Download: Mirror Download [FCC.gov] Document ID 543158 Application ID wRFHIuDrg5bloZ3IRWWvIw== Document Description Users Manual Short Term Confidential No Permanent Confidential No Supercede No Document Type User Manual Display Format Adobe Acrobat PDF - pdf Filesize 76.33kB (954068 bits) Date Submitted 2005-05-18 00:00:00 Date Available 2005-07-02 00:00:00 Creation Date 2005-05-11 12:03:11 Producing Software Acrobat Distiller 6.0 (Windows) Document Lastmod 2005-05-11 12:11:51 Document Title Users Manual Document Creator PScript5.dll Version 5.2 Document Author: B1E8B4F6BCF6
* Depending on the software installed or Vodafone, some of the descriptions in this manual
may match from your phone.
* Depending on your country, your phone and accessories may appear different from
the illustrations in this manual.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-XXXXXA
English. 04/2005. Rev 1.0
SGH-ZV30
User’s Guide
Use road safety at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Be aware of special regulations
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger.
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories could
damage your phone and may be dangerous.
Water resistance
Sensible use
Qualified service
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Only qualified service personnel may repair your
phone.
Emergency calls
Important safety precautions
Your phone is not water-resistant. Keep it dry.
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
For more detailed safety information, see "Health
and safety information" on page 74.
Key in the emergency number for your present
location, then press
Keep your phone away from small children
Keep the phone and all its parts, including
accessories, out of the reach of small children.
About this Guide
•
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful
attention to the subsequent
information regarding safety or phone
features.
Indicates that you can get more
information on the referenced page.
→
Indicates that you need to press the
Navigation keys to scroll to the
specified option and then select it.
< >
Indicates a key on the phone. For
example, [ ]
Indicates a soft key, whose function is
displayed on the phone screen. For
example, <
3G
Your phone is capable of operating
in a 3G environment, allowing much
greater data transfer speed, video
streaming, and video conferencing.
Special features of your phone
•
Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
•
Media player
Play media files on your phone.
•
IrDA
Send and receive Phonebook and
Organiser data and media files via
an infrared port.
•
•
•
WAP browser
Access the wireless web and access
various services and current
information.
Get personal with photo caller
ID
See who’s calling you with their
very own photo displays.
Name card
Create name cards with your
number and profile whenever
introducing yourself to others use
this convenient electronic name
card.
•
Multimedia message service (MMS)
Deliver MMS messages with a combination of
text, images, and audio.
•
E-mail
Deliver e-mails with images, video, and audio
attachments.
•
Java
Enjoy Java™-based embedded
games and download new games.
•
Organiser
Keep track of your daily, weekly,
and monthly schedule.
•
Voice recorder
Record memos or sounds.
Special features of your phone
•
Bluetooth
Send photos, images, videos, and
other personal data, and connect to
other devices using free, wireless
Bluetooth technology.
Contents
Unpack
Make sure you have each item
Your phone
Buttons, features, and locations
Get started
14
Begin with your camera, games, WAP, and other special
features
Enter text
23
ABC, T9, Number, and Symbol mode
14
15
16
17
17
25
Advanced calling features
Menu functions
Install and charge the phone .............................. 7
Power on or off ................................................. 8
Keys and display ............................................... 9
Display ........................................................... 10
Access menu functions...................................... 11
Customise your phone ...................................... 12
Make/Answer calls............................................ 14
Use camera .....................................................
Play media files ...............................................
Play games .....................................................
Browse the web ...............................................
Use Contacts ...................................................
18
19
20
21
Call functions
First steps to operating your phone
Step outside the phone
Send messages ...............................................
View messages ................................................
Use Bluetooth wireless......................................
Use a memory card ..........................................
29
All menu options listed
Solve problems
73
Help and personal needs
Health and safety information
74
Index
81
Menu functions
To access Menu mode, press
1 Entertainment
in Idle mode.
p. 29
2 Vodefone live!
p. 30
3 Media player
p. 32
Music
Video
p. 32
p. 32
4 Camera
p. 34
5 Messaging
p. 38
p. 38
p. 39
p. 41
p. 41
p. 41
p. 42
p. 43
p. 43
p. 43
p. 44
p. 44
p. 47
Create message
Inbox
Drafts
Outbox
Sentbox
Email inbox
Call voicemail
Templates
Broadcast
Delete all
Settings
Memory status
6 My files
p. 47
9 Settings
p. 61
Pictures
Videos
Sound and Ringtones
Music
Games
Applications
Themes
Other documents
p. 47
p. 48
p. 50
p. 51
p. 51
p. 51
p. 51
p. 52
p. 61
p. 63
p. 64
p. 64
p. 66
p. 67
p. 67
p. 71
p. 72
p. 72
7 Organiser & Tools
p. 52
1 Vodafone
2 Applications
3 Alarms
4 Calendar
5 Voice memo
6 World clock
7 PIM sync
8 Calculator
9 Converter
10 Memory status
p. 52
p. 52
p. 52
p. 53
p. 55
p. 56
p. 56
p. 57
p. 58
p. 58
8 Contacts
p. 58
1 Contacts
2 Groups
p. 58
p. 60
Phone settings
Display settings
Messaging settings
Call settings
Contact settings
Calendar settings
Connectivity
Security
Memory status
Reset settings
Unpack
Your phone
Make sure you have each item
Buttons, features, and locations
Earpiece
Phone
Travel Charger
Menu access/
confirm key
Battery
PC Data Cable
Application
switch key
User’s Manual
You can obtain various accessories
from your local Samsung dealer.
The items supplied with your
phone and the accessories at
your Samsung dealer may vary,
depending on your country or
service provider.
Exterior
camera
lens
Interior
camera lens
Camera
key
Video call key
External
display
Navigation keys
Headset jack
Right soft key
Left soft key
Power On/Off/
Menu exit key
Volume keys
PC Link CD
Display
Dial key
Infrared port
Special
function keys
Alphanumeric keys
Delete key
Microphone
Memory
card slot
Get started
Install the battery.
Plug the charger into a standard AC wall outlet.
The LED on the charger indicates the charging
progress.
• Red: the battery is being charged.
• Green: the battery is completely charged.
• Orange: the battery is not correctly installed
or is operating at a too high or too low
temperature.
When the phone is completely charged (green
charger LED), unplug the charger from the
power outlet.
First steps to operating your phone
Plug the travel
charger into the
phone.
SIM card information
When you subscribe to a cellular network, you
receive a plug-in SIM (Subscriber Identity Module)
card loaded with your subscription details, such as
your PIN and available optional services. For 3G
services, you can purchase a USIM card.
Install and charge the phone
Remove the battery.
If the phone is already
on, first turn it off by
holding [ ].
Insert the USIM/SIM
card.
Make sure that the goldcoloured contacts on the
card face down into the
phone.
Get started
Remove the charger from the phone.
Power on or off
Power on
1. Open the phone.
2. Press and hold [
on the phone.
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the battery low message displays, and
• the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
] to turn
Do not turn on the
phone when
mobile phone use
is prohibited.
3. If necessary, enter the PIN
and press .
Power off
1. Open the phone.
2. Press and hold [
].
Keys and display
Key(s)
Key(s)
Description
Description
Ends a call.
Hold down to switch the phone on and off.
In Menu mode, cancel input and return
the phone to Idle mode.
Perform the function indicated on the
bottom line of the display.
Enter numbers, letters, and some special
characters.
In Idle mode, hold [1] down to access
your voicemail. Hold [0] down to enter an
international call number.
In Idle mode, accesses Menu mode.
In Menu mode, select a highlighted menu
option.
Makes a video call.
Enter special characters.
Hold [ ] down to activate or deactivate
the Silent profile. Hold [ ] down to enter
a pause.
Opens the application switch window to
open Call, Messages, and Vodafone
live! without exiting the current
application.
Adjust the phone volume.
In Idle mode, adjust the keypad tone
volume. With the phone closed, hold down
to activate the external display.
Makes or answers a call.
In Idle mode, retrieves the recent
numbers dialled, missed, or received.
Get started
In Idle mode, access menu options
directly.p. 63
In Menu mode, scroll through the menu
options.
(on the left)
Hold down to turn on the camera.
In Camera mode, switches the camera
(on the right) lens.
Deletes characters from the display and
selected item in an application.
Get started
Display
Layout
Icons
The display has three areas.
Icons
displays various icons.
Text and graphics
displays messages,
instructions, and
information you enter.
Soft key function
indicators
shows the current
functions assigned to
the two soft keys.
Icons
Received signal strength
Network connection status
•
: 2.5G network
•
: Calling in 2.5G network
• : 2.5G network is
unavailable
•
: 3G network
•
: Calling in 3G network
•
: 3G network is
unavailable
Active roaming feature
10
(continued)
New message; depending on
the message type, the
following icons may appear.
•
: SMS
•
: MMS or MMS with
attachments
•
: E-mail
•
: Voicemail
•
: WAP push
•
: Configuration message
Voice call in progress
Out of your service area; you
cannot send or receive voice
calls
Video call in progress
Out of your service area; you
cannot send or receive video
calls
Bluetooth feature is
activep. 68 When sending
data, this icon is blinking red
and blue.
Connected with a Bluetooth
headset or hands-free
IrDA port is activep. 69
Icons
Memory card inserted
(continued)
Connected with a computer
Synchronised with a phone
Browsing the Internet
Use the soft
keys
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current
role.
Get started
Connected to a secured web
page
Access menu functions
Inbox full; depending on the
message type, the following
icons may appear.
•
•
: SMS
: MMS or MMS with
attachments
•
: E-mail
•
: Voicemail
•
: WAP push
•
: Configuration message
Profile settingp. 62
•
: Normal
•
: Silent
•
: Car
•
: Meeting
•
: Outdoor
Battery power level
Press the left soft
key to access the
Messages menu.
Press the right soft
key to access the
Vodafone live!
menu.
In each main menu, one of the
most popular sub menu is
assigned to the left soft key.
This allows you to quickly
access the most popular
menus.
11
Get started
Customise your phone
Select an
option
1. Press the appropriate soft
key or
to access Menu
mode.
Display
language
2. Press the Navigation keys to
move to the next or previous
option.
3. Press , , or
to confirm the function
displayed or option
highlighted.
4. To exit, choose either of the
following methods:
• Press to move
up one level.
• Press [ ] to return to
Idle mode.
Use shortcuts
Press the number key
corresponding to the option you
want.
1. In Idle mode, press
and
select Settings → Phone
settings → Phone language
→ Screen text.
2. Select a language.
3. Press .
Call ringer
melody
You can change the call ringer by
changing the properties of the
currently active sound profile.
To change the profile properties:
1. In Idle mode, press
and
select Settings → Phone
profiles.
2. Scroll to the sound profile you
are using.
3. Press and select
Edit.
4. Select Voice call ringtone
and select a ringer for voice
calls.
5. Press .
12
6. Select Video call ringtone
and select a ringer for video
calls.
Silent mode
7. Press .
To change the sound profile:
1. In Idle mode, press
and
select Settings → Phone
profiles.
2. Scroll to the profile you want.
Idle mode
Wallpaper
Phone lock
You can protect the phone
against unauthorised use with a
phone password.
1. In Idle mode, press
and
select Settings → Security
→ Change phone
password.
3. Press and select
.
2. Enter the default password,
“00000000,” and press
.
You can set a wallpaper for the
idle screen.
3. Enter a new 4- to 8-digit
password and press
.
1. In Idle mode, press
and
select Settings → Display
settings → Wallpaper.
2. Press [Left] or [Right] to
scroll to an image box.
3. Select an image and press
.
Get started
8. Press and select
Save.
You can quickly activate the
Silent profile to avoid disturbing
other people.
Press and hold [ ] in Idle mode.
4. Enter the new password
again and press .
5. Select Phone lock.
6. Select Enabled.
7. Enter the password and press
.
13
Step outside the phone
Make/Answer calls
Make a call
Step outside the phone
Begin with your camera, games, WAP, and other special
features
To make a voice call:
1. Enter an area code and
phone number.
2. Press [
Use camera
].
3. To end the call, press [
].
Take a photo
To make a video call:
Answer a call
1. Enter an area code and
phone number.
2. Press [ ] to switch between
the interior lens and exterior
lens.
2. Press [ ], and the other
person appears on the
screen.
3. Aim the camera lens at the
subject and adjust the image.
3. To end the call, press [
14
4. Press
to take a photo. The
photo is saved automatically.
1. When the phone is ringing,
press [ ] or .
2. For a video call, press
to allow the
other person to see you.
Adjust the
volume during
a call
1. In Idle mode, press and hold
[ ] to turn on the camera.
Press [ / ].
].
5. Press to take
another photo.
View a photo
1. In Idle mode, press
and
select My files → Pictures.
2. Select the photo you want.
Record a video
1. In Idle mode, press and hold
[ ] to turn on the camera.
2. Press [1] to switch to Record
mode.
Play media files
Use these methods:
• Download from the wireless
webp. 30
• Download from a computer
using EasyStudio II
EasyStudio User’s Guide
• Copy files to an optional
memory card and insert the
card into the phone.
• Receive via IrDA or
Bluetoothp. 69, p. 67
Create a play
list
1. In Idle mode, press
select Media player.
3. Press [ ] to switch between
the interior lens and exterior
lens.
4. Press
to start recording.
5. Press
to stop recording.
The video is automatically
saved.
6. Press to record
another video.
Play a video
1. In Idle mode, press
and
select My files → Videos.
2. Select the video you want.
Step outside the phone
Copy media
files to the
phone
and
2. Press and select
Open play list.
3. Press and select
Add → Folder or Files.
4. Check the files you want or
scroll to the folder you want.
5. Press or .
15
Step outside the phone
Play media files
1. From the Media player
screen, press
2. Select the file you want.
3. During playback, use the
following keys:
•
: Pauses or resumes
playback.
• Up: Opens the play list.
• Left: Goes to the previous
file. Moves backward in a
file when held down.
• Right: Skips to the next
file. Skips forward in a file
when held down.
•
/ : Adjusts the volume.
• Down: Stops playback.
Play games
Select a game
1. In Idle mode, press
and
select My files → Games →
the game you want.
2. Press any key except [
launch the game.
Play
Powerinlinex
1. Press .
2. Select a character.
3. Press to start a game.
Play
TheLastAge
1. Press .
2. Select New Game.
3. Press and then
.
4. Press .
16
] to
Browse the web
Use Contacts
Using a built-in WAP (Wireless Access Protocol)
browser, you can get easy access to the wireless
web to receive a variety of up-to-date information
and services and to enjoy downloads of web
contents.
In Idle mode, press <
Navigate the
web
•
•
•
•
>.
To scroll through browser
items, press [Up] or [Down].
To select an item, press
To return to the previous
page, press .
To use browser options, press
.
To the phone’s memory:
1. In Idle mode, enter a phone
number.
2. Press and select
Save contact to → Phone →
New → a number type.
Step outside the phone
Launch the
browser
Add an entry
3. Specify the contact
information: First name, Last
name, Email work, Email
home, Group, Homepage,
Birthday, and More
information (Job title,
Department, Company,
Nickname, and Notes).
4. Press and select
Save to save the entry.
To the USIM/SIM card:
1. In Idle mode, enter a phone
number.
2. Press and select
Save contact to → SIM →
New.
3. Specify the contact
information: Name, Phone
number, Group, and Location.
4. Press
to save the entry.
17
Step outside the phone
Find an entry
1. In Idle mode, press
select Contacts.
and
2. Select an entry.
3. Select a number and press
[ ] to dial, or to
access options.
Create and
send your
name card
1. In Idle mode, press
select Contacts.
Send messages
1. In Idle mode, press <
Send a text
and select Create message
message (SMS)
→ SMS.
2. Enter the message text.
3. Press
and
5. Press
to send the
message.
2. Specify your contact
information.
3. Press and select
Save to save the name card.
4. To send the name card to
other people, access the My
contact details menu again.
5. Press and select
Send contact details → the
sending method you want.
4. Enter destination numbers.
Send a
multimedia
message
(MMS)
1. In Idle mode, press <
and select Create message
→ MMS.
2. Enter the message subject.
3. Select Text.
4. Enter the message text and
press
5. Select Picture or Audio.
6. Add a media file.
7. Press and select
Send.
8. Enter destination numbers or
e-mail addresses.
9. Press
to send the
message.
18
Send an e-mail
1. In Idle mode, press <
and select Create message
→ Email.
2. Enter the e-mail text.
View messages
View a text
message
From the Inbox:
1. In Idle mode, press <
and select Inbox.
5. Select images, sounds, name
cards, schedule items, or
tasks.
8. Enter the e-mail subject and
press
2. Select a text message (
View a
multimedia
message
).
When a notification appears:
1. Press .
2. Press and select
Retrieve.
9. Enter e-mail address.
3. Select a message from the
Inbox.
10. Press
From the Inbox:
to send the e-mail.
Step outside the phone
4. Press and select
Add files, Add contact
details, or Add v-calendar.
7. Move the Subject line.
1. Press .
2. Select a message from the
Inbox.
3. Move to the Attach files line.
6. Press and select
Attach.
When a notification appears:
1. In Idle mode, press <
and select Inbox.
2. Select an MMS (
).
19
Step outside the phone
View an e-mail
1. In Idle mode, press <
and select Email inbox.
2. Press and select
Download.
Search for and
pair with a
Bluetooth
device
3. Select an e-mail or header.
2. Select a device.
4. If you selected a header,
press and select
Retrieve.
3. Enter a Bluetooth PIN code or
the other device’s Bluetooth
PIN code, if it has, and press
.
When the owner of the other
device enters the same code,
the pairing is complete.
Use Bluetooth wireless
Your phone is equipped with Bluetooth technology
which enables you to connect the phone wirelessly
to other Bluetooth devices and exchange data with
them, talk hands-free, or control the phone
remotely.
Turn on
Bluetooth
In Idle mode, press
and
select Settings → Connectivity
→ Bluetooth → Activation →
On.
1. In Idle mode, press
and
select Settings →
Connectivity → Bluetooth
→ My devices → Search
new device.
Send data
1. Access an application,
Contacts, My items, or
Organiser.
2. Select the item you want to
send.
3. Press and select
Send (name card) → Via
bluetooth.
4. Select a device.
5. If necessary, enter the
Bluetooth PIN and press
.
20
Receive data
To receive data via Bluetooth,
your phone’s Bluetooth feature
must be active.
If necessary, press to
confirm the reception.
Insert a
memory card
Use the memory card supplied
with your phone or ones
purchased from a Samsung
dealer.
1. Slide a memory card into the
memory card slot, with the
label side face down.
Step outside the phone
Use a memory card
•
You can use an optional memory card to enlarge
your phone’s memory capacity.
Important
memory card
information
•
•
•
•
•
•
Frequent erasing and writing will
shorten a memory card’s
lifespan.
Do not remove a memory card
from the phone or turn off the
phone while data is being
accessed or transferred. This
could result in loss of data and/
or damage to the card or phone.
Do not subject memory cards to
strong shocks.
Do not touch memory card
terminals with your fingers or
metal objects. If dirty, wipe the
card with a soft cloth.
Keep memory cards away from
small children or pets.
Do not expose memory cards in
a place subject to electro static
discharge and/or electrical
noise.
2. Press the card until it locks
into place.
21
Step outside the phone
Remove the
memory card
1. Press the memory card so
that it is disengaged from the
phone.
2. Slide the card out of the slot.
Use a card
adapter
Using an optional card adaptor
and a USB card reader/writer,
you can read the card on a PC.
1. Insert an optional memory
card into a card adaptor, and
then the adaptor into a card
reader/writer.
2. Plug the USB connector into
the USB port on your PC.
22
Enter text
ABC, T9, Number, and Symbol mode
You can enter text for some features such as
Messages, Phonebook, or Organiser, using ABC
mode, T9 mode, Number mode, and Symbol mode.
Changing the text input mode
The text input mode indicator displays when the
cursor is in a text input field.
• Press and hold [ ] to switch between T9 (
and ABC (
) modes.
• Press [ ] to change case (
) or
to switch to Number mode (
).
• Press and hold [ ] to switch to Symbol mode
).
Using T9 mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
Entering a word in T9 mode
1. Press [2] to [9] to start entering a word. Press
each key once for each letter.
For example, press [4], [3], [5], [5], and [6] to
enter Hello in T9 mode.
T9 predicts the word that you are typing, and it
may change with each key that you press.
2. Enter the whole word before editing or deleting
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [0] to display alternative word
choices for the keys that you have pressed.
For example, Of and Me use [6] and [3].
4. Press [ ] to insert a space and enter the next
word.
Tips for using T9 mode
• Press [1] to enter periods or apostrophes
automatically.
• Press [Left] or [Right] to move the cursor.
• Press [C] to delete characters one by one. Press
and hold [C] to clear the entire display.
Adding a new word to the T9 dictionary
This feature may not be available for some
languages.
1. Enter the word that you want to add.
2. Press [0] to display alternative words for your
key presses. When there are no more alternative
words, Spell displays on the bottom line.
3. Press .
4. Enter the word you want using ABC mode and
press .
23
Enter text
Using ABC mode
Using Number mode
Press the appropriate key until the character you
want appears on the screen.
Number mode enables you to enter numbers. Press
the keys corresponding to the digits you want.
Key
Characters in order displayed
Upper case
Lower case
Using Symbol mode
Symbol mode enables you to insert symbols.
To
Tips for using ABC mode
• To enter the same letter twice or to enter a
different letter on the same key, wait for the
cursor to move to the right automatically or
press [Right]. Then, enter the next letter.
• Press [ ] to insert a space.
• Press [Left] or [Right] to move the cursor.
• Press [C] to delete characters one by one. Press
and hold [C] to clear the entire display.
24
Press
display more symbols
[Up] or [Down].
select a symbol
the corresponding
number key.
clear the symbol(s)
[C].
insert the symbol(s)
.
Call functions
Advanced calling features
Making a call
1. In Idle mode, enter the area code and phone
number.
2. Press [ ].
• Press [C] to clear the last digit or press and
hold [C] to clear the whole display. You can
move the cursor to edit an incorrect digit.
• Press and hold [ ] to enter a pause between
numbers.
Making an international call
1. In Idle mode, press and hold [0]. The +
character appears.
2. Enter the country code, area code, and phone
number, then press [ ].
Redialling recent numbers
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press [ ].
Making a call from Contacts
Once you have stored a number in Phonebook, you
can dial the number by selecting it from
Phonebook.p. 58
You can also use the speed dial feature to assign
your most frequently called numbers to specific
number keys. p. 60
Dialling a number from the USIM/SIM card
1. In Idle mode, enter the location number for the
phone number you want and press [ ].
2. Find the number you want.
3. Press or [ ] to make a voice call, or
to make a video call.
Ending a call
Press [
] or close the phone.
Answering a call
When you receive an incoming call, the phone rings
and displays the incoming call image.
Press [
] or to answer the call.
Tips for answering a call
• When Anykey answer is active, you can press
any key to answer a call, except for [ ] and
.p. 63
• When Active folder is active, you can answer a
call by opening the phone.p. 63
• Press or [ ] to reject a call.
• Press [ / ] to reject a call or mute the ringer,
depending on the side key setting.p. 63
25
Call functions
Viewing missed calls
Placing a call on hold/Retrieving
If you have missed calls, the screen displays how
many calls you have missed.
1. Press .
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
Press or to place the call on
hold or retrieve the call.
Using the headset
Use the headset to make or answer calls without
holding the phone.
Connect the headset to the jack on the left side of
the phone.
The buttons on the headset work as listed below:
To
Press
redial the last call
the button twice.
answer a call
the button.
end a call
the button.
Options during a call
You can access a number of functions during a call.
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume during a
call.
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
26
Making a second call
You can make another call if your network supports
it.
1. Press to put the call on hold.
2. Make the second call in the normal way.
3. Press to switch between the calls.
4. Press and select End held call to
end the call on hold.
5. To end the current call, press [ ].
Answering a second call
You can answer an incoming call while already on
the phone, if your network supports it and you have
activated the call waiting feature.p. 66
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press to switch between the calls.
3. Press and select End held call to
end the call on hold.
4. To end the current call, press [ ].
Using the loudspeaker feature
Use the speaker feature to talk and listen with the
phone a short distance away. Press and
select Loudspeaker or press
Using a Bluetooth headset
Sending a text message
Use an optional Bluetooth headset to talk on the
phone without holding the phone to your ear. To use
this feature, you first need to register your headset
and connect it to the phone.p. 67
You can create and send a text message to other
people as well as to your current call participants.
Press and select Switch to headset.
Sending a sequence of DTMF tones
To switch the call back to the phone, press
and select Switch to phone.
Dual tone multi-frequency (DTMF) tones are the
tones used in phones for tone dialling.
You can temporarily switch off your phone’s
microphone so that the person on the phone cannot
hear you.
Press and select Mute.
To turn the microphone back on, press
and select Unmute.
Muting or sending key tones
You can turn the key tones off or on.
Press and select Mute key tone or
Unmute key tone.
To communicate with answering machines or
computerised telephone systems, Unmute key
tone must be selected.
Call functions
Switching off the microphone (Mute mode)
Press and select Send SMS.p. 38
You can send DTMF tones as a group after entering
the entire number you need to send or retrieving a
number from Phonebook. This feature is helpful for
entering a password or an account number when
you call an automated system, like a banking
service.
1. When connected with a teleservice system, press
and select Send DTMF.
2. Enter the number you need to send and press
.
Adding a memo
You can add a memo during a call.
Press and select Memo.p. 54
Using Phonebook
You can access the Contacts menu to locate or
store contacts in Phonebook.p. 58
Press and select Contacts.
27
Call functions
Making a multi-party call
Use this feature to allow as many as six people to
join a multi-party call, or conference call.
Vodafone must support multi-party calls for you to
use this feature.
Setting up a multi-party call
1. Call the first participant.
2. Call the second participant. The first call is
automatically put on hold.
3. Press and select Join. The first
participant is added to the multi-party call.
4. If desired, call another person or answer an
incoming call.
5. Press and select Join.
6. Repeat steps 4 and 5 as desired.
Having a private conversation with one
participant
1. Press and select Split.
2. Select a name or number from the participant
list.
You can talk privately with that person, while the
other participants converse with each other.
3. To return to the multi-party call, press
and select Join.
28
Dropping one participant
1. Press and select Drop call.
2. Select a name or number from the participant
list.
The participant is dropped from the call, but the
call continues with the other parties.
3. Press [ ] to end the multiparty call.
Using the video call feature
In a 3G (UMTS) service area, your phone can make
or receive a video call which allows you to see
another person on the screen during a conversation.
The other person’s phone must support the video
call feature.
Making a video call
1. In Idle mode, enter the area code and phone
number.
2. Press [ ].
Answering a video call
When you receive a video call, answer a video call as
receiving a voice call. Press to allow
the caller to see you.
Using video call options
During a video call, press to access the
following options:
• Loudspeaker/Loudspeaker off: turn the
Loudspeaker on or off.
•
•
•
•
•
•
•
•
•
•
•
Switch to headset/Switch to phone: switch
the call to a Bluetooth headset or back to the
phone.
Mute camera: turn off the camera.
Mute voice: mute the microphone.
Mute camera&voice: turn off the camera and
mute the microphone.
Mute key tone: mute key tones.
Zoom: display the zoom control bar.
Brightness: display the brightness control bar.
Effects: change the colour tone of the image.
Hide information/Show information: hide or
display information about the video call.
Send a sequence of DTMF: send Dual tone
multi-frequency (DTMF) tones as a group after
entering the entire number you need to send or
retrieving a number from Phonebook.
End call: end the video call.
Menu functions
All menu options listed
Entertainment
(Menu 1)
Use this menu to download Java games and play
them.
To access this menu, press
select Entertainment.
in Idle mode and
Playing Powerinlinex
1. From the Games & More menu, select
Powerinlinex.
2. Press any key except [ ].
3. Select PLAY or press .
4. Select a character.
5. Press to start a game.
During a game, press to access game
options.
Playing TheLastAge
1. From the Games & More menu, select
TheLastAge.
2. Press any key except [ ].
3. Select START GAME or press .
4. Select New Game or Load Game.
29
Menu functions
5. Press and then .
6. Press .
During a game, press to access game
options.
Downloading new games
1. Select More games.
2. Search for a game and follow the onscreen
instructions to download it.
Using Java game options
While viewing the game list, press to
access the following options:
• Download: connect the preset website.
• Start: launch the selected game.
• Permissions: set whether or not the phone
displays a security warning message when you
use security functions and reset the permission
setting.
• Details: access information about the selected
game.
• Delete folder: delete the selected game folder.
• Rename folder: change the name of created
game folder.
• Create folder: add a new game folder.
30
•
•
Network settings: activate a connection profile
to be used for accessing a Java server. You can
also make or edit a profile.p. 70
Memory status: display the amount of total and
used memory Java games.
Vodafone live!
(Menu 2)
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
Using the WAP browser, you can access up-to-theminute information and a wide variety of media
contents, such as wallpapers, ring tones, and music
files.
To access this menu, press
select Vodafone live!.
in Idle mode and
Go to homepage (Menu 2.1)
You can launch the WAP browser and access the
homepage of the WAP service provided by Vodafone.
Navigating the WAP browser
In the WAP browser:
To
Press
scroll through browser items
[Up] or [Down].
select a browser item
return to the previous page
.
Using browser menu options
Details: access information about the current
page.
Browser settings: change the settings for
multimedia, browser display, security, and
certificates.
Network settings: select a connection profile
to be used for connecting to the Internet. You
can also make or edit a profile.p. 70
Menu functions
Exiting the WAP browser
Press [
] to exit the browser.
Enter URL (Menu 2.2)
You can enter the URL of the WAP page you want in
order to quickly access the page.
Vodafone live! (Menu 2)
From any WAP page, press to access
the following browser options:
• Go to homepage: send you back to the
homepage.
• Enter URL: manually enter the URL address of
the web page you want to access.
• Reload: reload the current page with updated
information.
• Add favorite: add the current page to your
bookmark list.
• Favorites: access the bookmark list.
• History: show URLs previously visited.
• Send link: send the URL via SMS, e-mail, or file
messenger.
• Save: save the image of the current WAP page
or the current page.
• Advanced: clear browser information and
access the browser settings.
Search text: search for a specific word or
phrase from the current WAP page.
Clear history: delete the URLs stored in the
history.
Clear cookies: delete cookies.
Clear cache: delete information stored in the
cache.
Favorites (Menu 2.3)
You can add and manage the URLs of the WAP pages
you frequently access as bookmark item. You can
also manage URLs you have bookmarked while
navigating the Internet.
Adding a new bookmark
1. Press and select Favorite.
2. Enter a URL and press
3. Enter a name for the item and press .
4. Press
to save the item.
31
Menu functions
Using boomark options
Media player
From the bookmark list, press to access
the following options:
• Open: access the page of the selected
bookmark.
• Details: access the details of the bookmark
item.
• Send link: send the bookmark via SMS, e-mail,
or file messenger.
• New: add a new bookmark.
• Edit: change the selected bookmark.
• Delete: delete the selected bookmark or all
bookmarks.
Use this menu to enjoy media files, such as video
clips and music files. You can also play streaming
contents.
History (Menu 2.4)
You can access the list of pages you have accessed
recently.
Browser settings (Menu 2.5)
Use this menu to change the settings for
multimedia, browser display, security, and
certificates.
Network settings (Menu 2.6)
Use this menu to select a connection profile to be
used for connecting to the Internet. You can also
make or edit a profile.p. 70
(Menu 3)
To access this menu, press
select Media player.
in Idle mode and
Downloading or receiving media files
Use this method to save media files to your phone:
• Download from the wireless webp. 30
• Download from a computer using EasyStudio II
EasyStudio II User’s Guide
• Receive via IrDA or Bluetooth p. 69, p. 67
Creating the play list
Add the media files to the play list so you can play
them.
1. From the media player screen, press
2. Press and select Add.
3. Select Folder or Files.
4. Check the files you want or scroll to the folder
you want.
5. Press or .
Playing media files
1. From the media player screen, press
2. Select the file you want.
32
During playback, you can use the following keys:
Function
Left
Goes to the previous file. Moves backward
in a file when held down.
Right
Skips to the next file. Skips forward in a
file when held down.
Up
Opens the play list.
•
•
Pauses or resumes playback.
Adjusts the volume.
Stops playback.
Using media player options
From the Media player screen, press to
access the following options:
• Pause/Resume: pause or resume playback.
• Stop: stop playback.
• Send: send the file via MMS, Buletooth, or
infrared port.
• Open play list: go to the media file list.
• My videos: go to the Videos folder.
• Hidden from bluetooth: hide the selected file
so that other bluetooth devices cannot access it.
• Visible to bluetooth: share the selected file
with other Bluetooth devices.
• Show controller/Hide controller: display the
control bar of Media player.
Using play list options
Media player (Menu 3)
Down
•
Details: display details about the file.
Player settings: change the default settings for
playing media files.
Play options: select a repeat mode.
Volume: select a volume level.
Controller: display the control bar of Media
player.
Audio player: select a skin image.
VOD settings: select one of preset websites to
download media files.
Menu functions
Keys
From the Media player screen, press [Up] to access
the play list and press to access the
following options:
• Play: play the currently selected file.
• Add: add files or a folder to the play list.
• Remove: remove the selected file or all files
from the play list.
• Move: move the selected file to the position you
want within the current playlist or another play
list.
• Copy: make a copy of the selected file in the
current play list or another play list.
• Rename list: change the name of the play list.
• New list: add a new play list.
33
Menu functions
Camera
(Menu 4)
You can use the camera module embedded in your
phone to take photos and record videos. Using the
Camera menu, you can turn on the camera and
manage your photos and video clips.
•
Use the keypad to change the camera
settings or switch to other modes.p. 35
4. Press
to take a photo. The photo is saved in
the Pictures folder.
Hold the phone still for one or two seconds
after pressing the camera shutter key to allow
the image data to process.
To access this menu, press
in Idle mode and
select Camera or press and hold [ ] in Idle mode.
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras
are not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Taking a photo
The camera will produce JPEG photos.
When you take a photo in direct sunlight or in
bright conditions, shadows may appear on the
photo.
1. To turn on the camera, access the Camera menu
or press and hold [ ].
2. Press [ ] to switch between the interior lens
below the display and the exterior lens on the
external of the phone.
3. Adjust the image by aiming the lens at the
subject, as shown.
• Press to use the camera options.
See the next section.
34
5. To
Press
use photo options
.p. 36
delete the photo
[C] and then .
send the photo to
another person
return to Capture mode
.
Using camera options in Capture mode
In Capture mode, press to access the
following options:
• Take photo: take a photo.
• Record video: switch to Record mode.
• Switch camera: switch between the interior
lens and the exterior lens.
• My photos: display the photos stored in the
Pictures folder.p. 47
• Shooting mode: take a photo in the following
modes:
Single shot: take a photo in the normal mode.
Camera (Menu 4)
•
•
•
and change the exposure according to the
brightness of the image fragment in the frame.
ISO: change the ISO setting, which controls the
sensitivity of your camera. For low light
situations, lower the ISO number to increase the
quality.
The higher the ISO number, the faster the
camera shutter functions and the more sensitive
the camera is to light. Higher ISO settings may
bring some distortion to an image.
White balance: adjust the colour balance of the
photo. You can make your photo appear warmer
or cooler.
Menu functions
•
•
•
Multi shot: take several action stills. You can
select the number of shots.
Mosaic shot: take several stills and save them
in one frame. Select the number of still images
the camera will take.
Effects: change the colour tone of the image.
Frames: apply a decorative frame.
Timer: set a time delay before the camera takes
a photo.
Zoom: display the zoom control bar.
Brightness: display the brightness control bar.
Camera settings: change the default settings
for taking a photo.
Default name: change the default prefix of the
file name.
Default storage: select a memory location to
store photos.
Viewfinder: select a preview mode, either Full
Screen mode or Normal mode with actual radio.
Shutter sound: select a camera shutter sound.
Capture quality: select an image quality.
Image size: select an image size.
Multi shot speed: select the shutter speed
between each shot in Multi Shot mode.
Spot metering: adjust the exposure based on a
specific area of the image. Select On to display
the spot focus frame in the middle of the image,
Using the keypad in Capture mode
You can use the keypad to customise your camera
settings in Capture mode.
Key
Function
Flips the image vertically.
Shows the mirror image.
Left/
Right
Adjusts the image brightness.
Up/
Down
Zooms in or out.
Switches to Record mode.p. 36
Changes the image size.
35
Menu functions
Key
Function
Recording a video
Changes the image quality or switch to
the memory card where the photos are
saved.
Changes the shooting mode and the
number of photos for multi shots.
Changes the colour tone of the image.
Adds a decorative frame.
Sets the timer.
Goes to the Pictures folder.p. 47
You can use your phone just like a camcorder to
record what is currently displayed on the camera
screen and save it as a video file. The camera will
produce mp4 video clips.
1. To turn on the camera, access the Camera menu
or press and hold [ ].
2. Press [1] to switch to Record mode.
3. Press [ ] to switch between the interior lens
below the display and the exterior lens on the
external of the phone.
4. Adjust the image by aiming the lens at the
subject.
• Press to use the camera options.
See the next section.
• Use the keypad to change the camera
settings or switch to other modes.p. 37
5. Press
to start recording.
To pause, press .
6. When you have finished, press
. The video
automatically saves in the Videos folder.
Changes the preview mode.
Using photo options
After saving a photo, press to access
the following options:
• Viewfinder: return to Capture mode.
• Send: send the photo via MMS, Bluetooth, or
infrared port.
• Delete: delete the photo.
• Set as: set the photo as your wallpaper for main
or external display, or as a caller ID image for a
Phonebook entry.
• My photos: display the photos stored in the
Pictures folder.p. 47
• Rename: change the name of the photo.
36
7. To
play back the video clip
Press
use the video options
.p. 37
delete the video clip
[C] and then .
return to Record mode
.
Using the keypad in Record mode
Key
Function
Flips the image vertically.
Shows the mirror image.
Left/Right
Adjusts the image brightness.
Zooms in or out.
Switches to Capture mode.p. 34
Changes the frame size.
Changes the image quality
Changes the video recording mode.
Changes the colour tone of the
image.
Record audio with a video clip.
Goes to the Videos folder.p. 48
Camera (Menu 4)
Up/Down
Menu functions
Using camera options in Record mode
In Record mode, press to access the
following options:
• Record: start recording.
• Take photo: switch to Capture mode.
• Switch camera: switch between the interior
lens or exterior lens.
• My videos: display the video clips stored in the
Videos folder.p. 48
• Effects: changes the colour tone of the image.
• Zoom: display the zoom control bar.
• Brightness: display the brightness control bar.
• Video settings: change the following settings
for recording a video:
Default name: change the default prefix of the
video name.
Default storage: select a memory location to
store video clips.
Quality: select an image quality.
Recording time: select a video recording mode.
Select Normal to record a video within the limit
of the currently available memory. The length of
your video is determined by how much memory
has been used.
Select Limit for MMS to record a video suitable
for an MMS message.
Size: select an image size.
Audio record: record audio with a video clip.
Using video options
After saving a video clip, press to access
the following options:
• Play: play back the video clip.
• Viewfinder: return to Record mode.
• Send: send the video clip via MMS, e-mail, file
messenger, Bluetooth, or infrared port.
• Delete: delete the video clip.
• My videos: display the video clips stored in the
Videos folder.p. 48
• Rename: change the name of the video clip.
37
Menu functions
Messaging
(Menu 5)
Use the Messaging menu to send and receive short
text messages, multimedia messages, and e-mails.
You can also use WAP push message, Voice mail
features.
To access this menu, press
in Idle mode and
select Messaging or press < > in Idle mode.
Create message (Menu 5.1)
Use this menu to create and send text messages,
multimedia messages, or e-mails.
Messages (Menu 5.1.1)
Multimedia Message Service (MMS) delivers
messages containing a combination of text, image,
video, and audio, from phone to phone or from
phone to e-mail.
1. Enter the message subject.
2. Select the Text line.
3. Enter the message text and press
4. Select the Picture or Audio line.
5. Select an image or audio file and press .
The maximum size allowed for an MMS
message can differ depending on the country.
If you cannot attach another file, add another
page.
38
6. Press to access the following
options:
• Preview: display the message you created.
• Edit text: edit the added text.
• Change picture/Change sound: change
the added picture or sound to another one.
• Remove text/Remove picture/Remove
sound: delete the added text.
• Save to Drafts: save the message in the
Drafts box.
• Add page: add a page. Move to each page
by pressing [Left] or [Right] on the message
screen.
• Move page: move the current page to the
next or previous page.
• Delete page: delete the added page.
• Edit style: change the page profiles.
- This page: set the page duration and
change font colour and style for the
selected page.
- All page: change the background colour
and page layout.
• Save as template: save the message as a
template in the MMS templates folder.
7. When you have finished, press and
select Send.
8. Enter a phone number or e-mail address.
To send the message to more than one recipient,
press [Down] and fill in additional destination
fields.
9. Press
to send the message.
Inbox (Menu 5.2)
This folder stores all types of messages you have
received, except for e-mails, MMS, SMS, voicemail,
WAP push messages from the WAP server, and
configuration messages.
Configuration messages, which are sent from
Vodafone, contains network parameters to let you
easily apply the network settings to your phone.
Menu functions
Viewing a message at the time of its receipt
When a message has been received, the phone
alerts you by:
• Displaying a message icon and text notification
• Sounding or vibrating, depending on the
message alert setting
Messaging (Menu 5)
Email (Menu 5.1.3)
You can send and receive e-mails that include text,
audio, and images. To use this feature, you need to
subscribe to an e-mail service and set up your
e-mail account.p. 46
1. Enter the e-mail text.
2. Select the Attach files line.
3. Scroll to a media file folder and press
to
check files.
4. Press and select Attach.
5. Press to access the following
options:
• Attached file list: display the file list you
attached.
• Add contact details: add a contact as a
Vcard format.
• Add v-calendar: add a calendar memo.
• Save to Drafts: save message in the Drafts
box.
6. When you have finished, press and
select Send.
7. Enter an e-mail address.
To send the e-mail to more than one recipient,
press [Down] and fill in additional destination
fields.
8. Press
to send the e-mail.
To read a message immediately, press and
select a message from the Inbox. To read it later,
press .
For an MMS message, press and select
Retrieve. The message is downloaded from the
MMS server to the phone’s memory.
Viewing a message in Inbox
On the message list, the following icons are
available; depending on the message type.
•
SMS
•
•
MMS notification
•
MMS
Configuration
•
WAP push
•
Voice mail
•
Cell broadcast
39
Menu functions
• Depending on the DRM (Digital Right
Management), you may not be able to forward
some messages. They are indicated by the
icon.
• An ! icon shows that a message was sent with
high priority. A grey icon means that the
message is of low priority.
While viewing the message list, press to
access the following options:
• View: display the message.
• Reply: send a reply to the sender.
• Reply all: send a reply to the sender and all
recipients.
• Forward: forward the message to other people.
• Install: apply the configuration value in the
message to the phone.
• Sort by: change the sort order in the message
list.
• Retrieve: retrieve the MMS message from the
server.
• Reject: reject the message.
• Delete: delete the message or all messages.
• Details: access information about the message.
Using message options
While viewing a message, press to
access the following options:
40
SMS messages
• Reply: reply to the sender.
• Forward: forward the message.
• Save contact to: extract phone numbers or
e-mail addresses from the message and save
them in Phonebook.
• Move to SIM/phone: move the message
between the phone’s memory and the USIM/SIM
card.
• Delete: delete the message.
MMS notifications/messages
• Retrieve: retrieve the message from the server.
This option is only available when you select a
MMS notification.
• Play: play the message.
• Reply: send a reply to the sender.
• Reply all: send a reply to the sender and all
recipients.
• Forward: forward the message to another
person.
• Save as template: save the message as a
template in the MMS templates folder.
• Save media items: save media items from the
message into your phone’s memory.
• Save contact to: extract phone numbers or
e-mail addresses from the message and save
them in Phonebook.
• Delete: delete the message.
• Details: access information about the message.
WAP push messages
• Go to URL: connect to the URL specified in the
message.
• Delete: delete the message.
Drafts (Menu 5.3)
On the message list, press to access the
following options:
• View: open the selected message.
• Edit: edit the selected message.
• Send/Send again: send the message.
• Sort by: change the sort order of the message
list.
• Delete: delete the selected message.
• Delete all: delete all messages.
• Details: access information about the message.
While viewing the message list, press to
access the following options:
• View: display the selected message.
• Forward: forward the message to other people.
• Sort by: change the sort order of the message
list.
• Delete: delete the message.
• Delete all: delete all messages.
• Details: access information about the message.
Messaging (Menu 5)
This folder stores messages you have saved to send
them at a later time or tried to send while creating
the message.
This folder stores messages that you have failed or
tried to send.
Menu functions
Configuration message
• Install: apply the configuration value in the
message to the phone.
• Delete: delete the message.
Outbox (Menu 5.4)
Sentbox (Menu 5.5)
This folder stores messages that you have sent
successfully or tried to send.
While viewing the message list, press to
access the following options:
• View: display the selected message.
• Forward: forward the message to other people.
• Sort by: change the sort order of the message
list.
• Delete: delete the message.
• Delete all: delete all messages.
• Details: access information about the message.
41
Menu functions
Email inbox (Menu 5.6)
This folder stores e-mails that you have received.
Viewing received e-mails
1. From the e-mail folder, press .
2. Select Download to get new e-mails from your
server.
The phone checks for new e-mails and retrieve
received e-mails. The icons tell you the status of
each e-mail:
•
: Retrieved e-mail
•
: Retrieved e-mail with attachments.
•
: E-mail not retrieved
• Depending on the DRM (Digital Right
Management), you may not be able to
forward some messages. They are
indicated by the
icon.
• An ! icon shows that an e-mail was sent
with high priority. A grey icon means that
the e-mail is of low priority.
3. Select an e-mail or header.
4. If the e-mail has more than one page, press
[ / ] to scroll through pages one by one.
5. Select an attached file to view or play it.
Using e-mail options
While viewing the e-mail list or an e-mail, press
to access the following options:
• View: open the selected item.
42
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Retrieve: retrieve the body of the selected
e-mail header from the e-mail server.
Reply: send a reply to the sender.
Reply to all: send a reply to the sender and all
recipients.
Forward: forward the e-mail.
Download: retrieve new e-mails or headers
from the e-mail server.
Sort by: change the sort order of the message
list.
Save media items: save the files attached to
the e-mail in the phone’s memory or on the
memory card.
Save contact to: extract phone numbers or
e-mail addresses from the e-mail and save them
in Phonebook.
Block: add the sender’s e-mail address to the
Block number list.
Delete from phone selected: delete the
selected e-mail from the phone’s memory.
Delete from phone all: delete all e-mails from
the phone’s memory.
Delete permanently selected: delete the
selected e-mail from both the phone’s memory
and the e-mail server.
Delete permanently all: delete all e-mails from
both the phone’s memory and the e-mail server.
Details: access information about the e-mail.
Call voicemail (Menu 5.7)
Use this menu to access your voice mailbox, if your
network supports this service.
You can quickly connect to voice mail server by
pressing and holding [1] in Idle mode.
Use this menu to create, edit, and send text
templates and MMS templates.
From the MMS template list, press to
access the following options:
• View: open the template message.
• Send: send the template as an MMS message.
• Add new: add a new template.
• Edit: change the selected template.
• Delete: delete the template.
• Delete all: delete all templates.
Text templates (Menu 5.8.2)
Use this menu to preset frequently used messages.
Press to create a new text template.
Broadcast (Menu 5.9)
The Cell Broadcast service delivers short messages
on various topics, such as weather, sports, or traffic.
Use this menu to change the settings for the service
and to access broadcast messages.
• Read: open received messages.
The Temporary box saves network messages
until the phone is switched off.
The Archive box saves network messages
indefinitely. Press and select Save
to save messages to the Archive box when a
text notification appears.
• Receive: enable or disable the reception of
broadcast messages.
• Channel: specify the channels from which you
receive broadcast messages.
• Language: select the language in which
broadcast messages display.
Messaging (Menu 5)
MMS templates (Menu 5.8.1)
When you access this menu, you can view the list of
templates you have saved.
Add new: add a new template.
Edit: change the selected template.
Delete: delete the template.
Delete all: delete all templates.
Menu functions
Templates (Menu 5.8)
•
•
•
•
Please contact your service provider for details.
From the text template list, press to
access the following options:
• Send: send the template as an MMS, SMS, or
e-mail message.
43
Menu functions
Delete all (Menu 5.0)
Use this menu to delete all messages in each
message folder at once.
1. Press
to check the message box(es) you
want.
2. Press .
3. Press to confirm the deletion.
Settings (Menu 5. )
Use this menu to set up various options for using
messaging service.
44
MMS (Menu 5. .1)
You can configure default MMS settings.
• Sending options: set up the following options
for sending MMS messages:
Priority: set the priority level of your messages.
Expiration: set the length of time your
messages are stored in the MMS centre while
attempts are made to deliver them.
Delivery: set a time delay before messages are
sent.
Hide address: set your address to be hidden
from the recipient’s phone.
Request delivery report: set the network to
inform you when your message has been
delivered.
Request read report: determine whether or
not the phone sends a read-report request to a
message’s recipient.
•
Keep a copy: leave the copies of your messages
in the Sentbox folder after sending.
Receiving options: set up the following options
for receiving MMS messages:
Home network: determine if your phone
retrieves new messages automatically when you
are in your home service area.
Roaming network: determine if your phone
retrieves new messages automatically when you
are roaming in another network.
Home reception and Roaming reception have the
following options:
- Auto download: The phone automatically
retrieves messages from the server.
- Manual: The phone displays notifications. Use
the Retrieve option to manually download new
messages.
- Restricted: The phone displays a new
message icon without notifications when you
receive a new message.
- Reject: The phone rejects all messages.
Send delivery report: send a delivery report
from the network to a sender.
Send read report: determine whether or not
the phone sends a read-report to a sender.
Reject anonymous: reject messages from
anonymous senders.
Reject advertisement: reject advertisements.
•
•
SMS (Menu 5. .2)
You can configure default SMS settings.
• VODAFONE/Settings x: set the following
properties in a profile:
Centre address: store or change the number of
your message centre.
Expiration: set the length of time your
messages are stored in the SMS centre while
attempts are made to deliver them.
Default type: set the default message type. The
network can convert messages into the selected
format.
Name: enter a profile name.
Sending options: set up the following options
for sending an SMS message:
Reply path: allow the recipient to reply to you
through your SMS centre.
Delivery report: set the network to inform you
when your SMS has been delivered.
Network selection: select a preferred data
transmission method, either GSM (CS) or GPRS
(PS) network.
Keep a copy: leave the copies of your messages
in the Sentbox folder after sending.
Character support: select a character encoding
type. If you select Automatic, the phone
switches the encoding type from GSM-alphabet
to Unicode if you enter a unicode character. Use
of unicode encoding will reduce the maximum of
number in a message to about half. If this menu
is not shown, your phone provides the Automatic
encoding by default.
Messaging (Menu 5)
•
•
Menu functions
•
MMS profiles: select a connection profile to be
used for MMS. You can also make or edit a new
profile.p. 70
Message size: select the maximum file size of
MMS attachment. This file size may vary,
depending on your country.
Creation mode: select an MMS creation mode.
Warning: the phone informs you when you
create and send a message using unsupported
file formats.
Free: you can create and send a message using
unsupported file formats.
Restricted: you are not able to create and send
a message using unsupported file formats.
Slide interval: select a length of time the
display shows one page in a message.
Email (Menu 5. .3)
You can configure default e-mail settings.
• Sending options: set up the following options
for sending an e-mail:
From: set the sender name.
Sending account: select the default account.
Priority: change the priority level of your
e-mails.
Keep a copy: leave the copies of your e-mails in
the Sentbox folder after sending.
45
Menu functions
•
•
Include body when replying: set whether or
not the phone includes the original e-mail text in
a reply.
Delivery report: set the network to inform you
when your e-mail has been delivered.
Add my contact details: allow your contact
information to be attached to e-mails.
Add signature: attach your signature to emails.
Input signature: edit your signature.
Receiving options: set up the following options
for receiving an e-mail:
Set download limit: determine the maximum
size for incoming e-mails. Your phone will reject
e-mails that exceed the specified size.
Block address: specify e-mail addresses to
reject e-mails from those addresses.
Block subject: specify subjects to reject e-mails
which contain those subjects.
Email profiles: select a network connection
profile to be used for sending and receiving
e-mails. You can also make or edit a profile.
p. 70
You cannot change e-mail profile settings
while an e-mail is being sent or retrieved.
•
46
Email accounts: select an account to be used
and set up e-mail accounts. Press
and select Edit to access the following options:
Account name: enter a name for the currently
selected account.
SMTP server: enter the IP address or domain
name of the outgoing e-mail server.
SMTP port: enter the SMTP port number.
Use SSL: activate the use of the SSL (Secured
Sockets Layer) protocol.
Retrieving server type: select the protocol for
the incoming e-mail server. The remaining
options depend on the protocol type setting.
POP3 server/IMAP4 server: set the POP3 or
IMAP4 server address.
POP3 port/IMAP4 port: set the POP3 or IMAP4
port number.
Use SSL: activate the use of the SSL (Secured
Sockets Layer) protocol.
IMAP4 retrieving option: (only for IMAP
protocol): set whether the phone retrieves only
new messages or all messages.
Retrieving option: set which part of e-mails
the phone retrieves from the server.
Keep in server: set to leave the copies of
retrieved e-mails on the server.
My address: set your e-mail address.
User name: set the user name for SMTP/POP3/
IMAP4 server connection.
Password: set the password for SMTP/POP3/
IMAP4 server connection.
Voice mail (Menu 5. .4)
You can change the name or number of the
voicemail centre.
Memory status (Menu 5. )
Use this menu to view the memory status for SMS,
MMS, e-mail, and push message.
To access this menu, press
select My files.
in Idle mode and
As a result of the DRM (Digital Rights
Management) system, some of the media
items you download from the Internet or
receive by MMS may require a license key to
access them or forward them to other people.
You can acquire the key from the web site
which owns the rights to the content; use the
Activate key option in the item options.
My files (Menu 6)
Broadcast (Menu 5. .6)
You can configure default broadcast message
settings.
• Receiving options: enable or disable the
reception of broadcast messages.
• Channel list: specify the channels from which
you receive broadcast messages.
• Language select: select the language in which
broadcast messages are displayed.
(Menu 6)
The My files menu allows you to access images,
videos, ringtones, sounds, and other files stored in
the phone’s memory and the supplied memory card.
Menu functions
Push message (Menu 5. .5)
You can configure default web message settings.
• Whitelist update: reload the White list.
• Whitelist: create a White list.
• Blacklist: create a Black list.
• Service loading: set the phone to receive web
messages from the server.
My files
Pictures
This menu displays photos you have taken and
images downloaded or received in messages. You
can also edit a photo using various editing options.
Viewing an image
1. Press [Left] or [Right] to scroll to an image
folder.
2. Select an image.
3. Scroll through other images by pressing [Left] or
[Right].
Editing an image
1. Select the image you want.
2. Press and select Edit.
47
Menu functions
3. Change the properties of the photo using the
following editing options:
• Resize: change the image size.
• Effect: change the colour tone or apply a
special effect to the photo.
• Adjust: adjust the image brightness,
contrast, or colour balance.
• Frames: apply a decorative frame.
• Cliparts: add an image clip to the photo.
• Insert text: add text to the photo.
• Rotate: rotate the photo clockwise or
counterclockwise.
• Flip: flip the photo vertically or horizontally.
• Crop: select a variously sized and shaped
section of the photo.
4. When you have finished, press
5. Enter a photo name and press Save.
Using image options
While viewing the image list or an image, press
to access the following options:
• View: open the selected image.
• Send: send the image via MMS, Bluetooth, or
infrared port.
• Hidden from bluetooth: hide the image so that
other Bluetooth devices cannot access it.
• Visible to bluetooth: share the image with
other Bluetooth devices.
48
•
•
•
•
•
•
•
•
•
•
•
•
Set as: set the image as your wallpaper for the
main display or external display, or a caller ID
image for a Phonebook entry.
Move: move the image to another folder.
Copy: copy the image to another folder.
Real size: show the image in the real size.
Slide show: set all images to display as a slide
show.
Edit: change the image properties.
Delete: delete the image.
Rename: change the name of the image.
Details: access information about the image.
Lock: lock the image to keep it from being
deleted.
Create folder: add a new folder.
Memory status: access the memory
information for each folder in My items.
Downloading images
1. Press [Left] or [Right] to scroll to Downloads.
2. Select More pictures. You are connected to a
preset website.
3. Search for an image and follow the onscreen
instructions to download it.
Videos
This menu displays video clips you have recorded,
downloaded, or received in messages.
Playing a video clip
1. Press [Left] or [Right] to scroll to a video folder.
2. Select a video clip.
During playback, use the following keys:
Keys
Description
Opens the play list.
Left
Moves backward in a file when held
down.
Right
Skips forward in a file when held
down.
Down
Adjusts the volume.
Stops playback.
Using video options
While viewing the video clip list or a video clip, press
to access the following options:
• Play/Pause/Resume: play the selected video
clip, or pause or resume playback.
• Stop: stop playback.
• Add to play list: add the video clip to the play
list.
• Send: send the video clip via MMS, Bluetooth, or
infrared port.
• Open play list: open the play list.
•
•
•
•
•
•
•
•
•
•
•
My files (Menu 6)
Up
•
Hidden from bluetooth: hide the video clip so
that other Bluetooth devices cannot access it.
Visible to bluetooth: share the video clip with
other Bluetooth devices.
Move: move the video clip to another folder.
Copy: copy the video clip to another folder.
Delete: delete the selected video clip or all video
clips.
Rename: change the name of the video clip.
Lock: lock the video clip to keep it from being
deleted.
Details: access information about the image.
Create folder: add a new folder.
Memory status: access the memory
information for each folder in My items.
Show controller/Hide controller: show or
hide the control bar of Media player.
Player settings: change the default settings for
playing files.
Play options: select a repeat mode.
Volume: select a volume level.
Controller: show or hide the control bar of
Media player.
Audio player skin: select a skin image.
VOD settings: activate a connection profile to
be used for accessing a streaming server. You
can also make or edit a profile.p. 70
Menu functions
Pauses or resumes playback.
•
49
Menu functions
Downloading video clips
1. Press [Left] or [Right] to scroll to Downloads.
2. Select More videos.
3. Search for a video clip and follow the onscreen
instructions to download it.
•
Sounds and Ringtones
•
•
•
•
•
This menu displays sound clips you have
downloaded or received in messages.
Playing a sound file
1. Select a sound clip.
For MP3 files, refer to “Media player”.p. 32
2. During playback, use the following keys:
Keys
•
•
Description
•
Sends the selected file via MMS,
Bluetooth, or infrared port.
•
Left
Goes back to the previous file.
Right
Skips to the next file.
Up/Down
Adjusts the volume.
Using sound clip options
While viewing the sound list or playing a sound clip,
press to access the following options:
• Play: play the sound clip.
• Add to play list: add the sound clip to the play
list.
50
•
•
•
Send: send the sound clip via MMS, Bluetooth,
or infrared port.
Hidden from bluetooth: hide the sound clip so
that other Bluetooth devices cannot access it.
Visible to bluetooth: share the sound clip with
other Bluetooth devices.
Move: move the sound clip to another folder.
Copy: copy the sound clip to another folder.
Delete: delete all sound clips.
Rename: change the name of the sound clip.
Lock: lock the sound clip to keep it from being
deleted.
Set as ringtone: set the sound clip as your
ringer for voice calls or video calls.
Set as caller ID: set the sound clip as a caller
ID ringer for a Phonebook entry.
Details: access information about the sound
clip.
Create folder: add a new folder.
Memory status: access the memory
information for each folder in My items.
Downloading sound clips
1. Select More music.
2. Search for a sound files and follow the onscreen
instructions to download it.
Music
•
This menu displays music files you have
downloaded, or received in messages.
•
Playing a music files
Select a voice memo. The voice memo plays.
Keys
Description
Pauses or resumes playback.
Left
Moves forward in the voice memo.
Adjusts the volume.
Up
Switches to Record mode (
back to Play mode ( ).
Down
Stops playback.
•
•
•
) or
Using music file options
While viewing the voice memo list, or playing a voice
memo, press to access the following
options:
• Play/Resume: play the selected voice memo or
resume playback.
• Stop: stop playback.
• Record: record a new voice memo.
• Send: send the voice memo via MMS, Bluetooth,
or infrared port.
My files (Menu 6)
Right
Moves backward in the voice memo.
Menu functions
On the player screen, you can use the following
keys:
•
•
•
•
•
Hidden from bluetooth: hide the voice memo
so that other Bluetooth devices cannot access it.
Visible to bluetooth: share the voice memo
with other Bluetooth devices.
Move: move the voice memo to another folder.
Copy: copy the voice memo to another folder.
Delete: delete the voice memo.
Rename: change the name of the voice memo.
Lock: lock the voice memo to keep it from being
deleted.
Create folder: add a new folder.
Memory status: access the memory
information for each folder in My items.
Details: access information about the voice
memo.
Games
Use this menu to download Java games and play
them.
Applications
Use this menu to download applications.
Themes
This menu displays the wallpaper images you have
downloaded, or received in messages.
51
Menu functions
Changing a wallpaper image
1. Scroll to an image.
2. Press and choose Select.
Using wallpaper image options
While viewing the image list, press to
access the following options:
• Select: set the image as your wallpaper.
• Send: send the image via MMS, Bluetooth, or
infrared port.
• Delete: delete all images.
• Delete folder: delete the selected image folder.
• Rename folder: change the name of the image
folder.
• Create folder: add a new folder.
• Memory status: display the memory
information for each folder in My items.
Downloading wallpaper images
1. Select More themes.
2. Search for a wallpaper image and follow the
onscreen instructions to download it.
Other documents
Files that you have received but which are not
supported by your phone are stored in this folder.
You cannot open these files on the phone.
Unsupported file formats include *.doc, *.ppt, *.txt,
and so on.
52
Memory card
Use this menu to access the media files stored on
the memory card. This option is only available when
the memory card is inserted into the phone.
For details about using files, see the corresponding
menu.
Organiser & Tools
(Menu 7)
The Organiser feature enables you to create and
manage your schedule, anniversaries, tasks, and
memos.
To access this menu, press
select Organiser.
in Idle mode and
Vodafone (Menu 7.1)
If you use a USIM/SIM card that provides additional
services, the Vodafone menu displays.
For further details, see your USIM/SIM card
instructions.
Applications (Menu 7.2)
Use this menu to store applications downloaded.
Alarm (Menu 7.3)
Use this menu to set alarms to ring at specific times.
The alert type for a normal alarm corresponds to the
call alert type settings in the currently selected
profile. A wake-up alarm does not be affected by
your profile setting.
Set the repeat option.
Select the Alert tone line.
Select an alarm melody.
Press and select Save.
Stopping an alarm
When the alarm sounds, choose either of the
following options to stop the alarm:
• Press to confirm the alarm.
• Press to stop the wake-up alarm for
5 minutes. You can do this a maximum of 5
times.
Deactivating an alarm
1. Select the alarm you want to deactivate.
2. Select Off on the Alarm line.
Press and select Save.
Calendar (Menu 7.4)
Use this menu to keep track of your monthly
schedule.
Press to access the following options:
• View: display the stored events for that date.
• Add new: add a new event, anniversary, task,
or memo. You can schedule up to 100 schedule
items, 50 anniversaries, 20 tasks, and 20
memos on the calendar, and schedule more than
one event per day.
• Week view: display the week view screen.
• Go to today: display the current date.
• Go to day: display a specific date.
• Starting day: set whether the calendar starts
with Sunday or Monday.
• Delete: delete the events for the specified
period.
• Delete all: delete all events in the calendar.
Organiser & Tools (Menu 7)
4.
5.
6.
7.
Consulting the calendar
When you open the calendar, today’s date is marked
with a red box. Scroll to the date you want. You can
move to the next or previous month by pressing
[ / ]
Menu functions
Setting an alarm
1. Select the type of alarm.
2. Scroll to On on the Alarm line and press
[Down].
3. Enter the time for the alarm to sound and press
[Down].
Your phone is preset to a 24-hour format. You
can change the time format.p. 63
Entering a new schedule item
1. Select a date on the calendar.
2. Press and select Add new →
Schedule.
3. Press [Down] and enter information or change
the settings in the following entry fields:
• Title: enter the title of the event.
• Details: enter the event details.
53
Menu functions
•
Start and End: enter the starting and ending
times for the event.
• Start date and End date: enter the starting
and ending dates for the event.
• Location: enter information about the event
location.
• Alarm: select to set an alarm for the event
and set the time for the alarm.
• Repeat: select to set the event to recur. You
can select a repeat unit and set the date to
end repeating.
• Expiry: set when the event will be deleted
from the calendar.
4. Press and select Save.
Entering a new anniversary
1. Select a date on the calendar.
2. Press and select Add new →
Anniversary.
3. Press [Down] and enter information or change
the settings in the following entry fields:
• Occasion: enter information about the
anniversary.
• Date: enter the date.
• Alarm: select to set an alarm for the
anniversary. You can set the number of days
before the event date and the time for the
alarm to sound.
• Repeat every year: select to set the phone
to remind you of the anniversary every year.
4. Press and select Save.
54
Entering a task
1. Select a date on the calendar.
2. Press and select Add new → Task.
3. Press [Down] and enter information or change
the settings in the following entry fields:
• Title: enter the title for the task.
• Task: enter the task content.
• Start date: enter the starting date.
• Due date: enter the ending date.
• Priority: select a priority level.
4. Press and select Save.
Entering a memo
1. Press and select Add new → Memo.
2. Enter the memo text and press [Down].
3. Enter the date and press
4. Press and select Save.
Viewing an event
Square brackets on a calendar date indicate the type
of events scheduled for that day:
• Green: schedule
• Red: anniversary
• Blue: task
• Orange: memo
1. Select a date on the calendar to display the
events for that day. The list of events displays.
The following icons indicate the type of event:
•
Scheduled events •
Anniversaries
•
Tasks
Memos
•
2. Select an event to view its details.
Viewing a missed event alarm
1. From the Organiser menu, select Missed event
alarm.
2. Select an event.
3. Press to confirm and delete the
event.
Voice memo (Menu 7.5)
Use this menu to record voice memos.
Recording a voice memo
1. Press
to start recording.
2. Speak into the microphone.
Press
to pause or resume the recording.
3. When you finish, press . The voice
memo is automatically saved.
Organiser & Tools (Menu 7)
Missed event alarm
When you are unable to acknowledge an alarm for a
scheduled event or anniversary, the phone displays
a missed alarm notification.
• Press to view the corresponding event.
• Press .
Using missed alarm options
From the event list, press to access the
following options:
• View: display the missed event.
• Delete: delete the missed event.
• Delete all: delete all missed events.
Menu functions
Using event options
From the event list, press to access the
following options:
• View: access the selected event.
• Add new: add a new event.
• Completed: change the status of the selected
task.
• Month view: switch to the month view screen.
• Week view: switch to the week view screen.
• Change date/Change due date/Reschedule:
change the date of the event.
• Delete: delete the selected event.
• Delete all: delete all events for the selected day.
• Send schedule/Send task: send the event via
Bluetooth or infrared port.
Playing a voice memo
1. From the voice recorder screen, press
and select My sounds.
2. Select a voice memo. The memo plays.
On the player screen, you can use the following
keys:
keys
Function
starts playback.
Up
Switches to Play mode (
Record mode ( ).
Left
Moves backward.
) or back to
55
Menu functions
keys
Function
Right
Skips forward.
Down
Adjusts the volume.
Stops playback.
Using voice memo options
From the player screen, press to access
the following options:
• Play: play the voice memo.
• Resume: resume playback.
• Stop: stop playback.
• Record: record a new voice memo.
• Send: send the voice memo via MMS, e-mail,
file sender, Bluetooth, or infrared port.
• My sounds: display the list of voice memos you
have recorded.
• Rename: change the name of the voice memo.
• Delete: delete the voice memo.
• Hidden from bluetooth: hide the voice memo
so that other Bluetooth devices cannot access it.
• Visible to bluetooth: share the selected file
with other Bluetooth devices.
• Details: access information about the selected
voice memo.
• Record settings: change the default settings
for recording a voice memo.
56
Default name: change the default prefix of the
voice memo.
Recording time: select a maximum recording
time.
World clock (Menu 7.6)
Use this menu to set your local time zone and find
out what time it is in another part of the world.
Setting your local time zone
1. From the world map, press [Left] or [Right] to
select the city that corresponds to your home
time zone. As the time line moves, the time and
date of the given zone display.
2. Press
to save the time zone.
Viewing and setting a foreign time zone
1. From the world map, press [Down].
2. Press [Left] or [Right] to select the foreign time
zone you want to view.
3. Press
to save the time zone.
Applying Daylight Savings Time
1. From the world map, press and
select Summer time.
2. Press
to check the time zone(s) you want.
3. Press .
4. Press and select Save.
PIM sync (Menu 7.7)
•
Use this menu to synchronise personal data with
corresponding PC applications by using the
WideSync program supplied with your phone.
•
Using synchronisation options
From the PIM sync screen, press to
access the following options:
•
Calculator (Menu 7.8)
Use this menu to perform basic arithmetic functions
such as addition, subtraction, multiplication, and
division.
Organiser & Tools (Menu 7)
Starting synchronisation
1. Make sure that your PC has MS Outlook and the
WideSync program installed, and the phone and
the PC are connected by a USB cable or an active
Bluetooth connection.
2. Open MS Outlook.
3. From the PIM sync screen, select a profile.
4. Press [OK].
•
•
Menu functions
Creating a synchronisation profile
1. Press .
2. Specify the following information for the profile:
• Profile name: enter the profile name.
• Sync category: select the applications you
want to synchronise.
• Sync type: select a synchronisation type.
• Sync protocol: select a connection method.
3. Press to save the profile.
4. To create more profiles, press and
select New sync profile.
5. Repeat step 4 as desired.
Start sync: start a synchronisation for the
selected profile.
View result: show the result of the last
synchronisation.
New sync profile: add a new profile.
Edit sync profile: change the properties of the
profile.
Delete: delete the selected profile or all profiles.
Performing a calculation
1. Enter the first number.
Press [ ] to include a decimal point.
2. Enter the operation for your calculation by
pressing the Navigation keys.
3. Enter the second number.
4. Press
to view the result.
Using calculator options
Press to access the following options:
• Equal: view the result.
• Last result: display the last result you
calculated.
• Save to memory: save a value into the
calculator memory.
• Clear memory: clear the saved values.
57
Menu functions
Converter (Menu 7.9)
Contacts
Use this menu for common conversions, such as
currency and temperature.
You can store phone numbers on your USIM/SIM
card and in your phone’s memory. The USIM/SIM
card and phone’s memory are physically separate,
but they are used as a single entity called
Phonebook. In the Contacts menu, you can manage
your Phonebook entries.
Performing a conversion
1. Select the converter type you want.
2. Press [Left] or [Right] to select the original unit
and press [Down].
3. Enter the value to be converted.
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to
above zero (+) or below zero (-).
4. Press [Down].
5. Press [Left] or [Right] to select the unit you want
to convert to.
The equivalent value for the amount you entered
displays.
Using converter options
Press to access the following options:
• Clear: clear the current values.
• Reverse: reverse the conversion.
• Currency rates: display the currency rate list.
Memory status (Menu 7.0)
This menu displays the number of events of each
type you have created, and the total number of
events you can store.
58
(Menu 8)
To access this menu, press in Idle mode
and select Contacts.
Contacts (Menu 8.1)
Use this menu to search for numbers in Phonebook.
Finding an entry
1. Enter the first few letters of the name that you
want to find.
2. Select the name you want from the list.
3. Press [ ] to dial the number, or
to edit the
contact information.
Using contact options
While viewing the contact list, press to
access the following options:
• View: access the contact information.
• Edit: edit the contact information.
• Call: make a voice call.
• V-call: make a video call.
• Add new contact: add a new contact.
•
•
•
•
Add to speed dial: set the number as a speed
dial number.
Delete: delete the contact.
Search groups: access the caller group list.
Delete all: delete all contacts.
•
Paste: copy the number to the normal dialling
screen.
Delete: delete the contact.
Contacts (Menu 8)
Storing a number in the phone’s memory
1. Select Phone.
2. Press [Down] and change the settings or enter
information about the contact.
• First name/Last name: assign a name.
• Phone number: add a mobile phone
number.
• Email work: assign a business e-mail
address.
• Email home: assign a personal e-mail
address.
• Group: assign a caller group.
• Homepage: enter a homepage address.
• Birthday: enter the person’s birthday.
• More information: enter the job title,
department, company, nickname, and
additional note of the person.
3. Press and access the following
options to add additional information.
• Special options: assign a caller ID image, call
ringer, or message ringer for the contact.
• Add item: add a number category to the
contact.
• Change type: change the number type.
• Mark video call: set the selected number as a
video call number.
4. Press and select Save.
59
Menu functions
While viewing details of a contact, press
to access the following options:
• Edit: edit the contact information.
• Call: make a voice call.
• V-Call: make a video call.
• Send message: send an SMS or MMS message.
• Special options: set the following options:
Picture: assign a caller ID image to alert you to
a call from the number.
Ring tone: assign a ringer melody to alert you
to a call from the number.
Msg. alert tone: select a melody or tone to
alert you an incoming message from the number.
• Add to speed dial: set the selected number as
a speed dial number.
• Copy to SIM/Copy to phone: copy the number
to the phone’s memory or USIM/SIM card or vice
versa.
• Send contact details: send the contact via
Bluetooth or infrared port.
• Set as default: set the number as your default
number for the contact.
• Duplicate: duplicate the number.
•
Menu functions
Storing a number on the USIM/SIM card
1. Select SIM.
2. Press [Down] and change the settings or enter
information about the contact.
• Name: assign name.
• Phone number: enter a phone number.
• Group: assign a caller group.
• Location: assign a location number.
3. Press
to save the contact.
Groups (Menu 8.2)
Use this menu to organise your contacts in caller
groups.
Adding members to a caller group
1. Select a group.
2. Press
to check the contacts you want.
3. Press .
Managing caller groups
From the group list, press to access the
following options:
• View members: display the members of the
selected group.
• Add member: add contacts to the selected
group.
• Add group: add a new group.
• Rename group: change the group name.
• Delete group: delete the selected group.
60
•
Delete all groups: delete all groups including
default groups.
Speed dial (Menu 8.5)
Use this menu to assign speed dial numbers (2 to 9)
to eight of your most frequently called numbers.
Assigning speed dial entries
1. Select a key location from 2 to 9. Key 1 is
reserved for your voice mail server.
2. Select the contact you want from the contact list.
3. Scroll to a number, if it has more than one
number.
4. Press .
Managing speed dial entries
From the Speed dial screen, press to
access the following options:
• Assign: assign a number to an unassigned key.
• View: display details about the speed dial entry.
• Call: make a voice call.
• V-call: make a video call.
• Change: assign a different number to an
assigned key.
• Remove: clear the speed dial setting.
Dialling speed dial entries
Press and hold the appropriate key in Idle mode.
Saving your name card
The procedure for creating your name card is the
same as the one for saving a number in the phone’s
memory.p. 59
Use this menu to copy all of the contacts stored on
the USIM/SIM card to the phone’s memory, or vice
versa.
Settings (Menu 8.8)
Use this menu to change the default settings for
Phonebook entries.
• Viewing settings: select whether the contact
list is sorted by last name or by first name.
• Default storage settings: select a default
memory location to save contacts. If you select
Optionally, the phone will ask you to select a
memory location when saving a number.
Settings
(Menu 9)
Use this menu to customise your phone settings.
You can also reset the settings to their default
values.
To access this menu, press
select Settings.
in Idle mode and
Settings (Menu 9)
Copy all (Menu 8.7)
Use this menu to view the number of contacts you
have stored and total number of contacts you can
store in Phonebook.
Menu functions
Using name card options
After saving your name card, press to
access the following options:
• Edit: edit the name card.
• Send contact details: send the name card via
Bluetooth or infrared port.
• Delete: delete the name card.
Memory status (Menu 8.9)
Phone settings (Menu 9.1)
Many different features of your phone’s system can
be customised to suit your preferences.
Phone profiles (Menu 9.1.1)
Use this menu to adjust and customise the phone
tone for different events or situations.
Editing a profile
1. Scroll to the profile you want.
2. Press and select Edit.
3. Change the sound settings:
• Call alert type: press
and select an alert
type for the call ringer.
• Voice call ringtone: press
and select a
ring tone for the call ringer of voice calls.
61
Menu functions
•
•
•
•
•
•
62
Video call ringtone: press
and select a
ring tone for the call ringer of video calls.
Tone volume: adjust the volume for the call
ringer.
Msg. alert type: press
and select an
alert type for the message ringer.
Msg. alert tone: press
and select a ring
tone for the message ringer.
Msg. alert repetition: select if the phone
repeats reminding you of a new message.
Phone sounds: press
and turn the
various sounds on the phone on or off.
All on: enable all tones.
Popup box alerts: cause the phone to beep
when a pop-up window displays.
Minute minder: cause the phone to beep
every minute during an outgoing call to keep
you informed of the length of your call.
Call connect tone: cause the phone to beep
when a call is connected to the system.
Call end tone: cause the phone to beep
when a call is disconnected by the other
person or the faded signal.
Power on: cause the phone to beep when
you turn on the phone.
Folder open/close: cause the phone to
sound when you open or close the phone.
Alerts on call: cause the phone to beep
when you receive a new message or when
the time for an alarm comes during a call.
•
Key tones: press
and select a tone which
sounds when you press a key.
• Key tone volume: adjust the volume of the
key tones.
• Call answer mode (for Car): Press
and
select how to answer an incoming call when
the phone is connected to a hans-free car kit.
4. When you have finished, press and
select Save.
Changing an active profile
Select the profile you want.
Assign ringtone (Menu 9.1.2)
Use this menu to select a volume and alert type for
incoming calls.
• Call alert type: specify how you are to be
informed of incoming calls.
Melody: the phone rings using the selected ring
tone.
Vibration: the phone vibrates but not rings.
Vibration then melody: the phone vibrates
three times and then starts ringing.
• Voice call ringtone: select a ring tone for the
voice call ringer.
• V-call ringtone: select a ring tone for the video
call ringer.
• Tone volume: select a ringer volume.
Phone anguage (Menu 9.1.3)
Use this menu to select one of several languages for
the display text or T9 input mode.
Assigning a shortcut to a key
1. Select the key to be used as a shortcut key.
2. Select the menu that will be assigned to the key.
3. Press .
From the Shortcuts screen, press to
access the following options:
• Assign: assign a shortcut menu to an empty
location.
• Change: change a shortcut menu.
• Remove: deactivate the shortcut assignment to
the selected key.
• Remove all: deactivate all shortcut
assignments.
Time & date (Menu 9.1.5)
Use this menu to change the time and date
displayed on your phone. Before setting the time
and date, specify your time zone in the World clock
menu. p. 61
• Time: enter the current time.
• Date: enter the current date.
Side key (Menu 9.1.6)
Use this menu to set how the phone reacts when
you press [ / ] when a call comes in.
• Reject: the keys rejects the call.
• Silence: the keys mutes the call ringer.
Anykey answer (Menu 9.1.7)
Use this menu to answer an incoming call by
pressing any key, except [ ] or .
Settings (Menu 9)
Using the shortcut options
•
•
•
Time format: select a 12-hour or 24-hour time
format.
Date format: select a date format.
Summer time: activate daylight savings time.
Auto update: select to receive time information
from your network.
Menu functions
Shortcuts (Menu 9.1.4)
You can use the Navigation keys as shortcut keys to
access specific menus directly from Idle mode. Use
this menu to change these shortcut assignments.
•
Active folder (Menu 9.1.8)
Use this menu to answer incoming calls by opening
the phone.
Display settings (Menu 9.2)
Use this menu to change settings for the display.
Greeting message (Menu 9.2.1)
Use this menu to enter the greeting that is displayed
on the main display or external display.
Wallpaper (Menu 9.2.2)
You can change the background image that is
displayed on the main display in Idle mode.
63
Menu functions
External display (Menu 9.2.3)
Use this menu to change the settings for the
external display.
1. Select a display item type.
• Clock: you can select a clock type.
• Sub title: you can set a banner message.
• Wallpaper: you can change the wallpaper
image.
2. Select the image you want or enter the banner
message.
For Wallpaper, you can select a section of an
image.
3. Press or
4. Press .
Dialing display (Menu 9.2.6)
Use this menu to customise the settings for the
screen when entering a phone number for dialling.
• Font size: select a font size.
• Font colour: select a font colour.
• Background colour: select a background
colour.
LCD brightness (Menu 9.2.4)
Use this menu to adjust the brightness of the main
display.
All calls (Menu 9.4.1)
Use this menu to change the default settings for
using the call feature.
• Show my number: prevent your phone number
from being displayed on the phone of the person
being called.
some networks do not allow the user to
change this setting.
Backlight time (Menu 9.2.5)
You can select the length of time the backlight and
the display stay on.
On: select the length of time the backlight is on in
times of inactivity.
Dim: select the length of time the display is in
Dimming mode after the backlight turns off. After a
specified time, the display turns off.
64
Messaging settings (Menu 9.3)
Use this menu to change the default settings for
using the message feature. p. 44
Call settings (Menu 9.4)
Use this menu to set options for call functions.
By network: use the default setting provided by
the network.
Send: send your number each time you make a
call.
Hide: ensure your number does not display on
the other person’s phone.
•
Setting a call diverting option
This network service reroutes incoming calls to a
different phone number that you specify.
1. From the Voice call menu, select Diverts.
2. Select the type of calls to be diverted.
3. Select a call diverting option:
• Always: divert all calls.
• Busy: divert calls when you are on another
call.
Settings (Menu 9)
Voice call (Menu 9.4.2)
Use this menu to change the default settings for
using the voice call feature.
No reply: divert calls when you do not
answer the phone.
• Unreachable: divert calls when you are not
in an area covered by Vodafone or when your
phone is switched off.
• Cancel all: cancel all call diverting options.
4. Enter the number to which the calls will be
diverted in the Divert to line.
5. If you selected No reply, move to the Waiting
time line and select the length of time the
network delays before diverting a call.
6. Press and select Activate.
To deactivate the call diverting, select
Deactivate.
•
Menu functions
•
Closed user group: set incoming and outgoing
calls to be restricted to a selected user group.
For details about how to create a closed user
group, contact Vodafone.
Use user group: activate CUG index numbers.
Outside access: enable calls to numbers other
than those in the Closed user group. This feature
depends on the nature of your CUG subscription.
Default group: enable the default CUG, if you
have set one with Vodafone. When making a call,
you are given the option of using your default
CUG, instead of selecting one from the list.
Group index: add, delete, or activate CUG
index numbers.
Auto redial: make up to ten attempts to redial a
phone number after an unsuccessful call.
Setting a call restriction option
This network service allows you to restrict your calls.
1. From the Voice call menu, select Restrict
calls.
2. Select the type of calls to be barred.
3. Select a call restriction option:
• All outgoing calls: prohibit all outgoing
calls.
• Outgoing int’l calls: prohibit international
calls.
• Int’l calls exc. home: only allow calls to
numbers within the current country.
• All incoming calls: prohibit incoming calls.
65
Menu functions
•
Incoming calls when roaming: prohibit
incoming calls when you use your phone
outside of your home country.
• Cancel all: cancel all call barring settings,
allowing calls to be sent and received
normally.
4. Enter the call barring password.
5. Press and select Activate. To
deactivate the call barring, select Deactivate.
You can change the call barring password
obtained from Vodafone. From the call type list,
press and select Change password.
Setting a waiting call option
This network service informs you when someone is
trying to reach you while you are on another call.
1. From the Voice call menu, select Diverts.
2. Select the type of calls to which the call waiting
option will apply.
3. Press and select Activate. To
deactivate the call waiting, select Deactivate.
66
Video call (Menu 9.4.3)
Use this menu to change the default settings for
using the video call feature.
• Show my image: change the video camera
settings for receipt of video calls.
Optionally: you can select whether or not the
video camera is used each time you answer a
video call.
Always: the camera is always used.
•
•
•
•
Select still image: select an image to be
displayed on the other person’s phone.
Retry with: set how to retry when the phone
fails to make a video call, by MMS or voice call.
Diverts: reroute incoming calls to a different
phone number that you specify.p. 65
Restrict calls: restrict your calls.p. 65
Data call (Menu 9.4.31)
• Diverts: reroute incoming calls to a different
phone number that you specify.p. 65
• Restrict calls: restrict your calls.p. 65
• Waiting: set to inform you when someone is
trying to reach you while you are on another
call.p. 66
Contacts settings (Menu 9.5)
Use this menu to configure contact settings.
Speed dial (Menu 9.5.1)
Use this menu to assign speed dial numbers (2 to 9)
to eight of your most frequently called numbers.
Assigning speed dial entries
1. Select a key location from 2 to 9. Key 1 is
reserved for your voice mail server.
2. Select the contact you want from the contact list.
3. Scroll to a number, if it has more than one
number.
4. Press .
Managing speed dial entries
Calendar settings (Menu 9.6)
From the Speed dial screen, press to
access the following options:
• Assign: assign a number to an unassigned key.
• View: display details about the speed dial entry.
• Call: make a voice call.
• V-call: make a video call.
• Change: assign a different number to an
assigned key.
• Remove: clear the speed dial setting.
Use this menu to configure calendar settings.
Sort contacts by (Menu 9.5.2)
Use this menu to change the contact order by first
name or by last name.
Save new contacts to (Menu 9.5.3)
Use this menu to set the default memory location
when saving a new contact.
View contacts from (Menu 9.5.4)
Use this menu to set the default memory to be
displayed when accessing Phonebook.
Own number (Menu 9.5.5)
Use this feature to check your phone numbers, or to
assign a name to each of the numbers.
Changes made here do not affect the actual
subscriber numbers on your USIM/SIM card.
Connectivity (Menu 9.7)
Use this menu to set options for connection available
on your phone.
Settings (Menu 9)
Press and hold the appropriate key in Idle mode.
Default view mode (Menu 9.6.2)
Use this menu to select the default view mode when
entering the Calendar menu.
Menu functions
Dialling speed dial entries
Starting day (Menu 9.6.1)
Use this menu to set which day of the week the
calendar starts with.
Bluetooth (Menu 9.7.1)
Using Bluetooth wireless, you can connect the phone
wirelessly to other Bluetooth devices and exchange
data with them, talk hands-free, or control the
phone remotely.
Bluetooth technology allows free wireless
connections between all Bluetooth-compliant
devices within a range of 10 metres. Since the
devices communicate using radio waves, they do not
need to be in line of sight to each other.
• You cannot use the Bluetooth feature while
using multimedia features such as voice
recorder, camera, and Media player, or vice
versa.
• Some devices may not be compatible with your
phone.
67
Menu functions
Setting up the Bluetooth feature
The Bluetooth menu provides the following
options:
• Activation: activate or deactivate the Bluetooth
feature.
• My devices: search for connectable Bluetooth
devices.See the next section.
• My phone’s visibility: allow other Bluetooth
devices to connect to your phone.
• My phone’s name: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
• Secure mode: determine if the phone asks for
your confirmation when other devices access
your data.
• Bluetooth service: display available Bluetooth
services.
Searching for and pairing with a Bluetooth
device
1. From the Bluetooth setting options, select My
devices.
2. Select Search new device.
After searching, a list of devices to which you can
connect displays. The following icons indicate the
kind of device:
•
Hands-free or headset
•
Mobile phone
•
Computer
•
PDA
•
Unknown device
68
The colour of the icon indicates the status of the
device:
• Grey for unpaired devices
• Blue for paired devices
• Red for devices that are currently connected
to your phone
3. Select a device.
4. Enter a Bluetooth PIN code of up to 16 digits and
press . This code is used just once and you
don’t need to memorise it.
When the owner of the other device enter the
same code, pairing is finished.
Some devices, especially headsets or hands-free
car kits, may have a fixed Bluetooth PIN, such as
0000. If the other device has one, you must
enter the code.
Using device options
From the device list, press to access the
following options:
• Connect: connect to the currently selected
device. You need to enter the Bluetooth PIN.
• Disconnect: end the connection with the
device.
• Browse device: search for data from the
selected device and import data directly to your
phone.
• Authorise/Unauthorise device: determine if
the phone asks you to permit connection when
other devices try to connect to your phone.
•
•
Delete: delete the device or all devices.
Rename: rename the selected device.
To receive data via Bluetooth, your phone’s
Bluetooth feature must be active.
If an unauthorised Bluetooth device sends data to
your phone, the phone displays a confirmation
message.
To receive data, press .
Infrared (Menu 9.7.2)
Use this feature to send and receive data through
the infrared port. To use an infrared connection, you
must do the following:
• Configure and activate an IrDA-compliant
infrared port on the other device.
If there is no communication
between your phone and the
other IrDA-compliant device
within 60 seconds of activating
the feature, it is automatically
deactivated.
Synchronize (Menu 9.7.3)
Use this menu to synchronise personal data with
corresponding PC applications by using the
WideSync program supplied with your phone.
• Sync mode: set the phone to start
synchronisation automatically or manually.
• Sync frequency: select how often the phone
will synchronise.
• Sync direction: select which device is
synchronised.
• Allow server alerted sync: allow the server to
synchronise with your phone when asked or deny
the synchronisation request.
Network selection (Menu 9.7.4)
Use this menu to select to either automatically or
manually select the network used when roaming
outside of your home area. You can select a network
other than your home network only if there is a valid
roaming agreement between the two.
Settings (Menu 9)
Receiving data via Bluetooth
•
Activate the infrared feature on your phone;
select Infrared → On.
Align the IrDA port on the
phone with the IrDA port on
the other device.
Menu functions
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item you want
to send is stored.
3. Scroll to the item you want and press
.
4. Select Send → Via bluetooth.
The phone searches for devices within range and
displays a list of available devices.
5. Select a device.
6. If necessary, enter the Bluetooth PIN needed for
pairing and press .
•
69
Menu functions
Network mode (Menu 9.7.5)
Use this menu to select the network you use.
• Automatic: the phone scans for available
networks.
• GSM 900/1800: the phone operates in the
combined GSM 900/1800 network.
• GSM 1900: the phone operates in the GSM
1900 network. This option is only available in
USA.
• UMTS: the phone operates in UMTS (3G
network) networks. You can get a higher speed
quality than on lower generation networks, and
use advanced data and information services,
such as video calls.
•
•
•
Connections (Menu 9.7.6)
You can set up information about your network
connection. In most cases, you don’t need to change
the settings. In case of problems, please contact
Vodafone.
•
Creating or editing a connection profile
Press and select New, or select the
connection profile you want to edit. The following
options are available:
• Set name: edit the name of the network setting.
• Access name: edit the access point name used
for the address of the GPRS network gateway.
• Auth type: choose the type of authentication
used.
70
•
•
•
•
•
User ID: edit the server login ID.
Password: edit the server password.
Protocol: select the protocol from among WAP,
HTTP, and Other.
Home URL: enter your homepage address.
Proxy address/Port: (for the HTTP protocol)
set the proxy server address and port.
Gateway address: (for the WAP protocol) set
the gateway address.
Secure connection: (for the WAP protocol) turn
the secure mode on or off.
Linger time (sec.): set a time period after
which the network is disconnected if there has
been no new data traffic in that time.
Advanced settings: provide you with the
following options:
Static IP: specify if you want to manually enter
an IP address; see the Local phone IP option. If
you want the IP address to be automatically
assigned by the server, remove the check mark.
Local phone IP: enter the IP address obtained
from the network operator, if you checked the
Static IP option.
Static DNS: specify if you want to manually
enter the DNS (Domain Name Server) address;
see the Server 1/2 option. If you want the
address to be automatically assigned by the
server, remove the check mark.
Server 1/Server 2: enter the Domain Name
Server addresses.
Traffic class: select the traffic class, if you
selected the PS network.
Managing connection profiles
Browser profiles (Menu 9.7.7)
Use this menu to select a connection profile to be
used for accessing the Internet. You can also make
or edit a profile.p. 70
Streaming settings (Menu 9.7.8)
Use this menu to activate a connection profile to be
used for accessing streaming servers to use VOD
(Video on Demand) services. You can also make or
edit a profile.p. 70
If you enter an incorrect PIN/PIN2 three times in
succession, the USIM/SIM card is blocked. To
unblock it, you need to enter your PUK/PUK2
(Personal Unblocking Key). The codes are
supplied by your network operator.
Phone lock (Menu 9.8.1)
The Phone Lock feature locks the phone from
unauthorised use.
Settings (Menu 9)
You cannot edit or delete the default connection
profiles.
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and USIM/SIM card.
Menu functions
On the list of connection profiles, scroll to a profile
and press to access the following
options:
• Edit: edit the selected connection profile.
• New: add a new connection profile.
• Rename: change the name of the selected
connection profile.
• Delete: delete the selected connection profile.
• Restore: restore the changed settings to the
default status.
Security (Menu 9.8)
When this feature is enabled, you must enter a 4- to
8-digit phone password each time the phone is
switched on.
The password is preset to 00000000. To change the
password, use the Change phone password
menu.
SIM lock (Menu 9.8.2)
The SIM Lock feature allows your phone to work only
with the current USIM/SIM by assigning a USIM/SIM
lock code. You must enter the USIM/SIM lock code
to use a different USIM/SIM card.
PIN lock (Menu 9.8.3)
The 4- to 8-digit PIN (Personal Identitication
Number) protects your USIM/SIM card against
unauthorised use. When this feature is enabled, the
phone requires your PIN each time it is switched on.
71
Menu functions
Change phone password (Menu 9.8.4)
Use this menu to change your phone password. The
password is preset to 00000000.
Privacy lock (Menu 9.8.5)
Use this menu to lock your messages media
contents, contacts and call logs.
1. Press
to check the item(s) to lock.
2. Press to lock the marked items.
3. Enter the phone password and press
.
To access a locked item, you need to enter the
phone password.
Change PIN code (Menu 9.8.6)
Use this menu to change your PIN. The PIN Check
feature must be enabled to use this feature.
Change PIN2 code (Menu 9.8.7)
If supported by your USIM/SIM card, the Change
PIN2 feature changes your current PIN2.
Memory status (Menu 9.0)
Use this menu to check the amount of memory
being used for storing data, such as SMS, MMS,
Email, Push messages, My items, Game & More,
Contacts, and Organiser items. You can also view
the amount of shared memory or the memory card.
72
Reset settings (Menu 9. )
Use this menu to reset the phone to its default
settings.
1. Enter the phone password and press
.
The password is preset to 00000000. You
can change this password p. 72
2. Press . The phone automatically turns
itself off and then back on.
Solve problems
Help and personal needs
To save the time and expense of an unnecessary service
call, perform the simple checks in this section before
contacting a service professional.
When you switch on your phone, the
following messages may appear:
“Insert SIM card”
• Be sure that the USIM/SIM card is correctly
installed.
“Phone lock”
• The automatic locking function has been
enabled. You must enter the phone’s password
before you can use the phone.
“Enter PIN”
• You are using your phone for the first time. You
must enter the PIN supplied with the USIM/SIM
card.
• The PIN Check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN lock menu.
“Enter PUK”
• The PIN code was entered incorrectly three times
in succession, and the phone is now blocked.
Enter the PUK supplied by Vodafone.
“No service,” “Network failure,” or “Not
done” displays
• The network connection has been lost. You may
be in a weak signal area. Move and try again.
• You are trying to access an option for which you
have no subscription with Vodafone. Contact
Vodafone for further details.
You have entered a number but it was not
dialled
• Be sure that you have pressed [ ].
• Be sure that you have accessed the right cellular
network.
Your correspondent cannot reach you
• Be sure that your phone is switched on. ([ ]
pressed for more than one second.)
• Be sure that you are accessing the correct
cellular network.
• Be sure that you have not set an incoming call
barring option.
Your correspondent cannot hear you
speaking
• Be sure that you have switched on the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is
located at the bottom of the phone.
73
The phone starts beeping and “Low battery”
flashes on the display
• Your battery is insufficiently charged. Recharge
the battery.
The audio quality of the call is poor
• Check the signal strength indicator on the
display (
). The number of bars indicates the
signal strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer
to a window if you are in a building.
No number is dialled when you re-call a
Phonebook entry
• Use the Contacts Search feature to ensure the
number has been stored correctly.
• Re-store the number, if necessary.
If the above guidelines do not help you to
solve the problem, take note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung aftersales service.
74
Health and safety information
Exposure to Radio Frequency
(RF) Signals
Your wireless phone is a radio transmitter and
receiver. It is designed and manufactured not
to exceed the emission limits for exposure to
radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S.
Government. These limits are part of
comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines are based on the
safety standards that were developed by
independent scientific organizations through
periodic and through evaluation of scientific
studies.
The standards include a substantial safety
margin designed to assure the safety of all
persons, regardless of age and health.
The exposure standard for wireless phones
employs a unit of measurement known as
Specific Absorption Rate (SAR). The SAR limit
set by the FCC is 1.6W/kg*.
*In the U.S. and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg)
averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give
additional protection for the public and to account for
any variations in measurements.
phones and at various positions, they all meet
the government requirement.
The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this
model phone is on file with the FCC and can be
found under the Display Grant section of http://
www.fcc.gov/oet/fccid after searching on FCC ID
printed in the label on the phone.
Health and safety information
SAR tests are conducted using standard
operating positions specified by the FCC with the
phone transmitting at its highest certified power
level in all tested frequency bands. Although the
SAR is determined at the highest certified power
level, the actual SAR level of the phone while
operating can be well below the maximum value.
This is because the phone is designed to operate
at multiple power levels so as to use only the
power required to reach the network. In general,
the closer you are to a wireless base station
antenna, the lower the power output of the
phone. Before a new model phone is available for
sale to the public, it must be tested and certified
to the FCC that it does not exceed the limit
established by the government-adopted
requirement for safe exposure. The tests are
performed in positions and locations (e.g., at the
ear and worn on the body) as required by the
FCC for each model. While there may be
differences between the SAR levels of various
FCC certification information for this model
phone is attached separation paper.
For Body Operation
To maintain compliance with FCC RF exposure
requirements, use only belt-clips, holsters or
similar accessories that maintain a 1.5 cm.
separation distance between the user's body
and the back of the phone, including the antenna.
The use of belt-clips, holsters and similar
accessories should not contain metallic components
in its assembly. The use of accessories that do
not satisfy these requirements may not comply
with FCC RF exposure requirements, and should
be avoided.
75
Health and safety information
For more Information concerning exposure to
radio frequency signals, see the following
websites:
Federal Communications Commission (FCC)
http://www.fcc.gov/rfsafety
Cellular Telecommunications Industry Association
(CTIA):
http://www.wow-com.com
U.S.Food and Drug Administration (FDA)
http://www.fda.gov/cdrh/consumer
World Health Organization (WHO)
http://www.who.int/peh-emf/en
Precautions When Using Batteries
• Never use any charger or battery that is
damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby
time are greatly affected by the signal strength
on the cellular network and the parameters set
by the network operator.
• Battery charging time depends on the
remaining battery charge and the type of
76
battery and charger used. The battery can be
charged and discharged hundreds of times, but
it will gradually wear out. When the operation
time (talk time and standby time) is noticeably
shorter than normal, it is time to buy a new
battery.
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsungapproved chargers. When a charger is not in
use, disconnect it from the power source. Do
not leave the battery connected to a charger
for more than a week, since overcharging may
shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling
or warming first.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter
conditions, as you will reduce the capacity and
lifetime of the battery. Always try to keep the
battery at room temperature. A phone with a
hot or cold battery may temporarily not work,
even when the battery is fully charged. Li-ion
batteries are particularly affected by
temperatures below 0 °ýC (32 °ýF).
• Dispose of used batteries in accordance with
local regulations. Always recycle. Do not
dispose of batteries in a fire.
Road Safety
Your wireless phone gives you the powerful
ability to communicate by voice, almost
anywhere, anytime. But an important
responsibility accompanies the benefits of
wireless phones, one that every user must
uphold.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, practice good common
sense and remember the following tips.
2. When available, use a hands-free device. If
possible, add an extra layer of convenience
and safety to your wireless phone with one of
the many hands-free accessories available
today.
Health and safety information
• Do not short-circuit the battery. Accidental
shortcircuiting can occur when a metallic
object (coin, clip or pen) causes a direct
connection between the + and . terminals of
the battery (metal strips on the battery), for
example when you carry a spare battery in a
pocket or bag. Short-circuiting the terminals
may damage the battery or the object causing
the short-circuiting.
1. Get to know your wireless phone and its
features, such as speed dial and redial. If
available, these features help you to place
your call without taking your attention off the
road.
3. Position your wireless phone within easy
reach. Be able to access your wireless phone
without removing your eyes from the road. If
you get an incoming call at an inconvenient
time, let your voice mail answer it for you.
4. Let the person you are speaking with know
you are driving; if necessary, suspend the call
in heavy traffic or hazardous weather
conditions. Rain, sleet, snow, ice and even
heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers
while driving. Jotting down a To Do list or
flipping through your phonebook takes your
attention away from your primary
responsibility, driving safely.
77
Health and safety information
6. Dial sensibly and assess the traffic; if
possible, place calls when you are not moving
or before pulling into traffic. Try to plan calls
when your car will be stationary. If you need
to make a call while moving, dial only a few
numbers, check the road and your mirrors,
then continue.
7. Do not engage in stressful or emotional
conversations that may be distracting. Make
the people with whom you are talking aware
that you are driving and suspend
conversations that have the potential to
divert your attention from the road.
78
10.Call roadside assistance or a special
nonemergency wireless assistance number
when necessary. If you see a broken-down
vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where
no one appears injured, or a vehicle you know
to be stolen, call roadside assistance or any
other special nonemergency wireless number.
Operating Environment
Remember to follow any special regulations in
force in any area and always switch off your
phone whenever it is forbidden to use it, or when
it may cause interference or danger.
8. Use your wireless phone to call for help. Dial
the emergency number in the case of fire,
traffic accident or medical emergencies.
Remember, it is a free call on your wireless
phone!
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
9. Use your wireless phone to help others in
emergencies. If you see a car accident, crime
in progress or other serious emergency where
lives are in danger, call the emergency
number, as you would want others to do for
you.
As with other mobile radio transmitting
equipment, users are advised that for the
satisfactory operation of the equipment and for
the safety of personnel, it is recommended that
the equipment should only be used in the normal
operating position (held to your ear with the
antenna pointing over your shoulder).
Electronic Devices
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with
the pacemaker. These recommendations are
consistent with the independent research and
recommendations of Wireless Technology
Research.
Persons with pacemakers:
• Should always keep the phone more than 15
cm (6 inches) from their pacemaker when the
phone is switched on
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimize potential interference
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your
hearing aid manufacturer to discuss alternatives.
Other Medical Devices If you use any other
personal medical devices, consult the
manufacturer of your device to determine if it is
adequately shielded from external RF energy.
Your physician may be able to assist you in
obtaining this information. Switch off your phone
in health care facilities when any regulations
posted in these areas instruct you to do so.
Hospitals or health care facilities may be using
equipment that could be sensitive to external RF
energy.
Health and safety information
Most modern electronic equipment is shielded
from radio frequency (RF) signals. However,
certain electronic equipment may not be shielded
against the RF signals from your wireless phone.
Consult the manufacturer to discuss alternatives.
If you have any reason to suspect that
interference is taking place, switch off your
phone immediately.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in
motor vehicles. Check with the manufacturer or
its
79
Health and safety information
representative regarding your vehicle. You
should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Switch off your phone in any facility where
posted notices require you to do so.
Potentially Explosive Atmospheres
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all
signs and instructions. Sparks in such areas
could cause an explosion or fire resulting in
bodily injury or even death. Users are advised to
switch off the phone while at a refueling point
(service station).
Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel
depots (fuel storage and distribution areas),
chemical plants or where blasting operations are
in progress.
Areas with a potentially explosive atmosphere
are often but not always clearly marked. They
include below deck on boats, chemical transfer or
storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane),
80
areas where the air contains chemicals or
particles, such as grain, dust or metal powders,
and any other area where you would normally be
advised to turn off your vehicle engine.
Emergency calls
This phone, like any wireless phone, operates
using radio signals, wireless and landline
networks, as well as user-programmed functions,
which cannot guarantee connection in all
conditions. Therefore, you should never rely
solely on any wireless phone for essential
communications (medical emergencies, for
example).
Remember, to make or receive any calls the
phone must be switched on and in a service area
with adequate signal strength. Emergency calls
may not be possible on all wireless phone
networks or when certain network services and/
or phone features are in use. Check with local
service providers.
To make an emergency call, proceed as follows.
1. If the phone is not on, switch it on.
2. Key in the emergency number for your
present location (for example, 112 or any
other official emergency number). Emergency
numbers vary by location.
3. Press the
key.
Other important safety information
• Only qualified personnel should service the
phone or install the phone in a vehicle. Faulty
installation or service may be dangerous and
may invalidate any warranty applicable to the
device.
• For vehicles equipped with an air bag,
remember that an air bag inflates with great
force. Do not place objects, including both
installed or portable wireless equipment in the
area over the air bag or in the air bag
deployment area. If wireless equipment is
improperly installed and the air bag inflates,
serious injury could result.
Settings (Menu
When making an emergency call, remember to
give all the necessary information as accurately
as possible. Remember that your phone may be
the only means of communication at the scene of
an accident; do not end the call until given
permission to do so.
• Do not store or carry flammable liquids, gases,
or explosive materials in the same
compartment as the phone, its parts, or
accessories.
Health and safety information
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
• Switch off your phone before boarding an
aircraft. The use of wireless phones in aircraft
may be dangerous to the operation of the
aircraft, and is illegal.
• Failure to observe these instructions may lead
to the suspension or denial of telephone
services to the offender, or legal action, or
both.
Care and maintenance
81
Health and safety information
Your phone is a product of superior design and
craftsmanship and should be treated with care.
The suggestions below will help you fulfill any
warranty obligations and allow you to enjoy this
product for many years.
• Keep the phone and all its parts and
accessories out of the reach of small children.
• Do not use harsh chemicals, cleaning solvents,
or strong detergents to clean the phone. Wipe
it with a soft cloth slightly dampened in a mild
soap-and-water solution.
• Keep the phone dry. Precipitation, humidity,
and liquids contain minerals that will corrode
electronic circuits.
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Do not use the phone with a wet hand. Doing
so may cause an electric shock to you or
damage to the phone.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove, or a
radiator. The phone may explode when
overheated.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s
electronic circuit boards.
82
• Do not drop, knock, or shake the phone.
Rough handling can break internal circuit
boards.
• Use only the supplied or an approved
replacement antenna. Unauthorised antennas
or modified accessories may damage the
phone and violate regulations governing radio
devices.
• If the phone, battery, charger, or any
accessory is not working properly, take it to
your nearest qualified service facility. The
personnel there will assist you, and if
necessary, arrange for service.
Acknowledging Special Precautions and
the FCC and Industry Canada Notice
Cautions
Modifications not expressly approved by the party
responsible for compliance could void the user's
authority to operate the equipment.
However, there is no guarantee that interference will
not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
1. This device may not cause harmful
interference, and
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
2. This device must accept any interference
received.
Information to User
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced radio/ TV
technician for help.
Settings (Menu
Including interference that may cause undesired
operation.
Health and safety information
FCC Compliance Information
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
Appendix A: CERTIFICATION
INFORMATION (SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO
WAVES.
Your wireless phone is a radio transmitter and
receiver. It is designed and manufactured not to
exceed the emission limits for exposure to radio
frequency(RF) energy set by the Federal
Communications Commission of the U.S.
83
Health and safety information
Government. These limits are part of
comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines are based on safety
standards that were developed by independent
scientific organizations through periodic and
thorough evaluation of scientific studies. The
standards include a substantial safety margin
designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile
phones employs a unit of measurement known
as the Specific Absorption Rate(SAR). The SAR
limit set by the FCC is 1.6 W/kg. SAR Tests are
conducted using standard operating positions
accepted by the FCC with the phone transmitting
at its highest certified power level in all tested
frequency bands. Although the SAR is
determined at the highest certified power level,
the actual SAR level of the phone while operating
can be well below the maximum value. This is
because the phone is designed to operate at
multiple power levels so as to use only the power
required to reach the network. In general, the
closer you are to a wireless base station antenna,
the lower the power output.
84
Before a new model phone is available for sale to
the public, it must be tested and certified to the
FCC that it does not exceed the limit established
by the governmentadopted requirement for safe
exposure. The tests are performed in positions
and locations(e.g., at the ear and worn on the
body) as required by the FCC for each model.
The highest SAR values for this model phone as
reported to the FCC are Head: 0.937 W/Kg,
Body-worn: 0.452 W/Kg.
The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this
model phone is on file with the FCC and can be
found under the Display Grant section of http://
www.fcc.gov/oet/fccid after searching on FCC ID
A3LSGHZV30.
Appendix B: Guide to Safe and
Responsible Wireless Phone Use
Cellular Telecommunications & Internet Association
“Safety is the most important call you will ever
make.”
sense-keep your head up, keep your eyes on the
road, check your mirrors frequently and watch out
for other drivers. It requires obeying all traffic signs
and signals and staying within the speed limit. It
means using seat belts and requiring other
passengers to do the same.
But with wireless phone use, driving safely means a
little more. This brochure is a call to wireless phone
users everywhere to make safety their first priority
when behind the wheel of a car. Wireless
telecommunications is keeping us in touch,
simplifying our lives, protecting us in emergencies
and providing opportunities to help others in need.
When it comes to the use of wireless phones, safety
is your most important call.
But an important responsibility accompanies those
benefits, one that every wireless phone user must
uphold. When driving a car, driving is your first
responsibility. A wireless phone can be an invaluable
tool, but good judgment must be exercised at all
times while driving a motor vehicle whether on the
phone or not.
1. Get to know your wireless phone and its
features such as speed dial and redial.
Carefully read your instruction manual and
learn to take advantage of valuable features
most phones offer, including automatic redial
and memory. Also, work to memorize the
phone keypad so you can use the speed dial
function without taking your attention off the
road.
Wireless Phone “Safety Tips”
Below are safety tips to follow while driving and
using a wireless phone which should be easy to
remember:
Settings (Menu
The basic lessons are ones we all learned as
teenagers. Driving requires alertness, caution and
courtesy. It requires a heavy dose of basic common
Health and safety information
A Guide to Safe and Responsible Wireless
Phone Use
TENS OF MILLIONS OF PEOPLE IN THE U.S. TODAY
TAKE ADVANTAGE OF THE UNIQUE COMBINATION
OF CONVENIENCE, SAFETY AND VALUE DELIVERED
BY THE WIRELESS TELEPHONE. QUITE SIMPLY, THE
WIRELESS PHONE GIVES PEOPLE THE POWERFUL
ABILITY TO COMMUNICATE BY VOICE-ALMOST
ANYWHERE, ANYTIME-WITH THE BOSS, WITH A
CLIENT, WITH THE KIDS, WITH EMERGENCY
PERSONNEL OR EVEN WITH THE POLICE. EACH
YEAR, AMERICANS MAKE BILLIONS OF CALLS FROM
THEIR WIRELESS PHONES, AND THE NUMBERS ARE
RAPIDLY GROWING.
85
Health and safety information
2. When available, use a hands free device. A
number of hands free wireless phone
accessories are readily available today.
Whether you choose an installed mounted
device for your wireless phone or a speaker
phone accessory, take advantage of these
devices if available to you.
3. Position your wireless phone within easy
reach. Make sure you place your wireless
phone within easy reach and where you can
grab it without removing your eyes from the
road. If you get an incoming call at an
inconvenient time, if possible, let your voice
mail answer it for you.
4. Suspend conversations during hazardous
driving conditions or situations. Let the
person you are speaking with know you are
driving; if necessary, suspend the call in
heavy traffic or hazardous weather
conditions. Rain, sleet, snow and ice can be
hazardous, but so is heavy traffic. As a driver,
your first responsibility is to pay attention to
the road.
5. Do not take notes or look up phone numbers
while driving. If you are reading an address
book or business card, or writing a “to do” list
86
while driving a car, you are not watching
where you are going. It’s common sense.
Don’t get caught in a dangerous situation
because you are reading or writing and not
paying attention to the road or nearby
vehicles.
6. Dial sensibly and assess the traffic; if
possible, place calls when you are not moving
or before pulling into traffic. Try to plan your
calls before you begin your trip or attempt to
coincide your calls with times you may be
stopped at a stop sign, red light or otherwise
stationary. But if you need to dial while
driving, follow this simple tip-dial only a few
numbers, check the road and your mirrors,
then continue.
7. Do not engage in stressful or emotional
conversations that may be distracting.
Stressful or emotional conversations and
driving do not mix-they are distracting and
even dangerous when you are behind the
wheel of a car. Make people you are talking
with aware you are driving and if necessary,
suspend conversations which have the
potential to divert your attention from the
road.
10.Call roadside assistance or a special wireless
non emergency assistance number when
necessary. Certain situations you encounter
while driving may require attention, but are
not urgent enough to merit a call for
emergency services. But you still can use
your wireless phone to lend a hand. If you see
a broken-down vehicle posing no serious
hazard, a broken traffic signal, a minor traffic
Careless, distracted individuals and people driving
irresponsibly represent a hazard to everyone on the
road. Since 1984, the Cellular Telecommunications
Industry Association and the wireless industry have
conducted educational outreach to inform wireless
phone users of their responsibilities as safe drivers
and good citizens. As we approach a new century,
more and more of us will take advantage of the
benefits of wireless telephones. And, as we take to
the roads, we all have a responsibility to drive
safely.
“The wireless industry reminds you to use your
phone safely when driving.”
Settings (Menu
9. Use your wireless phone to help others in
emergencies. Your wireless phone provides
you a perfect opportunity to be a “Good
Samaritan” in your community. If you see an
auto accident, crime in progress or other
serious emergency where lives are in danger,
call 9-1-1 or other local emergency number,
as you would want others to do for you.
accident where no one appears injured or a
vehicle you know to be stolen, call roadside
assistance or other special non-emergency
wireless number.
Health and safety information
8. Use your wireless phone to call for help. Your
wireless phone is one of the greatest tools
you can own to protect yourself and your
family in dangerous situations-with your
phone at your side, help is only three
numbers away. Dial 9-1-1 or other local
emergency number in the case of fire, traffic
accident, road hazard or medical emergency.
Remember, it is a free call on your wireless
phone!
Cellular Telecommunications & Internet Association
For more information, please call 1-888-901-SAFE.
For updates: http://www.wow-com.com/consumer/
issues/driving/articles.cfm?ID =85
Appendix C: Consumer Update on
Wireless Phones
U.S. Food and Drug Administration
1. What kinds of phones are the subject of this
update?
87
Health and safety information
The term wireless phone refers here to hand-held
wireless phones with built-in antennas, often called
cell, mobile, or PCS phones. These types of wireless
phones can expose the user to measurable radio
frequency energy (RF) because of the short distance
between the phone and the user s head. These RF
exposures are limited by Federal Communications
Commission safety guidelines that were developed
with the advice of FDA and other federal health and
safety agencies. When the phone is located at
greater distances from the user, the exposure to RF
is drastically lower because a person’s RF exposure
decreases rapidly with increasing distance from the
source. The so-called “cordless phones,” which have
a base unit connected to the telephone wiring in a
house, typically operate at far lower power levels,
and thus produce RF exposures well within the FCC’s
compliance limits.
2. Do wireless phones pose a health hazard?
The available scientific evidence does not show that
any health problems are associated with using
wireless phones. There is no proof, however, that
wireless phones are absolutely safe. Wireless
phones emit low levels of radio frequency energy
(RF) in the microwave range while being used. They
also emit very low levels of RF when in the stand-by
mode. Whereas high levels of RF can produce health
effects (by heating tissue), exposure to low level RF
that does not produce heating effects causes no
known adverse health effects. Many studies of low
88
level RF exposures have not found any biological
effects. Some studies have suggested that some
biological effects may occur, but such findings have
not been confirmed by additional research. In some
cases, other researchers have had difficulty in
reproducing those studies, or in determining the
reasons for inconsistent results.
3. What is FDA’s role concerning the safety of
wireless phones?
Under the law, FDA does not review the safety of
radiation emitting consumer products such as
wireless phones before they can be sold, as it does
with new drugs or medical devices. However, the
agency has authority to take action if wireless
phones are shown to emit radio frequency energy
(RF) at a level that is hazardous to the user. In such
a case, FDA could require the manufacturers of
wireless phones to notify users of the health hazard
and to repair, replace or recall the phones so that
the hazard no longer exists.
Although the existing scientific data do not justify
FDA regulatory actions, FDA has urged the wireless
phone industry to take a number of steps, including
the following:
• Support needed research into possible
biological effects of RF of the type emitted by
wireless phones;
• Design wireless phones in a way that
minimizes any RF exposure to the user that is
not necessary for device function; and
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at
the federal level. The following agencies belong to
this working group:
• National Institute for Occupational Safety and
Health
• Occupational Safety and Health Administration
• National Telecommunications and Information
Administration
• The National Institutes of Health participates in
some interagency working group activities, as
well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications
Commission (FCC). All phones that are sold in the
United States must comply with FCC safety
4. What is FDA doing to find out more about the
possible health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
Settings (Menu
• Environmental Protection Agency Federal
Communications Commission
FCC also regulates the base stations that the
wireless phone networks rely upon. While these
base stations operate at higher power than do the
wireless phones themselves, the RF exposures that
people get from these base stations are typically
thousands of times lower than those they can get
from wireless phones. Base stations are thus not the
primary subject of the safety questions discussed in
this document.
Health and safety information
• Cooperate in providing users of wireless
phones with the best possible information on
possible effects of wireless phone use on
human health
guidelines that limit RF exposure. FCC relies on FDA
and other health agencies for safety questions about
wireless phones.
FDA has been a leading participant in the World
Health Organization International Electromagnetic
Fields (EMF) Project since its inception in 1996. An
influential result of this work has been the
development of a detailed agenda of research needs
that has driven the establishment of new research
programs around the world. The Project has also
helped develop a series of public information
documents on EMF issues.
89
Health and safety information
FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative
Research and Development Agreement (CRADA) to
do research on wireless phone safety. FDA provides
the scientific oversight, obtaining input from experts
in government, industry, and academic
organizations. CTIA-funded research is conducted
through contracts to independent investigators. The
initial research will include both laboratory studies
and studies of wireless phone users. The CRADA will
also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
5. What steps can I take to reduce my exposure to
radio frequency energy from my wireless phone?
If there is a risk from these products—and at this
point we do not know that there is—it is probably
very small. But if you are concerned about avoiding
even potential risks, you can take a few simple steps
to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much
exposure a person receives, reducing the amount of
time spent using a wireless phone will reduce RF
exposure.
If you must conduct extended conversations by
wireless phone every day, you could place more
distance between your body and the source of the
RF, since the exposure level drops off dramatically
with distance. For example, you could use a headset
and carry the wireless phone away from your body
90
or use a wireless phone connected to a remote
antenna
Again, the scientific data do not demonstrate that
wireless phones are harmful. But if you are
concerned about the RF exposure from these
products, you can use measures like those described
above to reduce your RF exposure from wireless
phone use.
6. What about children using wireless phones?
The scientific evidence does not show a danger to
users of wireless phones, including children and
teenagers. If you want to take steps to lower
exposure to radio frequency energy (RF), the
measures described above would apply to children
and teenagers using wireless phones. Reducing the
time of wireless phone use and increasing the
distance between the user and the RF source will
reduce RF exposure.
Some groups sponsored by other national
governments have advised that children be
discouraged from using wireless phones at all. For
example, the government in the United Kingdom
distributed leaflets containing such a
recommendation in December 2000. They noted
that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their
recommendation to limit wireless phone use by
children was strictly precautionary; it was not based
on scientific evidence that any health hazard exists.
7. Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason
to believe that accessories that claim to shield the
head from those emissions reduce risks. Some
products that claim to shield the user from RF
absorption use special phone cases, while others
involve nothing more than a metallic accessory
attached to the phone. Studies have shown that
these products generally do not work as advertised.
Unlike “hand-free” kits, these so-called “shields”
9. What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones
can interact with some electronic devices. For this
reason, FDA helped develop a detailed test method
to measure electromagnetic interference (EMI) of
implanted cardiac pacemakers and defibrillators
from wireless telephones. This test method is now
part of a standard sponsored by the Association for
the Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by FDA,
medical device manufacturers, and many other
groups, was completed in late 2000. This standard
will allow manufacturers to ensure that cardiac
pacemakers and defibrillators are safe from wireless
phone EMI.
Settings (Menu
8. Do wireless phone accessories that claim to
shield the head from RF radiation work?
Health and safety information
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason
to believe that hands-free kits reduce risks. Handsfree kits can be used with wireless phones for
convenience and comfort. These systems reduce the
absorption of RF energy in the head because the
phone, which is the source of the RF emissions, will
not be placed against the head. On the other hand,
if the phone is mounted against the waist or other
part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones
marketed in the U.S. are required to meet safety
requirements regardless of whether they are used
against the head or against the body. Either
configuration should result in compliance with the
safety limit.
may interfere with proper operation of the phone.
The phone may be forced to boost its power to
compensate, leading to an increase in RF
absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold
devices that claimed to protect wireless phone users
from radiation with making false and
unsubstantiated claims. According to FTC, these
defendants lacked a reasonable basis to substantiate
their claim.
FDA has tested hearing aids for interference from
handheld wireless phones and helped develop a
voluntary standard sponsored by the Institute of
Electrical and Electronic Engineers (IEEE). This
91
Health and safety information
standard specifies test methods and performance
requirements for hearing aids and wireless phones
so that no interference occurs when a person uses a
compatible phone and a compatible hearing aid at
the same time. This standard was approved by the
IEEE in 2000.
FDA continues to monitor the use of wireless phones
for possible interactions with other medical devices.
Should harmful interference be found to occur, FDA
will conduct testing to assess the interference and
work to resolve the problem.
10. What are the results of the research done
already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws
in their research methods. Animal experiments
investigating the effects of radio frequency energy
(RF) exposures characteristic of wireless phones
have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies,
however, have suggested that low levels of RF could
accelerate the development of cancer in laboratory
animals. However, many of the studies that showed
increased tumor development used animals that had
been genetically engineered or treated with cancer
causing chemicals so as to be pre-disposed to
develop cancer in the absence of RF exposure. Other
studies exposed the animals to RF for up to 22 hours
per day. These conditions are not similar to the
conditions under which people use wireless phones,
92
so we don t know with certainty what the results of
such studies mean for human health.
Three large epidemiology studies have been
published since December 2000. Between them, the
studies investigated any possible association
between the use of wireless phones and primary
brain cancer, gioma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland,
leukemia, or other cancers. None of the studies
demonstrated the existence of any harmful health
effects from wireless phone RF exposures. However,
none of the studies can answer questions about
long-term exposures, since the average period of
phone use in these studies was around three years.
11. What research is needed to decide whether RF
exposure from wireless phones poses a health
risk?
A combination of laboratory studies and
epidemiological studies of people actually using
wireless phones would provide some of the data that
are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large
numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one
exists. Epidemiological studies can provide data that
is directly applicable to human populations, but 10
or more years follow-up may be needed to provide
answers about some health effects, such as cancer.
This is because the interval between the time of
exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many
years. The interpretation of epidemiological studies
is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones.
Many factors affect this measurement, such as the
angle at which the phone is held, or which model of
phone is used.
International Commission on Non-Ionizing Radiation
Protection:
http://www.icnirp.de
National Radiation Protection Board (UK):
http://www.nrpb.org.uk*
Health and safety information
12. Which other federal agencies have
responsibilities related to potential RF health
effects?
Additional information on the safety of RF exposures
from various sources can be obtained from the
following organizations.
FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
Settings (Menu
Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
Occupational Safety and Health Administration’s
(OSHA):
http://www.osha-slc.gov/SLTC/
radiofrequencyradiation/index.html
National Institute for Occupational Safety and Health
(NIOSH):
http://www.cdc.gov/niosh/emfpg.html
World health Organization (WHO):
http://www.who.int/peh-emf/
* Updated 4/3/2002: US Food and Drug Administration
http://www.fda.gov/cellphones
93
Index
ABC mode, text input • 24
Answering
call • 25, 28
second call • 26
Anykey answer • 63
Auto redial • 65
Backlight time, set • 64
Battery
charging • 7
low indicator • 8
precautions • 75
Bluetooth
receiving, data • 69
sending, data • 69
settings • 68
Browser, WAP • 30
Calculator • 57
Caller group, managing • 60
Calls
answering • 25, 28
holding • 26
redialling • 25
rejecting • 25
Camera
photos • 34
videos • 36
Characters, enter • 23
Conference call • 28
Configuration • 41
Connection tone • 62
Contacts
copying • 61
editing • 58, 59
options • 58
setting • 61
speed-dialling • 60, 66
Conversion • 58
Creating messages
e-mail • 39
MMS • 38
Creating organiser
anniversaries • 54
events • 53
memos • 54
tasks • 54
Deleting
contacts • 59
e-mails • 42
events • 55
missed alarms • 55
MMS messages • 40
SMS messages • 40
video clips • 37
Delivery reports, message • 45
Display
language • 63
settings • 63
DTMF tones, send • 27
E-mails
creating/sending • 39
deleting • 42
settings • 45
viewing • 42
Emergency calls • 78
Forwarding
e-mails • 42
MMS messages • 40
Games • 29
Greeting message • 63
Health and safety • 74
Holding, call • 26
Icons, description • 10
Images, downloaded • 47
Inbox, messages
configuration • 41
e-mail • 42
MMS • 39
SMS • 39
web • 41
Infrared, connect • 69
International calls • 25
Internet • 30
key tone volume • 62
Keypad tones
sending • 27
setting • 62
Language, select • 63
Last number, redial • 25
Locking
media contents • 72
phone • 72
SIM card • 71
94
Loudspeaker • 26
Low battery indicator • 8
Names
entering • 23
searching • 58
Network selection • 69
Organiser • 52
Password
Received messages
configuration • 41
e-mail • 42
MMS • 39
SMS • 39
web • 41
Recording
vidoes • 36
voice memos • 55
Redialling
automatically • 65
manually • 25
Resetting phone • 72
Ringtones, downloaded • 50
Road safety • 76
Roaming • 69
Safety
information • 74
SIM card
inserting • 7
locking • 71
SMS messages
creating/sending • 39
deleting • 40
settings • 45
viewing • 39
Sound settings • 61
Sounds, downloaded • 51
Speed-dial • 60, 66
Switching on/off
microphone • 27
phone • 8
Index
Memory status
contacts • 61
messages • 47
phone • 72
scheduled events • 58
Message tone • 62
Messages
configuration • 41
greeting • 63
MMS • 38
web • 41
Minute minder • 62
Missed alarm events • 55
MMS messages
creating/sending • 38
deleting • 40
settings • 44
viewing • 40
Multi-party calls • 28
Muting
key tones • 27
microphone • 27
barring • 66
phone • 72
Phone
care and maintenance • 79
display • 10
icons • 10
locking • 72
password • 72
resetting • 72
switching on/off • 8
unpacking • 6
Photos
deleting • 36
editing • 47
taking • 34
viewing • 47
PIM sync
creating a profile • 57
starting • 57
PIN, change • 72
PIN2, change • 72
Power on/off tone • 62
Privacy • 72
Problems, solve • 73
Profiles • 61
Templates
MMS • 43
text • 43
Text input mode, change • 23
Text, enter • 23
Tone
connect • 62
keypad • 62
message • 62
minute minder • 62
power on • 62
95
V
Video calls
making • 28
setting • 66
Video clips
deleting • 49
playing • 49
recording • 36
Voice mail server • 47
Voice memos
playing • 55
recording • 55
Wallpaper • 63
WAP browser • 30
World time • 57
96
Declaration of Conformity (R&TTE)
GSM900/GSM1800/WCDMA
For the following product:
Portable Cellular Telephone
(Product Name)
SGH-ZV30
(Model Number)
Samsung Electronics Co., Ltd, 94-1 Imsu-Dong, Gumi City, Kyung Buk, Korea, 730-350
Manufactured at:
(factory name, address*)
to which this declaration relates, is in conformity with the following standards and/or other
normative documents.
Safety
EMC
SAR
Network
We hereby declare the [all essential radio test suites have been carried out and that] the above
named product is in conformity to all the essential requirements of Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10 and detailed in Annex[IV] of
Directive 1999/5/EC has been followed with the involvement of the following Notified Body(ies):
BABT, Claremont House, 34 Molesey Road,
Walton-on-Thames, KT12 4RQ, UK
Identification mark: 168
The technical documentation kept at:
Samsung Electronics Euro QA Lab.
which will be made available upon request.
(Representative in the EU)
(name and signature of authorised person)
Samsung Electronics Euro QA Lab.
Blackbushe Business Park, Saxony Way,
Yateley, Hampshire, GU46 6GG, UK
(place and date of issue)
*This is not the address of the Samsung Service Centre. For the address or the phone number of the Samsung Service
Centre, see the warranty card or contact the retailer where you purchased your phone.
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.4
Linearized : No
Modify Date : 2005:05:11 12:11:51-03:00
Create Date : 2005:05:11 12:03:11-03:00
Title : <443A5C31BEF7B9AB5C3147534D5C30325F474346C0DAB7E15CC1D8BAF1BCAD2E2E2E>
Author :
Creator : PScript5.dll Version 5.2
Producer : Acrobat Distiller 6.0 (Windows)
Page Count : 100
Mod Date : 2005:05:11 12:11:51-03:00
Creation Date : 2005:05:11 12:03:11-03:00
Metadata Date : 2005:05:11 12:11:51-03:00
EXIF Metadata provided by EXIF.tools
