Samsung Electronics Co SGHS501I Single-Band PCS GSM/ EDGE Phone with Bluetooth User Manual

Samsung Electronics Co Ltd Single-Band PCS GSM/ EDGE Phone with Bluetooth

Users Manual

Download: Samsung Electronics Co SGHS501I Single-Band PCS GSM/ EDGE Phone with Bluetooth User Manual
Mirror Download [FCC.gov]Samsung Electronics Co SGHS501I Single-Band PCS GSM/ EDGE Phone with Bluetooth User Manual
Document ID669869
Application IDBMSrjPQExNNweSJL2fILOg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize222.73kB (2784143 bits)
Date Submitted2006-06-16 00:00:00
Date Available2006-07-31 00:00:00
Creation Date2006-06-14 14:12:06
Producing SoftwareAcrobat Distiller 6.0.1 (Windows)
Document Lastmod2006-06-14 14:12:11
Document Titleuntitled

* Depending on the software installed or your service provider or country,
some of the descriptions in this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear
different from the illustrations in this guide.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-xxxxxA
English(EU). 05/2006. Rev. 1.0
01
ft_
Dra 05. 1
6.
n:
200 ersio 3)
(V AGFD
S50
SGH-S501i
User’s Guide
Drive safely at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Use only Samsung-approved batteries and
accessories, such as headsets and PC data cables. Use
of any unauthorised accessories could damage you or
your phone may be dangerous.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
• The phone could explode if the battery is replaced with an
incorrect type.
• Dispose of used batteries according to the manufacturer’s
instructions.
At very high volumes, prolonged listening to a
headset can damage your hearing.
Emergency calls
Qualified service
Key in the emergency number for your present
location, then press
Only qualified service personnel may repair your
phone.
Keep your phone away from small children
For more detailed safety information, see "Health and
safety information" on page 93.
Keep the phone and all its parts, including accessories,
out of the reach of small children.
Important safety precautions
Be aware of special regulations
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful attention
to the subsequent information regarding safety
or phone features.
Indicates that you can get more information on
the referenced page.
→
Indicates that you need to press the Navigation
keys to scroll to the specified option and then
select it.
< >
Indicates a key on the phone. For example,
[ ]
Indicates a soft key, whose function is displayed
on the phone screen. For example,  or [Centre] to
confirm the function displayed
or option highlighted.
4. To exit, choose either of the
following methods.
• Press  or [C] to
move up one level.
• Press [ ] to return to Idle
mode.
Use shortcuts
12
Press the number key
corresponding to the option you
want.
Customise your phone
Display
language
1. In Idle mode, press [Centre]
and select Settings → Phone
settings → Language.
2. Select a language.
Idle mode
wallpaper
You can set wallpaper for the idle
screen on the main display.
1. In Idle mode, press [Centre]
and select Settings → Display
settings → Wallpaper → Main
display.
2. Select an image or a video
category.
3. Select an image or a video.
4. Press .
4. Press  to return to the
Music player screen.
Play music files 1. From the music player screen,
press [Centre].
2. During playback, use the
following keys:
• Centre: pauses or resumes
playback.
• Left: moves back to the
previous file.
• Right: skips to the next file.
• Up: opens the play list.
•
/ : adjusts the volume.
• Down: stops playback.
Browse the web
Use Phonebook
In Idle mode, press and hold
Launch the
i-mode browser [Centre].
Add a contact
To the phone’s memory:
1. In Idle mode, enter a phone
number and press .
Step outside the phone
Using the i-mode browser, you can easily access the
wireless web to get a variety of up-to-date services
and information and to enjoy downloads of web
content.
2. Select Save contact → Phone
→ New → a number type.
•
Navigate the
i-mode browser
•
To scroll through browser items,
press [Up] or [Down].
3. Specify contact information:
First name, Last name, Mobile,
Home, Office, Fax, Other, Email,
Caller ID, Ringtone, Group, and
Note.
To select an item, press
[Centre].
4. Press  to save the
contact.
•
To return to the previous page,
press .
To the SIM card:
•
To move to the next page, press
 and select Go →
Forward.
•
To access browser options,
press .
1. In Idle mode, enter a phone
number and press .
2. Select Save contact → SIM →
New.
3. Enter a name and press
 to save the contact.
17
Step outside the phone
Find a contact
1. In Idle mode, press [Centre]
and select Phonebook →
Contact list.
2. Select a contact.
3. Scroll to a number and press
] to dial, or press [Centre]
to edit contact information.
Create and
send a name
card
1. In Idle mode, press [Centre]
and select Phonebook → My
name card.
2. Specify your contact
information.
3. Press  to save the
name card.
4. To send the name card, press
 and select Send
via → a sending method.
18
Send messages
1. In Idle mode, press [Centre]
Send a text
and select Messages → Create
message (SMS)
message.
2. Enter your message.
3. Press  and select
Save and send or Send only.
4. Enter destination numbers.
5. Press [Centre] to send the
message.
Send an i-MMS 1. In Idle mode, press 
and select Compose iMMS.
message
2. Press [Centre].
(MMS)
3. Enter destination numbers or
e-mail addresses and press
[Centre].
4. Press [Down] and then
[Centre].
6. Press [Down] to move to the
attachment line.
6. Select SMIL → Media and add
text, images, sounds, and
videos.
7. Press  and select
Attach File Menu.
7. On the slide preview screen,
press  and select
Send to send the message.
Send an i-mail
1. In Idle mode, press 
and select Compose iMail.
2. Press [Centre].
3. Enter destination numbers or
e-mail addresses and press
[Centre].
4. Press [Down] and then
[Centre].
5. Enter the mail title and press
[Centre].
Step outside the phone
5. Enter the message title and
press [Centre].
8. Select the attachment field and
use the following options for
adding files:
• Attach File: add images,
sounds, videos, music files,
name cards, or schedule
items.
• Attach Melody: add MFi
(Melody Format for i-mode)
melody files.
• Attach Bookmark: add
bookmarks.
9. Press [Down] and then
[Centre].
10. Enter the mail text and press
[Centre].
11. Select Send to send the mail.
19
Step outside the phone
View messages
View a text
message
When a notification appears:
1. Press .
2. Select the message from the
Inbox.
From the Inbox:
1. In Idle mode, press [Centre]
and select Messages → My
messages → Inbox.
Use Bluetooth
Your phone is equipped with Bluetooth technology
which enables you to connect the phone wirelessly to
other Bluetooth devices and exchange data with them,
talk hands-free, or control the phone remotely.
Turn on
Bluetooth
2. Select My phone’s visibility →
On to allow other devices to
find your phone.
2. Select a message.
View an i-mail
or i-MMS
message
From the Inbox:
1. In Idle mode, press 
and select Inbox → an Inbox
folder.
2. Select a message.
20
1. In Idle mode, press [Centre]
and select Settings →
Bluetooth → Activation → On.
Search for and
pair with a
Bluetooth
device
1. In Idle mode, press [Centre]
and select Settings →
Bluetooth → My devices →
Search for new devices.
2. Select a device.
Send data
1. Access an application, such as
Phonebook, My files, or
Calendar.
2. Scroll to an item.
Receive data
To receive data via Bluetooth, your
phone’s Bluetooth feature must be
active.
Step outside the phone
3. Enter a Bluetooth PIN or the
other device’s Bluetooth PIN, if
it has one, and press .
When the owner of the other
device enters the same code,
pairing is complete.
1. When a device attempts to
access your phone, press
 to permit the
connection.
2. If necessary, press  to
confirm that you are willing to
receive.
3. Press  and select
Send via → Bluetooth →
Search for new devices.
4. Select a device.
5. If necessary, enter the
Bluetooth PIN and press .
21
Step outside the phone
Use a memory card
• Do not expose cards in a place
subject to electro-static
discharge and/or electrical
noise.
You can use an optional microSD memory card to
increase your phone’s memory capacity.
Important
memory card
information
• Frequent erasing and writing will
shorten a card’s lifespan.
• Do not remove a card from the
phone or turn off the phone
while data is being accessed or
transferred. This could result in
loss of data and/or damage to
the card or phone.
• Keep cards away from small
children or pets.
Insert a
memory card
1. Slide a memory card into the
card slot, with the label side
face up.
• Do not subject cards to strong
shocks.
• Do not touch card terminals with
your fingers or metal objects. If
dirty, wipe the card with a soft
cloth.
22
2. Press the card until it locks into
place.
Use a card
adapter
1. Insert a memory card into a
card adapter, and then the
adapter into a card reader/
writer.
Watch the phone display on a TV
You can view the display of your phone on a TV screen
by connecting the phone and TV with a TV out cable.
This enables you to enjoy the photos, videos and
music stored in the phone’s memory with your family
or friends on a larger screen.
Important TV
information
•
•
2. Plug the USB connecter of the
card reader/writer into the USB
port on your computer.
Step outside the phone
Using a card adapter and a USB
card reader/writer, you can read
the card on a computer.
Depending on your particular
TV model, the location and
shape of the video input and
audio output ports may vary.
Match cable connector and TV
port colours.
Depending on the video
system, the image may vibrate
or in some other way be less
than optimal.
3. Access the appropriate memory
disk and copy to and from the
card.
23
Step outside the phone
Important TV
information
(continued)
•
•
Depending on the video quality,
some video clips may not
display.
You cannot use a Bluetooth
stereo headset or the zooming
feature in TV Out mode.
Transfer phone 1. With the TV switched on,
connect your phone to the TV
display to a TV
with a TV out cable, as shown.
2. Switch the TV to External Input
mode.
The display switches to TV Out
mode and you can view the
phone’s display on the TV
screen.
3. If necessary, set the video
system for your TV in the
TV-out settings menu.
p. 81
4. Access the application you want
and open files.
24
Enter text
AB, T9, Number, and Symbol modes
You can enter text for some features, such as
Messages, Contacts, or Calendar, using AB mode, T9
mode, Number mode, and Symbol mode.
Using AB mode
Press the appropriate key until the character you want
appears on the display.
Key
Characters in order displayed
Upper case
Lower case
Changing the text input mode
•
•
•
Press and hold [ ] to switch between T9 mode
) and AB mode (
). Depending on your
country, you may also be able to access an input
mode for your specific language.
Press [ ] to change case or switch to Number
mode (
).
Press and hold [ ] to switch to Symbol mode.
(Creating an SMS message with GSM-Alphabet encoding)
25
Enter text
Other AB mode operations
•
•
•
•
To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
Press [ ] to insert a space.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Using T9 mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
Entering a word in T9 mode
1. Press [2] to [9] to start entering a word. Press
each key once for each letter.
For example, press [4], [3], [5], [5], and [6] to
enter Hello in T9 mode.
T9 predicts the word that you are typing, and it
may change with each key that you press.
26
2. Enter the whole word before editing or deleting
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [0] to display alternative word
choices for the keys that you have pressed.
For example, Of and Me use [6] and [3].
4. Press [ ] to insert a space and enter the next
word.
Other T9 mode operations
•
•
•
•
Press [1] to enter periods or apostrophes
automatically. To access more symbols, press and
hold [ ].
Press [ ] to insert a space.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Adding a new word to the T9 dictionary
This feature may not be available for some languages.
1. Enter the word that you want to add.
2. Press [0] to display alternative words for your key
presses. When there are no more alternative
words, Add appears on the bottom line.
3. Press .
4. Enter the word you want using AB mode and press
.
Using Number mode
Number mode enables you to enter numbers.
Press the keys corresponding to the digits you want.
Using Symbol mode
Symbol mode enables you to insert symbols.
To
Press
display more symbols
[Up] or [Down].
select a symbol
the corresponding
number key.
clear the entered symbols
[C].
insert the symbols
.
Call functions
Advanced calling features
Making a call
1. In Idle mode, enter the area code and phone
number.
• Press [C] to clear the last digit or press and
hold [C] to clear the whole display. You can
move the cursor to edit an incorrect digit.
• Press and hold [ ] to enter a pause between
numbers.
2. Press [ ].
3. When you want to end the call, press [
].
Making an international call
1. In Idle mode, press and hold [0]. The + character
appears.
2. Enter the country code, area code, and phone
number, then press [ ].
27
Call functions
Redialling recent numbers
Answering a call
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press [ ].
When you receive an incoming call, the phone rings
and displays the incoming call image.
Making a call from Phonebook
Once you have stored a number in Phonebook, you
can dial the number by selecting it from
Phonebook.p. 33
You can also use the speed dial feature to assign your
most frequently dialled numbers to specific number
keys.p. 35
You can quickly dial a number from the SIM card using
its location number assigned when stored.
1. In Idle mode, enter a location number and press
[ ].
2. Press [Left] or [Right] to scroll through other
numbers.
3. Press  or [ ] to dial the number you want.
28
Press  or [
] to answer the call.
Tips for answering a call
•
•
•
•
When Anykey answer is active, you can press
any key, except for [ ] and .p. 80
When Active flip is active, you can simply open
the phone.p. 80
Press [ ] or  to reject a call.
Press and hold [ / ] to reject a call or mute the
ringer, depending on the Volume key setting.
p. 80
Viewing missed calls
If you have missed calls, the screen displays how
many calls you have missed.
1. Press .
2. If necessary, scroll through the missed calls.
3. Press [
] to dial the number you want.
Placing a call on hold/Retrieving
Press  or  to place a call on hold
or retrieve the call.
Use the headset to make or answer calls without
holding the phone.
Making a second call
Connect the headset to the jack on the left side of the
phone. The button on the headset works as follows:
To
Press
redial the last call
and hold the button twice.
answer a call
the button.
end a call
the button.
Options during a call
You can access a number of functions during a call.
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume during a call.
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
Call functions
Using the headset
You can make another call if your network supports it.
1. Press  to put the call on hold.
2. Make the second call in the normal way.
3. Press  to switch between the calls.
4. Press  and select End held call to end
the call on hold.
5. To end the current call, press [ ].
Answering a second call
You can answer an incoming call while already on the
phone, if your network supports it and you have
activated the call waiting feature.p. 84
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press  to switch between the calls.
29
Call functions
3. Press  and select End held call to end
the call on hold.
4. To end the current call, press [ ].
Using the speakerphone feature
•
•
Use the phone as a speakerphone to talk and listen
with the phone a short distance away.
Press [Centre] and then  to activate the
speakerphone feature. Press [Centre] again to switch
back to the earpiece.
To communicate with answering machines or
computerised telephone systems, Send keys
must be selected.
•
Using In-call options
Press  to access the following options
during a call:
• Speaker on/Normal: turn on the speakerphone
feature or switch back to Normal mode.
• Switch to headset/Switch to phone: switch the
call to a Bluetooth headset or hands-free car kit or
back to the phone.
• Menu: access the phone's menu functions.
30
Mute/Unmute: switch off the phone's microphone
so that the other person on the phone cannot hear
you, or switch it back on.
Mute keys/Send keys: switch the key tones on
or off.
•
•
Send DTMF: send the DTMF (Dual tone multifrequency) tones as a group. The DTMF tones are
the tones used in phones for tone dialling,
sounding when you press the number keys. This
option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
Contacts: access the contact list.
End held call: disconnect the call currently on
hold.
•
•
•
Transfer: transfer the currently active call to a
caller on hold. The two callers can talk to each
other, but you are disconnected from the call.
Join: set up a multi-party call by adding a caller
on hold to a currently active call. You can include
up to 5 people on a multi-party call.
Select one: select one of multi-party call
participants. You can then use the following
options:
Private: have a private conversation with one
multi-party call participant. The other participants
can converse with each other. After the private
conversation, select Join to return to the
multi-party call.
Remove: disconnect one multi-party call
participant.
Menu functions
All menu options listed
Call log (Menu 1)
Use this menu to view the calls you have dialled,
received, or missed, and the length of the calls. You
can also check the cost of your calls, if your SIM card
supports this function.
To access this menu, press [Centre] in Idle mode and
select Call log.
Recent contacts (Menu 1.1)
This menu displays the most recent calls dialled,
received, or missed.
Accessing a call log
1. Press [Left] or [Right] to move to another call
type.
2. Press [Up] or [Down] to scroll through the call list.
3. Press [Centre] to view the details of a call, or press
[ ] to dial a number.
31
Menu functions
Using call log options
Delete all (Menu 1.5)
While viewing call details, press  to access
the following options:
• Call: edit the number.
• Add to Phonebook: save the number to
Contacts.
• Send: send an SMS, i-mail, or i-MMS message to
the selected number.
• Delete: delete the selected call log or all logs.
Use this menu to delete all of the records in each call
type.
1. Press [Centre] to select the call types to be
cleared.
2. Press .
3. Press  to confirm the deletion.
Missed calls (Menu 1.2)
This menu displays the most recent calls you did not
answer.
Dialled calls (Menu 1.3)
This menu displays the most recent calls you have
dialled.
Received calls (Menu 1.4)
This menu displays the most recent calls you have
received.
32
Call time (Menu 1.6)
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
• Last call time: check the length of your last call.
• Total dialled calls: check the total length of all
the calls you have dialled.
• Total received calls: check the total length of all
the calls you have received.
To reset the call timers, press . You need to
enter the phone password.
The password is preset to 00000000. You can
change this password.p. 89
Call costs (Menu 1.7)
Phonebook
This network feature displays the cost of calls. This
menu is available only if supported by your SIM card.
Note that this is not intended to be used for billing
purposes.
• Last call cost: check the cost of your last call.
• Total cost: check the total cost of all of your calls.
If the total cost exceeds the maximum cost set in
Set max. cost, you must reset the counter before
you can make another call.
• Max. cost: check the maximum cost limit set in
Set max. cost.
• Reset counters: reset the cost counters.
• Set max. cost: set the maximum cost authorised
for your calls.
• Price/Unit: set the price per unit that is applied
when the cost of your calls is calculated.
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Phonebook.
(Menu 2)
Menu functions
To access this menu, press [Centre] in Idle mode and
select Phonebook.
Contact list (Menu 2.1)
Phonebook (Menu 2)
Use this menu to search for numbers in Phonebook.
Finding a contact
1. Enter the first few letters of the name that you
want to find.
2. Select a contact from the list.
3. Scroll to a number and press [ ] to dial, or press
[Centre] to edit contact information.
Using Phonebook options
While viewing contact details, press  to
access the following options:
• Edit: edit contact information.
33
Menu functions
•
•
•
•
Send message: send an SMS, i-mail, or i-MMS
message to the selected number, or to the selected
e-mail address.
Copy to: copy the selected number to the phone’s
memory or to the SIM card.
Send via: send the contact via SMS, i-mail,
i-MMS, or Bluetooth.
Delete: delete the selected contact.
Create contact (Menu 2.2)
Use this menu to add a new contact to Phonebook.
Storing a contact in the phone’s memory
1. Select Phone.
2. Change the settings or enter information about the
contact.
• First name/Last name: assign a name.
• Mobile/Home/Office/Fax/Other: add a
number in any type.
• Email: assign an e-mail address.
• Caller ID: assign an image or video to alert
you to a call from the person.
34
•
Ringtone: assign a ringtone to alert you to a
call from the person.
• Group: assign the contact to a caller group.
• Note: add a memo about the person.
3. Press  to save the contact.
Storing a contact on the SIM card
1. Select SIM.
2. Enter information about the contact.
• Name: assign a name.
• Phone number: add a number.
• Location: assign a location number.
To assign a caller ID image or video, ringtone, or
group, the contact must be saved to the phone’s
memory.
3. Press  to save the contact.
Group (Menu 2.3)
Use this menu to organise your contacts in caller
groups.
Creating a new caller group
•
1.
2.
3.
4.
5.
Speed dial (Menu 2.4)
Delete: delete the selected group or all groups.
Group members, however, will not be deleted from
Contacts.
Use this menu to assign a speed dial number (2 to 9)
for 8 of your most frequently dialled numbers.
Assigning speed dial numbers
1.
2.
3.
4.
1. Select a key location from 2 to 9. Key 1 is reserved
for your voicemail server.
2. Select a contact from the contact list.
3. Select a number, if the contact has more than one
number.
Managing caller groups
While viewing the group list, press  to
access the following options:
• View: display the members of the selected group.
• Add: add a new group.
• Edit: change the group properties.
• Send message: send an SMS, i-mail, or i-MMS to
the group members you want.
Phonebook (Menu 2)
Adding members to a caller group
Select a group.
Press .
Press [Centre] to select the contacts to be added.
Press .
3. Press  to return to the music player
screen.
Key
Turns 3D sound on or off.
Playing music files
Changes the playback animation.
Changes the repeat mode.
Changes the equaliser mode.
Changes the skin type.
Turns Shuffle mode on or off.
1. From the music player screen, press 
and select Play via.
2. Select Phone to use the phone speaker.
Select Bluetooth stereo headset to use a
Bluetooth stereo headset and then search for and
connect the phone to the headset.
During playback, use the following keys:
38
Key
Function
Centre
Pauses or resumes playback.
Left
Returns to the previous file.
Right
Skips to the next file.
Up
Opens the current play list.
Down
Stops playback.
Function
Adjusts the volume level.
Using music player options
During playback, press  to access the
following options:
• Play/Pause: begin or pause playback.
• Transfer to Bluetooth stereo headset/
Transfer to phone: switch the sound output to a
Bluetooth stereo headset or the phone speaker.
• Open: access the play list of the current album or
album list.
•
•
•
•
Go to album list: access the album list.
Move to: move the selected file to another play
list.
Copy to: copy the selected file to another play list.
Move track in playlist: move the selected file to
the position you want within the play list.
Remove: remove the selected file or all files from
the play list.
Details: access the file properties.
•
•
•
•
Press and hold [
] to launch the music player. Use
the following keys to control the music player:
Function
Begins or pauses playback.
Accessing the play list
Returns to the previous file.
From the music player screen, press [Up].
Skips to the next file.
Press  to access the following options:
• Play: play the currently selected file.
• Add music from: add files to the play list.
Applications (Menu 3)
Playing music files with the phone closed
Key
Menu functions
•
Remove from playlist: remove the selected file
from the play list.
Settings: change the default settings for playing
music files.
Repeat mode: select a repeat mode.
Shuffle: set the music player to play music at
random.
Music overrides other sounds: set the music
player to continue playback even if you exit it.
Equaliser: select an equaliser setting.
3D sound: turn 3D sound on or off.
Visualisation: change the playback animation.
Skin: select a skin type.
Volume: select a volume level.
Details: access the file properties.
Adjusts the volume.
39
Menu functions
Voice recorder (Menu 3.2)
Key
Use this menu to record voice memos. A voice memo
can be up to one hour long.
Left
Moves backward in a memo.
Right
Moves forward in a memo.
Recording a voice memo
1. Press [Centre] to start recording.
2. Speak into the microphone.
Press [Centre] to pause or resume recording.
3. Press  or [Down] to end recording. The
voice memo is saved automatically.
4. Press [Centre] to review the voice memo, or [Up]
to record a new voice memo.
Down
Adjusts the volume.
Stops playback.
Changing the recording mode
1. From the Voice recorder screen, press 
and select Go to My voice clips.
2. Select a voice memo.
You can change the recording mode of the voice
recorder. The maximum recording time is determined
by this setting. Before recording a memo, press
 and select Settings → a recording mode:
• Limit for multimedia message: record a voice
memo for adding to an i-MMS message.
• Maximum 1 hour: record a voice memo of up to
one hour.
During playback, use the following keys:
Image editor (Menu 3.3)
Playing a voice memo
40
Function
Key
Function
Centre
Pauses or resumes playback.
Use this menu to edit your photos using various
editing tools.
1. Select a photo or take a new photo.
2. Press  and select Crop.
3. Move the cropping frame to the area of the image
you want.
Press  and select Resize to change the
frame size.
4. Press  and select Done.
5. Press  and select Save as.
6. Enter a new file name and press .
Transforming
1. Select a photo or take a new photo.
2. Press  and select Transform → an
option:
• Resize: change the photo size.
• Rotate: rotate the photo 90 degrees clockwise
or counterclockwise.
• Flip: flip the photo.
3. Press .
4. Press  and select Save as.
5. Enter a new file name and press .
Applications (Menu 3)
Cropping
1. Press  and select New image → Open
or Take photo.
2. Select a photo or take a new photo.
3. Press  and select Effects → an effect
option.
4. Press .
5. Press  and select Save as.
6. Enter a new file name and press .
Menu functions
Applying an effect
Adding visual features
You can decorate photos by adding a frame, an image,
or a note.
1. Select a photo or take a new photo.
2. Press  and select Insert → a feature
type.
3. Select an item or enter text to be inserted.
4. Adjust the position of the inserted item or text
using the Navigation keys.
41
Menu functions
5. Press , or press  and select
Done.
6. Press  and select Save as.
7. Enter a new file name and press .
Merging a stamp effect
This editing tool allows you to make an outline stamp
of a photo and then merge it with another photo. You
can use this tool to create your own photo postcard by
taking a photo of a handwritten message and merging
it with a photo.
1. Select a photo or take a new photo.
2. Press  and select Merge stamp. The
background photo appears in the image box next
to
3. Press  and select Add image.
4. Add a photo by selecting or taking a photo. The
added photo appears in the image box next to
. This will be the stamp.
5. Press  and select Merge. The stamp
photo is added to the background photo as an
outline.
42
6. Press  to access the following stamp
edit options:
• Move: change the position of the stamp.
• Resize: change the stamp size.
• Rotate: rotate the stamp.
• Stamp color: change the stamp colour.
• Shadow on: apply a shadow to the stamp.
7. When you have finished, press  and
select Done.
8. Press  and select Save as.
9. Enter a new file name and press .
Java world (Menu 3.4)
Use this menu to access the list of the applications you
have downloaded from the wireless web.p. 59
World clock (Menu 3.5)
Use this menu to set your local time zone and find out
the current time in another part of the world.
Viewing world time
Applying daylight saving time
Alarm (Menu 3.6)
Use this menu to set alarms. The alert type for a
normal alarm corresponds to the call alert type
settings. A wake-up alarm is not affected by your
sound settings.
Setting an alarm
1. Select the type of alarm.
2. Set each alarm option:
Alarm: activate the alarm.
Alarm time: enter the time for the alarm to
ring.
• AM/PM: set AM or PM in 12-hour format.
• Repeat: select a repeat option.
• Alarm tone: select an alarm tone.
3. Press .
Stopping an alarm
•
•
For a non-wake-up alarm, press any key.
For a wake-up alarm, press  or
[Centre].
Press any key, except for  and
[Centre], to cause it to sound again after 5
minutes. You can do this a maximum of 5 times.
Applications (Menu 3)
1. From the world map, press  and select
Apply daylight saving time.
2. Press [Centre] to select the time zones you want.
3. Press .
•
•
Menu functions
1. From the world map, press [Left] or [Right] to
scroll to the city you want. As the time line moves,
the time and date of the given zone display.
2. Press [Centre] to save the city as your local time
zone.
Setting the alarm to sound when the phone is
off
From the Alarm screen, select Auto power-up → On.
If the phone is off when it is time for the alarm to ring,
the phone switches on and sounds the alarm.
43
Menu functions
Calculator (Menu 3.7)
Use this menu to perform basic arithmetic functions,
such as addition, subtraction, multiplication, and
division.
1. Enter the first number.
• Press <.()> to insert a decimal point or
bracket.
• Press [ ] or [ ] to move the cursor.
2. Press one of the Navigation keys to access the
math function you want.
3. Enter the second number.
4. Press [Centre] to view the result.
5. If necessary, repeat from step 2 to continue the
calculation.
Converter (Menu 3.8)
Use this menu for common conversions, such as
currency and temperature.
1. Select a converter.
44
2. Press [Left] or [Right] to select the original unit
and press [Down].
3. Enter the value to be converted and press [Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to above
zero (+) or below zero (-).
4. Press [Left] or [Right] to select the unit to which
you want to convert.
The equivalent value for the amount you entered
displays.
For the currency converter, you can view and set
currency rates by pressing .
Timer (Menu 3.9)
Use this menu to set a period of time for the phone to
count down. The phone sounds an alarm when the
specified period of time has expired.
Starting the timer
1. Press .
2. Enter the length of time you want to count down
and press .
3. Press [Centre] to start counting down.
•
•
Press any key when the timer rings.
Press [Centre] on the Timer screen to stop the
timer before it rings.
This menu is available if you use a SIM AT card that
supports SIM Application Tool kit menus and provides
additional services, such as news, weather, sports,
entertainment, and location services. Available
services may vary, depending on your service
provider’s plans. For details, see your SIM card
instructions or contact your service provider.
Menu functions
Stopping the timer
SIM AT (Menu 3.12)
Stopwatch (Menu 3.10)
2D Barcode (Menu 3.11)
This menu enables you to save captured barcodes for
your shopping items and use it later. Once you have
captured a barcode, the phone will decode and save it
as data information in the list.
Messages (Menu 4)
Messages (Menu 4)
Use this menu to measure elapsed time. The
maximum time is 10 hours.
1. Press [Centre] to start the stopwatch.
2. Press [Centre] to check an interval. You can repeat
this step for a total of 4 intervals.
Use the Messages menu to send and receive text
messages. You can also use the cell broadcast
message feature.
To access this menu, press [Centre] in Idle mode and
select Messages.
Create message (Menu 4.1)
Short Message Service (SMS) allows you to send text
messages that may include simple pictures, animated
images, and melodies.
45
Menu functions
Creating and sending an SMS message
1. Enter your message and press [Centre].
The maximum number of characters allowed in a
message varies by service provider. If your
message exceeds the maximum number of
characters, the phone will split the message.
2. Enter a destination number.
To send the message to more than one recipient,
fill in additional destination fields.
3. Press [Centre] to send the message.
Using options while composing an SMS
message
While composing a message, press  to
access the following options:
• Save and send: save the message in the Outbox
folder and then send it.
• Send only: just send the message.
• Insert: add a template, Phonebook entry, or
bookmark.
46
•
•
•
•
•
•
Add image/Add animation/Add melody: attach
a simple image, an animated image, or a melody.
Attach: attach a Phonebook entry as a name card
or a calendar data as a data format attachment.
Save in: save the message in another message
folder.
Input language: change the language to be used
in T9 input mode.
Text style: change the text attributes.
Input method: change the text input mode.
My messages (Menu 4.2)
Use this menu to access text messages you have
received, sent, or which have failed in sending.
Inbox (Menu 4.2.1)
This folder stores all the text messages you have
received.
Viewing a message
The following icons may appear on the message list to
show the message type:
•
•
SMS
Delivery report for your sent messages
Using message options
Delivery reports
• Cut address: extract URL, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
• Protection: lock the message to protect it from
being deleted, or unlock the message.
Drafts (Menu 4.2.2)
Messages (Menu 4)
SMS messages
• Reply via: reply to the sender via SMS, i-mail, or
i-MMS.
• Forward: forward the message to other people.
• Delete: delete the message.
• Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Cut media: save media content from the message
to your phone’s memory.
• Protection: lock the message to protect it from
being deleted, or unlock the message. You can
protect only messages stored in the phone’s
memory.
Add to Block list: add the sender’s number to the
Block list to reject the messages from the sender.
Menu functions
While viewing a message, press  to access
the following options:
•
This folder stores text messages you have saved to
send at a later time.
When you select a message, it opens in Edit mode so
that you can edit and send the message.
Outbox (Menu 4.2.3)
This folder stores text messages that the phone is
attempting to send or has failed to send.
The following icons are available to show the message
status:
•
Being sent
•
Failed to be sent
47
Menu functions
While viewing a message, press  to access
the following options:
• Send again: retry sending the message.
• Forward: forward the message to other people.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
• Protection: lock the message to protect it from
being deleted, or unlock the message.
Sentbox (Menu 4.2.4)
This folder stores text messages that you have sent.
While viewing a message, press  to access
the following options:
• Forward: forward the message to other people.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
• Protection: lock the message to protect it from
being deleted, or unlock the message.
48
My folders (Menu 4.2.5)
Use this menu to create new folders and organise your
text messages.
Creating a new folder
1. Press .
2. Enter a folder name and press .
Using folder options
On the folder list, press  to access the
following options:
• Open: open the selected folder.
• Create folder: add a new folder.
• Rename folder: change the folder name.
• Delete: delete the selected folder.
Templates (Menu 4.3)
Use this menu to make and use templates of
frequently used messages.
Creating a template
1. Select an empty location.
2. Enter a message and press .
4. Press  to confirm the deletion.
Using template options
Settings (Menu 4.5)
Use this menu to delete messages in each message
folder all at once.
1. Press [Centre] to select the message folders to be
cleared.
Pressing the key twice displays the message types
so that you can specify the ones to be cleared.
2. Press .
3. Press [Centre] to select the check box to delete
protected messages, and then press .
Text messages (Menu 4.5.1)
You can configure SMS settings.
• Sending options: set up the options for sending
SMS messages:
Send read receipt: allow recipients to reply to
you through your SMS server.
Send delivery receipt: set the network to inform
you when your messages have been delivered.
Character support: select a character encoding
type. If you select Automatic, the phone switches
the encoding type from GSM-alphabet to uni-code
if you enter a Unicode character. Use of Unicode
encoding will reduce the maximum number of
characters in a message to about half. If this menu
Messages (Menu 4)
Delete all (Menu 4.4)
Use this menu to set up various options for using SMS
and CB messages.
Menu functions
From the template list, press  to access
the following options:
• Edit: edit the selected template.
• Send message: create and send a text message
using the template.
• Delete: delete the selected template.
• Add new: add a new template.
49
Menu functions
•
•
•
•
50
is not shown, your phone provides automatic
character encoding by default.
Bearer selection: select either GSM or GPRS
preferred, depending on your network.
Receiving options: activate 3D vivid view mode
for displaying received SMS messages on your
phone. The phone will convert message text to 3D
vivid graphics and displays it in 3D view mode.
This option is available only when the message
consists of a single page.
Block list: store the phone numbers from which
you want to reject messages.
Current profile: select an SMS setting profile.
Profile settings: set the properties of each
profile.
Service centre: store or change the number of
your SMS server.
Default destination: enter the default
destination.
Default type: set the default message type. The
network can convert the messages into the
selected format.
Default validity: set the length of time your
messages are stored in the SMS server.
Setting name: enter a profile name.
Broadcast messages (Menu 4.5.2)
You can change the settings for receiving CB
messages.
• Receive: select to receive CB messages, or not.
• Channel list: indicate the channels from which
you wish to receive CB messages. Please contact
your service provider for further details.
• Language: select the preferred languages in
which CB messages display.
Memory status (Menu 4.6)
Use this menu to view the amount of memory
currently in use in each message folder.
i-mode
(Menu 5)
To access this menu, press [Centre] in Idle mode and
select i-mode. You can also quickly access this menu
by pressing  in Idle mode.
i-Menu (Menu 5.1)
About i-mode
In i-mode, browse through your favourite magazines,
book tickets and hotels for your vacations, find your
favourite club, download the best ringtones and games
at the lowest price, send live e-mails with
photographs. You can do all of these economically
since with i-mode you are charged by the amount of
data you send and receive, not by the length of time
you are online.
Press
scroll through browser items
[Up] or [Down].
select an item
[Centre].
return to the previous page
[Left] or [C].
• Key operations on an i-mode screen depend on
the screen contents at that time.
• You can answer a call while using the i-mode
feature. After ending the call, the display returns
to the function screen you were using.
i-mode (Menu 5)
Use this menu to access the i-mode browser. You can
also quickly launch the browser by pressing and holding
[Centre] in Idle mode.
To
Menu functions
In this menu, you can use the i-mode browser, send or
receive i-mode mails and MMS messages, and access
Java applications.
Navigating the i-mode browser
Using browser options
From any web page, press  to access the
following options:
• Add Bookmark: add a bookmark for the current
page.
• Save Page: save the URL address of the current
page.
• Save Image: save images from the current page.
51
Menu functions
•
•
•
•
•
•
•
•
•
•
•
•
52
Show Properties: access the properties for the
i-mode browser.
Bookmark List: access the bookmark list.
Go to Webpage: enter a URL address or select
one from the Address history list.
Saved Page List: access the list of the URL
addresses you have saved.
Browser Settings: change the settings for the
i-mode browser to suit your preferences.p. 62
i-Menu: access the homepage of your service
provider.
Home: return to the homepage.
Reload: update the current page.
Compose Mail: send the URL address of the
current page via i-mail or i-MMS.
Save in Contacts: save the selected phone
number or e-mail address to Contacts.
Play Animation: play animations on the current
page.
Sound Effect: turn the sound effect on or off.
Exiting the i-mode browser
To exit the browser at any time, press [
].
Mail (Menu 5.2)
Use this menu to use i-mail and i-MMS message
services. You can quickly access this menu by pressing
 in Idle mode.
Compose iMail (Menu 5.2.1)
You can create and send a mail, attaching various
types of media files.
Creating and sending an i-mail
1. Press [Centre].
2. Enter a phone number or e-mail address and press
[Centre].
3. Press [Down] and then [Centre].
4. Enter the mail title and press [Centre].
5. Select the attachment field.
6. Use the following options to add files:
•
Attach File: add images, sounds, videos,
music files, name cards, or schedule items.
•
i-mode (Menu 5)
Attach Melody: add MFi (Melody Format for
i-mode) melody files.
• Attach Bookmark: add URL addresses you
have bookmarked.
You can delete or preview the added items by
selecting Delete Attach File or Play/Display
File.
7. Press [Down] and then [Centre].
8. Enter the mail text and press [Centre].
To insert pictograms into text, press 
and select Pictogram.
You can use the copy and paste feature to quickly
and easily enter text.next section
9. When you have finished, select Send to send the
mail.
Menu functions
According to the Digital Rights Management
(DRM) system, web content may not be able
to be forwarded.
Copying and pasting text
1. While entering text in a mail, place the cursor next
to the text you want to copy.
2. Press  and select Copy messages.
3. Press .
4. Highlight the text as you want by pressing the
Navigation keys and press [Centre].
5. Select Copy to copy the highlighted text.
You can also copy all text in the message by
selecting Copy all.
6. Place the cursor where you want to paste the
copied text.
7. Press  and select Paste.
Using mail options
While creating a mail, press  access the
following options:
• Send: send the mail.
• Save: save the mail to the Draft box.
53
Menu functions
•
•
•
•
•
•
Add Address: add destination numbers or
addresses.
Address Menu: edit destination numbers or
addresses. You can change the selected number or
address to another, or change an address type (To,
Cc, Bcc).
Attach File Menu: add media files, name cards,
schedule items, or bookmarks.
Attach Signature: attach your signature, as
specified in the Edit signature option of Mail
settings.
Delete Body: delete the body of the mail.
Delete Message: cancel composing the mail.
2. Enter a phone number or e-mail address and press
[Centre].
3. Press [Down] and then [Centre].
4. Enter the message title and press [Centre].
5. Select the SMIL field.
6. Use the following options for creating an SMIL
slide:
• Send: send the message.
• Save: save the message in the Draft folder.
• Preview: view the message as it will be shown
on the recipient’s phone.
• Media: add text, images, sounds, or videos.
According to the Digital Rights Management
(DRM) system, web content may not be able
to be forwarded.
Compose iMMS (Menu 5.2.2)
Using Multimedia Message Service (MMS), you can
send and receive i-MMS messages containing a
combination of text, image, video, and audio, from
phone to phone or from phone to e-mail.
Creating and sending an i-MMS message
1. Press [Centre].
54
•
Fit mode: select the size in which the image
displays.
Hidden: the image displays in its actual size.
Fill: the image is scaled to fit into the display
area.
•
i-mode (Menu 5)
•
Add: add a new slide after the currently
selected slide. Once you have added slides, you
can scroll between them by pressing [Left] or
[Right].
Insert: insert a new slide before the currently
selected slide.
Delete: delete the selected slide.
Clear: clear the content of the selected slide.
7. When you have finished, on the slide preview
screen, press  and select Send to send
the message.
Menu functions
•
Meet: the image is scaled so that the longer
side, either the height or width, fits the
corresponding side of the display area.
Slice: the image is scaled so that the shorter
side, either the height or width, fits the
corresponding side of the display area.
Options: change the display time for each
item in the message, such as a slide, text,
image, or audio clip.
Arrange Slide: customise slide settings.
Text Color: select a colour for the message
text.
Background Color: select a colour for the
slide background.
Change Region Size: change the size of the
image area. Press [Up] or [Down] to move the
border line.
Swap Position: switch the order of the added
image and text.
Slide: add or delete slides.
Using message options
While creating an i-MMS message, you can access a
variety of options by pressing .p. 53
Inbox (Menu 5.2.3)
Use this menu to access i-mails and i-MMS messages
you have received.
When the Inbox reaches its maximum limit, new
i-mails or i-MMS messages will overwrite old
messages that have already been read.
55
Menu functions
Viewing a message
•
1. Select a folder.
2. Select a message.
3. Press [Left] or [Right] to scroll through slides.
•
Using message options
While viewing an i-mail or i-MMS message, press
 to access the following options:
• Reply: send a reply to the sender or all of the
recipients of the message. You can also send a
reply with the message included.
• Forward: forward the message to other people.
• Move: move the message to another folder.
• Delete: delete the message.
• Protect On/Off: protect the message from being
deleted.
• Save in Contacts: save the sender’s address or
phone number to Contacts.
• Save Melody: save the MFi (Melody Format for
i-mode) melody files attached to the message.
56
•
•
Save Attached File: save the attached files in the
phone’s memory.
Copy: copy the message title or sender’s address.
You can also copy the text of the mail.
Play SMIL: play the SMIL slides of an i-MMS
message automatically.
Browse SMIL: play the SMIL slides of an i-MMS
message manually. Press [Left] or [Right] to move
to the next slide.
On the message list, press  to access the
following options:
• Move: move the selected message to another
folder.
• Delete: delete the selected message.
• Selective Delete: delete the messages you
select.
• Delete All: delete all messages.
• Protect On/Off: protect the message from being
deleted.
• Sort: sort messages by title, address, or date.
•
•
Sent (Menu 5.2.4)
Use this menu to access the i-mails and i-MMS
messages you have sent.
Browse SMIL: play the SMIL slides of an i-MMS
message manually. Press [Left] or [Right] to move
to the next slide.
On the message list, press  to access the
following options:
• Edit: edit the message.
• Delete: delete the selected message.
• Selective Delete: delete the messages you
select.
• Delete all: delete all messages.
• Protect On/Off: protect the message from being
deleted.
• Sort: sort messages by title, address, or date.
• Filter: set messages to be displayed by the
selected filter.
• Export: save the selected message in the phone’s
memory. The message is saved in the My
vMessages folder. p. 67
i-mode (Menu 5)
While viewing a message, press  to access
the following options:
• Edit: edit the message and then send it.
• Delete: delete the current message.
• Protect On/Off: protect the message from being
deleted.
• Save in Contacts: save the sender’s address or
phone number to Contacts.
• Copy: copy the message’s title or sender’s
address.
• Play SMIL: play the SMIL slides of an i-MMS
message.
•
Menu functions
Filter: set messages to be displayed by the
selected filter.
Export: save the selected message in the phone’s
memory. The message is saved in the My
vMessages folder.p. 67
57
Menu functions
Draft (Menu 5.2.5)
•
Use this menu to access i-mails and i-MMS messages
you have saved or failed to send.
When you select a message in the Draft box, the
message opens in Edit mode so that you can edit and
send the message.
Check New Mail (Menu 5.2.6)
Use this menu to check the i-mode server for new
i-mails and i-MMS messages and then retrieve them to
the phone.
Mail Settings (Menu 5.2.7)
Use this menu to change the various settings for
sending and receiving i-mails and i-MMS messages.
• Communication: change the settings for sending
or receiving messages.
Auto Receive: set the phone to retrieve new
messages from the i-mail server as soon as they
arrive at the server.
Receive Attach File: select the types of
attachments you want to receive.
58
•
Edit: edit your signature or a quotation of your
messages.
Edit Signature: enter a tag line to be inserted at
the end of your message. If you select Auto
Attach, the signature will be automatically
attached to all of your outgoing messages.
Edit Quotation: enter characters or words to be
inserted at the start of your original mail when you
reply to or forward a message.
View: change the view settings.
Screen Scroll: select the number of lines a
message displays.
Font Size: select a font size to be used for
displaying messages.
List Display: select the number of lines and the
type of information, for example, subject or
address, to be displayed on the list.
Folder Security: locks message folders to protect
them from unauthorised viewing.
Auto Play: set a sound, video, or SMIL slide to be
automatically played when you open a message.
Use this menu to download and play games and Java
applications from various sources using the i-mode
browser.
On the Java application list, press  to
access the following Java system options:
• Create Folder: create a folder
• Delete Folder: delete the selected folder.
• Rename Folder: change the name of the folder.
•
•
•
•
•
•
•
•
Move To Folder: move the selected Java
application to another folder.
Upgrade: update the selected Java application.
Delete: delete the selected Java application.
Delete All: delete all Java applications.
Sort: sort Java applications by name, time, used
memory.
Properties: access the Java application
properties.
Certificate: access the Java application
certificate.
Network Setting: select whether or not the Java
application connects to the network when it runs, if
the selected one is an online application.
i-Appli To Setting: set whether or not the
selected Java application accesses the website to
run. This option is available only when the
LaunchByBrowser key or the AllowPushBy key is
present in the ADF.
i-mode (Menu 5)
Java (Menu 5.3)
•
Menu functions
•
•
•
Pasted Data: set MFi (Melody Format for i-mode)
melody files or links to java resources to be
inserted when you are creating a message. The
added data, however, will be sent as a data format
attachment.
Check Settings: check your current mail settings.
Reset Settings: restore the default settings.
Check Storage: check the total amount of
memory and the amount of memory currently in
use in each message folder.
59
Menu functions
•
•
•
•
•
•
Icon Info Setting: set whether or not your phone
operates the selected Java application using phone
system information. This option is available only
when the GetSysInfo key is present in the ADF.
AutoStart Setting: select whether or not the Java
application launches automatically when selected.
Show Desc Setting: set whether or not the
description of a Java application is displayed before
downloading.
AutoStart Failure: set whether or not the Java
application launches automatically after the launch
fails.
Trace Info.: access trace information for a Java
application.
System Info: access system information for a
Java application.
SMS (Menu 5.4)
Use this menu to create and send text messages.
p. 45
60
Bookmarks (Menu 5.5)
Use this menu to access URL addresses of websites
you have bookmarked while navigating the wireless
web.
Press  to access the following options:
• Go To: go to the bookmarked page.
• Title: edit the title of the bookmark.
• Delete: delete the selected bookmark.
• Selective Delete: delete the messages you
select.
• Delete All: delete all bookmarks.
• Show Address: display URL addresses you have
bookmarked.
• Copy Address: copy the URL address of the
bookmark.
• Compose Mail: send the bookmark via i-mail or
i-MMS.
• Send via Infrared: send the bookmark via the
infrared port.
Go to Webpage (Menu 5.6)
Saved Pages (Menu 5.7)
Use this menu to access the web pages you have
saved.
Sound Effect: turn the sound effect on or off.
Edit Title: change the title of the page.
Delete: delete the page.
Protect On/Off: protect the page from being
deleted.
From the web page list, press  to access
the following options:
• Show: open the selected page.
• Edit Title: change the title of the selected page.
• Delete: delete the selected page.
• Selective Delete: delete the messages you
select.
• Delete All: delete all saved pages.
• Show Address: display the address of the web
page.
• Protect On/Off: protect the page from being
deleted.
i-mode (Menu 5)
While viewing a web page, press  to access
the following options:
• Save Image: save images from the current page.
• Show Properties: access various page and server
properties.
Address: display the URL address of the current
page.
Page Properties: access the properties of the
current page.
Certificates: access the server certificate.
• Play Animation: play animations on the current
page.
•
•
•
•
Menu functions
Use this menu to access a specific website by
manually entering a URL address or selecting one from
the Address history list.
61
Menu functions
Browser Settings (Menu 5.8)
Use this menu to change the settings for the i-mode
browser to suit your preferences.
• Home: enable or disable the homepage of the
i-mode browser.
• View: change the view settings for text and
display on web pages.
Font Size: select a font size to be used for
displaying text on web pages.
Images: set whether or not the phone displays
images on web pages.
Table Layout: select a layout for the web page.
Wrap Text: set whether the phone wraps text on
web pages to fit your phone’s display, or displays
text as it is on the web page.
CSS: set whether or not the phone uses a style
sheet for presenting documents on a web page.
Screen Scroll: select the number of lines the web
page displays.
62
•
•
•
•
•
•
Certificates: view the list of server certificates
you have received while navigating the wireless
web, or switch the selected certificate from valid to
invalid, or vice versa.
Others: change other settings.
Connection Timeout: set the phone to
disconnect from the network after a specified
length of time of inactivity.
Send Terminal Info: set whether or not the
phone sends its information to the web server
while navigating the wireless web.
Auto Play: set whether or not the phone
automatically plays videos after downloading.
Sound Effect: turn the sound effect on or off.
Storage Device: select the default memory
location, phone or memory card, for downloaded
files.
Check Settings: check your current settings.
Reset Settings: restore the default settings.
Reset Data: reset data you have downloaded.
My files (Menu 6)
To access this menu, press [Centre] in Idle mode and
select My files.
Images (Menu 6.1)
This menu displays photos you have taken and images
you have downloaded, received in messages, or
imported from your computer. You can also store SWF
(flash animation) files you have downloaded from the
i-mode browser.
Viewing an image
1. Select an image folder.
2. Select an image.
Viewing a slide show
You can view your photos as a slide show, a sequential
presentation of each photo in the current folder.
1. Select My photos.
2. Press  and select Slide show.
3. Select an interval option.
The slide show begins.
4. Press  to stop the slide show.
My files (Menu 6)
According to the Digital Rights Management (DRM)
system, web content may not be able to be
forwarded. They are indicated by
Menu functions
The My files menu allows you to access images,
videos, music files, and sound files stored in the
phone’s memory or on a memory card. You can also
store decorative photo frames downloaded from the
i-mode browser and i-mode messages downloaded
from the i-mode server.
You cannot move or copy SWF files stored here to
another folder or a memory card, and cannot send
or receive them to/from other people.
Using image options
While viewing an image, press  to access
the following options:
• List: return to the image list.
63
Menu functions
•
•
•
•
•
•
•
•
•
•
•
64
Send via: send the file via i-mail, i-MMS, or
Bluetooth.
Set as: set the file as wallpaper for the displays or
as a caller ID image for a Phonebook entry.
Edit: edit the image using the Image editor, if it is
a photo taken by the camera on the phone.
p. 40
Delete: delete the selected file or all files.
Rename: change the file name.
Move to: move the file to another folder or to a
memory card.
Copy to memory card: copy the file to a memory
card.
Bluetooth visibility: share the file or all files with
other Bluetooth devices.
Protection: lock the file to protect it from being
deleted, or unlock the file.
Print via Bluetooth: print the file by connecting
the phone to a printer via Bluetooth. Some printers
may not be compatible with the phone.
Details: access the file properties.
Videos (Menu 6.2)
This menu displays video clips you have recorded,
downloaded, received in messages, or imported from
your computer.
Video clips recorded on other devices, such as
camcorders, may not play correctly.
Playing a video clip
1. Select a video folder.
2. Select a video clip.
During playback, use the following keys:
Key
Function
Centre
Pauses or resumes playback.
Left
Moves backward in a file.
Right
Down
Skips forward in a file.
Adjusts the volume.
Stops playback.
Using video options
•
•
•
•
Delete: delete the selected file.
Rename: change the file name.
Move to: move the file to another folder or to a
memory card.
Copy to memory card: copy the file to a memory
card.
•
•
Bluetooth visibility: share the file or all files with
other Bluetooth devices.
Protection: lock the file to protect it from being
deleted, or unlock the file.
Details: access the file properties.
Music (Menu 6.3)
This menu displays music files you have downloaded
or imported from your computer.
Select a file. The music player opens.p. 38
My files (Menu 6)
• To set a video clip as a ringtone, the video
clip must be recorded with audio.
• To set a video clip as wallpaper, the video clip
must be saved in 3GP format.
•
Menu functions
After playback, press  to access the
following options:
• List: return to the video list.
• Send via: send the file via i-mail, i-MMS, or
Bluetooth.
• Set as: set the file as your ringtone, as a caller ID
image for a Phonebook entry, or as wallpaper for
the main display.
Sounds (Menu 6.4)
This menu displays voice memos you have recorded,
and sound files you have downloaded, received in
messages, or imported from your computer. You can
also store MFi (Melody Format for i-mode) melody files
you have downloaded from the i-mode browser.
Playing a sound clip
1. Select a sound folder.
2. Select a sound clip. For a voice memo, see Voice
recorder. p. 40
65
Menu functions
66
Using sound options
Frame (Menu 6.5)
While playing a sound clip, press  to
access the following options:
• List: return to the sound list.
• Send via: send the file via i-mail, i-MMS, or
Bluetooth.
• Set as: set the file as your ringtone or as a
ringtone for a Phonebook entry.
• Delete: delete the selected file.
• Rename: change the file name.
• Move to: move the file to another folder or to a
memory card.
• Copy to memory card: copy the file to a memory
card, if you use.
• Bluetooth visibility: share the file or all files with
other Bluetooth devices.
• Protection: lock the file to protect it from being
deleted, or unlock the file.
• Details: access the file properties.
This menu displays decorative photo frames you have
downloaded from the i-mode broswer. You can also
take a photo with one of the downloaded frames.
Taking a photo with a frame
1. Select a frame.
2. Press  and select Take photo to turn
on the camera.
3. Press [ ] to take a photo. The photo is saved in
the My photos folder.
Using frame options
From the frame list, press  to access the
following options:
• View: display the frame.
• Take photo: take a photo with the selected frame.
• Delete: delete the selected file or all files.
• Rename: change the file name.
• Protection: lock the file to protect it from being
deleted, or unlock the file.
•
Details: access the file properties.
•
•
This menu displays i-mails or i-MMS messages you
have saved from the i-mode server to the phone’s
memory.
•
Using i-mode message options
Other files (Menu 6.7)
Use this menu to view various document files and files
stored in the phone’s memory without corruption.
Available file formats are DOC, XLS, PPT, PDF, TXT,
HTM, HTML, and MHT.
My files (Menu 6)
From the message list, press  to access
the following options:
• Import: retrieve the selected message from the
i-mode server and open it.
• Send via: send the message via Bluetooth.
• Delete: delete the selected message or all
messages.
• Rename: change the message name.
• Move to memory card: move the message to a
memory card.
• Copy to memory card: copy the message to a
memory card.
Menu functions
My vMessages (Menu 6.6)
Bluetooth visibility: share the message or all
messages with other Bluetooth devices.
Protection: lock the message to protect it from
being deleted, or unlock the message.
Details: access the message properties.
Viewing a file
Select a file. Picsel File Viewer runs to open the
document.
• Depending on the file size or memory capacity of
Picsel File Viewer, a file may not open properly.
• If a document file contains languages
unsupported by Picsel File Viewer, the content of
the document will not display correctly
67
Menu functions
Use the following keys to view the document:
Key
Function
Up/Down/
Left/Right
Pans around the page.
Zooms in or out.
•
•
•
•
•
Centre
Fits the document to the page size.
Returns to the first page.
Returns to the previous page.
Rotates the document.
•
Moves to the next page.
Moves to the last page.
•
•
Changes the display to Full screen
view or Normal screen view.
•
Using document options
While viewing a document, press  or
< > to access the following options:
68
•
•
•
•
Full screen view/Normal view: change the
display to Full screen view or to Normal screen
view.
Zoom: zoom in or out.
Fit to: fit the document to the page size, screen
width, or screen height.
Go to: move to another page of the document.
Rotate: rotate the document.
Screen panning/Normal panning: change the
panning mode to by screen or by preset pixel.
Hide controller/Show controller: (for Full
screen view) hide or display the Viewer control bar.
Send via bluetooth: send the file via Bluetooth.
Move to memory card: move the file to a
memory card.
Copy to memory card: copy the file to a memory
card.
Delete: delete the selected file.
Rename: change the file name.
Bluetooth visibility: share the file or all files with
other Bluetooth devices.
•
Memory card (Menu 6.8)
Your phone is preset to use FAT16-formatted
memory cards. If you insert a FAT32-formatted
memory card, the phone will ask you to reformat the
memory card. If you do not, you will not be able to
access the card from the phone.
Memory status (Menu 6.9)
Use this menu to view memory information for media
items in the phone’s memory or on a memory card.
For the phone’s memory, press [Left] or [Right] to
view the memory status by size or number of items.
The Calendar menu enables you to keep track of your
schedule.
To access this menu, press [Centre] in Idle mode and
select Calendar.
Selecting a day on the calendar
When you enter the Calendar menu, the calendar in
Month view appears with today’s date indicated by a
blue box.
• Press [Left] or [Right] to move by day.
• Press [Up] or [Down] to move by week.
• Press [ / ] to move by month.
Calendar (Menu 7)
Use this menu to access the files stored in a memory
card. This menu is shown only when a memory card is
inserted into the phone.
Calendar (Menu 7)
Menu functions
•
•
Protection: lock the file to protect it from being
deleted, or unlock the file.
Details: access the file properties.
Shortcuts: view the functions of the keys you can
use in Picsel File Viewer.
Creating an item
You can store appointments, anniversaries, memos,
and tasks on the calendar. More than one item per day
can be stored.
69
Menu functions
Entering an appointment
1. Select a date on the calendar.
2. Press  and select Create →
Appointment.
3. Enter information or change the settings:
• Subject: enter a title for the appointment.
• Details: enter the appointment details.
• Start date and Start time: enter the starting
date and time for the appointment.
• AM/PM: select AM or PM in 12-hour time
format.
• End date and End time: enter the ending date
and time for the appointment.
• AM/PM: select AM or PM in 12-hour time
format.
• Location: enter information about the
appointment location.
• Alarm: set an alarm for the appointment.
• Before: set how long before the appointment
the alarm is to alert you.
• Alarm tone: select an alarm tone.
70
Repeat: set the appointment to recur and
select a repeat option.
• Until: set the ending date, if the appointment
will recur.
4. Press  to save the appointment.
•
Entering an anniversary
1. Select a date on the calendar.
2. Press  and select Create →
Anniversary.
3. Enter information or change the settings:
• Occasion: enter information about the
anniversary.
• Date: enter the date.
• Alarm: select to set an alarm for the
anniversary.
• Before: set how long before the anniversary
the alarm is to alert you.
• Alarm time: enter the time for the alarm to
sound.
• AM/PM: select AM or PM in 12-hour time
format.
Alarm tone: select an alarm tone.
Repeat every year: set the phone to remind
you of the anniversary every year.
4. Press  to save the anniversary.
Consulting the calendar
Entering a memo
•
Appointment
•
Anniversary
1. Select a date on the calendar.
2. Press  and select Create → Memo.
3. Enter a memo and press .
•
Task
•
Memo
•
•
Viewing an item
1. Select a date on the calendar to display the items
for the day.
2. Select an item to view its details.
3. Press [Left] or [Right] to access the other items
scheduled for the selected day.
Calendar (Menu 7)
1. Select a date on the calendar.
2. Press  and select Create → Task.
3. Enter information or change the settings:
• Task: enter information about the task.
• Start date: enter the starting date.
• Due date: enter the ending date.
• Select priority: select a priority level.
4. Press  to save the task.
Menu functions
Entering a task
Once you have created items, the item icons and the
number of items for a specific day appear at the
bottom of the calendar.
While viewing an item, press  to access
the following options:
• Edit: edit the item.
• Create: add a new item.
• Send via: send the item via SMS, i-mail, i-MMS, or
Bluetooth.
71
Menu functions
•
•
•
View by: change the view mode of the calendar.
Delete: delete the item.
Memory status: access memory information for
the items stored on the calendar.
You can change the calendar display to Day view or
Week view. Press  and select View by → a
view mode.
Using calendar options
Day view
On the calendar, press  to access the
following options:
• View by: change the view mode of the
calendar.next section
• Create: add a new item.p. 69
• Go to: enter the specific date you want to access.
• Event list: sort items by type of item.
• Delete: delete the items stored on the calendar by
using various deleting options.
You can view items for the selected date. Select an
item to view its details.
You can delete recurring events in Day view
only.
•
•
72
Viewing items in a different mode
Missed alarm events: view items whose alarms
you have missed.
Memory status: access memory information for
the items stored on the calendar.
The following icons may display to indicate the item
status:
•
Alarm set
•
Recurring item
•
To do item priority (Red: high, Blue: normal,
Grey: low)
•
Completed task
Week view
You can view items for the selected week. A cell on the
timetable indicates the presence of item information.
Select a cell in the day you want.
Camera (Menu 8)
You can use the camera module embedded in your
phone to take photos and record videos.
Press
access photo options
.p. 75
delete the photo
[C].
return to Capture mode
Taking a photo
.
Using camera options in Capture mode
You can take photos in various modes. The camera
produces JPEG photos.
When you take a photo in direct sunlight or in bright
conditions, shadows may appear on the photo.
Taking a photo with the phone open
1. Access the Camera menu or press and hold [
to turn on the camera.
4. To
Camera (Menu 8)
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are
not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Menu functions
To access this menu, press [Centre] in Idle mode and
select Camera, or press and hold [ ].
2. Make any desired adjustments.
• Press <
> to access camera options.
next section
• Use the keypad to change the camera settings
or switch to other modes.p. 75
3. Press [ ] to take a photo. The photo is saved in
the My photos folder.
In Capture mode, press <
> to access the following
options:
• Record video: switch to Record mode.
• Shooting mode: take a photo in the following
modes:
73
Menu functions
•
•
•
•
•
74
Single shot: take a photo in normal mode. You
can select whether or not the camera automatically
saves a photo.
Multi-shot: take a series of action stills. You can
select the number of photos the camera will take
and the shooting speed.
Mosaic shot: take several stills and save them in
one frame. You can select the layout.
Effects: change the colour tone or apply a special
effect.
Frames: apply a decorative frame.
Timer: set a time delay before the camera takes a
photo.
Go to My photos: access the My photos folder.
Settings: change the default settings for taking a
photo.
Size: select an image size.
Quality: select an image quality setting.
Viewfinder: select a preview screen.
•
Scene programs: set whether or not to use Night
shot mode.
Shutter sound: select the sound that you hear
when you press the shutter release, [ ].
Zoom sound: turn the sound effect for zooming
on or off.
Brightness sound: turn the sound effect for
brightness adjustment on or off.
White balance: adjust the colour balance of the
image. You can make your photo appear warmer
or cooler.
ISO: change the ISO setting, which controls the
sensitivity of your camera. For low light situations,
select a higher ISO number. The higher the ISO
number, the faster the camera shutter functions
and the more sensitive the camera is to light.
Higher ISO settings may bring some distortion to
an image.
Camera shortcuts: view the functions of the keys
you can use in Capture mode.
Using the keypad in Capture mode
You can use the keypad to customise your camera
settings in Capture mode.
Function
Left/Right
Adjusts the brightness.
Up/Down
Zooms in or out.
Flips the image vertically.
Switches to Record mode.p. 76
Changes the image size.
Changes the image quality.
Changes the shooting mode.
Changes the colour tone or applies a
special effect.
Changes the ISO setting.
Selects a decorative frame.
Sets the timer.
Goes to the My photos folder.
Determines the use of the flash.
Changes the preview screen.
Changes the white balance.
Using photo options
Camera (Menu 8)
Shows the mirror image.
Function
Menu functions
Key
Key
After saving a photo, press  to access the
following options:
• Viewfinder: return to Capture mode.
• Send via: send the file via i-mail, i-MMS, or
Bluetooth.
• Set as: set the photo as wallpaper for the displays
or as a caller ID image for a Phonebook entry.
• Edit: edit the photo using the Image editor.
p. 40
• Delete: delete the file.
75
Menu functions
•
•
•
•
•
Rename: change the file name.
Go to My photos: access the My photos folder.
p. 63
Protection: lock the file to protect it from being
deleted, or unlock the file.
Print via Bluetooth: print the file by connecting
the phone to a printer via Bluetooth. Some printers
may not be compatible with the phone.
Details: access the file properties.
Taking a photo with the phone closed
1. Press and hold [
].
2. To
flip the image vertically
Press
[ ].
show the mirror image
[ ].
adjust the brightness
].
zoom in or out
].
3. Press [ ] to take a photo. The photo is
automatically saved.
76
Recording a video
You can record a video of what is displayed on the
camera screen and save it.
Recording a video with the phone open
1. In Capture mode, press [1].
2. Make any desired adjustments.
> to access camera options.
• Press <
next section
• Use the keypad to change the camera settings.
p. 77
3. Press [ ] to start recording.
4. Press [Centre] or [ ] to stop recording. The video
is automatically saved in the My video clips
folder.
5. To
Press
play back the video clip
[Centre].
access video options
.
return to Record mode
.
Using camera options in Record mode
Camera (Menu 8)
•
Quality: select an image quality setting.
Viewfinder: select a preview screen.
Audio record: record audio with a video clip.
Zoom sound: turn the sound effect for zooming
on or off.
Brightness setting tone: turn the sound effect
for brightness adjustment on or off.
White balance: adjust the colour balance of the
image. You can make your video appear warmer or
cooler.
Camcorder shortcuts: view the functions of the
keys you can use in Record mode.
Menu functions
In Record mode, press <
> to access the following
options:
• Take photo: switch to Capture mode.
• Effects: change the colour tone or apply a special
effect.
• Timer: set a time delay before the camera starts
recording.
• Go to My video clips: access the My video clips
folder.
• Settings: change the following settings for
recording a video:
Recording mode: select a video recording mode.
Select Limit for i-mms/Wallpaper to record a
video suitable for an i-mail or i-MMS message or
for setting as wallpaper. The video clip is saved in
3GP format.
Select Normal to record a video within the limit of
the currently available memory. The video clip is
saved in MP4 format.
Size: select a frame size.
Using the keypad in Record mode
You can use the keypad to customise your camera
settings in Record mode.
Key
Function
Left/Right
Adjusts the brightness.
Up/Down
Zooms in or out.
77
Menu functions
Key
Function
Changes the preview screen.
After saving a video clip, press  to access
the following options:
• Viewfinder: return to Record mode.
• Send via: send the file via i-mail, i-MMS, or
Bluetooth.
• Set as: set the file as your ringtone, as a caller ID
image for a Phonebook entry, or as wallpaper for
the main display.
• Delete: delete the file.
• Rename: change the file name.
• Go to My video clips: access the My video clips
folder.p. 64
• Protection: lock the file to protect it from being
deleted, or unlock the file.
• Details: access the file properties.
Determines the use of the flash.
Recording a video with the phone closed
Flips the image vertically.
Shows the mirror image.
Switches to Capture mode.p. 73
Changes the frame size.
Changes the image quality.
Changes the video recording mode.
Changes the colour tone or applies a
special effect.
Mutes or unmutes audio.
Sets the timer.
Goes to the My video clips folder.
Changes the white balance.
78
Using video options
1. Press and hold [
2. Press and hold [
].
] to switch to Record mode.
flip the image vertically
[ ].
show the mirror image
[ ].
adjust the brightness
].
zoom in or out
].
Use this menu to change the time and date displayed
on your phone. Before setting the time and date,
specify your time zone in the World clock menu.
p. 42
• Set time: enter the current time.
• AM/PM: select AM or PM in 12-hour time format.
• Time format: select a time format.
• Set date: enter the current date.
• Calendar starting day: set which day of the
week the calendar starts with.
4. Press [ ] to start recording.
5. Press [ ] to stop recording. The video clip is
automatically saved.
Settings (Menu 9)
The Settings menu provides you with various setting
options to customise the phone to your preferences
and needs. You can also reset the settings to their
default status.
To access this menu, press [Centre] in Idle mode and
select Settings.
Settings (Menu 9)
Time and date (Menu 9.1)
Menu functions
Press
3. To
Phone settings (Menu 9.2)
Many different features of your phone’s system can be
customised to suit your preferences.
Language (Menu 9.2.1)
Use this menu to select a language for the display
text. If you select Automatic, the phone uses the
same language as the SIM card.
79
Menu functions
Greeting message (Menu 9.2.2)
Volume key (Menu 9.2.4)
Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
Use this menu to set whether the phone mutes the call
ringer or rejects a call if you press and hold [ / ]
when a call comes in.
Shortcuts (Menu 9.2.3)
You can use the Navigation keys as shortcuts to access
specific menus directly from Idle mode. Use this menu
to assign a shortcut to a key.
Assigning a shortcut menu
1. Select a key to be used as a shortcut key.
2. Select a menu to be assigned to the key.
Using shortcut options
Press  to access the following options:
• Change: assign or change a shortcut menu.
• Remove: deactivate the shortcut assignment to
the selected key.
• Remove all: deactivate all shortcut assignments.
Extra settings (Menu 9.2.5)
You can turn the automatic redialling or answering
feature on or off, and lock the external keys.
• Auto redial: set the phone to make up to ten
attempts to redial a phone number after an
unsuccessful call.
• Active flip: answer an incoming call by opening
the phone.
• Anykey answer: answer an incoming call by
pressing any key, except for [ ] and .
• Cover keypad lock: lock the exposed keys to
keep accidental presses from affecting your
phone’s operation when the phone is closed.
Display settings (Menu 9.3)
Use this menu to change settings for the display and
backlight.
80
Dialling display (Menu 9.3.4)
You can set up the idle screen on both displays.
• Main display: select an image or video clip to be
displayed on the main display.
• Cover display: select an image to be displayed on
the external display.
• Text position: select a text position. If you don’t
want to display text in Idle mode, select Off.
• Text mode: select a font style.
• Text colour: select a font colour.
• Graphic logo: set the phone to display a graphic
icon instead of the service provider’s logo on the
idle screen. This is only available if a graphic icon
has been received in a message.
Use this menu to select a font colour for the numbers
entered while dialling.
You can select a skin colour pattern for Menu mode.
Brightness (Menu 9.3.3)
You can adjust the brightness of the main display for
varying lighting conditions.
Show caller information (Menu 9.3.5)
Use this menu to set the phone to display missed call
notifications with the most recently missed caller’s
information. To set the external display to show caller
information, select Also on cover display.
TV-out settings (Menu 9.3.6)
Settings (Menu 9)
Skin (Menu 9.3.2)
Menu functions
Wallpaper (Menu 9.3.1)
Use this menu to select the video system for a TV.
Sound settings (Menu 9.4)
Use this menu to customise various sound settings.
Incoming call (Menu 9.4.1)
Use this menu to change the sound settings for
incoming calls.
• Ringtone: select a ringtone to be used for the call
ringer.
• Volume: select a ringtone volume.
81
Menu functions
•
Alert type: specify how you are to be informed of
incoming calls.
Keypad tone (Menu 9.4.2)
Use this menu to select the tone that the phone
sounds when you press a key.
You can adjust the key tone volume using [ / ] in
Idle mode.
Message tone (Menu 9.4.3)
Use this menu to change the sound settings for
incoming SMS messages, i-mails, i-MMS messages,
and CB messages individually.
• Tone: select one of several message tones.
• Alert type: specify how you are to be informed
when a message comes in.
• Repetition: specify how often the phone informs
you of a new message.
Power on/off (Menu 9.4.4)
Use this menu to select the melody that the phone
sounds when it is switched on or off.
82
Flip tone (Menu 9.4.5)
Use this menu to select the tone that the phone
sounds when you open or close the phone.
Quiet mode (Menu 9.4.6)
Use this menu to set how the phone acts to alert you
to a specific event while in Quiet mode.
Extra tones (Menu 9.4.7)
Use this menu to customise additional tones for the
phone.
• Minute minder: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
• Connection tone: set the phone to beep when an
outgoing call is connected to the system.
• Alert on call: set the phone to beep when you
receive a new message or when the time for an
alarm comes during a call.
• Indicative tone: set the phone to beep when you
have made a mistake or something wrong happens
on the phone.
Light settings (Menu 9.5)
Use this menu to change the settings for the light.
•
Custom time: you can specify the time period
that the keypad light is used.
Network services (Menu 9.6)
You can change the settings for backlight and icons.
• Main display normal: select the length of time
the backlight stays on.
• Main display dim: select the length of time the
display stays on in Dim mode after the backlight
turns off. After a specified time, the display turns
off.
• Show cover indicators: set whether or not the
cover display icons are shown on the external
display.
Use this menu to access network services. Please
contact your service provider to check their availability
and subscribe to them, if you wish.
Use this menu to set how the phone controls the use
of the keypad light. Select one of the following options
in the Use at line:
• Any time: the keypad light is always used.
• Night time: the keypad light is used only between
5:00 PM and 9:00 AM.
Call diverting (Menu 9.6.1)
This network service reroutes incoming calls to a
phone number that you specify.
1. Select a call diverting option:
• Divert always: divert all calls.
• Busy: divert calls when you are on another
call.
• No reply: divert calls when you do not answer
the phone.
• Unreachable: divert calls when you are not in
an area covered by your service provider or
when your phone is switched off.
• Cancel all: cancel all call diverting options.
2. Select the type of calls to be diverted.
Settings (Menu 9)
Keypad light (Menu 9.5.2)
Menu functions
Backlight time (Menu 9.5.1)
83
Menu functions
3. Select Activate. To deactivate call diverting, select
Deactivate.
4. Move to the Divert to line.
5. Enter the number to which calls are to be diverted.
6. If you selected No reply, move to the Seconds
line and select the length of time the network
delays before diverting a call.
7. Press .
Call waiting (Menu 9.6.3)
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which call waiting option
will apply.
2. Select Activate. To deactivate call waiting, select
Deactivate.
Network selection (Menu 9.6.4)
Caller ID (Menu 9.6.5)
Some networks may not allow you to change this
setting.
Voice mail server (Menu 9.6.6)
Use this menu to store the number of the voicemail
server and access your voicemails.
You must store the voicemail server number before
accessing the server. Your service provider can give
you the number.
•
Connect to voice server: connect to the
voicemail server to listen to your voicemails.
Voice server number: change the voicemail
server number.
Closed user group (Menu 9.6.7)
Use this menu to set incoming and outgoing calls to be
restricted to a selected user group. For details about
how to create a closed user group (CUG), contact your
service provider.
• Index list: add, delete, or activate CUG index
numbers.
• Outside access: enable calls to numbers other
than those in the closed user group. This feature
depends on the nature of your CUG subscription.
• Default group: enable the default CUG, if you
have set one with your service provider. When
making a call, you are given the option of using
your default CUG, instead of selecting one from the
list.
Settings (Menu 9)
This network service allows you to hide your phone
number from the person you are calling. If you select
Default, the phone will use the default setting
provided by the network.
•
Menu functions
This network service allows you to either automatically
or manually select the network to be used while
roaming outside of your home area. You can select a
network other than your home network only if there is
a valid roaming agreement between the two.
85
Menu functions
Bluetooth (Menu 9.7)
Setting up the Bluetooth feature
Using the Bluetooth feature, you can connect the
phone wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or control
the phone remotely.
The Bluetooth menu provides the following options:
• Activation: activate or deactivate the Bluetooth
feature.
• My devices: search for connectable Bluetooth
devices.
• My phone’s visibility: allow other Bluetooth
devices to search for your phone.
• My phone’s name: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
• Secure mode: determine if the phone asks for
your confirmation when other devices access your
data.
• Bluetooth services: display available Bluetooth
services.
Bluetooth technology allows free wireless connections
between all Bluetooth-compliant devices within a
range of 10 metres. Since the devices communicate
using radio waves, they do not need to be in line of
sight to each other.
• If there are obstacles between the devices, the
operating distance may be reduced.
• It is recommended that you do not use the
Bluetooth feature while using multimedia
features, such as voice recorder, camera, and
music player, or vice versa, for better
performance.
• Some devices may not be compatible with your
phone.
86
Searching for and pairing with a Bluetooth
device
1. From the Bluetooth menu, select My devices.
2. Select Search for new devices.
After searching, a list of devices to which you can
connect displays. The following icons indicate the
type of device:
Stereo headset
•
Printer
•
Computer
•
PDA
•
Mobile phone
•
Unknown device
•
Mono headset/Hands-free car kit
Using device options
From the device list, press  to access the
following options:
• Connect: connect to a headset or hands-free car
kit.
• Disconnect: end the connection with the
connected device.
• Browser files: search for data from the device
and import data directly to your phone.
• Service list: access the Bluetooth service list of
the device.
• Rename: rename the paired device.
• Authorise device/Unauthorise device:
determine whether or not the phone asks you to
permit connection when other devices try to
connect to your phone.
Settings (Menu 9)
The colour of the icon indicates the status of the
the device:
• Grey for unpaired devices
• Blue for paired devices
• Red for devices that are currently connected to
your phone
3. Select a device.
4. Enter a Bluetooth PIN and press . This code
is used just once and you do not need to memorise
it.
When the owner of the other device enters the
same code, pairing is complete.
Menu functions
•
Some devices, especially headsets or hands-free car
kits, may have a fixed Bluetooth PIN, such as 0000.
If the other device has a code, you must enter it.
87
Menu functions
•
Delete: remove the selected device or all devices
from the list.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item you want
to send is stored.
3. Scroll to the item you want.
4. Press  and select Send via →
Bluetooth → Search for new devices.
The phone searches for devices within range and
displays a list of available devices.
5. Select a device.
6. If necessary, enter the Bluetooth PIN needed for
pairing and press .
Receiving data via Bluetooth
To receive data via Bluetooth, your phone’s Bluetooth
feature must be active and its visibility must be
enabled.
88
1. If an unauthorised Bluetooth device sends data to
your phone, press  to allow the device to
access your phone.
2. Press  to receive data.
Security (Menu 9.8)
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
If you enter an incorrect PIN/PIN2 three times, the
SIM card is blocked. To unblock it you need to enter
your PUK/PUK2 (Personal Unblocking Key). The
codes are supplied by your service provider.
PIN check (Menu 9.8.1)
The 4- to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
SIM lock (Menu 9.8.6)
Use this menu to change your PIN. The PIN check
feature must be enabled to change the PIN.
This menu allows your phone to work only with the
current SIM by assigning a SIM lock code. You must
enter the SIM lock code to use a different SIM card.
Phone lock (Menu 9.8.3)
Use this menu to lock the phone from unauthorised
use.
The password is preset to 00000000. To change the
password, use the Change password menu.
Change password (Menu 9.8.4)
Use this menu to change your phone password.
Fixed dialling mode (Menu 9.8.7)
If supported by your SIM card, Fixed Dialling Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored on
the SIM card.
Change PIN2 code (Menu 9.8.8)
Use this menu to change your current PIN2, if
supported by your SIM card.
Privacy (Menu 9.8.5)
i-mode settings (Menu 9.9)
Use this menu to lock access to messages, files,
i-mode access, or all menu functions on the phone,
except for call functions.
Use this menu to create and customise the i-mode
profiles containing the settings for accessing the
i-mode browser or sending i-mails and i-MMS
messages.
When a privacy option is enabled, you must enter the
phone password to access the locked items or
functions.
Settings (Menu 9)
When this feature is enabled, you must enter a 4- to
8-digit phone password each time the phone is
switched on.
Menu functions
Change PIN code (Menu 9.8.2)
89
Menu functions
Your phone is suited for connecting to the network
by default. If you change the settings without first
checking with your service provider, the i-mode
browser, i-mail, and i-MMS features may not work
properly.
Profile settings (Menu 9.9.1)
You can create an i-mode profile.
1. Press [Left] or [Right] to select a profile.
2. Enter information for the profile.
• Profile name: enter a profile name.
• Proxy host - imode: enter the host of the
proxy server for accessing the i-mode browser.
• Proxy host - streaming: enter the host of the
proxy server for accessing the streaming
server.
• Proxy port - imode: enter the port number of
the proxy server for accessing the i-mode
browser.
• Proxy port - streaming: enter the port
number of the proxy server for accessing the
streaming server.
90
•
SSL port: enter the port number of the SSL
(Secure Sockets Layer) server.
• Portal URL: enter the URL address for the
startup page of the i-mode browser.
• Location server URL: enter the URL address
of the preferred page of the i-mode browser.
• Mail server: enter the URL address of the
i-Mail server.
• MMS server: enter the URL address of the
i-MMS server.
• APN: enter the access point name used for the
address of the GPRS network.
• User ID: enter the user ID.
• User password: enter the password.
3. Press .
Save new content to (Menu 9.9.2)
You can select a default memory location for saving
downloaded files. If you select Always ask, the phone
will ask you to select a memory location each time you
save a file.
Reset settings (Menu 9.10)
Use this menu to reset the phone’s settings you have
changed.
1. Press [Centre] to select the setting categories to
be reset.
2. Press .
3. Press  to confirm the reset.
4. Enter the phone password and press .
The password is preset to 00000000. You can
change this password.p. 89
Solve problems
Help and personal needs
To save the time and expense of an unnecessary service
call, perform the simple checks in this section before
contacting a service professional.
When you switch on your phone, the following
messages may appear:
“Insert SIM”
• Be sure that the SIM card is correctly installed.
“Enter password”
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
“Enter PIN”
• You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu.
91
Solve problems
“Enter PUK”
• The PIN has been entered incorrectly three times,
and the SIM card is now blocked. Enter the PUK
supplied by your service provider.
•
“No service,” “Network failure,” or “Not done”
displays
• The network connection has been lost. You may be
in a weak signal area. Move and try again.
• You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
Your correspondent cannot hear you speaking
• Be sure that you have switched on the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is located
at the bottom of the phone.
You have entered a number but it was not dialled
• Be sure that you have pressed [
].
• Be sure that you have accessed the right cellular
network.
• Be sure that you have not set an outgoing call
barring option.
Your correspondent cannot reach you
• Be sure that your phone is switched on. ([
pressed for more than one second.)
92
•
Be sure that you are accessing the correct cellular
network.
Be sure that you have not set an incoming call
barring option.
The phone starts beeping and “Warning. Low
battery” flashes on the display
• Your battery is insufficiently charged. Recharge the
battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display
). The number of bars indicates the signal
strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to a
window if you are in a building.
E760.book Page 20 Tuesday, May 23, 2006 1:59 PM
Health and safety information
Exposure to radio frequency (RF) signals
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission (FCC) of the
U.S. Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on the
safety standards that were developed by independent
scientific organizations through periodic and through
evaluation of scientific studies.
The standards include a substantial safety margin
designed to assure the safety of all persons, regardless of
age and health.
The exposure standard for wireless phones employs a unit
of measurement known as Specific Absorption Rate (SAR).
The SAR limit recommended by the FCC is 1.6W/kg.*
SAR tests are conducted using standard operating
positions specified by the FCC with the phone transmitting
at its highest certified power level in all tested frequency
94
bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone
while operating can be well below the maximum value.
This is because the phone is designed to operate at
multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output
of the phone.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the limit established by the government
adopted requirement for safe exposure. The tests are
performed in positions and locations (e.g., at the ear and
worn on the body) as required by the FCC for each model.
While there may be differences between the SAR levels of
various phones and at various positions, they all meet the
government requirement.
* In the U.S. and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged
over one gram of tissue. The standard incorporates a
substantial margin of safety to give additional
protection for the public and to account for any
variations in measurements.
E760.book Page 21 Tuesday, May 23, 2006 1:59 PM
For body operation
For body worn operation, this model phone has been
tested and meets the FCC RF exposure guidelines when
used with a Samsung-supplied or approved accessory
designated for this product or when used with and
accessory that contains no metal and that positions the
handset a minimum from the body.
The minimum distance for this model phone is written in
the FCC certification information from the body. None
compliance with the above conditions may violate FCC RF
exposure guidelines.
For more Information concerning exposure to radio
frequency signals, see the following websites:
Federal Communications Commission (FCC)
http://www.fcc.gov
Cellular Telecommunications Industry Association (CTIA):
http://www.wow-com.com
Health and safety information
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of http:/
/www.fcc.gov/oet/fccid after searching on FCC ID printed
in the label on the phone.
U.S.Food and Drug Administration (FDA)
http://www.fda.gov/cdrh/consumer
World Health Organization (WHO)
http://www.who.int/peh-emf/en
Precautions when using batteries
Never use any charger or battery that is damaged in any
way.
Use the battery only for its intended purpose.
If you use the phone near the network’s base station, it
uses less power; talk and standby time are greatly
affected by the signal strength on the cellular network and
the parameters set by the network operator.
Battery charging time depends on the remaining battery
charge, the type of battery and the charger used. The
battery can be charged and discharged hundreds of times,
but it will gradually wear out. When the operation time
95
E760.book Page 22 Tuesday, May 23, 2006 1:59 PM
(talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
If left unused, a fully charged battery will discharge itself
over time.
Use only Samsung-approved batteries and recharge your
battery only with Samsung-approved chargers. When a
charger is not in use, disconnect it from the power source.
Do not leave the battery connected to a charger for more
than a week, since overcharging may shorten its life.
Extreme temperatures will affect the charging capacity of
your battery: it may require cooling or warming first.
Do not leave the battery in hot or cold places, such as in a
car in summer or winter conditions, as you will reduce the
capacity and lifetime of the battery. Always try to keep the
battery at room temperature. A phone with a hot or cold
battery may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly affected
by temperatures below 0 °C (32 °F).
Do not short-circuit the battery. Accidental short-circuiting
can occur when a metallic object (coin, clip or pen) causes
a direct connection between the + and – terminals of the
battery (metal strips on the battery), for example when
96
you carry a spare battery in a pocket or bag. Shortcircuiting the terminals may damage the battery or the
object causing the short-circuiting.
Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of batteries in
a fire.
Road safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a car,
practice good common sense and remember the following
tips:
Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the
road.
When available, use a hands-free device. If possible, add
an extra layer of convenience and safety to your wireless
E760.book Page 23 Tuesday, May 23, 2006 1:59 PM
conversations that have the potential to divert your
attention from the road.
Position your wireless phone within easy reach. Be able to
access your wireless phone without removing your eyes
from the road. If you get an incoming call at an
inconvenient time, let your voice mail answer it for you.
Use your wireless phone to call for help. Dial the
emergency number in the case of fire, traffic accident or
medical emergencies. Remember, it is a free call on your
wireless phone!
Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice, and
even heavy traffic can be hazardous.
Use your wireless phone to help others in emergencies. If
you see a car accident, crime in progress or other serious
emergency where lives are in danger, call the emergency
number, as you would want others to do for you.
Do not take notes or look up phone numbers while driving.
Jotting down a To Do list or flipping through your Address
Book takes your attention away from your primary
responsibility, driving safely.
If you see a broken-down vehicle posing no serious
hazard, a broken traffic signal, a minor traffic accident
where no one appears injured, or a vehicle you know to be
stolen, call roadside assistance or any other special nonemergency wireless number.
Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try
to plan calls when your car will be stationary. If you need
to make a call while moving, dial only a few numbers,
check the road and your mirrors, then continue.
Do not engage in stressful or emotional conversations that
may be distracting. Make the people with whom you are
talking aware that you are driving and suspend
Health and safety information
phone with one of the many hands-free accessories
available today.
Operating environment
Remember to follow any special regulations in force in any
area and always switch off your phone whenever it is
forbidden to use it, or when it may cause interference or
danger.
97
E760.book Page 24 Tuesday, May 23, 2006 1:59 PM
Health and safety information
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
are consistent with the independent research and
recommendations of Wireless Technology Research.
As with other mobile radio transmitting equipment, users
are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is
recommended that the equipment should only be used in
the normal operating position (held to your ear with the
antenna pointing over your shoulder).
should always keep the phone more than 15 cm (6 inches)
from their pacemaker when the phone is switched on.
Electronic devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations
98
Persons with pacemakers:
should not carry the phone in a breast pocket.
should use the ear opposite the pacemaker to minimize
potential interference.
If you have any reason to suspect that interference is
taking place, switch off your phone immediately.
Hearing aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
Other medical devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
E760.book Page 25 Tuesday, May 23, 2006 1:59 PM
information. Switch off your phone in health care facilities
when any regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its representative regarding your
vehicle. You should also consult the manufacturer of any
equipment that has been added to your vehicle. You
should also consult the manufacturer of any equipment
that has been added to your vehicle.
Posted facilities
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include the areas
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas (such as
propane or butane), areas where the air contains
chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
Switch off your phone in any facility where posted notices
require you to do so.
Emergency calls
Potentially explosive environments
Switch off your phone when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Health and safety information
Vehicles
Users are advised to switch off the phone while at a
refueling point (service station). Users are reminded of the
need to observe restrictions on the use of radio equipment
in fuel depots (fuel storage and distribution areas),
chemical plants or where blasting operations are in
progress.
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as userprogrammed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications (medical emergencies, for example).
99
E760.book Page 26 Tuesday, May 23, 2006 1:59 PM
Health and safety information
Remember, to make or receive any calls the phone must
be switched on and in a service area with adequate signal
strength. Emergency calls may not be possible on all
wireless phone networks or when certain network services
and/or phone features are in use. Check with local service
providers.
To make an emergency call:
If the phone is not on, switch it on.
Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
Press
If certain features are in use (call barring, for example),
you may first need to deactivate those features before you
can make an emergency call. Consult this document and
your local cellular service provider.
When making an emergency call, remember to give all the
necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not end the
call until given permission to do so.
100
FCC Notice and Cautions
FCC Notice
• The device complies with Part 15 of the FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
• This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will occur in a
particular installation.
E760.book Page 27 Tuesday, May 23, 2006 1:59 PM
The phone may cause TV or radio interference if used in
close proximity to receiving equipment. The FCC can
require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection
Standard (NFPA-58). For a copy of this standard, contact
the National Fire Protection Association, One Battery
march Park, Quincy, MA 02269, Attn: Publication Sales
Division.
Cautions
Changes or modifications made in the radio phone, not
expressly approved by Samsung, will void the user’s
authority to operate the equipment.
Only use approved batteries, antennas and chargers. The
use of any unauthorized accessories may be dangerous
and void the phone warranty if said accessories cause
damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece
of equipment and can be broken. Avoid dropping, hitting,
bending or sitting on it.
Other important safety information
Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or service
may be dangerous and may invalidate any warranty
applicable to the device.
Health and safety information
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiveing antenna.
- Increase the separation between the equipment
and receiver.
- Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.
Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the
phone, its parts or accessories.
101
E760.book Page 28 Tuesday, May 23, 2006 1:59 PM
Health and safety information
For vehicles equipped with an air bag, remember that an
air bag inflates with great force. Do not place objects,
including both installed or portable wireless equipment in
the area over the air bag or in the air bag deployment
area. If wireless equipment is improperly installed and the
air bag inflates, serious injury could result.
Switch off your phone before boarding an aircraft. The use
of wireless phones in aircraft is illegal and may be
dangerous to the aircraft’s operation.
Failure to observe these instructions may lead to the
suspension or denial of telephone services to the offender,
or legal action, or both.
Keep the phone dry. Precipitation, humidity and liquids
contain minerals that will corrode electronic circuits.
Do not use the phone with a wet hand. Doing so may
cause an electric shock to you or damage to the phone.
Do not use or store the phone in dusty, dirty areas, as its
moving parts may be damaged.
Do not store the phone in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
Care and maintenance
Do not store the phone in cold areas. When the phone
warms up to its normal operating temperature, moisture
can form inside the phone, which may damage the
phone’s electronic circuit boards.
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years:
Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth
slightly dampened in a mild soap-and-water solution.
Keep the phone and all its parts and accessories out of the
reach of small children’s.
102
Do not drop, knock or shake the phone. Rough handling
can break internal circuit boards.
Do not paint the phone. Paint can clog the device’s moving
parts and prevent proper operation.
E760.book Page 29 Tuesday, May 23, 2006 1:59 PM
Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may
explode when overheated.
If the phone, battery, charger or any accessory is not
working properly, take it to your nearest qualified service
facility. The personnel there will assist you, and if
necessary, arrange for service.
Cautions
Modifications not expressly approved by the party
responsible for compliance could void the user's authority
to operate the equipment.
FCC Compliance information
This device complies with Part 15 of FCC Rules. Operation
is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received.
Including interference that may cause undesired
operation.
Health and safety information
Use only the supplied or an approved replacement
antenna. Unauthorized antennas or modified accessories
may damage the phone and violate regulations governing
radio devices.
Acknowledging special precautions
and the FCC and industry canada
notice
Information to user
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
103
E760.book Page 30 Tuesday, May 23, 2006 1:59 PM
Health and safety information
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician
for help.
104
Appendix A: CERTIFICATION
INFORMATION (SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on safety
standards that were developed by independent scientific
organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR limit set by the FCC is 1.6
W/kg. SAR Tests are conducted using standard operating
positions accepted by the FCC with the phone transmitting
at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone
E760.book Page 31 Tuesday, May 23, 2006 1:59 PM
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in
positions and locations (e.g. at the ear and worn on the
body) as required by the FCC.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of http:/
/www.fcc.gov/oet/fccid after searching on FCC ID
A3LGHS501I.
The highest SAR values for this model phone as reported
to the FCC are
Head: 0.774 W/Kg, Body-worn: 0.542 W/Kg.
For body worn operation, this model phone has been
tested and meets the FCC RF exposure guidelines
whenused with a Samsung accessory designated for this
product or when used with an accessory that contains no
metal and that positions the handset a minimum of 1.5 cm
from the body. Non-compliance with the above restrictions
may result in violation of FCC RF exposure guidelines.
Health and safety information
while operating can be well below the maximum value.
This is because the phone is designed to operate at
multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power
output.
In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kilogram (W/kg)
averaged over one gram of tissue. The standard
incorporates a substantial ma gin of safety to give
additional protection for the public and to account for any
variations in measurements.
105
E760.book Page 32 Tuesday, May 23, 2006 1:59 PM
Health and safety information
Appendix B: Guide to safe and
responsible wireless phone use
judgment must be exercised at all times while driving a
motor vehicle whether on the phone or not.
Cellular Telecommunications & Internet Association
“Safety is the most important call you will ever make.”
The basic lessons are ones we all learned as teenagers.
Driving requires alertness, caution and courtesy. It
requires a heavy dose of basic common sense-keep your
head up, keep your eyes on the road, check your mirrors
frequently and watch out for other drivers.
It requires obeying all traffic signs and signals and staying
within the speed limit. It means using seat belts and
requiring other passengers to do the same.
A guide to safe and responsible wireless phone
use
TENS OF MILLIONS OF PEOPLE IN THE U.S. TODAY
TAKE ADVANTAGE OF THE UNIQUE COMBINATION OF
CONVENIENCE, SAFETY AND VALUE DELIVERED BY
THE WIRELESS TELEPHONE. QUITE SIMPLY, THE
WIRELESS PHONE GIVES PEOPLE THE POWERFUL
ABILITY TO COMMUNICATE BY VOICE-ALMOST
ANYWHERE, ANYTIME-WITH THE BOSS, WITH A
CLIENT, WITH THE KIDS, WITH EMERGENCY
PERSONNEL OR EVEN WITH THE POLICE. EACH YEAR,
AMERICANS MAKE BILLIONS OF CALLS FROM THEIR
WIRELESS PHONES, AND THE NUMBERS ARE RAPIDLY
GROWING.
But an important responsibility accompanies those
benefits, one that every wireless phone user must uphold.
When driving a car, driving is your first responsibility. A
wireless phone can be an invaluable tool, but good
106
But with wireless phone use, driving safely means a little
more. This brochure is a call to wireless phone users
everywhere to make safety their first priority when behind
the wheel of a car. Wireless telecommunications is keeping
us in touch, simplifying our lives, protecting us in
emergencies and providing opportunities to help others in
need. When it comes to the use of wireless phones, safety
is your most important call.
E760.book Page 33 Tuesday, May 23, 2006 1:59 PM
Wireless phone “Safety Tips”
Below are safety tips to follow while driving and using a
wireless phone which should be easy to remember:
When available, use a hands free device. A number of
hands free wireless phone accessories are readily available
today. Whether you choose an installed mounted device
for your wireless phone or a speaker phone accessory,
take advantage of these devices if available to you.
Position your wireless phone within easy reach. Make sure
you place your wireless phone within easy reach and
where you can grab it without removing your eyes from
the road. If you get an incoming call at an inconvenient
time, if possible, let your voice mail answer it for you.
Suspend conversations during hazardous driving
conditions or situations. Let the person you are speaking
Do not take notes or look up phone numbers while driving.
If you are reading an address book or business card, or
writing a “to do” list while driving a car, you are not
watching where you are going. It’s common sense. Don’t
get caught in a dangerous situation because you are
reading or writing and not paying attention to the road or
nearby vehicles.
Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try
to plan your calls before you begin your trip or attempt to
coincide your calls with times you may be stopped at a
stop sign, red light or otherwise stationary. But if you need
to dial while driving, follow this simple tip-dial only a few
numbers, check the road and your mirrors, then continue.
Health and safety information
Get to know your wireless phone and its features such as
speed dial and redial. Carefully read your instruction
manual and learn to take advantage of valuable features
most phones offer, including automatic redial and memory.
Also, work to memorize the phone keypad so you can use
the speed dial function without taking your attention off
the road.
with know you are driving; if necessary, suspend the call
in heavy traffic or hazardous weather conditions. Rain,
sleet, snow and ice can be hazardous, but so is heavy
traffic. As a driver, your first responsibility is to pay
attention to the road.
Do not engage in stressful or emotional conversations that
may be distracting. Stressful or emotional conversations
and driving do not mix-they are distracting and even
dangerous when you are behind the wheel of a car. Make
107
E760.book Page 34 Tuesday, May 23, 2006 1:59 PM
Health and safety information
people you are talking with aware you are driving and if
necessary, suspend conversations which have the
potential to divert your attention from the road.
traffic accident where no one appears injured or a vehicle
you know to be stolen, call roadside assistance or other
special non-emergency wireless number.
Use your wireless phone to call for help. Your wireless
phone is one of the greatest tools you can own to protect
yourself and your family in dangerous situations-with your
phone at your side, help is only three numbers away. Dial
9-1-1 or other local emergency number in the case of fire,
traffic accident, road hazard or medical emergency.
Remember, it is a free call on your wireless phone!
Careless, distracted individuals and people driving
irresponsibly represent a hazard to everyone on the road.
Since 1984, the Cellular Telecommunications Industry
Association and the wireless industry have conducted
educational outreach to inform wireless phone users of
their responsibilities as safe drivers and good citizens. As
we approach a new century, more and more of us will take
advantage of the benefits of wireless telephones.
And, as we take to the roads, we all have a responsibility
to drive safely.
Use your wireless phone to help others in emergencies.
Your wireless phone provides you a perfect opportunity to
be a “Good Samaritan” in your community. If you see an
auto accident, crime in progress or other serious
emergency where lives are in danger, call 9-1-1 or other
local emergency number, as you would want others to do
for you.
Call roadside assistance or a special wireless non
emergency assistance number when necessary. Certain
situations you encounter while driving may require
attention, but are not urgent enough to merit a call for
emergency services. But you still can use your wireless
phone to lend a hand. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal, a minor
108
“The wireless industry reminds you to use your phone
safely when driving.”
Cellular Telecommunications & Internet Association For
more information, please call 1-888-901-SAFE.
For updates: http://www.wow-com.com/consumer/issues/
driving/articles.cfm?ID =85
E760.book Page 35 Tuesday, May 23, 2006 1:59 PM
Appendix C: consumer update
on wireless phones
U.S. Food and Drug Administration
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called cell, mobile, or
PCS phones. These types of wireless phones can expose
the user to measurable radio frequency energy (RF)
because of the short distance between the phone and the
user s head. These RF exposures are limited by Federal
Communications Commission safety guidelines that were
developed with the advice of FDA and other federal health
and safety agencies. When the phone is located at greater
distances from the user, the exposure to RF is drastically
lower because a person’s RF exposure decreases rapidly
with increasing distance from the source. The so-called
“cordless phones,” which have a base unit connected to
the telephone wiring in a house, typically operate at far
lower power levels, and thus produce RF exposures well
within the FCC’s compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any
health problems are associated with using wireless
What is FDA’s role concerning the safety of wireless
phones?
Health and safety information
What kinds of phones are the subject of this update?
phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of
radio frequency energy (RF) in the microwave range while
being used. They also emit very low levels of RF when in
the stand-by mode. Whereas high levels of RF can produce
health effects (by heating tissue), exposure to low level RF
that does not produce heating effects causes no known
adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some
studies have suggested that some biological effects may
occur, but such findings have not been confirmed by
additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
Under the law, FDA does not review the safety of radiation
emitting consumer products such as wireless phones
before they can be sold, as it does with new drugs or
medical devices. However, the agency has authority to
take action if wireless phones are shown to emit radio
frequency energy (RF) at a level that is hazardous to the
user. In such a case, FDA could require the manufacturers
of wireless phones to notify users of the health hazard and
109
E760.book Page 36 Tuesday, May 23, 2006 1:59 PM
Health and safety information
to repair, replace or recall the phones so that the hazard
no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
Support needed research into possible biological effects of
RF of the type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device
function; and
Cooperate in providing users of wireless phones with the
best possible information on possible effects of wireless
phone use on human health
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
National Institute for Occupational Safety and Health
Environmental Protection Agency Federal Communications
Commission
110
Occupational Safety and Health Administration
National Telecommunications and Information
Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless phones
with the Federal Communications Commission (FCC). All
phones that are sold in the United States must comply
with FCC safety guidelines that limit RF exposure. FCC
relies on FDA and other health agencies for safety
questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than
those they can get from wireless phones. Base stations
are thus not the primary subject of the safety questions
discussed in this document.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
E760.book Page 37 Tuesday, May 23, 2006 1:59 PM
FDA has been a leading participant in the World Health
Organization International Electromagnetic Fields (EMF)
Project since its inception in 1996. An influential result of
this work has been the development of a detailed agenda
of research needs that has driven the establishment of
new research programs around the world. The Project has
also helped develop a series of public information
documents on EMF issues.
FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research
and Development Agreement (CRADA) to do research on
wireless phone safety. FDA provides the scientific
oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone users.
The CRADA will also include a broad assessment of
additional research needs in the context of the latest
research developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products—and at this point we
do not know that there is—it is probably very small. But if
you are concerned about avoiding even potential risks,
you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is a
key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone
will reduce RF exposure.
If you must conduct extended conversations by wireless
phone every day, you could place more distance between
your body and the source of the RF, since the exposure
level drops off dramatically with distance. For example,
you could use a headset and carry the wireless phone
away from your body or use a wireless phone connected to
a remote antenna
Health and safety information
FDA is working with the U.S. National Toxicology Program
and with groups of investigators around the world to
ensure that high priority animal studies are conducted to
address important questions about the effects of exposure
to radio frequency energy (RF).
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like
111
E760.book Page 38 Tuesday, May 23, 2006 1:59 PM
Health and safety information
those described above to reduce your RF exposure from
wireless phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you
want to take steps to lower exposure to radio frequency
energy (RF), the measures described above would apply
to children and teenagers using wireless phones. Reducing
the time of wireless phone use and increasing the distance
between the user and the RF source will reduce RF
exposure.
Some groups sponsored by other national governments
have advised that children be discouraged from using
wireless phones at all. For example, the government in the
United Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly precautionary;
it was not based on scientific evidence that any health
hazard exists.
Do hands-free kits for wireless phones reduce risks from
exposure to RF emissions?
112
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free kits
can be used with wireless phones for convenience and
comfort. These systems reduce the absorption of RF
energy in the head because the phone, which is the source
of the RF emissions, will not be placed against the head.
On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part
of the body will absorb more RF energy. Wireless phones
marketed in the U.S. are required to meet safety
requirements regardless of whether they are used against
the head or against the body. Either configuration should
result in compliance with the safety limit.
Do wireless phone accessories that claim to shield the
head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that accessories that claim to shield the head from
those emissions reduce risks. Some products that claim to
shield the user from RF absorption use special phone
cases, while others involve nothing more than a metallic
accessory attached to the phone. Studies have shown that
these products generally do not work as advertised. Unlike
E760.book Page 39 Tuesday, May 23, 2006 1:59 PM
FDA has tested hearing aids for interference from
handheld wireless phones and helped develop a voluntary
standard sponsored by the Institute of Electrical and
Electronic Engineers (IEEE). This standard specifies test
methods and performance requirements for hearing aids
and wireless phones so that no interference occurs when a
person uses a compatible phone and a compatible hearing
aid at the same time. This standard was approved by the
IEEE in 2000.
What about wireless phone interference with medical
equipment?
FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmful interference be found to occur, FDA will conduct
testing to assess the interference and work to resolve the
problem.
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason, FDA
helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones.
This test method is now part of a standard sponsored by
the Association for the Advancement of Medical
instrumentation (AAMI). The final draft, a joint effort by
FDA, medical device manufacturers, and many other
groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers
and defibrillators are safe from wireless phone EMI.
What are the results of the research done already?
Health and safety information
“hand-free” kits, these so-called “shields” may interfere
with proper operation of the phone. The phone may be
forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal
trade Commission (FTC) charged two companies that sold
devices that claimed to protect wireless phone users from
radiation with making false and unsubstantiated claims.
According to FTC, these defendants lacked a reasonable
basis to substantiate their claim.
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in their
research methods. Animal experiments investigating the
effects of radio frequency energy (RF) exposures
characteristic of wireless phones have yielded conflicting
results that often cannot be repeated in other laboratories.
A few animal studies, however, have suggested that low
levels of RF could accelerate the development of cancer in
laboratory animals. However, many of the studies that
113
E760.book Page 40 Tuesday, May 23, 2006 1:59 PM
Health and safety information
showed increased tumor development used animals that
had been genetically engineered or treated with cancer
causing chemicals so as to be pre-disposed to develop
cancer in the absence of RF exposure. Other studies
exposed the animals to RF for up to 22 hours per day.
These conditions are not similar to the conditions under
which people use wireless phones, so we don t know with
certainty what the results of such studies mean for human
health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use of
wireless phones and primary brain cancer, gioma,
meningioma, or acoustic neuroma, tumors of the brain or
salivary gland, leukemia, or other cancers. None of the
studies demonstrated the existence of any harmful health
effects from wireless phone RF exposures. However, none
of the studies can answer questions about long-term
exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
114
A combination of laboratory studies and epidemiological
studies of people actually using wireless phones would
provide some of the data that are needed. Lifetime animal
exposure studies could be completed in a few years.
However, very large numbers of animals would be needed
to provide reliable proof of a cancer promoting effect if
one exists. Epidemiological studies can provide data that
is directly applicable to human populations, but 10 or
more years follow-up may be needed to provide answers
about some health effects, such as cancer. This is because
the interval between the time of exposure to a cancercausing agent and the time tumors develop - if they do may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in
measuring actual RF exposure during day-to-day use of
wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which
model of phone is used.
Which other federal agencies have responsibilities related
to potential RF health effects?
Additional information on the safety of RF exposures from
various sources can be obtained from the following
organizations.
E760.book Page 41 Tuesday, May 23, 2006 1:59 PM
FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
National Institute for Occupational Safety and Health
(NIOSH):
http://www.cdc.gov/niosh/emfpg.html
World health Organization (WHO):
http://www.who.int/peh-emf/
International Commission on Non-Ionizing Radiation
Protection:
http://www.icnirp.de
National Radiation Protection Board (UK):
http://www.nrpb.org.uk
Updated 4/3/2002: US Food and Drug Administration
http://www.fda.gov/cellphones
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P. (SAMSUNG)
warrants to the original purchaser ("Purchaser") that
SAMSUNG’s Phones and accessories ("Products") are
free from defects in material and workmanship under
normal use and service for the period commencing
upon the date of purchase and continuing for the
following specified period of time after that date:
Phone 1 Year
Batteries 1 Year
Leather Case/Pouch 90 Days
Other Phone Accessories 1 Year
What is Not Covered? This Limited Warranty is
conditioned upon proper use of Product by Purchaser.
This Limited Warranty does not cover: (a) defects or
damage resulting from accident, misuse, abuse,
neglect, unusual physical, electrical or
electromechanical stress, or modification of any part
of Product, including antenna, or cosmetic damage;
(b) equipment that has the serial number removed or
made illegible; (c) any plastic surfaces or other
Health and safety information
Occupational Safety and Health Administration’s (OSHA):
http://www.osha-slc.gov/SLTC/radiofrequencyradiation/
index.html
STANDARD LIMITED WARRANTY
115
E760.book Page 42 Tuesday, May 23, 2006 1:59 PM
Health and safety information
externally exposed parts that are scratched or
damaged due to normal use; (d) malfunctions
resulting from the use of Product in conjunction with
accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG;
(e) defects or damage from improper testing,
operation, maintenance, installation, or adjustment;
(f) installation, maintenance, and service of Product,
or (g) Product used or purchased outside the United
States or Canada.
This Limited Warranty covers batteries only if battery
capacity falls below 80% of rated capacity or the
battery leaks, and this Limited Warranty does not
cover any battery if (i) the battery has been charged
by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the
seals on the battery are broken or show evidence of
tampering, or (iii) the battery has been used in
equipment other than the SAMSUNG phone for which
it is specified.
What are SAMSUNG’s Obligations? During the
applicable warranty period, SAMSUNG will repair or
replace, at SAMSUNG’s sole option, without charge to
116
Purchaser, any defective component part of Product.
To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone
service facility in an adequate container for shipping,
accompanied by Purchaser’s sales receipt or
comparable substitute proof of sale showing the date
of purchase, the serial number of Product and the
sellers’ name and address. To obtain assistance on
where to deliver the Product, call Samsung Customer
Care at 1-888-987-4357. Upon receipt, SAMSUNG will
promptly repair or replace the defective Product.
SAMSUNG may, at SAMSUNG’s sole option, use
rebuilt, reconditioned, or new parts or components
when repairing any Product or replace Product with a
rebuilt, reconditioned or new Product. Repaired/
replaced leather cases and pouches will be warranted
for a period of ninety (90) days. All other repaired/
replaced Product will be warranted for a period equal
to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is
longer. All replaced parts, components, boards and
equipment shall become the property of SAMSUNG.
If SAMSUNG determines that any Product is not
covered by this Limited Warranty, Purchaser must pay
E760.book Page 43 Tuesday, May 23, 2006 1:59 PM
all parts, shipping, and labor charges for the repair or
return of such Product.
THE MERCHANTABILITY OF THE PRODUCT OR ITS
FITNESS FOR ANY PARTICULAR PURPOSE OR USE;
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF
THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE
COMPONENTS CONTAINED THEREIN; OR
COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION
OR CONTRACT PERTAINING THERETO.
Health and safety information
What Are the Limits On SAMSUNG’s Liability?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT “AS IS,” AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, OF ANY KIND WHATSOEVER WITH
RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO:
NOTHING CONTAINED IN THE INSTRUCTION MANUAL
SHALL BE CONSTRUED TO CREATE AN EXPRESS
WARRANTY OF ANY KIND WHATSOEVER WITH
RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY
OPERATION OF LAW, INCLUDING IF APPLICABLE THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
LIMITED TO THE SAME DURATION OF TIME AS THE
EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE, USE, OR MISUSE OF, OR
INABILITY TO USE THE PRODUCT OR ARISING
DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS
OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL,
SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES,
OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR
FOR DAMAGES ARISING FROM ANY TORT (INCLUDING
NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT
COMMITTED BY SAMSUNG, ITS AGENTS OR
117
E760.book Page 44 Tuesday, May 23, 2006 1:59 PM
Health and safety information
EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR
FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY
ANY OTHER PARTY. SOME STATES/PROVINCES DO
NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS,
WHICH VARY FROM STATE TO STATE/PROVINCE TO
PROVINCE. THIS LIMITED WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL
PURCHASER OF THIS PRODUCT AND STATES
PURCHASER’S EXCLUSIVE REMEDY. IF ANY PORTION
OF THIS LIMITED WARRANTY IS HELD ILLEGAL OR
UNENFORCEABLE BY REASON OF ANY LAW, SUCH
PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL
NOT AFFECT THE ENFORCEABILITY FOR THE
REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS
BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS
LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE PURCHASER
MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT IN
118
CONJUNCTION WITH THE PRODUCT. SAMSUNG
MAKES NO WARRANTIES OR REPRESENTATIONS AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, AS TO THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE OR
SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR
EQUIPMENT, WHETHER SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE
PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE
ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT.
THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY
WITH THE PURCHASER AND THE DIRECT VENDOR,
OWNER OR SUPPLIER OF SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG’s
Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited
Warranty. The agents, employees, distributors, and
dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make
E760.book Page 45 Tuesday, May 23, 2006 1:59 PM
Samsung Telecommunications America (STA), Inc.
1301 East Lookout Drive
Richardson, TX 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
Health and safety information
additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer
advertising or presentation, whether oral or written,
do not constitute warranties by SAMSUNG and should
not be relied upon.
©2005 Samsung Telecommunications America. All
rights reserved.
No reproduction in whole or in part allowed without
prior written approval.
Specifications and availability subject to change
without notice. [080802]
119
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Modify Date                     : 2006:06:14 14:12:11-04:00
Create Date                     : 2006:06:14 14:12:06-04:00
Metadata Date                   : 2006:06:14 14:12:11-04:00
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:a54e7644-fced-4162-b263-339777f5ac37
Instance ID                     : uuid:687e22cc-496c-454b-8f03-40296f8e4aea
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Has XFA                         : No
Page Count                      : 121
EXIF Metadata provided by EXIF.tools
FCC ID Filing: A3LSGHS501I

Navigation menu