Samsung Electronics Co SGHS501I Single-Band PCS GSM/ EDGE Phone with Bluetooth User Manual

Samsung Electronics Co Ltd Single-Band PCS GSM/ EDGE Phone with Bluetooth

Users Manual

* Depending on the software installed or your service provider or country, some of the descriptions in this guide may not match your phone exactly.* Depending on your country, your phone and accessories may appear different from the illustrations in this guide.World Wide Webhttp://www.samsungmobile.comPrinted in KoreaCode No.:GH68-xxxxxAEnglish(EU). 05/2006. Rev. 1.0
SGH-S501iUser’s GuideDraft_012006. 05. 15(Version: S501AGFD3)
ImportantsafetyprecautionsFailure to comply with the following precautions may be dangerous or illegal.Drive safely at all timesDo not use a hand-held phone while driving. Park the vehicle first. Switch off the phone when refuellingDo not use the phone at a refuelling point (service station) or near fuels or chemicals.Switch off in an aircraftWireless phones can cause interference. Using them in an aircraft is both illegal and dangerous.Switch off the phone near all medical equipmentHospitals or health care facilities may be using equipment that could be sensitive to external radio frequency energy. Follow any regulations or rules in force.InterferenceAll wireless phones may be subject to interference, which could affect their performance.
1Important safety precautionsBe aware of special regulationsMeet any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger.Water resistanceYour phone is not water-resistant. Keep it dry. Sensible useUse only in the normal position (held to the ear). Avoid unnecessary contact with the antenna when the phone is switched on.Emergency callsKey in the emergency number for your present location, then press . Keep your phone away from small children Keep the phone and all its parts, including accessories, out of the reach of small children.Accessories and batteriesUse only Samsung-approved batteries and accessories, such as headsets and PC data cables. Use of any unauthorised accessories could damage you or your phone may be dangerous.Qualified serviceOnly qualified service personnel may repair your phone.For more detailed safety information, see "Health and safety information" on page 93.• The phone could explode if the battery is replaced with an incorrect type.• Dispose of used batteries according to the manufacturer’s instructions.At very high volumes, prolonged listening to a headset can damage your hearing.
2About this GuideThis User’s Guide provides you with condensed information about how to use your phone. To quickly learn the basics for your phone, please refer to “Get started” and “Step outside the phone.”In this guide, the following instruction icons appear:Indicates that you need to pay careful attention to the subsequent information regarding safety or phone features.Indicates that you can get more information on the referenced page. →Indicates that you need to press the Navigation keys to scroll to the specified option and then select it.[ ] Indicates a key on the phone. For example, []< >Indicates a soft key, whose function is displayed on the phone screen. For example, <Select>• Camera and camcorderUse the camera module on your phone to take a photo or record a video.Special features of your phone• Image editorCrop, resize, rotate, and decorate your photos.•Music playerPlay music files using your phone as a music player.•File viewerOpen documents in various formats on the phone without corruption.
3Special features of your phone•BluetoothTransfer media files and personal data and connect to other devices using free, wireless Bluetooth technology.• Photo printingPrint your photos to preserve your best moments forever.• i-mode browserAccess the wireless web to get up-to-the-minute information and a wide variety of media content.• Get personal with photo/video caller IDSee who’s calling you when their very own photo or video displays.• Name cardCreate name cards with your number and profile. •Multimedia Message Service (MMS)Send and receive MMS messages with a combination of text, images, video, and audio.•E-mailSend and receive e-mails with image, video, and audio attachments.•JavaEnjoy Java™-based embedded games and download new games.• Voice recorderRecord memos or sounds.
4ContentsUnpack 6Make sure you have each itemYour phone 6Keys, features, and locationsGet started 7First steps to operating your phoneInstall and charge the phone ..................................... 7Power on or off........................................................ 8Keys and display ..................................................... 9Access menu functions ............................................ 11Customise your phone............................................. 12Make/Answer calls .................................................. 14Step outside the phone 15Begin with your camera, the music player, the web, and other special featuresUse the camera ...................................................... 15Play music ............................................................. 16Browse the web...................................................... 17Use Phonebook ...................................................... 17Send messages ...................................................... 18View messages....................................................... 20Use Bluetooth ........................................................ 20Use a memory card................................................. 22Watch the phone display on a TV .............................. 23Enter text 25AB, T9, Number, and Symbol modesCall functions 27Advanced calling featuresMenu functions 31All menu options listedSolve problems 91Help and personal needsHealth and safety information 93Index 101
5Overview of menu functionsTo access Menu mode, press [Centre] in Idle mode.1 Call logp. 311 Recent contacts2 Missed calls3 Dialled calls4 Received calls5 Delete all6 Call time7 Call costs*p. 31p. 32p. 32p. 32p. 32p. 32p. 332 Phonebookp. 331 Contact list2 Create contact3 Group4 Speed dial5 My name card6 Own number7 Management8 Service number*p. 33p. 34p. 34p. 35p. 36p. 36p. 36p. 373 Applicationsp. 371 Music player2 Voice recorder3 Image editor4 Java world5 World clock6 Alarm7 Calculator 8 Converter 9 Timer10 Stopwatch11 2D Barcode12 SIM AT*p. 37p. 40p. 40p. 42p. 42p. 43p. 44p. 44p. 44p. 45p. 45p. 454 Messagesp. 451 Create message2 My messages3 Templates4 Delete all5 Settings6 Memory statusp. 45p. 46p. 48p. 49p. 49p. 505 i-modep. 511 i-Menu2 Mail3 Java4 SMS5 Bookmarks6 Go to Webpage7 Saved Pages8 Browser Settingsp. 51p. 52p. 59p. 60p. 60p. 61p. 61p. 626 My filesp. 631 Images2 Videos3 Music4 Sounds5 Frame6 My vMessages7 Other files8 Memory card**9 Memory statusp. 63p. 64p. 65p. 65p. 66p. 67p. 67p. 69p. 697 Calendarp. 698 Camerap. 739 Settingsp. 791 Time and date2 Phone settings3 Display settings4 Sound settings5 Light settings6 Network services7 Bluetooth8 Security9 i-mode settings10 Reset settingsp. 79p. 79p. 80p. 81p. 83p. 83p. 86p. 88p. 89p. 91* Shows only if supported by your SIM card.** Shows only if a memory card is inserted.
6UnpackMake sure you have each itemYou can obtain various accessories from your local Samsung dealer. Phone Battery PC Data Cable PC Link CD Travel Adapter User’s GuideThe items supplied with your phone and the accessories at your Samsung dealer may vary, depending on your country or service provider.Your phoneKeys, features, and locationsSpecialfunction keysCamera keyEarpieceMain displayPower on/off/ Menu exit keyMicrophoneCamera lensMusic player control keysExternal displayLeft soft keyHeadset jackVolume keysDial keyAlphanumerickeysRight soft keyNavigation keys (Up/Down/Left/Right)Cancel/Delete keyMemory card slotMenu access/Confirm key (Centre)
7Get startedFirst steps to operating your phoneSIM card informationWhen you subscribe to a cellular network, you receive a plug-in SIM (Subscriber Identity Module) card loaded with your subscription details, such as your PIN, and available optional services.Install and charge the phoneRemove the battery cover.If the phone is already on, first turn it off by pressing and holding [ ]. Insert the SIM card.Make sure that the gold-coloured contacts on the card face down.Install the battery. Reattach the cover.Plug the travel adapter into the phone.Plug the adapter into a standard AC wall outlet.
8Get startedLow battery indicatorWhen the battery is low:• a warning tone sounds,• the low battery message displays, and• the empty battery icon blinks.If the battery level becomes too low, the phone automatically turns off. Recharge your battery. Power on or offWhen the phone is completely charged (the battery icon becomes still), unplug the adapter from the power outlet.Remove the adapter from the phone.Switch onDo not turn on the phone when mobile phone use is prohibited.1. Open the phone.2. Press and hold [ ].3. If necessary, enter the PIN and press <OK>.Switch off1. Open the phone.2. Press and hold [ ].
9Get startedKeys and displayKeysIn Idle mode, press [ ] to enter the Mail menu. Press [ ] to enter the i-mode menu.In Menu mode, perform the function indicated on the bottom line of the display.In Idle mode, access your favourite menus directly.p. 80In Menu mode, scroll through menu options.In Idle mode, enter Menu mode. Also, launch the i-mode browser when held down.In Menu mode, select the highlighted menu option or confirm input.Make or answer a call.In Idle mode, retrieve numbers recently dialled, missed, or received.Press and hold to switch the phone on or off. End a call. In Menu mode, cancel input and return the phone to Idle mode.Delete characters from the display.In Menu mode, return to the previous menu level.Enter numbers, letters, and some special characters.In Idle mode, press and hold [1] to access your voicemail server. Press and hold [0] to enter an international call prefix.Enter special characters.In Idle mode, press and hold [ ] to activate or deactivate Quiet mode. Press and hold [ ] to enter a pause between numbers.Adjust the phone volume.In Idle mode, with the phone open, adjust the key tone volume. With the phone closed, press and hold to turn on the external display. In Idle mode, press and hold to turn on the camera.In Camera mode, take a photo or record a video.
10Get startedDisplay Press and hold to launch or close the Music player. Start playing music or pause playback.Move back to the previous file during playback.Skip to the next file during playback.LayoutText and graphicsdisplay messages, instructions, and information you enter.Soft key function indicatorsshow the current functions assigned to the soft keys.i-mail i-modeIconsdisplay various icons.Soft key function indicatorsshow the current functions assigned to the soft keys.Icons*Received signal strengthCall in progressOut of your service area; you cannot make or receive callsRoaming networkNew SMS messageNew voicemail New i-mail or i-MMS message• Grey: a message on your phone; when a message is being retrieved, the icon blinks.• Yellow: a message on the i-mode server• Red: Inbox is fulli-mode is active• Yellow: in a GPRS network• Grey: in a GSM networki-mode connection is being madei-mode is locked
11Get startedAccess menu functionsHome Zone, if registered for the appropriate serviceOffice Zone, if registered for the appropriate serviceBluetooth activeConnected to Bluetooth hands-free car kit or headsetSynchronised with PCMemory card insertedAlarm setCall ringer set to vibrateQuiet mode (Vibration)Quiet mode (Mute)Mute mode, during a callBattery power level* Depending on your country or service provider, the icons shown on the display may vary.Use the soft keysThe roles of the soft keys vary depending on the function you are using. The bottom line of the display indicates their current role.Press the left soft key to select the highlighted option.Press the right soft key to return to the previous menu level.Select Back
12Get startedCustomise your phoneSelect an option1. Press the appropriate soft key.2. Press the Navigation keys to move to the next or previous option.3. Press <Select> or [Centre] to confirm the function displayed or option highlighted.4. To exit, choose either of the following methods.• Press <Back> or [C] to move up one level.• Press [ ] to return to Idle mode.Use shortcutsPress the number key corresponding to the option you want.1. In Idle mode, press [Centre] and select Settings → Phone settings → Language.2. Select a language.You can set wallpaper for the idle screen on the main display.1. In Idle mode, press [Centre] and select Settings → Display settings → Wallpaper → Main display.2. Select an image or a video category.3. Select an image or a video.4. Press <Select>.5. Press <Save>.Display languageIdle mode wallpaper
13Get startedYou can change the colour for the display components, such as title bars and highlight bars.1. In Idle mode, press [Centre] and select Settings → Display settings → Skin.2. Select a colour pattern.1. In Idle mode, press [Centre] and select Settings → Sound settings → Incoming call → Ringtone.2. Select a ringtone category.3. Select a ringtone.4. Press <Save>.Menu mode skin colourCall ringer melodyYou can set the Navigation keys as shortcuts to access your favourite menus.1. In Idle mode, press [Centre] and select Settings → Phone settings → Shortcuts.2. Select a key.3. Select a menu to be assigned to the key.You can switch the phone to Quiet mode to avoid disturbing other people.Press and hold [ ] in Idle mode.Menu shortcutsQuiet mode
14Get startedMake/Answer callsYou can protect the phone against unauthorised use with a phone password. The phone will require the password on power-up.1. In Idle mode, press [Centre] and select Settings → Security → Change password.2. Enter the default password, 00000000, and press <OK>.3. Enter a new 4- to 8-digit password and press <OK>.4. Enter the new password again and press <OK>.5. Select Phone lock.6. Select Enable.7. Enter the password and press <OK>.Phone lock1. In Idle mode, enter an area code and phone number.2. Press [ ].3. To end the call, press [ ].1. When the phone rings, press [].2. To end the call, press [ ].Press [ / ].Make a callAnswer a callAdjust the volume during a call
15Step outside the phoneBegin with your camera, the music player, the web, and other special featuresUse the camera1. In Idle mode, press and hold [] to turn on the camera.2. Aim the lens at the subject and make any desired adjustments.3. Press [Centre] or [ ] to take a photo. The photo is saved automatically.4. Press <Preview> to take another photo.1. In Idle mode, press [Centre] and select My files → Images → My photos.2. Select the photo you want.Take a photoView a photo1. In Idle mode, press and hold [ ] to turn on the camera.2. Press [1] to switch to Record mode.3. Press [Centre] or [ ] to start recording.4. Press [Centre] or [ ] to stop recording. The video is saved automatically.5. Press <Preview> to record another video.1. In Idle mode, press [Centre] and select My files → Videos → My video clips.2. Select the video you want.Record a videoPlay a video
16Step outside the phonePlay musicUse these methods:• Download from the wireless webp. 51• Download from a computer using the optional Samsung PC StudioSamsung PC Studio User’s Guide• Receive via Bluetoothp. 86• Copy to a memory card and insert the card into the phonep. 221. In Idle mode, press [Centre] and select Applications → Music player.2. Press <Options> and select Add music from → Phone or Memory card.Copy music files to the phoneCreate a play list3. Press [Centre] to select the files you want and press <Select>.4. Press <Back> to return to the Music player screen.1. From the music player screen, press [Centre].2. During playback, use the following keys:• Centre: pauses or resumes playback.• Left: moves back to the previous file.• Right: skips to the next file.• Up: opens the play list.• / : adjusts the volume.• Down: stops playback.Play music files
17Step outside the phoneBrowse the webUsing the i-mode browser, you can easily access the wireless web to get a variety of up-to-date services and information and to enjoy downloads of web content.Use PhonebookIn Idle mode, press and hold [Centre].• To scroll through browser items, press [Up] or [Down]. • To select an item, press [Centre].• To return to the previous page, press <Back>.• To move to the next page, press <Options> and select Go → Forward.• To access browser options, press <Options>.Launch the i-mode browserNavigate the i-mode browserTo the phone’s memory:1. In Idle mode, enter a phone number and press <Options>.2. Select Save contact → Phone → New → a number type.3. Specify contact information: First name, Last name, Mobile, Home, Office, Fax, Other, Email, Caller ID, Ringtone, Group, and Note.4. Press <Save> to save the contact.To th e SI M car d :1. In Idle mode, enter a phone number and press <Options>.2. Select Save contact → SIM → New.3. Enter a name and press <Save> to save the contact.Add a contact
18Step outside the phoneSend messages1. In Idle mode, press [Centre] and select Phonebook → Contact list.2. Select a contact.3. Scroll to a number and press [] to dial, or press [Centre] to edit contact information.1. In Idle mode, press [Centre] and select Phonebook → My name card.2. Specify your contact information.3. Press <Save> to save the name card.4. To send the name card, press <Options> and select Send via → a sending method.Find a contactCreate and send a name card1. In Idle mode, press [Centre] and select Messages → Create message.2. Enter your message.3. Press <Options> and select Save and send or Send only.4. Enter destination numbers.5. Press [Centre] to send the message.1. In Idle mode, press <i-mail> and select Compose iMMS.2. Press [Centre].3. Enter destination numbers or e-mail addresses and press [Centre].4. Press [Down] and then [Centre].Send a text message (SMS)Send an i-MMS message (MMS)
19Step outside the phone5. Enter the message title and press [Centre].6. Select SMIL → Media and add text, images, sounds, and videos.7. On the slide preview screen, press <Options> and select Send to send the message.1. In Idle mode, press <i-mail> and select Compose iMail.2. Press [Centre].3. Enter destination numbers or e-mail addresses and press [Centre].4. Press [Down] and then [Centre].5. Enter the mail title and press [Centre].Send an i-mail6. Press [Down] to move to the attachment line.7. Press <Options> and select Attach File Menu.8. Select the attachment field and use the following options for adding files:•Attach File: add images, sounds, videos, music files, name cards, or schedule items.•Attach Melody: add MFi (Melody Format for i-mode) melody files.•Attach Bookmark: add bookmarks.9. Press [Down] and then [Centre].10. Enter the mail text and press [Centre].11. Select Send to send the mail.
20Step outside the phoneView messages Use BluetoothYour phone is equipped with Bluetooth technology which enables you to connect the phone wirelessly to other Bluetooth devices and exchange data with them, talk hands-free, or control the phone remotely.When a notification appears: 1. Press <View>. 2. Select the message from the Inbox.From the Inbox:1. In Idle mode, press [Centre] and select Messages → My messages → Inbox.2. Select a message.From the Inbox:1. In Idle mode, press <i-mail> and select Inbox → an Inbox folder.2. Select a message.View a text messageView an i-mail or i-MMS message1. In Idle mode, press [Centre] and select Settings → Bluetooth → Activation → On.2. Select My phone’s visibility → On to allow other devices to find your phone.1. In Idle mode, press [Centre] and select Settings → Bluetooth → My devices → Search for new devices.2. Select a device.Turn on BluetoothSearch for and pair with a Bluetooth device
21Step outside the phone3. Enter a Bluetooth PIN or the other device’s Bluetooth PIN, if it has one, and press <OK>.When the owner of the other device enters the same code, pairing is complete.1. Access an application, such as Phonebook, My files, or Calendar.2. Scroll to an item.3. Press <Options> and select Send via → Bluetooth → Search for new devices. 4. Select a device.5. If necessary, enter the Bluetooth PIN and press <OK>.Send dataTo receive data via Bluetooth, your phone’s Bluetooth feature must be active.1. When a device attempts to access your phone, press <Yes> to permit the connection.2. If necessary, press <Yes> to confirm that you are willing to receive.Receive data
22Step outside the phoneUse a memory cardYou can use an optional microSD memory card to increase your phone’s memory capacity. • Frequent erasing and writing will shorten a card’s lifespan.• Do not remove a card from the phone or turn off the phone while data is being accessed or transferred. This could result in loss of data and/or damage to the card or phone.• Do not subject cards to strong shocks.• Do not touch card terminals with your fingers or metal objects. If dirty, wipe the card with a soft cloth.Important memory card information• Do not expose cards in a place subject to electro-static discharge and/or electrical noise.• Keep cards away from small children or pets.1. Slide a memory card into the card slot, with the label side face up.2. Press the card until it locks into place.Insert a memory card
23Step outside the phoneWatch the phone display on a TVYou can view the display of your phone on a TV screen by connecting the phone and TV with a TV out cable. This enables you to enjoy the photos, videos and music stored in the phone’s memory with your family or friends on a larger screen.Using a card adapter and a USB card reader/writer, you can read the card on a computer.1. Insert a memory card into a card adapter, and then the adapter into a card reader/writer.2. Plug the USB connecter of the card reader/writer into the USB port on your computer.3. Access the appropriate memory disk and copy to and from the card.Use a card adapter• Depending on your particular TV model, the location and shape of the video input and audio output ports may vary. Match cable connector and TV port colours.• Depending on the video system, the image may vibrate or in some other way be less than optimal.Important TV information
24Step outside the phone• Depending on the video quality, some video clips may not display.• You cannot use a Bluetooth stereo headset or the zooming feature in TV Out mode.1. With the TV switched on, connect your phone to the TV with a TV out cable, as shown.Important TV information(continued)Transfer phone display to a TV2. Switch the TV to External Input mode.The display switches to TV Out mode and you can view the phone’s display on the TV screen.3. If necessary, set the video system for your TV in the TV-out settings menu.p. 814. Access the application you want and open files.
25Enter textAB, T9, Number, and Symbol modesYou can enter text for some features, such as Messages, Contacts, or Calendar, using AB mode, T9 mode, Number mode, and Symbol mode.Changing the text input mode• Press and hold [ ] to switch between T9 mode ( ) and AB mode ( ). Depending on your country, you may also be able to access an input mode for your specific language.• Press [ ] to change case or switch to Number mode ( ).• Press and hold [ ] to switch to Symbol mode.Using AB modePress the appropriate key until the character you want appears on the display.(Creating an SMS message with GSM-Alphabet encoding)Characters in order displayedKey Upper case Lower case
26Enter textOther AB mode operations• To enter the same letter twice or to enter a different letter on the same key, wait for the cursor to move to the right automatically or press [Right]. Then, enter the next letter.• Press [ ] to insert a space.• Press the Navigation keys to move the cursor. •Press [C] to delete characters one by one. Press and hold [C] to clear the display.Using T9 modeT9 is a predictive text input mode that allows you to key in any character using single keystrokes.Entering a word in T9 mode1. Press [2] to [9] to start entering a word. Press each key once for each letter. For example, press [4], [3], [5], [5], and [6] to enter Hello in T9 mode. T9 predicts the word that you are typing, and it may change with each key that you press.2. Enter the whole word before editing or deleting characters.3. When the word displays correctly, go to step 4. Otherwise, press [0] to display alternative word choices for the keys that you have pressed. For example, Of and Me use [6] and [3].4. Press [ ] to insert a space and enter the next word.Other T9 mode operations• Press [1] to enter periods or apostrophes automatically. To access more symbols, press and hold [ ].• Press [ ] to insert a space.• Press the Navigation keys to move the cursor. • Press [C] to delete characters one by one. Press and hold [C] to clear the display.Adding a new word to the T9 dictionaryThis feature may not be available for some languages.1. Enter the word that you want to add.
272. Press [0] to display alternative words for your key presses. When there are no more alternative words, Add appears on the bottom line. 3. Press <Add>.4. Enter the word you want using AB mode and press <OK>.Using Number modeNumber mode enables you to enter numbers. Press the keys corresponding to the digits you want.Using Symbol modeSymbol mode enables you to insert symbols.Call functionsAdvanced calling featuresMaking a call1. In Idle mode, enter the area code and phone number.2. Press [ ].3. When you want to end the call, press [ ].Making an international call1. In Idle mode, press and hold [0]. The + character appears.2. Enter the country code, area code, and phone number, then press [ ].To Pressdisplay more symbols [Up] or [Down]. select a symbol the corresponding number key.clear the entered symbols [C]. insert the symbols <OK>.• Press [C] to clear the last digit or press and hold [C] to clear the whole display. You can move the cursor to edit an incorrect digit.• Press and hold [ ] to enter a pause between numbers.
28Call functionsRedialling recent numbers1. In Idle mode, press [ ] to display the list of recent numbers.2. Scroll to the number you want and press [ ].Making a call from PhonebookOnce you have stored a number in Phonebook, you can dial the number by selecting it from Phonebook.p. 33You can also use the speed dial feature to assign your most frequently dialled numbers to specific number keys.p. 35You can quickly dial a number from the SIM card using its location number assigned when stored.1. In Idle mode, enter a location number and press [].2. Press [Left] or [Right] to scroll through other numbers.3. Press <Dial> or [ ] to dial the number you want.Answering a callWhen you receive an incoming call, the phone rings and displays the incoming call image. Press <Accept> or [ ] to answer the call.Tips for answering a call• When Anykey answer is active, you can press any key, except for [ ] and <Reject>.p. 80• When Active flip is active, you can simply open the phone.p. 80• Press [ ] or <Reject> to reject a call.• Press and hold [ / ] to reject a call or mute the ringer, depending on the Volume key setting. p. 80Viewing missed callsIf you have missed calls, the screen displays how many calls you have missed.1. Press <View>.2. If necessary, scroll through the missed calls.
29Call functions 3. Press [ ] to dial the number you want.Using the headsetUse the headset to make or answer calls without holding the phone. Connect the headset to the jack on the left side of the phone. The button on the headset works as follows:Options during a callYou can access a number of functions during a call.Adjusting the volume during a callUse [ / ] to adjust the earpiece volume during a call.Press [ ] to increase the volume level and [ ] to decrease the volume level.Placing a call on hold/RetrievingPress <Hold> or <Retrieve> to place a call on hold or retrieve the call.Making a second callYou can make another call if your network supports it.1. Press <Hold> to put the call on hold.2. Make the second call in the normal way.3. Press <Swap> to switch between the calls.4. Press <Options> and select End held call to end the call on hold.5. To end the current call, press [ ].Answering a second callYou can answer an incoming call while already on the phone, if your network supports it and you have activated the call waiting feature.p. 84 1. Press [ ] to answer the call. The first call is automatically put on hold.2. Press <Swap> to switch between the calls.To Pressredial the last call and hold the button twice.answer a call the button.end a call the button.
30Call functions3. Press <Options> and select End held call to end the call on hold.4. To end the current call, press [ ].Using the speakerphone featureUse the phone as a speakerphone to talk and listen with the phone a short distance away.Press [Centre] and then <Yes> to activate the speakerphone feature. Press [Centre] again to switch back to the earpiece.Using In-call optionsPress <Options> to access the following options during a call:•Speaker on/Normal: turn on the speakerphone feature or switch back to Normal mode.•Switch to headset/Switch to phone: switch the call to a Bluetooth headset or hands-free car kit or back to the phone.•Menu: access the phone's menu functions.•Mute/Unmute: switch off the phone's microphone so that the other person on the phone cannot hear you, or switch it back on.•Mute keys/Send keys: switch the key tones on or off.•Send DTMF: send the DTMF (Dual tone multi-frequency) tones as a group. The DTMF tones are the tones used in phones for tone dialling, sounding when you press the number keys. This option is helpful for entering a password or an account number when you call an automated system, like a banking service.•Contacts: access the contact list.•End held call: disconnect the call currently on hold.To communicate with answering machines or computerised telephone systems, Send keys must be selected.
31•Transfer: transfer the currently active call to a caller on hold. The two callers can talk to each other, but you are disconnected from the call.•Join: set up a multi-party call by adding a caller on hold to a currently active call. You can include up to 5 people on a multi-party call.•Select one: select one of multi-party call participants. You can then use the following options:Private: have a private conversation with one multi-party call participant. The other participants can converse with each other. After the private conversation, select Join to return to themulti-party call.Remove: disconnect one multi-party call participant.Menu functionsAll menu options listedCall log (Menu 1)Use this menu to view the calls you have dialled, received, or missed, and the length of the calls. You can also check the cost of your calls, if your SIM card supports this function.To access this menu, press [Centre] in Idle mode and select Call log.Recent contacts (Menu 1.1)This menu displays the most recent calls dialled, received, or missed. Accessing a call log1. Press [Left] or [Right] to move to another call type.2. Press [Up] or [Down] to scroll through the call list. 3. Press [Centre] to view the details of a call, or press [ ] to dial a number.
32Menu functionsUsing call log optionsWhile viewing call details, press <Options> to access the following options:•Call: edit the number.•Add to Phonebook: save the number to Contacts.•Send: send an SMS, i-mail, or i-MMS message to the selected number.•Delete: delete the selected call log or all logs.Missed calls (Menu 1.2)This menu displays the most recent calls you did not answer.Dialled calls (Menu 1.3)This menu displays the most recent calls you have dialled.Received calls (Menu 1.4) This menu displays the most recent calls you have received. Delete all (Menu 1.5) Use this menu to delete all of the records in each call type.1. Press [Centre] to select the call types to be cleared. 2. Press <Delete>. 3. Press <Yes> to confirm the deletion.Call time (Menu 1.6)This menu displays the time log for calls made and received. The actual time invoiced by your service provider will vary.•Last call time: check the length of your last call.•Total dialled calls: check the total length of all the calls you have dialled.•Total received calls: check the total length of all the calls you have received.To reset the call timers, press <Reset>. You need to enter the phone password.The password is preset to 00000000. You can change this password.p. 89
33Menu functions Phonebook (Menu 2)Call costs (Menu 1.7) This network feature displays the cost of calls. This menu is available only if supported by your SIM card. Note that this is not intended to be used for billing purposes.•Last call cost: check the cost of your last call.•Total cost: check the total cost of all of your calls. If the total cost exceeds the maximum cost set in Set max. cost, you must reset the counter before you can make another call.•Max. cost: check the maximum cost limit set in Set max. cost.•Reset counters: reset the cost counters.•Set max. cost: set the maximum cost authorised for your calls.•Price/Unit: set the price per unit that is applied when the cost of your calls is calculated.Phonebook (Menu 2)You can store phone numbers on your SIM card and in your phone’s memory. The SIM card and phone’s memory are physically separate, but they are used as a single entity called Phonebook.To access this menu, press [Centre] in Idle mode and select Phonebook.Contact list (Menu 2.1)Use this menu to search for numbers in Phonebook.Finding a contact1. Enter the first few letters of the name that you want to find.2. Select a contact from the list.3. Scroll to a number and press [ ] to dial, or press [Centre] to edit contact information.Using Phonebook optionsWhile viewing contact details, press <Options> to access the following options:•Edit: edit contact information.
34Menu functions•Send message: send an SMS, i-mail, or i-MMS message to the selected number, or to the selected e-mail address.•Copy to: copy the selected number to the phone’s memory or to the SIM card.•Send via: send the contact via SMS, i-mail, i-MMS, or Bluetooth. •Delete: delete the selected contact.Create contact (Menu 2.2)Use this menu to add a new contact to Phonebook.Storing a contact in the phone’s memory1. Select Phone.2. Change the settings or enter information about the contact.•First name/Last name: assign a name.•Mobile/Home/Office/Fax/Other: add a number in any type.•Email: assign an e-mail address.•Caller ID: assign an image or video to alert you to a call from the person.•Ringtone: assign a ringtone to alert you to a call from the person.•Group: assign the contact to a caller group.•Note: add a memo about the person.3. Press <Save> to save the contact.Storing a contact on the SIM card1. Select SIM.2. Enter information about the contact.•Name: assign a name.•Phone number: add a number.•Location: assign a location number.3. Press <Save> to save the contact.Group (Menu 2.3)Use this menu to organise your contacts in caller groups.To assign a caller ID image or video, ringtone, or group, the contact must be saved to the phone’s memory.
35Menu functions Phonebook (Menu 2)Creating a new caller group1. Press <Options> and select Add.2. Enter a name for the group.3. Select the caller ID line and set an image or video.4. Select the ringtone line and set a melody.5. Press <Save> to save the group.Adding members to a caller group1. Select a group.2. Press <Add>.3. Press [Centre] to select the contacts to be added.4. Press <Select>.Managing caller groupsWhile viewing the group list, press <Options> to access the following options:•View: display the members of the selected group.•Add: add a new group.•Edit: change the group properties.•Send message: send an SMS, i-mail, or i-MMS to the group members you want.•Delete: delete the selected group or all groups. Group members, however, will not be deleted from Contacts.Speed dial (Menu 2.4)Use this menu to assign a speed dial number (2 to 9) for 8 of your most frequently dialled numbers.Assigning speed dial numbers1. Select a key location from 2 to 9. Key 1 is reserved for your voicemail server.2. Select a contact from the contact list.3. Select a number, if the contact has more than one number.Managing speed dial entriesFrom the Speed dial screen, press <Options> to access the following options:•Add: assign a number to an unassigned key.•View: check the name and number assigned to a key.•Change: assign a different number to a key.•Remove: clear the speed dial setting for a key.
36Menu functionsDialling speed dial numbersIn Idle mode, press and hold the appropriate key.My name card (Menu 2.5)Use this menu to create a name card and send it to other people.Saving your name cardThe procedure for creating your name card is the same as the one for saving a phone number in the phone’s memory.p. 34 Using name card optionsAfter saving your name card, press <Options> to access the following options:•Edit: edit the name card. •Send via: send the name card via SMS, i-mail, i-MMS, or Bluetooth.•Exchange namecard: exchange name cards with another person via Bluetooth.•Delete: delete the name card.Own number (Menu 2.6) Use this feature to check your phone numbers, or to assign a name to each of the numbers. Changes made here do not affect the actual subscriber numbers on your SIM card.Management (Menu 2.7)Use this menu to manage Contacts entries.•Save new contact to: select a default memory location for saving contacts. If you select Always ask, the phone will ask you to select a memory location each time you save a number.•Copy all to: copy all of the contacts stored on the SIM card to the phone’s memory, or vice versa.•Delete all: delete all of the contacts from your phone’s memory, your SIM card, or both.•Memory status: check the number of contacts you have stored in the phone’s memory and on the SIM card.
37Menu functions Applications (Menu 3)Service number (Menu 2.8)Use this menu to view the list of Service Dialling Numbers (SDN) assigned by your service provider, including emergency numbers and numbers for directory enquiries. This menu is available if your SIM card supports SDN.1. Scroll to the number you want and press <View>.2. Press <Dial> or [ ].Applications (Menu 3)Use this menu to play music files, edit photos, or play Java games. You can also use convenient features, such as a voice recorder, world clock, alarm clock, calculator, converter, timer, and stopwatch.To access this menu, press [Centre] in Idle mode and select Applications.Music player (Menu 3.1)Use this menu to enjoy music. First, you need to save music files into your phone’s memory or on a memory card. You can play MP3 and 3GP (ACC and ACC+) files.To enjoy high quality music, you can use an optional Bluetooth stereo headset.Downloading or receiving music filesUse these methods to save music files to your phone’s memory:• Download from the wireless webp. 51• Download from a computer using the optional Samsung PC StudioSamsung PC Studio User’s Guide• Receive via an active Bluetooth connectionp. 86• Copy to a memory card and insert the card into the phonep. 22The downloaded or received files are stored in the Music folder.p. 65Creating a play list1. From the music player screen, press <Options> and select Add music from → Phone or Memory card.Normal headsets are not compatible with the music player.
38Menu functions2. Press [Centre] to select the files to be added and press <Select>.3. Press <Back> to return to the music player screen.Playing music files1. From the music player screen, press <Options> and select Play via.2. Select Phone to use the phone speaker.Select Bluetooth stereo headset to use a Bluetooth stereo headset and then search for and connect the phone to the headset.During playback, use the following keys:Using music player optionsDuring playback, press <Options> to access the following options:•Play/Pause: begin or pause playback.•Transfer to Bluetooth stereo headset/Transfer to phone: switch the sound output to a Bluetooth stereo headset or the phone speaker.•Open: access the play list of the current album or album list. Key FunctionCentre Pauses or resumes playback.Left Returns to the previous file.Right Skips to the next file.Up Opens the current play list.Down Stops playback./ Adjusts the volume level.1Turns 3D sound on or off.2Changes the playback animation.3Changes the repeat mode.4Changes the equaliser mode.5Changes the skin type.6Turns Shuffle mode on or off.Key Function
39Menu functions Applications (Menu 3)•Remove from playlist: remove the selected file from the play list.•Settings: change the default settings for playing music files. Repeat mode: select a repeat mode.Shuffle: set the music player to play music at random.Music overrides other sounds: set the music player to continue playback even if you exit it.Equaliser: select an equaliser setting.3D sound: turn 3D sound on or off.Visualisation: change the playback animation.Skin: select a skin type.Volume: select a volume level.•Details: access the file properties.Accessing the play listFrom the music player screen, press [Up].Press <Options> to access the following options:•Play: play the currently selected file.•Add music from: add files to the play list.•Go to album list: access the album list.•Move to: move the selected file to another play list.•Copy to: copy the selected file to another play list.•Move track in playlist: move the selected file to the position you want within the play list.•Remove: remove the selected file or all files from the play list.•Details: access the file properties.Playing music files with the phone closedPress and hold [ ] to launch the music player. Use the following keys to control the music player:Key FunctionBegins or pauses playback.Returns to the previous file.Skips to the next file./ Adjusts the volume.
40Menu functionsVoice recorder (Menu 3.2)Use this menu to record voice memos. A voice memo can be up to one hour long.Recording a voice memo1. Press [Centre] to start recording.2. Speak into the microphone. Press [Centre] to pause or resume recording.3. Press <Stop> or [Down] to end recording. The voice memo is saved automatically.4. Press [Centre] to review the voice memo, or [Up] to record a new voice memo.Playing a voice memo1. From the Voice recorder screen, press <Options> and select Go to My voice clips.2. Select a voice memo.During playback, use the following keys:Changing the recording modeYou can change the recording mode of the voice recorder. The maximum recording time is determined by this setting. Before recording a memo, press <Options> and select Settings → a recording mode:•Limit for multimedia message: record a voice memo for adding to an i-MMS message.•Maximum 1 hour: record a voice memo of up to one hour.Image editor (Menu 3.3)Use this menu to edit your photos using various editing tools.Key FunctionCentre Pauses or resumes playback.Left Moves backward in a memo.Right Moves forward in a memo./ Adjusts the volume.Down Stops playback.Key Function
41Menu functions Applications (Menu 3)Applying an effect1. Press <Options> and select New image → Open or Take photo.2. Select a photo or take a new photo.3. Press <Options> and select Effects → an effect option.4. Press <Done>.5. Press <Options> and select Save as.6. Enter a new file name and press <OK>. Transforming1. Select a photo or take a new photo.2. Press <Options> and select Transform → an option:•Resize: change the photo size.•Rotate: rotate the photo 90 degrees clockwise or counterclockwise.•Flip: flip the photo.3. Press <Done>.4. Press <Options> and select Save as.5. Enter a new file name and press <OK>. Cropping1. Select a photo or take a new photo.2. Press <Options> and select Crop.3. Move the cropping frame to the area of the image you want. Press <Options> and select Resize to change the frame size.4. Press <Options> and select Done.5. Press <Options> and select Save as.6. Enter a new file name and press <OK>. Adding visual featuresYou can decorate photos by adding a frame, an image, or a note.1. Select a photo or take a new photo.2. Press <Options> and select Insert → a feature type.3. Select an item or enter text to be inserted.4. Adjust the position of the inserted item or text using the Navigation keys.
42Menu functions5. Press <Done>, or press <Options> and select Done.6. Press <Options> and select Save as.7. Enter a new file name and press <OK>. Merging a stamp effectThis editing tool allows you to make an outline stamp of a photo and then merge it with another photo. You can use this tool to create your own photo postcard by taking a photo of a handwritten message and merging it with a photo.1. Select a photo or take a new photo.2. Press <Options> and select Merge stamp. The background photo appears in the image box next to .3. Press <Options> and select Add image. 4. Add a photo by selecting or taking a photo. The added photo appears in the image box next to . This will be the stamp.5. Press <Options> and select Merge. The stamp photo is added to the background photo as an outline.6. Press <Options> to access the following stamp edit options:•Move: change the position of the stamp.•Resize: change the stamp size.•Rotate: rotate the stamp.•Stamp color: change the stamp colour.•Shadow on: apply a shadow to the stamp.7. When you have finished, press <Options> and select Done.8. Press <Options> and select Save as.9. Enter a new file name and press <OK>. Java world (Menu 3.4)Use this menu to access the list of the applications you have downloaded from the wireless web.p. 59World clock (Menu 3.5)Use this menu to set your local time zone and find out the current time in another part of the world.
43Menu functions Applications (Menu 3)Viewing world time1. From the world map, press [Left] or [Right] to scroll to the city you want. As the time line moves, the time and date of the given zone display.2. Press [Centre] to save the city as your local time zone.Applying daylight saving time1. From the world map, press <Options> and select Apply daylight saving time.2. Press [Centre] to select the time zones you want. 3. Press <Save>.Alarm (Menu 3.6) Use this menu to set alarms. The alert type for a normal alarm corresponds to the call alert type settings. A wake-up alarm is not affected by your sound settings.Setting an alarm1. Select the type of alarm.2. Set each alarm option:•Alarm: activate the alarm.•Alarm time: enter the time for the alarm to ring.•AM/PM: set AM or PM in 12-hour format.•Repeat: select a repeat option.•Alarm tone: select an alarm tone.3. Press <Save>.Stopping an alarm• For a non-wake-up alarm, press any key.• For a wake-up alarm, press <Confirm> or [Centre]. Press any key, except for <Confirm> and [Centre], to cause it to sound again after 5 minutes. You can do this a maximum of 5 times.Setting the alarm to sound when the phone is offFrom the Alarm screen, select Auto power-up → On.If the phone is off when it is time for the alarm to ring, the phone switches on and sounds the alarm.
44Menu functionsCalculator (Menu 3.7) Use this menu to perform basic arithmetic functions, such as addition, subtraction, multiplication, and division.1. Enter the first number. •Press <.()> to insert a decimal point or bracket.•Press [] or [] to move the cursor.2. Press one of the Navigation keys to access the math function you want.3. Enter the second number.4. Press [Centre] to view the result.5. If necessary, repeat from step 2 to continue the calculation.Converter (Menu 3.8)Use this menu for common conversions, such as currency and temperature.1. Select a converter.2. Press [Left] or [Right] to select the original unit and press [Down].3. Enter the value to be converted and press [Down].• Press [ ] to insert a decimal point.• Press [ ] to change the temperature to above zero (+) or below zero (-).4. Press [Left] or [Right] to select the unit to which you want to convert.The equivalent value for the amount you entered displays.Timer (Menu 3.9)Use this menu to set a period of time for the phone to count down. The phone sounds an alarm when the specified period of time has expired.Starting the timer1. Press <Set>.For the currency converter, you can view and set currency rates by pressing <View rate>.
45Menu functions Messages (Menu 4)2. Enter the length of time you want to count down and press <OK>.3. Press [Centre] to start counting down.Stopping the timer• Press any key when the timer rings.• Press [Centre] on the Timer screen to stop the timer before it rings.Stopwatch (Menu 3.10)Use this menu to measure elapsed time. The maximum time is 10 hours.1. Press [Centre] to start the stopwatch.2. Press [Centre] to check an interval. You can repeat this step for a total of 4 intervals.2D Barcode (Menu 3.11) This menu enables you to save captured barcodes for your shopping items and use it later. Once you have captured a barcode, the phone will decode and save it as data information in the list.SIM AT (Menu 3.12) This menu is available if you use a SIM AT card that supports SIM Application Tool kit menus and provides additional services, such as news, weather, sports, entertainment, and location services. Available services may vary, depending on your service provider’s plans. For details, see your SIM card instructions or contact your service provider.Messages (Menu 4)Use the Messages menu to send and receive text messages. You can also use the cell broadcast message feature.To access this menu, press [Centre] in Idle mode and select Messages.Create message (Menu 4.1)Short Message Service (SMS) allows you to send text messages that may include simple pictures, animated images, and melodies.
46Menu functionsCreating and sending an SMS message1. Enter your message and press [Centre].2. Enter a destination number.To send the message to more than one recipient, fill in additional destination fields.3. Press [Centre] to send the message.Using options while composing an SMS messageWhile composing a message, press <Options> to access the following options:•Save and send: save the message in the Outbox folder and then send it.•Send only: just send the message.•Insert: add a template, Phonebook entry, or bookmark.•Add image/Add animation/Add melody: attach a simple image, an animated image, or a melody.•Attach: attach a Phonebook entry as a name card or a calendar data as a data format attachment.•Save in: save the message in another message folder.•Input language: change the language to be used in T9 input mode.•Text style: change the text attributes.•Input method: change the text input mode.My messages (Menu 4.2)Use this menu to access text messages you have received, sent, or which have failed in sending.Inbox (Menu 4.2.1)This folder stores all the text messages you have received.Viewing a messageThe following icons may appear on the message list to show the message type: The maximum number of characters allowed in a message varies by service provider. If your message exceeds the maximum number of characters, the phone will split the message.
47Menu functions Messages (Menu 4)• SMS• Delivery report for your sent messagesUsing message optionsWhile viewing a message, press <Options> to access the following options:SMS messages•Reply via: reply to the sender via SMS, i-mail, or i-MMS. •Forward: forward the message to other people.•Delete: delete the message.•Move to phone/Move to SIM: move the message between the SIM card and the phone’s memory.•Cut address: extract URLs, e-mail addresses, or phone numbers from the message.•Cut media: save media content from the message to your phone’s memory.•Protection: lock the message to protect it from being deleted, or unlock the message. You can protect only messages stored in the phone’s memory.•Add to Block list: add the sender’s number to the Block list to reject the messages from the sender.Delivery reports•Cut address: extract URL, e-mail addresses, or phone numbers from the message.•Delete: delete the message.•Protection: lock the message to protect it from being deleted, or unlock the message.Drafts (Menu 4.2.2)This folder stores text messages you have saved to send at a later time. When you select a message, it opens in Edit mode so that you can edit and send the message.Outbox (Menu 4.2.3)This folder stores text messages that the phone is attempting to send or has failed to send.The following icons are available to show the message status:• Being sent• Failed to be sent
48Menu functionsWhile viewing a message, press <Options> to access the following options:•Send again: retry sending the message.•Forward: forward the message to other people.•Cut address: extract URLs, e-mail addresses, or phone numbers from the message.•Delete: delete the message.•Protection: lock the message to protect it from being deleted, or unlock the message.Sentbox (Menu 4.2.4)This folder stores text messages that you have sent.While viewing a message, press <Options> to access the following options:•Forward: forward the message to other people.•Cut address: extract URLs, e-mail addresses, or phone numbers from the message.•Delete: delete the message.•Protection: lock the message to protect it from being deleted, or unlock the message. My folders (Menu 4.2.5)Use this menu to create new folders and organise your text messages.Creating a new folder1. Press <Yes>.2. Enter a folder name and press <OK>.Using folder optionsOn the folder list, press <Options> to access the following options:•Open: open the selected folder.•Create folder: add a new folder.•Rename folder: change the folder name.•Delete: delete the selected folder.Templates (Menu 4.3)Use this menu to make and use templates of frequently used messages.Creating a template1. Select an empty location.
49Menu functions Messages (Menu 4)2. Enter a message and press <OK>.Using template optionsFrom the template list, press <Options> to access the following options:•Edit: edit the selected template.•Send message: create and send a text message using the template.•Delete: delete the selected template.•Add new: add a new template.Delete all (Menu 4.4)Use this menu to delete messages in each message folder all at once.1. Press [Centre] to select the message folders to be cleared.Pressing the key twice displays the message types so that you can specify the ones to be cleared.2. Press <Delete>.3. Press [Centre] to select the check box to delete protected messages, and then press <Yes>.4. Press <Yes> to confirm the deletion.Settings (Menu 4.5)Use this menu to set up various options for using SMS and CB messages.Text messages (Menu 4.5.1)You can configure SMS settings.•Sending options: set up the options for sending SMS messages:Send read receipt: allow recipients to reply to you through your SMS server. Send delivery receipt: set the network to inform you when your messages have been delivered. Character support: select a character encoding type. If you select Automatic, the phone switches the encoding type from GSM-alphabet to uni-code if you enter a Unicode character. Use of Unicode encoding will reduce the maximum number of characters in a message to about half. If this menu
50Menu functionsis not shown, your phone provides automatic character encoding by default.Bearer selection: select either GSM or GPRS preferred, depending on your network.•Receiving options: activate 3D vivid view mode for displaying received SMS messages on your phone. The phone will convert message text to 3D vivid graphics and displays it in 3D view mode. This option is available only when the message consists of a single page.•Block list: store the phone numbers from which you want to reject messages.•Current profile: select an SMS setting profile.•Profile settings: set the properties of each profile.Service centre: store or change the number of your SMS server. Default destination: enter the default destination.Default type: set the default message type. The network can convert the messages into the selected format.Default validity: set the length of time your messages are stored in the SMS server.Setting name: enter a profile name.Broadcast messages (Menu 4.5.2)You can change the settings for receiving CB messages.•Receive: select to receive CB messages, or not.•Channel list: indicate the channels from which you wish to receive CB messages. Please contact your service provider for further details.•Language: select the preferred languages in which CB messages display.Memory status (Menu 4.6)Use this menu to view the amount of memory currently in use in each message folder.
51Menu functions i-mode (Menu 5)i-mode (Menu 5)In this menu, you can use the i-mode browser, send or receive i-mode mails and MMS messages, and access Java applications.To access this menu, press [Centre] in Idle mode and select i-mode. You can also quickly access this menu by pressing <i-mode> in Idle mode. i-Menu (Menu 5.1)Use this menu to access the i-mode browser. You can also quickly launch the browser by pressing and holding [Centre] in Idle mode.About i-modeIn i-mode, browse through your favourite magazines, book tickets and hotels for your vacations, find your favourite club, download the best ringtones and games at the lowest price, send live e-mails with photographs. You can do all of these economically since with i-mode you are charged by the amount of data you send and receive, not by the length of time you are online. Navigating the i-mode browserUsing browser optionsFrom any web page, press <Options> to access the following options:•Add Bookmark: add a bookmark for the current page.•Save Page: save the URL address of the current page.•Save Image: save images from the current page.To Pressscroll through browser items [Up] or [Down]. select an item [Centre]. return to the previous page [Left] or [C].• Key operations on an i-mode screen depend on the screen contents at that time.• You can answer a call while using the i-mode feature. After ending the call, the display returns to the function screen you were using.
52Menu functions•Show Properties: access the properties for the i-mode browser.•Bookmark List: access the bookmark list.•Go to Webpage: enter a URL address or select one from the Address history list.•Saved Page List: access the list of the URL addresses you have saved.•Browser Settings: change the settings for the i-mode browser to suit your preferences.p. 62•i-Menu: access the homepage of your service provider.•Home: return to the homepage.•Reload: update the current page.•Compose Mail: send the URL address of the current page via i-mail or i-MMS.•Save in Contacts: save the selected phone number or e-mail address to Contacts.•Play Animation: play animations on the current page.•Sound Effect: turn the sound effect on or off.Exiting the i-mode browserTo exit the browser at any time, press [ ].Mail (Menu 5.2)Use this menu to use i-mail and i-MMS message services. You can quickly access this menu by pressing <i-mail> in Idle mode.Compose iMail (Menu 5.2.1)You can create and send a mail, attaching various types of media files.Creating and sending an i-mail1. Press [Centre]. 2. Enter a phone number or e-mail address and press [Centre].3. Press [Down] and then [Centre].4. Enter the mail title and press [Centre].5. Select the attachment field.6. Use the following options to add files:
53Menu functions i-mode (Menu 5)•Attach File: add images, sounds, videos, music files, name cards, or schedule items.•Attach Melody: add MFi (Melody Format for i-mode) melody files.•Attach Bookmark: add URL addresses you have bookmarked.You can delete or preview the added items by selecting Delete Attach File or Play/Display File.7. Press [Down] and then [Centre].8. Enter the mail text and press [Centre]. To insert pictograms into text, press <Options> and select Pictogram.You can use the copy and paste feature to quickly and easily enter text.next section9. When you have finished, select Send to send the mail.Copying and pasting text1. While entering text in a mail, place the cursor next to the text you want to copy.2. Press <Options> and select Copy messages. 3. Press <Copy On>.4. Highlight the text as you want by pressing the Navigation keys and press [Centre].5. Select Copy to copy the highlighted text. You can also copy all text in the message by selecting Copy all.6. Place the cursor where you want to paste the copied text.7. Press <Options> and select Paste.Using mail optionsWhile creating a mail, press <Options> access the following options:•Send: send the mail.•Save: save the mail to the Draft box.According to the Digital Rights Management (DRM) system, web content may not be able to be forwarded.
54Menu functions•Add Address: add destination numbers or addresses. •Address Menu: edit destination numbers or addresses. You can change the selected number or address to another, or change an address type (To, Cc, Bcc).•Attach File Menu: add media files, name cards, schedule items, or bookmarks.•Attach Signature: attach your signature, as specified in the Edit signature option of Mail settings.•Delete Body: delete the body of the mail.•Delete Message: cancel composing the mail.Compose iMMS (Menu 5.2.2)Using Multimedia Message Service (MMS), you can send and receive i-MMS messages containing a combination of text, image, video, and audio, from phone to phone or from phone to e-mail.Creating and sending an i-MMS message1. Press [Centre]. 2. Enter a phone number or e-mail address and press [Centre].3. Press [Down] and then [Centre].4. Enter the message title and press [Centre].5. Select the SMIL field.6. Use the following options for creating an SMIL slide:•Send: send the message.•Save: save the message in the Draft folder.•Preview: view the message as it will be shown on the recipient’s phone.•Media: add text, images, sounds, or videos. •Fit mode: select the size in which the image displays. Hidden: the image displays in its actual size.Fill: the image is scaled to fit into the display area.According to the Digital Rights Management (DRM) system, web content may not be able to be forwarded.
55Menu functions i-mode (Menu 5)Meet: the image is scaled so that the longer side, either the height or width, fits the corresponding side of the display area. Slice: the image is scaled so that the shorter side, either the height or width, fits the corresponding side of the display area. •Options: change the display time for each item in the message, such as a slide, text, image, or audio clip.•Arrange Slide: customise slide settings.Text Color: select a colour for the message text.Background Color: select a colour for the slide background.Change Region Size: change the size of the image area. Press [Up] or [Down] to move the border line.Swap Position: switch the order of the added image and text.•Slide: add or delete slides.Add: add a new slide after the currently selected slide. Once you have added slides, you can scroll between them by pressing [Left] or [Right].Insert: insert a new slide before the currently selected slide.Delete: delete the selected slide.Clear: clear the content of the selected slide.7. When you have finished, on the slide preview screen, press <Options> and select Send to send the message.Using message optionsWhile creating an i-MMS message, you can access a variety of options by pressing <Options>.p. 53Inbox (Menu 5.2.3)Use this menu to access i-mails and i-MMS messages you have received.When the Inbox reaches its maximum limit, newi-mails or i-MMS messages will overwrite old messages that have already been read.
56Menu functionsViewing a message1. Select a folder.2. Select a message.3. Press [Left] or [Right] to scroll through slides.Using message optionsWhile viewing an i-mail or i-MMS message, press <Options> to access the following options:•Reply: send a reply to the sender or all of the recipients of the message. You can also send a reply with the message included.•Forward: forward the message to other people.•Move: move the message to another folder.•Delete: delete the message.•Protect On/Off: protect the message from being deleted.•Save in Contacts: save the sender’s address or phone number to Contacts.•Save Melody: save the MFi (Melody Format for i-mode) melody files attached to the message.•Save Attached File: save the attached files in the phone’s memory.•Copy: copy the message title or sender’s address. You can also copy the text of the mail.•Play SMIL: play the SMIL slides of an i-MMS message automatically.•Browse SMIL: play the SMIL slides of an i-MMS message manually. Press [Left] or [Right] to move to the next slide.On the message list, press <Options> to access the following options:•Move: move the selected message to another folder.•Delete: delete the selected message.•Selective Delete: delete the messages you select.•Delete All: delete all messages.•Protect On/Off: protect the message from being deleted.•Sort: sort messages by title, address, or date.
57Menu functions i-mode (Menu 5)•Filter: set messages to be displayed by the selected filter.•Export: save the selected message in the phone’s memory. The message is saved in the My vMessages folder.p. 67Sent (Menu 5.2.4)Use this menu to access the i-mails and i-MMS messages you have sent.While viewing a message, press <Options> to access the following options:•Edit: edit the message and then send it.•Delete: delete the current message.•Protect On/Off: protect the message from being deleted.•Save in Contacts: save the sender’s address or phone number to Contacts.•Copy: copy the message’s title or sender’s address.•Play SMIL: play the SMIL slides of an i-MMS message.•Browse SMIL: play the SMIL slides of an i-MMS message manually. Press [Left] or [Right] to move to the next slide. On the message list, press <Options> to access the following options:•Edit: edit the message.•Delete: delete the selected message.•Selective Delete: delete the messages you select.•Delete all: delete all messages.•Protect On/Off: protect the message from being deleted.•Sort: sort messages by title, address, or date.•Filter: set messages to be displayed by the selected filter.•Export: save the selected message in the phone’s memory. The message is saved in the My vMessages folder. p. 67
58Menu functionsDraft (Menu 5.2.5)Use this menu to access i-mails and i-MMS messages you have saved or failed to send.When you select a message in the Draft box, the message opens in Edit mode so that you can edit and send the message.Check New Mail (Menu 5.2.6)Use this menu to check the i-mode server for new i-mails and i-MMS messages and then retrieve them to the phone.Mail Settings (Menu 5.2.7)Use this menu to change the various settings for sending and receiving i-mails and i-MMS messages.•Communication: change the settings for sending or receiving messages.Auto Receive: set the phone to retrieve new messages from the i-mail server as soon as they arrive at the server.Receive Attach File: select the types of attachments you want to receive. •Edit: edit your signature or a quotation of your messages.Edit Signature: enter a tag line to be inserted at the end of your message. If you select Auto Attach, the signature will be automatically attached to all of your outgoing messages.Edit Quotation: enter characters or words to be inserted at the start of your original mail when you reply to or forward a message.•View: change the view settings.Screen Scroll: select the number of lines a message displays.Font Size: select a font size to be used for displaying messages.List Display: select the number of lines and the type of information, for example, subject or address, to be displayed on the list.Folder Security: locks message folders to protect them from unauthorised viewing.Auto Play: set a sound, video, or SMIL slide to be automatically played when you open a message.
59Menu functions i-mode (Menu 5)Pasted Data: set MFi (Melody Format for i-mode) melody files or links to java resources to be inserted when you are creating a message. The added data, however, will be sent as a data format attachment.•Check Settings: check your current mail settings.•Reset Settings: restore the default settings.•Check Storage: check the total amount of memory and the amount of memory currently in use in each message folder.Java (Menu 5.3)Use this menu to download and play games and Java applications from various sources using the i-mode browser.On the Java application list, press <Options> to access the following Java system options:•Create Folder: create a folder•Delete Folder: delete the selected folder.•Rename Folder: change the name of the folder.•Move To Folder: move the selected Java application to another folder.•Upgrade: update the selected Java application.•Delete: delete the selected Java application.•Delete All: delete all Java applications.•Sort: sort Java applications by name, time, used memory.•Properties: access the Java application properties.•Certificate: access the Java application certificate.•Network Setting: select whether or not the Java application connects to the network when it runs, if the selected one is an online application.•i-Appli To Setting: set whether or not the selected Java application accesses the website to run. This option is available only when the LaunchByBrowser key or the AllowPushBy key is present in the ADF.
60Menu functions•Icon Info Setting: set whether or not your phone operates the selected Java application using phone system information. This option is available only when the GetSysInfo key is present in the ADF.•AutoStart Setting: select whether or not the Java application launches automatically when selected.•Show Desc Setting: set whether or not the description of a Java application is displayed before downloading.•AutoStart Failure: set whether or not the Java application launches automatically after the launch fails.•Trace Info.: access trace information for a Java application.•System Info: access system information for a Java application.SMS (Menu 5.4)Use this menu to create and send text messages.p. 45Bookmarks (Menu 5.5)Use this menu to access URL addresses of websites you have bookmarked while navigating the wireless web.Press <Options> to access the following options:•Go To: go to the bookmarked page.•Title: edit the title of the bookmark.•Delete: delete the selected bookmark.•Selective Delete: delete the messages you select.•Delete All: delete all bookmarks.•Show Address: display URL addresses you have bookmarked.•Copy Address: copy the URL address of the bookmark.•Compose Mail: send the bookmark via i-mail or i-MMS.•Send via Infrared: send the bookmark via the infrared port.
61Menu functions i-mode (Menu 5)Go to Webpage (Menu 5.6)Use this menu to access a specific website by manually entering a URL address or selecting one from the Address history list.Saved Pages (Menu 5.7)Use this menu to access the web pages you have saved.While viewing a web page, press <Options> to access the following options:•Save Image: save images from the current page.•Show Properties: access various page and server properties.Address: display the URL address of the current page.Page Properties: access the properties of the current page.Certificates: access the server certificate.•Play Animation: play animations on the current page.•Sound Effect: turn the sound effect on or off.•Edit Title: change the title of the page.•Delete: delete the page.•Protect On/Off: protect the page from being deleted.From the web page list, press <Options> to access the following options:•Show: open the selected page.•Edit Title: change the title of the selected page.•Delete: delete the selected page.•Selective Delete: delete the messages you select.•Delete All: delete all saved pages.•Show Address: display the address of the web page.•Protect On/Off: protect the page from being deleted.
62Menu functionsBrowser Settings (Menu 5.8)Use this menu to change the settings for the i-mode browser to suit your preferences.•Home: enable or disable the homepage of the i-mode browser.•View: change the view settings for text and display on web pages.Font Size: select a font size to be used for displaying text on web pages.Images: set whether or not the phone displays images on web pages.Table Layout: select a layout for the web page.Wrap Text: set whether the phone wraps text on web pages to fit your phone’s display, or displays text as it is on the web page.CSS: set whether or not the phone uses a style sheet for presenting documents on a web page.Screen Scroll: select the number of lines the web page displays.•Certificates: view the list of server certificates you have received while navigating the wireless web, or switch the selected certificate from valid to invalid, or vice versa.•Others: change other settings.Connection Timeout: set the phone to disconnect from the network after a specified length of time of inactivity.Send Terminal Info: set whether or not the phone sends its information to the web server while navigating the wireless web.Auto Play: set whether or not the phone automatically plays videos after downloading.Sound Effect: turn the sound effect on or off.•Storage Device: select the default memory location, phone or memory card, for downloaded files.•Check Settings: check your current settings.•Reset Settings: restore the default settings.•Reset Data: reset data you have downloaded.
63Menu functions My files (Menu 6)My files (Menu 6) The My files menu allows you to access images, videos, music files, and sound files stored in the phone’s memory or on a memory card. You can also store decorative photo frames downloaded from the i-mode browser and i-mode messages downloaded from the i-mode server. To access this menu, press [Centre] in Idle mode and select My files.Images (Menu 6.1)This menu displays photos you have taken and images you have downloaded, received in messages, or imported from your computer. You can also store SWF (flash animation) files you have downloaded from the i-mode browser.Viewing an image1. Select an image folder.2. Select an image.Viewing a slide showYou can view your photos as a slide show, a sequential presentation of each photo in the current folder.1. Select My photos.2. Press <Options> and select Slide show.3. Select an interval option. The slide show begins.4. Press <Stop> to stop the slide show.Using image optionsWhile viewing an image, press <Options> to access the following options:•List: return to the image list.According to the Digital Rights Management (DRM) system, web content may not be able to be forwarded. They are indicated by .You cannot move or copy SWF files stored here to another folder or a memory card, and cannot send or receive them to/from other people.
64Menu functions•Send via: send the file via i-mail, i-MMS, or Bluetooth.•Set as: set the file as wallpaper for the displays or as a caller ID image for a Phonebook entry.•Edit: edit the image using the Image editor, if it is a photo taken by the camera on the phone.p. 40•Delete: delete the selected file or all files.•Rename: change the file name.•Move to: move the file to another folder or to a memory card.•Copy to memory card: copy the file to a memory card.•Bluetooth visibility: share the file or all files with other Bluetooth devices.•Protection: lock the file to protect it from being deleted, or unlock the file.•Print via Bluetooth: print the file by connecting the phone to a printer via Bluetooth. Some printers may not be compatible with the phone.•Details: access the file properties.Videos (Menu 6.2)This menu displays video clips you have recorded, downloaded, received in messages, or imported from your computer.Playing a video clip1. Select a video folder.2. Select a video clip.During playback, use the following keys:Video clips recorded on other devices, such as camcorders, may not play correctly.Key FunctionCentre Pauses or resumes playback.Left Moves backward in a file.Right Skips forward in a file./ Adjusts the volume.Down Stops playback.
65Menu functions My files (Menu 6)Using video optionsAfter playback, press <Options> to access the following options:•List: return to the video list.•Send via: send the file via i-mail, i-MMS, or Bluetooth.•Set as: set the file as your ringtone, as a caller ID image for a Phonebook entry, or as wallpaper for the main display.•Delete: delete the selected file.•Rename: change the file name.•Move to: move the file to another folder or to a memory card.•Copy to memory card: copy the file to a memory card.•Bluetooth visibility: share the file or all files with other Bluetooth devices.•Protection: lock the file to protect it from being deleted, or unlock the file.•Details: access the file properties.Music (Menu 6.3)This menu displays music files you have downloaded or imported from your computer.Select a file. The music player opens.p. 38 Sounds (Menu 6.4)This menu displays voice memos you have recorded, and sound files you have downloaded, received in messages, or imported from your computer. You can also store MFi (Melody Format for i-mode) melody files you have downloaded from the i-mode browser.Playing a sound clip1. Select a sound folder. 2. Select a sound clip. For a voice memo, see Voice recorder. p. 40• To set a video clip as a ringtone, the video clip must be recorded with audio.• To set a video clip as wallpaper, the video clip must be saved in 3GP format.
66Menu functionsUsing sound optionsWhile playing a sound clip, press <Options> to access the following options:•List: return to the sound list.•Send via: send the file via i-mail, i-MMS, or Bluetooth.•Set as: set the file as your ringtone or as a ringtone for a Phonebook entry.•Delete: delete the selected file.•Rename: change the file name.•Move to: move the file to another folder or to a memory card.•Copy to memory card: copy the file to a memory card, if you use.•Bluetooth visibility: share the file or all files with other Bluetooth devices.•Protection: lock the file to protect it from being deleted, or unlock the file.•Details: access the file properties.Frame (Menu 6.5) This menu displays decorative photo frames you have downloaded from the i-mode broswer. You can also take a photo with one of the downloaded frames.Taking a photo with a frame1. Select a frame.2. Press <Options> and select Take photo to turn on the camera.3. Press [] to take a photo. The photo is saved in the My photos folder.Using frame optionsFrom the frame list, press <Options> to access the following options:•View: display the frame.•Take photo: take a photo with the selected frame.•Delete: delete the selected file or all files.•Rename: change the file name.•Protection: lock the file to protect it from being deleted, or unlock the file.
67Menu functions My files (Menu 6)•Details: access the file properties.My vMessages (Menu 6.6) This menu displays i-mails or i-MMS messages you have saved from the i-mode server to the phone’s memory. Using i-mode message optionsFrom the message list, press <Options> to access the following options:•Import: retrieve the selected message from the i-mode server and open it.•Send via: send the message via Bluetooth.•Delete: delete the selected message or all messages.•Rename: change the message name.•Move to memory card: move the message to a memory card.•Copy to memory card: copy the message to a memory card.•Bluetooth visibility: share the message or all messages with other Bluetooth devices.•Protection: lock the message to protect it from being deleted, or unlock the message.•Details: access the message properties.Other files (Menu 6.7)Use this menu to view various document files and files stored in the phone’s memory without corruption. Available file formats are DOC, XLS, PPT, PDF, TXT, HTM, HTML, and MHT. Viewing a fileSelect a file. Picsel File Viewer runs to open the document.• Depending on the file size or memory capacity of Picsel File Viewer, a file may not open properly.• If a document file contains languages unsupported by Picsel File Viewer, the content of the document will not display correctly
68Menu functionsUse the following keys to view the document:Using document optionsWhile viewing a document, press <Options> or < > to access the following options:•Full screen view/Normal view: change the display to Full screen view or to Normal screen view.•Zoom: zoom in or out.•Fit to: fit the document to the page size, screen width, or screen height.•Go to: move to another page of the document.•Rotate: rotate the document.•Screen panning/Normal panning: change the panning mode to by screen or by preset pixel.•Hide controller/Show controller: (for Full screen view) hide or display the Viewer control bar.•Send via bluetooth: send the file via Bluetooth.•Move to memory card: move the file to a memory card.•Copy to memory card: copy the file to a memory card.•Delete: delete the selected file.•Rename: change the file name.•Bluetooth visibility: share the file or all files with other Bluetooth devices.Key FunctionUp/Down/Left/RightPans around the page./ Zooms in or out.Centre Fits the document to the page size.2Returns to the first page.4Returns to the previous page.5Rotates the document.6Moves to the next page.8Moves to the last page.Changes the display to Full screen view or Normal screen view.
69Menu functions Calendar (Menu 7)•Protection: lock the file to protect it from being deleted, or unlock the file.•Details: access the file properties.•Shortcuts: view the functions of the keys you can use in Picsel File Viewer. Memory card (Menu 6.8)Use this menu to access the files stored in a memory card. This menu is shown only when a memory card is inserted into the phone.Memory status (Menu 6.9)Use this menu to view memory information for media items in the phone’s memory or on a memory card. For the phone’s memory, press [Left] or [Right] to view the memory status by size or number of items.Calendar (Menu 7)The Calendar menu enables you to keep track of your schedule.To access this menu, press [Centre] in Idle mode and select Calendar.Selecting a day on the calendarWhen you enter the Calendar menu, the calendar in Month view appears with today’s date indicated by a blue box.• Press [Left] or [Right] to move by day.• Press [Up] or [Down] to move by week.• Press [ / ] to move by month.Creating an itemYou can store appointments, anniversaries, memos, and tasks on the calendar. More than one item per day can be stored.Your phone is preset to use FAT16-formatted memory cards. If you insert a FAT32-formatted memory card, the phone will ask you to reformat the memory card. If you do not, you will not be able to access the card from the phone.
70Menu functionsEntering an appointment1. Select a date on the calendar.2. Press <Options> and select Create → Appointment.3. Enter information or change the settings:•Subject: enter a title for the appointment.•Details: enter the appointment details.•Start date and Start time: enter the starting date and time for the appointment. •AM/PM: select AM or PM in 12-hour time format.•End date and End time: enter the ending date and time for the appointment. •AM/PM: select AM or PM in 12-hour time format.•Location: enter information about the appointment location. •Alarm: set an alarm for the appointment. •Before: set how long before the appointment the alarm is to alert you.•Alarm tone: select an alarm tone.•Repeat: set the appointment to recur and select a repeat option. •Until: set the ending date, if the appointment will recur. 4. Press <Save> to save the appointment.Entering an anniversary1. Select a date on the calendar.2. Press <Options> and select Create → Anniversary.3. Enter information or change the settings:•Occasion: enter information about the anniversary.•Date: enter the date.•Alarm: select to set an alarm for the anniversary.•Before: set how long before the anniversary the alarm is to alert you. •Alarm time: enter the time for the alarm to sound. •AM/PM: select AM or PM in 12-hour time format.
71Menu functions Calendar (Menu 7)•Alarm tone: select an alarm tone.•Repeat every year: set the phone to remind you of the anniversary every year.4. Press <Save> to save the anniversary.Entering a memo1. Select a date on the calendar.2. Press <Options> and select Create → Memo.3. Enter a memo and press <Save>.Entering a task1. Select a date on the calendar.2. Press <Options> and select Create → Task.3. Enter information or change the settings:•Task: enter information about the task.•Start date: enter the starting date.•Due date: enter the ending date.•Select priority: select a priority level.4. Press <Save> to save the task.Consulting the calendarOnce you have created items, the item icons and the number of items for a specific day appear at the bottom of the calendar.Viewing an item1. Select a date on the calendar to display the items for the day. 2. Select an item to view its details.3. Press [Left] or [Right] to access the other items scheduled for the selected day.While viewing an item, press <Options> to access the following options:•Edit: edit the item.•Create: add a new item.•Send via: send the item via SMS, i-mail, i-MMS, or Bluetooth.• Appointment • Anniversary• Task • Memo
72Menu functions•View by: change the view mode of the calendar.•Delete: delete the item.•Memory status: access memory information for the items stored on the calendar.Using calendar optionsOn the calendar, press <Options> to access the following options:•View by: change the view mode of the calendar.next section•Create: add a new item.p. 69•Go to: enter the specific date you want to access.•Event list: sort items by type of item.•Delete: delete the items stored on the calendar by using various deleting options.•Missed alarm events: view items whose alarms you have missed.•Memory status: access memory information for the items stored on the calendar.Viewing items in a different modeYou can change the calendar display to Day view or Week view. Press <Options> and select View by → a view mode.Day viewYou can view items for the selected date. Select an item to view its details.The following icons may display to indicate the item status:• Alarm set • Recurring item• To do item priority (Red: high, Blue: normal, Grey: low)• Completed taskWeek viewYou can view items for the selected week. A cell on the timetable indicates the presence of item information. Select a cell in the day you want.You can delete recurring events in Day view only.
73Menu functions Camera (Menu 8)Camera (Menu 8)You can use the camera module embedded in your phone to take photos and record videos.To access this menu, press [Centre] in Idle mode and select Camera, or press and hold []. Taking a photoYou can take photos in various modes. The camera produces JPEG photos. Taking a photo with the phone open1. Access the Camera menu or press and hold [] to turn on the camera.2. Make any desired adjustments.•Press <> to access camera options.next section• Use the keypad to change the camera settings or switch to other modes.p. 753. Press [] to take a photo. The photo is saved in the My photos folder.Using camera options in Capture modeIn Capture mode, press <> to access the following options:•Record video: switch to Record mode.•Shooting mode: take a photo in the following modes:• Do not take photos of people without their permission.• Do not take photos in a place where cameras are not allowed.• Do not take photos in a place where you may interfere with another person’s privacy.When you take a photo in direct sunlight or in bright conditions, shadows may appear on the photo.4.To Pressaccess photo options <Options>.p. 75delete the photo [C].return to Capture mode <Preview>.
74Menu functionsSingle shot: take a photo in normal mode. You can select whether or not the camera automatically saves a photo.Multi-shot: take a series of action stills. You can select the number of photos the camera will take and the shooting speed.Mosaic shot: take several stills and save them in one frame. You can select the layout.•Effects: change the colour tone or apply a special effect.•Frames: apply a decorative frame. •Timer: set a time delay before the camera takes a photo.•Go to My photos: access the My photos folder.•Settings: change the default settings for taking a photo.Size: select an image size. Quality: select an image quality setting. Viewfinder: select a preview screen.Scene programs: set whether or not to use Night shot mode.Shutter sound: select the sound that you hear when you press the shutter release, [].Zoom sound: turn the sound effect for zooming on or off.Brightness sound: turn the sound effect for brightness adjustment on or off.White balance: adjust the colour balance of the image. You can make your photo appear warmer or cooler.ISO: change the ISO setting, which controls the sensitivity of your camera. For low light situations, select a higher ISO number. The higher the ISO number, the faster the camera shutter functions and the more sensitive the camera is to light. Higher ISO settings may bring some distortion to an image.•Camera shortcuts: view the functions of the keys you can use in Capture mode.
75Menu functions Camera (Menu 8)Using the keypad in Capture modeYou can use the keypad to customise your camera settings in Capture mode.Using photo optionsAfter saving a photo, press <Options> to access the following options:•Viewfinder: return to Capture mode.•Send via: send the file via i-mail, i-MMS, or Bluetooth.•Set as: set the photo as wallpaper for the displays or as a caller ID image for a Phonebook entry.•Edit: edit the photo using the Image editor.p. 40•Delete: delete the file.Key FunctionLeft/Right Adjusts the brightness.Up/Down Zooms in or out.Flips the image vertically.Shows the mirror image.1Switches to Record mode.p. 762Changes the image size.3Changes the image quality.4Changes the shooting mode.5Changes the colour tone or applies a special effect.6Changes the ISO setting.7Selects a decorative frame.8Sets the timer.9Goes to the My photos folder.Changes the preview screen.0Determines the use of the flash.Changes the white balance.Key Function
76Menu functions•Rename: change the file name.•Go to My photos: access the My photos folder. p. 63•Protection: lock the file to protect it from being deleted, or unlock the file.•Print via Bluetooth: print the file by connecting the phone to a printer via Bluetooth. Some printers may not be compatible with the phone.•Details: access the file properties.Taking a photo with the phone closed1. Press and hold []. 3. Press [] to take a photo. The photo is automatically saved.Recording a videoYou can record a video of what is displayed on the camera screen and save it.Recording a video with the phone open1. In Capture mode, press [1].2. Make any desired adjustments.•Press <> to access camera options.next section• Use the keypad to change the camera settings. p. 773. Press [] to start recording.4. Press [Centre] or [] to stop recording. The video is automatically saved in the My video clips folder.2.To Pressflip the image vertically [ ].show the mirror image [ ].adjust the brightness [ ].zoom in or out [ ].5.To Pressplay back the video clip [Centre].access video options <Options>.return to Record mode <Preview>.
77Menu functions Camera (Menu 8)Using camera options in Record modeIn Record mode, press <> to access the following options:•Take photo: switch to Capture mode.•Effects: change the colour tone or apply a special effect.•Timer: set a time delay before the camera starts recording.•Go to My video clips: access the My video clips folder.•Settings: change the following settings for recording a video:Recording mode: select a video recording mode.Select Limit for i-mms/Wallpaper to record a video suitable for an i-mail or i-MMS message or for setting as wallpaper. The video clip is saved in 3GP format.Select Normal to record a video within the limit of the currently available memory. The video clip is saved in MP4 format.Size: select a frame size. Quality: select an image quality setting. Viewfinder: select a preview screen.Audio record: record audio with a video clip.Zoom sound: turn the sound effect for zooming on or off.Brightness setting tone: turn the sound effect for brightness adjustment on or off.White balance: adjust the colour balance of the image. You can make your video appear warmer or cooler.•Camcorder shortcuts: view the functions of the keys you can use in Record mode.Using the keypad in Record modeYou can use the keypad to customise your camera settings in Record mode.Key FunctionLeft/Right Adjusts the brightness.Up/Down Zooms in or out.
78Menu functionsUsing video optionsAfter saving a video clip, press <Options> to access the following options:•Viewfinder: return to Record mode.•Send via: send the file via i-mail, i-MMS, or Bluetooth.•Set as: set the file as your ringtone, as a caller ID image for a Phonebook entry, or as wallpaper for the main display.•Delete: delete the file.•Rename: change the file name.•Go to My video clips: access the My video clips folder.p. 64•Protection: lock the file to protect it from being deleted, or unlock the file.•Details: access the file properties.Recording a video with the phone closed1. Press and hold [].2. Press and hold [ ] to switch to Record mode. Flips the image vertically.Shows the mirror image.1Switches to Capture mode.p. 732Changes the frame size.3Changes the image quality.4Changes the video recording mode.5Changes the colour tone or applies a special effect.7Mutes or unmutes audio.8Sets the timer.9Goes to the My video clips folder.Changes the preview screen.0Determines the use of the flash.Changes the white balance.Key Function
79Menu functions Settings (Menu 9)4. Press [] to start recording.5. Press [] to stop recording. The video clip is automatically saved.Settings (Menu 9)The Settings menu provides you with various setting options to customise the phone to your preferences and needs. You can also reset the settings to their default status.To access this menu, press [Centre] in Idle mode and select Settings.Time and date (Menu 9.1)Use this menu to change the time and date displayed on your phone. Before setting the time and date, specify your time zone in the World clock menu. p. 42•Set time: enter the current time. •AM/PM: select AM or PM in 12-hour time format.•Time format: select a time format.•Set date: enter the current date.•Calendar starting day: set which day of the week the calendar starts with.Phone settings (Menu 9.2)Many different features of your phone’s system can be customised to suit your preferences.Language (Menu 9.2.1)Use this menu to select a language for the display text. If you select Automatic, the phone uses the same language as the SIM card.3.To Pressflip the image vertically [ ].show the mirror image [ ].adjust the brightness [ ].zoom in or out [ ].
80Menu functionsGreeting message (Menu 9.2.2)Use this menu to enter the greeting that is displayed briefly when the phone is switched on.Shortcuts (Menu 9.2.3)You can use the Navigation keys as shortcuts to access specific menus directly from Idle mode. Use this menu to assign a shortcut to a key.Assigning a shortcut menu1. Select a key to be used as a shortcut key.2. Select a menu to be assigned to the key.Using shortcut optionsPress <Options> to access the following options:•Change: assign or change a shortcut menu.•Remove: deactivate the shortcut assignment to the selected key.•Remove all: deactivate all shortcut assignments.Volume key (Menu 9.2.4)Use this menu to set whether the phone mutes the call ringer or rejects a call if you press and hold [ / ] when a call comes in.Extra settings (Menu 9.2.5)You can turn the automatic redialling or answering feature on or off, and lock the external keys.•Auto redial: set the phone to make up to ten attempts to redial a phone number after an unsuccessful call.•Active flip: answer an incoming call by opening the phone.•Anykey answer: answer an incoming call by pressing any key, except for [ ] and <Reject>. •Cover keypad lock: lock the exposed keys to keep accidental presses from affecting your phone’s operation when the phone is closed.Display settings (Menu 9.3)Use this menu to change settings for the display and backlight.
81Menu functions Settings (Menu 9)Wallpaper (Menu 9.3.1)You can set up the idle screen on both displays.•Main display: select an image or video clip to be displayed on the main display.•Cover display: select an image to be displayed on the external display.•Text position: select a text position. If you don’t want to display text in Idle mode, select Off.•Text mode: select a font style.•Text colour: select a font colour.•Graphic logo: set the phone to display a graphic icon instead of the service provider’s logo on the idle screen. This is only available if a graphic icon has been received in a message.Skin (Menu 9.3.2) You can select a skin colour pattern for Menu mode.Brightness (Menu 9.3.3)You can adjust the brightness of the main display for varying lighting conditions.Dialling display (Menu 9.3.4) Use this menu to select a font colour for the numbers entered while dialling.Show caller information (Menu 9.3.5)Use this menu to set the phone to display missed call notifications with the most recently missed caller’s information. To set the external display to show caller information, select Also on cover display.TV-out settings (Menu 9.3.6)Use this menu to select the video system for a TV.Sound settings (Menu 9.4)Use this menu to customise various sound settings.Incoming call(Menu 9.4.1)Use this menu to change the sound settings for incoming calls.•Ringtone: select a ringtone to be used for the call ringer.•Volume: select a ringtone volume.
82Menu functions•Alert type: specify how you are to be informed of incoming calls.Keypad tone (Menu 9.4.2)Use this menu to select the tone that the phone sounds when you press a key. Message tone (Menu 9.4.3) Use this menu to change the sound settings for incoming SMS messages, i-mails, i-MMS messages, and CB messages individually. •Tone: select one of several message tones. •Alert type: specify how you are to be informed when a message comes in.•Repetition: specify how often the phone informs you of a new message.Power on/off (Menu 9.4.4)Use this menu to select the melody that the phone sounds when it is switched on or off. Flip tone (Menu 9.4.5)Use this menu to select the tone that the phone sounds when you open or close the phone. Quiet mode (Menu 9.4.6)Use this menu to set how the phone acts to alert you to a specific event while in Quiet mode. Extra tones (Menu 9.4.7) Use this menu to customise additional tones for the phone. •Minute minder: set the phone to beep every minute during an outgoing call to keep you informed of the length of your call.•Connection tone: set the phone to beep when an outgoing call is connected to the system.•Alert on call: set the phone to beep when you receive a new message or when the time for an alarm comes during a call.•Indicative tone: set the phone to beep when you have made a mistake or something wrong happens on the phone.You can adjust the key tone volume using [/] in Idle mode.
83Menu functions Settings (Menu 9)Light settings (Menu 9.5)Use this menu to change the settings for the light.Backlight time (Menu 9.5.1) You can change the settings for backlight and icons.•Main display normal: select the length of time the backlight stays on.•Main display dim: select the length of time the display stays on in Dim mode after the backlight turns off. After a specified time, the display turns off.•Show cover indicators: set whether or not the cover display icons are shown on the external display.Keypad light (Menu 9.5.2)Use this menu to set how the phone controls the use of the keypad light. Select one of the following options in the Use at line:•Any time: the keypad light is always used.•Night time: the keypad light is used only between 5:00 PM and 9:00 AM.•Custom time: you can specify the time period that the keypad light is used.Network services (Menu 9.6)Use this menu to access network services. Please contact your service provider to check their availability and subscribe to them, if you wish.Call diverting (Menu 9.6.1)This network service reroutes incoming calls to a phone number that you specify.1. Select a call diverting option:•Divert always: divert all calls.•Busy: divert calls when you are on another call.•No reply: divert calls when you do not answer the phone.•Unreachable: divert calls when you are not in an area covered by your service provider or when your phone is switched off.•Cancel all: cancel all call diverting options.2. Select the type of calls to be diverted.
84Menu functions3. Select Activate. To deactivate call diverting, select Deactivate.4. Move to the Divert to line.5. Enter the number to which calls are to be diverted.6. If you selected No reply, move to the Seconds line and select the length of time the network delays before diverting a call.7. Press <Select>.Call barring(Menu 9.6.2)This network service allows you to restrict your calls.1. Select a call barring option:•All outgoing calls: prohibit all outgoing calls.•International: prohibit international calls.•International except home: only allow calls to numbers within the current country when you are abroad, and to your home country.•All incoming calls: prohibit incoming calls.•Incoming while abroad: prohibit incoming calls when you use your phone outside of your home country.•Cancel all: cancel all call barring settings, allowing calls to be sent and received normally.•Change barring password: change the call barring password obtained from your service provider.2. Select the type of calls to be barred. 3. Select Activate. To deactivate call barring, select Deactivate.4. Enter the call barring password supplied by your service provider and press <Select>.Call waiting(Menu 9.6.3)This network service informs you when someone is trying to reach you while you are on another call.1. Select the type of calls to which call waiting option will apply.2. Select Activate. To deactivate call waiting, select Deactivate.
85Menu functions Settings (Menu 9)Network selection (Menu 9.6.4)This network service allows you to either automatically or manually select the network to be used while roaming outside of your home area. You can select a network other than your home network only if there is a valid roaming agreement between the two.Caller ID (Menu 9.6.5)This network service allows you to hide your phone number from the person you are calling. If you select Default, the phone will use the default setting provided by the network.Voice mail server (Menu 9.6.6)Use this menu to store the number of the voicemail server and access your voicemails.•Connect to voice server: connect to the voicemail server to listen to your voicemails.•Voice server number: change the voicemail server number.Closed user group (Menu 9.6.7)Use this menu to set incoming and outgoing calls to be restricted to a selected user group. For details about how to create a closed user group (CUG), contact your service provider.•Index list: add, delete, or activate CUG index numbers. •Outside access: enable calls to numbers other than those in the closed user group. This feature depends on the nature of your CUG subscription.•Default group: enable the default CUG, if you have set one with your service provider. When making a call, you are given the option of using your default CUG, instead of selecting one from the list.Some networks may not allow you to change this setting.You must store the voicemail server number before accessing the server. Your service provider can give you the number.
86Menu functionsBluetooth (Menu 9.7) Using the Bluetooth feature, you can connect the phone wirelessly to other Bluetooth devices and exchange data with them, talk hands-free, or control the phone remotely.Bluetooth technology allows free wireless connections between all Bluetooth-compliant devices within a range of 10 metres. Since the devices communicate using radio waves, they do not need to be in line of sight to each other.Setting up the Bluetooth featureThe Bluetooth menu provides the following options:•Activation: activate or deactivate the Bluetooth feature.•My devices: search for connectable Bluetooth devices. •My phone’s visibility: allow other Bluetooth devices to search for your phone.•My phone’s name: assign a Bluetooth device name to your phone, which is then displayed on other devices.•Secure mode: determine if the phone asks for your confirmation when other devices access your data.•Bluetooth services: display available Bluetooth services. Searching for and pairing with a Bluetooth device1. From the Bluetooth menu, select My devices.2. Select Search for new devices.• If there are obstacles between the devices, the operating distance may be reduced.• It is recommended that you do not use the Bluetooth feature while using multimedia features, such as voice recorder, camera, and music player, or vice versa, for better performance.• Some devices may not be compatible with your phone.
87Menu functions Settings (Menu 9)After searching, a list of devices to which you can connect displays. The following icons indicate the type of device:The colour of the icon indicates the status of the the device:• Grey for unpaired devices• Blue for paired devices• Red for devices that are currently connected to your phone3. Select a device.4. Enter a Bluetooth PIN and press <OK>. This code is used just once and you do not need to memorise it.When the owner of the other device enters the same code, pairing is complete.Using device optionsFrom the device list, press <Options> to access the following options: •Connect: connect to a headset or hands-free car kit.•Disconnect: end the connection with the connected device.•Browser files: search for data from the device and import data directly to your phone.•Service list: access the Bluetooth service list of the device.•Rename: rename the paired device.•Authorise device/Unauthorise device: determine whether or not the phone asks you to permit connection when other devices try to connect to your phone.• Stereo headset • Printer• Computer • PDA• Mobile phone • Unknown device• Mono headset/Hands-free car kitSome devices, especially headsets or hands-free car kits, may have a fixed Bluetooth PIN, such as 0000. If the other device has a code, you must enter it.
88Menu functions•Delete: remove the selected device or all devices from the list.Sending data via Bluetooth1. Activate the Bluetooth feature.2. Select the application in which the item you want to send is stored. 3. Scroll to the item you want.4. Press <Options> and select Send via → Bluetooth → Search for new devices.The phone searches for devices within range and displays a list of available devices.5. Select a device.6. If necessary, enter the Bluetooth PIN needed for pairing and press <OK>.Receiving data via BluetoothTo receive data via Bluetooth, your phone’s Bluetooth feature must be active and its visibility must be enabled.1. If an unauthorised Bluetooth device sends data to your phone, press <Yes> to allow the device to access your phone.2. Press <Yes> to receive data.Security (Menu 9.8)Use this menu to protect the phone against unauthorised use by managing the several access codes of your phone and SIM card.PIN check (Menu 9.8.1)The 4- to 8-digit PIN (Personal Identification Number) protects your SIM card against unauthorised use. When this feature is enabled, the phone requires your PIN each time it is switched on.If you enter an incorrect PIN/PIN2 three times, the SIM card is blocked. To unblock it you need to enter your PUK/PUK2 (Personal Unblocking Key). The codes are supplied by your service provider.
89Menu functions Settings (Menu 9)Change PIN code (Menu 9.8.2) Use this menu to change your PIN. The PIN check feature must be enabled to change the PIN.Phone lock (Menu 9.8.3) Use this menu to lock the phone from unauthorised use. When this feature is enabled, you must enter a 4- to 8-digit phone password each time the phone is switched on.The password is preset to 00000000. To change the password, use the Change password menu.Change password(Menu 9.8.4)Use this menu to change your phone password. Privacy(Menu 9.8.5)Use this menu to lock access to messages, files,i-mode access, or all menu functions on the phone, except for call functions. When a privacy option is enabled, you must enter the phone password to access the locked items or functions. SIM lock(Menu 9.8.6)This menu allows your phone to work only with the current SIM by assigning a SIM lock code. You must enter the SIM lock code to use a different SIM card.Fixed dialling mode (Menu 9.8.7) If supported by your SIM card, Fixed Dialling Number (FDN) mode restricts your outgoing calls to a limited set of phone numbers. When this feature is enabled, you can make calls only to phone numbers stored on the SIM card.Change PIN2 code (Menu 9.8.8)Use this menu to change your current PIN2, if supported by your SIM card. i-mode settings (Menu 9.9)Use this menu to create and customise the i-mode profiles containing the settings for accessing the i-mode browser or sending i-mails and i-MMS messages.
90Menu functionsProfile settings (Menu 9.9.1) You can create an i-mode profile.1. Press [Left] or [Right] to select a profile.2. Enter information for the profile.•Profile name: enter a profile name.•Proxy host - imode: enter the host of the proxy server for accessing the i-mode browser.•Proxy host - streaming: enter the host of the proxy server for accessing the streaming server.•Proxy port - imode: enter the port number of the proxy server for accessing the i-mode browser.•Proxy port - streaming: enter the port number of the proxy server for accessing the streaming server.•SSL port: enter the port number of the SSL (Secure Sockets Layer) server.•Portal URL: enter the URL address for the startup page of the i-mode browser.•Location server URL: enter the URL address of the preferred page of the i-mode browser.•Mail server: enter the URL address of the i-Mail server.•MMS server: enter the URL address of the i-MMS server.•APN: enter the access point name used for the address of the GPRS network.•User ID: enter the user ID.•User password: enter the password.3. Press <Save>.Save new content to (Menu 9.9.2)You can select a default memory location for saving downloaded files. If you select Always ask, the phone will ask you to select a memory location each time you save a file.Your phone is suited for connecting to the network by default. If you change the settings without first checking with your service provider, the i-mode browser, i-mail, and i-MMS features may not work properly.
91Reset settings (Menu 9.10) Use this menu to reset the phone’s settings you have changed.1. Press [Centre] to select the setting categories to be reset. 2. Press <Reset>.3. Press <Yes> to confirm the reset.4. Enter the phone password and press <OK>.Solve problemsHelp and personal needsTo save the time and expense of an unnecessary service call, perform the simple checks in this section before contacting a service professional.When you switch on your phone, the following messages may appear:“Insert SIM”• Be sure that the SIM card is correctly installed.“Enter password”• The automatic locking function has been enabled. You must enter the phone’s password before you can use the phone.“Enter PIN”• You are using your phone for the first time. You must enter the PIN supplied with the SIM card.• The PIN check feature is enabled. Every time the phone is switched on, the PIN has to be entered. To disable this feature, use the PIN check menu.The password is preset to 00000000. You can change this password.p. 89
92Solve problems“Enter PUK”• The PIN has been entered incorrectly three times, and the SIM card is now blocked. Enter the PUK supplied by your service provider.“No service,” “Network failure,” or “Not done” displays• The network connection has been lost. You may be in a weak signal area. Move and try again.• You are trying to access an option for which you have no subscription with your service provider. Contact the service provider for further details.You have entered a number but it was not dialled• Be sure that you have pressed [ ].• Be sure that you have accessed the right cellular network.• Be sure that you have not set an outgoing call barring option.Your correspondent cannot reach you• Be sure that your phone is switched on. ([ ] pressed for more than one second.)• Be sure that you are accessing the correct cellular network.• Be sure that you have not set an incoming call barring option.Your correspondent cannot hear you speaking• Be sure that you have switched on the microphone.• Be sure that you are holding the phone close enough to your mouth. The microphone is located at the bottom of the phone.The phone starts beeping and “Warning. Low battery” flashes on the display• Your battery is insufficiently charged. Recharge the battery.The audio quality of the call is poor• Check the signal strength indicator on the display ( ). The number of bars indicates the signal strength from strong ( ) to weak ( ).• Try moving the phone slightly or moving closer to a window if you are in a building.
94Health and safety informationExposure to radio frequency (RF) signalsYour wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards that were developed by independent scientific organizations through periodic and through evaluation of scientific studies.The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.The exposure standard for wireless phones employs a unit of measurement known as Specific Absorption Rate (SAR). The SAR limit recommended by the FCC is 1.6W/kg.*SAR tests are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output of the phone.Before a new model phone is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement.* In the U.S. and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.E760.book Page 20 Tuesday, May 23, 2006 1:59 PM
Health and safety information 95The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID printed in the label on the phone.For body operationFor body worn operation, this model phone has been tested and meets the FCC RF exposure guidelines when used with a Samsung-supplied or approved accessory designated for this product or when used with and accessory that contains no metal and that positions the handset a minimum from the body.The minimum distance for this model phone is written in the FCC certification information from the body. None compliance with the above conditions may violate FCC RF exposure guidelines.For more Information concerning exposure to radio frequency signals, see the following websites:Federal Communications Commission (FCC)http://www.fcc.govCellular Telecommunications Industry Association (CTIA):http://www.wow-com.comU.S.Food and Drug Administration (FDA)http://www.fda.gov/cdrh/consumerWorld Health Organization (WHO)http://www.who.int/peh-emf/enPrecautions when using batteriesNever use any charger or battery that is damaged in any way.Use the battery only for its intended purpose.If you use the phone near the network’s base station, it uses less power; talk and standby time are greatly affected by the signal strength on the cellular network and the parameters set by the network operator. Battery charging time depends on the remaining battery charge, the type of battery and the charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time E760.book Page 21 Tuesday, May 23, 2006 1:59 PM
96(talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery.If left unused, a fully charged battery will discharge itself over time.Use only Samsung-approved batteries and recharge your battery only with Samsung-approved chargers. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its life.Extreme temperatures will affect the charging capacity of your battery: it may require cooling or warming first.Do not leave the battery in hot or cold places, such as in a car in summer or winter conditions, as you will reduce the capacity and lifetime of the battery. Always try to keep the battery at room temperature. A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Li-ion batteries are particularly affected by temperatures below 0 °C (32 °F).Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object (coin, clip or pen) causes a direct connection between the + and – terminals of the battery (metal strips on the battery), for example when you carry a spare battery in a pocket or bag. Short-circuiting the terminals may damage the battery or the object causing the short-circuiting.Dispose of used batteries in accordance with local regulations. Always recycle. Do not dispose of batteries in a fire.Road safetyYour wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold.When driving a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips:Get to know your wireless phone and its features, such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.When available, use a hands-free device. If possible, add an extra layer of convenience and safety to your wireless E760.book Page 22 Tuesday, May 23, 2006 1:59 PM
Health and safety information 97phone with one of the many hands-free accessories available today.Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voice mail answer it for you.Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous.Do not take notes or look up phone numbers while driving. Jotting down a To Do list or flipping through your Address Book takes your attention away from your primary responsibility, driving safely.Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.Do not engage in stressful or emotional conversations that may be distracting. Make the people with whom you are talking aware that you are driving and suspend conversations that have the potential to divert your attention from the road.Use your wireless phone to call for help. Dial the emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone!Use your wireless phone to help others in emergencies. If you see a car accident, crime in progress or other serious emergency where lives are in danger, call the emergency number, as you would want others to do for you.If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or any other special non-emergency wireless number.Operating environmentRemember to follow any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger.E760.book Page 23 Tuesday, May 23, 2006 1:59 PM
98Health and safety informationWhen connecting the phone or any accessory to another device, read its user’s guide for detailed safety instructions. Do not connect incompatible products.As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder).Electronic devicesMost modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Consult the manufacturer to discuss alternatives.PacemakersPacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research and recommendations of Wireless Technology Research.Persons with pacemakers:should always keep the phone more than 15 cm (6 inches) from their pacemaker when the phone is switched on.should not carry the phone in a breast pocket.should use the ear opposite the pacemaker to minimize potential interference.If you have any reason to suspect that interference is taking place, switch off your phone immediately.Hearing aidsSome digital wireless phones may interfere with some hearing aids. In the event of such interference, you may wish to consult your hearing aid manufacturer to discuss alternatives.Other medical devicesIf you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this E760.book Page 24 Tuesday, May 23, 2006 1:59 PM
Health and safety information 99information. Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.Posted facilitiesSwitch off your phone in any facility where posted notices require you to do so.Potentially explosive environmentsSwitch off your phone when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.Users are advised to switch off the phone while at a refueling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress.Areas with a potentially explosive atmosphere are often but not always clearly marked. They include the areas below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine.Emergency callsThis phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user-programmed functions, which cannot guarantee connection in all conditions. Therefore, you should never rely solely on any wireless phone for essential communications (medical emergencies, for example).E760.book Page 25 Tuesday, May 23, 2006 1:59 PM
100Health and safety informationRemember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers.To make an emergency call:If the phone is not on, switch it on.Key in the emergency number for your present location (for example, 911 or other official emergency number). Emergency numbers vary by location.Press .If certain features are in use (call barring, for example), you may first need to deactivate those features before you can make an emergency call. Consult this document and your local cellular service provider.When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your phone may be the only means of communication at the scene of an accident; do not end the call until given permission to do so.FCC Notice and CautionsFCC Notice• The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will occur in a particular installation. E760.book Page 26 Tuesday, May 23, 2006 1:59 PM
Health and safety information 101The phone may cause TV or radio interference if used in close proximity to receiving equipment. The FCC can require you to stop using the phone if such interference cannot be eliminated.Vehicles using liquefied petroleum gas (such as propane or butane) must comply with the National Fire Protection Standard (NFPA-58). For a copy of this standard, contact the National Fire Protection Association, One Battery march Park, Quincy, MA 02269, Attn: Publication Sales Division.CautionsChanges or modifications made in the radio phone, not expressly approved by Samsung, will void the user’s authority to operate the equipment.Only use approved batteries, antennas and chargers. The use of any unauthorized accessories may be dangerous and void the phone warranty if said accessories cause damage or a defect to the phone.Although your phone is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting, bending or sitting on it.Other important safety informationOnly qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device.Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the phone, its parts or accessories.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiveing antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.E760.book Page 27 Tuesday, May 23, 2006 1:59 PM
102Health and safety informationFor vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If wireless equipment is improperly installed and the air bag inflates, serious injury could result.Switch off your phone before boarding an aircraft. The use of wireless phones in aircraft is illegal and may be dangerous to the aircraft’s operation.Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both.Care and maintenanceYour phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfill any warranty obligations and allow you to enjoy this product for many years:Keep the phone and all its parts and accessories out of the reach of small children’s.Keep the phone dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits.Do not use the phone with a wet hand. Doing so may cause an electric shock to you or damage to the phone.Do not use or store the phone in dusty, dirty areas, as its moving parts may be damaged.Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside the phone, which may damage the phone’s electronic circuit boards.Do not drop, knock or shake the phone. Rough handling can break internal circuit boards.Do not use harsh chemicals, cleaning solvents or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water solution.Do not paint the phone. Paint can clog the device’s moving parts and prevent proper operation.E760.book Page 28 Tuesday, May 23, 2006 1:59 PM
Health and safety information 103Do not put the phone in or on heating devices, such as a microwave oven, a stove or a radiator. The phone may explode when overheated.Use only the supplied or an approved replacement antenna. Unauthorized antennas or modified accessories may damage the phone and violate regulations governing radio devices.If the phone, battery, charger or any accessory is not working properly, take it to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service.Acknowledging special precautions and the FCC and industry canada noticeCautionsModifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.FCC Compliance informationThis device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:This device may not cause harmful interference, andThis device must accept any interference received.Including interference that may cause undesired operation.Information to userThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.E760.book Page 29 Tuesday, May 23, 2006 1:59 PM
104Health and safety informationThis equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/ TV technician for help.Appendix A: CERTIFICATIONINFORMATION (SAR)THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on safety standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR limit set by the FCC is 1.6 W/kg. SAR Tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone E760.book Page 30 Tuesday, May 23, 2006 1:59 PM
Health and safety information 105while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.Before a new model phone is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC. Tests for each model phone are performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC. The highest SAR values for this model phone as reported to the FCC are Head: 0.774 W/Kg, Body-worn: 0.542 W/Kg.For body worn operation, this model phone has been tested and meets the FCC RF exposure guidelines whenused with a Samsung accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 1.5 cm from the body. Non-compliance with the above restrictions may result in violation of FCC RF exposure guidelines.The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID A3LGHS501I.In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The standard incorporates a substantial ma gin of safety to give additional protection for the public and to account for any variations in measurements.E760.book Page 31 Tuesday, May 23, 2006 1:59 PM
106Health and safety informationAppendix B: Guide to safe andresponsible wireless phone useCellular Telecommunications & Internet Association “Safety is the most important call you will ever make.”A guide to safe and responsible wireless phone useTENS OF MILLIONS OF PEOPLE IN THE U.S. TODAY TAKE ADVANTAGE OF THE UNIQUE COMBINATION OF CONVENIENCE, SAFETY AND VALUE DELIVERED BY THE WIRELESS TELEPHONE. QUITE SIMPLY, THE WIRELESS PHONE GIVES PEOPLE THE POWERFUL ABILITY TO COMMUNICATE BY VOICE-ALMOST ANYWHERE, ANYTIME-WITH THE BOSS, WITH A CLIENT, WITH THE KIDS, WITH EMERGENCY PERSONNEL OR EVEN WITH THE POLICE. EACH YEAR, AMERICANS MAKE BILLIONS OF CALLS FROM THEIR WIRELESS PHONES, AND THE NUMBERS ARE RAPIDLY GROWING.But an important responsibility accompanies those benefits, one that every wireless phone user must uphold. When driving a car, driving is your first responsibility. A wireless phone can be an invaluable tool, but good judgment must be exercised at all times while driving a motor vehicle whether on the phone or not.The basic lessons are ones we all learned as teenagers. Driving requires alertness, caution and courtesy. It requires a heavy dose of basic common sense-keep your head up, keep your eyes on the road, check your mirrors frequently and watch out for other drivers. It requires obeying all traffic signs and signals and staying within the speed limit. It means using seat belts and requiring other passengers to do the same. But with wireless phone use, driving safely means a little more. This brochure is a call to wireless phone users everywhere to make safety their first priority when behind the wheel of a car. Wireless telecommunications is keeping us in touch, simplifying our lives, protecting us in emergencies and providing opportunities to help others in need. When it comes to the use of wireless phones, safety is your most important call.E760.book Page 32 Tuesday, May 23, 2006 1:59 PM
Health and safety information 107Wireless phone “Safety Tips”Below are safety tips to follow while driving and using a wireless phone which should be easy to remember:Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road.When available, use a hands free device. A number of hands free wireless phone accessories are readily available today. Whether you choose an installed mounted device for your wireless phone or a speaker phone accessory, take advantage of these devices if available to you.Position your wireless phone within easy reach. Make sure you place your wireless phone within easy reach and where you can grab it without removing your eyes from the road. If you get an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay attention to the road.Do not take notes or look up phone numbers while driving. If you are reading an address book or business card, or writing a “to do” list while driving a car, you are not watching where you are going. It’s common sense. Don’t get caught in a dangerous situation because you are reading or writing and not paying attention to the road or nearby vehicles.Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan your calls before you begin your trip or attempt to coincide your calls with times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip-dial only a few numbers, check the road and your mirrors, then continue.Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and driving do not mix-they are distracting and even dangerous when you are behind the wheel of a car. Make E760.book Page 33 Tuesday, May 23, 2006 1:59 PM
108Health and safety informationpeople you are talking with aware you are driving and if necessary, suspend conversations which have the potential to divert your attention from the road.Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself and your family in dangerous situations-with your phone at your side, help is only three numbers away. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident, road hazard or medical emergency. Remember, it is a free call on your wireless phone!Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a “Good Samaritan” in your community. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.Call roadside assistance or a special wireless non emergency assistance number when necessary. Certain situations you encounter while driving may require attention, but are not urgent enough to merit a call for emergency services. But you still can use your wireless phone to lend a hand. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of their responsibilities as safe drivers and good citizens. As we approach a new century, more and more of us will take advantage of the benefits of wireless telephones. And, as we take to the roads, we all have a responsibility to drive safely.“The wireless industry reminds you to use your phone safely when driving.”Cellular Telecommunications & Internet Association For more information, please call 1-888-901-SAFE. For updates: http://www.wow-com.com/consumer/issues/driving/articles.cfm?ID =85E760.book Page 34 Tuesday, May 23, 2006 1:59 PM
Health and safety information 109Appendix C: consumer updateon wireless phonesU.S. Food and Drug AdministrationWhat kinds of phones are the subject of this update?The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called cell, mobile, or PCS phones. These types of wireless phones can expose the user to measurable radio frequency energy (RF) because of the short distance between the phone and the user s head. These RF exposures are limited by Federal Communications Commission safety guidelines that were developed with the advice of FDA and other federal health and safety agencies. When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a person’s RF exposure decreases rapidly with increasing distance from the source. The so-called “cordless phones,” which have a base unit connected to the telephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures well within the FCC’s compliance limits.Do wireless phones pose a health hazard?The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radio frequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.What is FDA’s role concerning the safety of wireless phones?Under the law, FDA does not review the safety of radiation emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radio frequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and E760.book Page 35 Tuesday, May 23, 2006 1:59 PM
110Health and safety informationto repair, replace or recall the phones so that the hazard no longer exists.Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:Support needed research into possible biological effects of RF of the type emitted by wireless phones;Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; andCooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human healthFDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:National Institute for Occupational Safety and HealthEnvironmental Protection Agency Federal Communications CommissionOccupational Safety and Health AdministrationNational Telecommunications and Information AdministrationThe National Institutes of Health participates in some interagency working group activities, as well.FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones.FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the primary subject of the safety questions discussed in this document.What is FDA doing to find out more about the possible health effects of wireless phone RF?E760.book Page 36 Tuesday, May 23, 2006 1:59 PM
Health and safety information 111FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radio frequency energy (RF).FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues.FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world.What steps can I take to reduce my exposure to radio frequency energy from my wireless phone?If there is a risk from these products—and at this point we do not know that there is—it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radio frequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure.If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antennaAgain, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like E760.book Page 37 Tuesday, May 23, 2006 1:59 PM
112Health and safety informationthose described above to reduce your RF exposure from wireless phone use.What about children using wireless phones?The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radio frequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure.Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists.Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort. These systems reduce the absorption of RF energy in the head because the phone, which is the source of the RF emissions, will not be placed against the head. On the other hand, if the phone is mounted against the waist or other part of the body during use, then that part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements regardless of whether they are used against the head or against the body. Either configuration should result in compliance with the safety limit.Do wireless phone accessories that claim to shield the head from RF radiation work?Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone. Studies have shown that these products generally do not work as advertised. Unlike E760.book Page 38 Tuesday, May 23, 2006 1:59 PM
Health and safety information 113“hand-free” kits, these so-called “shields” may interfere with proper operation of the phone. The phone may be forced to boost its power to compensate, leading to an increase in RF absorption. In February 2002, the Federal trade Commission (FTC) charged two companies that sold devices that claimed to protect wireless phone users from radiation with making false and unsubstantiated claims. According to FTC, these defendants lacked a reasonable basis to substantiate their claim.What about wireless phone interference with medical equipment?Radio frequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI.FDA has tested hearing aids for interference from handheld wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a compatible phone and a compatible hearing aid at the same time. This standard was approved by the IEEE in 2000.FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the problem.What are the results of the research done already?The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of radio frequency energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that E760.book Page 39 Tuesday, May 23, 2006 1:59 PM
114Health and safety informationshowed increased tumor development used animals that had been genetically engineered or treated with cancer causing chemicals so as to be pre-disposed to develop cancer in the absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we don t know with certainty what the results of such studies mean for human health.Three large epidemiology studies have been published since December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, gioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phone RF exposures. However, none of the studies can answer questions about long-term exposures, since the average period of phone use in these studies was around three years.What research is needed to decide whether RF exposure from wireless phones poses a health risk?A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but 10 or more years follow-up may be needed to provide answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop - if they do - may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this measurement, such as the angle at which the phone is held, or which model of phone is used.Which other federal agencies have responsibilities related to potential RF health effects?Additional information on the safety of RF exposures from various sources can be obtained from the following organizations.E760.book Page 40 Tuesday, May 23, 2006 1:59 PM
Health and safety information 115FCC RF Safety Program:http://www.fcc.gov/oet/rfsafety/Environmental Protection Agency (EPA):http://www.epa.gov/radiation/Occupational Safety and Health Administration’s (OSHA):http://www.osha-slc.gov/SLTC/radiofrequencyradiation/index.htmlNational Institute for Occupational Safety and Health (NIOSH):http://www.cdc.gov/niosh/emfpg.htmlWorld health Organization (WHO):http://www.who.int/peh-emf/International Commission on Non-Ionizing Radiation Protection:http://www.icnirp.deNational Radiation Protection Board (UK):http://www.nrpb.org.ukUpdated 4/3/2002: US Food and Drug Administration http://www.fda.gov/cellphonesSTANDARD LIMITED WARRANTYWhat is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS AMERICA, L.P. (SAMSUNG) warrants to the original purchaser ("Purchaser") that SAMSUNG’s Phones and accessories ("Products") are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase and continuing for the following specified period of time after that date:Phone 1 YearBatteries 1 YearLeather Case/Pouch 90 Days Other Phone Accessories 1 YearWhat is Not Covered? This Limited Warranty is conditioned upon proper use of Product by Purchaser. This Limited Warranty does not cover: (a) defects or damage resulting from accident, misuse, abuse, neglect, unusual physical, electrical or electromechanical stress, or modification of any part of Product, including antenna, or cosmetic damage; (b) equipment that has the serial number removed or made illegible; (c) any plastic surfaces or other E760.book Page 41 Tuesday, May 23, 2006 1:59 PM
116Health and safety informationexternally exposed parts that are scratched or damaged due to normal use; (d) malfunctions resulting from the use of Product in conjunction with accessories, products, or ancillary/peripheral equipment not furnished or approved by SAMSUNG; (e) defects or damage from improper testing, operation, maintenance, installation, or adjustment; (f) installation, maintenance, and service of Product, or (g) Product used or purchased outside the United States or Canada. This Limited Warranty covers batteries only if battery capacity falls below 80% of rated capacity or the battery leaks, and this Limited Warranty does not cover any battery if (i) the battery has been charged by a battery charger not specified or approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery are broken or show evidence of tampering, or (iii) the battery has been used in equipment other than the SAMSUNG phone for which it is specified. What are SAMSUNG’s Obligations? During the applicable warranty period, SAMSUNG will repair or replace, at SAMSUNG’s sole option, without charge to Purchaser, any defective component part of Product. To obtain service under this Limited Warranty, Purchaser must return Product to an authorized phone service facility in an adequate container for shipping, accompanied by Purchaser’s sales receipt or comparable substitute proof of sale showing the date of purchase, the serial number of Product and the sellers’ name and address. To obtain assistance on where to deliver the Product, call Samsung Customer Care at 1-888-987-4357. Upon receipt, SAMSUNG will promptly repair or replace the defective Product. SAMSUNG may, at SAMSUNG’s sole option, use rebuilt, reconditioned, or new parts or components when repairing any Product or replace Product with a rebuilt, reconditioned or new Product. Repaired/replaced leather cases and pouches will be warranted for a period of ninety (90) days. All other repaired/replaced Product will be warranted for a period equal to the remainder of the original Limited Warranty on the original Product or for 90 days, whichever is longer. All replaced parts, components, boards and equipment shall become the property of SAMSUNG. If SAMSUNG determines that any Product is not covered by this Limited Warranty, Purchaser must pay E760.book Page 42 Tuesday, May 23, 2006 1:59 PM
Health and safety information 117all parts, shipping, and labor charges for the repair or return of such Product. What Are the Limits On SAMSUNG’s Liability? EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE PRODUCT “AS IS,” AND SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO:THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE;WARRANTIES OF TITLE OR NON-INFRINGEMENT;DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; ORCOMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS OR E760.book Page 43 Tuesday, May 23, 2006 1:59 PM
118Health and safety informationEMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER’S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.This Limited Warranty allocates risk of Product failure between Purchaser and SAMSUNG, and SAMSUNG’s Product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty. The agents, employees, distributors, and dealers of SAMSUNG are not authorized to make modifications to this Limited Warranty, or make E760.book Page 44 Tuesday, May 23, 2006 1:59 PM
Health and safety information 119additional warranties binding on SAMSUNG. Accordingly, additional statements such as dealer advertising or presentation, whether oral or written, do not constitute warranties by SAMSUNG and should not be relied upon.Samsung Telecommunications America (STA), Inc.1301 East Lookout DriveRichardson, TX 75082Phone: 1-800-SAMSUNGPhone: 1-888-987-HELP (4357) ©2005 Samsung Telecommunications America. All rights reserved.No reproduction in whole or in part allowed without prior written approval.Specifications and availability subject to change without notice. [080802]E760.book Page 45 Tuesday, May 23, 2006 1:59 PM

Navigation menu