Samsung Electronics Co SGHE370 Single-Band PCS GSM/ EDGE Phone with Bluetooth User Manual

Samsung Electronics Co Ltd Single-Band PCS GSM/ EDGE Phone with Bluetooth Users Manual

Users Manual

Download:
Mirror Download [FCC.gov]
Document ID	641471
Application ID	CcTwS52wlsVQI6IzBZH4Hw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	132.46kB (1655758 bits)
Date Submitted	2006-03-28 00:00:00
Date Available	2006-08-10 00:00:00
Creation Date	2006-03-08 16:24:04
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2006-03-08 16:24:34
Document Title	Users Manual

* Depending on the software installed or your service provider or country,
some of the descriptions in this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear
different from the illustrations in this guide.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-xxxxA
English. 02/2006. Rev. 1.0
3
ft 0
Dra 02. 21
6.
xx
200 0XAx
SGH-E370
User’s Guide
Drive safely at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Keep your phone away from small children
All wireless phones may be subject to interference,
which could affect their performance.
Keep the phone and all its parts, including accessories,
out of the reach of small children.
Be aware of special regulations
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories could
damage your phone and may be dangerous.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Emergency calls
Key in the emergency number for your present
location, then press
Important safety precautions
Interference
• The phone could explode if the battery is replaced
with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see "Health and
safety information" on page 88.
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful attention
to the subsequent information regarding safety
or phone features.
Indicates that you can get more information on
the referenced page.
→
Indicates that you need to press the Navigation
keys to scroll to the specified option and then
select it.
< >
Indicates a key on the phone. For example,
Indicates a soft key, whose function is displayed
on the phone screen. For example,
•
Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
Special features of your phone
•
MP3 player
Play MP3 music files using your
phone as an MP3 player.
•
Web browser
Access the wireless web to get upto-the-minute information and a
wide variety of media content.
1.
•
•
Get personal with photo caller
ID
See who’s calling you when the
phone displays their very own
photo displays.
Name card
Create name cards with your
number and profile. Whenever
introducing yourself to others, use
this convenient electronic name
card.
•
Multimedia message service (MMS)
Send and receive MMS messages with a
combination of text, images, video, and audio.
•
E-mail
Send and receive e-mails with images, video, and
audio attachments.
•
Java game
Enjoy Java™-based embedded
games and download new games.
•
Calendar
Keep track of your daily, weekly,
and monthly schedule.
•
Voice recorder
Record memos or sounds.
Special features of your phone
•
Bluetooth
Send photos, images, videos, and
other personal data, and connect
to other devices using free,
wireless Bluetooth technology.
Contents
Unpack
Make sure you have each item
Your phone
Buttons, features, and locations
Get started
First steps to operating your phone
Install and charge the phone ..................................... 7
Power on or off........................................................ 8
Keys and display ..................................................... 9
Access menu functions ............................................ 11
Customise your phone............................................. 12
Make/Answer calls .................................................. 15
Step outside the phone
15
Begin with your camera, the Music player, the web, and
other special features
Use the camera ...................................................... 15
Play music ............................................................. 16
Browse the web......................................................
Use Phonebook ......................................................
Send messages ......................................................
View messages.......................................................
Use Bluetooth ........................................................
17
18
19
20
21
Enter text
23
ABC, T9, Number, and Symbol modes
Call functions
25
Advanced calling features
Menu functions
29
All menu options listed
Solve problems
86
Help and personal needs
Health and safety information
88
Index
108
Overview of menu functions
To access Menu mode, press in Idle mode.
1 Call records
p.29
3 Applications
p.35
5 Messages
p.45
p.29
p.30
p.30
p.30
p.30
p.30
p.31
p.35
p.37
p.38
p.39
p.40
p.40
p.41
p.41
p.42
p.42
p.45
p.48
p.53
p.54
p.54
p.60
p.61
Recent contacts
Missed calls
Dialled calls
Received calls
Delete all
Call time
Call costs*
2 Phonebook
p.31
p.31
p.32
p.32
p.33
p.34
p.34
p.35
p.35
p.35
Contact list
FDN list
Add new contact
Group
Speed dial
My name card
Own number
Management
Service number*
Music player
Voice recorder
Java world
World time
Alarm
Calculator
Converter
Timer
Stopwatch
SIM AT*
4 Browser
p.42
p.42
p.43
p.44
p.44
p.44
p.45
Home
Bookmarks
Goto URL
Clear cache
Profile settings
Current profile
Create new message
My messages
Templates
Delete all
Settings
Broadcast messages
Memory status
6 File manager
p.61
p.61
p.62
p.63
p.64
p.64
p.65
Images
Videos
Music
Sounds
Other files
Memory status
7 Calendar
p.65
8 Camera
p.69
9 Settings
p.74
p.74
p.74
p.76
p.77
p.79
p.79
p.81
p.84
p.85
p.85
Time & Date
Phone settings
Display settings
Sound settings
Light settings
Network services
Bluetooth
Security
Memory status
Reset settings
* Shows only if supported by your
SIM card.
Unpack
Your phone
Make sure you have each item
Buttons, features, and locations
Earpiece
Camera lens
Phone
Travel Adapter
Display
Web access/
Confirm key
Left soft key
Volume keys
Battery
User’s Guide
You can obtain various accessories from
your local Samsung dealer.
The items supplied with your phone
and the accessories at your Samsung
dealer may vary, depending on your
country or service provider.
Dial key
Navigation keys
(Up/Down/Left/
Right)
Right soft key
Power on/off/
Menu exit key
Correct key
Alphanumeric
keys
Special
function keys
Microphone
Headset jack
Camera key
Get started
Install the battery.
First steps to operating your phone
Plug the travel adapter
into the phone.
SIM card information
When you subscribe to a cellular network, you receive
a plug-in SIM (Subscriber Identity Module) card
loaded with your subscription details, such as your
PIN, and available optional services.
Install and charge the phone
Remove the battery.
Insert the SIM card.
Plug the adapter into a standard AC wall outlet.
When the phone is completely charged, unplug the
adapter from the power outlet.
If the phone is already on,
first turn it off by pressing
and holding [ ].
Make sure that the goldcoloured contacts on the
card are face down.
Get started
Remove the adapter from the phone.
Power on or off
Switch on
1. Open the phone.
2. Press and hold [
the phone.
Do not turn on the
phone when
mobile phone use
is prohibited.
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the battery low message displays, and
• the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
] to turn on
3. If necessary, enter the PIN and
press .
1. Open the phone.
Switch off
2. Press and hold [
].
Keypad lock
When you close the phone, the keypad lock feature
locks the exposed keys so that nothing will happen if
the keys are accidentally pressed.
To unlock the keypad, press and press
.
Keys and display
Keys
In Idle mode, access your favourite
menus directly.p. 75
In Menu mode, scroll through menu
options.
In Idle mode, launch the web browser.
In Menu mode, select the highlighted
menu option.
Delete characters from the display or an
item in an application.
Make or answer a call.
In Idle mode, retrieve numbers recently
dialled, missed, or received.
Press and hold to switch the phone on
and off.
End a call.
In Menu mode, cancel input and return
the phone to Idle mode.
Get started
Perform the function indicated on the
bottom line of the display.
Enter numbers, letters, and some special
characters.
In Idle mode, press and hold [1] to
access your voicemail server. Press and
hold [0] to enter an international call
prefix.
Enter special characters.
In Idle mode, press and hold [ ] to
activate or deactivate Quiet mode. Press
and hold [ ] to insert a pause between
numbers.
Adjust the phone volume.
In Idle mode, with the phone open,
adjust the keypad tone volume. With the
phone closed, press and hold to turn on
the backlight.
In Idle mode, press and hold to turn on
the camera.
In Camera mode, take a photo or start
recording a video.
Get started
Display
New text message
Layout
Icons
display various icons.
Text and graphics
display messages,
instructions, and
information you enter.
Menu
Icons
Contacts
Soft key function
indicators
show the current functions
assigned to the soft keys.
Received signal strength
Call in progress
Out of your service area; you
cannot send or receive calls
Home Zone, if you have
registered for the appropriate
service
Roaming network
10
New multimedia message
New e-mail
New voicemail
Call diverting feature active
p. 79
Bluetooth active p. 81
Alarm set p. 40
Call ringer settings p. 77
• No indicator: Melody
•
: Vibration
•
: Vibration then melody
•
: Melody then vibration
Quiet mode
Battery power level
* Depending on your country or service provider, the icons shown
on the display may vary.
Access menu functions
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current role.
Select
Press the left
soft key to select
the highlighted
option.
Select an
option
1. Press a desired soft key.
2. Press the Navigation keys to
move to the next or previous
option.
Get started
Use the soft
keys
3. Press when Check
new mail is highlighted to
retrieve an e-mail or a header.
3. Select an e-mail or a header.
4. If you selected a header, press
and select
Retrieve.
Turn on
Bluetooth
In Idle mode, press and
select Settings → Bluetooth →
Activation → On.
Search for and
pair with a
Bluetooth
device
1. In Idle mode, press
and select Settings →
Bluetooth → My devices →
Search new device.
2. Select a device.
3. Enter a Bluetooth PIN or the
other device’s Bluetooth PIN, if
it has one, and press .
When the owner of the other
device enters the same code,
pairing is complete.
21
Step outside the phone
Send data
1. Access an application,
Phonebook, File manager, or
Calendar.
2. Select an item.
3. Press and select
Send via → Bluetooth.
4. Select Search new device.
5. Select a device.
6. If necessary, enter the
Bluetooth PIN and press .
Receive data
To receive data via Bluetooth, your
phone’s Bluetooth feature must be
active.
If necessary, press to
confirm that you are willing to
receive.
22
Enter text
ABC, T9, Number, and Symbol modes
You can enter text for some features such as
messaging, Phonebook, or Calendar, using ABC mode,
T9 mode, Number mode, and Symbol mode.
Using ABC mode
Press the appropriate key until the character you want
appears on the screen.
Key
Characters in order displayed
Upper case
Lower case
Changing the text input mode
•
•
•
Press and hold [ ] to switch between T9 and ABC
modes.
Press [ ] to change case or switch to Number
mode.
Press and hold [ ] to switch to Symbol mode.
(Creating an SMS message with GSM alphabet encoding)
23
Enter text
Other ABC mode operations
•
•
•
•
To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
Press [ ] to insert a space.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Using T9 mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
Entering a word in T9 mode
1. Press [2] to [9] to start entering a word. Press
each key once for each letter.
For example, press [4], [3], [5], [5], and [6] to
enter hello in T9 mode.
T9 predicts the word that you are typing, and it
may change with each key that you press.
24
2. Enter the whole word before editing or deleting
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [0] to display alternative word
choices for the keys that you have pressed.
For example, of and me use [6] and [3].
4. Press [ ] to insert a space and enter the next
word.
Other T9 mode operations
•
•
•
•
Press [1] to enter periods or apostrophes
automatically.
Press [ ] to insert a space.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Adding a new word to the T9 dictionary
This feature may not be available for some languages.
1. Enter the word that you want to add.
2. Press [0] to display alternative words for your key
presses. When there are no more alternative
words, Spell appears on the bottom line.
3. Press .
4. Enter the word you want using ABC mode and
press .
Using Number mode
Number mode enables you to enter numbers.
Press the keys corresponding to the digits you want.
Call functions
Advanced calling features
Making a call
1. In Idle mode, enter the area code and phone
number.
2. Press [ ].
Press [C] to clear the last digit or press and hold
[C] to clear the whole display. You can move the
cursor to edit an incorrect digit.
Using Symbol mode
Making an international call
Symbol mode enables you to insert symbols.
1. In Idle mode, press and hold [0]. The + character
appears.
2. Enter the country code, area code, and phone
number, then press [ ].
To
Press
display more symbols
[Up] or [Down].
select a symbol
the corresponding
number key.
clear the entered symbol(s)
[C].
insert the symbol(s)
.
Redialling recent numbers
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press [ ].
25
Call functions
Making a call from Phonebook
Answering a call
Once you have stored a number in Phonebook, you
can dial the number by selecting it from
Phonebook.p. 31
When you receive an incoming call, the phone rings
and displays the incoming call image.
You can also use the speed dial feature to assign your
most frequently called numbers to specific number
keys.p. 34
Tips for answering a call
You can quickly dial a number from the SIM card using
its location number assigned when stored.
1. In Idle mode, enter the location number for the
phone number you want and press [ ].
2. Find the number you want.
3. Press or [ ] to dial the number you want.
Ending a call
Close the phone or press [
26
].
Press or [
•
•
•
] to answer the call.
When Anykey answer is active, you can press
any key, except for and [ ].p. 76
Press or [ ] to reject a call.
Press and hold [ / ] to reject a call or mute the
ringer, depending on the Volume key setting.
p. 76
Viewing missed calls
If you have missed calls, the screen displays how
many calls you have missed.
1. Press .
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
Using the speakerphone feature
Use the headset to make or answer calls without
holding the phone.
Use the phone as a speakerphone to talk and listen
with the phone a short distance away.
1. During a call, plug the speaker into the phone.
Speaker mode is automatically activated.
2. Press [
] to return to normal phone mode.
Connect the headset to the jack on the right side of
the phone. The button on the headset works as
follows:
To
Press
Placing a call on hold/Retrieving
redial the last call
the button and then press
and hold it again.
Press or to place a call on hold
or retrieve the call.
answer a call
and hold the button.
end a call
and hold the button.
Making a second call
Options during a call
You can access a number of functions during a call.
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume during a call.
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
Call functions
Using the headset
You can make another call if your network supports it.
1. Press to put the call on hold.
2. Make the second call in the normal way.
3. Press to switch between the calls.
4. Press and select End held call to end
the call on hold.
5. To end the current call, press [ ].
27
Call functions
Answering a second call
You can answer an incoming call while already on the
phone, if your network supports it and you have
activated the call waiting feature.p. 80
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press to switch between the calls.
3. To end the current call, press [ ].
•
To communicate with answering machines or
computerised telephone systems, Send keys
must be selected.
•
•
Using In-call options
Press to access the following options
during a call:
• Voice clarity on/Voice clarity off: remove
extraneous noise and increase call quality so that
the person with whom you are speaking can hear
you clearly even if you are in a noisy place.
• Mute/Unmute: switch off the phone's microphone
so that the other person on the phone cannot hear
you, or switch it back on.
28
Mute keys/Send keys: switch the key tones on
or off.
•
•
•
Phonebook: access the contact list.
Send DTMF: send the DTMF (Dual tone multifrequency) tones as a group. The DTMF tones are
the tones used in phones for tone dialling,
sounding when you press the number keys. This
option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
Message: send a new message or access received
messages.
Join: set up a multi-party call by adding a caller
on hold to a currently active call. You can include
up to 5 people on a multi-party call.
Transfer: transfer the currently active call to a
caller on hold. The two callers can talk to each
other, but you are disconnected from the call.
•
•
•
•
•
End held call: disconnect the call currently on
hold.
Split: have a private conversation with one
multiparty call participant. The other participants
can converse with each other. After the private
conversation, select Join to return both all private
participants to the multi-party call.
Remove: disconnect one multi-party call
participant.
Switch to headset/Switch to phone: switch the
call to a Bluetooth stereo headset or hands-free
car kit or back to the phone.
SIM service: access special services, such as
news, weather forecasts, entertainment, and
location services, provided by your SIM card. This
option is available when you use a SIM card
supporting SIM Application Toolkit menus, and may
be differently displayed depending on your service
provider.
Menu functions
All menu options listed
Call records (Menu 1)
Use this menu to view the calls you have dialled,
received, or missed, and the length of the calls. You
can also check the cost of your calls, if your SIM card
supports this function.
To access this menu, press in Idle mode and
select Call records.
Recent contacts (Menu 1.1)
This menu displays the most recent calls dialled,
received, or missed.
Accessing a call record
1. Press [Left] or [Right] to move to another call
type.
2. Press [Up] or [Down] to scroll through the call list.
3. Press [
] to view the details of a call, or press
[ ] to dial a number.
29
Menu functions
Using call record options
Delete all (Menu 1.5)
While viewing call details, press to access
the following options:
• Save as contacts: save the number in
Phonebook.
• Send message: send an SMS or MMS message to
the selected number.
• Delete: delete the selected call record or all
records.
Use this menu to delete all of the records in each call
type.
1. Press [
] to select the call types to be cleared.
2. Press .
3. Press to confirm the deletion.
Missed calls (Menu 1.2)
This menu displays the most recent calls you did not
answer.
Dialled calls (Menu 1.3)
This menu displays the most recent calls you have
dialled.
Received calls (Menu 1.4.)
This menu displays the most recent calls you have
received.
30
Call time (Menu 1.6)
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
• Last call time: check the length of your last call.
• Total sent: check the total length of all the calls
you have dialled.
• Total received: check the total length of all the
calls you have received.
• Reset timers: reset the call timers. You need to
enter the phone password.
The password is preset to 00000000. You can
change this password. p. 84
Call costs (Menu 1.7)
Phonebook
This network feature displays the cost of calls. This
menu is available only if supported by your SIM card.
Note that this is not intended to be used for billing
purposes.
• Last call cost: check the cost of your last call.
• Total cost: check the total cost of all of your calls.
If the total cost exceeds the maximum cost set in
Set max cost, you must reset the counter before
you can make another call.
• Max cost: check the maximum cost limit set in
Set max cost.
• Reset counters: reset the cost counters.
• Set max cost: set the maximum cost authorised
for your calls.
• Price/Unit: set the price per unit that is applied
when the cost of your calls is calculated.
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Phonebook.
(Menu 2)
Menu functions
To access this menu, press in Idle mode and
select Phonebook.
Contact list (Menu 2.1)
Phonebook (Menu 2)
Use this menu to search for numbers in Phonebook.
Press in Idle mode to quickly access
this menu.
Finding an entry
1. Enter the first few letters of the name that you
want to find.
2. Select the name from the list.
3. Scroll to a number, and press [ ] to dial or press
] to edit contact information.
31
Menu functions
32
Using Phonebook options
Adding a contact
While viewing contact details, press to
access the following options:
• Edit: edit contact information.
• Send message: send an SMS or MMS message to
the selected number, or an e-mail to the selected
address.
• Copy: copy the contact to the phone’s memory,
the SIM card, or FDN list.
• Send via: send the contact via SMS, MMS, e-mail,
or Bluetooth.
• Delete: delete the selected contact.
• Print via Bluetooth: print the contact information
via a Bluetooth-compatible printer.
1. Press and select Add.
2. Enter your PIN2 and press .
3. Enter information.
• Name: assign a name.
• Phone number: add a phone number.
• Location: assign a location number.
4. Press to save the contact.
FDN list (Menu 2.2)
Storing a number in the phone’s memory
Use this menu to create a list of contacts to be used in
FDN (Fixed Dialling Number) mode, in which the
phone allows outgoing calls only to the specified
phone numbers, if your SIM card supports this
feature. You can activate FDN mode in the FDN mode
menu.p. 85
1. Select Phone.
2. Change the settings or enter information about the
contact.
• First name/Last name: assign a name.
Using contact options
Scroll to a contact and press to access
options.“Using Phonebook options”
Add new contact (Menu 2.3)
Use this menu to add a new contact to Phonebook.
•
1. Select SIM.
2. Enter information about the contact.
• Name: assign a name.
• Phone number: add a number.
• Location: assign a location number.
To assign a caller ID image, ringtone, or group,
the contact must be saved to the phone’s
memory.
Use this menu to organise your contacts in caller
groups.
Adding members to a caller group
1. Select a group.
2. Press .
3. Select a contact to be added.
Managing caller groups
Phonebook (Menu 2)
Storing a number on the SIM card
Group (Menu 2.4)
Menu functions
Mobile/Home/Office/Fax/Other: add a
number in any type.
• Email: assign an e-mail address.
• Graphic ID: assign an image to alert you to a
call from the person.
• Alert: assign a ringtone to alert you to a call
from the person.
• Group: assign the contact to a caller group.
• Notes: add a memo about the person.
3. Press to save the contact.
While viewing the group list, press to
access the following options:
• View: display the members of the selected group.
• Add: add a new group.
• Edit: change the properties of the selected group.
• Send message: send an SMS, MMS, or e-mail
message to the group members you want.
• Delete: delete the selected group. Group
members, however, will not be deleted from
Phonebook.
3. Press to save the contact.
33
Menu functions
Speed dial (Menu 2.5)
My name card (Menu 2.6)
Use this menu to assign a speed dial number (2 to 9)
for 8 of your most frequently called numbers.
Use this menu to create a name card and send it to
other people.
Assigning speed dial numbers
Saving your name card
1. Select a key location from 2 to 9. Key 1 is reserved
for your voicemail server.
2. Select a contact from the contact list.
3. Select a number, if the contact has more than one
number.
The procedure for creating your name card is the
same as the one for saving a phone number in the
phone’s memory.p. 32
Managing speed dial entries
From the Speed dial screen, press to
access the following options:
• Add: assign a number to an unassigned key.
• View: check the name and number assigned to a
key.
• Change: assign a different number to a key.
• Remove: clear the speed dial setting for a key.
Dialling speed dial entries
In Idle mode, press and hold the appropriate key.
34
Using name card options
After saving your name card, press to
access the following options:
• Edit: edit the name card.
• Send via: send the name card via SMS, MMS,
e-mail, or Bluetooth.
• Exchange namecard: exchange name cards with
another person via Bluetooth.
• Remove: delete the name card.
• Print via Bluetooth: print your contact
information via a Bluetooth-compatible printer.
Service number (Menu 2.9)
Use this feature to check your phone numbers, or to
assign a name to each of the numbers. Changes made
here do not affect the actual subscriber numbers on
your SIM card.
Use this menu to view the list of Service Dialling
Numbers (SDN) assigned by your service provider,
including emergency numbers and numbers for
directory enquiries. This menu is available if your SIM
card supports SDN.
1. Scroll to the number you want.
2. Press or [ ].
Management (Menu 2.8)
Applications
Applications (Menu 3)
Use this menu to manage Phonebook entries.
• Default saving: select a default memory location
to save contacts. If you select Ask on saving, the
phone will ask you to select a memory location
each time you save a number.
• Copy all to: copy all of the contacts stored on
your SIM card to your phone’s memory, or vice
versa.
• Sort by contacts: change the sort order of
Phonebook entries.
• Delete all: delete all of the contacts from your
phone’s memory, SIM card, or FDN list.
• Memory status: check the number of contacts
you have stored in your phone’s memory and on
the SIM card.
Menu functions
Own number (Menu 2.7)
(Menu 3)
Use this menu to play Java games or play music files.
You can also use convenient features, such as a voice
recorder, alarm clock, calculator, converter, and
stopwatch.
To access this menu, press in Idle mode and
select Applications.
Music player (Menu 3.1)
Use this menu to enjoy music. First, you need to save
music files into your phone’s memory.
35
Menu functions
Downloading or receiving music files
Use these methods to save music files to your phone’s
memory:
• Download from the wireless webp. 42
• Download from a computer using the Samsung PC
Studio programSamsung PC Studio User’s
Guide
• Receive via an active Bluetooth connectionp. 84
Playing music files
From the Music player screen, press [
].
During playback, use the following keys:
Keys
Function
Pauses or resumes playback.
The downloaded or received files are stored in the
Music folder.p. 63
Left
Returns to the previous file. Moves
backward in a file when held down.
Creating a play list
Right
Skips to the next file. Moves forward in a
file when held down.
Up
Opens the play list.
1. From the Music player screen, press
and select Add to list.
2. Select either of the following options:
• Add all: add all of the files in the phone’s
memory to the play list.
• Add a file: add specific files to the play list.
] to select
3. If you selected Add a file, press [
the files you want and press .
36
4. Press to go back to the Music player
screen.
Down
Stops playback.
Adjusts the volume level.
Changes the playback animation.
Changes the repeat mode.
Turns Shuffle mode on or off.
Using Music player options
From the Music player screen, press [Up] to access the
play list.
Press to access the following options:
• Play: play the currently selected file.
•
Add to list: add files to the play list.
Change order: move the selected file to the
position you want within the play list.
Remove: remove the selected file or all files from
the play list.
Voice recorder (Menu 3.2)
Use this menu to record voice memos. A voice memo
can be up to one hour long.
Recording a voice memo
Applications (Menu 3)
Accessing the play list
•
•
Menu functions
During playback, press to access the
following options:
• Pause/Play: pause or begin playback.
• Open play list: access the play list.
• Remove: remove the selected file from the play
list.
• Settings: change the default settings for playing
music files.
Repeat mode: select a repeat mode.
Shuffle: set the Music player to play music in
random order.
Visualization: change the playback animation.
Volume: select a volume level.
• Details: access the file properties.
1. Press [
] to start recording.
2. Speak into the microphone.
Press [
] to pause or resume the recording.
3. Press or [Down] to end the recording.
The voice memo is saved automatically.
4. Press [
] to review the voice memo, or press
[Up] to record a new memo.
Playing a voice memo
1. From the Voice recorder screen, press
and select Go to voice list.
2. Select a voice memo.
37
Menu functions
During playback, use the following keys:
Keys
Function
Left
Moves backward in a memo.
Right
Moves forward in a memo.
Up
Switches to Record mode for a new voice
memo.
Down
Stops playback.
Pauses or resumes playback.
Adjusts the volume.
Changing voice recorder settings
38
You can change the default settings for the voice
recorder. From the Voice recorder screen, press
and select Settings to access the
following options:
• Recording time: select a maximum recording
time.
• Volume: select a volume level.
• Default name: change the default prefix of voice
memos.
Java world (Menu 3.3)
Use this menu to access and play Java games and to
change the network settings for accessing Java
services.
Accessing a game
Select a game from the game list and follow the
onscreen instructions. The procedure may differ from
game to game.
Using Java application options
From the application list, press to access
the following options:
• Start: launch the selected application.
• Delete: delete the selected application.
• Details: access the application properties.
• Permission: set permission settings for services
charging you additional costs, such as network
access and SMS.
• Protection: lock the application to protect it from
being deleted, or unlock the application.
•
•
•
When the proxy is set to Disable:
- DNS1: enter the primary DNS address.
- DNS2: enter the secondary DNS address.
Menu functions
•
World time (Menu 3.4)
Use this menu to find out what time it is in another
part of the world.
Viewing world time
1. From the world map, press [Left] or [Right] to
scroll to the city you want. As the time line moves,
the time and date of the given zone display.
2. Press [
] to save the time zone.
Applications (Menu 3)
Upgrade: upgrade the application to the latest
version, except for embedded games.
Send information via SMS: send the URL
containing the application via SMS, except for
embedded games.
Memory status: access memory information for
applications.
Network settings: set up a connection profile to
be used for applications requiring network access.
The following options are available:
APN: enter the access point name.
Login ID: enter the user ID.
Password: enter the password.
Proxy: select whether or not you use a proxy
server to access network services. Depending on
this setting, options in Proxy settings vary.
Proxy settings: provide you with the following
options:
When the proxy is set to Enable:
- IP address: enter the HTTP proxy address.
- Port: enter the port number.
Applying daylight savings time
1. From the world map, press and select
Set daylight saving time.
2. Press [
] to select the time zones you want.
3. Press .
39
Menu functions
Alarm (Menu 3.5)
Use this menu to set alarms to sound at specific times.
Setting an alarm
1. Select the type of alarm.
2. Set each alarm option:
• Alarm: activate the alarm.
• Alarm time: enter the time for the alarm to
ring.
• AM/PM: set AM or PM in 12-hour format.
• Alarm day: select the days on which you want
the alarm to sound. If you select Once alarm,
the alarm sounds at the specified time and
then is deactivated.
• Alarm tone: select an alarm tone.
3. Press .
Stopping an alarm
•
•
40
For a non-wake-up alarm, press any key.
For a wake-up alarm, press or [
].
Press any key, except and [
], to stop the
alarm and cause it to sound again after 5 minutes.
You can do this a maximum of five times.
Setting the alarm to sound even if the phone
is off
From the Alarm screen, select Auto power → On.
If the phone is off when it is time for the alarm to ring,
the phone is switched on and sounds the alarm.
Deactivating an alarm
1. Select the alarm you want to deactivate.
2. Select Off on the Alarm line.
3. Press .
Calculator (Menu 3.6)
Use this menu to perform basic arithmetic functions,
such as addition, subtraction, multiplication, and
division.
1. Enter the first number.
• Press <.()> to insert a decimal point or
bracket.
• Press [ ] or [ ] to move the cursor.
2. Press one of the Navigation keys to access the
math function you want.
3. Enter the second number.
4. Press [
] to view the result.
5. If necessary, repeat from step 2 to continue the
calculation.
Use this menu for common conversions, such as
currency and temperature.
Performing a conversion
Timer (Menu 3.8)
Use this menu to set a period of time for the phone to
count down. The phone will sound an alarm when the
specified period of time has expired.
Applications (Menu 3)
1. Select a converter.
2. Press [Left] or [Right] to select the original unit
and press [Down].
3. Enter the value to be converted and press [Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to above
zero (+) or below zero (-)
4. Press [Left] or [Right] to select the unit to which
you want to convert.
The equivalent value for the amount you entered
displays.
Press to access the following options:
• Clear: clear the current values.
• Reverse: reverse the conversion.
• Currency rates: display the currency rate list.
Menu functions
Converter (Menu 3.7)
Using converter options
Starting the timer
1. Press .
2. Enter the length of time you want to count down
and press .
3. Press [
] to start counting down.
Stopping the timer
•
•
Press any key when the timer rings.
Press [
] on the Timer screen to stop the timer
before it rings.
41
Menu functions
Stopwatch (Menu 3.9)
Browser
Use this menu to measure elapsed time. The
maximum time is 10 hours.
1. Press [
] to start the stopwatch.
2. Press [
] to check an interval. You can repeat
this step for a total of 4 intervals.
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
From the wireless web, you can access up-to-date
information and a wide variety of media content, such
as games, wallpapers, ringtones, and music files.
SIM AT (Menu 3.0)
To access this menu, press in Idle mode and
select Browser.
This menu is available if you use a SIM AT card that
supports SIM Application Toolkit menus and provides
additional services, such as news, weather, sports,
entertainment, and location services. Available
services may vary, depending on your service
provider’s plans. For details, see your SIM card
instructions or contact your service provider.
42
(Menu 4)
Home (Menu 4.1)
Use this menu to connect your phone to the network
and load the homepage of the wireless web service
provider. You can also press [
] in Idle mode.
Navigating the web browser
To
Press
scroll through browser items
[Up] or [Down].
select a browser item
return to the previous page
or [C].
return to the homepage
and hold [C].
> or [
].
Exiting the browser
From any web page, press [ ] or select
on the top
of the screen to access the following options:
• Back: go back to the previous page.
• Home: return to the homepage.
• Exit: exit the web browser.
• Reload: reload the current page with updated
information.
• Show URL: display the URL address of the current
web page.
• About...: access version information for the web
browser.
Press [ ] to end the network connection and exit the
browser.
Accessing other phone menus
Selecting a bookmark item launches the web browser
and accesses the associated web page.
Bookmarks (Menu 4.2)
Use this menu to save URL addresses in order to
quickly access web pages.
Adding a bookmark
1. Select an empty location.
2. Enter a name for the bookmark and press [Down].
3. Enter a URL address and press [
].
Browser (Menu 4)
From any web page, press [ ] to access the following
options:
• Goto URL: enter a URL address manually.
• Bookmarks: access the bookmark list.
• Messages: send SMS messages or view the
messages stored on the phone.
• File manager: access the File manager menu.
Menu functions
Using browser menu options
Accessing a bookmarked page
Using bookmark options
After saving an item, press to access the
following options:
• Go: access the bookmarked web page.
• Edit: edit the address and name of the bookmark.
43
Menu functions
•
Delete: delete the selected bookmark or all
bookmarks.
•
•
Goto URL (Menu 4.3)
Use this menu to manually enter a URL address and
access the associated web page.
Clear cache (Menu 4.4)
Use this menu to clear information stored in the cache.
A cache is a temporary memory that stores recently
accessed web pages.
Profile settings (Menu 4.5)
Use this menu to select a connection profile to be used
for accessing the wireless web. Contact your service
provider for details about your settings options.
For each profile, the following options are available:
• Profile name: enter a profile name.
• Home URL: enter the URL address of the page to
be used as your homepage.
• Bearer: select the network bearer type.
44
•
Proxy: activate or deactivate the proxy server.
GPRS settings: customise the following GPRS
network settings:
When the proxy is set to Enable:
Proxy IP: enter the HTTP proxy server address.
Proxy port: enter the port number.
APN: enter the access point name of the GPRS
network gateway.
Login ID: enter the user ID.
Password: enter the password.
When the proxy is set to Disable:
DNS1: enter the primary address.
DNS2: enter the secondary address.
APN: enter the access point name of the GPRS
network gateway.
Login ID: enter the user ID.
Password: enter the password.
GSM settings: customise the following GSM
network settings:
Use this menu to activate one of the proxy servers you
have set up.
Use the Messages menu to send and receive text
messages, multimedia messages, and e-mails. You
can also use push message and cell broadcast
message features.
To access this menu, press in Idle mode and
select Messages.
Create new message (Menu 5.1)
Messages (Menu 5)
Current profile (Menu 4.6)
Messages (Menu 5)
Menu functions
When the proxy is set to Enable:
Proxy IP: enter the HTTP proxy server address.
Proxy port: enter the port number.
Dial number: enter the PPP server phone number.
Login ID: enter the user ID.
Password: enter the password.
Data call type: select a data call type.
When the proxy is set to Disable:
DNS1: enter the primary address.
DNS2: enter the secondary address.
Dial number: enter the PPP server phone number.
Login ID: enter the user ID.
Password: enter the password.
Data call type: select a data call type.
Use this menu to create and send messages.
Text message (Menu 5.1.1)
Short Message Service (SMS) allows you to send or
receive text messages that may include pictures,
animated images, and melodies.
1. Enter your message.
The maximum number of characters allowed in a
message varies by service provider. If your
message exceeds the maximum number of
characters, the phone will split the message.
45
Menu functions
2. Press to access one of the following
options:
• Send only: send the message.
• Save and send: save the copy of the message
and send it.
• Insert: add a template, Phonebook entry, or
bookmark into text.
• Add picture/Add animation/Add melody:
attach a simple image, animated image, or
melody.
• Attach: add a name card or calendar data as
data format attachments.
• Save to: save the message in the Draft or My
folder box.
• Language select: change the language used
in T9 input mode.
• Text style: change the text attributes.
3. When you have finished, press and
select Send only or Save and send.
4. Enter a destination number.
To send the message to more than one recipient,
fill in additional destination fields.
46
5. Press [
] to send the message.
Multimedia message (Menu 5.1.2)
Multimedia Message Service (MMS) delivers messages
containing a combination of text, image, video, and
audio, from phone to phone or from phone to e-mail.
1. Select the Subject line.
2. Enter the message subject and press [
].
3. Select the Picture & Video or Sound line and add
an image, a video, or a sound file.
• The maximum size allowed for a message can
differ, depending on your service provider.
• Depending on the file type or DRM (Digital
Rights Management) system, some files may
not be able to be forwarded.
4. Select the Message line.
5. Enter the message text and press [
].
6. Press to access the following options:
• Edit: edit the subject or text of your message.
• Change image/Change video/Change
sound: replace an added item.
E370-2.fm Page 47 Tuesday, February 21, 2006 11:29 AM
•
To send the message to more than one recipient,
fill in additional destination fields.
9. Press [
] to send the message.
Email (Menu 5.1.3)
Menu functions
You can create and send e-mails that include text,
audio, and images. To use this feature, you need to
subscribe to an e-mail service and set up your e-mail
account and profile.p. 58, p. 60
1. Select the Subject line.
2. Enter the subject of your e-mail and press [
].
3. Select the Message line.
4. Enter the e-mail text and press [
].
5. Select the File attach line to access the following
options:
• Add image/Add videos/Add sounds/Add
music: add media files stored in the phone’s
memory.
Messages (Menu 5)
Add image/Add video: add an image or video
file.
• Preview: view the message as it will be shown
on the recipient’s phone.
• Send: send the message.
• Save to: save the message.
• Add page: add pages. Move to each page by
pressing [Left] or [Right].
• Delete page: delete an added page.
• Edit page: change the duration of page display
or move the page forward among the other
pages.
• Attach: attach name cards or calendar data as
data format attachments, or a document file
stored in the Other files folder.
• Remove subject/Remove media/Remove
sound/Remove message: remove an added
item.
7. When you have finished, press and
select Send.
8. Enter a phone number or e-mail address.
Depending on the file type or DRM (Digital
Rights Management) system, some files may
not be able to be forwarded.
47
Menu functions
•
Other files: add document files stored in the
Other files folder.
• Send: send the message.
• Save to: save the message in the Draft or My
folder box.
• Attach: attach name cards or calendar data as
data format attachments.
6. When you have finished, press to
access the following options:
• Add image/Add videos/Add sounds/Add
music: add media files stored in the phone’s
memory.
• Other files: add document files stored in the
Other files folder.
• Edit: edit the subject or text.
• View: play an added item.
• Send: send the message.
• Save to: save the message in the Draft or My
folder box.
• Attach: attach name cards or calendar data as
data format attachments.
48
•
Remove subject/Remove message: clear
the subject or text.
• Remove: delete the selected attachment or all
attachments.
• Remove all attachments: delete all
attachments.
7. When you have finished, press and
select Send.
8. Enter an e-mail address.
To send the e-mail to more than one recipient, fill
in additional destination fields.
9. Press [
] to send the e-mail.
My messages (Menu 5.2)
Use this menu to access messages you have received,
sent, or which have failed in sending.
Inbox (Menu 5.2.1)
This folder stores all of the messages you have
received, except for e-mails.
Viewing a message
Using message options
While viewing a message, press to access
the following options:
SMS messages
• Reply via: reply to the sender via SMS or MMS.
•
•
•
•
•
Forward: forward the message to other people.
Delete: delete the message.
Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
Add to block list: add the sender’s number to the
Block list to reject the messages from the sender.
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
Cut media: save media content from the message
into your phone’s memory.
Print via Bluetooth: print the message via a
Bluetooth-compatible printer.
Protection: protect the message from being
deleted.
Messages (Menu 5)
• Depending on the DRM (Digital Rights
Management) system, messages having web
content may not be able to be forwarded.
• A ! icon next to a message means that the
message is of high priority. A grey-coloured
message icon indicates low priority.
•
•
•
Menu functions
The following icons may appear on the message list;
depending on the message type or status, icons may
vary:
•
SMS / Delivery report
•
MMS
•
MMS notification ( : Being retrieved,
Failed to retrieve)
•
Push message from web servers
MMS messages/MMS notifications
• Retrieve: retrieve the MMS message from the
MMS server.
• Reply via SMS: reply to the sender via SMS.
• Reply via MMS to: reply to the sender via MMS.
49
Menu functions
•
•
•
•
•
•
•
Forward: forward the message to other people.
Delete: delete the message.
Add to block list: add the sender’s number to the
Block list to reject the messages from the sender.
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
Cut media: save media content from the message
into your phone’s memory.
Protection: protect the message from being
deleted.
Details: access the message properties.
Push messages
• Go to URL: connect to the URL specified in the
message.
• Delete: delete the message.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
Configuration message
• Install: apply the configuration specified in the
message to your phone.
50
•
•
•
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
Delete: delete the message.
Protection: protect the message from being
deleted.
Delivery report messages
• Delete: delete the message.
Draft (Menu 5.2.2)
This folder stores messages you have saved to send at
a later time.
From the message list, press to access
the following options:
• View: open the message.
• Edit: edit the message.
• Send: send the message.
• Delete: delete the selected message or all
messages.
• Move to my folder: move the message to the My
folder box.
•
•
Outbox (Menu 5.2.3)
•
•
•
•
Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
Print via Bluetooth: print the message via a
Bluetooth-compatible printer.
Protection: protect the message from being
deleted.
Details: access the message properties.
Sentbox (Menu 5.2.4)
While viewing a message, press to access
the following options:
• Send again: send the message again.
• Open file: open the attached file.
• Save file: save the attached file in the phone’s
memory.
• Forward: forward the message to other people.
• Delete: delete the message.
While viewing a message, press to access
the following options:
• Open file: open the attached file.
• Save file: save the attached file in the phone’s
memory.
• Forward: forward the message to other people.
• Delete: delete the message.
• Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
Messages (Menu 5)
This folder stores messages that the phone is
attempting to send or has failed to send.
Menu functions
•
•
Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
Sort by: change the sort order of the message list.
Protection: protect the message from being
deleted.
Details: access the message properties.
This folder stores messages that you have sent.
51
Menu functions
•
•
•
Print via Bluetooth: print the message via a
Bluetooth-compatible printer.
Protection: protect the message from being
deleted.
Details: access the message properties.
Email box (Menu 5.2.5)
This folder stores e-mails that you have received.
1. Select an e-mail account.
2. Press .
Call barring (Menu 9.6.2)
This network service allows you to restrict your calls.
1. Select a call barring option:
• All outgoing: prohibit outgoing calls.
• International: prohibit international calls.
• International except home: only allow calls
to numbers within the current country when
you are abroad, and to your home country.
• All incoming: prohibit incoming calls.
• Incoming while abroad: prohibit incoming
calls when you use your phone outside of your
home service area.
• Cancel all: cancel all call barring settings,
allowing calls to be sent and received normally.
80
•
Change barring password: change the call
barring password obtained from your service
provider.
2. Select the type of calls to be barred.
3. Select Activate. To deactivate call barring, select
Deactivate.
4. Enter the call barring password supplied by your
service provider and press .
To deactivate call waiting, select Deactivate.
Network selection (Menu 9.6.4)
This network service allows you to manually select the
network to be used while roaming outside of your
home area, or to let the network be chosen
automatically.
You can select a network other than your home
network only if there is a valid roaming agreement
between the two.
This network service allows you to prevent your phone
number from being displayed on the phone of the
person being called. If you select Default, the phone
will use the default setting provided by the network.
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you may need to change to an
appropriate band.
Voice mail server (Menu 9.6.6)
Bluetooth (Menu 9.7)
Use this menu to store the number of the voicemail
server and access your voicemails.
Using the Bluetooth feature, you can connect the
phone wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or control
the phone remotely.
You must enter the voice server number before you
can access your voicemails. Your service provider
can give the voice server number.
•
•
Connect to voice mail: connect to the voicemail
server to listen to your messages.
Voice server number: enter the voicemail server
name and number.
Settings (Menu 9)
Some networks may not allow you to change this
setting.
For the phone to make and receive phone calls, it
must register with an available network. Your phone
can handle any of the following types of networks:
GSM 1900, Combined GSM 900/1800, and Tri band
(GSM 900/1800/1900).
Menu functions
Caller ID (Menu 9.6.5)
Band selection (Menu 9.6.7)
Bluetooth technology allows free wireless connections
between all Bluetooth-compliant devices within a
range of 10 meters. Since the devices communicate
using radio waves, they do not need to be in line of
sight to each other.
81
E370-2.fm Page 82 Tuesday, February 21, 2006 11:14 AM
Menu functions
• If there are obstacles between the devices, the
operating distance may be reduced.
• It is recommended that you don’t use the
Bluetooth feature while using multimedia features,
such as voice recorder, camera, and MP3 player,
or vice versa, for better performance.
• Some devices may not be compatible with your
phone.
Setting up the Bluetooth feature
The Bluetooth menu provides the following options:
• Activation: activate or deactivate the Bluetooth
feature.
• My devices: search for connectable Bluetooth
devices.
• My phone’s visibility: allow other Bluetooth
devices to search for your phone.
• My phone’s name: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
• Secure mode: determine if the phone asks for
your confirmation when other devices access your
data.
82
•
Bluetooth services: display available Bluetooth
services.
Searching for and pairing with a Bluetooth
device
1. From the Bluetooth setting options, select My
devices.
2. Select Search new device.
After searching, a list of devices to which you can
connect displays. The following icons indicate the
type of device:
•
Headset
•
Printer
•
Computer
•
PDA
•
Mobile phone
•
Unknown device
The colour of the icon indicates the status of the
the device:
• Grey for unpaired devices
• Blue for paired devices
• Red for devices that are currently connected to
your phone
3. Select a device.
Some devices, especially headsets or hands-free car
kits, may have a fixed Bluetooth PIN, such as 0000.
If the other device has a code, you must enter it.
Using device options
•
Authorize device/Unauthorize device:
determine whether or not the phone asks you to
permit connection when other devices try to
connect to your phone.
Delete: remove the selected device or all devices
from the list.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item you want
to send is stored.
3. Select the item you want
4. Press and select Send via →
Bluetooth.
5. Select Search new device.
The phone searches for devices within range and
displays a list of available devices.
6. Select a device.
7. If necessary, enter the Bluetooth PIN needed for
pairing and press .
Settings (Menu 9)
From the device list, press to access the
following options:
• Connect: connect to a headset or hands-free car
kit.
• Disconnect: end the connection with the
connected device.
• Browse files: search for data from the device and
import data directly to your phone.
• Service list: access the Bluetooth service list of
the device.
• Rename: rename the paired device.
•
Menu functions
4. Enter a Bluetooth PIN and press . This code
is used just once and you don’t need to memorise
it.
When the owner of the other device enters the
same code, pairing is complete.
83
Menu functions
Receiving data via Bluetooth
PIN check (Menu 9.8.1)
To receive data via Bluetooth, your phone’s Bluetooth
feature must be active.
1. If an unauthorised Bluetooth device sends data to
your phone, press to allow the device to
access your phone.
2. Press to receive data.
The 4- to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
Security (Menu 9.8)
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
If you enter an incorrect PIN/PIN2 three times in
succession, the SIM card is blocked. To unblock it,
you need to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are supplied by your
network operator.
Change PIN (Menu 9.8.2)
Use this menu to change your PIN. The PIN check
feature must be enabled to use this feature.
Phone lock (Menu 9.8.3)
Use this menu to lock the phone from unauthorised
use. When this feature is enabled, you must enter a 4to 8-digit phone password each time the phone is
switched on.
The password is preset to 00000000. To change the
password, use the Change password menu.
Change password (Menu 9.8.4)
Use this menu to change your phone password.
84
Privacy (Menu 9.8.5)
Memory status (Menu 9.9)
Use this menu to lock access to messages, media files,
or all menu functions on the phone, except for call
functions. When a privacy option is enabled, you must
enter the phone password to access the locked items
or functions.
Use this menu to check the amount of memory for
messages, media items, calendar items, contacts, and
Java applications. You can also check the shared
memory for MMS, Email, and File manager.
SIM lock (Menu 9.8.6)
This menu allows your phone to work only with the
current SIM card by assigning a SIM lock code. You
must enter the SIM lock code to use a different SIM
card.
FDN mode (Menu 9.8.7)
If supported by your SIM card, Fixed Dialling Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored on
the SIM card.
Reset settings (Menu 9.0)
Use this menu to reset the phone settings, display
settings, and sound settings individually.
1. Press [
] to select the setting categories to be
reset
2. Press .
3. Press to confirm the reset.
4. Enter the phone password and press .
The password is preset to 00000000. You can
change this password p. 84
Change PIN2 (Menu 9.8.8)
If supported by your SIM card, use this menu to
change your current PIN2.
85
Solve problems
Help and personal needs
To save the time and expense of an unnecessary service
call, perform the simple checks in this section before
contacting a service professional.
“No Service,” “Network Failure,” or “Not
Done” displays
When you switch on your phone, the
following messages may appear:
•
“Insert SIM card”
• Be sure that the SIM card is correctly installed.
•
“Phone lock”
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
“Enter PIN”
• You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu.
86
“Enter PUK”
• The PIN has been entered incorrectly three times
in succession, and the SIM card is now blocked.
Enter the PUK supplied by your service provider.
The network connection has been lost. You may be
in a weak signal area. Move and try again.
You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
You have entered a number but it was not
dialled
•
•
•
Be sure that you have pressed [ ].
Be sure that you have accessed the right cellular
network.
Be sure that you have not set an outgoing call
barring option.
Your correspondent cannot reach you
•
Be sure that your phone is switched on. ([
pressed for more than one second.)
•
•
No number is dialled when you re-call a
Phonebook entry
•
Use the Contact list feature to ensure the number
has been stored correctly.
Re-store the number, if necessary.
Your correspondent cannot hear you speaking
•
•
The battery doesn’t charge properly or the
phone sometimes turns itself off
•
Be sure that you have switched on the
microphone.
Be sure that you are holding the phone close
enough to your mouth. The microphone is located
at the bottom of the phone.
The phone starts beeping and “Battery low”
flashes on the display
•
Your battery is insufficiently charged. Recharge the
battery.
The audio quality of the call is poor
•
•
Check the signal strength indicator on the display
). The number of bars indicates the signal
strength from strong (
) to weak ( ).
Try moving the phone slightly or moving closer to a
window if you are in a building.
•
Solve problems
Be sure that you are accessing the correct cellular
network.
Be sure that you have not set an incoming call
barring option.
Wipe the charging contacts both on the phone and
on the battery with a clean soft cloth.
If the above guidelines do not help you to
solve the problem, take note of:
•
•
•
The model and serial numbers of your phone
Your warranty details
A clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
87
NorthAmerica_Cingular_T-mobile.fm Page 88 Wednesday, February 22, 2006 9:32 PM
Health and safety information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
exposure limits for radio frequency (RF) energy set by
the Federal Communications Commission (FCC) of the
U.S. government. These FCC exposure limits are
derived from the recommendations of two expert
organizations, the National Counsel on Radiation
Protection and Measurement (NCRP) and the Institute
of Electrical and Electronics Engineers (IEEE). In both
cases, the recommendations were developed by
scientific and engineering experts drawn from
industry, government, and academia after extensive
reviews of the scientific literature related to the
biological effects of RF energy.
88
The exposure limit set by the FCC for wireless mobile
phones employs a unit of measurement known as the
Specific Absorption Rate (SAR). The SAR is a measure
of the rate of absorption of RF energy by the human
body expressed in units of watts per kilogram (W/kg).
The FCC requires wireless phones to comply with a
safety limit of 1.6 watts per kilogram (1.6 W/kg). The
FCC exposure limit incorporates a substantial margin
of safety to give additional protection to the public and
to account for any variations in measurements.
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power levels
so as to use only the power required to reach the
network. In general, the closer you are to a wireless
base station antenna, the lower the power output.
NorthAmerica_Cingular_T-mobile.fm Page 89 Wednesday, February 22, 2006 9:32 PM
The highest SAR values for this model phone as
reported to the FCC are Head: 0.300 W/Kg, Bodyworn: 0.914 W/Kg.
For body worn operation, this model phone has been
tested and meets the FCC RF exposure guidelines
whenused with a Samsung accessory designated for
this product or when used with an accessory that
contains no metal and that positions the handset a
minimum of 1.5 cm from the body.
SAR information on this and other model phones can
be viewed on-line at www.fcc.gov/oet/fccid. This site
uses the phone FCC ID number, A3LSGHE370.
Sometimes it may be necessary to remove the battery
pack to find the number. Once you have the FCC ID
number for a particular phone, follow the instructions
on the website and it should provide values for typical
or maximum SAR for a particular phone. Additional
product specific SAR information can also be obtained
at www.fcc.gov/cgb/sar.
Health and safety information
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that
it does not exceed the exposure limit established by
the FCC. Tests for each model phone are performed in
positions and locations (e.g. at the ear and worn on
the body) as required by the FCC.
Non-compliance with the above restrictions may result
in violation of FCC RF exposure guidelines.
89
NorthAmerica_Cingular_T-mobile.fm Page 90 Wednesday, February 22, 2006 9:32 PM
Health and safety information
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
from wireless phones. The FDA publication includes
the following information:
What kinds of phones are the subject of this
update?
The term wireless phone refers here to hand-held
wireless phones with built-in antennas, often called
“cell,” “mobile,” or “PCS” phones. These types of
wireless phones can expose the user to measurable
radio frequency energy (RF) because of the short
distance between the phone and the user's head.
These RF exposures are limited by Federal
Communications Commission safety guidelines that
were developed with the advice of FDA and other
federal health and safety agencies. When the phone is
located at greater distances from the user, the
exposure to RF is drastically lower because a person's
RF exposure decreases rapidly with increasing
distance from the source. The so-called “cordless
90
phones,” which have a base unit connected to the
telephone wiring in a house, typically operate at far
lower power levels, and thus produce RF exposures
well within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that
any health problems are associated with using
wireless phones. There is no proof, however, that
wireless phones are absolutely safe. Wireless phones
emit low levels of radio frequency energy (RF) in the
microwave range while being used. They also emit
very low levels of RF when in the stand-by mode.
Whereas high levels of RF can produce health effects
(by heating tissue), exposure to low level RF that does
not produce heating effects causes no known adverse
health effects. Many studies of low level RF exposures
have not found any biological effects. Some studies
have suggested that some biological effects may
occur, but such findings have not been confirmed by
additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
NorthAmerica_Cingular_T-mobile.fm Page 91 Wednesday, February 22, 2006 9:32 PM
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
• “Support needed research into possible biological
effects of RF of the type emitted by wireless
phones;
• “Design wireless phones in a way that minimizes
any RF exposure to the user that is not necessary
for device function; and
•
“Cooperate in providing users of wireless phones
with the best possible information on possible
effects of wireless phone use on human health.
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at
the federal level. The following agencies belong to this
working group:
• “National Institute for Occupational Safety and
Health
• “Environmental Protection Agency
• “Federal Communications Commission
• “Occupational Safety and Health Administration
• “National Telecommunications and Information
Administration
Health and safety information
What is FDA's role concerning the safety of
wireless phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new
drugs or medical devices. However, the agency has
authority to take action if wireless phones are shown
to emit radio frequency energy (RF) at a level that is
hazardous to the user. In such a case, FDA could
require the manufacturers of wireless phones to notify
users of the health hazard and to repair, replace or
recall the phones so that the hazard no longer exists.
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF
91
NorthAmerica_Cingular_T-mobile.fm Page 92 Wednesday, February 22, 2006 9:32 PM
Health and safety information
exposure. FCC relies on FDA and other health agencies
for safety questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from
these base stations are typically thousands of times
lower than those they can get from wireless phones.
Base stations are thus not the primary subject of the
safety questions discussed in this document.
What are the results of the research done
already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radio frequency energy
(RF) exposures characteristic of wireless phones have
yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies,
however, have suggested that low levels of RF could
accelerate the development of cancer in laboratory
92
animals. However, many of the studies that showed
increased tumor development used animals that had
been genetically engineered or treated with cancercausing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies
exposed the animals to RF for up to 22 hours per day.
These conditions are not similar to the conditions
under which people use wireless phones, so we don't
know with certainty what the results of such studies
mean for human health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use
of wireless phones and primary brain cancer, glioma,
meningioma, or acoustic neuroma, tumors of the brain
or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
However, none of the studies can answer questions
about long-term exposures, since the average period
of phone use in these studies was around three years.
NorthAmerica_Cingular_T-mobile.fm Page 93 Wednesday, February 22, 2006 9:32 PM
What is FDA doing to find out more about the
possible health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
Health and safety information
What research is needed to decide whether RF
exposure from wireless phones poses a health
risk?
A combination of laboratory studies and
epidemiological studies of people actually using
wireless phones would provide some of the data that
are needed. Lifetime animal exposure studies could be
completed in a few years. However, very large
numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one
exists. Epidemiological studies can provide data that is
directly applicable to human populations, but ten or
more years' follow-up may be needed to provide
answers about some health effects, such as cancer.
This is because the interval between the time of
exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many
years. The interpretation of epidemiological studies is
hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones.
Many factors affect this measurement, such as the
angle at which the phone is held, or which model of
phone is used.
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields
(EMF) Project since its inception in 1996. An influential
result of this work has been the development of a
detailed agenda of research needs that has driven the
establishment of new research programs around the
world. The Project has also helped develop a series of
public information documents on EMF issues.
FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative
Research and Development Agreement (CRADA) to do
research on wireless phone safety. FDA provides the
scientific oversight, obtaining input from experts in
government, industry, and academic organizations.
CTIA-funded research is conducted through contracts
93
NorthAmerica_Cingular_T-mobile.fm Page 94 Wednesday, February 22, 2006 9:32 PM
Health and safety information
to independent investigators. The initial research will
include both laboratory studies and studies of wireless
phone users. The CRADA will also include a broad
assessment of additional research needs in the
context of the latest research developments around
the world.
What steps can I take to reduce my exposure
to radio frequency energy from my wireless
phone?
If there is a risk from these products - and at this
point we do not know that there is - it is probably very
small. But if you are concerned about avoiding even
potential risks, you can take a few simple steps to
minimize your exposure to radio frequency energy
(RF). Since time is a key factor in how much exposure
a person receives, reducing the amount of time spent
using a wireless phone will reduce RF exposure.
• “If you must conduct extended conversations by
wireless phone every day, you could place more
distance between your body and the source of the
RF, since the exposure level drops off dramatically
with distance. For example, you could use a
94
headset and carry the wireless phone away from
your body or use a wireless phone connected to a
remote antenna.
Again, the scientific data do not demonstrate that
wireless phones are harmful. But if you are concerned
about the RF exposure from these products, you can
use measures like those described above to reduce
your RF exposure from wireless phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to
users of wireless phones, including children and
teenagers. If you want to take steps to lower exposure
to radio frequency energy (RF), the measures
described above would apply to children and
teenagers using wireless phones. Reducing the time of
wireless phone use and increasing the distance
between the user and the RF source will reduce RF
exposure.
Some groups sponsored by other national
governments have advised that children be
discouraged from using wireless phones at all. For
NorthAmerica_Cingular_T-mobile.fm Page 95 Wednesday, February 22, 2006 9:32 PM
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free
kits can be used with wireless phones for convenience
and comfort. These systems reduce the absorption of
RF energy in the head because the phone, which is the
source of the RF emissions, will not be placed against
the head. On the other hand, if the phone is mounted
against the waist or other part of the body during use,
then that part of the body will absorb more RF energy.
Wireless phones marketed in the U.S. are required to
meet safety requirements regardless of whether they
are used against the head or against the body. Either
configuration should result in compliance with the
safety limit.
Do wireless phone accessories that claim to
shield the head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that accessories that claim to shield the head
from those emissions reduce risks. Some products
that claim to shield the user from RF absorption use
special phone cases, while others involve nothing
more than a metallic accessory attached to the phone.
Studies have shown that these products generally do
not work as advertised. Unlike “hand-free” kits, these
so-called “shields” may interfere with proper operation
of the phone. The phone may be forced to boost its
power to compensate, leading to an increase in RF
absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold
devices that claimed to protect wireless phone users
from radiation with making false and unsubstantiated
Health and safety information
example, the government in the United Kingdom
distributed leaflets containing such a recommendation
in December 2000. They noted that no evidence exists
that using a wireless phone causes brain tumors or
other ill effects. Their recommendation to limit
wireless phone use by children was strictly
precautionary; it was not based on scientific evidence
that any health hazard exists.
95
NorthAmerica_Cingular_T-mobile.fm Page 96 Wednesday, February 22, 2006 9:32 PM
Health and safety information
claims. According to FTC, these defendants lacked a
reasonable basis to substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted
cardiac pacemakers and defibrillators from wireless
telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of
Medical instrumentation (AAMI). The final draft, a joint
effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This
standard will allow manufacturers to ensure that
cardiac pacemakers and defibrillators are safe from
wireless phone EMI. FDA has tested wireless phones
and helped develop a voluntary standard sponsored by
the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and
performance requirements for hearing aids and
wireless phones so that no interference occurs when a
96
person uses a compatible phone and a compatible
hearing aid at the same time. This standard was
approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones
for possible interactions with other medical devices.
Should harmful interference be found to occur, FDA
will conduct testing to assess the interference and
work to resolve the problem.
Additional information on the safety of RF exposures
from various sources can be obtained from the
following organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's
(OSHA):
http://www.osha.gov/SLTC/
radiofrequencyradiation/index.html
NorthAmerica_Cingular_T-mobile.fm Page 97 Wednesday, February 22, 2006 9:32 PM
•
•
•
•
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime.
But an important responsibility accompanies the
benefits of wireless phones, one that every user must
uphold.
Health and safety information
•
National institute for Occupational Safety and
Health (NIOSH):
http://www.cdc.gov/niosh/emfpg.html
World health Organization (WHO):
http://www.who.int/peh-emf/
International Commission on Non-Ionizing
Radiation Protection:
http://www.icnirp.de
National Radiation Protection Board (UK):
http://www.nrpb.org.uk
Updated 4/3/2002: US food and Drug
Administration
http://www.fda.gov/cellphones
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features,
such as speed dial and redial. If available, these
features help you to place your call without taking
your attention off the road.
2. When available, use a hands-free device. If
possible, add an additional layer of convenience
and safety to your wireless phone with one of the
many hands free accessories available today.
97
NorthAmerica_Cingular_T-mobile.fm Page 98 Wednesday, February 22, 2006 9:32 PM
Health and safety information
3. Position your wireless phone within easy reach. Be
able to access your wireless phone without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your
voice mail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain,
sleet, snow, ice and even heavy traffic can be
hazardous.
5. Do not take notes or look up phone numbers while
driving. Jotting down a “to do” list or flipping
through your address book takes attention away
from your primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car
will be stationary. If you need to make a call while
moving, dial only a few numbers, check the road
and your mirrors, then continue.
98
7. Do not engage in stressful or emotional
conversations that may be distracting. Make
people you are talking with aware you are driving
and suspend conversations that have the potential
to divert your attention from the road.
8. Use your wireless phone to call for help. Dial 9-1-1
or other local emergency number in the case of
fire, traffic accident or medical emergencies.
Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. If you see an auto accident, crime in
progress or other serious emergency where lives
are in danger, call 9-1-1 or other local emergency
number, as you would want others to do for you.
10. Call roadside assistance or a special nonemergency wireless assistance number when
necessary. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal, a
minor traffic accident where no one appears
injured, or a vehicle you know to be stolen, call
roadside assistance or other special nonemergency number.
NorthAmerica_Cingular_T-mobile.fm Page 99 Wednesday, February 22, 2006 9:32 PM
Using Your Phone Near Other Electronic
Devices
For more information, please call 1-888-901-SAFE, or
visit our web-site www.wow-com.com
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against the
RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
Provided by the Cellular Telecommunications &
Internet Association
Operating Environment
Remember to follow any special regulations in force in
any area and always switch your phone off whenever it
is forbidden to use it, or when it may cause
interference or danger. When connecting the phone or
any accessory to another device, read its user's guide
for detailed safety instructions. Do not connect
incompatible products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation of
the equipment and for the safety of personnel, it is
recommended that the equipment should only be used
in the normal operating position (held to your ear with
the antenna pointing over your shoulder).
Health and safety information
“The wireless industry reminds you to use your
phone safely when driving.”
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be maintained
between a wireless phone and a pacemaker to avoid
potential interference with the pacemaker.
These recommendations are consistent with the
independent research and recommendations of
Wireless Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone is
switched on.
• should not carry the phone in a breast pocket.
99
NorthAmerica_Cingular_T-mobile.fm Page 100 Wednesday, February 22, 2006 9:32 PM
Health and safety information
•
should use the ear opposite the pacemaker to
minimize potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you
may wish to consult your hearing aid manufacturer to
discuss alternatives.
Other Medical Devices
If you use any other personal medical devices, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information. Switch your phone off in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to
external RF energy.
100
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted
notices require you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
NorthAmerica_Cingular_T-mobile.fm Page 101 Wednesday, February 22, 2006 9:32 PM
areas), chemical plants or where blasting operations
are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas (such
as propane or butane), areas where the air contains
chemicals or particles, such as grain, dust or metal
powders, and any other area where you would
normally be advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well as
user programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should
never rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not be
possible on all wireless phone networks or when
certain network services and/or phone features are in
use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 911 or other official
emergency number). Emergency numbers vary by
location.
3. Press
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular service
provider.
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut
off the call until given permission to do so.
101
NorthAmerica_Cingular_T-mobile.fm Page 102 Wednesday, February 22, 2006 9:32 PM
Health and safety information
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed
to play with it because they could hurt themselves and
others, damage the phone or make calls that increase
your phone bill.
Vehicles using liquefied petroleum gas (such as
propane or butane) must comply with the National Fire
Protection Standard (NFPA-58). For a copy of this
standard, contact the National Fire Protection
Association, One Battery march Park, Quincy, MA
02269, Attn: Publication Sales Division.
FCC Notice and Cautions
Cautions
Changes or modifications made in the radio phone, not
expressly approved by Samsung, will void the user’s
authority to operate the equipment.
FCC Notice
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
The phone may cause TV or radio interference if used
in close proximity to receiving equipment. The FCC
can require you to stop using the phone if such
interference cannot be eliminated.
102
Only use approved batteries, antennas and chargers.
The use of any unauthorized accessories may be
dangerous and void the phone warranty if said
accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex
piece of equipment and can be broken. Avoid
dropping, hitting, bending or sitting on it.
NorthAmerica_Cingular_T-mobile.fm Page 103 Wednesday, February 22, 2006 9:32 PM
Other Important Safety Information
Product Performance
•
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends
on the signal strength in your area. Your phone
informs you of the current signal strength by
displaying a number of bars next to the signal strength
icon. The more bars displayed, the stronger the signal.
•
•
•
•
•
Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty installation
or service may be dangerous and may invalidate
any warranty applicable to the device.
Check regularly that all wireless phone equipment
in your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
Switch your phone off before boarding an aircraft.
The use of wireless phone in aircraft is illegal and
may be dangerous to the aircraft's operation.
Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
If you're inside a building, being near a window may
give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15
minutes of searching, a Power Save feature is
automatically activated. If your phone is active, it
periodically rechecks service availability or you can
check it yourself by pressing any key.
Anytime the Power Save feature is activated, a
message displays on the screen. When a signal is
found, your phone returns to standby mode.
103
NorthAmerica_Cingular_T-mobile.fm Page 104 Wednesday, February 22, 2006 9:32 PM
Health and safety information
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and
receiver. When it's turned on, it receives and transmits
radio frequency (RF) signals. When you use your
phone, the system handling your call controls the
power level. This power can range from 0.006 watts to
0.2 watts in digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and accessories.
Faulty service may void the warranty.
There are several simple guidelines to operating your
phone properly and maintaining safe, satisfactory
service.
• Hold the phone with the antenna raised, fullyextended and over your shoulder.
• Try not to hold, bend or twist the phone's antenna.
• Don't use the phone if the antenna is damaged.
• Speak directly into the phone's receiver.
104
•
Avoid exposing your phone and accessories to rain
or liquid spills. If your phone does get wet,
immediately turn the power off and remove the
battery. If it is inoperable, call Customer Care for
service.
Availability of Various Features/Ring
Tones
Many services and features are network dependent
and may require additional subscription and/or usage
charges. Not all features are available for purchase or
use in all areas. Downloadable Ring Tones may be
available at an additional cost. Other conditions and
restrictions may apply. See your service provider for
additional information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone
usage patterns and conditions. Battery power
consumption depends on factors such as network
configuration, signal strength, operating temperature,
features selected, frequency of calls, and voice, data,
and other application usage patterns.
NorthAmerica_Cingular_T-mobile.fm Page 105 Wednesday, February 22, 2006 9:32 PM
Battery Precautions
•
•
•
•
•
•
•
disconnect it from the power source. Do not leave
the battery connected to a charger for more than a
week, since overcharging may shorten its life.
Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and lifetime of the battery.
Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between the
+ and - terminals of the battery (metal strips on
the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the
terminals may damage the battery or the object
causing the short-circuiting.
Health and safety information
•
•
Never use any charger or battery that is damaged
in any way.
Use the battery only for its intended purpose.
If you use the phone near the network's base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
Battery charging time depends on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time
to buy a new battery.
If left unused, a fully charged battery will
discharge itself over time.
Use only Samsung-approved batteries and
recharge your battery only with Samsungapproved chargers. When a charger is not in use,
105
NorthAmerica_Cingular_T-mobile.fm Page 106 Wednesday, February 22, 2006 9:32 PM
Health and safety information
•
Dispose of used batteries in accordance with local
regulations. In some areas, the disposal of
batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion
batteries, contact your nearest Samsung
authorized service center. Always recycle. Do not
dispose of batteries in a fire.
•
•
•
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Keep the phone and all its parts and accessories
out of the reach of small children.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode electronic
circuits.
106
•
•
•
Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
Do not use or store the phone in dusty, dirty areas,
as its moving parts may be damaged.
Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit
boards.
Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with
a soft cloth slightly dampened in a mild soap-andwater solution.
NorthAmerica_Cingular_T-mobile.fm Page 107 Wednesday, February 22, 2006 9:32 PM
•
•
•
•
•
Use only the supplied or an approved replacement
antenna. Unauthorized antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
Health and safety information
•
Do not paint the phone. Paint can clog the device's
moving parts and prevent proper operation.
Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
When the phone or battery gets wet, the label
indicating water damage inside the phone changes
color. In this case, phone repairs are no longer
guaranteed by the manufacturer's warranty, even
if the warranty for your phone has not expired.
If your phone has a flash or light, do not use it too
close to the eyes of people or animals. This may
cause damage to their eyes.
107
Index
ABC mode, text input • 23
Alarm • 40
Answering
call • 26
second call • 28
Anykey answer • 76
Auto redial • 76
Background image • 76
Backlight time, set • 77
Band selection • 81
Barring, calls • 80
Battery
charging • 7
low indicator • 8
precautions • 89
Bluetooth
receiving, data • 84
sending, data • 83
settings • 82
Broadcast messages • 60
Browser, web • 42
108
Calculator • 40
Calendar • 65
Call costs • 31
Call records
dialled • 30
missed • 30
received • 30
Caller group • 33
Caller ID • 81
Calls
answering • 26
barring • 80
diverting • 79
holding • 27
making • 25
redialling • 25
rejecting • 26
transferring • 28
waiting • 80
Camera
photos • 69
videos • 71
CB (Cell Broadcast) messages •
60
Characters, enter • 23
Connection tone • 78
Converter • 41
Creating messages
e-mail • 47
MMS • 46
SMS • 45
Date, set • 74
Deleting
calendar item • 68
call records • 30
e-mail • 51, 53
MMS • 50, 51
Phonebook • 32, 35
SMS • 49, 51
Dialled calls • 30
Display
backlight, set • 79
brightness • 77
icons • 10
language • 74
layout • 10
settings • 76
Diverting, calls • 79
DTMF tones, send • 28
E-mails
creating/sending • 47
deleting • 53
setting • 57
viewing • 52
Emergency calls • 92
FDN (Fixed Dial Number) mode
• 85
File manager • 61
Games • 38
Greeting message • 74
Health and safety • 88
Holding, call • 27
Icons, description • 10
Images, downloaded • 61
Inbox, messages
e-mail • 52
SMS/MMS • 48
International calls • 25
Internet • 42
Keypad tones
sending/muting • 28
setting • 78
volume • 78
Language, select • 74
Last number, redial • 25
Locking
media contents • 85
menu functions • 85
phone • 84
SIM card • 85
Low battery indicator • 8
Memory status
downloaded items • 65
phone • 85
Phonebook • 35
Message tone • 78
Messages
e-mail • 47, 52
greeting • 74
MMS • 46, 49
SMS • 45, 49
Minute minder • 78
Missed alarm items • 68
Missed calls
call record • 30
caller ID, set • 77
MMS messages
creating/sending • 46
setting • 55
viewing • 48
Multiparty-call • 28
Music player • 35
Music, downloaded • 63
Name card • 34
Names
entering • 23
searching • 31
Network band, select • 81
Network selection • 80
Network services • 79
Outbox, messages • 51
Password
call barring • 80
phone • 84
Phone
care and maintenance •
93
display • 10
icons • 10
locking • 84
password • 84
resetting • 85
switching on/off • 8
unpacking • 6
Phonebook
adding • 32
copying • 32
deleting • 35
editing • 32
finding • 31
managing • 35
options • 32
speed-dialling • 34
Photos
taking • 69
viewing • 61
PIN, change • 84
PIN2, change • 85
Power on/off tone • 78
Privacy • 85
Problems, solve • 86
Received calls • 30
Received message
e-mail • 52
SMS/MMS • 48
Recording
videos • 71
voice memos • 37
Redialling
automatically • 76
manually • 25
Resetting phone • 85
Ringer
incoming calls • 77
messages • 78
Road safety • 90
109
Index
Roaming • 80
110
Text input mode, change • 23
Text, enter • 23
Time, set • 74
Timer • 41
Videos
recording • 71
Voice clarity • 28, 76
Voice memos
playing • 37
recording • 37
Waiting call • 80
Wallpaper • 76
Web browser
access • 42
cache, clear • 44
World time • 39
Index
Safety
information • 88
precautions • 1
SDN (Service Dialling
Numbers) • 35
Security, calls • 84
Sent messages • 51
SIM card
inserting • 7
locking • 85
Slide tone • 78
SMS messages
creating/sending • 45
deleting • 49
setting • 54
viewing • 48
Sound settings • 77
Sounds, downloaded • 64
Speakerphone feature • 27
Speed-dial • 34
Stopwatch • 42
Switching on/off
microphone • 28
phone • 8

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Modify Date                     : 2006:03:08 16:24:34-05:00
Create Date                     : 2006:03:08 16:24:04-05:00
Metadata Date                   : 2006:03:08 16:24:34-05:00
Format                          : application/pdf
Document ID                     : uuid:8d375bee-cc47-42f4-8de0-b0623052598c
Instance ID                     : uuid:53ee9b4a-fd98-481f-92e6-edfa08c03b30
Producer                        : Acrobat Distiller 5.0 (Windows)
Has XFA                         : No
Page Count                      : 113

EXIF Metadata provided by EXIF.tools

Samsung Electronics Co SGHE370 Single-Band PCS GSM/ EDGE Phone with Bluetooth User Manual

Samsung Electronics Co Ltd Single-Band PCS GSM/ EDGE Phone with Bluetooth Users Manual

Users Manual

FCC ID Filing: A3LSGHE370

Navigation menu

Namespaces

Views

Navigation