Samsung Electronics Co SGHE820N Single-Band PCS GSM Phone User Manual

Samsung Electronics Co Ltd Single-Band PCS GSM Phone Users Manual

Users Manual

World Wide Webhttp://www.samsungmobile.comPrinted in KoreaCode No.: GH68-05273AEnglish. 11/2004. Rev. 1.0ELECTRONICS* Some of the contents in this manual may differ from your phone, depending on the software installed or your service provider.GPRS TELEPHONESGH-E820P
23ContentsImportant safety precautions ...................... 7Special features ........................................... 9Unpacking .................................................. 13Your phone ................................................ 14Phone layout...................................................... 14Display.............................................................. 17Backlight ........................................................... 20Service display................................................... 20Camera............................................................. 20Built-in antenna ................................................. 21Getting started........................................... 22Inserting/Removing the SIM card ......................... 22Installing/Removing/Charging the battery.............. 23Switching the phone on or off............................... 27Selecting functions and options ............................ 28Locking or unlocking the keypad........................... 30Call functions ............................................. 31Making a call...................................................... 31Ending a call ...................................................... 34Answering a call ................................................. 35Rejecting a call................................................... 35Adjusting the volume .......................................... 35Accessing options during a call ............................. 36Using the ear-microphone.................................... 45Using the Push to talk service .............................. 46Entering text .............................................. 48Changing the text input mode .............................. 49Using the T9 mode ............................................. 50Using the ABC mode ........................................... 52Using the symbolic mode..................................... 55Using the number mode ...................................... 55Using the menus ........................................ 56Accessing a menu function................................... 56
Contents4List of menu functions ......................................... 57Phonebook menu ....................................... 63Find name ......................................................... 63Add entry .......................................................... 66Speed list ......................................................... 67Copy all to phone ............................................... 69Send all via infrared............................................ 70Delete all........................................................... 72Own number...................................................... 73Group setting..................................................... 74Memory status ................................................... 75Service directory ................................................ 75Push To Talk(PTT) ................................... 76Login to service / Logout from PTT........................ 78Callback inbox.................................................... 78Contact list ........................................................ 79Group list .......................................................... 80Add group ......................................................... 81Settings ............................................................ 84PTT call records ................................................ 86Call records ................................................ 90Missed calls ....................................................... 90Received calls .................................................... 90Dialled calls ...................................................... 91Delete all........................................................... 91Call time ........................................................... 92Call costs .......................................................... 92Network services ....................................... 94Call diverting ..................................................... 94Call barring........................................................ 96Call waiting........................................................ 99Network selection ............................................. 100Caller ID ......................................................... 101Active line ....................................................... 101Sound settings ......................................... 102Incoming calls.................................................. 102Messages ........................................................ 103Contents5Push to talk .................................................... 104Power on/off .................................................... 105Connection tone ............................................... 105Key tone ......................................................... 106Minute minder.................................................. 106Quiet mode...................................................... 106Slider tone....................................................... 107Alerts on call.................................................... 107Messages ................................................. 108Short messages ............................................... 108Multimedia messages ........................................ 114Push messages ................................................ 126Preset messages .............................................. 127Voice mail ....................................................... 127Broadcast ........................................................ 128Settings .......................................................... 130Memory status ................................................ 133Fun box .................................................... 134WWW services ................................................. 134Media box........................................................ 140JAVA world ...................................................... 144SIM-AT MENU (SIM Application Toolkit) ............... 148Organiser ................................................. 149New memo ...................................................... 149Calendar ......................................................... 151To do list......................................................... 154Clock .............................................................. 155Alarm ............................................................. 157Calculator........................................................ 159Conversion ...................................................... 160Timer.............................................................. 161Stopwatch ....................................................... 162Camera .................................................... 163Take photos..................................................... 163My photos ....................................................... 169My albums....................................................... 169Delete all......................................................... 170Settings ......................................................... 170Memory status ................................................. 171
Contents6Phone settings ......................................... 172Display............................................................ 172Greeting message............................................. 174Security .......................................................... 175Auto redial....................................................... 178Voiceclarity ..................................................... 178Slide down operation ....................................... 179Active slide ...................................................... 179Anykey answer................................................. 179Fax mode ........................................................ 180Infrared activation ............................................ 180Reset settings .................................................. 181Using ALS (Alternate Line Service) .......... 182Solving problems ..................................... 184Access codes ............................................ 187Phone password ............................................... 187PIN................................................................. 187PIN2 ............................................................... 188PUK ................................................................ 188PUK2 .............................................................. 188Call barring password........................................ 189Health and safety information.................. 190SAR certification information .............................. 190Precautions when using batteries........................ 194Road safety ..................................................... 195Operating environment ..................................... 198Electronic devices............................................. 198Potentially explosive atmospheres....................... 200Emergency calls ............................................... 201Other important safety information..................... 202Care and maintenance ...................................... 203Glossary................................................... 224Index....................................................... 228Quick reference card................................ 237
7Important safety precautionsRead these guidelines before using your wireless phone. Failure to comply with them may be dangerous or illegal.Road safety at all timesDo not use a hand-held phone while driving; park the vehicle first.Switching off when refuellingDo not use the phone at a refuelling point (service station) or near fuels or chemicals.Switching off in aircraftWireless phones can cause interference. Using them in aircraft is both illegal and dangerous.Switching off near all medical equipmentSwitch off your phone near the medical equipment. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Follow any regulations or rules in force.InterferenceAll wireless phones may be subject to interference, which could affect their performance.Special regulationsMeet any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger (in a hospital for example).Water resistanceYour phone is not water-resistant. Keep it dry.
Important safety precautions8Sensible useUse only in the normal position (held to the ear). Avoid unnecessary contact with the antenna when the phone is switched on, especially the phone is in service.Emergency callKey in the emergency number for your present location, then press the key. Give all the necessary information as accurately as possible. Do not cut off the call until given permission to do so.Keeping small children away from your phoneKeep the phone and all its parts including accessories out of the reach of small children.Accessories and batteriesUse only Samsung-approved accessories and batteries. Qualified serviceOnly qualified service personnel may install or repair your phone.For more detailed safety information, see “Health and safety information” on page 190.CAUTIONRISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPEDISPOSE USED BATTERIES ACCORDING TO THE INSTRUCTIONS9Special featuresCompact & Stylish slide-up design Samsung E820 is an amazing phone with a refined slide design, which fits comfortably in your hand. The semi-automatic slide allows you to open the phone quietly, smoothly and with very little effort. VGA camera with flash (see page 163) With the built-in VGA Camera, the Samsung E820 allows you to shoot the clearest of images, anytime, anywhere. Take a close look at another advanced technology masterpiece created by Samsung. Speaker phone (see page 36)The integrated speakerphone incorporates a state-of-the-art echo cancellation technology and incorporates both noise cancellation and voice clarity functions to let you speak more freely in the car. They'll always be able to hear you loud and clear.
Special features10Background noise sensitivity You can talk in the midst of a crowd and the phone will automatically increase the volume and clarity of the incoming call to make it more audible.Even better than simply raising the volume on your phone, the E820 automatically senses the volume around you to enhance your conversation and keep you from having to run out of the room. 64 poly ringtones (see page 102)64 Polyphonic ringtones will make your calls ring through with unmistakable clarity and great sound to boot. This best in the market sound will make the difference between you and the rest all the more audible. Special features11Get personal with photo caller ID ( see page 141,166)Now you can see who's calling you by his or her very own photo. With the image saved in your phone, you can view the image of the person calling you, before you answer the call. The Samsung E820’s Photo Caller ID function provides you with the convenience of using your picture files in ways that are impossible with other mobile phones. Step up to the latest and greatest in convenience with the E820. 65,536 color TFT LCD As usual, Samsung leads the way in mobile display quality. The display of the E820 will astounded you with its vivid colors and distinctive class. With its 65,536 color TFT screen the quality of the VGA pictures will come out in true force. The screen of the display lets the message come through in vivid life and lets you view your multimedia messages in bright delight.
Special features12MMS (see page 114)Just shoot it and send it along with Samsungs Multimedia solution, MMS. Multimedia Messaging Service was developed from SMS and makes it possible to send message with a combination of text, voice, music, and images to other MMS capable mobile phones. Make multimedia communication your message to the world as you discover a new way to tell your story.JAVA (see page 144)Make your free time more relaxing with a bit of mobile entertainment.The Samsung E820s JavaTM‚ based games bring the challenges to you. Enjoy the embedded games and download new JavaTM‚ based games for more amusement. The JavaTM‚ capabilities allow you to download programs from wide variety of JavaTM‚ applications - more than just games. 13UnpackingYour package contains the following items:In addition, you can obtain the following accessories for your phone from your local Samsung dealer:• Advanced handsfree car kit • Simple handsfree car kit • PC data link kit •HeadsetNote: The items supplied with your phone and available accessories may be different, depending on your country or service provider.Phone Travel a da pterBattery Owner’s manual
14Your phonePhone layoutThe following illustrations show the main elements of your phone:EarpieceDisplaySoft key (right)WAP BrowserkeyAlphanumeric keysSoft key (left)Dial/Menuconfirmation keyMicrophoneCancel/Back/Correction keyNavigation keys(Up/Down/Left/Right)Volume keysEar-microphone jackSpecialfunction keysPower On/Off / Menu exit key IrDA portCameraPTT keyFlash(Reverse side)MirrorYour phone15h Key(s) Description (soft keys)Perform the functions indicated by the text above them, on the bottom line of the display.In Menu Mode, scroll through the menu options.In Idle Mode, the Left key enters the New SMS message writing screen, the Right key enters the Incoming call’s melody setting menu and the Down key enters the PTT group list menu. The Up key enters the Camera menu, when pressed and held it switchs the phone to the capture mode. In Idle Mode, launches the WAP (Wireless Application Protocol) browser directly.Makes or answers a call.In Idle Mode, accesses the call log list. In Menu Mode, selects a menu function or stores information that you have entered, such as a name in the phone or SIM memory.Deletes characters from the display.When pressed and held in Idle Mode, quickly accesses the New memo screen.In Menu Mode, returns to previous menu.
Your phone16Ends a call. When pressed and held, switches the phone on or off. In Menu Mode, cancells your input and returns to Idle Mode. When pressed and held in Idle Mode, quickly accesses your voice mail server.Enter numbers, letters and some special characters.Used for various purposes in different functions.When pressed and held while entering a phone number, the key enters a pause.When pressed and held in Idle Mode, the key enters or exits the Quiet Mode.(on the left side of the phone) During a call, adjust the earpiece volume.In Idle Mode, adjust the key tone volume. In the capture mode, flip the picture vertically by pressing the volume up key and horizontally by pressing the volume down key. Key(s) Description (continued)Your phone17DisplayDisplay layoutThe display has three areas:(on the right side of the phone) Press the PTT key once and everyone can hear you talk - release the key and hear others talking back to you.Area DescriptionFirst line Displays various icons. See page 18.Middle lines Display messages, instructions and any information that you enter, such as number to be dialled.Last line Shows the functions currently assigned to the two soft keys. Key(s) Description (continued)Menu PhonebookIcons Tex t and graphic areaSoft keys Indications
Your phone18IconsIcon Description Shows the received signal strength. The more the number of bars, the stronger the signal.Appears when a call is in progress. Appears when you are out of a service area. When it displays, you cannot make or receive calls.Appears when you have new or unchecked voice messages. When your SIM card supports ALS (Alternate Line Service), this icon may appears like , , . Appears when you have new or unread messages.Appears when you have new or unchecked multimedia messages.Appears when you are retrieving a multimedia message.Appears when you are sending a multimedia message.Appears when you set the alarms to ring at a specified time.Appears when the IrDA port is active. For details, see page 180.Appears when you connect the phone to the computer by the IrDA port.Your phone19Appears when you are connected to the GPRS network.Appears when the PTT service is available.Appears when trying to login to the PTT service.Appears when the PTT service is unable to use temporarily.Appears when your SIM card supports the Call diverting status indication and the Call diverting feature is activated. When your SIM card supports ALS (Alternate Line Service), this icon may appears with the number 1, 2, or both. For example: , , . Appears when you are at the home zone. (May be shown only if your service provider supports this feature)Appears when you are at the office zone. (May be shown only if your service provider supports this feature)Appears when you set the alert type for incoming calls to Vibration or Vibration then melody. For further details, see page 103.Appears when the Quiet Mode is active.Shows the level of your battery. The more bars you see, the more power you have left.Icon Description (continued)
Your phone20Backlight The display and the keypad are illuminated by a backlight. When you press any key, the backlight illuminates. It turns off if you don’t press any key within a given period of time, depending on the Backlight menu option. For further details, see page 173.Service displayThe service display works when the LCD turns off and you are in a service area. The service light’s activity depends on the Service display menu option. See page 173.CameraThe camera embedded in your phone allows you to take a picture of people or events while on the move.For further details about using the Camera feature, see page 163.(Reverse side)Your phone21Built-in antennaYour phone has a built-in antenna. As with other mobile radio transmitting equipment, do not touch the antenna unnecessarily when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than needed.
22Getting startedInserting/Removing the SIM cardWhen you subscribe to a cellular network, you are provided with a SIM card loaded with your subscription details, such as your PIN, any optional services available and so on.• Keep all miniature SIM cards out of the reach of small children.• The SIM card and its data can be easily damaged by scratches or bending, so be careful when handling, inserting or removing the card.• When installing the SIM card, always make sure that the phone is switched off before you remove the battery.Inserting the SIM card1. If necessary, remove the battery by referring to page 24.2. Insert and slide the SIM card under the tab, ensuring that the notched corner is top left and the gold contacts of the card face into the phone.Getting started23Removing the SIM cardTo remove the SIM card, slide the card out of the holder, as shown.Installing/Removing/Charging the batteryYour phone is powered by a rechargeable Li-ion battery. Use only approved batteries and chargers. Ask your local Samsung dealer for further details.Note: You must fully charge the battery before using your phone for the first time. A discharged standard battery is fully recharged in approximately 150 minutes.Installing the battery1. Insert the teeth on the bottom of the battery into the corresponding slots on the phone..
Getting started242. Press the battery against the back of the phone until it clicks into place. Removing the battery1. Switch off the phone by pressing and holding the key.2. To remove the battery, pull the battery catch toward the top of the phone and hold it in that position. Lift the battery away from the phone.Getting started25Charging the battery by using the travel adapterNote: The phone can be used while the battery is being charged, but this causes the battery to charge more slowly.1. Plug the connector of the travel adapter into the jack at the bottom of the phone. Check that the arrow on the connector is facing towards the front of the phone.2. Plug the adapter into a standard AC wall outlet.While charging, the battery icon at the top right-hand corner of the display repeatedly fills to show that the battery is charging.
Getting started263. When charging is finished, disconnect the adapter from the power outlet and from the phone by pressing the grey tabs on both sides of the connector and pulling the connector out.Low Battery IndicatorWhen the battery is weak and only a few minutes of talk time remain, the battery sensor informs you in the following ways: an empty battery icon flashes ( ), you hear a warning tone and a message repeats at regular intervals on the display. When the battery becomes too weak for the phone to operate, it switches off automatically.Getting started27Switching the phone on or offTo switch the phone on: 1. Hold down the key until the phone switches on.2. If the phone asks for a PIN, enter the PIN and press the Ok soft key. For further details, see page 187.The phone searches for your network and the current date and time appear on the display. After finding it, you can make or receive a call.To switch the phone off: Hold down the key until the power-off animation displays.Menu PhonebookService ProviderTue 1 Jun 0412:53
Getting started28Selecting functions and optionsYour phone offers a set of functions that allow you to customise your phone. These functions are arranged in menus and sub-menus, accessed via the two soft keys marked and Each menu and sub-menu allows you to view and alter the settings of a particular function. The roles of the soft keys vary according to the current context; the labels or icons on the bottom line of the display and just above the soft keys indicate their current roles.Example:Menu PhonebookService ProviderTue 1 Jun 0412:53Press the left soft key to access the menu functions.Press the right soft key to access the Phonebook feature.Getting started29To view various functions/options available or select the one is required:1. Press the appropriate soft key.In some functions, you may be asked for a password or PIN. Enter the required code and press the Ok soft key.2.To Press theselect the:• function displayed • option highlightedSelect soft key.view the next function or highlight the next option on a listDown key.move back to the previous function or option on a listUp key.move back up one level in the structure (or Back) soft key or C key.return to Idle Mode key.
Getting started30Locking or unlocking the keypadYou can lock the soft keys, navigation keys, WAP brower key, volume keys and camera key to avoid pressing keys by accident. To lock the keys, slide the folder down. If you set the Stop operation option in the Slide down operation menu (see page 179), the phone locks the keys automatically when you slide the folder down.Otherwise, if you set the Continue operation option in the Slide down operation menu (see page 179), the confirming message appears on the display when you slide the folder down in the Idle Mode. In the message, you can lock the keys by pressing the Yes soft key. If you don't press the Yes or NO soft keys in the confirming message, the phone locks the keys after a little while.To unlock the keys, slide the folder up or press the Unlock soft key and then press the OK soft key again.31Call functionsMaking a callUsing the number keypadWhen the idle screen is displayed, enter the area code and phone number, and press the key.Note: If you have set the Auto redial option to On, the number is redialled automatically up to ten times if the person you called does not answer or the line is busy. For further details, see page 178.Correcting the numberTo clear Press thethe last digit displayedC key.any other digit in the numberNavigation keys until the cursor (|) is immediately to the right of the digit to be cleared and press the C key. You can also insert a missing digit simply by pressing the appropriate key.the all digits displayedC key and hold it down for more than one second.
Call functions32Making an international call1. Press and hold the 0 key for the international prefix. The + character appears.2. Enter the country code, area code and phone number and press the key.Making a call from phonebookYou can store the names and phone numbers called regularly in the SIM card and phone’s memory, which are jointly called the Phonebook. You then do not need to remember all your numbers; simply select the required name to recall the associated number. For further details about the Phonebook feature, see page 63.Using the call logsThe phone stores up to 20 calls dialled, received or missed chronologically. The last call is saved in the first position. If the same number occurs more than once, only the latest occurrence is saved.To recall any of these numbers:1. Press the key in Idle Mode to access the Call log list. 2. Use the Up and Down keys to scroll through the list until the number you want highlights.The call logs are listed with the following icons:• : Dialled calls• : Received calls• : Missed callsCall functions333. To dial the number, press the key.To view each call record, see “Call records” on page 90.Using the PTT call logsThe phone stores up to 20 PTT calls dialled, received or missed chronologically. The last PTT call is saved in the first position. If the same PTT call occurs more than once, only the latest occurrence is saved.To make a one-to-one call any of these records:1. Press the key in Idle Mode to access the Call log list. 2. Use the Up and Down keys to scroll through the list until the PTT call record you want highlights.The PTT call logs are listed with the following icons:• : PTT Dialled calls• : PTT Received calls• : PTT Missed calls3. To make a one-to-one call, press the PTT key.To view each PTT call record, see “PTT call records” on page 86.Viewing missed callsIf you have a subscription that includes the Caller Line Identification (CLI) feature and you are unable to answer a call for any reason, you can find out who was calling you so that you can call the person back.
Call functions34The number of missed calls displays on the idle screen immediately after a call was missed.To view the missed calls immediately:1. Press the Missed soft key. The list of the missed calls displays.2. If necessary, scroll to the number you want by pressing the Up or Down key.3. To dial the number, press the key.To use the missed call options, see “Missed calls” on page 90.Note: To clear the missed call notification on the display, press the key. When you also have voice mails, short messages or multimedia messages and multi CBs, the right soft key indication changes in the following order: Missed, Connect, View, CB and Phonebook.Speed-dialling from PhonebookOnce you have stored numbers in the Phonebook, you can dial a number simply by pressing one or two keys. For further details, see page 67.Ending a callWhen you want to finish your call, briefly press the key. Or, slide the folder down if you set the Stop operation option in the Slide down operation menu (see page 179).Call functions35Answering a callWhen somebody calls you, the phone rings and displays the incoming call animation.If the caller can be identified, the caller’s phone number, or name if stored in your Phonebook, displays. To answer a call, press the key or Accept soft key. Or, slide the folder up when the Active slide option is set to on.Note: You can answer a call while using the Phonebook or menu features. The current operation stops.Rejecting a callTo reject an incoming call, press the key. Or, slide the folder down if you set the Stop operation option in the Slide down operation menu (see page 179).Adjusting the volumeDuring a call, if you wish to adjust the earpiece volume, use the volume keys on the left side of the phone. When you hear a sound, such as ringtone, you can also adjust the earpiece volume. But it is not fixed.Note: When a call comes in, you can mute the call ringer by pressing and holding one of the volume keys.
Call functions36Accessing options during a callYour phone provides a number of control functions that you can use during a call. Using the loudspeaker You can speak and listen to the phone from a short distance without holding the phone to your ear. Turn on / off the loudspeaker1. Press the Options soft key.2. Press the Up or Down key to highlight the Speaker on (turn on the loudspeaker)/ Normal (turn off the loudspeaker) option. Press the Select soft key.CAUTIONS: Do not hold the phone near to your ear when you use the loudspeaker. Because the volume may be extremely loud.Note: You can turn on/off the loudspeaker by pressing the Right soft key during a call.Switching the microphone off (Mute)You can temporarily switch your phone’s microphone off so that the other person cannot hear you.Example: You may wish to say something to another person in the room but do not want the calling person to hear you.1. Press the Options soft key.Call functions372. When Mute highlights, press the Select soft key.The Mute icon ( ) appears on the bottom line of the display and your correspondent can no longer hear you.To switch the microphone back on:1. Press the Options soft key.2. When Unmute highlights, press the Select soft key.The Mute icon disappears and your correspondent can hear you.Searching for a number in PhonebookYou can search for a number in your Phonebook during a call.1. Press the Options soft key.2. If necessary, press the Up or Down key to highlight the Phonebook option. Press the Select soft key.3. Select the Find name option and press the Select soft key.The Phonebook entries are listed.4. Enter the first a few letters of the name that you want to find.The Phonebook entries are listed starting with the first entry matching your input.Note: You can also scroll through the Phonebook from the beginning, by pressing the Up or Down key.
Call functions385. To view the highlighted entry, press the Ok soft key.For further details about the Phonebook feature, see page 63.Muting/Sending key tonesYou can turn the key tones off or on during a call. When the Mute keys option is selected, your phone does not transmit the key tones. It allows you to press keys without hearing annoying key tones during a call.To communicate with answering machines or computerised telephone systems, the Send keys option must be selected.Sending DTMF tones You can send the DTMF(Dual Tone Multi-Frequency) tones of the number on the display during a call.This option is helpful for entering a password or account number when you call an automated system, like a banking service.To send the DTMF tones:1. When you are connected to the teleservice system, press the Options soft key.2. Press the Up or Down key to highlight the Send DTMF option. Press the Select soft key.3. Enter the number you want to send and press the OK soft key.The tones of the displayed number are sent.Call functions39Using the message serviceYou can read or write a new message during a call.1. Press the Options soft key.2. Press the Up or Down key to highlight the Message option. Press the Select soft key.3. To read a received message, select the Inbox option, and then scroll to the message that you want to read.To write a new message, select the Create option.4. Press the Select soft key.For further details about the SMS feature, see page 108.Using the voiceclarity The voiceclarity function maintains the background noise to acceptable level. You can hear the other party louder and clearer thus it is a desired feature especially in a noisy environment. You can manually turn on the voiceclarity feature while engaged in a call.Using the voiceclarity function1. Press the Options soft key.2. Press the Up or Down key to highlight the Voiceclarity on / Voiceclarity off option. Press the Select soft key.Note: You cannot activate the voiceclarity when you use the loudspeaker and the handsfree car kit.
Call functions40Using the SAT (SIM Application Toolkit)If you use a SAT card that provides additional services, the SAT menu displays. For further details, see your SIM card instructions.Putting a call on holdYou can place the current call on hold whenever you want. You can make another call while you have a call in progress if this service is supported by the network. Of these two calls, one is active and the other is on hold and you can switch between the calls.Note: You can not turn on/off the loudspeaker or voiceclarity features when you hold a call. To place a call on hold, 1. Press the Options soft key.2. Press the Up or Down key to highlight the Hold option. If you want to reactivate the call, press the Retrieve soft key.To make a call while you have a call in progress: 1. Enter the phone number that you want to dial or look it up in the Phonebook.2. Press the key to dial the second call. The first call is automatically put on hold.Or alternatively:1. Press the Options soft key.2. Put the current call on hold by selecting the Hold option.Call functions413. Make the second call in the normal way.To switch between the two calls, press the Options soft key and then select the Swap option.The current call is placed on hold and the call on hold is reactivated so that you can continue conversing with the other person.To end the call on hold, press the Options soft key and select the End held call option.When you want to finish, end each call normally by pressing the key. If you want to finish all calls at once and you set the Stop operation option in the Slide down operation menu (see page 179), slide the folder down.Answering a second callYou can answer an incoming call while you have a call in progress, if this service is supported by the network and you have activated the Call waiting option (see page 99). You will be notified of an incoming call by a call waiting tone.To answer a call while you have another call in progress:1. Press the key to answer the incoming call. The first call is automatically put on hold.2. To switch between the two calls, press the Options soft key and then select the Swap option.3. To end the call on hold, press the Options soft key and select the End held call option.To end the current call, press the key. The call on hold is continued.
Call functions42Transferring a callYou can transfer the current call to the call on hold if this service is supported by the network, so that the callers can talk to each other. You are disconnected from both of them. 1. During a call, answer or make a call in the normal way, and press the Options soft key. 2. Press the Up or Down key to select the Transfer option and press the Select soft key.The two people are connected to each other. Making a multi-party callA multi-party call feature is a network service that allows up to six people to take part simultaneously in a multi-party or conference call. For more information, contact your service provider.Setting up the multi-party call1. Call the first participant in the normal way.2. Call the second participant in the normal way. The first call is automatically put on hold.3. To join the first participant to the multi-party call, press the Options soft key and select the Join option. Press the Select soft key.4. To add a new person to the multi-party call, call the person in the normal way. Then press the Options soft key and select the Join option. Press the Select soft key.You can add incoming callers by answering the call and selecting the Join option. Repeat as needed.Call functions43Having a second call during a multi-party callTo answer a call when you have the multi-party call:1. Press the key to answer the incoming call. The first call is automatically put on hold.2. To switch between the two calls, press the Options soft key and then select the Swap option.3. To end the call on hold, press the Options soft key and select the End held multiparty option or End held call option. To end the current call, press the key. The call on hold is continued.To make a call when you have the multi-party call: See “To make a call while you have a call in progress:” on page 40.To answer an incoming call when you have the multi-party call in progress and another call on hold:1. Press the Accept soft key.2. Select the End held option to end the call on hold. Or, select the End current option to end the call in progress. And then you can answer the new call.
Call functions44Having a private conversation with one participant1. Press the Options soft key and select the Split option. Press the Select soft key.2. Press the Up or Down key to highlight a participant and press the Select soft key. Now you can talk privately with that person. The other participants can continue to converse with each other3. To return to the multi-party call, press the Options soft key and select the Join option.4. Press the Select soft key. All of the multi-party call participants can now hear each other.Removing one participant1. Press the Options soft key and select the Remove option.2. Press the Up or Down key to highlight a participant and press the Select soft key.The call ends with that participant, but you can continue to talk with the other participants.3. End the multi-party call by pressing the key.Call functions45Using the ear-microphoneWith the ear-microphone, you can make or answer a call without holding the phone. When you connect the ear-microphone to the jack at the right side of the phone, the button on the ear-microphone works as listed below: To Press redial the last call the button twice in Idle Mode.answer a call and hold the button when you receive the call.end a call and hold the button when you have finished the call.
Call functions46Using the Push to talk serviceYou can make and receive a Push to talk call. For further details about using the Push to talk feature, see page 76.Making a Push to talk callYou can make a one-to-one call or group call using the Push to talk service.Note: You first need to add PTT addresses to your Phonebook.To ma ke a one- to-o ne ca l l:1. Connect to the Push to talk service by selecting the Login to service menu.For further details about connecting to the Push to talk service, see page 78.2. Access the Contact list menu and scroll to a contact using the Up or Down key.You are connected with the selected person, if he/she logged into the service.3. When the contact you want highlights, press the PTT key.To ma ke a grou p cal l:1. Connect to the Push to talk service.For further details about connecting to the Push to talk service, see page 78.2. Access the Group list menu (Menu 5.4) and scroll to a group using the Up or Down key.Call functions473. When the group you want highlights, press the PTT key.You are connected with all of the members of the selected group, if they logged into the service.You can also make a call to the default group by pressing the PTT key while connected to the Push to talk service.Receiving a Push to talk callYou can receive a one-to-one call or group call using the Push to talk service.When you receive a one-to-one call or group call, a short tone and vibration notifies you of the call. For a one-to-one call, the phone displays information about the sender, if stored in the Contact list. If you set the 1 to 1 call menu to Notify (see page 85), the phone asks you to receive the call. Press the Accept soft key to receive the call.For a group call, the phone displays the group name and the nickname of the caller. If you press the PTT key to try to respond to a group while another member is talking, you hear a tone and “Queueing” is displayed on your phone. Press and hold the button, and wait for the other person to finish. Then you can talk.Note: When you receive PTT calls in Quiet mode, alerts for PTT calls do not sound.
48Entering textAt many times while you are using your phone, you need to enter text, such as when storing a name in the Phonebook, writing a new message, creating your personal greeting or scheduling events on your calendar.You are provided with the following text input modes:•T9 mode*This mode allows you to enter words with only one keystroke per letter. Each key on the keypad has more than one letter – when you press the 5 key once, J, K or L may be displayed. The T9 mode automatically compares your keystrokes with an internal linguistic dictionary to determine the correct word, thus requiring far fewer keystrokes than the traditional ABC mode.•ABC modeThis mode allows you to enter letters by pressing the key labelled with the required letter once, twice, three or four times until the letter displays.•Number modeThis mode allows you to enter numbers.•Symbolic modeThis mode allows you to enter special characters.* is a registered trademark of Tegic Communications, Inc. and is licensed under U.S. Patent 5,818,437/ 5,953,541/ 6,011,554.Entering text49Changing the text input modeWhen you are in a field that allows characters to beentered, you will see the text input mode indicator at the bottom of the display. Example: Entering a name in the PhonebookTo change to another text input mode:1. Press the right soft key indicating the current text input mode.2. Scroll to the mode you want to use by pressing the Up or Down key.You can use the Add word option to add new words into the T9 dictionary. See page 51.Note: If you want to exit the menu without changing the mode, press the soft key or key.3. Press the Select soft key to confirm the highlighted text input mode.Enter nameOk 16 EngText input mode indicator: T9 English mode
Entering text50Quickly changing the text input modeUsing the T9 modeTo type a word in the T9 mode:1. Start entering the word by pressing keys 2 to 9. Press each key only once for each letter.Example: To enter “hello” in the T9 mode, press the 4, 3, 5, 5, and 6 keys.The word you are typing appears on the display. It may change with each key that you press.2. Enter the whole word before editing or deleting any keystrokes.3. If the word is correct, start entering the next word. Otherwise, press the 0 key repeatedly to display alternative word choices for the keys that you have pressed.Example: Both “of” and “me” have the sequence of 6 and 3. The phone displays the most commonly used choice first.4. Insert a space between words by pressing the key.5. Continue entering the next word.To switch between the Press and hold theNumber and previous mode key.Symbol and previous mode key.ABC and T9 mode right soft key.Entering text51If Spell appears above the left soft key while you are entering text, the word does not exist in the T9 dictionary. To type words not found in the T9 mode, change the text input mode to the ABC mode, or proceed as follows:1. Press the Spell soft key, or press the right soft key and select the Add word option. 2. Enter the word you want to add using the ABC mode (see page 52) and press the Ok soft key. The word is saved in the T9 dictionary and inserted in the input field. 3. Continue entering other words in the T9 mode.Smart punctuationTo enter periods, hyphens or apostrophes, press the 1 key. The T9 mode applies rules of grammar to insert the correct punctuation. Example: The 1 key is used twice to display two punctuation marks.Changing the caseTo change the case of the next letter(s) that you type, press the key. There are three cases:• Lower Case (no indicator)• Initial Capital ( )•Capital Lock ( ) l e t ‘ s e a t .
Entering text52Inserting a spaceTo insert a space between words, press the key.Entering a number directlyTo enter a number, press and hold the number key.ScrollingTo move the cursor to the left, right, up or down within the text, press the navigation keys.Clearing letters and wordsTo clear the letter to the left of the cursor, press the C key. You can clear all of the letters on the display by pressing and holding the C key.Returning to the previous screenWhen the text input field is cleared, press and hold the C key to return to the previous screen.Using the ABC modeWhen typing in the ABC mode, press the key labelled with the required letter:- Once for the first letter- Twice for the second letter- And so onExample: To display the letter “C”, quickly press the 2 key three times. To display the letter “K”, press the 5 key twice. This method is called Multi-tap typing.Entering text53Note: The cursor moves to the right when you press a different key. When entering the same letter twice or a different letter on the same key, just press the Right key or wait a few seconds for the cursor to move to the right automatically, and then enter the next letter. Refer to the table for more information about the characters available. List of the characters available (Capital Lock mode in English)Key characters in the order displayed1 . , - ? ! ‘ @ : 1 2 A B C 23 D E F 34 G H I 45 J K L 56 M N O 67 P Q R S 78 T U V 89 W X Y Z 900
Entering text54Changing the caseTo change the case of the next letter(s) that you type, press the key. There are three cases:• Lower Case (no indicator)• Initial Capital ( )• Capital Lock ( )Inserting a spaceTo insert a space between words, press the key.Entering a number directlyTo enter a number, press and hold the number key.ScrollingTo move the cursor to the left, right, up or down within the text, press the navigation keys.Clearing letters and wordsTo clear the letter to the left of the cursor, press the C key. You can clear all of the letters on the display by pressing and holding the C key.Returning to the previous screenWhen the text input field is empty, press and hold the C key to return to the previous screen.Entering text55Using the symbolic modeThe Symbolic mode enables you to enter symbols in your text. Using the number modeThe Number mode enables you to enter numbers in your text. Press the keys corresponding to the digits you want to enter.To Press thedisplay more symbols Up or Down key.enter a symbol corresponding number key.return to the previous text input mode with entered symbol(s)Ok soft key.return to the previous text input mode without entered symbol(s) soft key.
56Using the menusThe phone offers a range of functions that allow you to tailor the phone to your needs. These functions are arranged in menus and sub-menus.Accessing a menu functionThe menus and sub-menus can be accessed by pressing the Menu or Phonebook soft key in Idle Mode, then scrolling with the navigation keys.1. In Idle Mode, press the Menu soft key to access the main menu or press the Phonebook soft key to access Phonebook menu. 2. Scroll through the menus using the navigation keys. And then press the Select soft key if you access the main menu.3. Find the sub-menu that you wish to use by scrolling with the Up or Down key. 4. Press the Select soft key to access the sub-menu.If the menu that you have selected contains further sub-menus, repeat steps 3 and 4.5. Scroll to the option you want to choose with the Up or Down key.6. Press the Select soft key to choose the setting.Note: You can return to the previous menu level by pressing the soft key.Using the menus57You can also access the menus and sub-menus by quickly entering the corresponding menu number. Example: Accessing the Voice mail menu.1. Press the Menu soft key.2. Press the 5 for Messages.3. Press the 5 for Voice mail.List of menu functionsVarious menus let you check or change your phone settings. The following list shows the menu structure.The numbers assigned to each menu option may not match the menu number on the phone. It depends on the services supported by your SIM card.Phonebook menu 1. Phonebook (see page 63)1. Find name2. Add entry3. Speed list4. Copy all to phone5. Send all via infrared6. Delete all2. Management (see page 73)1. Own number2. Group setting3. Memory status3. Services (see page 75)1. Service directory
Using the menus58Main menu 1. Push to talk (see page 76)1. Login to service / Logout from PTT2. Callback inbox3. Contact list4. Group list5. Add group1. Create group2. Get group6. Settings1. Active service settings2. Edit service settings3. 1 to 1 call4. Listened group5. Logon at startup7. PTT call records1. Missed calls2. Received calls3. Dialled calls4. Delete all2. Call records (see page 90)1. Missed calls2. Received calls3. Dialled calls4. Delete all5. Call time1. Last call time2. Total sent 3. Total received4. Reset timers6. Call costs*1. Last call cost2. Total cost3. Max cost4. Reset counters5. Set max cost6. Price/UnitUsing the menus593. Network services (see page 94)1. Call diverting1. Divert always2. Busy3. No reply4. Unreachable5. Cancel all2. Call barring1. All outgoing2. International3. International except to home4. All incoming5. Incoming while abroad6. Cancel all7. Change barring password3. Call waiting4. Network selection5. Caller ID6. Active line*4. Sound settings (see page 102)1. Incoming calls1. Default melodies2. My sounds3. Ring volume4. Alert type2. Messages1. Short messages2. Multimedia messages3. Push to talk1. Voice option2. Call back3. Notify4. Power on/off5. Connection tone6. Key tone7. Minute minder*Shown only if it is supported by your SIM card
Using the menus608. Quiet mode9. Slider tone10. Alerts on call5. Messages (see page 108)1. Short messages1. Create2. Inbox3. Outbox4. Delete all2. Multimedia messages1. Create2. Inbox3. Outbox4. Draft5. My folder6. Delete all3. Push messages1. Inbox2. Setting3. Delete all4. Preset messages5. Voice mail1. Connect to voice mail2. Voice server number6. Broadcast1. Read2. Receive3. Channel7. Settings1. Short messages2. Multimedia messages8. Memory status1. Short messages2. Multimedia messagesUsing the menus616. Fun box (see page 134)1. WWW Services*1. Home2. Bookmark3. Go to URL4. Clear cache5. Proxy settings6. Current proxy2. Media box1. Photos2. Images3. Sounds4. Delete all5. Memory status3. JAVA world1. Downloads2. Internet settings3. Memory status4. SIM-AT MENU(SIM Application Toolkit)**7. Organiser (see page 149)1. New memo2. Calendar3. To do list4. Clock1. Set time2. Set date3. Set world time4. Set format5. Alarm6. Calculator7. Conversion1. Length2. Weight3. Volume4. Area5. Temperature8. Timer9. Stopwatch* May not be shown or supported by your network service provider.**Shown only if it is supported by your SIM card.
Using the menus628. Camera (see page 163)1. Take photos2. My photos3. My albums4. Delete all5. Settings6. Memory status9. Phone settings (see page 172)1. Display1. Wallpaper2. Skin3. Backlight4. LCD brightness5. Service display2. Greeting message3. Security1. PIN check2. Change PIN3. Phone lock4. Change password5. Privacy6. SIM lock7. FDN mode*8. Change PIN2*4. Auto redial5. Voiceclarity6. Slide down operation7. Active slide8. Anykey answer9. Fax mode10. Infrared activation11. Reset settings1. Sound settings2. Phone settings3. All settings* Shown only if it is supported by your SIM card.63Phonebook menuPhonebook offers the following features:•Phonebook: allows you to find, create or set up the speed-dialling feature and manage Phonebook entries.•Management: allows you to create or remove your own number, set up caller groups and check the memory status.•Services: allows you to use the service directory depending on your SIM card.Find name To search for a number in the phonebook, proceed as follows.1. Enter a letter(s) of the name that you want to find. The Phonebook entries are listed, highlighting the entry matching your input.2. If necessary, press the Up or Down key to scroll to the entry you want.3. Once you have found the entry, press the Ok soft key.4.To Press thedial the displayed number key.
Phonebook menu64Changing the phone memory entriesScroll to the category that you want to edit by pressing the Left or Right key. Following categories are available and you can edit information of each category by pressing the Options soft key.change the Phonebook entriesOptions soft key. For further details, see page 64.Category Then Mobile Home Office Fax OtherSelect one of the following options. For details for these options, refer to the page 65.Edit numberChange nameSend message (shown if the category contains a number)Copy (shown if the category contains a number)Send via infrared (shown if the category contains a number)Delete entryE-Mail Enter or edit e-mail address.Note Enter or edit the memo.4.To Press thePhonebook menu65Changing the SIM memory entriesTo ch ange th e SI M me mo ry entry’s information, press the Options soft key.The following options are available:Edit numberThis option allows you to change the number. You can also add a new number if none has been stored for the selected category. Change nameThis option allows you to change the name of the entry. To clear the old name, press the C key. For more information about how to enter characters, see page 48.Send message This option allows you to send a message to the number. For more information about how to send a message, see page 110.Copy This option allows you to copy the entry from the phone’s memory to the SIM card, and vice versa.Send via infrared Group Set one of the groups or no group.Graphic Set one of the images or no image.Alert Set one of the melodies or not assign.Category Then
Phonebook menu66This option allows you to copy the entry from your phone to another device that has the IrDA port via infrared.Delete entryThis option allows you to delete the entry from Phonebook. To confirm the deletion, press the Yes soft key. Otherwise, press the No soft key.Add entry You can store phone numbers and the corresponding names in the memory of your SIM card. In addition, you can store up to 1000 names in the phone memory and each name can be associated with up to five numbers. 1. Enter the number you want to save.Notes:• If you make a mistake while entering a number, correct it using the C key. For further details, see page 31.• To insert a dialling pause for special phone services, such as banking by phone, hold down the key. “P” is displayed to indicate the pause.2. When you are sure that the number is correct, press the Save soft key.3. Select the memory where the number is to be stored, either Phone or SIM, and press the Select soft key.Note: If you change phones, any numbers stored in your SIM card will automatically be available with the new phone, whereas any numbers stored in the phone’s memory must be stored again.Phonebook menu674. If you select SIM in step 3, go to step 5. If you select Phone in step 3, choose a number type using the Up or Down key and press the Select soft key. 5. Enter the associated name. For information about how to enter characters, see page 48.6. When you are satisfied, press the Ok soft key.7. If you select Phone in step 3, go to step 8.If you select SIM in step 3, enter the location number and press the Ok soft key. 8. If you want to change the entry, use the options. for information about how to do it, see page 64.If you want to return to Idle Mode, press the soft key or the key.Storing a number in Idle modeAs soon as you start to enter a number, Save appears above the left soft key to allow you to store the number in the Phonebook.Continue the procedure from step 1 on page 66 to store the number.Speed list You can set up to eight speed-dial entries and then dial them easily whenever you want, simply by pressing the associated number key.
Phonebook menu68Setting up speed-dial entries1. Press the Up or Down key to scroll to an empty location and press the Select soft key.2. When the Edit number option highlights, press the Select soft key. 3. Enter a phone number and press the Ok soft key. Or,To retrieve a number from your Phonebook, press the Phonebook soft key. Select an entry from the list and press the Ok soft key. Press the Ok soft key to save it.4. When you have finished, press the soft key or the key to exit.Editing the speed-dial entries1. Select the speed-dial entry you want to edit from the list and press the Select soft key.2. Select one of the following menu options by pressing the Up or Down key and press the Select soft key:• Edit number: allows you to change the number.• Change name: allows you to change the name of the entry.• Delete: allows you to clear the setting so that no number is assigned to the key.3. When you have finished, press the soft key or the key to exit.Phonebook menu69Using the speed-dial featureWhen the idle screen is displayed, press the number key, 2 to 9, assigned to the speed-dial entry and press the key. You can also press and hold the number key.Note: The 1 key is reserved for your voice mail server number.Dialling a number stored in the SIM cardOnce you have stored phone numbers in your SIM card, you can dial them easily whenever required.To dial a number stored in the SIM card:1. Enter the number of the SIM card location where the number you want to dial is stored.2. Press the key.The display shows the name and number stored in that location.3. Press the Dial soft key or the key.Copy all to phone You can copy all of the numbers stored in the SIM card to the phone’s memory.1. When a confirming message appears, press the Yes soft key to copy.
Phonebook menu70The numbers in the SIM card are copied to the phone’s memory, labelled with Mobile by default.Otherwise, press the No soft key.2. When you have finished, press the soft key or the key to exit.Send all via infrared Via the infrared connection, you can send your Phonebook entries to another IrDA- compliant devices and vice versa.Note: This feature may not be available depending on the devices.Sending your phonebook1. Align the IrDA ports on both sides each other.2. Access the Send all via infrared menu option in the Phonebook menu and choose one of the following options and press the Select soft key:• All: allows you to send all of the entries, from the entry you choose to the end of the SIM card and Phone list.• SIM: allows you to send all of the entries, from the entry you choose to the end of the SIM card list.• Phone: allows you to send all of the entries, from the entry you choose to the end of the Phone list.Phonebook menu713. When you select All and press the OK soft key, your phone displays all of the Phonebook entries.When you select SIM or Phone and press the OK soft key, all of the entries stored in the corresponding memory location are listed. 4. Scroll to the entry you want to send as beginning and press the OK soft key.Your phone begins sending the entry(ies).Receiving phonebook from another device1. Align the IrDA ports on both sides each other.2. Access the Infrared activation menu (see page 180) and select On to activate the port.3. When your phone receives Phonebook data from the other device:If the other person sends you one entry, your phone displays the name and the phone number and you can specify whether or not you want to save it. Continue to step 4.IrDA portIrDA port
Phonebook menu72If the person sends you the entries by All, SIM, Phone, you can select a memory location, SIM card or phone’s memory. Continue to step 5.4. Press the Save soft key to store the entry. You can also discard the entry by pressing the Cancel soft key.5. Press the SIM or Phone soft key. The entries are saved in the appropriate memory.Delete allYou can delete Phonebook entries selectively depending on the memory location, or all entries at once.1. Scroll to a desired memory selection and place a check mark ahead of it by pressing the Select soft key.Selecting All places check marks on all of the memories.Phonebook menu732. If necessary, repeat step 1 to check another options.3. When you have finished checking, press the Ok soft key. 4. When a confirming message appears, press the Yes soft key to delete all of the entries in the memory(ies). Then enter the phone password and press the Ok soft key.The password is preset to “00000000” by default. To change it, see page 176.Otherwise, press the No soft key.Own number To store your own phone number(s) with a name: 1. Scroll to an empty location by pressing the Up or Down key and press the Select soft key. 2. When Edit number highlights, press the Select soft key.3. Enter your number and press the Ok key.4. To assign a name, press the Down key to move to Change name and press the Select soft key.5. Enter a name and press the Ok soft key.6. When you have finished, press the soft key or the key to exit.To remove one of your numbers:
Phonebook menu741. Select the entry you want to delete from the Own number list and press the Select soft key.2. Scroll to Delete by pressing the Up or Down key and press the Select soft key.3. When a confirming message appears, press the Yes soft key to delete the number.Otherwise, press the No soft key.4. When you have finished, press the soft key or the key to exit.Group setting You can change the settings of the 11 predefined caller groups.1. Select a caller group by pressing the Up or Down key and press the Select soft key.2. Scroll to a setting option by pressing the Up or Down key and press the Select soft key. The following options are available:• Melody: allows you to select a melody to sound when a call comes in from a member in the group. Phonebook menu75• Change name: allows you to change the name of the group; for further details about how to enter characters, see page 48.• View image: shows the image to display when a call comes in from a member in the group.3. Change the setting as required and press the Select soft key.4. Repeat steps 2 and 3 to change other options.When you have finished, press the soft key or the key to exit.Memory status You can check how many names are stored in SIM card and phone’s memory. When you have finished, press the soft key or the key to exit.Service directory Note: This feature may not be available depending on your SIM card.The display shows the list of the numbers in the Service directory.If necessary, scroll to a number by pressing the Up or Down key and press the key to dial the number.
76Push To Talk(PTT) The Push to talk feature over cellular (PTT) is for a one-way radio service by using GPRS. Push to talk provides a direct voice communication connection with the press of the PTT key. You can use the Push to talk feature to have a conversation with one person or with a group, as long as they have a compatible device. For further details about the Push to talk feature, contact your service provider.Talking to groupAfter logging into PTT service, talk to the default group by pressing the PTT key except when the PTT key is used for 1-to-1 call. Group call for any active group is available in group list menu.When you press the PTT key, waiting screen is displayed. When you hear the access-granted tone and see nickname and group name, call setup finishes and now you can start to talk. The PTT key must be pressed down during whole talk spurt.After releasing the PTT key, screen changes to dimming. You can call the correspondent in this state. Receiving from groupAfter logging into PTT service, you can receive from active group except in silent mode and do not disturb mode. After receiving, the screen changes to dimming which means waiting.If you want not to receive while speech items are coming, then press the key. It will allow you Push To Talk(PTT)77to end call for one-term. If you want not to disturb from PTT, use do not disturb mode in sound settings (see page 104). When more than one person are trying to talk at the same time, the person’s information will be displayed. Release the PTT key and wait for other person to finish. If you still want to talk to the group, push the PTT key again. Making a one-to-one callAfter logging into PTT service, a one-to-one call is possible in these menu, callback inbox, contact list, and active member query in group list if recipient address is valid. • In the Contacts view, choose a contact and press the PTT key. • In the call logs, choose a PTT call record and press the PTT key.• In the PTT call records menu, choose a record and press the PTT key.• Choose a callback from the received callbacks list and press the PTT key.• Start a one-to-one call by choosing a nickname from the list in the active members view and pushing PTT key. Respond to the one-to-one call by pushing the PTT key during the waiting period. The waiting period is presented on the screen by showing the PTT graphic and the nickname of the previous speaker.Receiving a one-to-one callAfter logging into PTT service, receive a one-to-one call except in silent mode and do not disturb mode.
Push To Talk(PTT)78After receiving, the screen changes to dimming which means waiting.If you want not to receive while speech items are coming, then press the key. It will allow you to end call for one-term. If you want not to disturb from PTT, use do not disturb mode in sound settings (see page 104). When more than one person are trying to talk at the same time, the person’s information will be displayed. Release the PTT key and wait for other person to finish. If you still want to talk to the group, push the PTT key again. Login to service / Logout from PTT You can connect to or disconnect from the Push to talk service by using the these options. Callback inboxIn this menu, you can view the 20 most recent callbacks you have received. You can also make a PTT call using a callback request. To Press thescroll to a callback requestUp or Down key.view details of a callback requestSelect soft key.make a one-to-one callPTT key.Push To Talk(PTT)79While viewing a callback request, press the Options soft key to access the following options:Send callback: allows you to send a callback request to the selected contact.Add to phonebook: allows you to add the sender’s e-mail address to an existing entry in Phonebook.Save as: allows you to save a new entry with the sender’s e-mail address to the PTT Contact list.Delete request: deletes the currently selected callback request.Contact listIn this menu, you can view a list of all of the contacts stored in the PTT group section of Phonebook. While viewing a contact, press the Options soft key to access the following options:Send callback: allows you to send a callback request to the selected contact.Edit address: allows you to edit the currently selected e-mail address.Delete contact: allows you to delete the currently selected contact.To Press thescroll to a contact Up or Down key.view details of a contactSelect soft key.make a one-to-one callPTT key.
Push To Talk(PTT)80Add contact: allows you to add a new entry to Contact list.Group listIn this menu, you can view the PTT groups you have created using the Add group menu or saved after receiving invitation messages.To make a group call, scroll to a group and press the PTT key. On the Group list screen, press the Options soft key to access the following options:Status: allows you to change the current status of the selected group. Default: when this option is selected, the currently selected group is set as the default PTT group. When you press the PTT key without first choosing a member or group, the phone automatically dials this group.Listened: when this option is selected, the selected group is set as the listened group.Inactive: when this option is selected, the selected group is deactivate. You are unable to make a group call with the currently selected group.Send invitation: allows you to send an invitation to the members in the PTT group by using the following options:Via text message: allows you to send an invitation to the members in the PTT group Via text message. For further details, see page 109.Push To Talk(PTT)81Via infrared: allows you to send an invitation to the members in the PTT group via an IrDA connection. For further details, see page 180.Active member: allows you to view the members currently connected to the PTT service.Delete group: allows you to delete the currently selected PTT group.Delete all groups: allows you to delete all PTT groups.Group detail: allows you to access the following group options:Group title: allows you to change the name for the selected PTT group.Nickname in group: allows you to change a nickname for the selected PTT group.Group graphic: allows you to select an image to be displayed when you receive a PTT call from the selected group.Group address: shows the e-mail address and maker of the selected PTT group.Add groupIn this menu, you can create new PTT groups and register to the PTT server so that other people use the PTT group you have created. You can also add one of the PTT groups registered to the PTT server to your Group list.Note: Members in a PTT group make subgroups in the group.
Push To Talk(PTT)82Create groupYou can create a new PTT group using a domain name and register to the PTT server.To create a new PTT group:1. Select one of the following options and press the Select soft key:• Open group: allows you to add an open group. Other people can view the e-mail address of the group.• Secured group: allows you to add a secured group. Other people are not able to view the e-mail address for the group.2. Enter a name for the group and press the OK soft key.For further details about how to enter characters, see page 48.3. Connect to the PTT server by selecting the Login to service menu. For further details about connecting to the Push to talk service, see page 78.The created PTT group is registered to the PTT server.4. Select one of the following status choices for the group and press the Select soft key:• Default: when this option is selected, the currently selected group is set as the default PTT group. When you press the PTT key without first choosing a member or group, the phone automatically dials this group.• Listened: when this option is selected, the selected group is set as the listened group.Push To Talk(PTT)83• Inactive: when this option is selected, the selected group is deactivated. You are unable to make a group call with the currently selected group.5. When you are finished, press the key.Get groupYou can add one of the PTT groups that are register to the PTT server to your Group list. Note: If you have created a PTT group with an unregistered e-mail address on your server, the server will send you a notification that the PTT group cannot be added.To add a PTT group:1. Enter an e-mail address for the PTT group you want to add and press the OK soft key.For further details about how to enter characters, see page 48.2. Connect to the PTT server by selecting the Login to service menu. For further details about connecting to the Push to talk service, see page 78.3. Select one of the following status choices for the group and press the Select soft key:• Default: when this option is selected, the currently selected group is set as the default PTT group. When you press the PTT key without first choosing a member or group, the phone automatically dials this group.• Listened: when this option is selected, the selected group is set as the listened group.
Push To Talk(PTT)84• Inactive: when this option is selected, the selected group is deactivated. You are unable to make a group call with the currently selected group.4. When you are finished, press the key.SettingsIn this menu, you can select the service setting you want to use and configure various network settings that are required to send or receive PTT calls.Active service settingsYou can select the service setting you want to use. Select one of the 5 settings.Edit service settingYou can configure various network settings that are required to send or receive a PTT call.For each setting, the following options are available:PTT settingname: enter the PTT setting name.PTT username: enter the username.Default nickname: enter a nickname. PTT password: enter the PTT password.Domain: enter the domain name.IP address: enter the IP address.Push To Talk(PTT)85Connection settings: allows you to access the following options:APN settings: allows you to access the following APN settings:- Access point name: enter the access point name for the address of the PTT server.- Access point username: enter the access point user name for the address of the PTT server.- Access point password: enter the password required to connect to the PTT server.1 to 1 callIn this menu, you can change the settings for receiving one-to-one calls.The following options are available:Notify: display the notification that allows you to accept or reject all incoming one-to-one calls.On: receive all incoming one -to-one calls.Off: reject all incoming one-to-one calls.Listened groupIn this menu, you can set whether or not the phone receives listened group calls.The following options are available:Off: the phone rejects all listened group calls. On: the phone receives all listened group calls.
Push To Talk(PTT)86Logon at startupIn this menu, you can set whether or not the phone is automatically connected to the PTT service when you turn on the phone.The following options are available:Off: the phone is not connected to the PTT service when you turn on the phone.On: the phone is automatically connected to the PTT service when you turn on the phone.Ask first: you are asked to connect to the PTT service when you turn on the phone.PTT call records In this menu, you can view the records of one to one PTT calls you have missed, received, or dialled. You can also delete PTT call records. Missed callsIn this menu, you can view the 20 most recent PTT calls you have received, but did not answer.While viewing a PTT call record, press the Options soft key to access the following options:To Press theselect a PTT call recordUp or Down key.view details of a PTT call recordSelect soft key.make a one-to-one callPTT key.Push To Talk(PTT)87Send callback: allows you to send a callback request to the selected contact.Add to phonebook: allows you to add the sender’s e-mail address to an existing entry in Phonebook.Save as: allows you to save a new entry with the sender’s e-mail address to the PTT Contact list.Delete: allows you to delete the PTT call record.Delete all: allows you to delete all PTT call records.Received callsIn this menu, you can view the 20 most recent PTT calls you have received.While viewing a PTT call record, press the Options soft key to access the following options:Send callback: allows you to send a callback request to the selected contact.Add to phonebook: allows you to add the sender’s e-mail address to an existing entry in Phonebook.Save as: allows you to save a new entry with the sender’s e-mail address to the PTT Contact list.Delete: allows you to delete the PTT call record.Delete all: allows you to delete all PTT call records.To Press theselect a PTT call recordUp or Down key.view details of a PTT call recordSelect soft key.make a one-to-one callPTT key.
Push To Talk(PTT)88Dialled callsIn this menu, you can view the 20 most recent PTT calls you have dialled.While viewing a PTT call record, press the Options soft key to access the following options:Send callback: allows you to send a callback request to the selected contact.Add to phonebook: allows you to add the sender’s e-mail address to an existing entry in Phonebook.Save as: allows you to save a new entry with the sender’s e-mail address to the PTT Contact list.Delete: allows you to delete the PTT call record.Delete all: allows you to delete all PTT call records.To Press theselect a PTT call recordUp or Down key.view details of a PTT call recordSelect soft key.make a one-to-one callpush to talk toggle button.Push To Talk(PTT)89Delete allIn this menu, you can delete all of the PTT call records in each PTT call record separately. You can also delete all of your PTT call records at one time.2. Press the Delete soft key to delete the marked PTT call records.3. When a confirmation message displays, press the Yes soft key.1.To Press theselect a PTT call recordUp or Down key. To delete all of your PTT call records, select All.place a check markMark soft key.remove a check markUnmark soft key.
90Call recordsVia this menu, you can view the:• calls you missed, received or dialled.• cost of your calls.• length of your calls.Note: You can access the numbers in the three types of call records by pressing the key in Idle Mode.Missed calls This option lets you view the last 20 unanswered calls if the caller line identification is available. The number, or name if available, displays together with the date and time when the call was missed.By pressing the Options soft key, you can also:• delete the current call record from the list.• delete all of the calls.• paste the number into Phonebook.Received calls This option lets you view the last 20 received calls if the caller line identification is available.The number, or name if available, displays together with the date and time when the call was received.Call records91By pressing the Options soft key, you can also:• delete the current call record from the list.• delete all of the calls.• paste the number into Phonebook.Dialled calls This option lets you view the last 20 dialled numbers.The number, or name if available, displays together with the date and time when the call was made.By pressing the Options soft key, you can also:• delete the current call record from the list.• delete all the calls.• paste the number into Phonebook.Delete all You can delete all of the numbers stored in each call record.When a confirming messages appears, press the Yes soft key to confirm.Otherwise, press the No soft key.
Call records92Call time This option lets you view the timers for calls made and received. Notes:• If your SIM card supports the ALS (Alternate Line Service) feature, you must first select the appropriate line.• The actual time invoiced for calls by your service provider may vary, depending on network features, rounding-off for billing purposes and others.The following timers are available:Last call time: the length of the last call.Total sent: the total length of all calls made since the timer was last reset.Total received: the total length of all calls received since the timer was last reset.Reset timers: the option used to reset the call timers. You need to enter the phone password and then press the Ok soft key.Call costs This feature lets you view the cost of calls. Notes: • This feature is not intended to be used for billing purposes.• AOC (Advice Of Charge) information may display in Idle Mode, depending on your SIM card or service provider.Call records93The following options are available:Last call cost: cost of the last call made.Total cost: total cost of all calls made since the cost counter was last reset. If the total cost exceeds the maximum cost set via the Set max cost option, you can no longer make any calls until you reset the counter.Max cost: maximum cost set via the Set max cost option.Reset counters: option used to reset the cost counter; you must first enter your PIN2 (see page 188) and then press the Ok soft key.Set max cost: option used to enter the maximum cost that you authorise for your calls; you must first enter your PIN2 (see page 188) and then press the Ok soft key.Price/Unit: option used to set the cost of one unit; this price per unit is applied when calculating the cost of your calls; you must first enter your PIN2 (see page 188) and then press the Ok soft key.
94Network servicesThese menu functions are network services.Please contact your service provider to check their availability and subscribe to them, if you wish.Call diverting Note: The call divert options may be different depending on your SIM card and those not supported by your network operator may not be shown.This network service enables incoming calls to be rerouted to the number that you specify.Example: You may wish to divert your business calls to a colleague while you are on holiday.Call diverting can be set up in the following ways:Divert always: all calls are diverted.Busy: calls are diverted if your phone is engaged on another call.No reply: calls are diverted if you do not answer the phone.Unreachable: calls are diverted if you are not in an area covered by your service provider.Cancel all: all call diverting options are deactivated.You can specify individual call diverting options for each of the following call types:• Voice calls only• Fax calls only (not available when line 2 is in use)Network services95• Data calls only (not available when line 2 is in use)Example: You can:• systematically divert fax calls to your office fax machine.• divert voice calls to your colleague if you are already using the phone.Setting call diverting options1. Select the type of call diverting by pressing the Up or Down key and then press the Select soft key.2. Select the type of calls to be diverted by pressing the Up or Down key and then press the Select soft key.3. Press the Activate soft key to confirm your settings.4. Enter the number to which the calls are to be diverted.To enter an international code, hold down the 0 key until the + sign displays. You can also select a number in Phonebook or the voice mail server number, by pressing the Options soft key, followed by Phonebook or Voice server.5. When you are satisfied, press the Ok soft key. The phone sends your settings to the network and displays the network’s acknowledgement.
Network services96Deactivating specific call diverting options1. Select the call diverting option to be deactivated.2. Select the type of calls to which this option applies.3. Press the Remove soft key.The phone sends your settings to the network and displays the network’s acknowledgement.You can also deactivate all call diverting options by selecting the Cancel all option.Call barring The call barring network service allows you to restrict your calls.Call barring can be set up in the following ways:All outgoing: calls cannot be made.International: international calls cannot be made.International except to home: when abroad, calls can be made only to numbers within the current country and to your home country, that is the country where your home network provider is located.All incoming: calls cannot be received.Incoming while abroad: calls cannot be received when you are using your phone outside your home service area.Network services97Cancel all: all call barring options are deactivated; calls can be made and received normally.Change barring password: allows you to change barring password.You can specify individual call barring options for each of the following call types:• Voice calls only• Fax calls only (not available when line 2 is in use)• Data calls only (not available when line 2 is in use)Setting call barring options1. Select the type of call barring by pressing the Up or Down key and then press the Select soft key.2. Select the type of calls to be barred by pressing the Up or Down key and then press the Select soft key.3. Press the Activate soft key to confirm your settings.4. Enter your call barring password supplied by your service provider and press the Ok soft key.The phone sends your settings to the network and displays the network’s acknowledgement.
Network services98Deactivating specific call barring options1. Select the call barring option to be deactivated.2. Select the type of calls to which this option applies.3. Press the Deactivate soft key.4. Enter your call barring password supplied by your service provider.The phone sends your settings to the network and displays the network’s acknowledgement.You can also deactivate all call barring options by selecting the Cancel all option.Changing the barring passwordYou can set and change the call barring password obtained from your service provider. 1. Select Change barring password from the Call barring screen, and press the Select soft key.2. Enter the current password and press the Ok soft key.3. Enter a new password and press the Ok soft key.4. Enter the new password again to confirm it and press the Ok soft key.Network services99Call waiting This network service informs you when someone is trying to reach you during another call.You can specify individual call waiting options for each of the following call types:• Voice calls only• Fax calls only (not available when line 2 is in use)• Data calls only (not available when line 2 is in use)Activating the call waiting feature1. Select the type of calls to which the call waiting option is to be applied by pressing the Up or Down key and then press the Select soft key.2. Press the Activate soft key to confirm your settings.The phone sends your settings to the network and displays the network’s acknowledgement.Deactivating specific call waiting options1. Select the type of call to which the option applies.2. Press the Deactivate soft key.The phone sends your settings to the network and displays the network’s acknowledgement.You can also deactivate all call waiting options by selecting the Cancel all option.
Network services100Network selection The Network selection feature enables you to automatically or manually select the network used when roaming outside your home area.Note: You can select a network other than your home network only if it has a valid roaming agreement with your home network.To indicate to automatically or manually select the network when roaming:1. Press the Up or Down key until the appropriate option highlights and press the Select soft key.If you select Automatic, you are connected to the first available network when roaming.If you select Manual, the phone scans for the available networks. Go to step 2.2. Press the Up or Down key until the preferred network highlights and press the Select soft key.You are connected to that network when roaming.Network services101Caller ID You can prevent your phone number from being displayed on the phone of the person being called.Note: Some networks do not allow the user to change this setting.The following options are available:Default: the default setting provided by the network is used.Hide number: your number does not display on the other person’s phone.Send number: your number is sent each time you make a call.Active line Some SIM cards may be used with two subscriber numbers. This functions is available only if your SIM card supports it.This menu option allows you to select the line to be used to make calls. However, calls can be answered on both lines, regardless of the selected line.
102Sound settingsYou can use the Sound settings feature to customise various settings, such as the:• ringtone, volume and type for incoming calls or messages.• sounds made when your call is connected or when you press a key.• quiet mode which your phone switches to when you hold down the key in the Idle Mode.Incoming calls This option allows you to set up the ringer for incoming calls. Notes: • You can quickly enter the Incoming Calls menu by pressing the Right key in Idle mode.• If your SIM card supports the ALS (Alternate Line Service) feature, you must select the line you wish to change first.The following options are available:Each time you select a melody from the list, it plays the melody.Default melodies: allows you to select one of the predefined melodies.My sounds: allows you to select one of the sounds received from other sources, such as the WAP sites, the EasyStudio PC software or multimedia messages.Sound settings103Ring volume: allows you to adjust the ring volume. Use the Up and Down keys or the volume keys on the left side of the phone. The more bars you see, the louder the volume.Alert type: lets you specify how you are informed of any incoming calls. Melody: the phone rings using the melody selected via the Default melodies and My sounds option. See above. Vibration: the phone vibrates but does not ring. Vibration then melody: the phone first vibrates and then starts ringing.Messages This option allows you to set up the ringer for each incoming short message and multimedia message received.Short messages / Multimedia messages The following options are available:Tone: lets you choose from many different tones. Each time you select a tone from the list, the tone is played.Alert type: lets you specify how you are informed of any incoming messages. Silent: only the text notification appears; the phone neither rings nor vibrates.Ton e : the phone rings using the tone selected via the Tone option. See above.
Sound settings104Vibration: the phone vibrates but does not ring.Vibration then tone: the phone first vibrates and then starts ringing. Repetition: allows you to specify how often the phone informs you of a new message. You can choose either Once or Periodic.Push to talk You can select an alert type and melody for incoming PTT calls.Voice option This option allows you to select how the phone informs you when you receive a PTT call during a call. The following options are available:Do not disturb: the phone does not alert you when you receive a PTT call.Headset: the phone alerts you with an alert sound through a headset. Loud speaker: the phone alerts you with an alert sound through a speaker.Callback This option allows you to select whether or not the phone alerts you when you receive a callback request. The following options are available:Tone: allows you to use one of several tones. Alert type: allows you to specify how you are to be informed of incoming PTT calls.Sound settings105Repetition: allows you to specify how often the phone informs you of a new PTT call. You can choose either Once or Periodic.NotifyThis option allows you to select whether or not the phone alerts you when you receive a one to one PTT call. The following options are available:Default Melody: allows you to use one of several melodies. My Sound: allows you to use one of the melodies you have downloaded from the Wireless Web.Ring Volume: allows you to adjust the volume.Alert type: allows you to specify how you are to be informed of incoming PTT calls.Power on/off This option allows you to select the melody that the phone sounds when you switch it on or off.You can choose either Classical or Future. To turn the sound off, select Off.Connection tone This menu option allows you to specify whether or not the phone beeps when the phone connects to the network. The following options are available:Off: the phone does not beep.On: the phone beeps when your call is accepted.
Sound settings106Key tone This menu option allows you to select the tone that the keypad sounds when you press a dial key. To turn the sound off, select Off.To adjust the key tone volume, press the volume keys on the left side of the phone in Idle Mode.Minute minder This menu option allows you to specify whether or not the phone beeps every minute during a call to keep you informed of the length of your call.The following options are available:Off: the phone does not beep.On: the phone beeps every minute.Quiet mode When you hold the key down in Idle Mode, the phone switches to the Quiet Mode. You can specify whether the phone vibrates or mutes when in the Quiet Mode. Note: the phone does not alert you when you send or receive a PTT call in the Quiet Mode.The following options are available:Vibration: the phone vibrates rather than rings in the Quiet Mode. Mute: the phone mutes sounds in the Quiet Mode.Sound settings107Slider tone This menu allows you to select the slider tone that the phone sounds when you slide the folder up or down.To turn the sound off, select Off.Alerts on call This menu allows you to set the phone to all alerts while calling.To turn the alerts off, select Off.
108MessagesThis menu allows you to create, send, read and save messages with the Short Message Service (SMS: text message), Enhanced Message Service (EMS: message including simple image, animation or melody) and Multimedia Message Service(MMS: message supporting the presentation of various media types, such as full colour images and polyphonic ring tones). Voice mails are also available. Note: This feature is only available if your service provider’s network supports it. Contact your service provider for more information.Short messages Short message service (SMS) allows you to send and receive short text messages to and from other GSM mobile phones. In addition, your phone supports the Enhanced Messaging Service (EMS), which enables you to make short messages consisting of simple pictures, melodies, animations and styled text all of which adds a new dimension to simple text messages. To send text messages by phone, you must obtain the number of the SMS centre from your service provider.Receiving a new messageWhen you receive a new message, the New message icon ( ) and a text notification showing the number of the message appear on the display. You also hear an alert, depending on the message sound setting; for further details, see page 103.Messages109To read the new message(s) immediately, press the View soft key. The list of the messages appears.Note: To clear the new message notification on the display, press the key. When you also have missed calls, voice mails, short messages or multimedia messages, and multi CBs, the right soft key indication changes in the following order: Missed, Connect, View, CB and Phonebook.Managing memoryInbox and Outbox share a given amount of memory in your phone or SIM card. When the message memory is full, the New message icon ( ) blinks and an error message displays. (It disappears when you press the key, but it reappears if you don’t delete old messages.) In this case, you cannot receive any new messages. You must delete one or more old messages to get free memory for new messages using the Delete option within the Inbox or Outbox or the Delete all option; for further details, see page 114.Create Using this menu, you can write messages, containing text, images and melodies.1. Create a message.On the first line of the display, you see the number of remaining characters you can enter, the number of current message and the maximum messages you can create, and the font style you set in Text option. Note: For further information about how to enter characters, see page 48.
Messages1102. While entering your message, press the Options soft key to use the following options.• Send: allows you to send the message. Refer to the next step.• Text: allows you to format the text. Following text attributes can all be combined as required. Text size: Small/Medium/Large Text mode: Normal/Underscore/Strikethrough Bold: Off/On Italic: Off/On Alignment: Left/Center/Right • Add media: allows you to add pictures, animations and/or melodies to the message. Select a category; Add picture, Add animation or Add melody. You can then choose a factory-set object or an object that you have received from another source and stored in the Media box. See page 140.• Add phonebook: allows you to add phone number(s) from the phonebook to the message. • Preset messages: allows you to add a preset message to your text. Select one of nine messages stored in the Preset messages menu option. See page 127.• Save message: allows you to save the message so that it can be sent later. You can read the message in the Outbox.3. When you have finished entering your message, choose Send from the options.Messages1114. Enter a destination number on the Address screen.You can search for a number in Phonebook by pressing the Phonebook soft key. Note: To clear or clear all your input, press or press and hold the C key. When you have no input, press and hold the C key to move to the previous screen.To send the message to multiple destinations up to 5, press the Add soft key and repeat step 4.5. When you have finished entering the numbers, press the Ok soft key.6. If the Enter centre screen displays, enter the service number and press the Ok soft key.You can store the SMS service centre number. For details, see page 130.Note: When the phone fails to send the message; Press the Retry soft key to try again the transmission. Or, press the No soft key and the Save soft key to save the message or exit the menu by pressing the No soft key.Inbox Your phone receives incoming messages and saves them in the Inbox. SMS is usually saved in the SIM card, but if the SIM memory is full, the incoming messages will be saved in the phone’s memory.When the Inbox menu is selected, the list of messages received displays with the:• sender’s phone number, or name if stored in Phonebook.
Messages112• message status; for a read message, for a message to read or for an incomplete message.To view a message, scroll to it and press the Select soft key. The screen shows the:• date and time when the message was received.• memory where the message was stored; for the SIM card or for the phone’s memory.• message contents.You can scroll to the next or previous message by pressing the Left or Right key.To scroll through the message contents, press the Up or Down key. When you focus on an object that includes a melody, the melody is played.You can choose the following options by pressing the Options soft key:Delete: allows you to delete the message.Message reply: allows you to reply by sending a message. Call back: allows you to call the sender back.Cut address: extracts phone numbers, email addresses or URL addresses in the text, so that you can call the number or send a message to the number or save it in your Phonebook.Send: allows you to send the message to another person.Edit: allows you to edit the message.Extract media: you can save media (except the predefined EMS animations and sounds) from the message into Media box. You can use these items when writing a message; for further details, see page 110.Messages113Transfer: allows you to transfer the message from the SIM card to the phone’s memory or vice versa. Outbox Outbox stores any messages that you have already sent or just saved without sending.When the Outbox menu option is selected, the list of messages you have sent or saved displays with the:• recipient’s phone number, or name if stored in Phonebook.• message status; for a sent message or for a message to send.To view a message, scroll to it and press the Select soft key. The screen shows the:• message status; for a sent message or for a message to send.• memory where the message was stored; for the SIM card or for the phone’s memory.• message contents.You can scroll to the next or previous message by pressing the Left or Right key.To scroll through the message, press the Up or Down key. You can choose the following options by pressing the Options soft key:Delete: allows you to delete the message.Cut address: extracts phone numbers, email addresses or URL addresses in the text, so that you can call the number or send a message to the number or save it in your Phonebook.
Messages114Send: allows you to send the message to another person.Edit: allows you to edit the message.Transfer: allows you to transfer the message from the SIM card to the phone’s memory or vice versa. Delete all You can delete all messages stored in the SIM card and phone’s memory in this menu.1. Scroll to a message box and place a check mark ahead of it by pressing the Select soft key.Selecting All places check marks on all of the message boxes.2. If necessary, repeat step 1 to check another box.3. When you have finished checking, press the Ok soft key. 4. When a confirming message appears, press the Yes soft key to delete all of the messages in the box(es).Otherwise, press the No soft key.Multimedia messages Multimedia Message Service (MMS) is a messaging service very similar to Short Message Service (SMS). It provides asynchronous delivery of personal multimedia messages from between phone and phone, phone and e-mail, phone and web(by URL).Messages115In addition to the familiar text content of text messages, multimedia messages can contain images, graphics, voice and sounds. An MMS message is a multimedia presentation in a single entry. It is not a text file with attachments.Using the MMS feature, your phone can receive multimedia messages. You can also send picture messages. This function is available only if it is supported by your service provider. Only phones that offer picture message features can receive and display picture messages.Retrieving a new messageWhen you are retrieving a message, the Retrieving icon ( ) appears on the display. When you finish retrieving a new message, the New message icon ( ) and a text notification showing the number of the message appear on the display. You also hear an alert, depending on the message sound setting; for further details, see page 103.To read the new message in Idle Mode, press the View soft key. And then you see the list in the Inbox. If you select a message, you can read it.Notes: • while retrieving a new message, you cannot access WAP sites, and cannot also enter the Downloads menu (see page 144).• To clear the new message notification on the display, press the key. When you also have missed calls, voice mails, short messages or multimedia messages, and multi CBs, the right soft key indication changes in the following order: Missed, Connect, View, CB and Phonebook.
Messages116If Msg. reception was set to Manual (for details, see page 131), when the New message icon ( ) appears on the display, you have to retrieve messages in the Inbox. You select a message with the icon ( ) in the Inbox. Then you can select retrieve or delete message by pressing the Opt. soft key.Managing memoryWhen the memory is full, the New message icon ( ) blinks and an error message displays. (It disappears when you press the key, but it reappears if you don’t delete old messages.) In this case, you cannot receive any new messages. You must delete one or more old messages to get free memory for new messages using the Delete option within the Inbox, Outbox, Draft or My folder, or the Delete all option; for further details, see page 125. Notes: • You can only receive up to 150 messages.• Multimedia message boxes, Camera, and Media box share a given amount of memory in your phone. You can also use the Delete or Delete all option to delete some sounds or images in Camera or Media box.CreateThis menu option allows you to create a new multimedia message and then send it to multiple destinations.Messages1171. Select one of the following items using the Up or Down key and press the Add soft key.Item How to add Subject 1. Enter a subject of your message. For details about entering characters, see page 48.2. Press the Ok soft key.Note: To return to previous screen while entering a subject, press and hold the C key.Picture To add a new picture;1. Select the Create new option.2. Take a photo using the camera feature. For details about the camera feature, see page 163.Picture(continued)3. Select one of pictures you want to add. The picture is displayed.4. Press the Add soft key.To add a picture in the Media box;1. Select one of the picture categories. The picture list of the category is displayed.2. Select one of pictures you want to add. The picture is displayed.3. Press the Add soft key.
Messages118Sound To add a new sound;1. Select the Record new option.2. Press the Record soft key to start recording.3. Press the Stop soft key to stop recording.4. Press the Play soft key to replay the sound. Or, press the Add soft key to add it. Enter the sound’s name and press the Ok soft key. The sound is added to the message and saved in Media box automatically.Sound(continued)To add a sound in the Media box;1. Select one of the sound categories. The sound list of the category is displayed. 2. Select one of the sounds you want to add.3. Press the Select soft key to add it.Item How to add Messages1193. Press the Opt. soft key to use the following options. • Preview: shows your message as it will display on the recipient’s phone. To go back to the message screen, press the Edit soft key. To send the message, press the Send soft key and go to step 4.• Send: allows you to send the message to another person. Refer to the next steps.• Add page: allows you to add up to 10 pages. You can move to each page using the Left or Right key on the message screen.• Page timing: allows you to set how long one page of the received messages displays. After a specified time, the display automatically scrolls to the next page.Message1. Enter a new message. Or you can enter a preset message.To enter a preset message;• Press the Opt. soft key and select the Preset messages. • Select one of the preset messages.2. Press the Opt. soft key and select the Done option to add the message.Note: To return to previous screen while entering a subject, press and hold the C key.Item How to add
Messages120• Text effect: allows you to set the colour, size and style of the message text.• Clear subject/picture/sound/message: allows you to delete the subject, image, sound or message by selected work.• Delete page: allows you to delete the current page.• Save message: saves the message in Draft (see page 124) or My folder (see page 125).Note: To go back to the edit screen, press the soft key or the C key.4. When you finish creating the message, select Send from the options.5. Select an entry on the Send screen.If it is an empty entry, enter a destination as below.Number: to enter a destination number.Email: to enter e-mail address.Phonebook: to enter a destination from phonebook. After entering a destination, press the Ok soft key.If it is not an empty entry, do the following things.Edit address: to edit the selected address.Delete address: to delete the selected address.Note: To clear or clear all your input, press or press and hold the C key. When you have no input, press and hold the C key to move to the previous screen.Messages1216. To send the message to multiple destinations up to 20, repeat step 4.7. When you have finished entering the destinations, press the Send soft key.If you want to cancel a sending message or resend a message that you failed to send, go to the Outbox. Then select the message and the option in point. For further details, see page 123.Inbox Your phone receives incoming messages and saves them in the Inbox. When the Inbox menu is selected, the list of messages received displays with the:• message’s subject or No subject if the message had no subject.• sender’s phone number, or name if stored in the Phonebook.• message status; for a retrieving message, for a read message, for a message to read, for a read notification message and for a notification message to read. Note: The icon of message status can have various forms like ,, as the priority that sender fixed (see page 131).To view a message, scroll to it and press the Select soft key. But you cannot view the retrieving message.To scroll through the message contents, press the Up or Down key. When the message has more than one page, you can press the Left or Right key to move through the pages or the pages are moved through as predefined page timer, which the sender sets, has elapsed.
Messages122Notes: • Some types of sound or picture may not be able to play or display. • When the message has an attachment like video clips, the Attachment icon ( ) appears on the title line. You may not play the attachment. And you may also not extract it from the message.You can choose the following options by pressing the Opt. soft key:Delete: deletes the messageReplay: replays the message.Reply: replies to the sender by sending a message.Forward: forwards the message to another person.Call back: allows you to call the sender back.Cut media: extracts the picture or sound, so that you can set them as a wallpaper or ringtone or you can send them as a multimedia message.Cut address: extracts phone numbers, email addresses or URL addresses in the text, so that you can call the number or send a message to the number or save it in your Phonebook.Properties: shows you detailed information about the message.Move to My folder: moves the message to the My folder for later use. Messages123Outbox Outbox stores messages that you sent, you failed to send and you cancelled sending.When the Outbox menu option is selected, the list of messages you have sent or saved displays with the:• message’s subject or No subject if the message had no subject.• recipient’s phone number, or name if stored in the Phonebook.• message status; for a sending message, for a sent message, for a message that you failed to send or you cancelled sending, for a delivery report. When a receiver retrieves a message you sent and the Delivery report option (see page 131) is set to on, is changed into .To view a message, scroll to it and press the Select soft key. But you cannot view the sending message.To cancel a sending message, scroll through and select the message by pressing the Up or Down key, and then press the Select soft key. Then the confirming message appears. In the message, you can cancel sending it by pressing the Yes soft key.To resend the message that you failed to send, scroll through and select the message by pressing the Up or Down key, and then press the Select soft key. Then press the Opt. soft key, and then select the Send option.To scroll through the message, press the Up or Down key. When the message has more than one page, you can press the Left or Right key to move through the pages or the pages are moved through as paging timing that sender fixed automatically.
Messages124You can choose the following options by pressing the Opt. soft key:Delete: deletes the message.Replay: replays the message.Send: send the message.Properties: shows you detailed information about the message.Move to My folder: moves the message to the My folder for later use.Draft This message box stores messages that you save, interrupted messages by an incoming call, or messages while you create a new message.Note: Saves messages that are failed to send in the Outbox.To view a message, scroll to it and press the Select soft key.You can choose the following options by pressing the Opt. soft key:Send: replies to the sender by sending a message.Replay: replays the message.Delete: deletes the message.Properties: shows you detailed information about the message.Messages125My folder You can move the messages stored in the Inbox or Outbox to the My folder by using the Move to My folder option. While making a new message, you can also save to My folder by using the Save message option.To view a message, scroll to it and press the Select soft key.You can choose the following options by pressing the Opt. soft key:Delete: deletes the message.Replay: replays the message.Send: send the message.Cut media: extracts the picture or sound, so that you can set them as a wallpaper or ringtone or you can send them as a multimedia message.Cut address: extracts phone numbers, email addresses or URL addresses in the text, so that you can call the number or send a message to the number or save it in your Phonebook.Properties: shows you detailed information about the message.Delete all This menu option allows you to delete all of the messages in each message box. You can also delete all of your messages at one time.1. Scroll to a message box and place a check mark ahead of it by pressing the Select soft key.Selecting All places check marks on all of the message boxes.
Messages1262. If necessary, repeat step 1 to check another box.3. When you have finished checking, press the Ok soft key. 4. When a confirming message appears, press the Yes soft key to delete all of the messages in the box(es).Otherwise, press the No soft key.Push messages This menu allows you to set to be received and read push messages.The following options are available:Inbox: Your phone receives push messages and saves them in the Inbox. And you can read push messages in the Inbox. Setting: This option allows you to set the push message receiving options.Always: always push message comes in.Never: the push message never comes in.Optional: Only the push messages whose setting matches to the number in this option come in. The preset number is SMS service centre. You can also edit the number.Delete all: deletes all of the push messages.Messages127Preset messages Using this menu, you can preset up to nine messages that you use most frequently. When you access this menu, the preset message list displays. 1. Scroll to a message or an empty entry by pressing the Up or Down key. 2. Press the Select soft key and enter a new message or change the old message. For further details about entering characters, see page 48.3. Press the Ok soft key to save the message. Voice mail When you receive a voice mail, your phone displays the icon and you hear an alert.Connect to voice mail • In Idle Mode, when you receive a new voice mail, press the Connect soft key to access your voice mail server and follow the instructions provided.• In Idle Mode, hold the 1 key down to access your voice mail server and follow the instructions provided.• Call your voice mail server number by accessing the Connect to voice mail menu and follow the instructions provided.
Messages128Voice server number Before using the voice mail service, you must store the voice mail server number obtained from your service provider.When you select an entry, following options are available.Edit number: enter a voice mail server number or press the Phonebook soft key to enter a number from the Phonebook. And then press the Ok soft key.Change name: enter a server name and press the Ok soft key to save it.Delete: when the confirming message appears, press the Yes soft key. To cancel, press the No soft key. Broadcast This network service allows you to receive text messages on various topics, such as the weather or traffic. Messages are displayed immediately as they are received, provided that: • the phone is in Idle Mode. •the Receive option is set to On. • the message channel is currently active on the channel list.When you get broadcast messages, you can see the messages in Idle Mode. If it is short you can see the display, otherwise, press the CB soft key to read the message.Messages129In the Broadcast menu option, the following options are available:Read: lets you read the received broadcast messages. Archive: shows the list of the messages you saved from the temporary list. Temp ora ry: shows the latest messages. These messages will be gone when the phone is switched off.If the message is long, press the UP or Down key. When you read a message, press the Options soft key to access following options:Cut number: shows the list of numbers included in the message.Save: (Temporary only) saves this message to Archive list.Delete: delete this message.Delete all: delete all message on the list.Receive: allows you to turn the reception of broadcast messages on or off.Channel: the check mark inside All check box indicates that the channel is enabled. To enable or disable this channel press the Select soft key, then select Enable or Disable.The Add channel option allows you to add a new channel to the channel list. Enter the appropriate channel code obtained from your service provider and a title for the channel.
Messages130Settings Short messages Using this menu, you can set up default SMS information. The following options are available:Service centre: allows you to store or change the number of your SMS centre required when sending messages. You must obtain this number from your service provider.Validity period: allows you to set the length of time your messages are stored at the message centre while attempts are made to deliver them. Message type: allows you to set the message type to Text, Fax, Voice, ERMES, X400, or E-Mail. The network can convert the messages into the selected format.Reply path: allows the recipient of your SMS message to send you a reply via your message centre, if the service is provided by the network.Delivery report: allows you to set on or off. When this function is set to on, the network informs you whether or not your message has been delivered.Character support: allows you to select the character set when editing and sending messages.GSM-alphabet: you can only send the message using GSM characters.Uni-code: you can send the message using Unicode characters, including GSM alphabets. And the maximum number of characters which can be entered in a message is reduced to half in length.Automatic: if you select Automatic, the phone selects the character set according as you use Unicode characters or not.Messages131Multimedia messages Using this menu, you can set up default settings for sending or receiving MMS message. The following options are available: Send settings: The following options are available:Priority: allows you to set the priority of message.Validity period: allows you to set the length of time your messages are stored at the message centre while attempts are made to deliver them. Delivery after: you can set the delay time before the phone sends your messages.Address hiding: when this option sets to On, your phone number does not display on the recipients phone.Delivery report: when this option sets to On, the network informs you whether or not your message has been delivered.Read reply: when this option sets to On, your recipient’s phone sends a reply to let you know when your message was read by her/him.Receive settings: the following options are available:Msg. reception: allows you to set how you receive a message. You can select one of Manual, Automatic and Reject.Anonymous reject: when this option sets to On, your phone rejects messages without a caller ID.Adverts reject: when this option sets to On, you can reject advertisements by service provider.
Messages132Report allowed: when this option sets to Off, your phone does not send a reply to the recipient’s phone even if the sender asks for the read reply.MMS profiles: in this menu, you can configure MMS profile settings that are required when you send or receive multimedia messages. Current profile: allows you to select one profile to use currently.Profile setting: allows you to set up to five profiles.• Profile name: enter the name of the profile.• Server URL: enter the address of profile server.• GSM setting: allows you to change the proxy settings for the GSM network. - Gateway: enter the IP address and IP port. - Data call type: select a network connection type between ISDN and Analogue. - Dial number: enter the server phone number. - Login ID: enter the server login ID. - Password: enter the server password.• GPRS setting: allows you to change the proxy settings for the GPRS network. - Gateway: enter the IP address and IP port. - APN: enter the access point name used for the address of the GPRS network gateway. - Login ID: enter the user ID required to cconnect to GPRS network. - Password: enter the password required to connect to the GPRS network.Messages133• Bearer: select the bearer to be used for each type of network accesses. - GPRS only: it only work in GPRS network. - GSM only: it only works in GSM network.Memory status You can check the memory status for messages. Short messages You can check how many messages are stored in SIM card and phone’s memory. When you have finished, press the soft key or the key to exit.Multimedia messages Multimedia message boxes, Camera and Media box share a given amount of memory in your phone.The display shows the status of free and used memory.You can see the used memory status of multimedia message boxes, Camera and Media box by pressing the Left or Right key.
134Fun boxThe Fun box menu contains several fun options:• WWW services•Media box•JAVA world•SIM-AT menuWWW services Your phone comes equipped with a WAP (Wireless Application Protocol) Browser, making it possible for you to access the Wireless Web.Each time you start the WAP Browser, the phone connects to the Wireless Web and the service indicator icon ( or ) appears on the display to inform you that you are connected to the Wireless Web and will be billed accordingly. Rates vary according to your service option.The WAP Browser ends the network connection after a certain period of inactivity and automatically reconnects as necessary. For this reason, you may find that you are billed for several network connections within a single session. This is normal and is designed to minimise your bill.Fun box135Home When you select this menu option, the phone connects to the network and loads the homepage of the Wireless Web service provider. Once connected, the homepage displays. The content depends on the service provider. Note: To quickly launch the WAP browser from Idle Mode, press the key.To scroll through the screen, use the Up and Down keys.To exit the browser, press the key at any time. The phone returns to Idle Mode.Navigating the wap browserEntering text in the wap browserWhen you are prompted to enter text, the current text input mode appears above the right soft key.To Press thescroll through and select browser itemsUp or Down key until the item you want highlights, and then press the soft key.select a numbered itemcorresponding numeric key.return to the previous page (or Back) soft key or C key.return to the startup homepage key and select the Home browser option. For details, see page 136.
Fun box136For further information on how to enter text, see page 48.Using the WAP browser menusThere are various menu options available when surfing the Wireless Web.To access the WAP Browser menu:1. Press the key or scroll to the logo on the top left of all WAP pages and then press the soft key.A list of options appears.2. Highlight the required option using the Up or Down key.3. Press the soft key to select the option.4. If necessary, select the secondary option by pressing the Up or Down key and then press the soft key.Note: The WAP Browser menus may vary, depending on your version of the browser.The following WAP Browser menus are available:Back: returns to the previous page.Home: takes you back at any time to the homepage of the Wireless Web service provider.Exit: exits the WAP browser.Reload: reloads the current page.Show URL: shows the URL address of the WAP page you are currently accessing.About: shows browser information.Fun box137Using the WAP browser optionsSeveral options are available when you are surfing the Wireless Web. To access these options, press the key once connected to the Wireless Web.Goto URL: allows you to manually enter the URL address of the site that you wish to access. Bookmark: allows you to use the Bookmark menu option. For details, see page 137.Messages: allows you to read or write an SMS message. For details, see page 108.Media box: allows you to use your Media box. For details, see page 140.Answering a call during a WAP connectionYou can receive an incoming call while you are navigating the WAP browser. Answer the call by pressing the key or the Accept soft key, as you normally would. After ending the call, you can continue navigating on the WAP page you were previously accessing.Bookmark This menu option allows you to store the URL addresses of up to 15 of your favourite Web sites. To store a URL address:1. Select an empty location and press the Select soft key. 2. Enter the address and press the Ok soft key to save it.
Fun box1383. Enter the name of the bookmark and press the Ok soft key.For further information about how to enter text, see page 48.Once you have stored an address, the following options are available when you select it.Go: allows you to access the site directly.Edit: allows you to change the name and URL address of the bookmark.Delete: allows you to delete the bookmark.Go to URLThis menu option allows you to manually enter the URL address of the Web site that you wish to access.Enter the URL address and press the Ok soft key.For further information about how to enter text, see page 48.Clear cache This menu option allows you to clear the information stored in the cache, the phone’s temporary memory used to store the most recently accessed WAP pages.Fun box139Proxy settings This menu option allows you to set up five proxy servers.Note: You do not need to change the browser settings in most cases. Change the settings only when your network provider asks you to.For each proxy, the following options are available:Proxy name: enter the name of the HTTP proxy server.GSM setting: you can change the proxy settings for the GSM network.Gateway: enter the IP Address and IP PortData call type: select a network connection type; ISDN or Analogue.Dial number: enter the PPP server phone number. Login ID: enter the PPP server login ID.Password: enter the PPP server password.GPRS setting: you can change the proxy settings for the GPRS network.Gateway: enter the IP Address and IP Port.APN: enter the access point name used for the address of the GPRS network gateway.Login ID: enter the user ID required to connect to the GPRS network.Password: enter the password required to connect to the GPRS network.
Fun box140Home URL: you can change the address of your startup homepage. When the default homepage displays, you can delete it using the C key and enter your own choice. To enter any special characters, / for example, use the Symbolic mode; see page 55.Bearer: you can select the bearer to be used for each type of network accesses.GPRS first: your phone will search for the GPRS network first. If this service is not available, you can set the GSM service temporarily.GPRS only: the phone only works in GPRS networks.GSM only: the phone only works in GSM networks.Current proxy This menu option allows you to activate one of the proxies you set up to use the WAP connection.Media box This menu option stores various media items from other sources, such as the WAP sites, the EasyStudio PC software or multimedia messages. Photos This option allows you to view the taken pictures.My photos: allow you to view the photos in my photos.Fun box141My album1 / My album 2: allow you to view the photos in the selected album.When you view a photo, press the Options soft key to do the followings.Send: allows you to send it via a message.Rename: allows you to rename it.Delete: allows you to delete it.Move to album: allows you to move it to one of the albums.Set as: allows you to set it as a wallpaper or a caller ID. Wallpaper: allows you to set it as a wallpaper.Caller ID: allows you to set it as a caller ID.Protection: allows you to protect it from deletion or not.Properties: allows you to view the detail information of the photo.Images This option allows you to view the images received from other sources, such as the WAP sites, the EasyStudio PC software or multimedia messages.When you view an image, press the Options soft key to send, rename, delete, set as a wallpaper or view the properties.For further details about these options, see the options of the Photos menu (see page 140).
Fun box142Sounds This option allows you to listen to the recorded voices and the melodies received from other sources, such as the WAP sites, the EasyStudio PC software or multimedia messages.Voices: allow you to listen to the recorded voices.My sounds: allow you to listen to various melodies.When you select a sound, press the Options soft key to send, rename, delete, set as a ringtone (only in My sounds) or view the properties.For further details about these options, see the options of the Photos menu (see page 140).Delete all This option deletes all of the photos, images and sounds in the Media box. Photos1. Scroll to a box and place a check mark ahead it by pressing the Select soft key.Selecting All places check marks on all of the items. If you want to delete the protected photos and the caller ID photos, select the With protected photos option and the With caller ID photos option.2. If necessary, repeat step 1 to check another box.3. When you have finished checking, press the Ok soft key. Fun box1434. When a confirming message appears, press the Yes soft key to delete all of the photos in the box(es).Otherwise, press the No soft key.ImagesWhen a confirming message appears, press the Yes soft key to delete all of the images.Otherwise, press the No soft key.Sounds1. Scroll to a sound box and place a check mark ahead it by pressing the Select soft key.Selecting All places check marks on all of the boxes. 2. If necessary, repeat step 1 to check another box.3. When you have finished checking, press the Ok soft key. 4. When a confirming message appears, press the Yes soft key to delete all of the sounds in the box(es).Otherwise, press the No soft keyMemory status Media box, Camera and multimedia message boxes share a given amount of memory in your phone.The display shows the status of free and used memory.You can see the used memory status of Media box, Camera and multimedia message boxes by pressing the Left or Right key.
Fun box144JAVA world You can download MIDlets (Java applications running on mobile phones) from various sources using the WAP Browser and store them in your phone.DownloadsA list of Java games is displayed. In basic, two pre-loaded MIDlets (Java games) are provided. If the list of Java games is empty, a pop up message is displayed to invite to download a new game. To add MIDlets to the list, you can download MIDlets from the Web sites. SnowBallFightThe goal of this game is to challenge and defeat the snowball fight champions of four different teams.Accessing a gameAfter loading the game, press any key twice to go to the first menu screen. At the first menu screen, press key to play a game, or press key to access the main menu of this game.To Press thefind a game Up or Down key.run a gameLaunch soft key.view detail informationInfo soft key.delete the gameDelete soft key in the information display.Fun box145Play: allows you to start a new game or a saved game. Saved game allows you to continue the beginning of last stage you played.Instructions: shows you the explanation of control keys, offense items and defense items.Configuration: allows you to turn the sound, vibration on or off and select the game speed from 1 to 5.Quit: quits the game and returns to the downloads menu screen.Playing a gameMove the character along the street using the navigation key. If you have enough gold coins which you can earn while fighting to buy items, you can buy defense items at the drug store and offense items at the item shop. Move the character to the team of current stage and press key to select it. When the snowball fight game starts, hit the rival kids with snowballs and avoid theirs. While fighting you can use items you have. If you raise enough mana, you can also use special attack. You should win all fights in four stages in order to challenge the champions of the snowball fight.Key Commands4/6 or Left/Right: move left or right2,5 or Up, :control the distance at the first press and throw the snowball at the next press.8 or Down: use the special attack depending on your mana3: enters item mode to use your item, select the item you want to use by pressing 2, 5, Up or key.
Fun box146Special attacksLevel 1: Aurora, all enemies are hit by a snowball.Level 2: Ice dragon, all enemies are hit by a snowball and frozen for 8 seconds.Level 3: Icicle storm, double powered snowball attack to all enemies and decreasing enemies’ attack accuracy for 10 seconds.BubbleSmileBubbleSmile is an arcade puzzle game.Accessing a gameAfter loading the game, you will see the following options, press key to select one of them:Start game: allows you to start a new game with timed mode or skilled mode.• Timed mode: you have to achieve the best score before gauge disappear at the time bar. When you get the same coloured bubble together, gauge at the time bar increases.• Skilled mode: you have to make more then 4 bubbles disappear at once for the gauge at the skill bar increase. If 3 or none of bubbles disappear, then the gauge decreases.Continue: allows you to continue the last game you played. The menu is only available when a game has already been played.High score: shows you the high score table.How to play: shows you the instruction of this game.Option: allows you to set the sound on or offFun box147Playing a gameYour score goes up when you remove the bubbles. Only when more than 3 same coloured bubbles line up horizontally or diagonally, they disappear. To line up the bubbles, move the band rounding three bubbles to suitable place and rotate it. When the game is over, your score is ranked on the high score board if it is within third. Key Commands2, 4, 6, 8, or navigation key: move the band up, down, left or right1: rotate the bubbles in the band counterclockwise3: rotate the bubbles in the band clockwiseInternet settings This menu option allows you to set the information to connect the Java server. This information is provided by the network operator automatically, but you can change it manually.APN: enter the access point name used for the address of the GPRS network gateway.Login ID: enter the user ID required to connect to the GPRS network.Password: enter the password required to connect to the GPRS network.DNS settings: enter the DNS address. The DNS (Domain Name Server) address to connect the Java server is automatically set when making data call set up.
Fun box148Memory statusYou can check the free space for Java download.The display also shows the total memory and used memory. SIM-AT MENU (SIM Application Toolkit)If you use a SAT card that provides additional services, the SAT menu displays. For further details, see your SIM card instructions.Shown only if it is supported by your SIM card.
149OrganiserThe Organiser feature enables you to:• view the calendar and/or write a memo or to do list.• set the current date and time, and find out what time it is in various cities around the world.• set the alarm so that the phone rings at a specific time.• use your phone as a calculator, unit convertor, timer or stopwatch.New memo This menu option allows you to create a new memo.Note: You can also access this menu by holding down the C key in Idle Mode.1. Write your memo of up to 100 characters and press the Ok soft key.For further information about how to enter text, see page 48.2. Select the category of the memo to be saved and press the Select soft key.The following categories are available:• Scheduler: general schedule events, such as appointments or meetings.• To do list: tasks you need to do. They are saved on the to do list.• Call: calls you need to make.
Organiser150• Anniversary: anniversaries to be remembered, such as wedding anniversaries, birthdays or other special days.Note: You can save up to 25 items to each category, so you can save 100 memos totally.3. Scroll to a date on the calendar by pressing the navigation keys. Press the Select soft key.4. If applicable depending on the category you selected, enter the event time and press the Ok soft key. 5. If you have selected the 12-hour time format (see page 156), select AM or PM by pressing the Up or Down key and then press the Select soft key.6. To set an alarm for the memo, press the Yes soft key. Otherwise, press the No soft key. The memo is saved immediately. Go to step 10.7. Enter the time for the alarm to sound and press the Ok soft key.8. If you have selected the 12-hour time format (see page 156), select AM or PM by pressing the Up or Down key and then press the Select soft key.9. Select an alarm melody and press the Select soft key. The memo is saved and then displays on the screen.Organiser15110. You can choose the following option by pressing the Options soft key:• Add: allows you to add a new memo on the day.• Delete: allows you to delete the memo.• Edit: allows you to edit the memo.• Move: allows you to move the memo to a different date.• Copy: allows you to copy the memo to a different date.11. When you have finished, press the soft key or the key to exit.Calendar The calendar helps you to keep track of schedule, calls that you need to make, tasks that you need to do and anniversaries. You can set the alarm to ring when the set date for a schedule is reached.Consulting the calendarTo Press themove to another day Left or Right key.move to another weekUp or Down key.move to the previous or next monthUp or Down key and hold it down move to the previous or next yearLeft or Right key and hold it down.
Organiser152The following options are available when you press the Options soft key on the Calendar display:Add memo: allows you to add a new memo on the day.Go to date: allows you to enter a particular date and then schedule an event on that date.View all: shows all of the events that you have scheduled. Delete day: deletes the scheduled event on the selected day. Delete all: deletes all of the events that you have scheduled.Creating a new memo1. Scroll to a date on the calendar, referring to page 151, and press the Select soft key.2. Write your memo and press the Ok soft key.For further information about how to enter characters, see page 48.3. Select the category of the memo to be saved and press the Select soft key. The following categories are available:• Scheduler: general schedule events, such as appointments or meetings.• To do list: tasks you need to do.• Call: calls you need to make.• Anniversary: anniversaries to be remembered, such as wedding anniversaries, birthdays or other special days.Organiser1534. Follow the procedure from step 4 on page 150 onwards to save the memo.Viewing your calendar memosA date that has a memo associated with it is highlighted in a red box. If you select a date when events have already been scheduled, the number of memos of each type is shown at the bottom of the calendar.• : General schedule events•: To do list•: Calls• : Anniversaries Press the Select soft key to view the memos.If you have created more than one memo on the same day, you can scroll to the event you want to view by pressing the Left or Right key.The following options are available when you press the Options soft key:Add: allows you to add a new memo. For further information about how to add a memo, see page 149.Delete: allows you to delete the memo.Edit: allows you to edit the memo.Move: allows you to move the memo to a different date.Copy: allows you to copy the memo to a different date.
Organiser154To do list This menu allows you to view a list of tasks.To create a new memo of the To do list type:1. Write the memo about your task and press the Ok soft key.For more information about how to enter characters, see page 48.2. Scroll to a date on the calendar, referring to page 151, and press the Select soft key.3. Follow step 4 on page 150 onwards to save the memo.Once you have defined tasks, they are listed with a status mark ( for Done or for Undo) within the To do list menu.To scroll to a specific task, press the Up or Down key and press the Select soft key. The task displays with the deadline, alarm setting, job details and status mark.You can scroll to the previous or next task by pressing the Left or Right key.The following options are available when you press the Options soft key:Add: allows you to add a new task. For details about adding To do list-type memos, see page 149.Mark: allows you to change the status mark.Edit: allows you to edit the contents of the task. Move: allows you to move the task to a different date.Organiser155Copy: allows you to copy the task to a different date.Delete: allows you to delete the task.Delete all: allows you to delete all of tasks from the list.Clock This option allows you to change the current time and date displayed. You can also check the current time for Greenwich Mean Time (GMT) and 22 major cities around the world.The following options are available:Set time: allows you to enter the current time. You can choose the time format in the Set format menu option; see page 156.Note: Before setting the time, you must specify your time zone in the Set world time menu option.Set date: allows you to enter the day, month and year. You can change the date format in the Set format menu option; see page 156.Set world time: allows you to check the current time in GMT and 22 major cities around the world. Scroll through the cities using the Left or Right key.The screen shows the:•city name.• current date and time.• time difference between the selected city and your city if you have set the local time (see below) or GMT (by default).
Organiser156To select your time zone:1. Select the city corresponding to your time zone by pressing the Left or Right key one or more times.The local date and time display.2. Press the Set soft key.4. When you have finished, press the soft key or the key to exit.Set format: allows you to change the time and date formats.Time format: 24 hours12 hoursDate format: DD/MM/YYYY (day/month/year) YYYY/MM/DD (year/month/day)3.To Selectupdate the current date/time with this new settingSet local.indicate that thetime zone iscurrently using the daylight saving timeSet DST. The icon is shown next to the time difference.indicate that the time zone is no longer using the daylight saving timeRemove DST (only available when the icon is shown next to the time difference).Organiser157Alarm This option allows you to set an alarm to ring at a specific time. You can set up to three alarms or set the phone to ring an alarm when it is switched off.To set an alarm:1. Select either Morning call, Alarm1 or Alarm2 by pressing the Up or Down key.The icon means that no alarm is currently set. The icon means that an alarm has already been set.2. Press the Select soft key.3. Press the Options soft key.4. Scroll to an option by pressing the Up or Down key and press the Select soft key. Change the setting, as needed.• Alarm day: place or remove a check mark on the day(s) of the week by pressing the Select soft key. If you want to set a daily alarm, select Everyday. If you want to set a temporary alarm, select Once alarm. When you press the Ok soft key after selecting, your phone asks you to enter the alarm time.• Alarm time: enter the time for the alarm to sound.• Alarm tone: select an alarm melody.• Remove alarm: deactivates the alarm.Note: The alert type of Alarm1 and 2 is affected by the alert type of incomming call. Moring call’s alert type is always melody.5. Repeat step 4 to change each setting.
Organiser1586. When you have finished, press the soft key or the key to exit.Once an alarm has been set, you can see the Alarm icon ( ) on the top line of the display. To stop the alarm when it rings, press any key.Note: When the Quiet Mode is activated, the alarm tone doesn’t sound. But When you set an Morning call, it sounds the alarm tone even if the Quiet Mode is activated.To set the alarm to ring even if your phone is switched off:1. Scroll to Auto power on the Alarm list and press the Select soft key. 2. If necessary, press the Up or Down key to select On.To turn the Auto Power feature off, select Off.3. Press the Select soft key to save the setting.4. When you have finished, press the soft key or the key to exit.Once you have activated the auto power alarm, a check mark appears ahead of Auto power. If the phone is switched off at the specified alarm time, it automatically switches on and rings the alarm. It then automatically switches off again.To turn off an alarm:• Press the Confirm soft key.• When the mornig call’s alarm tone sounds, press any key or the Snooze soft key to stop the alarm for five minutes, after which it will resume. You can do this a maximum of five times.Organiser159The snooze alarm tone sounds while the phone is switched off and the Auto power is set to on, and the Quiet Mode is activated. If you reset the moring call’s alarm time or deactivate the morning call’s alarm, the snooze alarm is cancelled.Calculator You can use the phone as a calculator. The calculator performs basic arithmetic functions, such as addition, subtraction, multiplication, division and remainder computation.To perform a calculation:1. Enter the first number using the number keys.Note: To erase any mistakes or clear the display, press the C key.2. Press the key to enter a decimal point (.) or the key to enter the appropriate arithmetic symbol: + (add), - (subtract), (multiply), / (divide), % (remainder), ( or ).3. Enter the second figure.4. Repeat steps 2 and 3, if necessary.5. Press the Equal soft key to view the result. The result appears in the Answer box.Note: The result is rounded to six decimal places.6. When you have finished, press the soft key or the key to exit.
Organiser160Conversion This menu option allows you to convert from one type of unit to another.To c onv ert a va lue:1. Scroll to the type of conversion to be performed from Length, Weight, Volume, Area and Temperature, and press the Select soft key.2. Enter the value to be converted and press the Down key to move to the From field. You can enter a decimal point (.) using the key. And you can enter a minus (-) using the key in Temperature.3. Select the original unit by pressing the Left or Right key and press the Down key to move to the To field. Refer to the table on the following page for the units available.4. Select the required unit by pressing the Left or Right key. 5. Press the Ok soft key or the key to view the result. The result appears in the Answer box.6. When you have finished, press the soft key or the key to exit.Organiser161Units availableTimer Using the Timer feature, you can set the phone to sound an alarm after a certain time.1. Press the Set soft key.2. Enter the length of time you want to count down in hours and minutes and press the Ok soft key.3. Press the Start soft key to start counting down.Even if you exit the Timer screen, the timer will continue running. After the specified time has expired, the phone informs you by playing a melody and displaying a text notification. Type UnitsLength mm cm mkm in ftyard mileWeight g kg tongrain oz pound Volume cm3 m3 lin3 ft3 yd3gal Area cm2 m2 ain2 ft2 yd2acreTemperature °C °F
Organiser162To stop the timer melody when it rings, press any key.To stop the timer before the end, press the Stop soft key on the Timer screen.Notes: • The timer uses power from the battery consequently, the phone’s operating time is reduced.• When the Quiet Mode is activated, there is no sound.Stopwatch The stopwatch can be used to measure times for various sports.Example: Running or swimming races Up to four stopwatches can be used.The precision of the stopwatch is one hundredth of a second. The maximum measurement time is 10 hours.1. To start the stopwatches, press the Ok soft key.2. When you wish to stop the first stopwatch, press the Ok soft key. Repeat this step for the other stopwatches.3. Press the Reset soft key to reset the watches.4. Press the C or key to exit.163CameraUsing the camera module embedded in your phone, you can take pictures for people or events while on the move. Additionally, you can send photos to other people in a picture message or as an e-mail attachment. The camera produces JPEG pictures.CAUTIONS:• Do not take photos of people without their permission.• Do not take photos in a place where cameras are not allowed.• Do not take photos in a place where you may interfere with another person’s privacy.Take photos This menu allows you to take a picture to send the photo as a picture message to other destinations. You can use the picture as a background and store it separately in My album folder.Taking a picture1. Slide the folder up.2. To access the Take photos menu directly, press the Up key in Idle Mode. And then press the Select soft key when Take photos highlights.To take pictures immediately in Idle Mode, press and hold the Up key.The image to be captured appears on the display.
Camera164The icons on the top line of the display indicate the size, quality, flash type and current mode (shown if you select the multi-shot mode or night mode). 3. Adjust the image by aiming the camera to the subject. To Press theadjust the brightness of the pictureLeft or Right key.zoom in or out the pictureUp or Down key.flip the picture up and downvolume up keyreverse the picture like a mirror imagevolume down keyturn the viewfinder’s frame on or off1 keychange the picture size2 keychange the picture quality3 keyselect the mode4 keyselect the effect5 keygo to the Settings menu6 keyselect the frame7 keyselect the delay time8 keygo to the My photos menu 9 keyCamera165For more information about these functions, see “Using the camera options” on page 166.4. Press the soft key to take a picture.The picture is automatically saved in the My photos (see page 169).When you press the Options soft key after taking a picture, the following options are available. Scroll the option you want by pressing the Up and Down keys and press the Select soft key:Send: allows you to send a multimedia message using the taken picture. For further details about sending multimedia messages, see page 114.Rename: allows you to rename the taken picture.switch the camera flash on or off (if you set the Manual option in the Flash light menu. See page 168, 171)0 key5. To Press theuse the optionsOptions soft key. For details about the options, see below.delete the picture fileDelete soft key.return to the capture mode to take another picture.C key.turn the camera offand return to Idle Mode key. To Press the
Camera166Go to my photos: allows you to see the taken pictures in the My photos (see page 169).Set as: allows you to set it as a wallpaper or a caller ID.Wallpaper: allows you to set it as a wallpaper.Caller ID: allows you to set it as a caller ID.Protection: allows you to protect the taken picture from deletion or not.Properties: this option shows you information about the picture, such as name, size, date, resolution, protection type and format.Using the camera optionsWhen you press the soft key in the capture mode, the following options are available for the current shot:Mode: You can take a picture in various modes. Once you change the mode, its indicator appears at the top left on the display.Normal shot: you can take a picture in the normal mode.Multi-shot: you can take action stills. Select speed and the number of pictures you want to take. When you press the soft key, the phone automatically takes and saves the pictures successively as many times as you set. The Mobile (128*120) size will be set by default.Note: The zoom control bar and the brigthness control bar do not display when you use the multi-shot mode.Camera167Night mode: this option allows you to take a picture of the best quality when it is dark.Capture only: you can take pictures without review.Frame: this option allows you to use a frame on the picture. Press the navigation key to find the frame format you want to use. You can preview the image with the frame format by using the Preview soft key. The Mobile (128*120) size will be set by default.Note: The zoom control bar and the brigthness control bar do not display when you use the frame.Effects: this option allows you to apply special effects to the picture. Press the Up or Down key to find the tone you want to use. Gray, Negative, Sepia, Emboss and Sketch are available. To deactivate the effect setting, select Off.Rotation: this option allows you to flip the image vertically or reverse it as a mirror image.Timer: you can select the delay time. When you press the capture key, the phone takes the picture after the specified time. When you exit the camera mode or select Off in the Timer menu, the timer is off.Settings: this option allows you to change the settings for taking a picture. And this option is synchronized with the Settings menu. See page 170.Photo size: sets the image size to one of VGA(640*480), QVGA(320*240), QQVGA(160*120) and Mobile(128*120). The selected image size displays on the capture screen.
Camera168Photo quality: allows you to select the image quality from Super fine, Fine, Normal, and Economy. The option you select appears on the top of the display.Shutter sound: allows you to select a sound when you press the shutter, the soft key.Note: This sound setting is not applied to the multi-shot sound.Flash light: allows you to set the camera flash to use automatically or not.• Manual: to switch the camera flash on or off, you have to press the 0 key in the capture mode.• Automatic: when you press the shutter, the soft key, the phone lights a flashlight. After a while the camera takes a picture and the flashlight go out.Default name: allows you to change the default prefix name of the picture.Help: this option shows you the functions of the navigation keys and the volume keys in the capture mode.Camera169My photos In this menu, you can review the pictures you have taken. My albums My Album allows you to store the pictures as your photo album. Select one of albums. It shows the pictures saved in the album. For details about viewing your pictures and using them, see page 169. To Press thescroll through the picturesnavigation keys.show the selected picture as an enlargementView soft key.go back to the multiple view modeMulti soft key.use the optionsOptions soft key. For details, see page 165.turn the camera offand return to Idle Mode key.
Camera170Delete all You can delete all the photos saved in each category.1. Scroll to a photo box and place a check mark ahead it by pressing the Select soft key.Selecting All places check marks on all of the photo boxes. If you want to delete the protected photos and the caller ID photos, select the With protected photos option and the With caller ID photos option.2. If necessary, repeat step 1 to check another box.3. When you have finished checking, press the Ok soft key. 4. When a confirming message appears, press the Yes soft key to delete all of the photos in the box(es).Otherwise, press the No soft key.Settings This menu option allows you to change the default settings of the options for using the camera feature.The following options are available:Photo size: sets the image size to one of VGA(640*480), QVGA(320*240), QQVGA(160*120) and Mobile(128*120). The selected image size displays on the capture screen.Camera171Photo quality: allows you to select the image quality from Super fine, Fine, Normal, and Economy. The option you select appears on the top of the display.Shutter sound: allows you to select a sound when you press the shutter, the soft key.Note: This sound setting is not applied to the Multi-shot sound.Flash light: allows you to set the camera flash to use automatically or not.Manual: to switch the camera flash on or off, you have to press the 0 key in the capture mode.Automatic: when you press the shutter, the soft key, the phone lights a flashlight. After a while the camera takes a picture and the flashlight go out.Default name: allows you to change the default prefix name of the picture.Memory statusCamera, Media box and multimedia message boxes share a given amount of memory in your phone.The display shows the status of free and used memory.You can see the used memory status of Camera, Media box and multimedia message boxes by pressing the Left or Right key.
172Phone settingsMany different features of your phone can be customised to suit your preferences via thePhone settings menu.Display You can change the background image and the colour of the components on the display according to your preference and needs.WallpaperThis option allows you to change the background image to be displayed in Idle Mode. The following options are available:Animations: allows you to select one of the animations.Photos: allows you to select one of the photos taken by the camera.Images: allows you to select one of the images in the Images in the Media box menu that are downloaded from the WAP sites, the EasyStudio PC software or multimedia messages. Text position: allows you to select the position of the text displayed on the idle screen, such as the operator’s name, current date and time, and text notifications of missed calls or new messages. Choose either Top or Bottom. If you set this option to Off, your phone displays only the wallpaper image.Phone settings173Text style: allows you to set the style of the text displayed on the idle screen.Note: When you set the wallpaper image to Calendar, the Text position and Text style options don’t work.Skin You can change the colour setting of the display components, such as soft key indications area or the menu names and icons. Backlight You can specify how long the phone uses the backlight. Select how long the backlight remains on after the last key is pressed.LCD brightness This option allows you to adjust the brightness of the display screens to make them lighter or darker.1. Adjust the contrast by using the Up and Down keys or the volume keys on the left side of the phone.2. When you are satisfied, press the Ok soft key to save the selection.Service display You can turn off the service display or change the time interval of the service display.
Phone settings174Greeting message This menu option allows you to set a greeting message to be displayed briefly when the phone is switched on.When you access this menu, the current message displays. For further information on how to enter text, see page 48.To Press theclear the existing messageC key and hold it down.enter a new messageappropriate alphanumeric keys.save your inputOk soft key.cancel your input and return to Idle Mode key.Phone settings175Security The security settings enable you to restrict the use of your phone to the people and types of calls of your choice.Various codes and passwords are used to protect the features of your phone. For more information, see page 187 -189.PIN check When the PIN Check feature is enabled, you must enter your PIN each time you switch the phone on. Consequently, any person who does not have your PIN cannot use your phone without your approval.Note: Before disabling the PIN Check feature, you must enter your PIN.The following options are available:Disable: the phone connects directly to the network when you switch it on.Enable: you must enter the PIN each time the phone is switched on.To change your PIN, see the Change PIN menu option below.Change PIN This feature allows you to change your current PIN to a new one, provided that the PIN Check feature is enabled. You must enter the current PIN before you can specify a new one. Once you have entered a new PIN, you are asked to confirm it by entering it again.
Phone settings176Phone lock When the Phone lock feature is enabled, the phone is locked and you must enter the 8-digit phone password each time the phone is switched on.The password is preset to “00000000” at the factory. To change the phone password, see the Change password menu option below.Once the correct password has been entered, you can use the phone until you switch it off.The following options are available:Disable: you are not asked to enter the phone password when you switch the phone on.Enable: you are required to enter the phone password when you switch the phone on.Change password The Change password feature allows you to change your current phone password to a new one. You must enter the current password before you can specify a new one.The password is preset to “00000000” at the factory. Once you have entered a new password, you are asked to confirm it by entering it again.Privacy This feature allows you to lock or unlock the usage of the contents, such as multimedia messages, photos, images and sounds.To enable or disable the Privacy feature, you must enter your phone password.Phone settings177SIM lock To enable the SIM lock feature, you must enter a new four- to eight-digit SIM lock code, and confirm it by entering it again. The following options are available:Disable: you can use any other SIM cards with your phone.Enable: you must enter the SIM lock code to use another SIM card with your phone.To unlock the SIM, enter the SIM lock code.FDN mode The FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict your outgoing calls to a limited set of phone numbers.The following options are available:Disable: you can phone any number.Enable: you can only call phone numbers stored in Phonebook. You must enter your PIN2.Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu option is not displayed.To change your PIN2, see the Change PIN2 menu option below.Change PIN2 The Change PIN2 feature allows you to change your current PIN2 to a new one. You must enter the current PIN2 before you can specify a new one.
Phone settings178Once you have entered a new PIN2, you are asked to confirm it by entering it again.Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu option is not displayed.Auto redial With the Auto Redial function, the phone makes up to ten attempts to redial a phone number after an unsuccessful call.Note: The interval between two call attempts varies.The following options are available:Off: the number is not redialled.On: the number is redialled automatically.Voiceclarity The voiceclarity feature makes received sound loud and clear during a call. It is useful when you are in a noisy place. The following options are available:Off: allows you turn off the this function.On: allows you turn on the this function.Phone settings179Slide down operation You can select the phone’s action when you slide the folder down.Stop operation: when you slide the folder down, the phone stops the current operation and locks the keypad automatically.Continue operation: when you slide the folder down, the phone performs the current operation continuously. But the confirming message to lock the keypad appears on the display in the Idle Mode.Active slide You can answer incoming calls by sliding the folder up or not.Off: you have to press a key to answer a call, depending on the setting of the Anykey answer option. See below.On: you can simply slide the folder up to answer a call.Anykey answer You can answer incoming calls by pressing anykey or not.Off: you can only press or the Accept soft key to answer incoming calls.On: you can press any key, except and the Reject soft key to answer incoming calls.
Phone settings180Fax mode You can use your phone as a modem for faxing when it is connected to computing devices. You need to purchase a data kit from your local Samsung dealer.In this menu, you can enable the fax mode on your phone.The following options are available:Off: you can send or receive data calls.On: you can send or receive fax calls.In any case you can send or receive voice calls. After connecting the phone to your computing device using the data cable and set this menu to On. Your phone works as a fax modem.For further details about setting and faxing through the phone on your computer, see the computers user’s manual.Infrared activation In this menu, you can activate or deactivate the infrared port.The following options are available:Off: deactivates infrared feature on the phone.On: activates the infrared feature on the phone. The IrDA icon ( ) appears on the top line of the display. Phone settings181If there is no communication between your phone and the IrDA-compliant device within 1 minute of activating the feature, it is automatically deactivated. Reset settings This menu option allows you to reset your phone to its default configuration. You can reset the sound settings, phone settings or all of the settings together.1. Select one of the settings to reset by pressing the Select soft key.2. When a confirming message appears, press the Yes soft key to reset settings. Then enter the phone password and press the Ok soft key.The password is preset to “00000000” by default. To change it, see page 176.Otherwise, press the No soft key.
182Using ALS (Alternate Line Service)The ALS feature enables two lines to be associated with one SIM card. Consequently, you can make and receive calls on either line. If you subscribe to this network service, a few additional menu options enable you to set up this feature.Note: Please contact your service provider to check the availability of this feature and how to subscribe to ALS.Selecting a line You can select a line for each call via the Active line menu option. For further details, refer to page 101.Editing the line nameYou can edit the name of each line via the Own number menu option.When you edit the name of a line, this name replaces “Line 1” or “Line 2”, as applicable. For further details, refer to page 73.Setting the ring typeTo distinguish between incoming calls on the two lines, you can select a different ring tone for each line via the Incoming calls menu option. For further details, see page 102.Using ALS (Alternate Line Service)183Setting call diverting optionsYou can set up call diverting via the Call diverting menu option. This service reroutes incoming calls on the line of your choice to a specified number. For further details, see page 94.Viewing call informationYou can view call times and last call cost information for each line. For further details, see page 92.
184Solving problemsBefore contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary service call.When you switch your phone on, the following messages may appearNo SIM cardCheck that the SIM card is correctly installed.Phone locked Enter passwordThe Phone lock feature is enabled. You must enter the phone’s password before you can use the phone.Enter PIN• You are using your phone for the first time. You must enter the Personal Identification Number supplied with the SIM card.• The PIN check feature is enabled. Every time the phone is switched on, you must enter the PIN. To disable this feature, use the PIN check menu option. See page 175.Enter PUKThe PIN was entered wrongly three times in succession and the phone is now blocked. Enter the PUK supplied by your network operator.Solving problems185“No service” displays• The network connection was lost. You may be in a weak reception area (in a tunnel or surrounded by buildings). Move and try again.• You are trying to access an option for which you have not taken out a subscription with your service provider. Contact the service provider for further details.You have entered a number but it was not dialled• Have you pressed the key?• Are you accessing the right cellular network?• You may have set an outgoing call barring option.Your correspondent cannot reach you• Is your phone switched on (the key pressed for more than one second)?• Are you accessing the right cellular network?• You may have set an incoming call barring option.Your correspondent cannot hear you speaking• Have you switched off the microphone (Mute appears)?• Are you holding the phone close enough to your mouth? The microphone is located at the bottom of the phone.
Solving problems186The phone starts beeping and “Battery Low” flashes on the displayThe battery is insufficiently charged. Replace the battery and recharge it.The audio quality of the call is poor• Check the signal strength indicator on the display ( ); the number of bars indicates the signal strength from strong ( ) to weak ( ).• Try moving the phone slightly or moving closer to a window if you are in a building.No number is dialled when you recall a Phonebook entry• Check that the number has been stored correctly, by using the Phonebook Search feature.• Re-store them, if necessary.If the above guidelines do not help you to solve the problem, take a note of:• the model and serial numbers of your phone•your warranty details• a clear description of the problemThen contact your local dealer or Samsung after-sales service.187Access codesThere are several access codes that are used by your phone and its SIM card. These codes help you protect the phone against unauthorised use.Some access codes can be changed using the Security menu option. See page 175 for further details.Phone passwordThe Phone lock feature (see page 176) uses the phone password to protect your phone against unauthorised use. The phone password is supplied with the phone and is preset to “00000000” at the factory. To change the password, use the Change password menu option. See page 176.PINThe PIN (Personal Identification Number) protects your SIM card against unauthorised use. It is usually supplied with the SIM card. When the PIN Check feature is enabled (see page 175), you must enter the PIN each time you switch on the phone.If you key in an incorrect PIN three times in succession, key in the PUK and press the Ok soft key to unlock the phone. Key in a new PIN and press the Ok soft key. Key in the new PIN again and press the Ok soft key.
Access codes188PIN2The PIN2, supplied with some SIM cards, is required to access some functions, such as charging unit counters. These functions are only available if supported by your SIM card.If you key in an incorrect PIN2 three times in succession, key in the PUK2 and press the Ok soft key to unlock the phone. Key in a new PIN2 and press the Ok soft key. Key in the new PIN2 again and press the Ok soft key.PUKThe PUK (PIN Unblocking Key) is required to change a blocked PIN. The PUK may be supplied with the SIM card. If not, contact your local service provider.If you key in an incorrect PUK ten times in succession, the SIM card cannot be used anymore. Contact your service provider for a new card.You cannot change the PUK. If you lose the code, contact your service provider.PUK2The PUK2, supplied with some SIM cards, is required to change a blocked PIN2.If you key in an incorrect PUK2 ten times in succession, you cannot use the functions requiring the PIN2. Contact your service provider for a new card.Access codes189You cannot change the PUK2. If you lose the code, contact your service provider.Call barring passwordThe 4-digit call barring password is required when you use the Call Barring function. You obtain the password from your service provider when you subscribe to this function. You can change this password using the Change barring password menu option. For further details, see page 98.
190Health and Safety InformationExposure to Radio Frequency (RF) SignalsYour wireless phone is a radio transmitter and receiver.It is designed and manufactured not to exceed theemission limits for exposure to radio frequency (RF)energy set by the Federal Communications Commission(FCC) of the U.S. Government. These limits are part ofcomprehensive guidelines and establish permittedlevels of RF energy for the general population. Theguidelines are based on the safety standards that weredeveloped by independent scientific organizationsthrough periodic and through evaluation of scientificstudies.The standards include a substantial safety margindesigned to assure the safety of all persons, regardlessof age and health.The exposure standard for wireless phones employs aunit of measurement known as Specific AbsorptionRate (SAR). The SAR limit set by the FCC is 1.6W/kg *.*In the U.S. and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg)averaged over one gram of tissue. The standard incorporates a substantial margin of safety to giveadditional protection for the public and to account for any variations in measurements.safety-end-NorthA 1/27/03 2:05 PM Page 125
192HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn193HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonnSAR tests are conducted using standard operating positions specified by the FCC with the phonetransmitting at its highest certified power level in alltested frequency bands. Although the SAR isdetermined at the highest certified power level, theactual SAR level of the phone while operating can bewell below the maximum value. This is because thephone is designed to operate at multiple power levelsso as to use only the power required to reach thenetwork. In general, the closer you are to a wirelessbase station antenna, the lower the power output ofthe phone. Before a new model phone is available for sale to thepublic, it must be tested and certified to the FCC thatit does not exceed the limit established by thegovernment-adopted requirement for safe exposure.The tests are performed in positions and locations(e.g., at the ear and worn on the body) as required bythe FCC for each model. While there may bedifferences between the SAR levels of various phonesand at various positions, they all meet the governmentrequirement.The FCC has granted an Equipment Authorization for thismodel phone with all reported SAR levels evaluated as incompliance with the FCC RF exposure guidelines. SARinformation on this model phone is on file with the FCCand can be found under the Display Grant section ofhttp://www.fcc.gov/oet/fccid after searching on FCC IDprinted in the label on the phone.FCC certification information for this model phone isattached separation paper.For Body OperationTo maintain compliance with FCC RF exposure require-ments, use only belt-clips, holsters or similar accessories that maintain a 1.5 cm. separation distance between the user's body and the back of the phone, including the antenna. The use of belt-clips, holsters and similar accessories should not contain metallic componentsin its assembly. The use of accessories that do notsatisfy these requirements may not comply with FCCRF exposure requirements, and should be avoided.For more Information concerning exposure to radiofrequency signals, see the following websites:Federal Communications Commission (FCC) http://www.fcc.gov/rfsafetyCellular Telecommunications Industry Association (CTIA):http://www.wow-com.comU.S.Food and Drug Administration (FDA) http://www.fda.gov/cdrh/consumerWorld Health Organization (WHO) http://www.who.int/peh-emf/ensafety-end-NorthA 1/27/03 2:05 PM Page 126
195HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn• Do not leave the battery in hot or cold places, suchas in a car in summer or winter conditions, as youwill reduce the capacity and lifetime of the battery.Always try to keep the battery at roomtemperature. A phone with a hot or cold batterymay temporarily not work, even when the batteryis fully charged. Li-ion batteries are particularlyaffected by temperatures below 0 °C (32 °F).• Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object (coin,clip or pen) causes a direct connection betweenthe + and – terminals of the battery (metal stripson the battery), for example when you carry aspare battery in a pocket or bag. Short-circuitingthe terminals may damage the battery or theobject causing the short-circuiting.• Dispose of used batteries in accordance with localregulations. Always recycle. Do not dispose ofbatteries in a fire.Road SafetyYour wireless phone gives you the powerful ability tocommunicate by voice, almost anywhere, anytime.But an important responsibility accompanies thebenefits of wireless phones, one that every usermust uphold.When driving a car, driving is your first responsibility.When using your wireless phone behind the wheel ofa car, practice good common sense and rememberthe following tips.194HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonnPrecautions When Using Batteries• Never use any charger or battery that is damaged inany way.• Use the battery only for its intended purpose.• If you use the phone near the network’s basestation, it uses less power; talk and standby timeare greatly affected by the signal strength on thecellular network and the parameters set by thenetwork operator.• Battery charging time depends on the remainingbattery charge and the type of battery and chargerused. The battery can be charged and dischargedhundreds of times, but it will gradually wear out.When the operation time (talk time and standbytime) is noticeably shorter than normal, it is time tobuy a new battery.• If left unused, a fully charged battery will dischargeitself over time.• Use only Samsung-approved batteries and rechargeyour battery only with Samsung-approved chargers.When a charger is not in use, disconnect it from thepower source. Do not leave the battery connected toa charger for more than a week, since overchargingmay shorten its life.• Extreme temperatures will affect the chargingcapacity of your battery: it may require cooling orwarming first.safety-end-NorthA 1/27/03 2:05 PM Page 128
197HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn196HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn7. Do not engage in stressful or emotionalconversations that may be distracting. Make thepeople with whom you are talking aware that youare driving and suspend conversations that havethe potential to divert your attention from theroad.8. Use your wireless phone to call for help. Dial theemergency number in the case of fire, trafficaccident or medical emergencies. Remember, it isa free call on your wireless phone!9. Use your wireless phone to help others inemergencies. If you see a car accident, crime inprogress or other serious emergency where livesare in danger, call the emergency number, as youwould want others to do for you.10. Call roadside assistance or a special non-emergency wireless assistance number whennecessary. If you see a broken-down vehicleposing no serious hazard, a broken traffic signal,a minor traffic accident where no one appearsinjured, or a vehicle you know to be stolen, callroadside assistance or any other special non-emergency wireless number.1. Get to know your wireless phone and its features,such as speed dial and redial. If available, thesefeatures help you to place your call without takingyour attention off the road.2. When available, use a hands-free device. Ifpossible, add an extra layer of convenience andsafety to your wireless phone with one of themany hands-free accessories available today.3. Position your wireless phone within easy reach. Beable to access your wireless phone withoutremoving your eyes from the road. If you get anincoming call at an inconvenient time, let yourvoice mail answer it for you.4. Let the person you are speaking with know you aredriving; if necessary, suspend the call in heavytraffic or hazardous weather conditions. Rain,sleet, snow, ice and even heavy traffic can behazardous.5. Do not take notes or look up phone numbers whiledriving. Jotting down a To Do list or flippingthrough your phonebook takes your attention awayfrom your primary responsibility, driving safely.6. Dial sensibly and assess the traffic; if possible,place calls when you are not moving or beforepulling into traffic. Try to plan calls when your carwill be stationary. If you need to make a call whilemoving, dial only a few numbers, check the roadand your mirrors, then continue.safety-end-NorthA 1/27/03 2:05 PM Page 130
199HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn198HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonnWireless Technology Research.Persons with pacemakers:• Should always keep the phone more than 15 cm (6inches) from their pacemaker when the phone isswitched on• Should not carry the phone in a breast pocket• Should use the ear opposite the pacemaker tominimize potential interferenceIf you have any reason to suspect that interference istaking place, switch off your phone immediately.Hearing AidsSome digital wireless phones may interfere withsome hearing aids. In the event of such interference,you may wish to consult your hearing aidmanufacturer to discuss alternatives.Other Medical DevicesIf you use any other personal medical devices,consult the manufacturer of your device to determineif it is adequately shielded from external RF energy.Your physician may be able to assist you in obtainingthis information. Switch off your phone in health carefacilities when any regulations posted in these areasinstruct you to do so. Hospitals or health carefacilities may be using equipment that could besensitive to external RF energy.VehiclesRF signals may affect improperly installed orinadequately shielded electronic systems in motorvehicles. Check with the manufacturer or itsOperating EnvironmentRemember to follow any special regulations in forcein any area and always switch off your phonewhenever it is forbidden to use it, or when it maycause interference or danger.When connecting the phone or any accessory toanother device, read its user’s guide for detailedsafety instructions. Do not connect incompatibleproducts.As with other mobile radio transmitting equipment,users are advised that for the satisfactory operationof the equipment and for the safety of personnel, it isrecommended that the equipment should only beused in the normal operating position (held to your ear with the antenna pointing over your shoulder).Electronic DevicesMost modern electronic equipment is shielded fromradio frequency (RF) signals. However, certainelectronic equipment may not be shielded againstthe RF signals from your wireless phone. Consult themanufacturer to discuss alternatives.PacemakersPacemaker manufacturers recommend that aminimum distance of 15 cm (6 inches) be maintainedbetween a wireless phone and a pacemaker to avoidpotential interference with the pacemaker. Theserecommendations are consistent with theindependent research and recommendations ofsafety-end-NorthA 1/27/03 2:05 PM Page 132
201HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn200HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonnEmergency CallsThis phone, like any wireless phone, operates usingradio signals, wireless and landline networks as wellas user-programmed functions, which cannot guaranteeconnection in all conditions. Therefore, you shouldnever rely solely on any wireless phone for essentialcommunications (medical emergencies, for example).Remember, to make or receive any calls the phonemust be switched on and in a service area withadequate signal strength. Emergency calls may not bepossible on all wireless phone networks or whencertain network services and/or phone features are inuse. Check with local service providers.To make an emergency call, proceed as follows.1. If the phone is not on, switch it on.2. Key in the emergency number for your present location. Emergency numbers vary by location.3. Press the <SEND> key.If certain features are in use (call barring, for example),you may first need to deactivate those features beforeyou can make an emergency call. Consult thisdocument and your local cellular service provider.When making an emergency call, remember to give allthe necessary information as accurately as possible.Remember that your phone may be the only means ofcommunication at the scene of an accident; do not cutoff the call until given permission to do so.representative regarding your vehicle.You should also consult the manufacturer of anyequipment that has been added to your vehicle.Posted FacilitiesSwitch off your phone in any facility where postednotices require you to do so.Potentially Explosive AtmospheresSwitch off your phone when in any area with apotentially explosive atmosphere and obey all signsand instructions. Sparks in such areas could cause anexplosion or fire resulting in bodily injury or evendeath.Users are advised to switch off the phone while at arefueling point (service station). Users are remindedof the need to observe restrictions on the use ofradio equipment in fuel depots (fuel storage anddistribution areas), chemical plants or where blastingoperations are in progress.Areas with a potentially explosive atmosphere areoften but not always clearly marked. They includebelow deck on boats, chemical transfer or storagefacilities, vehicles using liquefied petroleum gas(such as propane or butane), areas where the aircontains chemicals or particles, such as grain, dustor metal powders, and any other area where youwould normally be advised to turn off your vehicleengine.safety-end-NorthA 1/27/03 2:05 PM Page 134
203HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn202HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonnCare and MaintenanceYour phone is a product of superior design andcraftsmanship and should be treated with care. Thesuggestions below will help you fulfill any warrantyobligations and allow you to enjoy this product formany years. • Keep the phone and all its parts and accessoriesout of the reach of small children’s.• Keep the phone dry. Precipitation, humidity andliquids contain minerals that will corrodeelectronic circuits.• Do not touch the phone with a wet hand while it ischarging. Doing so may cause an electric shock toyou or damage to the phone. • Do not use or store the phone in dusty, dirty areas,as its moving parts may be damaged.• Do not store the phone in hot areas. Hightemperatures can shorten the life of electronicdevices, damage batteries, and warp or meltcertain plastics.• Do not store the phone in cold areas. When thephone warms up to its normal operatingtemperature, moisture can form inside the phone,which may damage the phone’s electronic circuitboards.Other Important Safety Information• Only qualified personnel should service the phone orinstall the phone in a vehicle. Faulty installation orservice may be dangerous and may invalidate anywarranty applicable to the device.• Check regularly that all wireless phone equipment inyour vehicle is mounted and operating properly.• Do not store or carry flammable liquids, gases orexplosive materials in the same compartment as thephone, its parts or accessories.• For vehicles equipped with an air bag, rememberthat an air bag inflates with great force. Do notplace objects, including both installed or portablewireless equipment in the area over the air bag or inthe air bag deployment area. If wireless equipmentis improperly installed and the air bag inflates,serious injury could result.• Switch off your phone before boarding an aircraft.The use of wireless phones in aircraft may bedangerous to the operation of the aircraft, and isillegal.• Failure to observe these instructions may lead to thesuspension or denial of telephone services to theoffender, or legal action, or both.safety-end-NorthA 1/27/03 2:05 PM Page 136
205HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn204HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn• Do not drop, knock or shake the phone. Roughhandling can break internal circuit boards.• Do not use harsh chemicals, cleaning solvents orstrong detergents to clean the phone. Wipe it with asoft cloth slightly dampened in a mild soap-and-watersolution.• Do not paint it. Paint can clog the device’s movingparts and prevent proper operation.• Do not put the phone in or on heating devices, such asa microwave oven, a stove or a radiator. The phonemay explode when overheated.• Use only the supplied or an approved replacementantenna. Unauthorized antennas or modifiedaccessories may damage the phone and violateregulations governing radio devices.• If the phone, battery, charger or any accessory is notworking properly, take it to your nearest qualifiedservice facility. The personnel there will assist you,and if necessary, arrange for service.Acknowledging Special Precautions and the FCCand Industry Canada NoticeCautionsModifications not expressly approved by the partyresponsible for compliance could void the user's authorityto operate the equipment. FCC Compliance InformationThis device complies with Part 15 of FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received.Including interference that may cause undesiredoperation.Information to UserThis equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to part 15of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used inaccordance with the instructions, may cause harmfulinterference to radio communications. However, there isno guarantee that interference will not occur in aparticular installation. If this equipment does causeharmful interference to radio or television reception,which can be determined by turning the equipment off andon, the user is encouraged to try to correct theinterference by one or more of the following measures: safety-end-NorthA 1/27/03 2:05 PM Page 138
207AAppppeennddiixxAppendix A: CERTIFICATION INFORMATION (SAR)THIS MODEL PHONE MEETS THE GOVERNMENT’SREQUIREMENTS FOR EXPOSURE TO RADIO WAVES.Your wireless phone is a radio transmitter and receiver.It is designed and manufactured not to exceed theemission limits for exposure to radio frequency(RF)energy set by the Federal Communications Commissionof the U.S. Government. These limits are part ofcomprehensive guidelines and establish permittedlevels of RF energy for the general population. Theguidelines are based on safety standards that weredeveloped by independent scientific organizationsthrough periodic and thorough evaluation of scientificstudies. The standards include a substantial safetymargin designed to assure the safety of all persons,regardless of age and health. The exposure standard for wireless mobile phonesemploys a unit of measurement known as the SpecificAbsorption Rate(SAR). The SAR limit set by the FCC is1.6 W/kg. SAR Tests are conducted using standardoperating positions accepted by the FCC with thephone transmitting at its highest certified power levelin all tested frequency bands. Although the SAR isdetermined at the highest certified power level, theactual SAR level of the phone while operating can bewell below the maximum value. This is because thephone is designed to operate at multiple power levelsso as to use only the power required to reach thenetwork. In general, the closer you are to a wirelessbase station antenna, the lower the power output.206HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/ TV technician for help.safety-end-NorthA 1/27/03 2:05 PM Page 140
209Appendix B: Guide to Safe and Responsible WirelessPhone UseCellular Telecommunications & Internet Association“Safety is the most important call you will ever make.”A Guide to Safe and Responsible Wireless Phone UseTENS OF MILLIONS OF PEOPLE IN THE U.S. TODAY TAKEADVANTAGE OF THE UNIQUE COMBINATION OFCONVENIENCE, SAFETY AND VALUE DELIVERED BY THEWIRELESS TELEPHONE. QUITE SIMPLY, THE WIRELESSPHONE GIVES PEOPLE THE POWERFUL ABILITY TOCOMMUNICATE BY VOICE-ALMOST ANYWHERE,ANYTIME-WITH THE BOSS, WITH A CLIENT, WITH THEKIDS, WITH EMERGENCY PERSONNEL OR EVEN WITHTHE POLICE. EACH YEAR, AMERICANS MAKE BILLIONSOF CALLS FROM THEIR WIRELESS PHONES, AND THENUMBERS ARE RAPIDLY GROWING. But an important responsibility accompanies thosebenefits, one that every wireless phone user mustuphold. When driving a car, driving is your firstresponsibility. A wireless phone can be an invaluabletool, but good judgment must be exercised at all timeswhile driving a motor vehicle-whether on the phone ornot. The basic lessons are ones we all learned as teenagers.Driving requires alertness, caution and courtesy. Itrequires a heavy dose of basic common sense-keep yourhead up, keep your eyes on the road, check your mirrorsfrequently and watch out for other drivers. It requiresobeying all traffic signs and signals and staying withinthe speed limit. It means using seatbelts and requiringother passengers to do the same. 208Before a new model phone is available for sale to thepublic, it must be tested and certified to the FCC that itdoes not exceed the limit established by the government-adopted requirement for safe exposure. The tests areperformed in positions and locations(e.g., at the ear andworn on the body) as required by the FCC for eachmodel. The highest SAR values for this model phone as reportedto the FCC are Head: 0.202W/Kg, Body-worn: 0.433W/Kg,PTT:0.074W/Kg The FCC has granted an Equipment Authorization for thismodel phone with all reported SAR levels evaluated asin compliance with the FCC RF exposure guidelines. SARinformation on this model phone is on file with the FCCand can be found under the Display Grant section ofhttp://www.fcc.gov/oet/fccid after searching on FCC IDA3LSGHE820N.In the United States and Canada, the SAR limit formobile phones used by the public is 1.6watts/kilogram(W/kg) averaged over one gram of tissue.The standard incorporates a substantial margin of safetyto give additional protection for the public and toaccount for any variations in measurements. AAppppeennddiixxAAppppeennddiixxsafety-end-NorthA 1/27/03 2:05 PM Page 142
2114. Suspend conversations during hazardous drivingconditions or situations. Let the person you are speakingwith know you are driving; if necessary, suspend the callin heavy traffic or hazardous weather conditions. Rain,sleet, snow and ice can be hazardous, but so is heavytraffic. As a driver, your first responsibility is to payattention to the road. 5. Do not take notes or look up phone numbers whiledriving. If you are reading an address book or businesscard, or writing a “to do” list while driving a car, you arenot watching where you are going. It’s common sense.Don’t get caught in a dangerous situation because youare reading or writing and not paying attention to theroad or nearby vehicles. 6. Dial sensibly and assess the traffic; if possible, placecalls when you are not moving or before pulling intotraffic. Try to plan your calls before you begin your trip orattempt to coincide your calls with times you may bestopped at a stop sign, red light or otherwise stationary.But if you need to dial while driving, follow this simpletip-dial only a few numbers, check the road and yourmirrors, then continue. 7. Do not engage in stressful or emotional conversationsthat may be distracting. Stressful or emotionalconversations and driving do not mix-they are distractingand even dangerous when you are behind the wheel of acar. Make people you are talking with aware you aredriving and if necessary, suspend conversations whichhave the potential to divert your attention from the road. 210But with wireless phone use, driving safely means alittle more. This brochure is a call to wireless phoneusers everywhere to make safety their first priority whenbehind the wheel of a car. Wireless telecommunicationsis keeping us in touch, simplifying our lives, protecting usin emergencies and providing opportunities to helpothers in need. When it comes to the use of wirelessphones, safety is your most important call. Wireless Phone “Safety Tips” Below are safety tips to follow while driving and using awireless phone which should be easy to remember.1. Get to know your wireless phone and its features suchas speed dial and redial. Carefully read your instructionmanual and learn to take advantage of valuable featuresmost phones offer, including automatic redial andmemory. Also, work to memorize the phone keypad soyou can use the speed dial function without taking yourattention off the road. 2. When available, use a hands free device. A number ofhands free wireless phone accessories are readilyavailable today. Whether you choose an installedmounted device for your wireless phone or a speakerphone accessory, take advantage of these devices ifavailable to you. 3. Position your wireless phone within easy reach. Makesure you place your wireless phone within easy reachand where you can grab it without removing your eyesfrom the road. If you get an incoming call at aninconvenient time, if possible, let your voice mail answerit for you. AAppppeennddiixxAAppppeennddiixxsafety-end-NorthA 1/27/03 2:05 PM Page 144
2128. Use your wireless phone to call for help. Your wirelessphone is one of the greatest tools you can own toprotect yourself and your family in dangerous situations-with your phone at your side, help is only three numbersaway. Dial 9-1-1 or other local emergency number in thecase of fire, traffic accident, road hazard or medicalemergency. Remember, it is a free call on your wirelessphone! 9. Use your wireless phone to help others inemergencies. Your wireless phone provides you a perfectopportunity to be a “Good Samaritan” in your community.If you see an auto accident, crime in progress or otherserious emergency where lives are in danger, call 9-1-1or other local emergency number, as you would wantothers to do for you. 10. Call roadside assistance or a special wireless non-emergency assistance number when necessary. Certainsituations you encounter while driving may requireattention, but are not urgent enough to merit a call foremergency services. But you still can use your wirelessphone to lend a hand. If you see a broken-down vehicleposing no serious hazard, a broken traffic signal, a minortraffic accident where no one appears injured or avehicle you know to be stolen, call roadside assistanceor other special non-emergency wireless number.Careless, distracted individuals and people drivingirresponsibly represent a hazard to everyone on the road.Since 1984, the Cellular Telecommunications IndustryAssociation and the wireless industry have conductededucational outreach to inform wireless phone users of213their responsibilities as safe drivers and good citizens.As we approach a new century, more and more of us willtake advantage of the benefits of wireless telephones.And, as we take to the roads, we all have aresponsibility to drive safely.“The wireless industry reminds you to use your phonesafely when driving.”Cellular Telecommunications & Internet AssociationFor more information, please call 1-888-901-SAFE. For updates: http://www.wow-com.com/consumer/issues/driving/articles.cfm?ID=85AAppppeennddiixxAAppppeennddiixxsafety-end-NorthA 1/27/03 2:05 PM Page 146
215low level RF that does not produce heating effectscauses no known adverse health effects. Many studiesof low level RF exposures have not found any biologicaleffects. Some studies have suggested that somebiological effects may occur, but such findings have notbeen confirmed by additional research. In some cases,other researchers have had difficulty in reproducingthose studies, or in determining the reasons forinconsistent results.3. What is FDA’s role concerning the safety of wirelessphones?Under the law, FDA does not review the safety ofradiation-emitting consumer products such as wirelessphones before they can be sold, as it does with newdrugs or medical devices. However, the agency hasauthority to take action if wireless phones are shown toemit radiofrequency energy (RF) at a level that ishazardous to the user. In such a case, FDA could requirethe manufacturers of wireless phones to notify users ofthe health hazard and to repair, replace or recall thephones so that the hazard no longer exists.Although the existing scientific data do not justify FDAregulatory actions, FDA has urged the wireless phoneindustry to take a number of steps, including thefollowing:Support needed research into possible biological effectsof RF of the type emitted by wireless phones; Design wireless phones in a way that minimizes any RFexposure to the user that is not necessary for devicefunction; and Cooperate in providing users of wireless phones with the214Appendix C: Consumer Update on Wireless PhonesU.S. Food and Drug Administration1. What kinds of phones are the subject of this update?The term wireless phone refers here to hand-heldwireless phones with built-in antennas, often called cell,mobile, or PCS phones. These types of wireless phonescan expose the user to measurable radiofrequencyenergy (RF) because of the short distance between thephone and the user s head. These RF exposures arelimited by Federal Communications Commission safetyguidelines that were developed with the advice of FDAand other federal health and safety agencies. When thephone is located at greater distances from the user, theexposure to RF is drastically lower because a person’s RFexposure decreases rapidly with increasing distancefrom the source. The so-called “cordless phones,” whichhave a base unit connected to the telephone wiring in ahouse, typically operate at far lower power levels, andthus produce RF exposures well within the FCC’scompliance limits.2. Do wireless phones pose a health hazard?The available scientific evidence does not show that anyhealth problems are associated with using wirelessphones. There is no proof, however, that wireless phonesare absolutely safe. Wireless phones emit low levels ofradiofrequency energy (RF) in the microwave range whilebeing used. They also emit very low levels of RF when inthe stand-by mode. Whereas high levels of RF canproduce health effects (by heating tissue), exposure toAAppppeennddiixxAAppppeennddiixxsafety-end-NorthA 1/27/03 2:05 PM Page 148
2174. What is FDA doing to find out more about the possiblehealth effects of wireless phone RF?FDA is working with the U.S. National ToxicologyProgram and with groups of investigators around theworld to ensure that high priority animal studies areconducted to address important questions about theeffects of exposure to radiofrequency energy (RF).FDA has been a leading participant in the World HealthOrganization International Electromagnetic Fields (EMF)Project since its inception in 1996. An influential resultof this work has been the development of a detailedagenda of research needs that has driven theestablishment of new research programs around theworld. The Project has also helped develop a series ofpublic information documents on EMF issues.FDA and the Cellular Telecommunications & InternetAssociation (CTIA) have a formal Cooperative Researchand Development Agreement (CRADA) to do research onwireless phone safety. FDA provides the scientificoversight, obtaining input from experts in government,industry, and academic organizations. CTIA-fundedresearch is conducted through contracts to independentinvestigators. The initial research will include bothlaboratory studies and studies of wireless phone users.The CRADA will also include a broad assessment ofadditional research needs in the context of the latestresearch developments around the world.5. What steps can I take to reduce my exposure toradiofrequency energy from my wireless phone?216best possible information on possible effects of wirelessphone use on human health FDA belongs to an interagency working group of thefederal agencies that have responsibility for differentaspects of RF safety to ensure coordinated efforts at thefederal level. The following agencies belong to thisworking group:National Institute for Occupational Safety and Health Environmental Protection Agency Federal Communications Commission Occupational Safety and Health Administration National Telecommunications and InformationAdministration The National Institutes of Health participates in someinteragency working group activities, as well.FDA shares regulatory responsibilities for wirelessphones with the Federal Communications Commission(FCC). All phones that are sold in the United States mustcomply with FCC safety guidelines that limit RF exposure.FCC relies on FDA and other health agencies for safetyquestions about wireless phones.FCC also regulates the base stations that the wirelessphone networks rely upon. While these base stationsoperate at higher power than do the wireless phonesthemselves, the RF exposures that people get from thesebase stations are typically thousands of times lower thanthose they can get from wireless phones. Base stationsare thus not the primary subject of the safety questionsdiscussed in this document.AAppppeennddiixxAAppppeennddiixxsafety-end-NorthA 1/27/03 2:05 PM Page 150
219Some groups sponsored by other national governmentshave advised that children be discouraged from usingwireless phones at all. For example, the government inthe United Kingdom distributed leaflets containing sucha recommendation in December 2000. They noted that noevidence exists that using a wireless phone causes braintumors or other ill effects. Their recommendation to limitwireless phone use by children was strictlyprecautionary; it was not based on scientific evidencethat any health hazard exists.7. Do hands-free kits for wireless phones reduce risksfrom exposure to RF emissions?Since there are no known risks from exposure to RFemissions from wireless phones, there is no reason tobelieve that hands-free kits reduce risks. Hands-free kitscan be used with wireless phones for convenience andcomfort. These systems reduce the absorption of RFenergy in the head because the phone, which is thesource of the RF emissions, will not be placed againstthe head. On the other hand, if the phone is mountedagainst the waist or other part of the body during use,then that part of the body will absorb more RF energy.Wireless phones marketed in the U.S. are required tomeet safety requirements regardless of whether they areused against the head or against the body. Eitherconfiguration should result in compliance with the safetylimit.8. Do wireless phone accessories that claim to shield thehead from RF radiation work?218If there is a risk from these products—and at this pointwe do not know that there is—it is probably very small.But if you are concerned about avoiding even potentialrisks, you can take a few simple steps to minimize yourexposure to radiofrequency energy (RF). Since time is akey factor in how much exposure a person receives,reducing the amount of time spent using a wirelessphone will reduce RF exposure.If you must conduct extended conversations by wirelessphone every day, you could place more distance betweenyour body and the source of the RF, since the exposurelevel drops off dramatically with distance. For example,you could use a headset and carry the wireless phoneaway from your body or use a wireless phone connectedto a remote antenna Again, the scientific data do not demonstrate thatwireless phones are harmful. But if you are concernedabout the RF exposure from these products, you can usemeasures like those described above to reduce your RFexposure from wireless phone use.6. What about children using wireless phones?The scientific evidence does not show a danger to usersof wireless phones, including children and teenagers. Ifyou want to take steps to lower exposure toradiofrequency energy (RF), the measures describedabove would apply to children and teenagers usingwireless phones. Reducing the time of wireless phoneuse and increasing the distance between the user andthe RF source will reduce RF exposure.AAppppeennddiixxAAppppeennddiixxsafety-end-NorthA 1/27/03 2:05 PM Page 152
221FDA has tested hearing aids for interference fromhandheld wireless phones and helped develop avoluntary standard sponsored by the Institute ofElectrical and Electronic Engineers (IEEE). This standardspecifies test methods and performance requirements forhearing aids and wireless phones so that that nointerference occurs when a person uses a compatiblephone and a compatible hearing aid at the same time.This standard was approved by the IEEE in 2000.FDA continues to monitor the use of wireless phones forpossible interactions with other medical devices. Shouldharmful interference be found to occur, FDA will conducttesting to assess the interference and work to resolvethe problem.10. What are the results of the research done already?The research done thus far has produced conflictingresults, and many studies have suffered from flaws intheir research methods. Animal experimentsinvestigating the effects of radiofrequency energy (RF)exposures characteristic of wireless phones have yieldedconflicting results that often cannot be repeated in otherlaboratories. A few animal studies, however, havesuggested that low levels of RF could accelerate thedevelopment of cancer in laboratory animals. However,many of the studies that showed increased tumordevelopment used animals that had been geneticallyengineered or treated with cancer-causing chemicals soas to be pre-disposed to develop cancer in the absenceof RF exposure. Other studies exposed the animals to RFfor up to 22 hours per day. These conditions are notsimilar to the conditions under which people usewireless phones, so we don t know with certainty what220Since there are no known risks from exposure to RFemissions from wireless phones, there is no reason tobelieve that accessories that claim to shield the headfrom those emissions reduce risks. Some products thatclaim to shield the user from RF absorption use specialphone cases, while others involve nothing more than ametallic accessory attached to the phone. Studies haveshown that these products generally do not work asadvertised. Unlike “hand-free” kits, these so-called“shields” may interfere with proper operation of thephone. The phone may be forced to boost its power tocompensate, leading to an increase in RF absorption. InFebruary 2002, the Federal trade Commission (FTC)charged two companies that sold devices that claimed toprotect wireless phone users from radiation with makingfalse and unsubstantiated claims. According to FTC,these defendants lacked a reasonable basis tosubstantiate their claim.9. What about wireless phone interference with medicalequipment?Radiofrequency energy (RF) from wireless phones caninteract with some electronic devices. For this reason,FDA helped develop a detailed test method to measureelectromagnetic interference (EMI) of implanted cardiacpacemakers and defibrillators from wireless telephones.This test method is now part of a standard sponsored bythe Association for the Advancement of Medicalinstrumentation (AAMI). The final draft, a joint effort byFDA, medical device manufacturers, and many othergroups, was completed in late 2000. This standard willallow manufacturers to ensure that cardiac pacemakersand defibrillators are safe from wireless phone EMI.AAppppeennddiixxAAppppeennddiixxsafety-end-NorthA 1/27/03 2:05 PM Page 154
223222the results of such studies mean for human health.Three large epidemiology studies have been publishedsince December 2000. Between them, the studiesinvestigated any possible association between the use ofwireless phones and primary brain cancer, glioma,meningioma, or acoustic neuroma, tumors of the brain orsalivary gland, leukemia, or other cancers. None of thestudies demonstrated the existence of any harmfulhealth effects from wireless phone RF exposures.However, none of the studies can answer questionsabout long-term exposures, since the average period ofphone use in these studies was around three years.11. What research is needed to decide whether RFexposure from wireless phones poses a health risk?A combination of laboratory studies and epidemiologicalstudies of people actually using wireless phones wouldprovide some of the data that are needed. Lifetimeanimal exposure studies could be completed in a fewyears. However, very large numbers of animals would beneeded to provide reliable proof of a cancer promotingeffect if one exists. Epidemiological studies can providedata that is directly applicable to human populations, but10 or more years follow-up may be needed to provideanswers about some health effects, such as cancer. Thisis because the interval between the time of exposure toa cancer-causing agent and the time tumors develop - ifthey do - may be many, many years. The interpretation ofepidemiological studies is hampered by difficulties inmeasuring actual RF exposure during day-to-day use ofwireless phones. Many factors affect this measurement,such as the angle at which the phone is held, or whichmodel of phone is used.12. Which other federal agencies have responsibilitiesrelated to potential RF health effects?Additional information on the safety of RF exposures fromvarious sources can be obtained from the followingorganizations.FCC RF Safety Program: http://www.fcc.gov/oet/rfsafety/Environmental Protection Agency (EPA): http://www.epa.gov/radiation/ Occupational Safety and Health Administration’s (OSHA): http://www.osha-slc.gov/SLTC/radiofrequencyradiation/index.htmlNational Institute for Occupational Safety and Health(NIOSH): http://www.cdc.gov/niosh/emfpg.htmlWorld health Organization (WHO): http://www.who.int/peh-emf/ International Commission on Non-Ionizing RadiationProtection: http://www.icnirp.deNational Radiation Protection Board (UK): http://www.nrpb.org.uk Updated 4/3/2002: US Food and Drug Administrationhttp://www.fda.gov/cellphonesAAppppeennddiixxAAppppeennddiixxsafety-end-NorthA 1/27/03 2:05 PM Page 156
224GlossaryTo help you understand the main technical terms and abbreviations used in this booklet and take full advantage of the features of your mobile phone, here are a few definitions.ALS (Alternate Line Service)Capability of associating two lines with one SIM card. With this service, you can make and receive calls on either line, as required.Call barringAbility to restrict outgoing and incoming calls.Call divertingAbility to reroute calls to another number.Call holdingAbility to put one call on standby while answering or making another call; you can then switch between the two calls, as required.Call waitingAbility to inform users that they have an incoming call when engaged on another call.CLI (Caller Line Identification) servicesServices allowing subscribers to view or block the telephone numbers of callers.Glossary225EMS (Enhanced Message Service)Network service sending and receiving messages that include images, sounds and animations to and from another user without having to speak to the correspondent.GPRS (General Packet Radio Service)New non-voice value-added service that allows information to be sent and received across a mobile telephone network. GPRS guaranties continuous connection to the Internet for mobile phone and computer users. It is based on the Global System for Mobile Communication (GSM) circuit-switched cellular phone connections and the Short Message Service (SMS).GSM (Global System for Mobile communication)International standard for cellular communication, guaranteeing compatibility between the various network operators. GSM covers most European countries and many other parts of the world.IrDA (Infrared Data Association)A standard defined by the IrDA consortium. It specifies a way to wirelessly transfer data via infrared radiation. The IrDA specifications include standards for both the physical devices and the protocols they use to communicate with each other.MMS (Multimedia Message Service)A message service for the mobile environment, standardized by the WAP Forum and the 3rd Generation Partnership Program (3GPP). For phone
Glossary226users, MMS is similar to Short Message Service (SMS)-it provides automatic, immediate delivery of user-created content from phone to phone. The message addressing used is primarily phone numbers, thus the traffic goes from phone to phone. MMS also provides support for e-mail addressing, so that messages can also be sent by e-mail. In addition to the text content of SMS, MMS messages can contain still images, voice or audio clips, and later also video clips and presentation information.Multiparty callingAbility to establish a conference call involving up to five additional parties.PIN (Personal Identification Number)Security code that protects the phone/SIM against unauthorised use. The PIN is supplied by the service provider with the SIM card. It may be a four to eight-digit number and can be changed, as required.PUK (PIN Unblocking Key)Security code used to unlock the phone when an incorrect PIN has been entered three times in succession. The eight-digit number is supplied by the service provider with the SIM card.RoamingUse of your phone when you are outside your home area (when travelling for example).Glossary227SDN (Service Dialling Numbers)Telephone numbers supplied by your network provider and giving access to special services, such as voice mail, directory inquiries, customer support and emergency services.SIM (Subscriber Identification Module)Card containing a chip with all the information required to operate the phone (network and memory information, as well as the subscriber’s personal data). The SIM card fits into a small slot on the back of the phone and is protected by the battery.SMS (Short Message Service)Network service sending and receiving messages to and from another subscriber without having to speak to the correspondent. The message created or received can be displayed, received, edited or sent.Soft keysTwo keys marked and on the phone, the purpose of which:• varies according to the function that you are currently using• is indicated on the bottom line of the display just above the corresponding keyVoice mailComputerised answering service that automatically answers your calls when you are not available, plays a greeting (optionally in your own voice) and records a message.
228IndexAABC mode • 48, 52Access codes • 187Accessories • 13Active lineselect • 101service, use • 182Alarm, set • 157Alert type • 103ALS • 182Autopower alarm • 158Bbackground image, set • 172Backlight • 20Barringcalls • 96Batterycharging • 25installing • 23low battery indicator • 26precautions • 191removing • 24Broadcast • 128Browser, WAP • 134CCalculator • 159Calendar • 151Callergroups • 74ID • 101Callsalert type • 103answering • 35a second call • 41barring • 96costs • 92dialled • 91diverting • 94emergency • 196ending • 34holding • 40international • 32log • 32making • 31missed • 33, 90multi-party • 42received • 90records • 90redialling • 32automatically • 178rejecting • 35ring tone • 102searching for a number in phonebook • 63times • 92waiting • 41, 99Card, SIMdialling numbers • 69inserting • 22locking • 177removing • 23Care • 198Charactersentering • 48Clock • 155Conference calls • 42Connection tone • 105Conversion, unit • 160Cost of calls • 92DDate, set • 155Dialled calls • 91Dialling • 31SIM card numbers • 69Displaybrightness • 173icons • 18DTMF tones, send • 38EEar-microphone • 45Earpiece volume • 35Emergency calls • 196Index229FFDN mode • 177Fixed Dial Number mode • 177Fun box • 134Functions, select • 28GGreeting message • 174Group settings • 74IIcons • 18Inbox • 111Input modechanging • 49International calls • 32Internet • 134KKey tonestype, select • 106volume • 35Keyslocation • 14LLCDbrightness • 173icons • 18settings • 172Length of calls • 92, 106Lettersentering • 48Lockingphone • 176SIM card • 177Low battery indicator • 26MMaintenance • 198Media box • 140Memory status, phonebook • 75Memosmaking • 149, 152viewing • 153Menulist • 57scrolling • 56MessagesMMS • 114SMS • 108Messages • 108alert types • 103broadcast • 128deleting • 114, 125greeting • 174inbox • 111outbox • 113preset • 127reading • 111ring tone • 103voice mail • 127writing • 109Microphone, mute • 36Minute minder • 106Missed calls • 33, 90Multi-party callsmaking • 42private conversation • 44removing a participant • 44NNamesentering • 48searching/dialling • 63storing • 66Network selection • 100Network services • 94Numberscorrecting • 31FDN • 177mode • 48, 55speed-dial • 67storing • 66
Index232OOptions, select • 28Organiser • 149Outbox • 113, 123PPasswordbarring • 98, 189phone • 176, 187Personal Identification Number • 187Phonelayout • 14settings • 172switching on/off • 27Phonebook • 63copying numbers • 65, 66deleting numbers • 66editing numbers • 65erasing numbers • 66memory status • 75sending SMS • 65storing numbers/names • 66PIN • 187changing • 175checking • 175PIN2 • 188changing • 177Power on/off tone • 105Preset messages • 127Problem, solve • 184PUK • 188PUK2 • 188Push to talk 76QQuiet mode • 106RReceived calls • 90Rediallingautomatically • 178Reset settings • 181Ringerincoming calls • 102messages • 103Road safety • 193SSafetybatteries • 191electronic devices • 194explosive atmospheres • 196information • 190, 197medical devices • 195operating environment • 193precautions • 7road • 193Second call, answer• 41Security settings • 175Service directory, dial • 75Settingsalarm • 157date • 155display • 172network • 94phone • 172reset • 181security • 175sound • 102time • 155SIM carddialling numbers • 69inserting • 22locking • 177removing • 23SMS • 108Soft keys, use • 28, 29Sound settings • 102Speed-dialling • 68Stopwatch • 162Switching on/offmicrophone • 36phone • 27Symbolic mode • 48, 55Index233TT9 mode • 48, 50Textentering • 48input modes • 48Timesetting • 155world • 155Timer • 161To do list • 154Toneconnection • 105keypad • 106message • 103power on/off • 105Travel adapter • 25VVoiceclarity • 39Volumecall ringer • 103earpiece • 35keys • 35WWaiting call • 41, 99WAP Browser • 134World time • 155WWW Services • 134
Index234
237Access the menu functions➀ Press the Menu soft key in Idle Mode.➁ Scroll with the navigatioin keys through the main menus until you reach the required menu. And then press the Select soft key.➂ Scroll with the Up or Down key through the list of options until the required option is selected.➃ Press the Select soft keyto confirm.Each of the two soft keys ( and ) performs the function indicated by the text above them, on the bottom line on the display.Switch on/offPress and hold the key.Make a call➀ Enter the number.➁ Press the key.End a call Press the key.Answer a callPress the key.Adjust the volumePress the volume keys on the left side of the phone.SGH-E820P GPRS telephone Quick reference card
238Redial the last numberPress the key twice.Speed-dialIn Idle Mode, hold down the appropriate key (2 to 9). Or, press the key and the key.Dial a number in your SIM cardEnter the SIM location, press the key, and press the key. Listen to your voice mailPress and hold the 1 key.Store numbers in Phonebook➀ Enter the number.➁ Press the Save soft key.➂ Select the memory type and press the Select soft key.➃ If you select Phone, select the number type and press the Select soft key.➄ Enter the name and press the Ok soft key.➅ If you select SIM, enter the location number and press the Ok soft key.Search for a number in Phonebook➀ Press the Phonebook soft key in Idle Mode.➁ Select Find name.➂ Enter a name. ➃ Press the Ok soft key.➄ Press the Left or Right ke y, if nece ssary.➅ Press the key to dial.

Navigation menu