no evidence exists
108
that using a wireless phone causes brain tumors or
other ill effects. Their recommendation to limit
wireless phone use by children was strictly
precautionary; it was not based on scientific evidence
that any health hazard exists.
7. Do hands-free kits for wireless phones reduce risks
from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free
kits can be used with wireless phones for convenience
and comfort. These systems reduce the absorption of
RF energy in the head because the phone, which is the
source of the RF emissions, will not be placed against
the head. On the other hand, if the phone is mounted
against the waist or other part of the body during use,
then that part of the body will absorb more RF energy.
Wireless phones marketed in the U.S. are required to
meet safety requirements regardless of whether they
are used against the head or against the body. Either
configuration should result in compliance with the
safety limit.
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that accessories that claim to shield the head
from those emissions reduce risks. Some products
that claim to shield the user from RF absorption use
special phone cases, while others involve nothing
more than a metallic accessory attached to the phone.
Studies have shown that these products generally do
not work as advertised. Unlike “hand-free” kits, these
so-called “shields” may interfere with proper operation
of the phone. The phone may be forced to boost its
power to compensate, leading to an increase in RF
absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold
devices that claimed to protect wireless phone users
from radiation with making false and unsubstantiated
claims. According to FTC, these defendants lacked a
reasonable basis to substantiate their claim.
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted
cardiac pacemakers and defibrillators from wireless
telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of
Medical instrumentation (AAMI). The final draft, a joint
effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This
standard will allow manufacturers to ensure that
cardiac pacemakers and defibrillators are safe from
wireless phone EMI.
FDA has tested hearing aids for interference from
handheld wireless phones and helped develop a
voluntary standard sponsored by the Institute of
Electrical and Electronic Engineers (IEEE). This
standard specifies test methods and performance
requirements for hearing aids and wireless phones so
that no interference occurs when a person uses a
Settings
9. What about wireless phone interference with
medical equipment?
Health and safety information
8. Do wireless phone accessories that claim to shield
the head from RF radiation work?
109
Health and safety information
compatible phone and a compatible hearing aid at the
same time. This standard was approved by the IEEE in
2000.
FDA continues to monitor the use of wireless phones
for possible interactions with other medical devices.
Should harmful interference be found to occur, FDA
will conduct testing to assess the interference and
work to resolve the problem.
10. What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radio frequency energy
(RF) exposures characteristic of wireless phones have
yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies,
however, have suggested that low levels of RF could
accelerate the development of cancer in laboratory
animals. However, many of the studies that showed
increased tumor development used animals that had
been genetically engineered or treated with cancer
110
causing chemicals so as to be pre-disposed to develop
cancer in the absence of RF exposure. Other studies
exposed the animals to RF for up to 22 hours per day.
These conditions are not similar to the conditions
under which people use wireless phones, so we don t
know with certainty what the results of such studies
mean for human health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use
of wireless phones and primary brain cancer, gioma,
meningioma, or acoustic neuroma, tumors of the brain
or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful
health effects from wireless phone RF exposures.
However, none of the studies can answer questions
about long-term exposures, since the average period
of phone use in these studies was around three years.
11. What research is needed to decide whether RF
exposure from wireless phones poses a health
risk?
FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
Occupational Safety and Health Administration’s
(OSHA):
http://www.osha-slc.gov/SLTC/
radiofrequencyradiation/index.html
National Institute for Occupational Safety and Health
(NIOSH):
http://www.cdc.gov/niosh/emfpg.html
Settings
12. Which other federal agencies have responsibilities
related to potential RF health effects?
Additional information on the safety of RF exposures
from various sources can be obtained from the
following organizations.
Health and safety information
A combination of laboratory studies and
epidemiological studies of people actually using
wireless phones would provide some of the data that
are needed. Lifetime animal exposure studies could be
completed in a few years. However, very large
numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one
exists. Epidemiological studies can provide data that is
directly applicable to human populations, but 10 or
more years follow-up may be needed to provide
answers about some health effects, such as cancer.
This is because the interval between the time of
exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many
years. The interpretation of epidemiological studies is
hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones.
Many factors affect this measurement, such as the
angle at which the phone is held, or which model of
phone is used.
World health Organization (WHO):
http://www.who.int/peh-emf/
International Commission on Non-Ionizing Radiation
Protection:
http://www.icnirp.de
111
Health and safety information
National Radiation Protection Board (UK):
http://www.nrpb.org.uk*
* Updated 4/3/2002: US Food and Drug Administration
http://www.fda.gov/cellphones
112
Index
Alarm • 41
Answering
call • 25
second call • 26
Anykey answer • 76
Auto redial • 76
Backlight time, set • 77
Band selection • 81
Barring, calls • 80
Battery
charging • 7
low indicator • 8
precautions • 88
Broadcast messages • 61
Browser, WAP • 43
Calculator • 42
Calendar • 65
Call costs • 30
Call records
dialled • 29
missed • 29
received • 30
113
Call time • 30
Caller group, managing • 33
Caller ID • 81
Calls
answering • 25
barring • 80
diverting • 79
emergency • 95
holding • 26
redialling • 24
rejecting • 25
waiting • 80
Camera
photos • 69
videos • 72
Care • 96
CB (Cell Broadcast) messages •
61
Characters, enter • 21
Conference call • 28
Connection tone • 79
Converter • 42
Creating calendar
anniversaries • 66
events • 66
miscellaneous • 66
tasks • 67
Creating messages
e-mail • 48
MMS • 48
SMS • 47
Deleting
call records • 30
e-mails • 54
missed alarms • 69
MMS messages 51
phonebook • 35
photos • 72
SMS messages • 50
video clips • 75
Dialled calls • 29
Display
icons • 10
language • 75
settings • 77
Diverting, calls • 79
DTMF tones, send • 27
E-mails
creating/sending • 48
deleting • 54
setting • 58
viewing • 54
Emergency calls • 95
FDN (Fixed Dial Number) mode
• 83
File manager • 62
Games • 39
Greeting message • 75
Holding, call • 26
Icons, description • 10
Images, downloaded • 62
Inbox, messages
e-mail • 54
MMS • 51
SMS • 49
Infrared, connect • 82
Input mode, change • 21
International calls • 24
Internet • 43
Key tone volume • 78
Keypad tones
sending • 27
setting • 78
Index
Language, select • 75
Last number, redial • 24
Locking
media contents • 83
phone • 83
SIM card • 83
Low battery indicator • 8
114
Maintenance • 96
Memory status
downloaded items • 65
phone • 84
phonebook • 35
Message tone • 78
Messages
e-mail • 48
greeting • 75
MMS • 48
SMS • 47
web • 51
Minute minder • 79
Missed alarm events • 68
Missed calls • 29
MMS messages
creating/sending • 48
deleting • 51
setting • 57
viewing • 49
MP3 player
options • 37
playing • 36
Multi-party calls • 28
Music, downloaded • 63
Muting
key tones • 27
microphone • 26
Name card • 34
Names
entering • 21
searching • 31
Network band, select • 81
Network selection • 80
Network services • 79
Outbox, messages • 52
Password
barring • 80
phone • 83
Phone
display • 10
icons • 10
locking • 83
password • 83
resetting • 84
switching on/off • 8
unpacking • 6
Phonebook
copying • 31
deleting • 35
editing • 31
managing • 34
options • 31
speed-dialling • 33
Photos
deleting • 72
taking • 69
viewing • 71
PIN, change • 82
PIN2, change • 83
Power on/off tone • 78
Precaution • 1
Privacy • 83
Problems, solve • 84
Received calls • 30
Received message
cell broadcast • 61
e-mail • 54
MMS • 51
SMS • 51
web • 51
Recording
videos • 72
voice memos • 37
Redialling
automatically • 76
manually • 24
Resetting phone • 84
Ringer
incoming calls • 78
messages • 78
Roaming • 80
Safety
information • 96
precautions • 1
Security, calls • 82
Sent messages • 53
SIM card
inserting • 7
locking • 83
SMS messages
creating/sending • 47
deleting • 50
viewing • 49
Sound settings • 78
Sounds, downloaded • 64
Speed-dial • 33
Stopwatch • 43
Switching on/off
microphone • 26
phone • 8
Templates
MMS • 55
text • 55
Text, enter • 21
Timer • 42
Index
Videos
deleting • 75
playing • 74
recording • 72
Voice memos
playing • 38
recording • 37
Waiting call • 80
WAP browser • 43
World time • 40
115
Index
116

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2005:06:13 11:02:36-03:00
Create Date                     : 2005:06:13 10:58:07-03:00
Title                           : C:\Documents and Settings\Admi...
Author                          : 
Creator                         : PScript5.dll Version 5.2
Producer                        : Acrobat Distiller 6.0 (Windows)
Page Count                      : 120
Mod Date                        : 2005:06:13 11:02:36-03:00
Creation Date                   : 2005:06:13 10:58:07-03:00
Metadata Date                   : 2005:06:13 11:02:36-03:00
EXIF Metadata provided by EXIF.tools
FCC ID Filing: A3LSGHE350

Navigation menu