Samsung Electronics Co SGHZ310 Single-Band PCS GSM/ EDGE Phone with Bluetooth User Manual Z110VEng4Vodafone

Samsung Electronics Co Ltd Single-Band PCS GSM/ EDGE Phone with Bluetooth Z110VEng4Vodafone

UserManual.wiki >

Samsung Electronics Co >

SGHZ310 User Manual

Users Manual

* Depending on the software installed or your service provider or country, some of the descriptions in this manual may not match your phone exactly.* Depending on your country, your phone and accessories may appear different from the illustrations in this manual.World Wide Webhttp://www.samsungmobile.comPrinted in KoreaCode No.:GH68-00000AEnglish. 10/2005. Drf. 1.0

SGH-Z310User’s Manual

ImportantsafetyprecautionsFailure to comply with the following precautions may be dangerous or illegal.Use road safety at all timesDo not use a hand-held phone while driving. Park the vehicle first. Switch off the phone when refuellingDo not use the phone at a refuelling point (service station) or near fuels or chemicals.Switch off in an aircraftWireless phones can cause interference. Using them in an aircraft is both illegal and dangerous.Switch off the phone near all medical equipmentHospitals or health care facilities may be using equipment that could be sensitive to external radio frequency energy. Follow any regulations or rules in force.InterferenceAll wireless phones may be subject to interference, which could affect their performance.

1Important safety precautionsBe aware of special regulationsMeet any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger.Water resistanceYour phone is not water-resistant. Keep it dry. Sensible useUse only in the normal position (held to the ear). Avoid unnecessary contact with the antenna when the phone is switched on.Emergency callsKey in the emergency number for your present location, then press . Keep your phone away from small children Keep the phone and all its parts, including accessories, out of the reach of small children.Accessories and batteriesUse only Samsung-approved accessories and batteries. Use of any unauthorised accessories could damage your phone and may be dangerous.Qualified serviceOnly qualified service personnel may repair your phone.For more detailed safety information, see "Health and safety information" on page 78.• The phone could explode if the battery is replaced with an incorrect type.• Dispose of used batteries according to the manufacturer’s instructions.

2About this GuideThis User’s Guide provides you with condensed information about how to use your phone. To quickly learn the basics for your phone, please refer to “Get started” and “Step outside the phone.”In this guide, the following instruction icons appear:Indicates that you need to pay careful attention to the subsequent information regarding safety or phone features.Indicates that you can get more information on the referenced page. →Indicates that you need to press the Navigation keys to scroll to the specified option and then select it.[ ] Indicates a key on the phone. For example, [OK]< > Indicates a soft key, whose function is displayed on the phone screen. For example, <Msg.>•3GYour phone is capable of operating in a 3G environment, allowing much greater data transfer speed, video streaming, and video conferencing. Special features of your phone• Camera and camcorderUse the camera module on your phone to take a photo or record a video.•Media playerPlay media files on your phone. You can enjoy high quality videos and music.•IrDASend and receive Phonebook and Oganiser data and media files via an infrared port.

4ContentsUnpack 6Make sure you have each itemYour phone 6Buttons, features, and locationsGet started 7First steps to operating your phoneInstall and charge the phone .............................. 7Power on or off................................................. 8Keys and display............................................... 9Access menu functions...................................... 11Customise your phone ...................................... 12Make/Answer calls............................................ 14Step outside the phone 14Begin with your camera, Media player, games, WAP, and other special featuresUse camera..................................................... 14Play media files ............................................... 15Play games ..................................................... 16Browse the web............................................... 17Use Contacts ................................................... 17Send messages................................................ 18View messages................................................ 20Use Bluetooth wireless...................................... 20Enter text 22ABC, T9, Number, and Symbol modeCall functions 24Advanced calling featuresMenu functions 28All menu options listedSolve problems 77Help and personal needsHealth and safety information 79Index 93

51 Call logp. 281 Missed calls2 Dialled calls3 Received calls4 Current contacts5 Delete all6 Data calls7 Calls cost*8 Calls timep. 28p. 29p. 29p. 29p. 29p. 29p. 29p. 302 Contactsp. 301 Search contact2 New contact3 Groups4 Speed dial5 My name card6 Copy all7 Own number8 Service number*9 Settings0 Memory statusp. 30p. 31p. 32p. 32p. 33p. 33p. 33p. 33p. 34p. 343 Applicationsp. 341 SAT*2 Medial player3 Voice memo4 World clock5 Calculator6 Converterp. 34p. 34p. 36p. 37p. 38p. 384 Internetp. 391 Go to homepage2 Enter URL3 Favorites4 History5 Browser settings6 Network settingsp. 39p. 40p. 40p. 40p. 40p. 405 Messagesp. 411 Create new2 Inbox3 Drafts4 Outbox5 Sent box6 Email inbox7 Media album**8 Templates9 Broadcast0 Delete all Settings Memory statusp. 41p. 43p. 45p. 45p. 45p. 46p. 47p. 47p. 47p. 48p. 48p. 516 File managerp. 52ImagesVideosMusicSoundsGames & MoreOther filesMemory card***p. 52p. 53p. 55p. 56p. 56p. 57p. 587 Organiserp. 581 Alarm2 Calendar3 Week view4 Today’s events5 Schedule6 Anniversary7 Task8 Memo9 Missed event alarm0 Memory statusp. 58p. 59p. 61p. 61p. 61p. 61p. 61p. 61p. 61p. 618 Camerap. 629 Settingsp. 661 Profiles2 Time & date3 Phone4 Display5 Call6 Connectivity7 Application settings8 Security9 Memory status0 Reset settingsp. 66p. 67p. 67p. 68p. 69p. 71p. 74p. 75p. 76p. 76* Shows only if supported by your USIM/SIM card.** Shows only if supported by your service provider.*** Shows only if a memory card is inserted into the phone.Overview of menu functionsTo access Menu mode, press [OK] in Idle mode.

6UnpackMake sure you have each itemYou can obtain various accessories from your local Samsung dealer.Phone Travel ChargerBattery PC Data CablePC Link CD User’s ManualThe items supplied with your phone and the accessories at your Samsung dealer may vary, depending on your country or service provider.Your phoneButtons, features, and locationsMicrophoneHeadset jackNavigation keysDial keyEarpieceDisplayVolume keysInterior camera lens Camera keyMemory card slotLeft soft keyApplicationswitch keyMenu access/confirm keyDelete keyAlphanumeric keysExternal displayInfrared portSpecialfunction keysRight soft keyVideo call keyPower On/Off/Menu exit keyExterior camera lens

7Get startedFirst steps to operating your phoneUSIM/SIM card informationWhen you subscribe to a cellular network, you receive a plug-in SIM (Subscriber Identity Module) card loaded with your subscription details, such as your PIN and available optional services. For 3G services, you can purchase a USIM (Universal Subscriber Identity Module) card.Install and charge the phone Remove the battery.If the phone is already on, first turn it off by holding [ ]. Insert the USIM/SIM card.Make sure that the gold-coloured contacts on the card face down into the phone.1 2 Install the battery. Plug the travel charger into the phone. Plug the charger into a standard AC wall outlet.The LED on the charger indicates the charging progress.• Red: the battery is being charged.• Green: the battery is completely charged.• Orange: the battery is not correctly installed or is operating at a too high or too low temperature. When the phone is completely charged (green charger LED), unplug the charger from the power outlet.3 456

Get started8Low battery indicatorWhen the battery is low:• a warning tone sounds,• the battery low message displays, and• the empty battery icon blinks.If the battery level becomes too low, the phone automatically turns off. Recharge your battery. Power on or off Remove the charger from the phone.7Power onDo not turn on the phone when mobile phone use is prohibited.1. Open the phone.2. Press and hold [ ] to turn on the phone.3. If necessary, enter the PIN and press <Confirm>.Power off1. Open the phone.2. Press and hold [ ].

Get started10DisplayLayoutThe display has three areas.IconsReceived signal strengthAccessing services in a 2.5G network; when transferring data, this icon animatesAccessing services in a 3G network; when transferring data, this icon animatesActive roaming featureVoice call in progressOut of your service area; you cannot send or receive voice callsVideo call in progressText and graphicsdisplays messages, instructions, and information you enter.Soft key function indicatorsshows the current functions assigned to the two soft keys.Iconsdisplays various icons.Select BackIcons (continued)Out of your service area; you cannot send or receive video callsBluetooth feature is active; when transferring data, this icon blinks red and bluep. 71 Connected with a Bluetooth headset or hands-free kitIrDA port is activep. 72Memory card insertedConnected with a computer via a USB portBrowsing the Internet on a PC using the phone as a modemConnected to a secured web pageNew message; depending on the message type, the following icons may appear.•: SMS• : MMS or MMS with attachments•: E-mail•: Voicemail•: WAP push• : Configuration message

11Get started Access menu functionsIcons (continued)Inbox full; depending on the message type, the following icons may appear.•: SMS• : MMS or MMS with attachments•: E-mail•: Voicemail•: WAP push• : Configuration messageProfile settingp. 67•: Normal• : Meeting•: Car•: Silent• : OutdoorBattery power levelUse the soft keysThe roles of the soft keys vary depending on the function you are using. The bottom line of the display indicates their current role.In each main menu, one of the most popular sub menu is assigned to the left soft key. This allows you to quickly access the most popular menus.Press the left soft key to confirm the function displayed or option highlighted.Press the right soft key to move up one level.Select Back

Step outside the phone14Make/Answer callsStep outside the phoneBegin with your camera, Media player, games, WAP, and other special featuresUse cameraTo make a voice call:1. Enter an area code and phone number.2. Press [ ].3. To end the call, press [ ].To make a video call:1. Enter an area code and phone number.2. Press [ ], and the other person appears on the screen.1. When the phone is ringing, press [ ].2. For a video call, press <Show me> to allow the other person to see you.3. To end the call, press [ ].Press [ / ].Make a callAnswer a callAdjust the volume during a call1. In Idle mode, press and hold [ ] to turn on the camera.2. Press [ ] to switch between the interior lens and exterior lens.3. Aim the camera lens at the subject and adjust the image.4. Press [OK] to take a photo. The photo is saved automatically.5. Press [OK] to take another photo.1. In Idle mode, press [OK] and select File manager → Images.2. Select the photo you want.Take a photoView a photo

15Step outside the phone Play media files1. In Idle mode, press and hold [ ] to turn on the camera.2. Press [1] to switch to Record mode.3. Press [ ] to switch between the interior lens and exterior lens.4. Press [OK] to start recording.5. Press [OK] to stop recording. The video is automatically saved.6. Press [OK] to record another video.1. In Idle mode, press [OK] and select File manager → Videos.2. Select the video you want.Record a videoPlay a videoUse these methods:• Download from the wireless webp. 39• Download from a computer using Samsung PC Studio Samsung PC Studio User’s Guide• Copy files to a memory card and insert the card into the phone.• Receive via IrDA or Bluetoothp. 72, p. 711. In Idle mode, press [ ].2. Press <Options> and select Open play list.3. Press <Options> and select Add → Folder or Files.4. Press [OK] to check the files you want or scroll to the folder you want.5. Press <Add> or <Select>.6. Press [OK] to start playing the files.Copy media files to the phoneCreate a play list

Step outside the phone16Play games1. From the Media player screen, press [OK].2. Press [OK] to start playing.3. During playback, use the following keys:•OK: Pauses or resumes playback.• Up: Opens the play list.• Left: Goes to the previous file. Moves backward in a file when held down.• Right: Skips to the next file. Skips forward in a file when held down.• / : Adjusts the volume.• Down: Stops playback.Play media files1. In Idle mode, press [OK] and select File manager → Games & More → the game you want.2. Press any key, except for [ ], to launch the game.1. Select PLAY.2. Select a character.3. Press <OK> to start a game.4. Press [Up] to make the character move forward.5. Press the Navigation keys to change the direction.1. Select START GAME.2. Select New Game.3. Press <SKIP>, then <OK>.4. Press [Up] to make the machine move forward.5. Press the Navigation keys to change the direction.Select a gamePlay PowerinlinexPlay TheLastAge

17Step outside the phone Browse the webUsing a built-in WAP (Wireless Application Protocol) browser, you can get easy access to the wireless web to receive a variety of up-to-date information and services and to enjoy downloads of web contents.Use ContactsIn Idle mode, press [OK] and select Internet → Go to homepage.• To scroll through browser items, press [Up] or [Down].• To select an item, press [OK].• To return to the previous page, press <Back>.• To use browser options, press <Options>.Launch the browserNavigate the webTo the phone’s memory:1. In Idle mode, enter a phone number.2. Press <Options> and select Save to Contacts → Phone → New → a number type.3. Specify the contact information: First name, Last name, Work email, Home email, Group, Homepage, Birthday, and More information (Job title, Department, Company, Nickname, and Notes).4. Press <Options> and select Save to save the entry.To the USIM/SIM card:1. In Idle mode, enter a phone number.2. Press <Options> and select Save to Contacts → SIM → New.Add an entry

Step outside the phone18Send messages3. Specify the contact information, depending on your card type: Name, Email, Group, and Location number.4. Press <Save> to save the entry.1. In Idle mode, press <Contacts>.2. Select an entry.3. Select a number and press [] to dial, or [OK] to edit the contact information.1. In Idle mode, press [OK] and select Contacts → My name card.2. Specify your contact information.3. Press <Options> and select Save to save the name card.4. To send the name card to other people, access the My name card menu again. 5. Press <Options> and select Send name card → the sending method you want.Find an entryCreate and send your name card1. In Idle mode, press <Msg.> and select Create new → Text message.2. Enter the message text.3. Press [OK].4. Enter destination numbers.5. Press [OK] to send the message.1. In Idle mode, press <Msg.> and select Create new → Multimedia message.2. Enter the message subject.3. Select Text.4. Enter the message text and press [OK].5. Select Picture or video or Audio.6. Add a media file.7. Press [OK].8. Enter destination numbers or e-mail addresses.9. Press [OK] to send the message.Send a text message (SMS)Send a multimedia message (MMS)

19Step outside the phone 1. In Idle mode, press <Msg.> and select Create new → File messenger.2. Enter the message subject.3. Move to the Message field.4. Enter the message text.5. Move to the Attach files line.6. Press <Options> and select Add files, Add name card, or Add v-calendar.7. Select images, videos, sounds, name cards, schedule items, or tasks.8. Press <Options> and select Attach.9. Press [OK].10.Enter destination numbers or e-mail addresses.11.Press [OK] to send the message.Send flies by MMS1. In Idle mode, press <Msg.> and select Create new → Email.2. Enter the e-mail subject.3. Move to the Message field.4. Enter the e-mail text.5. Move to the Attach files line.6. Press <Options> and select Add files, Add name card, or Add v-calendar.7. Select images, videos, sounds, name cards, schedule items, or tasks.8. Press <Options> and select Attach.9. Press [OK].10.Enter e-mail addresses.11.Press [OK] to send the e-mail.Send an e-mail

Step outside the phone20View messagesUse Bluetooth wirelessYour phone is equipped with Bluetooth technology which enables you to connect the phone wirelessly to other Bluetooth devices and exchange data with them, talk hands-free, or control the phone remotely.When a notification appears:1. Press <View>.2. Select the message from the Inbox.From the Inbox:1. In Idle mode, press <Msg.> and select Inbox.2. Select an SMS message ().When a notification appears:1. Press <View>.2. Press <Options> and select Retrieve. 3. Select the message from the Inbox.From the Inbox:1. In Idle mode, press <Msg.> and select Inbox.2. Select an MMS message ().View text messageView a multimedia message1. In Idle mode, press <Msg.> and select Email inbox.2. Press <Options> and select Download.3. Select an e-mail or header.4. If you selected a header, press <Options> and select Retrieve.In Idle mode, press [OK] and select Settings → Connectivity → Bluetooth → Activation → On.1. In Idle mode, press [OK] and select Settings → Connectivity → Bluetooth → My devices → Search new device.2. Select a device.View an e-mailTurn on BluetoothSearch for and pair with a Bluetooth device

21Step outside the phone 3. Enter a Bluetooth PIN code or the other device’s Bluetooth PIN code, if it has, and press <OK>.When the owner of the other device enters the same code, the pairing is complete.1. Access an application, Contacts, File manager, or Organiser.2. Select the item you want to send.3. Press <Options> and select Send (name card/schedule/task) → Via bluetooth. 4. Select a device.5. If necessary, enter the Bluetooth PIN and press <OK>.To receive data via Bluetooth, your phone’s Bluetooth feature must be active.If necessary, press <Yes> to confirm the reception.Send dataReceive data

22Enter textABC, T9, Number, and Symbol modeYou can enter text for some features such as Messages, Phonebook, or Organiser, using ABC mode, T9 mode, Number mode, and Symbol mode.Changing the text input modeThe text input mode indicator displays when the cursor is in a text input field.• Press and hold [ ] to switch between T9 ( ) and ABC ( ) modes.• Press [ ] to change case ( / / ) or to switch to Number mode ( ).• Press and hold [ ] to switch to Symbol mode ().Using T9 modeT9 is a predictive text input mode that allows you to key in any character using single keystrokes.Entering a word in T9 mode1. Press [2] to [9] to start entering a word. Press each key once for each letter. For example, press [4], [3], [5], [5], and [6] to enter Hello in T9 mode. T9 predicts the word that you are typing, and it may change with each key that you press.2. Enter the whole word before editing or deleting characters.3. When the word displays correctly, go to step 4. Otherwise, press [0] to display alternative word choices for the keys that you have pressed. For example, Of and Me use [6] and [3].4. Press [ ] to insert a space and enter the next word.Tips for using T9 mode• Press [1] to enter periods or apostrophes automatically.• Press the Navigation keys to move the cursor. • Press [C] to delete characters one by one. Press and hold [C] to clear the entire display.Adding a new word to the T9 dictionaryThis feature may not be available for some languages.1. Enter the word that you want to add.2. Press [0] to display alternative words for your key presses. When there are no more alternative words, Spell displays on the bottom line. 3. Press <Spell>.4. Enter the word you want using ABC mode and press <Add>.

23Enter text Using ABC modePress the appropriate key until the character you want appears on the screen.Tips for using ABC mode• To enter the same letter twice or to enter a different letter on the same key, wait for the cursor to move to the right automatically or press [Right]. Then, enter the next letter.• Press [ ] to insert a space.• Press the Navigation keys to move the cursor. •Press [C] to delete characters one by one. Press and hold [C] to clear the entire display.Using Number modeNumber mode enables you to enter numbers. Press the keys corresponding to the digits you want.Using Symbol modeSymbol mode enables you to insert symbols.Upper case Lower caseKey Characters in order displayedTo Pressdisplay more symbols [Up] or [Down]. select a symbol the corresponding number key.clear the symbol(s) [C]. insert the symbol(s) <OK>.

24Call functionsAdvanced calling featuresMaking a call1. In Idle mode, enter the area code and phone number.2. Press [ ].Making an international call1. In Idle mode, press and hold [0]. The + character appears.2. Enter the country code, area code, and phone number, then press [ ].Redialling recent numbers1. In Idle mode, press [ ] to display the list of recent numbers.2. Scroll to the number you want and press [ ].Making a call from ContactsOnce you have stored a number in Phonebook, you can dial the number by selecting it from Phonebook.p. 30You can also use the speed dial feature to assign your most frequently called numbers to specific number keys.p. 32Dialling a number from the USIM/SIM card1. In Idle mode, enter the location number for the phone number you want and press [ ].2. Find the number you want.3. Press <Call> or [ ] to make a voice call, or <V-Call> to make a video call to the number.Ending a callPress [ ] or close the phone.Answering a callWhen you receive an incoming call, the phone rings and displays the incoming call image. Press [ ] or <Accept> to answer the call.Tips for answering a call• When Anykey answer is active, you can press any key to answer a call, except for [ ] and <Reject>.p. 68• When Active folder is active, you can answer a call by opening the phone.p. 68• Press <Reject> or [ ] to reject a call.• Press and hold [ / ] to reject an incoming call or mute the ringer, depending on the Side key setting.p. 68• Press [C] to clear the last digit or press and hold [C] to clear the whole display. You can move the cursor to edit an incorrect digit.• Press and hold [] to enter a pause between numbers.

25Call functions Viewing missed callsIf you have missed calls, the screen displays how many calls you have missed.1. Press <View>.2. If necessary, scroll through the missed calls.3. Press [ ] to dial the number you want.Using the headsetUse the headset to make or answer calls without holding the phone. Connect the headset to the jack on the left side of the phone. The button on the headset work as listed below:Options during a callYou can access a number of functions during a call.Adjusting the volume during a callUse [ / ] to adjust the earpiece volume during a call.Press [ ] to increase the volume level and [ ] to decrease the volume level.Placing a call on hold/RetrievingPress <Hold> or <Unhold> to place the call on hold or retrieve the call.Making a second callYou can make another call if your network supports it.1. Press <Hold> to put the call on hold.2. Make the second call in the normal way.3. Press <Swap> to switch between the calls.4. Press <Options> and select Drop → Drop held call to end the call on hold.5. To end the current call, press [ ].Answering a second callYou can answer an incoming call while already on the phone, if your network supports it and you have activated the call waiting feature.p. 70 1. Press [ ] to answer the call. The first call is automatically put on hold.2. Press <Swap> to switch between the calls.3. Press <Options> and select Drop → Drop held call to end the call on hold.4. To end the current call, press [ ].To Pressredial the last call the button twice.answer a call the button.end a call and hold the button.

Call functions26Transferring a callYou can transfer the currently active call to a caller on hold, if your network supports it. With this option, the two callers can talk to each other, but you are disconnected from the call.Press <Options> and select Transfer.Using the loudspeaker featureUse the speaker to talk and listen with the phone a short distance away. Press <Options> and select Loudspeaker, or press [OK].Using a Bluetooth headsetUse an optional Bluetooth headset to talk on the phone without holding the phone to your ear. To use this feature, you first need to register your headset and connect it to the phone.p. 71Press <Options> and select Switch to headset. To switch the call back to the phone, press <Options> and select Switch to phone.Switching off the microphone (Mute mode)You can temporarily switch off your phone’s microphone so that the person on the phone cannot hear you.Press <Options> and select Mute. To turn the microphone back on, press <Options> and select Unmute.Muting or sending key tonesYou can turn the key tones off or on.Press <Options> and select Mute key tone or Unmute key tone.Using PhonebookYou can access the Contacts menu to locate or store contacts in Phonebook.p. 30Press <Options> and select Contacts.Sending an SMS messageYou can create and send an SMS message to other people as well as to your current call participants.Press <Options> and select Send text message.p. 41Sending a sequence of DTMF tonesDual tone multi-frequency (DTMF) tones are the tones used in phones for tone dialling.You can send DTMF tones as a group after entering the entire number you need to send or retrieving a number from Phonebook. This feature is helpful for entering a password or an account number when you call an automated system, like a banking service.To communicate with answering machines or computerised telephone systems, Unmute key tone must be selected.

27Call functions 1. When connected with a teleservice system, press <Options> and select Send DTMF.2. Enter the number you need to send and press <Send>.Adding a memoYou can add a memo during a call. Press <Options> and select Memo.p. 60Making a multi-party call Use this feature to allow as many as six people to join a multi-party call, or conference call.Your service provider must support multi-party calls for you to use this feature.Setting up a multi-party call1. Call the first participant.2. Call the second participant. The first call is automatically put on hold.3. Press <Options> and select Join. The first participant is added to the multi-party call.4. If desired, call another person or answer an incoming call.5. Press <Options> and select Join.6. Repeat steps 4 and 5 as desired.Having a private conversation with one participant1. Press <Options> and select Split. 2. Select a name or number from the participant list.You can talk privately with that person, while the other participants converse with each other.3. To return to the multi-party call, press <Options> and select Join. Disconnecting one participant1. Press <Options> and select Drop call. 2. Select a name or number from the participant list. The participant is disconnected from the call, but the call continues with the other parties.3. Press [ ] to end the multiparty call.Using the video call featureIn a 3G (UMTS) service area, your phone can make or receive a video call which allows you to see another person on the screen during a conversation. The other person’s phone must support the video call feature.Making a video call1. In Idle mode, enter the area code and phone number.2. Press [ ].Answering a video callWhen you receive a video call, answer a video call as receiving a voice call. Press <Show me> to allow the caller to see you.

28Using video call optionsDuring a video call, press <Options> to access the following options:•Loudspeaker/Loudspeaker off: turns the loudspeaker on or off.•Switch to headset/Switch to phone: switch the call to a Bluetooth headset or back to the phone.•Mute camera: turn the camera off.•Mute voice: turn the microphone off.•Mute camera & voice: turn the camera and the microphone off.•Mute key tone: turn the key tones off.•Zoom: display the zoom control bar.•Brightness: display the brightness control bar.•Effects: change the colour tone of the image.•Hide information/Show information: hide or display information about the video call.•Send DTMF: send dual tone multi-frequency (DTMF) tones as a group after entering the entire number you need to send or retrieving a number from Phonebook.•Video quality: change the image quality of the camera.•End call: end the video call.Menu functionsAll menu options listedCall log (OK 1)The Call log menu enables you to view the calls you have dialled, received, or missed, the length of your calls, and the cost of your calls.To access this menu, press [OK] in Idle mode and select Call log.Missed calls (OK 1.1)This menu displays the most recently received calls that you did not answer.Accessing a call record1. Scroll to the name or number you want. The call list also shows the number of call repetition.2. Press [ ] to dial the number, or [OK] to view the details of a call.Using call record optionsWhile viewing the call list, press <Options> to access the following options:•Details: access information about the selected call record.•Voice call: place a voice call.•Video call: place a video call.

29Menu functions Call log (OK 1)•Use number: paste the selected number to the normal dialling screen.•Save to Contacts: save the selected number in Phonebook.•Send message: send a message to the selected number using SMS, MMS, or file messenger.•Delete: delete the call record.•Delete all: delete all records.Dialled calls(OK 1.2)This menu displays the most recent calls you have dialled.Received calls(OK 1.3) This menu displays the most recent calls you have received.Current contacts (OK 1.4)This menu displays all of the calls you have dialled, received, or missed.Delete all (OK 1.5)Use this menu to delete all of the records in each call type.1. Press [OK] to check the call type(s) to clear.2. Press <Delete>.3. Press <Yes> to confirm the deletion.Data calls (OK 1.6)Use this menu to view the total amount of sent or received data.To reset a counter or all of the counters, press <Options> and select Reset or Reset all.Calls cost(OK 1.7) This network feature displays the cost of calls. This menu is available only if your USIM/SIM card supports this feature. Note that this is not intended to be used for billing purposes.•Total costs: check the total cost of all your calls. If the total cost exceeds the maximum cost set in Edit cost limit, you must reset the counter before you can make another call.•Last call cost: check the cost of your last call.•Max cost: check the maximum cost set. Press <Options> to access the following options:•Reset call cost: reset the cost counters.•Edit cost limit: set the maximum cost authorised for your calls.•Setup currency: set the price per unit that is applied when the cost of your call is calculated.

Menu functions30Calls time(OK 1.8) This menu displays the time log for voice and video calls made and received. The actual time invoiced by your service provider will vary.• Total dialled: check the total length of voice calls dialled.• Total received: check the total length of voice calls received.• Total dialled: check the total length of video calls dialled.• Total received: check the total length of video calls received.To reset a counter or all of the counters, press <Options> and select Reset or Reset all.Contacts (OK 2)You can store phone numbers on your USIM/SIM card and in your phone’s memory. The USIM/SIM card and phone’s memory are physically separate, but they are used as a single entity called Phonebook. In the Contacts menu, you can manage your Phonebook entries.To access this menu, press [OK] in Idle mode and select Contacts.Search contact (OK 2.1)Use this menu to search for numbers in Phonebook.Finding an entry1. Enter the first few letters of the name that you want to find.2. Select the name you want from the list.3. Press [ ] to dial the number, or [OK] to edit the contact information.Using contact optionsWhile viewing the contact list, press <Options> to access the following options:•Details: access detailed information about the currently selected contact.•Edit: edit the contact information.•Video call: make a video call.You can quickly access this menu by pressing <Contacts> in Idle mode.

31Menu functions Contacts (OK 2)•New: add a new contact.•Delete: delete the selected contact.•Search groups: access the caller group list.•Service number: access service numbers preset by your service provider.•Delete all: delete all contacts.While viewing details of a contact, press <Options> to access the following options:•Edit: edit the contact information.•Send message: send a message to the selected number using SMS, MMS, or file messenger.•Special options: set the following options:Picture: assign a caller ID image to alert you to a call from the person.Ringtone: assign a ringer melody to alert you to a call from the person.Msg. alert tone: select a tone to alert you to an incoming message from the person.•Add to speed dial: set the selected number as a speed dial number.•Video call: make a video call.•Copy to SIM/Copy to phone: copy the selected contact to the phone’s memory or USIM/SIM card or vice versa.•Send name card: send the contact via SMS, e-mail, file messenger, Bluetooth, or infrared port. •Use number: paste the number to the normal dialling screen.•Delete: delete the contact.New contact (OK 2.2)Use this menu to add a new contact to Phonebook.Storing a number in the phone’s memory1. Select Phone.2. Change the settings or enter information about the contact.•First name/Last name: assign a name.•Phone number: add a mobile phone number.•Work email: assign a business e-mail address.•Home email: assign a personal e-mail address.•Group: assign a caller group.•Homepage: enter a homepage address.•Birthday: enter the person’s birthday.•More information: enter the job title, department, company, nickname, and additional note about the person.3. Press <Options> and access the following options to add additional information:•Special options: assign a caller ID image, call ringer, or message ringer for the contact.•Add phone number: add a number category to the contact.•Delete phone number: remove the selected number category from the contact entry.

Menu functions32•Change type: change the type of the selected number.•Mark video call/Unmark video call: set the selected number as a video call number.4. Press <Options> and select Save.Storing a number on the USIM/SIM card1. Select SIM.2. Press [Down] and change the settings or enter information about the contact.•Name: assign a name.•Phone number: add a mobile phone number.•Email: (for USIM) assign an e-mail address.•Group: (for USIM) assign a caller group.•Location number: enter a location number.3. Press <Save>.Groups (OK 2.3)Use this menu to organise your contacts in caller groups.Adding members to a caller group1. Select a group.2. Press [OK] to check the contacts you want.3. Press <Save>.Managing caller groupsFrom the group list, press <Options> to access the following options:•View members: display the members of the select group.•Add member: add contacts to the selected group.•Add group: add a new group.•Rename group: change the group name.•Delete group: delete the selected group. •Delete all groups: delete all groups, including the default groups.Speed dial (OK 2.4)Use this menu to assign speed dial numbers (2 to 9) to eight of your most frequently called numbers.Assigning speed dial entries1. Select a key location from 2 to 9. Key 1 is reserved for your voicemail server.2. Select the contact you want from the contact list.3. Scroll to a number, if the contact has more than one number.4. Press <Select>.When you are using a USIM card, press <Options> and select Add item to enter additional numbers.

33Menu functions Contacts (OK 2)Managing speed dial entriesWhile viewing the Speed dial screen, press <Options> to access the following options:•Add: assign a number to an unassigned key.•Details: display details about the speed dial entry.•Video call: make a video call.•Change: assign a different number to an assigned key.•Remove: clear the speed dial setting for the selected key.Dialling speed dial entries Press and hold the appropriate key in Idle mode.My name card(OK 2.5)Use this menu to create your name card and send it to other people.Saving your name cardThe procedure for creating your name card is the same as the one for saving a number in the phone’s memory.p. 31 Using name card optionsAfter saving your name card, press <Options> to access the following options:•Edit: edit the name card. •Send name card: send the name card via SMS, e-mail, file messenger, Bluetooth, or infrared port.•Delete: delete the name card.Copy all (OK 2.6)Use this menu to copy all of the contacts stored on the USIM/SIM card to the phone’s memory, or vice versa.Own number (OK 2.7)Use this feature to check your phone numbers, or to assign a name to each of the numbers. Changes made here do not affect the actual subscriber numbers on your USIM/SIM card.Service number(OK 2.8) This menu is available if your USIM/SIM card supports Service Dialling Numbers (SDN). Use this menu to view the list of SDNs assigned by your service provider, including emergency numbers, directory enquiries, and voicemail numbers.1. Scroll to the number you want.2. Press <Dial> or [ ].

Menu functions34Settings(OK 2.9)Use this menu to change the default settings for Phonebook.•Viewing settings: select whether the contact list is sorted by last name or by first name.•Default storage settings: select a default memory location to save contacts. If you select Optionally, the phone will ask you to select a memory location when saving a number.Memory status (OK 2.0)Use this menu to view the number of contacts you have stored and total number of contacts you can store in Phonebook.Applications (OK 3)Use this menu to play media files, to record a voice memo, to set time zones, or to use the phone as a calculator or converter.To access this menu, press [OK] in Idle mode and select Applications.SAT (OK 3.1)This menu is available if you use a USIM/SIM card that supports SIM Application Toolkit menus and provides additional services, such as news, weather, sports, entertainment, and location services. Available services may vary, depending on your service provider’s plans.For details, see your USIM/SIM card instructions or contact your service provider.Media player (OK 3.2)Use this menu to enjoy media files, such as video clips and music files. You can also play streaming contents. Downloading or receiving media filesUse this method to save media files to your phone:• Download from the wireless webp. 39• Download from a computer using Samsung PC Studio Samsung PC Studio User’s GuideYou can quickly access the Media player by pressing [] in Idle mode.

35Menu functions Applications (OK 3)• Receive via IrDA or Bluetoothp. 72, p. 71• Copy files to a memory card and insert the card into the phoneCreating the play listAdd the media files to the play list so you can play them.1. From the Media player screen, press [OK].2. Press <Options> and select Add.3. Select Folder or Files. 4. Press [OK] to check the files you want, or scroll to the folder you want.5. Press <Add> or <Select>.6. To play files, press [OK].Playing media files1. From the Media player screen, press [OK].2. Select a file. The file plays.During playback, you can use the following keys:Using Media player optionsFrom the Media player screen during playback, press <Options> to access the following options:•Pause/Resume: pause or resume playback.•Stop: stop playback.•Send: send the selected file via MMS, e-mail, file messenger, Bluetooth, infrared port, or online album, if provided.•Open play list: display the play list.•Activate key: get a new license key when the key for the selected DRM file expires.•Reactivate key: get another key even when the key for the selected DRM file has not expired.•Go to file Manger: go to the media file list.•Hidden from bluetooth: hide the file so that other Bluetooth devices cannot access it.•Visible to bluetooth: share the file with other Bluetooth devices.•Show controller/Hide controller: display or hide the control bar of the Media player.•Details: access the file properties.Key FunctionOKPauses or resumes playback.Left Goes to the previous file. Moves backward in a file when held down.Right Skips to the next file. Skips forward in a file when held down.Up Opens the play list. / Adjusts the volume.Down Stops playback.Key Function

37Menu functions Applications (OK 3)Using voice memo optionsFrom the player screen, press <Options> to access the following options:•Play: play the voice memo.•Resume: resume playback.•Stop: stop playback.•Record: record a new voice memo.•Send: send the selected file via MMS, e-mail, file messenger, Bluetooth, or infrared port.•Go to sounds: go to the Sounds folder.•Rename: change the name of the file.•Delete: delete the selected file.•Hidden from bluetooth: hide the file so that other Bluetooth devices cannot access it.•Visible to bluetooth: share the file with other Bluetooth devices.•Details: access the file properties. •Record settings: change the default settings for recording a voice memo.Default name: change the default prefix of the voice memo.Recording time: select a maximum recording time.World clock(OK 3.4)Use this menu to set your local time zone and find out what time it is in another part of the world. Setting your local time zone1. From the world map, press [Left] or [Right] to select the city that corresponds to your home time zone. As the time line moves, the time and date of the given zone display.2. Press [OK] to save the time zone.Viewing and setting a foreign time zone1. From the world map, press [Down].2. Press [Left] or [Right] to select the foreign time zone you want to view.3. Press [OK] to save the time zone.Applying Daylight Savings Time1. From the world map, press <Options> and select Summer time.2. Press [OK] to check the time zone(s) you want. 3. Press <Select>.4. Press <Options> and select Save.

Menu functions38Calculator(OK 3.5) Use this menu to perform basic arithmetic functions such as addition, subtraction, multiplication, and division.Preforming a calculation1. Enter the first number. Press [ ] to include a decimal point.2. Enter the operation for your calculation by pressing the Navigation keys.3. Enter the second number.4. Press [OK] to view the result.Using calculator optionsPress <Options> to access the following options:•Equal: view the result.•Recent calculation: display the last result you calculated.•Save to memory: save a value into the calculator memory.•Recall memory: retrieve the saved value.•Clear memory: clear the saved values.Converter(OK 3.6)Use this menu for common conversions, such as currency and temperature.Preforming a conversion1. Select the converter type you want.2. Press [Left] or [Right] to select the original unit and press [Down].3. Enter the value to be converted.• Press [ ] to insert a decimal point.• Press [ ] to change the temperature to above zero (+) or below zero (-).4. Press [Down].5. Press [Left] or [Right] to select the unit you want to convert to.The equivalent value for the amount you entered displays.Using converter optionsPress <Options> to access the following options:•Clear: clear the current values.•Reverse: reverse the conversion.•Currency rates: edit the currency rate list.

41Menu functions Messages (OK 5)Messages (OK 5)Use the Messages menu to send and receive short text messages, multimedia messages, and e-mails. You can also use WAP push message, voicemail, and cell broadcast message features.To access this menu, press [OK] in Idle mode and select Messages, or press <Msg.> in Idle mode.Create new (OK 5.1)Use this menu to create and send text messages, multimedia messages, or e-mails. You can also send files using MMS.Text message (OK 5.1.1)Short Message Service (SMS) allows you to send or receive text messages.1. Enter your message. Press <Options> and select Insert to retrieve a text template, contact entry, or bookmark.2. Press [OK].3. Enter a destination number.To send the message to more than one recipient, press [Down] and fill in additional destination fields.4. Press [OK] to send the message.Multimedia message (OK 5.1.2) Multimedia Message Service (MMS) delivers messages containing a combination of text, image, video, and audio, from phone to phone or from phone to e-mail.1. Enter the message subject.2. Select the Text line.3. Enter the message text and press [OK].4. Select the Picture or video or Audio line.5. Select an image or audio file, press <Add>.6. Press <Options> to access the following options:•Preview: display the message you created.•Edit text/Change file: edit the added text, picture, or sound clip.•Delete text/Delete file: delete the added text, picture, or sound clip.•Save to Drafts: save the message in the Drafts box.•Add page: add a page. Move to each page by pressing [Left] or [Right] on the message screen.The maximum number of characters allowed in a short message varies by your service provider. If your message exceeds the maximum number of characters, the phone will split the message.The maximum size allowed for an MMS message can differ depending on the country. If you cannot attach another file, add a new page.

Menu functions42•Move page: move the current page to the next or previous page.•Delete page: delete the added page.•Edit style: change the page properties.This page: set the page duration and change the font colour and style for the selected page.All page: change the background colour and page layout.•Save as template: save the message as a template in the Multimedia templates folder.7. When you have finished, press [OK].8. Enter a phone number or e-mail address.To send the message to more than one recipient, press [Down] and fill in additional destination fields.9. Press [OK] to send the message.File messenger (OK 5.1.3)Use this menu to send multiple media files by attaching them to an MMS message. 1. Enter the message subject in the Subject line.2. Move to the Message field and enter the message text.3. Select the Attach files line.4. Press [OK] to check the files you want.5. Press <Options> and select Attach.6. Press <Options> to access the following options:•Attached file list: display the file list you attached.•Add name card: add a contact as a Vcard format.•Add v-calendar: add a calendar memo.•Delete all attachments: delete all of the attached files.•Save to Drafts: save the message in the Drafts box.7. When you have finished, press [OK].8. Enter a phone number or e-mail address.To send the message to more than one recipient, press [Down] and fill in additional destination fields.9. Press [OK] to send the message.Email (OK 5.1.4)You can send and receive e-mails that include text, audio, and images. To use this feature, you need to set up your e-mail account.p. 501. Enter the e-mail subject in the Subject line.2. Move to the Message field.3. Enter the message text.4. Select the Attach files line.

43Menu functions Messages (OK 5)5. Press [OK] to check the files you want.6. Press <Options> and select Attach.7. Press <Options> to access the following options:•Attached file list: display the file list you attached.•Add name card: add a contact as a Vcard format.•Add v-calendar: add a calendar memo.•Delete all attachments: delete all of the attached files.•Save to Drafts: save the e-mail in the Drafts box.8. When you have finished, press [OK].9. Enter an e-mail address.To send the e-mail to more than one recipient, press [Down] and fill in additional destination fields. 10.Press [OK] to send the e-mail.Inbox (OK 5.2)This folder stores all types of messages you have received, except for e-mails. MMS, SMS, voicemail, WAP push messages from the WAP server, and configuration messages are stored here.Configuration messages, which are sent from your service provider, contain network parameters to let you easily apply network settings to your phone.Viewing a message at the time of its receiptWhen a message has been received, the phone alerts you by:• Displaying a message icon and text notification• Sounding or vibrating, depending on the message alert settingTo read a message immediately, press <View>. To read it later, press <Exit>.For an MMS notification, press <Options> and select Retrieve. The message is downloaded from the MMS server to the phone’s memory.Viewing a message in InboxOn the message list, the following icons are available, depending on the message type:While viewing the message list, press <Options> to access the following options:• SMS • MMS• MMS notification • Configuration• WAP push • SIM• Depending on the DRM (Digital Rights Management), you may not be able to forward some messages. They are indicated by the icon.• An ! icon shows that a message was sent with high priority. A grey icon means that the message is of low priority.

Menu functions44•View: display the selected message. For MMS notifications, you can access the file properties.•Retrieve: retrieve the MMS message from the server.•Reject: reject the MMS message.•Cancel retrieving: cancel retrieving the MMS message from the server.•Reply: send a reply to the sender.•Reply to all: send a reply to the sender and all recipients.•Forward: forward the message to other people.•Install: apply the configuration value in the message to the phone.•Sort by: change the sort order of the message list.•Delete: delete the currently selected message.•Delete all: delete all messages.•Details: access the message properties.Using message optionsWhile viewing a message, press <Options> to access the following options:SMS messages•Call: dials the highlighted phone number.•Create email: send an e-mail t the highlighted e-mail address. •Reply: reply to the sender. •Forward: forward the message.•Call back: dial the phone number of the sender.•Save to Contacts: extract phone numbers or e-mail addresses from the message and saves them in Phonebook.•Move to SIM/Move to phone: move the message between the phone’s memory and the USIM/SIM card.•Delete: delete the message.MMS messages•Play: play the message.•Call/Go to URL/Go to RTSP: dials the highlighted phone number or access the highlighted web link.•Open file: open the selected media files.•Add to bookmarks: save the highlighted web link to the bookmark list.•Create email: send an e-mail to the highlighted e-mail address.•Create multimedia message: send an MMS message to the highlighted address.•Reply: send a reply to the sender.•Reply to all: send a reply to the sender and all of the recipients.•Forward: forward the message to another person.•Send to Album: send the message to the online media album, if provided.•Call back: dial the phone number of the sender.

45Menu functions Messages (OK 5)•Save as template: save the message as a template in the Multimedia templates folder.•Save files: save media items from the message into your phone’s memory or a memory card.•Save to Contacts: extract phone numbers or e-mail addresses from the message and save them in Phonebook.•Delete: delete the message.•Details: access the message properties.WAP push messages•Go to URL: connect to the URL specified in the message.•Delete: delete the message.Drafts (OK 5.3)This folder stores messages you have saved to send them at a later time while creating the message. On the message list, press <Options> to access the following options:•View: open the selected message.•Edit: edit the selected message.•Send: send the selected message.•Sort by: change the sort order of the list.•Delete: delete the selected message.•Delete all: delete all messages.Outbox (OK 5.4)This folder stores messages you have tried to send or have being sent. The following icons on the message icons indicates the sending status:• indicates the message is being sent. • indicates the message is failed to send.While viewing the message list, press <Options> to access the following options:•View: display the selected message.•Send again: resend the message.•Edit: edit the selected message.•Cancel sending: cancels sending the message.•Sort by: change the sort order of the list.•Delete: delete the message.•Delete all: delete all messages.•Details: access the message properties.Sent box (OK 5.5)This folder stores messages that you have sent successfully. While viewing the message list, press <Options> to access the following options:•View: display the selected message. •Forward: forward the message to other people.•Edit: edit the selected message.•Sort by: change the sort order of the list.

Menu functions46•Delete: delete the message.•Delete all: delete all messages.•Details: access the message properties.Email inbox (OK 5.6)This folder stores e-mails that you have received.Viewing received e-mails1. From the e-mail folder, press <Options>.2. Select Download to get new e-mails from your server.The phone checks for new e-mails and retrieve received e-mails. The icons tell you the status of each e-mail:•: Retrieved e-mail• : Retrieved e-mail with attachments• : E-mail not retrieved3. Select an e-mail or header.4. If the e-mail has more than one page, press [ / ] to scroll through pages one by one. 5. Select an attached file to view or play it.Using e-mail optionsWhile viewing the e-mail list or an e-mail, press <Options> to access the following options: •View: open the selected e-mail.•Retrieve: retrieve the body of the selected e-mail header from the e-mail server.•Reply: send a reply to the sender.•Reply to all: send a reply to the sender and all recipients.•Forward: forward the e-mail.•Save files: save media items from the message into your phone’s memory or a memory card.•Download: download new e-mails or headers from the e-mail server.•Sort by: change the sort order of the list.•Save to Contacts: extract phone numbers ore-mail addresses from the e-mail and save them in Phonebook.•Block: add the sender’s e-mail address or e-mail subject to the Block list.•Delete from phone: delete the selected e-mail or all e-mails from the phone’s memory.•Delete permanently: delete the selected e-mail or all of the e-mails from both the phone’s memory and the e-mail server.•E-mail accounts: change the active e-mail account.•Details: access the e-mail properties.• Depending on the DRM (Digital Rights Management), you may not be able to forward some messages. They are indicated by the icon.• An ! icon shows that an e-mail was sent with high priority. A grey icon means that the e-mail is of low priority.

47Menu functions Messages (OK 5)Media album(OK 5.7)Use this menu to access the Media Album service, with which you can organise your own online media album, adding media content and messages via the wireless web. This menu is available only if supported by your service provider.Templates(OK 5.8)Use this menu to create, edit, and send text templates and MMS templates.Text templates (OK 5.8.1)Use this menu to preset frequently used messages.Press <New> to create a new text template.From the template list, press <Options> to access the following options:•Send: send the template as an SMS, MMS, file messenger, or e-mail.•New: add a new template.•Edit: change the selected template.•Delete: delete the template.•Delete all: delete all templates.Multimedia templates (OK 5.8.2)When you access this menu, you can view the list of templates you have saved.From the template list, press <Options> to access the following options:•View: open the template.•Send: send the template as an MMS message.•New: add a new template.•Edit: change the selected template.•Delete: delete the template.•Delete all: delete all templates.Broadcast (OK 5.9)Your phone receives Cell Broadcast (CB) messages, which are text messages related to various topics, such as weather forecast, traffic, and news report, from networks. Use this menu to access received CB messages.All CB messages are stored in the Temporary folder and will be deleted after a period of time. If you don’t want a message to be deleted, save it to the Archive folder. While viewing the message, press <Options> and select Save.On the message list, press <Options> to access the following options:•View: open the selected message.•Delete: delete the selected message.•Delete all: delete all of the messages in the selected folder.

51Menu functions Messages (OK 5)Keep in server: leave the copies of e-mails in the server after retrieving.My Address: set your e-mail address.User name: set the user name for POP3 or IMAP4 server connections.Password: set the password for POP3 or IMAP4 server connections. Use SMTP Authentication: activate the SMTP authentication.Same as POP3/IMAP4: select if you want the SMTP server to have the same parameters as the POP3 or IMAP4 server.User name: enter the SMTP user name.Password: set the SMTP password.Voice mail (OK 5. .4)You can change the number of the voicemail centre.Push message (OK 5. .5)You can determine whether or not your phone receives push messages.Broadcast (OK 5. .6)Use this menu to change the settings for the broadcast message service. •Receive: enable or disable the reception of broadcast messages.•Channel: specify the channels from which you receive broadcast messages.When you select Respective channels, you can set up a list of active CB channels.•Language: select the languages in which broadcast messages display.Memory status(OK 5. )Use this menu to view the memory status for SMS, MMS, e-mail, and push messages.

Menu functions52File manager (OK 6)The File manager menu allows you to access images, videos, ringtones, sounds, and other files stored in the phone’s memory or a memory card.To access this menu, press [OK] in Idle mode and select File manager.ImagesThis menu displays the default wallpapers and photos you have taken and images downloaded or received in messages. You can also edit an image using various editing options.Viewing an image1. Press [Left] or [Right] to scroll to an image folder.2. Select an image.3. Press [Left] or [Right] to view other images.Editing an image1. Select a image.2. Press <Options> and select Edit.3. Change the photo using the following options:•Resize: change the image size.•Effects: change the colour tone or apply a special effect to the photo.•Adjust: adjust the image brightness, contrast, or colour balance.•Frames: apply a decorative frame to the photo.•Cliparts: add an image clip to the photo.•Insert text: add text to the photo.•Rotate: rotate the photo clockwise or counterclockwise.•Flip: flip the photo vertically or horizontally.•Crop: select a variously sized and shaped section of the photo.4. When you have finished, press [OK].5. Enter a photo name and press <Save>.Using image optionsWhile viewing an image, press <Options> to access the following options:•Send: send the selected file via MMS, e-mail, file messenger, Bluetooth, infrared port, or online media album, if provided.•Hidden from bluetooth: hide the file so that other Bluetooth devices cannot access it.•Visible to bluetooth: share the file with other Bluetooth devices.As a result of the DRM (Digital Rights Management) system, some of the media items you download from the Internet or receive by MMS may require a license key to access them or forward them to other people. You can acquire the key from the website which owns the rights to the content; use the Activate key option in the item options.

53Menu functions File manager (OK 6)•Activate key: get a new license key when the key for the selected DRM file expires.•Reactivate key: get another key even when the key for the selected DRM file has not expired.•Set as: set the image as your wallpaper for the main display or external display, or a caller ID image for a contact.•Move: move the file to another folder.•Copy: copy the file to another folder.•Real size: show the image in the real size or display size.•Slide show: set all images to display as a slide show.•Edit: edit the image and save as a different file.•Delete: delete the selected file.•Rename: change the name of the file.•Details: access the file properties.•Key management: manage the license keys you have acquired.While viewing the image list, press <Options> to access the following options:•View: open the selected image.•Send: send the file via MMS, e-mail, file messenger, Bluetooth, infrared port, or online media album, if provided.•Hidden from bluetooth: hide the file so that other Bluetooth devices cannot access it.•Visible to bluetooth: share the file with other Bluetooth devices.•Set as: set the image as your wallpaper for the main display or external display, or a caller ID image for a contact.•Move: move the file to another folder.•Copy: copy the file to another folder.•Delete: delete the selected file or all files.•Rename: change the name of the file.•Lock/Unlock: lock the file to prevent it from being deleted, or unlock the file.•New folder: add a new folder.•Details: access the file properties.•Memory status: access memory information for each folder in File manager.Downloading images1. Press [Left] or [Right] to scroll to Downloads.2. Select More pictures. You are connected to a preset website.3. Search for an image and follow the onscreen instructions to download it.VideosThis menu displays video clips you have recorded, downloaded, or received in messages.Playing a video clip1. Press [Left] or [Right] to scroll to a video folder.

Menu functions56SoundsThis menu displays the default ringtones and sound files you have recorded, downloaded, or received in messages. You can also access voice memos you have recorded.Playing a sound clip1. Press [Left] or [Right] to scroll to a sound folder.To access voice memos, scroll to the Voice memos folder. p. 362. Select a sound clip. The sound is played.During playback, you can use the following keys:Using sound optionsDuring playback, press <Options> to access the following options:•Send: send the selected file via MMS, e-mail, file messenger, Bluetooth, infrared port, or online album, if provided.•Hidden from bluetooth: hide the file so that other Bluetooth devices cannot access it.•Visible to bluetooth: share the file with other Bluetooth devices.•Set as ringtone: set the selected sound clip as your call ringer.•Set as caller ID: set the selected sound clip as a caller ID ringer for a contact.•Delete: delete the selected file or all files.•Rename: change the name of the file.•Details: access the file properties.Downloading ringtones1. From the Ringtones folder, select More sound. You are connected to a preset website.2. Search for a ringtone and follow the onscreen instructions to download it.Games & MoreUse this menu to download Java games and play them.Playing Powerinlinex1. From the Games & More folder, select Powerinlinex.2. Press any key, except for [ ].3. Select PLAY or press <PLAY>.4. Select a character.5. Press <OK> to start a game.6. Press [Up] to make the character move forward.Key DescriptionLeft Goes to the previous file.Right Skips to the next file.Up/Down//Adjusts the volume.OKAllows you to send the sound clip to other people.

59Menu functions Organiser (OK 7)•Press <Snooze> to stop the wake-up alarm for 5 minutes. You can do this a maximum of 5 times.Deactivating an alarm1. Select the alarm you want to deactivate.2. Select Off on the Alarm line.3. Press <Options> and select Save.Calendar (OK 7.2)Use this menu to keep track of your monthly schedule.Consulting the calendarWhen you open the calendar, today’s date is marked with a blue box. Scroll to the date you want. You can move to the next or previous month by pressing [/].Press <Options> to access the following options:•View: display the stored events for that date.•New: add a new event, anniversary, task, or memo. You can schedule more than one event per day.•Week view: display the week view screen.•Go to today: display the current date.•Go to date: display a specific date.•Start date: set whether the calendar starts with Sunday or Monday.•Delete: delete the events for a specific period.•Delete all: delete all of the events in the calendar.Entering a new schedule item1. Select a date on the calendar. 2. Press <Options> and select New → Schedule.3. Enter information or change the settings in the following entry fields:•Title: enter the title of the event.•Details: enter the event details.•Start/End: enter the starting or ending times for the event.•Start date/End date: enter the starting or ending dates for the event.•Location: enter information about the event location. •Alarm: select to set an alarm for the event and set the time for the alarm.•Repeat: select to set the event to recur. You can select a repeat unit and set the date to end repeating.•Expiry: set when the event will be deleted from the calendar. 4. Press <Options> and select Save.Entering a new anniversary1. Select a date on the calendar.2. Press <Options> and select New → Anniversary.

Menu functions603. Enter information or change the settings in the following entry fields:•Occasion: enter information about the anniversary.•Date: enter the date.•Alarm: select to set an alarm for the anniversary. You can set the number of days before the event date and the time for the alarm to sound.•Repeat every year: select to set the phone to remind you of the anniversary every year.4. Press <Options> and select Save.Entering a task1. Select a date on the calendar.2. Press <Options> and select New → Task.3. Enter information or change the settings in the following entry fields:•Title: enter the title for the task.•Task: enter the task content.•Start date: enter the starting date.•Due date: enter the ending date.•Priority: select a priority level.4. Press <Options> and select Save.Entering a memo1. Press <Options> and select New → Memo.2. Enter the memo text and press [Down].3. Enter the date.4. Press <Options> and select Save.Viewing an event1. Select a date on the calendar to display the events for that day. The list of events displays.The following icons indicate the type of event:2. Select an event to view its details.Using event optionsFrom the event list, press <Options> to access the following options:•View: access the selected event.•New: add a new event.•Completed/To do: change the status of the selected task.•Month view: switch to the month view screen.•Week view: switch to the week view screen.•Change date/Change due date/Reschedule: change the date of the event.•Delete: delete the selected event.•Delete all: delete all of the events for the selected day.•Send schedule/Send task: send the event via SMS, e-mail, file messenger, Bluetooth, or infrared port.•Send memo: send the memo via SMS.• Scheduled events • Anniversaries• Tasks • Memos

61Menu functions Organiser (OK 7)Week view(OK 7.3)Use this menu to view events for the selected week. The current date is marked in blue. Square brackets on a calendar date indicate the types of events scheduled for that day.1. Scroll up to the date line and press [Left] or [Right] to access another week.2. Select the time cell that contains the event you want.Today’s events(OK 7.4)Use this menu to view events for the selected date.Select an event to view its details. The event opens in Edit mode.Schedule(OK 7.5)This menu displays the scheduled events. If you have set the Repeat and Alarm options, the and icons display. Select a schedule item to view its details.Anniversary (OK 7.6) This menu displays anniversaries you have created. If you have set the Repeat and Alarm options, the and icons display. Select an anniversary item to view its details.Task(OK 7.7)Use this menu to display tasks you have created. The icons on the right indicate the importance; the lower the number on the icon, the higher the priority. A check mark appears in the status check box if the task has been completed. Select a task to view its details.Memo(OK 7.8)This menu displays memos you have created.Select a memo to view its details. Missed event alarm(OK 7.9)When you are unable to acknowledge an alarm for a scheduled event or anniversary, the phone stores the event alarm until you confirm it.1. Select an event.2. Press <Confirm> to confirm and delete the event.Memory status (OK 7.0)This menu displays the number of events of each type you have created, and the total number of events you can store.

Menu functions62Camera (OK 8)You can use the camera module embedded in your phone to take photos and record videos. Using the Camera menu, you can turn on the camera and manage your photos and video clips.To access this menu, press [OK] in Idle mode and select Camera, or press and hold [ ]. Taking a photoThe camera will produce JPEG photos.1. To turn on the camera, access the Camera menu or press and hold [ ].2. Press [ ] to switch between the interior lens below the display and the exterior lens on the external of the phone.3. Adjust the image by aiming the lens at the subject.• Press <Options> to use the camera options. See the next section.• Use the keypad to change the camera settings or switch to other modes.p. 634. Press [OK] to take a photo. The photo is saved in the Pictures folder.Using camera options in Capture modeIn Capture mode, press <Options> to access the following options:•Take photo: take a photo.•Record video: switch to Record mode.•Switch camera: switch between the interior lens and the exterior lens.•Go to photos: display the photos stored in the Pictures folder.p. 52•Shooting mode: take a photo in the following modes:Single shot: take a photo in the normal mode.Multi shot: take several action stills. You can select the number of still images the camera will take.• Do not take photos of people without their permission.• Do not take photos in a place where cameras are not allowed.• Do not take photos in a place where you may interfere with another person’s privacy.When you take a photo in direct sunlight or in bright conditions, shadows may appear on the photo.Hold the phone still for one or two seconds after pressing the camera shutter key to allow the image data to process.5.To Pressuse photo options <Options>.p. 64delete the photo <Delete> or [C].return to Capture mode [OK].

63Menu functions Camera (OK 8)Mosaic shot: take several stills and saves them in one frame. You can select the layout.•Effects: change the colour tone of the image.•Frames: apply a decorative frame.•Flash: set the flash setting.•Timer: set a time delay before the camera takes a photo.•Zoom: display the zoom control bar.•Brightness: display the brightness control bar.•Camera settings: change the default settings for taking a photo.Default name: change the default prefix of the file name.Default storage: select a memory location to store photos.Viewfinder: select a preview mode, either Full Screen mode or Normal mode with actual ratio.Shutter sound: select a camera shutter sound.Capture quality: select an image quality. Image size: select an image size. Multi shot speed: select the shutter speed between each shot in Multi Shot mode.Spot metering: adjust the exposure based on a specific area of the image. Select On to display the spot focus frame in the middle of the image, and change the exposure according to the brightness of the image fragment in the frame.ISO: change the ISO setting, which controls the sensitivity of your camera. For low light situations, lower the ISO number to increase the quality. The higher the ISO number, the faster the camera shutter functions and the more sensitive the camera is to light. Higher ISO settings may bring some distortion to an image.White balance: adjust the colour balance of the photo. You can make your photo appear warmer or cooler.•Camera shortcuts: view the functions of the keys you can use in Capture mode.Using the keypad in Capture modeYou can use the keypad to customise your camera settings in Capture mode.Key FunctionFlips the image vertically.Shows the mirror image.Left/Right Adjusts the brightness of the image.Up/Down Zooms in or out.1Switches to Record mode.p. 642Changes the image size.3Changes the image quality.

Menu functions64Using photo optionsAfter saving a photo, press <Options> to access the following options:•Viewfinder: return to Capture mode.•View: open the selected photo when you take multiple photos.•Send: send the photo via MMS, e-mail, file messenger, Bluetooth, or infrared port.•Delete: delete the photo.•Set as: set the photo as your wallpaper for main or external display, or as a caller ID image for a contact.•Go to photos: display the photos stored in the Pictures folder.p. 52•Rename: change the name of the photo.Recording a videoYou can use your phone just like a camcorder to record what is currently displayed on the camera screen and save it as a video file. The camera will produce 3gp video clips.1. To turn on the camera, access the Camera menu or press and hold [ ].2. Press [1] to switch to Record mode.3. Press [ ] to switch between the interior lens below the display and the exterior lens on the external of the phone.4. Adjust the image by aiming the lens at the subject.•Press <Options> to use the camera options.p. 65• Use the keypad to change the camera settings or switch to other modes.p. 655. Press [OK] to start recording.To pause, press <Pause>.6. When you have finished, press [OK]. The video automatically saves in the Videos folder.4Changes the shooting mode and the number of photos.5Changes the colour tone of the image.7Adds a decorative frame.8Sets the timer.9Goes to the Pictures folder.p. 52Changes the preview mode.0Turns the flash on or off.Key Function7.To Pressuse the video options <Options>.p. 65delete the video clip <Delete> or [C].return to Record mode [OK].

65Menu functions Camera (OK 8)Using camera options in Record modeIn Record mode, press <Options> to access the following options:•Record: start recording.•Take photo: switch to Capture mode.•Switch camera: switch between the interior lens or exterior lens.•Go to videos: display the video clips stored in the Videos folder.p. 53•Effects: change the colour tone of the image.•Flash: change the flash setting.•Zoom: display the zoom control bar.•Brightness: display the brightness control bar.•Video settings: change the following settings for recording a video:Default name: change the default prefix of the video name.Default storage: select a memory location to store video clips.Quality: select an image quality. Recording time: select a video recording mode.Select Normal to record a video within the limit of the currently available memory. The length of your video is determined by how much memory has been used.Select Limit for MMS to record a video suitable for an MMS message.Size: select an image size.Audio record: record audio with a video clip.•Camcorder shortcuts: view the functions of the keys you can use in Record mode.Using the keypad in Record modeUsing video optionsAfter saving a video clip, press <Options> to access the following options:•Play: play back the video clip.•Viewfinder: return to Record mode.Key FunctionFlips the image vertically.Shows the mirror image.Left/Right Adjusts the image brightness.Up/Down Zooms in or out.1Switches to Capture mode.p. 622Changes the frame size.3changes the image quality.4Changes the video recording mode.5Changes the colour tone of the image.7Turns the audio on or off.9Goes to the Videos folder.p. 530Turns the flash on or off.

Menu functions68Active folder (OK 9.3.3)Use this menu to answer incoming calls by opening the phone. Anykey answer (OK 9.3.4)Use this menu to answer an incoming call by pressing any key, except [ ] or <Reject>. Side key(OK 9.3.5)Use this menu to set how the phone reacts when you press and hold [ / ] when a call comes in.•Reject: the keys rejects the call.•Silence: the keys mutes the call ringer.Key management(OK 9.3.6)Use this menu to manage the license keys you have acquired to activate media contents locked by DRM systems.Display(OK 9.4)Use this menu to change settings for the display and the light.Greeting message (OK 9.4.1)Use this menu to enter the greeting that is displayed on the main display or external display.Wallpaper(OK 9.4.2)You can change the background image that is displayed on the main display in Idle mode.Cover LCD (OK 9.4.3)Use this menu to change the settings for the external display.1. Select a display item type.•Clock: you can select a clock type.•Cover title: you can set a banner message.•Wallpaper: you can select a wallpaper image.2. Select the image you want or enter the banner message.For Wallpaper, you can select a section of an image.3. Press <Save> or [OK].4. Press <Change>.LCD brightness (OK 9.4.4)Use this menu to adjust the brightness of the main display.Backlight(OK 9.4.5) You can select the length of time the backlight and the display stays on.•On: select the length of time the backlight stays on in times of inactivity.•Dim: select the length of time the display is in Dimming mode after the backlight turns off. •Sub LCD indicator: set whether or not the icons are shown on the external display after the display turns off.

69Menu functions Settings (OK 9)Dialing display(OK 9.4.6) Use this menu to customise the settings for the screen when entering a phone number for dialling. •Font size: select a font size.•Font colour: select a font colour. •Background colour: select a background colour.Call(OK 9.5)Use this menu to set options for call functions.Caller ID(OK 9.5.1)Use this menu to prevent your phone number from being displayed on the phone of the person being called. •By network: use the default setting provided by the network.•Send: send your number each time you make a call.•Hide: ensure your number does not display on the other person’s phone.Diverting(OK 9.5.2)This network service reroutes incoming calls to a different phone number that you specify.1. Select the type of calls to be diverted.2. Select a call diverting option:•Always: divert all calls.•Busy: divert calls when you are on another call.•No reply: divert calls when you do not answer the phone.•Unreachable: divert calls when you are not in an area covered by your service provider or when your phone is switched off.•Cancel all: cancel all of the call diverting options.3. Enter the number to which the calls will be diverted in the Divert to line.4. If you selected No reply, move to the Waiting time line and select the length of time the network delays before diverting a call.5. Press <Options> and select Activate. To deactivate the call diverting, select Deactivate.Barring(OK 9.5.3)This network service allows you to restrict your calls.1. Select the type of calls to be barred.2. Select a call barring option:•All outgoing calls: prohibit outgoing calls.•Outgoing int’l calls: prohibit international calls.•Int’l calls exc. Home: only allow calls to numbers within the current country when you are abroad, and to your home country.•All incoming calls: prohibit incoming calls.Some networks do not allow the user to change this setting.

Menu functions70•Incoming calls when roaming: prohibit incoming calls when you use your phone outside of your home country.•Cancel all: cancel all of the call barring settings, allowing calls to be sent and received normally.3. Enter the call barring password supplied by your service provider.4. Press <Options> and select Activate. To deactivate the call barring, select Deactivate.Waiting(OK 9.5.4)This network service informs you when someone is trying to reach you while you are on another call.1. Select the type of calls to which the call waiting option will apply.2. Press <Options> and select Activate. To deactivate the call waiting, select Deactivate. Auto redial (OK 9.5.5)Use this menu to make up to ten attempts to redial a phone number after an unsuccessful call.Closed user group (OK 9.5.6)Use this menu to set incoming and outgoing calls to be restricted to a selected user group. For details about how to create a closed user group, contact your service provider.•Use user group: activate CUG index numbers.•Outside access: enable calls to numbers other than those in the Closed user group. This feature depends on the nature of your CUG subscription.•Default group: enable the default CUG, if you have set one with your service provider. When making a call, you are given the option of using your default CUG, instead of selecting one from the list.•Group index: add, delete, or activate CUG index numbers. Video call (OK 9.5.7)Use this menu to change the default settings for using the video call feature.•Show me: change the video camera settings for receipt of video calls.Optionally: you can select whether or not the video camera is used each time you answer a video call.Always: the camera is always used.•Retry by: set how to retry when the phone fails to make a video call, by MMS or voice call.You can change the call barring password obtained from your service provider. From the call type list, press <Options> and select Change password.

71Menu functions Settings (OK 9)Connectivity(OK 9.6)Use this menu to set options for connection available on your phone.Bluetooth (OK 9.6.1) Using Bluetooth wireless, you can connect the phone wirelessly to other Bluetooth devices and exchange data with them, talk hands-free, or control the phone remotely.Bluetooth technology allows free wireless connections between all Bluetooth-compliant devices within a range of 10 metres. Since the devices communicate using radio waves, they do not need to be in line of sight to each other. Setting up the Bluetooth featureThe Bluetooth menu provides the following options:•Activation: activate or deactivate the Bluetooth feature.•My devices: search for connectable Bluetooth devices. See the next section.•My phone’s visibility: allow other Bluetooth devices to connect to your phone.•My phone’s name: assign a Bluetooth device name to your phone, which is then displayed on other devices.•Secure mode: determine if the phone asks for your confirmation when other devices access your data.•Bluetooth service: display available Bluetooth services. Searching for and pairing with a Bluetooth device1. From the Bluetooth setting options, select My devices.2. Select Search new device.After searching, a list of devices to which you can connect is displayed. The following icons indicate the type of device:• Hands-free or headset• Mobile phone• Computer• PDA• Unknown deviceThe colour of the icon indicates the status of the device:• Grey for unpaired devices• Blue for paired devices• Red for devices that are currently connected to your phone• It is recommended that you don’t use the Bluetooth feature while using multimedia features such as voice recorder, camera, and Media player, or vice versa, for a good performance.• Some devices may not be compatible with your phone.

Menu functions723. Select a device.4. Enter a Bluetooth PIN code and press <OK>. This code is used just once and you don’t need to memorise it.When the owner of the other device enter the same code, pairing is finished.Using device optionsFrom the device list, press <Options> to access the following options:•Connect: connect to the currently selected device. You need to enter the Bluetooth PIN.•Disconnect: end the connection with the device.•Browse device: search for data from the selected device and import data directly to your phone.•Authorised device/Unauthorised device: determine if the phone asks you to permit connection when other devices try to connect to your phone.•Delete: delete the device or all devices.•Rename: rename the selected device.Sending data via Bluetooth1. Activate the Bluetooth feature.2. Select the application in which the item you want to send is stored. 3. Scroll to the item and press <Options>.4. Select Send → Via bluetooth.The phone searches for devices within range and displays a list of available devices.5. Select a device.6. If necessary, enter the Bluetooth PIN needed for pairing and press <OK>.Receiving data via BluetoothTo receive data via Bluetooth, your phone’s Bluetooth feature must be active.If an unauthorised Bluetooth device sends data to your phone, the phone displays a confirmation message. To receive data, press <Yes>.Infrared (OK 9.6.2) Use this feature to send and receive data through the infrared port. To use an infrared connection, you must do the following:• Configure and activate an IrDA-compliant infrared port on the other device.• Activate the infrared feature on your phone; select Infrared → On.Some devices, especially headsets or hands-free car kits, may have a fixed Bluetooth PIN, such as 0000. If the other device has one, you must enter the code.

Menu functions76Change phone password(OK 9.8.5)Use this menu to change your phone password. The password is preset to 00000000.Privacy lock(OK 9.8.6)Use this menu to lock your messages, media contents, contacts, and call logs. 1. Press [OK] to check the item(s) to lock. 2. Press <Save> to lock the marked items.3. Enter the phone password and press <Confirm>.To access a locked item, you need to enter the phone password.Change PIN code(OK 9.8.7)Use this menu to change your PIN. The PIN lock feature must be enabled to use this feature.Change PIN2 code(OK 9.8.8)If supported by your USIM/SIM card, the Change PIN2 feature changes your current PIN2. Memory status(OK 9.9) Use this menu to check the amount of memory being used for storing data, such as SMS, MMS, Email, Push messages, File manager, Contacts, and Organiser items. You can also view the amount of shared memory or a memory card.Reset settings(OK 9.0) Use this menu to reset the phone to its default settings.1. Enter the phone password and press <Confirm>.2. Press <Yes>. The phone automatically turns itself off and then back on.The password is preset to 00000000. You can change this password p. 75

77Solve problemsHelp and personal needsTo save the time and expense of an unnecessary service call, perform the simple checks in this section before contacting a service professional.When you switch on your phone, the following messages may appear:“Please insert SIM card”• Be sure that the USIM/SIM card is correctly installed.“Phone lock”• The automatic locking function has been enabled. You must enter the phone’s password before you can use the phone.“PIN lock”• You are using your phone for the first time. You must enter the PIN supplied with the USIM/SIM card.• The PIN lock feature is enabled. Every time the phone is switched on, the PIN has to be entered. To disable this feature, use the PIN lock menu.“PUK lock”• The PIN code was entered incorrectly three times in succession, and the phone is now blocked. Enter the PUK supplied by your service provider.“No service,” “Network failure,” or “Not done” displays• The network connection has been lost. You may be in a weak signal area. Move and try again.• You are trying to access an option for which you have no subscription with your service provider. Contact the service provider for further details.You have entered a number but it was not dialled• Be sure that you have pressed [ ].• Be sure that you have accessed the right cellular network.• Be sure that you have not set an outgoing call barring option.Your correspondent cannot reach you• Be sure that your phone is switched on. ([ ] pressed for more than one second.) • Be sure that you are accessing the correct cellular network.• Be sure that you have not set an incoming call barring option.Your correspondent cannot hear you speaking• Be sure that you have switched on the microphone.• Be sure that you are holding the phone close enough to your mouth. The microphone is located at the bottom of the phone.

78The phone starts beeping and “Low battery” flashes on the display• Your battery is insufficiently charged. Recharge the battery.The audio quality of the call is poor• Check the signal strength indicator on the display ( ). The number of bars indicates the signal strength from strong ( ) to weak ( ).• Try moving the phone slightly or moving closer to a window if you are in a building.No number is dialled when you re-call a Phonebook entry• Use the contact search feature to ensure the number has been stored correctly.• Re-store the number, if necessary.The battery doesn't charge properly or the phone sometimes turns itself off• Wipe the charging contacts both on the phone and on the battery with a clean soft cloth.If the above guidelines do not help you to solve the problem, take note of:• The model and serial numbers of your phone•Your warranty details• A clear description of the problemThen contact your local dealer or Samsung after-sales service.Health and safety information

79Health and safety informationExposure to Radio Frequency (RF) SignalsCertification Information (SAR)Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. government. These FCC exposure limits are derived from the recommendations of two expert organizations, the National Counsel on Radiation Protection and Measurement (NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases, the recommendations were developed by scientific and engineering experts drawn from industry, government, and academia after extensive reviews of the scientific literature related to the biological effects of RF energy.The exposure limit set by the FCC for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of the rate of absorption of RF energy by the human body expressed in units of watts per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates a substantial margin of safety to give additional protection to the public and to account for any variations in measurements.SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.Before a new model phone is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC. Tests for each model phone are performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC. Body-worn operations are restricted to Samsung-supplied, approved, or non- Samsung designated accessories that have no metal and must provide at least 1.5 cm separation between the device, including its antenna (whether extended or retracted) and the user's body. Non-compliance with the above restrictions may result in violation of FCC RF exposure guidelines.NorthAmerica_Cingular_T-mobile.fm Page 79 Thursday, October 13, 2005 2:14 PM

80Health and safety informationThe FCC has granted an Equipment Authorization for this mobile phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. The maximum SAR values for this model phone as reported to the FCC are:1900• Head: 0.551 W/Kg.• Body-worn: 0.337 W/Kg.SAR information on this and other model phones can be viewed on-line at www.fcc.gov/oet/fccid. This site uses the phone FCC ID number A3LSGHZ310. Sometimes it may be necessary to remove the battery pack to find the number. Once you have the FCC ID number for a particular phone, follow the instructions on the website and it should provide values for typical or maximum SAR for a particular phone. Additional product specific SAR information can also be obtained at www.fcc.gov/cgb/sar.Consumer Information on Wireless PhonesThe U.S. Food and Drug Administration (FDA) has published a series of Questions and Answers for consumers relating to radio frequency (RF) exposure from wireless phones. The FDA publication includes the following information:What kinds of phones are the subject of this update?The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called “cell,” “mobile,” or “PCS” phones. These types of wireless phones can expose the user to measurable radio frequency energy (RF) because of the short distance between the phone and the user's head. These RF exposures are limited by Federal Communications Commission safety guidelines that were developed with the advice of FDA and other federal health and safety agencies. When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a person's RF exposure decreases rapidly with increasing distance from the source. The so-called “cordless phones,” which have a base unit connected to the telephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures well within the FCC's compliance limits.NorthAmerica_Cingular_T-mobile.fm Page 80 Thursday, October 13, 2005 2:14 PM

Health and safety information 81Do wireless phones pose a health hazard?The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radio frequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.What is FDA's role concerning the safety of wireless phones?Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radio frequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:• “Support needed research into possible biological effects of RF of the type emitted by wireless phones;• “Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and• “Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health.FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:• “National Institute for Occupational Safety and Health• “Environmental Protection Agency• “Federal Communications Commission• “Occupational Safety and Health Administration• “National Telecommunications and Information AdministrationThe National Institutes of Health participates in some interagency working group activities, as well.FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States NorthAmerica_Cingular_T-mobile.fm Page 81 Thursday, October 13, 2005 2:14 PM

82Health and safety informationmust comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones.FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the primary subject of the safety questions discussed in this document.What are the results of the research done already?The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of radio frequency energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to be pre-disposed to develop cancer in absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we don't know with certainty what the results of such studies mean for human health.Three large epidemiology studies have been published since December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phones RF exposures. However, none of the studies can answer questions about long-term exposures, since the average period of phone use in these studies was around three years.What research is needed to decide whether RF exposure from wireless phones poses a health risk?A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but ten or more years' follow-up may be needed to provide answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop - if they do - may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this measurement, such as the NorthAmerica_Cingular_T-mobile.fm Page 82 Thursday, October 13, 2005 2:14 PM

Health and safety information 83angle at which the phone is held, or which model of phone is used.What is FDA doing to find out more about the possible health effects of wireless phone RF?FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radio frequency energy (RF).FDA has been a leading participant in the World Health Organization international Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues.FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world.What steps can I take to reduce my exposure to radio frequency energy from my wireless phone?If there is a risk from these products - and at this point we do not know that there is - it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radio frequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure.• “If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna.Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use.What about children using wireless phones?The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radio frequency energy (RF), the measures described above would apply to children and NorthAmerica_Cingular_T-mobile.fm Page 83 Thursday, October 13, 2005 2:14 PM

84Health and safety informationteenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure.Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists. Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort. These systems reduce the absorption of RF energy in the head because the phone, which is the source of the RF emissions, will not be placed against the head. On the other hand, if the phone is mounted against the waist or other part of the body during use, then that part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements regardless of whether they are used against the head or against the body. Either configuration should result in compliance with the safety limit.Do wireless phone accessories that claim to shield the head from RF radiation work?Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone. Studies have shown that these products generally do not work as advertised. Unlike “hand-free” kits, these so-called “shields” may interfere with proper operation of the phone. The phone may be forced to boost its power to compensate, leading to an increase in RF absorption. In February 2002, the Federal trade Commission (FTC) charged two companies that sold devices that claimed to protect wireless phone users from radiation with making false and unsubstantiated claims. According to FTC, these defendants lacked a reasonable basis to substantiate their claim.What about wireless phone interference with medical equipment?Radio frequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of NorthAmerica_Cingular_T-mobile.fm Page 84 Thursday, October 13, 2005 2:14 PM

Health and safety information 85Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. FDA has tested wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a compatible phone and a compatible hearing aid at the same time. This standard was approved by the IEEE in 2000.FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the problem.Additional information on the safety of RF exposures from various sources can be obtained from the following organizations:• FCC RF Safety Program:http://www.fcc.gov/oet/rfsafety/• Environmental Protection Agency (EPA):http://www.epa.gov/radiation/• Occupational Safety and Health Administration's (OSHA): http://www.osha.gov/SLTC/radiofrequencyradiation/index.html• National institute for Occupational Safety and Health (NIOSH):http://www.cdc.gov/niosh/emfpg.html • World health Organization (WHO):http://www.who.int/peh-emf/• International Commission on Non-Ionizing Radiation Protection:http://www.icnirp.de• National Radiation Protection Board (UK):http://www.nrpb.org.uk• Updated 4/3/2002: US food and Drug Administrationhttp://www.fda.gov/cellphonesNorthAmerica_Cingular_T-mobile.fm Page 85 Thursday, October 13, 2005 2:14 PM

86Health and safety informationRoad SafetyYour wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold.When driving a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips:1. Get to know your wireless phone and its features, such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.2. When available, use a hands-free device. If possible, add an additional layer of convenience and safety to your wireless phone with one of the many hands free accessories available today.3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voice mail answer it for you.4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice and even heavy traffic can be hazardous.5. Do not take notes or look up phone numbers while driving. Jotting down a “to do” list or flipping through your address book takes attention away from your primary responsibility, driving safely.6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.7. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road.8. Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone!9. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.10. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency number.NorthAmerica_Cingular_T-mobile.fm Page 86 Thursday, October 13, 2005 2:14 PM

Health and safety information 87“The wireless industry reminds you to use your phone safely when driving.”For more information, please call 1-888-901-SAFE, or visit our web-site www.wow-com.comProvided by the Cellular Telecommunications & Internet AssociationOperating EnvironmentRemember to follow any special regulations in force in any area and always switch your phone off whenever it is forbidden to use it, or when it may cause interference or danger. When connecting the phone or any accessory to another device, read its user's guide for detailed safety instructions. Do not connect incompatible products.As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder).Using Your Phone Near Other Electronic DevicesMost modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Consult the manufacturer to discuss alternatives.PacemakersPacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker.These recommendations are consistent with the independent research and recommendations of Wireless Technology Research.Persons with pacemakers:• should always keep the phone more than 15 cm (6 inches) from their pacemaker when the phone is switched on.• should not carry the phone in a breast pocket.• should use the ear opposite the pacemaker to minimize potential interference.If you have any reason to suspect that interference is taking place, switch your phone off immediately.Hearing AidsSome digital wireless phones may interfere with some hearing aids. In the event of such interference, you may wish to consult your hearing aid manufacturer to discuss alternatives.Other Medical DevicesIf you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Switch your phone off in health care NorthAmerica_Cingular_T-mobile.fm Page 87 Thursday, October 13, 2005 2:14 PM

88Health and safety informationfacilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.Posted FacilitiesSwitch your phone off in any facility where posted notices require you to do so.Potentially Explosive EnvironmentsSwitch your phone off when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.Users are advised to switch the phone off while at a refueling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress.Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine.Emergency CallsThis phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user programmed functions, which cannot guarantee connection in all conditions. Therefore, you should never rely solely on any wireless phone for essential communications (medical emergencies, for example).Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers.To make an emergency call:1. If the phone is not on, switch it on.2. Key in the emergency number for your present location (for example, 911 or other official emergency number). Emergency numbers vary by location.3. Press[ ].If certain features are in use (call barring, for example), you may first need to deactivate those features before you can make an emergency call. Consult this document and your local cellular service provider.NorthAmerica_Cingular_T-mobile.fm Page 88 Thursday, October 13, 2005 2:14 PM

Health and safety information 89When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your phone may be the only means of communication at the scene of an accident; do not cut off the call until given permission to do so.Restricting Children's access to your PhoneYour phone is not a toy. Children should not be allowed to play with it because they could hurt themselves and others, damage the phone or make calls that increase your phone bill.FCC Notice and CautionsFCC NoticeThe phone may cause TV or radio interference if used in close proximity to receiving equipment. The FCC can require you to stop using the phone if such interference cannot be eliminated.Vehicles using liquefied petroleum gas (such as propane or butane) must comply with the National Fire Protection Standard (NFPA-58). For a copy of this standard, contact the National Fire Protection Association, One Battery march Park, Quincy, MA 02269, Attn: Publication Sales Division.CautionsChanges or modifications made in the radio phone, not expressly approved by Samsung, will void the user’s authority to operate the equipment.Only use approved batteries, antennas and chargers. The use of any unauthorized accessories may be dangerous and void the phone warranty if said accessories cause damage or a defect to the phone.Although your phone is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting, bending or sitting on it.Other Important Safety Information• Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device.• Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.• Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories.• For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If wireless equipment is improperly installed and the air bag inflates, serious injury could result.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.NorthAmerica_Cingular_T-mobile.fm Page 89 Thursday, October 13, 2005 2:14 PM

90Health and safety information• Switch your phone off before boarding an aircraft. The use of wireless phone in aircraft is illegal and may be dangerous to the aircraft's operation.• Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both.Product PerformanceGetting the Most Out of Your Signal ReceptionThe quality of each call you make or receive depends on the signal strength in your area. Your phone informs you of the current signal strength by displaying a number of bars next to the signal strength icon. The more bars displayed, the stronger the signal.If you're inside a building, being near a window may give you better reception.Understanding the Power Save FeatureIf your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated. If your phone is active, it periodically rechecks service availability or you can check it yourself by pressing any key.Anytime the Power Save feature is activated, a message displays on the screen. When a signal is found, your phone returns to standby mode.Understanding How Your Phone OperatesYour phone is basically a radio transmitter and receiver. When it's turned on, it receives and transmits radio frequency (RF) signals. When you use your phone, the system handling your call controls the power level. This power can range from 0.006 watts to 0.2 watts in digital mode.Maintaining Your Phone's Peak PerformanceFor the best care of your phone, only authorized personnel should service your phone and accessories. Faulty service may void the warranty.There are several simple guidelines to operating your phone properly and maintaining safe, satisfactory service.• Hold the phone with the antenna raised, fully-extended and over your shoulder.• Try not to hold, bend or twist the phone's antenna.• Don't use the phone if the antenna is damaged.• Speak directly into the phone's receiver.• Avoid exposing your phone and accessories to rain or liquid spills. If your phone does get wet, immediately turn the power off and remove the battery. If it is inoperable, call Customer Care for service.Availability of Various Features/Ring TonesMany services and features are network dependent and may require additional subscription and/or usage charges. Not all features are available for purchase or use in all areas. Downloadable Ring Tones may be available at an additional cost. Other conditions and restrictions may apply. See your service provider for additional information.NorthAmerica_Cingular_T-mobile.fm Page 90 Thursday, October 13, 2005 2:14 PM

Health and safety information 91Battery Standby and Talk TimeStandby and talk times will vary depending on phone usage patterns and conditions. Battery power consumption depends on factors such as network configuration, signal strength, operating temperature, features selected, frequency of calls, and voice, data, and other application usage patterns. Battery Precautions• Never use any charger or battery that is damaged in any way.• Use the battery only for its intended purpose.• If you use the phone near the network's base station, it uses less power; talk and standby time are greatly affected by the signal strength on the cellular network and the parameters set by the network operator.• Battery charging time depends on the remaining battery charge and the type of battery and charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery.• If left unused, a fully charged battery will discharge itself over time.• Use only Samsung-approved batteries and recharge your battery only with Samsung-approved chargers. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its life.• Extreme temperatures will affect the charging capacity of your battery: it may require cooling or warming first.• Do not leave the battery in hot or cold places, such as in a car in summer or winter conditions, as you will reduce the capacity and lifetime of the battery. Always try to keep the battery at room temperature. A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Li-ion batteries are particularly affected by temperatures below 0 °C (32 °F).• Do not short-circuit the battery. Accidental short- circuiting can occur when a metallic object (coin, clip or pen) causes a direct connection between the + and - terminals of the battery (metal strips on the battery), for example when you carry a spare battery in a pocket or bag. Short-circuiting the terminals may damage the battery or the object causing the short-circuiting.• Dispose of used batteries in accordance with local regulations. In some areas, the disposal of batteries in household or business trash may be prohibited. For safe disposal options for Li-Ion batteries, contact your nearest Samsung authorized service center. Always recycle. Do not dispose of batteries in a fire.NorthAmerica_Cingular_T-mobile.fm Page 91 Thursday, October 13, 2005 2:14 PM

92Health and safety informationCare and MaintenanceYour phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfill any warranty obligations and allow you to enjoy this product for many years.• Keep the phone and all its parts and accessories out of the reach of small children.• Keep the phone dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits.• Do not use the phone with a wet hand. Doing so may cause an electric shock to you or damage to the phone.• Do not use or store the phone in dusty, dirty areas, as its moving parts may be damaged.• Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside the phone, which may damage the phone's electronic circuit boards.• Do not drop, knock or shake the phone. Rough handling can break internal circuit boards.• Do not use harsh chemicals, cleaning solvents or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water solution.• Do not paint the phone. Paint can clog the device's moving parts and prevent proper operation.• Do not put the phone in or on heating devices, such as a microwave oven, a stove or a radiator. The phone may explode when overheated.• When the phone or battery gets wet, the label indicating water damage inside the phone changes color. In this case, phone repairs are no longer guaranteed by the manufacturer's warranty, even if the warranty for your phone has not expired. • If your phone has a flash or light, do not use it too close to the eyes of people or animals. This may cause damage to their eyes.• Use only the supplied or an approved replacement antenna. Unauthorized antennas or modified accessories may damage the phone and violate regulations governing radio devices.• If the phone, battery, charger or any accessory is not working properly, take it to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service.NorthAmerica_Cingular_T-mobile.fm Page 92 Thursday, October 13, 2005 2:14 PM

93IndexAABC mode, text input • 23Active folder • 68Alarm • 58Answeringcall • 24, 27second call • 25Anykey answer • 68Auto redial • 70BBacklight time, set • 68Barring, calls • 69Batterycharging • 7low indicator • 8precautions • 79Bluetoothreceiving, data • 72sending, data • 72settings • 71Broadcast messages • 47Browser, WAP • 39CCalculator • 38Call costs • 29Call recordsdialled • 29missed • 28received • 29Call time • 30Caller group • 32Caller ID • 69Callsanswering • 24, 27barring • 69diverting • 69holding • 25redialling • 24rejecting • 24waiting • 70Cameraphotos • 62videos • 64Characters, enter • 22Conference call • 27Configuration messages • 43Connect tone • 66Connection settings • 73Contactscopying • 33deleting • 31editing • 30, 31options • 30setting • 34speed-dialling • 32Converter • 38Creating messagese-mail • 42MMS with attachments • 42MMS • 41SMS • 41Creating organiseranniversaries • 59events • 59memos • 60tasks • 60DDeletingcontacts • 31e-mails • 46events • 60MMS messages • 45photos • 53, 64SMS messages • 44video clips • 66Delivery reports, message • 48Dialled calls • 29Displaybrightness • 68icons 10language • 67settings • 68Diverting, calls • 69DTMF tones, send • 26EE-mailscreating/sending • 42deleting • 46settings • 49viewing • 46Emergency calls • 82FFDN (Fixed Dialling Number) mode • 75File manager • 52File messenger • 42Folder tone • 66Forwardinge-mails • 46MMS messages • 44SMS messages • 44GGames • 56Greeting message • 68

94Index HHealth and safety • 78Holding, call • 25IIcons, description • 10Images, downloaded • 52Inbox, messagese-mail • 46MMS • 44SMS • 44web • 45Infrared, connect • 72International calls • 24Internet • 39Kkey tone volume • 66Keypad tonesselecting • 67sending • 26LLanguage, select • 67Last number, redial • 24LCD brightness • 68Lockingmedia contents • 76phone • 75SIM card • 75Loudspeaker • 26Low battery indicator • 8MMedia files • 52Media player • 34Memory statuscontacts • 34messages • 51phone • 76scheduled events • 61Message tone • 66MessagesCB • 47greeting • 68MMS with attachments • 42MMS • 41SMS • 41web • 45Minute minder • 66Missed alarm events • 61Missed calls • 28MMS messagescreating/sending • 41deleting • 45settings • 48viewing • 44Multi-party calls • 27Mutingkey tones • 26microphone • 26NName card • 33Namesentering • 22searching • 30Network selection • 73OOrganiser • 58Outbox, messages • 45Own number • 33PPasswordbarring • 70phone • 76Phonecare and maintenance • 83display • 10icons • 10locking • 75password • 76resetting • 76switching on/off • 8unpacking • 6Photosdeleting • 53, 64taking • 62viewing • 52PIN, change • 76PIN2, change • 76Power on/off tone • 66Privacy • 76Problems, solve • 77Profiles • 66RReceived calls • 29Received messagese-mail • 46MMS • 44SMS • 44web • 45Recordingvideos • 64voice memos • 36Rediallingautomatically • 70

95Indexmanually • 24Resetting phone • 76Ringtones, downloaded • 55Road safety • 80Roaming • 73SSafetyinformation • 78precautions • 1Sent messages • 45Shortcuts • 67Side key, set • 68SIM cardinserting • 7locking • 75SMS messagescreating/sending • 41deleting • 44settings • 48viewing • 44Sound setting • 66Sounds, downloaded • 56Speed-dial • 32Switching on/offmicrophone • 26phone • 8TTemplatesMMS • 47text • 47Text input mode, change • 22Text, enter • 22Tone connect • 66folder • 66keypad • 67message • 66minute minder • 66power on/off • 66VVideo callsmaking • 27setting • 70Video clipsplaying • 53recording • 64Voice memosdeleting • 37playing • 36recording • 36Voicemail server • 51WWaiting call • 70Wallpaperexternal display • 68main display • 68WAP browser • 39World time • 37